Dual enhancement of electroluminescence efficiency and operational stability by rapid upconversion of triplet excitons in OLEDs

Dual Charge-Transfer Emission in Chalcone-Based Donor-π-Acceptor System and the Modulation of Down-Conversion of Triplet Exciton with the Polarity of the Medium

Thermally activated delayed fluorescence (TADF) has recently emerged as a promising process with significant potential to advance organic light-emitting diodes (OLEDs) for display applications. The donor-acceptor system is a well-known molecular arrangement exhibiting TADF properties. However, our investigation into the chalcone-based donor-π-acceptor (D-π-A) system (SKG1) reveals that the en-one bridging unit in chalcone plays a crucial role in the reverse intersystem crossing (rISC) process and may be responsible for the existence of two conformational isomers. In stark contrast with the conventional endothermic TADF process, the designed molecule follows a down-converted cold rISC pathway that also from a higher-lying triplet (Tn) state to the lowest singlet (S1) state (in toluene) with remarkably short delayed fluorescence lifetime of 350 ns. Additionally, this rISC process is found to be sensitive to the polarity of the medium. The UV-vis-NIR transient absorption spectroscopy reveals an ultrafast intersystem crossing (ISC) process within <100 ps and the involvement of higher lying triplet state in rISC process. This comprehensive research deepens the understanding of the rISC mechanism and paves the way for developing next-generation OLED materials using D-π-A-based delayed emitters.

Advancing efficiency in deep-blue OLEDs: Exploring a machine learning-driven multiresonance TADF molecular design

The pursuit of boron-based organic compounds with multiresonance (MR)-induced thermally activated delayed fluorescence (TADF) is propelled by their potential as narrowband blue emitters for wide-gamut displays. Although boron-doped polycyclic aromatic hydrocarbons in MR compounds share common structural features, their molecular design traditionally involves iterative approaches with repeated attempts until success. To address this, we implemented machine learning algorithms to establish quantitative structure-property relationship models, predicting key optoelectronic characteristics, such as full width at half maximum (FWHM) and main peak wavelength, for deep-blue MR candidates. Using these methodologies, we crafted ν-DABNA-O-xy and developed deep-blue organic light-emitting diodes featuring a Commission Internationale de l'Eclairage y of 0.07 and an FWHM of 19 nm. The maximum external quantum efficiency reached ca. 27.5% with a binary emission layer, which increased to 41.3% with the hyperfluorescent architecture, effectively mitigating efficiency roll-off. These findings are expected to guide the systematic design of MR-type TADF clusters, unlocking their full potential.

The Golden Age of Thermally Activated Delayed Fluorescence Materials: Design and Exploitation

Since the seminal report by Adachi and co-workers in 2012, there has been a veritable explosion of interest in the design of thermally activated delayed fluorescence (TADF) compounds, particularly as emitters for organic light-emitting diodes (OLEDs). With rapid advancements and innovation in materials design, the efficiencies of TADF OLEDs for each of the primary color points as well as for white devices now rival those of state-of-the-art phosphorescent emitters. Beyond electroluminescent devices, TADF compounds have also found increasing utility and applications in numerous related fields, from photocatalysis, to sensing, to imaging and beyond. Following from our previous review in 2017 ( Adv. Mater. 2017, 1605444), we here comprehensively document subsequent advances made in TADF materials design and their uses from 2017-2022. Correlations highlighted between structure and properties as well as detailed comparisons and analyses should assist future TADF materials development. The necessarily broadened breadth and scope of this review attests to the bustling activity in this field. We note that the rapidly expanding and accelerating research activity in TADF material development is indicative of a field that has reached adolescence, with an exciting maturity still yet to come.

Evolution of Organic Light Emitting Diode (OLED) Materials and their Impact on Display Technology

Organic light-emitting diodes (OLEDs) have revolutionized display and lighting technologies, offering unparalleled design, device flexibility, vibrant colors, and energy efficiency. In this comprehensive review we elucidate the evolution of OLED technology, summarizing its progression from the fundamental principles of fluorescence (1st generation) and phosphorescence (2nd generation) to the emergence of thermally activated delayed fluorescence (TADF) (3rd generation), hyper fluorescence (4th generation), and exceptional future generation OLEDs. This review highlights the development and challenges of early-generation OLEDs, scrutinizing their mechanisms, emitters, and limitations. As TADF OLEDs mark a significant paradigm shift, we explore their enhanced efficiency and potential for cost-effective production without the involvement of toxic heavy metals. Building upon this foundation this review explores the burgeoning concepts of hyper-fluorescence and future-generation OLEDs, poised to push the boundaries of color purity, efficiency, and operational stability. This consolidated comprehensive exploration described herein may provide enormous information for designing future-generation OLED materials for sustainable development.

A perspective on next-generation hyperfluorescent organic light-emitting diodes

Hyperfluorescence, also known as thermally activated delayed fluorescence (TADF) sensitized fluorescence, is known as a next-generation efficient and innovative process for high-performance organic light-emitting diodes (OLEDs). High external quantum efficiency (EQE) and good color purity are crucial parameters for display applications. Hyperfluorescent OLEDs (HF-OLEDs) take the lead in this respect as they utilize the advantages of both TADF emitters and fluorescent dopants, realizing high EQE with color saturation and long-term stability. Hyperfluorescence is mediated through Förster resonance energy transfer (FRET) from a TADF sensitizer to the final fluorescent emitter. However, competing loss mechanisms such as Dexter energy transfer (DET) of triplet excitons and direct charge trapping on the final emitter need to be mitigated in order to achieve fluorescence emission with high efficiency. Despite tremendous progress, appropriate guidelines and fine optimization are still required to address these loss channels and to improve the device operational lifetime. This perspective aims to provide an overview of the evolution of HF-OLEDs by reviewing both molecular and device design pathways for highly efficient narrowband devices covering all colors of the visible spectrum. Existing challenges and potential solutions, such as molecules with peripheral inert substitution, multi-resonant (MR) TADF emitters as final dopants, and exciplex-sensitized HF-OLEDs, are discussed. Furthermore, the operational device lifetime is reviewed in detail before concluding with suggestions for future device development.

