Reflection contributions to the dispersion artefact in FTIR spectra of single biological cells

μ-FTIR Reflectance Spectroscopy Coupled with Multivariate Analysis: A Rapid and Robust Method for Identifying the Extent of Photodegradation on Microplastics

Understanding the origins of microplastics (MPs) and evaluating the consequences of plastic pollution require precise chemical information. Moreover, MPs undergo chemical changes due to photoaging, which are worth investigating since they can influence the effects of MPs on living beings and the environment. Micro-Fourier-transform infrared (μ-FTIR) spectroscopy is a key technique for screening MPs, combining optical imaging with chemical information from IR spectra. While reflectance μ-FTIR spectroscopy's sensitivity to particle thickness and photodegradation complicates automated spectral matching, it can provide valuable information if coupled with multivariate analysis of the data. This study developed a robust method for identifying MPs, even when they are modified by photodegradation. Various acquisition methods (ATR-IR and μ-transflectance-IR), data pretreatments, and data set analysis procedures were examined, and critical aspects were addressed. The proposed method, using μ-TR-IR and principal component analysis (PCA), proved effective for classifying MPs and analyzing their degradation, offering increased sensitivity and a faster workflow compared with manual spectral comparison. μ-TR-IR showed earlier changes in relevant bands, indicating higher sensitivity to degradation than ATR-IR spectroscopy. Despite the notorious issue of spectral artifacts, our results suggest that valuable information can be collected without using sophisticated preprocessing techniques. On the contrary, the presence of the artifacts allows extracting some information on the particles' thickness. Finally, PCA results were successfully validated for the polymer classification reliability by a test set and compared with the carboxyl index (CI) method to validate the ability to assess degradation. While CI is the most diffused parameter to assess polymer degradation, PCA, which considers the entire spectrum and does not rely on manual integration of single peaks, is inherently more robust than CI and can take into account multiple degradation mechanisms.

Inverted Transflection Spectroscopy of Live Cells Using Metallic Grating on Elevated Nanopillars

Water absorption of mid-infrared (MIR) radiation severely limits the options for vibrational spectroscopy of the analytes-including live biological cells-that must be probed in aqueous environments. While internal reflection elements, such as attenuated total reflection prisms and metasurfaces, partially overcome this limitation, such devices have their own limitations: ATR prisms are difficult to integrate with multiwell cell culture workflows, while metasurfaces suffer from a limited spectral range and small penetration depth into analytes. In this work, we introduce an alternative live cell biosensing platform based on metallic nanogratings fabricated on top of elevated dielectric pillars. For the MIR wavelengths that are significantly longer than the grating period, reflection-based spectroscopy enables broadband sensing of the analytes inside the trenches separating the dielectric pillars. Because the depth of the analyte twice-traversed by the MIR light excludes the highly absorbing thick water layer above the grating, we refer to the technique as inverted transflection spectroscopy (ITS). The analytic power of ITS is established by measuring a wide range of protein concentrations in solution, with the limit of detection in the single-digit mg mL-1. The ability of ITS to interrogate live cells that naturally wrap themselves around the grating is used to characterize their adhesion kinetic.

Inverted transflection spectroscopy of live cells using metallic grating on elevated nanopillars

Water absorption of mid-infrared (MIR) radiation severely limits the options for vibrational spectroscopy of the analytes - including live biological cells - that must be probed in aqueous environments. While internal reflection elements, such as attenuated total reflection prisms and metasurfaces, partially overcome this limitation, such devices have their own limitations: high cost, incompatibility with standard cell culture workflows, limited spectral range, and small penetration depth into the analyte. In this work, we introduce an alternative live cell biosensing platform based on metallic nanogratings fabricated atop elevated dielectric pillars. For the MIR wavelengths that are significantly longer than the grating period, reflection-based spectroscopy enables broadband sensing of the analytes inside the trenches separating the dielectric pillars. Because the depth of the analyte twice-traversed by the MIR light excludes the highly absorbing thick water layer above the grating, we refer to the technique as Inverted Transflection Spectroscopy (ITS). We demonstrate the analytic power of ITS by measuring protein concentrations in solution. The ability of ITS to interrogate live cells that naturally wrap themselves around the grating is also exploited to characterize their adhesion kinetics.

Influence of measurement mode on the results of glioblastoma multiforme analysis with the FTIR microspectroscopy

Fourier Transform Infrared (FTIR) microspectroscopy is well known for its effectiveness in spectral and biochemical analyses of various materials. It enables to determine the sample biochemical composition by assigning detected frequencies, characteristic for functional groups of main biological macromolecules. In analysis of tissue sections one of two measurement modes, namely transmission and transflection, is usually applied. The first one has relatively straightforward geometry, hence it is considered to be more precise and accurate. However, IR-transparent media are very fragile and expensive. Transflection does not require expensive substrates, but is more prone to disruptive influence of Mie scattering as well as electric field standing wave effect. The excessive comparison of spectra' characteristics, obtained via both measurement modes, was performed in this paper. By the means of Mann-Whitney non-parametrical U test and PCA, the comparison of results obtained with both modes and assessment of usefulness of IR spectra obtained with transmission and transflection modes to differentiate between healthy and GBM-affected tissue, were performed. The main objective of the presented research is to compare the results of FTIR analysis of unfixed biological samples performed with transflection and transmission mode. In frame of the study we demonstrated the discrepancies between results of biochemical analysis performed based on data obtained with transmission and transflection. Such observation suggests that caution should be taken in drawing conclusions from the results obtained with transflection geometry, as its more prone to disruptive effects. Despite that, IR spectra developed with both modes allowed to distinguish GBM area from healthy tissue, which proves their diagnostic potential. Especially, application of the ME-EMSC correction of spectra before PCA enhances the performance of both methods to distinguish the analysed tissue areas.