Spin-Flip-Restricted Multiple-Resonance Emitters for Extended Device Lifetime in Indolocarbazole-Based Blue Organic Light-Emitting Diodes

In this study, a multiple-resonance (MR) core structure is developed with a spin-flip-restricted emission mechanism based on a fused indolo[3,2,1-jk]carbazole (ICz) framework as emitters to improve the lifetime of blue organic light-emitting diodes. The molecular skeleton modulation approach applied to the conjugated π-system effectively stabilizes the triplet energy of the fused ICz emitters and narrows the full-width-at-half maximum (<20 nm). In addition, the emitters exhibit higher exciton stability than conventional boron-based MR emitters. The fused ICz-based blue fluorescent device exhibits a high external quantum efficiency of 7.2%, a blue index of 68.6 cd A-1 at a Commission internationale de l'éclairage y coordinate (CIEy) of 0.075, and a device lifetime 1.8 times longer than that of a boron-based emitter. In addition, a phosphor-sensitized fluorescent device based on the ICz emitter exhibited an improved external quantum efficiency of 20.6% with a CIEy coordinate of 0.076.

Effect of intramolecular energy transfer in a dual-functional molecular dyad on the performance of solution-processed TADF OLEDs

This paper introduces the design concept of a dual-functional molecular dyad tailored specifically for solution-processable organic light-emitting diodes (OLEDs). Cy-tmCPBN, characterized by an asymmetric molecular dyad structure, integrates a host unit (tmCP) and a multiple-resonance (MR) emitter (CzBN) via a non-conjugated cyclohexane linker. Cy-tmCPBN exhibited efficient intramolecular energy transfers (EnTs) from tmCP to the CzBN unit, as confirmed by time-resolved fluorescence experiments. The fluorescence lifetime of the tmCP unit was approximately three times shorter in a highly diluted solution of Cy-tmCPBN than in a mixed solution of Cy-tmCP and Cy-CzBN. In addition, Cy-tmCPBN exhibited excellent solubility and film-forming ability, making it suitable for solution processing. Notably, OLEDs utilizing Cy-tmCPBN achieved over twice the brightness and improved external quantum efficiency of 12.3% compared to OLEDs using Cy-CzBN with the same concentration of CzBN in the emitting layer. The improved OLED performance can be explained by the increased EnT efficiency from Cy-tmCP to Cy-tmCPBN and the intramolecular EnT within Cy-tmCPBN. In our dual-functional dyad, incorporating both host and emitter units in an asymmetric molecular dyad structure, we induced a positive synergy effect with the host moiety, enhancing OLED performance through intramolecular EnT.

Achieving pure room temperature phosphorescence (RTP) in phenoselenazine-based organic emitters through synergism among heavy atom effect, enhanced n → π* transitions and magnified electron coupling by the A-D-A molecular configuration

The weak spin-orbit coupling (SOC) in metal-free organic molecules poses a challenge in achieving phosphorescence emission. To attain pure phosphorescence in RTP organic emitters, a promising molecular design concept has been proposed. This involves incorporating n → π* transitions and leveraging the heavy atomic effect within the spin-orbit charge transfer-induced intersystem crossing (SOCT-ISC) mechanism of bipolar molecules. Following this design concept, two bipolar metal-free organic molecules (PhSeB and PhSeDB) with donor-acceptor (D-A) and acceptor-donor-acceptor (A-D-A) configurations have been synthesized. When the molecular configuration changes from D-A to A-D-A, PhSeDB exhibits stronger electron coupling and n → π* transitions, which can further enhance the spin-orbit coupling (SOC) together with the heave atom effect from the selenium atom. By the advanced synergism among enhanced n → π* transitions, heavy atom effect and magnified electron coupling to efficiently promote phosphorescence emission, PhSeDB can achieve pure RTP emission in both the solution and doped solid film. Thanks to the higher spin-orbit coupling matrix elements (SOCMEs) for T1 ↔ S0, PhSeDB attains the highest phosphorescence quantum yield (ca. 0.78) among all the RTP organic emitters reported. Consequently, the purely organic phosphorescent light-emitting diodes (POPLEDs) based on PhSeDB achieve the highest external quantum efficiencies of 18.2% and luminance of 3000 cd m-2. These encouraging results underscore the significant potential of this innovative molecular design concept for highly efficient POPLEDs.

Stable pure-green organic light-emitting diodes toward Rec.2020 standard

Manipulating dynamic behaviours of charge carriers and excitons in organic light-emitting diodes (OLEDs) is essential to simultaneously achieve high colour purity and superior operational lifetime. In this work, a comprehensive transient electroluminescence investigation reveals that incorporating a thermally activated delayed fluorescence assistant molecule with a deep lowest unoccupied molecular orbital into a bipolar host matrix effectively traps the injected electrons. Meanwhile, the behaviours of hole injection and transport are still dominantly governed by host molecules. Thus, the recombination zone notably shifts toward the interface between the emissive layer (EML) and the electron-transporting layer (ETL). To mitigate the interfacial carrier accumulation and exciton quenching, this bipolar host matrix could serve as a non-barrier functional spacer between EML/ETL, enabling the distribution of recombination zone away from this interface. Consequently, the optimized OLED exhibits a low driving voltage, promising device stability (95% of the initial luminance of 1000 cd m-2, LT95 > 430 h), and a high Commission Internationale de L'Éclairage y coordinate of 0.69. This indicates that managing the excitons through rational energy level alignment holds the potential for simultaneously satisfying Rec.2020 standard and achieving commercial-level stability.

Understanding of complex spin up-conversion processes in charge-transfer-type organic molecules

Despite significant progress made over the past decade in thermally activated delayed fluorescence (TADF) molecules as a material paradigm for enhancing the performance of organic light-emitting diodes, the underlying spin-flip mechanism in these charge-transfer (CT)-type molecular systems remains an enigma, even since its initial report in 2012. While the initial and final electronic states involved in spin-flip between the lowest singlet and lowest triplet excited states are well understood, the exact dynamic processes and the role of intermediate high-lying triplet (T) states are still not fully comprehended. In this context, we propose a comprehensive model to describe the spin-flip processes applicable for a typical CT-type molecule, revealing the origin of the high-lying T state in a partial molecular framework in CT-type molecules. This work provides experimental and theoretical insights into the understanding of intersystem crossing for CT-type molecules, facilitating more precise control over spin-flip rates and thus advancing toward developing the next-generation platform for purely organic luminescent candidates.

The Blue Problem: OLED Stability and Degradation Mechanisms

OLED technology has revolutionized the display industry and is promising for lighting. Despite its maturity, there remain outstanding device and materials challenges to address. Particularly, achieving stable and highly efficient blue OLEDs is still proving to be difficult; the vast array of degradation mechanisms at play, coupled with the precise balance of device parameters needed for blue high-performance OLEDs, creates a unique set of challenges in the quest for a suitably stable yet high-performance device. Here, we discuss recent progress in the understanding of device degradation pathways and provide an overview of possible strategies to increase device lifetimes without a significant efficiency trade-off. Only careful consideration of all variables that go into OLED development, from the choice of materials to a deep understanding of which degradation mechanisms need to be suppressed for the particular structure, can lead to a meaningful positive change toward commercializable blue devices.

Observation of aligned dipoles and angular chromism of exciplexes in organic molecular heterostructures

The dipole characteristics of Frenkel excitons and charge-transfer excitons between donor and acceptor molecules in organic heterostructures such as exciplexes are important in organic photonics and optoelectronics. For the bilayer of the organic donor 4,4',4''-tris[(3-methylphenyl)phenylamino]triphenylamine and acceptor 2,4,6-tris(biphenyl-3-yl)-1,3,5-triazine molecules, the exciplexes form aligned dipoles perpendicular to the Frenkel excitons, as observed in back focal plane photoluminescence images. The angular chromism of exciplexes observed in the 100 meV range indicates possible delocalization and angle-sensing photonic applications. The blue shift of the peak position and increase in the linewidth of photoluminescene spectra with increasing excitation power are caused by the repulsive aligned exciplex dipole moments with a long lifetime (4.65 μs). Electroluminescence spectra of the exciplex from organic light-emitting diodes using the bilayer are blue-shifted with increasing bias, suggesting unidirectional alignment of the exciplex dipole moments. The observation of exciplex dipole moment alignments across molecular interfaces can facilitate the controlled coupling of exciton species and increase efficiency of organic light-emitting diodes.

High-performance blue OLED using multiresonance thermally activated delayed fluorescence host materials containing silicon atoms

We report three highly efficient multiresonance thermally activated delayed fluorescence blue-emitter host materials that include 5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracene (DOBNA) and tetraphenylsilyl groups. The host materials doped with the conventional N7,N7,N13,N13,5,9,11,15-octaphenyl-5,9,11,15-tetrahydro-5,9,11,15-tetraaza-19b,20b-diboradinaphtho[3,2,1-de:1',2',3'-jk]pentacene-7,13-diamine (ν-DABNA) blue emitter exhibit a high photoluminescence quantum yield greater than 0.82, a high horizontal orientation greater than 88%, and a short photoluminescence decay time of 0.96-1.93 μs. Among devices fabricated using six synthesized compounds, the device with (4-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracen-7-yl)phenyl)triphenylsilane (TDBA-Si) shows high external quantum efficiency values of 36.2/35.0/31.3% at maximum luminance/500 cd m-2/1,000 cd m-2. This high performance is attributed to fast energy transfer from the host to the dopant. Other factors possibly contributing to the high performance are a T1 excited-state contribution, inhibition of aggregation by the bulky tetraphenylsilyl groups, high horizontal orientation, and high thermal stability. We achieve a high efficiency greater than 30% and a small roll-off value of 4.9% at 1,000 cd m-2 using the TDBA-Si host material.

Longevity gene responsible for robust blue organic materials employing thermally activated delayed fluorescence

The 3^rd-Gen OLED materials employing thermally-activated delayed fluorescence (TADF) combine advantages of first two for high-efficiency and low-cost devices. Though urgently needed, blue TADF emitters have not met stability requirement for applications. It is essential to elucidate the degradation mechanism and identify the tailored descriptor for material stability and device lifetime. Here, via in-material chemistry, we demonstrate chemical degradation of TADF materials involves critical role of bond cleavage at triplet state rather than singlet, and disclose the difference between bond dissociation energy of fragile bonds and first triplet state energy (BDE-E_T1) is linearly correlated with logarithm of reported device lifetime for various blue TADF emitters. This significant quantitative correlation strongly reveals the degradation mechanism of TADF materials have general characteristic in essence and BDE-E_T1 could be the shared "longevity gene". Our findings provide a critical molecular descriptor for high-throughput-virtual-screening and rational design to unlock the full potential of TADF materials and devices.

Forthcoming hyperfluorescence display technology: relevant factors to achieve high-performance stable organic light emitting diodes

Over the decade, there have been developments in purely organic thermally activated delayed fluorescent (TADF) materials for organic light-emitting diodes (OLEDs). However, achieving narrow full width at half maximum (FWHM) and high external quantum efficiency (EQE) is crucial for real display industries. To overcome these hurdles, hyperfluorescence (HF) technology was proposed for next-generation OLEDs. In this technology, the TADF material was considered a sensitizing host, the so-called TADF sensitized host (TSH), for use of triplet excitons via the reverse intersystem crossing (RISC) pathway. Since most of the TADF materials show bipolar characteristics, electrically generated singlet and triplet exciton energies can be transported to the final fluorescent emitter (FE) through Förster resonance energy transfer (FRET) rather than Dexter energy transfer (DET). This mechanism is possible from the S₁ state of the TSH to the S₁ state of the final fluorescent dopant (FD) as a long-range energy transfer. Considering this, some reports are available based on hyperfluorescence OLEDs, but the detailed analysis for highly efficient and stable devices for commercialization was unclear. So herein, we reviewed the relevant factors based on recent advancements to build a highly efficient and stable hyperfluorescence system. The factors include an energy transfer mechanism based on spectral overlapping, TSH requirements, electroluminescence study based on exciplex and polarity system, shielding effect, DET suppression, and FD orientation. Furthermore, the outlook and future positives with new directions were discussed to build high-performance OLEDs.

Toward highly efficient deep-blue OLEDs: Tailoring the multiresonance-induced TADF molecules for suppressed excimer formation and near-unity horizontal dipole ratio

Boron-based compounds exhibiting a multiresonance thermally activated delayed fluorescence are regarded promising as a narrowband blue emitter desired for efficient displays with wide color gamut. However, their planar nature makes them prone to concentration-induced excimer formation that broadens the emission spectrum, making it hard to increase the emitter concentration without raising CIE y coordinate. To overcome this bottleneck, we here propose o-Tol-ν-DABNA-Me, wherein sterically hindered peripheral phenyl groups are introduced to reduce intermolecular interactions, leading to excimer formation and thus making the pure narrowband emission character far less sensitive to concentration. With this approach, we demonstrate deep-blue OLEDs with y of 0.12 and full width at half maximum of 18 nm, with maximum external quantum efficiency (EQE) of ca. 33%. Adopting a hyperfluorescent architecture, the OLED performance is further enhanced to EQE of 35.4%, with mitigated efficiency roll-off, illustrating the immense potential of the proposed method for energy-efficient deep-blue OLEDs.

Rational Molecular Design Strategy for Host Materials in Thermally Activated Delayed Fluorescence-OLEDs Suitable for Solution Processing

Herein, a novel core molecule for V-shaped host molecules was synthesized, wherein two carbazoles were directly linked to cyclohexane. Cy-mCP and Cy-mCBP hosts were also successfully prepared for solution-processable thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). The Cy-mCP and Cy-mCBP molecules contained a cyclohexane linker directly linked to two small molecular hosts (mCP and mCBP), exhibiting twice the molecular weight while maintaining the basic properties of a single host molecule with improved film-forming ability and solubility in organic solvents. These host materials showed superior thermal stability and high glass transition temperatures compared to lower molecular weight hosts. Green TADF-OLEDs were prepared using the two host materials and 2,4,5,6-tetra(3,6-di-tert-butylcarbazol-9-yl)-1,3-dicyanobenzene (t4CzIPN) emitter, achieving device efficiencies similar to that of a low-molecular-weight host. However, after the incorporation of a V-shaped host, superior characteristics were observed in terms of the thermal stability and operational stability of the device. The synthesis of V-shaped molecules by directly linking two carbazoles to a cyclohexane linker is promising for the development of different hosts for solution-processable OLEDs.

Thermally activated delayed fluorescent small molecule sensitized fluorescent polymers with reduced concentration-quenching for efficient electroluminescence

Thermally activated delayed fluorescence (TADF) small molecule bis-[3-(9,9-dimethyl-9,10-dihydroacridine)-phenyl]-sulfone (m-ACSO2) was used as a universal host to sensitize three conventional fluorescent polymers for maximizing the electroluminescent performance. The excitons were utilized via inter-molecular energy transfer and the non-radiative decays were successfully refrained in the condensed states. Therefore, the significant enhancement of the electroluminescent efficiencies was demonstrated. For instance, after doping poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT) into m-ACSO2, the external quantum efficiency (EQE) was improved by a factor of 17.0 in the solution-processed organic light-emitting device (OLED), as compared with the device with neat F8BT. In terms of the other well-known fluorescent polymers, i.e., poly (para-phenylene vinylene) copolymer (Super Yellow, SY) and poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), their EQEs in the devices were respectively enhanced by 70% and 270%, compared with the reference devices based on the conventional host 1,3-di(9H-carbazol-9-yl) benzene (mCP). Besides the improved charge balance in the bipolar TADF host, these were partially ascribed to reduced fluorescence quenching in the mixed films.

Efficient pure blue hyperfluorescence devices utilizing quadrupolar donor-acceptor-donor type of thermally activated delayed fluorescence sensitizers

The hyperfluorescence (HF) system has drawn great attention in display technology. However, the energy loss mechanism by low reverse intersystem crossing rate (kRISC) and the Dexter energy transfer (DET) channel is still challenging. Here, we demonstrate that this can be mitigated by the quadrupolar donor-acceptor-donor (D-A-D) type of thermally activated delayed fluorescence (TADF) sensitizer materials, DBA-DmICz and DBA-DTMCz. Further, the HF device with DBA-DTMCz and ν-DABNA exhibited 43.9% of high maximum external quantum efficiency (EQEmax) with the Commission Internationale de l'Éclairage coordinates of (0.12, 0.16). The efficiency values recorded for the device are among the highest reported for HF devices. Such high efficiency is assisted by hindered DET process through i) high kRISC, and ii) shielded lowest unoccupied molecular orbital with the presence of two donors in D-A-D type of skeleton. Our current study provides an effective way of designing TADF sensitizer for future HF technology.

Toward highly efficient hyperfluorescence-based emitters through excited-states alignment using novel optimally tuned range-separated models

Hyperfluorescence has recently been introduced as a promising strategy to achieve organic light-emitting diodes (OLEDs) with high color purity and enhanced stability. In this approach, fluorescent emitters (FEs) with strong and narrow band fluorescence are integrated in thin films containing sensitizers exhibiting thermally activated delayed fluorescence (TADF). Toward highly efficient hyperfluorescence-based emitters, the excited-states ordering of the FEs should be well-aligned. Given some recent endeavors in this context, the related theoretical explorations are relatively limited and have proven to be challenging. In this work, alignments of the corresponding excited-states, crucial for both the fast Förster resonance energy transfer and suppression of the Dexter energy transfer from TADF sensitizers to FEs, have theoretically been investigated using optimally tuned range-separated hybrid functionals (OT-RSHs). We have proposed and validated several variants of the models including OT-RSHs, their coupled versions with the polarizable continuum model, OT-RSHs-PCM, as well as the screened versions accounting for the screening effects by the electron correlation through the scalar dielectric constant, OT-SRSHs, for a reliable description of the excited-states ordering in the FEs of the hyperfluorescence-based materials. Particular attention is paid to the influence of the underlying density functional approximations as well as the short- and long-range Hartree-Fock (HF) exchange contributions and the range-separation parameter. Considering a series of experimentally known hyperfluorescence-based emitters as working models, it is unveiled that any combination of the ingredients in the proposed models does not render the correct order of the excited-states of the FEs, but a particular compromise among the involved parameters is needed to more accurately account for the relevant excited-states alignment. Perusing the results of our developed methods, the best ones are found to be the generalized gradient approximation-based OT-RSHs-PCM with the correct asymptotic behavior and incorporating no (low) HF exchange contribution at the short-range regime. The proposed models show superior performances not only with respect to their standard counterparts with the default parameters but also as compared to other range-separated approximations. Accountability of the best-proposed model is also put into broader perspective, where it has been employed for the computational design of several molecules as promising FE candidates prone to be utilized in hyperfluorescence-based materials. Summing up, the proposed models in this study can be recommended for both the theoretical modeling and confirming the experimental observations in the field of hyperfluorescence-based OLEDs.

Enhanced lasing properties of BUBD-1 film with multifunctional buffer layers doped with silver nanoparticles

The organic semiconductor lasers (OSLs) have been seen as a promising light source for future applications. Achieving organic semiconductors with low amplified spontaneous emission (ASE) threshold is a key progress toward the electrically pumped OSLs. In this paper, the ASE properties of CBP: 2wt% BUBD-1 blend films were optimized using buffer layers containing silver nanoparticles (Ag NPs) with different ratios. Both photoluminescence intensity and ASE properties of blend films were optimized when the buffer layer with 25 vol% Ag NPs was introduced. The lowest ASE threshold is 0.47 µJ/Pulse (6.71 µJ/cm²), which reduces 67.6%, and the highest gain factor is 20.14 cm^-1, which enhances 47.8% compared with that without buffer layers. The enhancement of ASE properties of blend films was ascribed to the four functions of the Ag NPs doped buffer layers, including the low refractive index of PMMA and the triple localized surface plasmon resonance (LSPR) effects of Ag NPs in buffer layers. The results show that the buffer layer modified by metal nanoparticles has great application potential in improving the lasing performance of organic small molecules.

Identification of OLED Degradation Scenarios by Kinetic Monte Carlo Simulations of Lifetime Experiments

We show how three-dimensions kinetic Monte Carlo simulations can be used to carry out an operational lifetime study of thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) and to deduce the sensitivity to various degradation scenarios. The approach is demonstrated for an experimentally well-characterized efficient green-emitting device. The simulation workflow includes an equilibration phase, an equilibrated pristine state phase and a degradation phase. Acceleration of the simulations by extrapolation from simulations at large current densities makes the simulation time realistically feasible. Such a procedure is also often followed in experimental studies. Degradation is assumed to be triggered by exciton-polaron quenching and exciton-exciton annihilation processes. A comparison of the simulated and experimental time-dependence of the luminance decay provides the probability that a degradation-triggering event leads to the formation of a degraded molecule. For the TADF OLED that has been studied, this parameter is only weakly dependent on the assumed scenario, provided that the degraded molecules are assumed to form trap sites, and is found to be ∼(0.2−0.7)×10−9. The approach is expected to enable systematic in silico studies of the operational lifetime and its sensitivity to the material composition, layer structure, charge carrier balance, and the use of refined device principles such as hyperfluorescence.

Thermally activated delayed fluorescence materials as organic photosensitizers

Photosensitizer molecules play a crucial role in materials and life sciences. Efforts to improve their performance and reduce the associated costs are therefore vital for advancing environmentally friendly light-driven technologies. In this Feature Article, we describe the use of photosensitizers that make use of thermally activated delayed fluorescence (TADF), their benefits compared to conventional fluorescent and phosphorescent sensitizers, and the efforts of our group and others to develop emitters with application-tailored properties. The key feature is the diversity of accessible excited state pathways, which may be tuned by molecular and supramolecular approaches to suit a particular problem. This unique property has allowed TADF emitters to become competitive for applications including TADF-sensitized fluorescence in light emitting diodes and chemical sensing, organic long persistent luminescence, photodynamic therapy, and non-coherent photon upconversion.

Preparation of Patterned and Multilayer Thin Films for Organic Electronics via Oxygen-Tolerant SI-PET-RAFT

An oxygen-tolerant approach is described for preparing surface-tethered polymer films of organic semiconductors directly from electrode substrates using polymer brush photolithography. A photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) approach was used to prepare multiblock polymer architectures with the structures of multi-layer organic light-emitting diodes (OLEDs), including electron-transport, emissive, and hole-transport layers. The preparation of thermally activated delayed fluorescence (TADF) and thermally assisted fluorescence (TAF) trilayer OLED architectures are described. By using direct photomasking as well as a digital micromirror device, we also show that the surface-initiated (SI)-PET-RAFT approach allows for enhanced control over layer thickness, and spatial resolution in polymer brush patterning at low cost.

A methyl-shield strategy enables efficient blue thermally activated delayed fluorescence hosts for high-performance fluorescent OLEDs

Here, we report a novel methyl-shield strategy to design ideal TADF hosts for the improvement of the performance of TSF-OLEDs. The methyl group on the xanthone acceptor acts like a shield to protect the luminance center from close intermolecular hydrogen bonding with adjacent molecules, thus alleviating exciton quenching, and meanwhile the small size of the methyl group almost does not disturb the π-π stacking between acceptors, thus maintaining fast electron-transport pathways. dMeACRXTO having two methyl shields is exploited as the host to achieve a record-high EQE of 32.3%, which represents the first report of an EQE above 30% in TSF-OLEDs.

Are the rates of dexter transfer in TADF hyperfluorescence systems optically accessible?

Seemingly not, but for unexpected reasons. Combining the triplet harvesting properties of TADF materials with the fast emission rates and colour purity of fluorescent emitters is attractive for developing high performance OLEDs. In this "hyperfluorescence" approach, triplet excitons are converted to singlets on the TADF material and transferred to the fluorescent material by long range Förster energy transfer. The primary loss mechanism is assumed to be Dexter energy transfer from the TADF triplet to the non-emissive triplet of the fluorescent emitter. Here we use optical spectroscopy to investigate energy transfer in representative emissive layers. Despite observing kinetics that at first appear consistent with Dexter quenching of the TADF triplet state, transient absorption, photoluminescence quantum yields, and comparison to phosphor-sensitised "hyperphosphorescent" systems reveal that this is not the case. While Dexter quenching by the fluorescent emitter is likely still a key loss mechanism in devices, we demonstrate that - despite initial appearances - it is inoperative under optical excitation. These results reveal a deep limitation of optical spectroscopy in characterizing hyperfluorescent systems.

A New BODIPY Material for Pure Color and Long Lifetime Red Hyperfluorescence Organic Light-Emitting Diode

A red fluorescent material, 1,3,7,9-tetrakis(4-(tert-butyl)phenyl)-5,5-difluoro-10-(2-methoxyphenyl)-5H-4l4,5l4-dipyrrolo[1,2-c:2',1'-f][1,3,2]diazaborinine (4tBuMB), as an emitting dopant in a thermally activated delayed fluorescence (TADF) sensitized hyperfluorescence organic light-emitting diode (HFOLED) is reported. The 4tBuMB shows a high photoluminescence quantum yield (PLQY) of 99% with an emission maximum at 620 nm and a full width at half-maximum (fwhm) of 31 nm in solution. Further, it shows a deep lowest unoccupied molecular orbital (LUMO) of 3.83 eV. Thus, two TADF materials, 4CzIPN and 4CzTPN, as sensitizing hosts, are selected on the basis of a suitable LUMO level and spectrum overlap with 4tBuMB. The fabricated HFOLED device with 4CzTPN as a sensitizing host and 4tBuMB as an emitting dopant shows a maximum external quantum efficiency (EQE), an emission maximum, an fwhm, and CIE coordinates of 19.4%, 617 nm, 44 nm, and (0.64, 0.36), respectively. The electroluminance performances of the 4CzTPN sensitized device are higher than those of the 4CzIPN-based device, which is attributed to a higher Förster resonance energy transfer (FRET) rate and reduced intersystem crossing/reverse intersystem crossing (ISC/RISC) cycles of the former. Also, the 4CzTPN-based HF device shows a longer device lifetime (LT₉₀) of 954 h than the 4CzIPN-baed device (LT₉₀ of 57 h) at 3000 cd m^-2. The higher device stability is due to the higher bond dissociation energies (BDEs) of 4CzTPN and 4tBuMB than that of 4CzIPN.

Understanding and Controlling Intersystem Crossing in Molecules

This review article focuses on the understanding of intersystem crossing (ISC) in molecules. It addresses readers who are interested in the phenomenon of intercombination transitions between states of different electron spin multiplicities but are not familiar with relativistic quantum chemistry. Among the spin-dependent interaction terms that enable a crossover between states of different electron spin multiplicities, spin-orbit coupling (SOC) is by far the most important. If SOC is small or vanishes by symmetry, ISC can proceed by electronic spin-spin coupling (SSC) or hyperfine interaction (HFI). Although this review discusses SSC- and HFI-based ISC, the emphasis is on SOC-based ISC. In addition to laying the theoretical foundations for the understanding of ISC, the review elaborates on the qualitative rules for estimating transition probabilities. Research on the mechanisms of ISC has experienced a major revival in recent years owing to its importance in organic light-emitting diodes (OLEDs). Exemplified by challenging case studies, chemical substitution and solvent environment effects are discussed with the aim of helping the reader to understand and thereby get a handle on the factors that steer the efficiency of ISC.

Bright luminescent lithium and magnesium carbene complexes

We report on the convenient synthesis of a CNC pincer ligand composed of carbazole and two mesoionic carbenes, as well as the corresponding lithium- and magnesium complexes. Mono-deprotonation affords a rare "naked" amide anion. In contrast to the proligand and its mono-deprotonated form, tri-deprotonated s-block complexes show bright luminescence, and their photophysical properties were therefore investigated by absorption- and luminescence spectroscopy. They reveal a quantum yield of 16% in solution at ambient temperature. Detailed quantum-chemical calculations assist in rationalizing the emissive properties based on an Intra-Ligand-Charge-Transfer (ILCT) between the carbazolido- and mesoionic carbene ligands. (Earth-)alkali metals prevent the distortion of the ligand following excitation and, thus, by avoiding non-radiative deactivation support bright luminescence.

Triazolotriazine-based thermally activated delayed fluorescence materials for highly efficient fluorescent organic light-emitting diodes (TSF-OLEDs)

Thermally activated delayed fluorescence (TADF) sensitized fluorescent organic light-emitting diodes (TSF-OLEDs) have shown great potential for the realization of high efficiency with low efficiency roll-off and good color purity. However, the superior examples of TSF-OLEDs are still limited up to now. Herein, a trade-off strategy is presented for designing efficient TADF materials and achieving high-performance TSF-OLEDs via the construction of a new type of triazolotriazine (TAZTRZ) acceptor. The enhanced electron-withdrawing ability of TAZTRZ acceptor, fused by triazine (TRZ) and triazole (TAZ) together, enables TADF luminogens with small singlet-triplet energy gap (ΔE_ST) values. Meanwhile, the increased planarity from the TRZ-phenyl linkage (6:6 system) to the TAZ-phenyl linkage (5:6 system) can compensate the decrease of oscillator strength (f) while lowing ΔE_ST, thus achieving a trade-off between small ΔE_ST and high f. As a result, the related TSF-OLED achieved an extremely low turn-on voltage of 2.1 V, an outstanding maximum external quantum efficiency (EQE_max) of 23.7% with small efficiency roll-off (EQE₁₀₀₀ of 23.2%; EQE₅₀₀₀ of 20.6%) and an impressively high maximum power efficiency of 82.1 lm W^-1, which represents the state-of-the-art performance for yellow TSF-OLEDs.

Highly Efficient Near-Infrared Electrofluorescence from a Thermally Activated Delayed Fluorescence Molecule

Near-IR organic light-emitting diodes (NIR-OLEDs) are potential light-sources for various sensing applications as OLEDs have unique features such as ultra-flexibility and low-cost fabrication. However, the low external electroluminescence (EL) quantum efficiency (EQE) of NIR-OLEDs is a critical obstacle for potential applications. Here, we demonstrate a highly efficient NIR emitter with thermally activated delayed fluorescence (TADF) and its application to NIR-OLEDs. The NIR-TADF emitter, TPA-PZTCN, has a high photoluminescence quantum yield of over 40 % with a peak wavelength at 729 nm even in a highly doped co-deposited film. The EL peak wavelength of the NIR-OLED is 734 nm with an EQE of 13.4 %, unprecedented among rare-metal-free NIR-OLEDs in this spectral range. TPA-PZTCN can sensitize a deeper NIR fluorophore to achieve a peak wavelength of approximately 900 nm, resulting in an EQE of over 1 % in a TADF-sensitized NIR-OLED with high operational device durability (LT₉₅ >600 h.).

Enhanced Upconversion of Triplet Excitons for Conjugated Polymeric Thermally Activated Delayed Fluorescence Emitters by Employing an Intramolecular Sensitization Strategy

Endowed by a thermally activated delayed fluorescence (TADF) sensitizer with a high constant rate of reverse intersystem crossing, the singlet excitons could be accumulated and then delivered to emitting states through favorable Förster resonance energy transfer, bypassing the inefficient intersystem transition processes of emitters. However, the conventional intermolecular sensitization strategies suffer from inherent aggregation-induced quenching and inevitable phase segregation of TADF sensitizers and emitters. In this context, we proposed a novel intramolecular sensitization strategy by covalently incorporating the TADF sensitizer into conjugated polymeric emitters. After rationally regulating the proportions of sensitizer and emitter units in polymers, the intramolecular sensitized conjugated TADF polymers with anticipated photophysical properties and stable device performance were obtained. A superior k_RISC value over 10⁶ s^-1 accompanied by a suppressed nonradiative transition of the triplet exciton could be gained; therefore, the photoluminescence quantum yield (PLQY) could reach nearly 90%. In accord with the superior PLQY values enhanced by our intramolecular sensitization strategy, the solution-processed organic light-emitting diodes (OLEDs) can achieve a maximum external quantum efficiency (EQE) value of 17.8% while still maintaining 16.0% at 1000 cd/m² with extremely low efficiency roll-off. These results convincingly manifest the significance of an intramolecular sensitization strategy for designing high-efficiency polymeric TADF emitters.

Intersystem crossing processes in the 2CzPN emitter: a DFT/MRCI study including vibrational spin-orbit interactions

Multireference quantum chemical calculations were performed in order to investigate the (reverse) intersystem crossing ((R)ISC) mechanisms of 4,5-di(9H-carbazol-9-yl)-phthalonitrile (2CzPN). A combination of density funcional theory (DFT) and multireference configuration interaction methods (MRCI) was used. The excellent agreement of the computed absorption spectrum with available experimental absorption spectra lends confidence to the chosen computational protocol. Vertically, two triplet excited states (T₁ and T₂) are found below the S₁ state. At the excited state minima, the calculated adiabatic energies locate only the T₁ state below the S₁ state. The enhanced charge transfer (CT) character of the geometrically relaxed excited states causes their mutual (direct) spin-orbit coupling (SOC) interaction to be low. Contributions of vibronic SOC to the (R)ISC probability, evaluated by a Herzberg-Teller-like procedure for a temperature of 300 K, are small but not negligible. For ISC, the S₁→ T₁ channel is the fastest (8 × 10⁶ s^-1), while the S₁→ T₂ channel is found to be thermally activated (9 × 10⁴ s^-1) and less efficient when proceeding from the adiabatic S₁ state. Our calculations also reveal, however, a barrierless S₁→ T₂ ISC pathway near the Franck-Condon region. RISC is found to essentially proceed via the T₁→ S₁ channel, with a rate constant of (3 × 10⁴ s^-1) if our adiabatic singlet-triplet energy gap in vacuum (ΔE_ST = 0.12 eV) is employed. Shifting the potentials to match two experimentally reported singlet-triplet energy gaps in toluene (ΔE_ST = 0.21 and 0.31 eV, respectively) leads to a drastic reduction of the computed rate constant by up to 4 orders of magnitude. The T₂ state is not expected to play a major role in mediating triplet-singlet transitions in 2CzPN unless it is directly populated by hot excitons. No indication for a strong vibronic coupling of the T₂ and T₁ potentials is found, which could help overcome the negative exponential dependence of the RISC rate constant on the magnitude of the energy gap.

Isotope Effect in the Magneto-Optoelectronic Response of Organic Light-Emitting Diodes Based on Donor-Acceptor Exciplexes

The isotope effect is studied in the magneto-electroluminescence (MEL) and pulsed electrically detected magnetic resonance of organic light-emitting diodes based on thermally activated delayed fluorescence (TADF) from donor-acceptor exciplexes that are either protonated (H) or deuterated (D). It is found that at ambient temperature, the exchange of H to D has no effect on the spin-dependent current and MEL responses in the devices. However, at cryogenic temperatures, where the reverse intersystem crossing (RISC) from triplet to singlet exciplex diminishes, a pronounced isotope effect is observed. These results show that the RISC process is not governed by the hyperfine interaction as thought previously, but proceeds through spin-mixing in the triplet exciplex. The observations are corroborated by electrically detected transient spin nutation experiments that show relatively long dephasing time at ambient temperature, and interpreted in the context of a model that involves exchange and hyperfine interactions in the spin triplet exciplex. These findings deepen the understanding of the RISC process in TADF materials.

Precise Exciton Management of Quaternary Emission Layers for Highly Stable Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence

Simultaneous achievement of both high electroluminescence efficiency and high operational stability in organic light-emitting diodes (OLEDs) is required for their use in various practical applications. Although OLEDs based on thermally activated delayed fluorescence-assisted fluorescence (TAF) are considered to possess a promising device architecture to exploit the full potential of OLEDs, the operational stability of such systems still requires further improvement. In this study, a quaternary emission layer consisting of a combination of TAF and mixed-host systems is developed. OLEDs containing this emission layer show improved operational stability through the management of exciton generation processes while maintaining high electroluminescence efficiency. Furthermore, a gradient of the mixed ratio of the co-host matrix is used to optimize the recombination zone profile in the emission layer, leading to 17 times improvement of the operational lifetime compared with that of the corresponding single-host-based device. This research provides a simple and general method to develop highly stable TAF-OLEDs.

Improvement of viewing angle dependence of bottom-emitting green organic light-emitting diodes with a strong microcavity effect

The current efficiency and color purity of organic light-emitting diodes (OLEDs) can be easily improved by means of a microcavity structure, but this improvement is typically accompanied by a deterioration in the characteristics of viewing angle. To minimize the angular dependence of the color characteristics exhibited by these strong microcavity devices, we investigated the changes in the optical properties of the green OLED with a bottom resonant structure. This investigation was based on varying the hole transport layer and semitransparent anode thicknesses. The results of optical simulations revealed that the current efficiency and viewing angle characteristics can be simultaneously improved by adjusting the thickness of the two layers. Furthermore, optical simulations predicted that the angular color dependence could be limited to 0.019 in the International Commission on Illumination (CIE) 1976 coordinate system. This optimum condition yielded a current efficiency of ∼134 cd/A. To further reduce this color shift, a nanosized island array (NIA) was introduced through the dewetting process of cesium chloride. By employing NIAs, the color coordinate shift value was reduced to 0.016 in the CIE 1976 coordinate system, and a current efficiency of 130.7 cd/A was achieved.

A π-D and π-A Exciplex-Forming Host for High-Efficiency and Long-Lifetime Single-Emissive-Layer Fluorescent White Organic Light-Emitting Diodes

Exciplex-forming hosts with thermally activated delayed fluorescence (TADF) provide a viable opportunity to unlock the full potential of the yet-to-be improved power efficiencies (PEs) and stabilities of all-fluorescent white organic light-emitting diodes (WOLEDs), but this, however, is hindered by the lack of stable blue exciplexes. Here, an advanced exciplex system is proposed by incorporating bipolar charge-transport π-spacers into both the electron-donor (D) and the electron-accepter (A) to increase their distance for hypsochromic-shifted emission while maintaining the superior transporting ability. By using spirofluorene as the π-spacer, 3,3'-bicarbazole as the D-unit, and 2,4,6-triphenyl-1,3,5-triazine as the A-unit, a π-D and π-A exciplex with sky-blue emission and fast reverse intersystem crossing process is thereof constructed. Combining this exciplex-forming host, a blue TADF-sensitizer, and a yellow conventional fluorescent dopant in a single-emissive-layer, the fabricated warm-white-emissive device simultaneously exhibits a low driving voltage of 3.08 V, an external quantum efficiency of 21.4%, and a remarkable T80 (time to 80% of the initial luminance) of >8200 h at 1000 cd m^-2 , accompanied by a new benchmark PE of 69.6 lm W^-1 among all-fluorescent WOLEDs.

Thermally Assisted Fluorescent Polymers: Polycyclic Aromatic Materials for High Color Purity and White-Light Emission

Thermally activated delayed fluorescence (TADF) sensitization of fluorescence is a promising strategy to improve the color purity and operational lifetime of conventional TADF organic light-emitting diodes (OLEDs). Here, we propose a new design strategy for TADF-sensitized fluorescence based on acrylic polymers with a pendant energy-harvesting host, a TADF sensitizer, and fluorescent emitter monomers. Fluorescent emitters were rationally designed from a series of homologous polycyclic aromatic amines, resulting in efficient and color-pure polymeric fluorophores capable of harvesting both singlet and triplet excitons. Macromolecular analogues of blue, green, and yellow fourth-generation OLED emissive layers were prepared in a facile manner by Cu(0) reversible deactivation radical polymerization, with emission quantum yields up to 0.83 in air and narrow emission bands with full width at half-maximum as low as 57 nm. White-light emission can easily be achieved by enforcing incomplete energy transfer between a deep blue TADF sensitizer and yellow fluorophore to yield a single white-emissive polymer with CIE coordinates (0.33, 0.39) and quantum yield 0.77. Energy transfer to the fluorescent emitters occurs at rates of 1-4 × 10⁸ s^-1, significantly faster than deactivation caused by internal conversion or intersystem crossing. Rapid energy transfer facilitates high triplet exciton utilization and efficient sensitized emission, even when TADF emitters with a low quantum yield are used as photosensitizers. Our results indicate that a broad library of untapped polymers exhibiting efficient TADF-sensitized fluorescence should be readily accessible from known TADF materials, including many monomers previously thought unsuitable for use in OLEDs.

Aryl-substituted acridanes as hosts for TADF-based OLEDs

Four aryl-substituted acridan derivatives were designed, synthesized and characterized as electroactive materials for organic light emitting diodes based on emitters exhibiting thermally activated delayed fluorescence. These compounds possessed relatively high thermal stability with glass-transition temperatures being in the range of 79–97 °C. The compounds showed oxidation bands arising from acridanyl groups in the range of 0.31–038 V. Ionization potentials of the solid films ranged from 5.39 to 5.62 eV. The developed materials were characterized by triplet energies higher than 2.5 eV. The layer of 10-ethyl-9,9-dimethyl-2,7-di(naphthalen-1-yl)-9,10-dihydroacridine demonstrated hole mobilities reaching10⁻³ cm²/V·s at electric fields higher then ca. 2.5 × 10⁵ V/cm. The selected compounds were used as hosts in electroluminescent devices which demonstrated maximum external quantum efficiencies up to 3.2%.

Diboron-Based Delayed Fluorescent Emitters with Orange-to-Red Emission and Superior Organic Light-Emitting Diode Efficiency

For the application of organic light-emitting diodes (OLEDs) in lighting and panels, the basic requirement is to include a full spectrum color range. Compared with the development of blue and green luminophores in thermally activated delayed fluorescence (TADF) technology, the progress of orange-to-red materials is slow and needs further investigation. In this study, three diboron compound-based materials, dPhADBA, dmAcDBA, and SpAcDBA, were designed and synthesized by nucleophilic arylation of three amine donors on 9,10-diboraanthracene (DBA) in a two-step reaction. With increasing electron-donating ability, they show orange-to-red emission with TADF characteristics. The electroluminescence of these diboron compounds exhibits emissions λ_max at 613, 583, and 567 nm for dPhADBA, dmAcDBA, and SpAcDBA, respectively. It is noteworthy that the rod-like D-A-D structures can achieve high horizontal ratios (84-86%) and outstanding device performance for orange-to-red TADF OLEDs: the highest external quantum efficiencies for dPhADBA, dmAcDBA, and SpAcDBA are 11.1 ± 0.5, 24.9 ± 0.5, and 30.0 ± 0.8%, respectively. Therefore, these diboron-based molecules offer a promising avenue for the design of orange-to-red TADF emitters and the development of highly efficient orange-to-red OLEDs.

Conformation-dependent degradation of thermally activated delayed fluorescence materials bearing cycloamino donors

Organic light-emitting devices (OLEDs) containing organic molecules that exhibit thermally activated delayed fluorescence (TADF) produce high efficiencies. One challenge to the commercialization of the TADF OLEDs that remains to be addressed is their operational stability. Here we investigate the molecular factors that govern the stability of various archetypal TADF molecules based on a cycloamino donor-acceptor platform. Our results reveal that the intrinsic stability depends sensitively on the identity of the cycloamino donors in the TADF compounds. The rates and photochemical quantum yields of the degradation are positively correlated with the operation lifetimes of the devices. Our research shows that the stability is governed by the conformeric heterogeneity between the pseudo-axial and pseudo-equatorial forms of the cycloamino donor. Spontaneous bond dissociation occurs in the former (i.e., the pseudo-axial form), but the cleavage is disfavored in the pseudo-equatorial form. These findings provide valuable insights into the design of stable TADF molecules.

High energy acceptor states strongly enhance exciton transfer between metal organic phosphorescent dyes

Exciton management in organic light-emitting diodes (OLEDs) is vital for improving efficiency, reducing device aging, and creating new device architectures. In particular in white OLEDs, exothermic Förster-type exciton transfer, e.g. from blue to red emitters, plays a crucial role. It is known that a small exothermicity partially overcomes the spectral Stokes shift, enhancing the fraction of resonant donor-acceptor pair states and thus the Förster transfer rate. We demonstrate here a second enhancement mechanism, setting in when the exothermicity exceeds the Stokes shift: transfer to multiple higher-lying electronically excited states of the acceptor molecules. Using a recently developed computational method we evaluate the Förster transfer rate for 84 different donor–acceptor pairs of phosphorescent emitters. As a result of the enhancement the Förster radius tends to increase with increasing exothermicity, from around 1 nm to almost 4 nm. The enhancement becomes particularly strong when the excited states have a large spin-singlet character.

Exciton management in phosphorescent organic light-emitting diodes is critical to the optimal design and performance of these devices. Here, the authors report a computational method to elucidate the enhancement in exothermic exciton transfer between different phosphorescent emitters.