Contributions of vibrational spectroscopy to virology: A review

Vibrational spectroscopic techniques, both infrared absorption and Raman scattering, are high precision, label free analytical techniques which have found applications in fields as diverse as analytical chemistry, pharmacology, forensics and archeometrics and, in recent times, have attracted increasing attention for biomedical applications. As analytical techniques, they have been applied to the characterisation of viruses as early as the 1970 s, and, in the context of the coronavirus disease 2019 (COVID-19) pandemic, have been explored in response to the World Health Organisation as novel methodologies to aid in the global efforts to implement and improve rapid screening of viral infection. This review considers the history of the application of vibrational spectroscopic techniques to the characterisation of the morphology and chemical compositions of viruses, their attachment to, uptake by and replication in cells, and their potential for the detection of viruses in population screening, and in infection response monitoring applications. Particular consideration is devoted to recent efforts in the detection of severe acute respiratory syndrome coronavirus 2, and monitoring COVID-19.

An automated approach for fringe frequency estimation and removal in infrared spectroscopy and hyperspectral imaging of biological samples

In infrared spectroscopy of thin film samples, interference introduces distortions in spectra, commonly referred to as fringes. Fringes may alter absorbance peak ratios, which hampers the spectral analysis. We have previously introduced extended multiplicative signal correction (EMSC) for fringes correction. In the current article, we provide a robust open-source algorithm for fringe correction in infrared spectroscopy and propose several improvements to the Fringe EMSC model. The suggested algorithm achieves a more precise fringe frequency estimation by mean centering of the measured spectrum and applying a window function prior to the Fourier transform. It selects two frequencies from a user defined number of maxima in the Fourier domain. The improved Fringe EMSC algorithm is validated on two experimental datasets, one of them being a hyperspectral image. Techniques for separating sample spectra from background spectra in hyperspectral images, and techniques to identify spectra affected by fringes are also provided.

"Wax On, Wax Off": In Vivo Imaging of Plant Physiology and Disease with Fourier Transform Infrared Reflectance Microspectroscopy

Analysis of the epicuticular wax layer on the surface of plant leaves can provide a unique window into plant physiology and responses to environmental stimuli. Well-established analytical methodologies can quantify epicuticular wax composition, yet few methods are capable of imaging wax distribution in situ or in vivo. Here, the first report of Fourier transform infrared (FTIR) reflectance spectroscopic imaging as a non-destructive, in situ, method to investigate variation in epicuticular wax distribution at 25 µm spatial resolution is presented. The authors demonstrate in vivo imaging of alterations in epicuticular waxes during leaf development and in situ imaging during plant disease or exposure to environmental stressors. It is envisaged that this new analytical capability will enable in vivo studies of plants to provide insights into how the physiology of plants and crops respond to environmental stresses such as disease, soil contamination, drought, soil acidity, and climate change.

Influence of interference effects on the spectral quality and histological classification by FT-IR imaging in transflection geometry

Infrared (IR) imaging can be used for fast, accurate and non-destructive pathology recognition of biopsies when supported by machine learning algorithms. Transflection mode of measurements has the potential to be translated into the clinic due to economic reasons of large-scale imaging with the need for inexpensive substrates. Unfortunately, in this mode spectral distortions originating from light interference appear. Due to this fact transmission measurement mode is more frequently used in pathology recognition. Nevertheless, this measurement mode also is not devoid of spectral distortion effects like scattering. However, this effect is better understood and there are preprocessing algorithms to minimize it. In this work, we investigated the influence of interference effects on spectral quality of pancreatic tissues measured in transmission and transflection mode with Fourier tranform IR (FT-IR) microscopy using samples embedded with and without paraffin. The removal of paraffin leads to an altered magnitude of interference in transflection and provides a platform for a detailed analysis of its effect on the spectra of biological material, since the same sample is measured with different interference conditions. Moreover, the potential of transflection mode measurements in histological classification of analyzed samples was investigated and compared with classification results for transmission mode.

Discrimination of grass pollen of different species by FTIR spectroscopy of individual pollen grains

Fourier-transform infrared (FTIR) spectroscopy enables the chemical characterization and identification of pollen samples, leading to a wide range of applications, such as paleoecology and allergology. This is of particular interest in the identification of grass (Poaceae) species since they have pollen grains of very similar morphology. Unfortunately, the correct identification of FTIR microspectroscopy spectra of single pollen grains is hindered by strong spectral contributions from Mie scattering. Embedding of pollen samples in paraffin helps to retrieve infrared spectra without scattering artifacts. In this study, pollen samples from 10 different populations of five grass species (Anthoxanthum odoratum, Bromus inermis, Hordeum bulbosum, Lolium perenne, and Poa alpina) were embedded in paraffin, and their single grain spectra were obtained by FTIR microspectroscopy. Spectra were subjected to different preprocessing in order to suppress paraffin influence on spectral classification. It is shown that decomposition by non-negative matrix factorization (NMF) and extended multiplicative signal correction (EMSC) that utilizes a paraffin constituent spectrum, respectively, leads to good success rates for the classification of spectra with respect to species by a partial least square discriminant analysis (PLS-DA) model in full cross-validation for several species. PLS-DA, artificial neural network, and random forest classifiers were applied on the EMSC-corrected spectra using an independent validation to assign spectra from unknown populations to the species. Variation within and between species, together with the differences in classification results, is in agreement with the systematics within the Poaceae family. The results illustrate the great potential of FTIR microspectroscopy for automated classification and identification of grass pollen, possibly together with other, complementary methods for single pollen chemical characterization.

Biomolecular and bioanalytical applications of infrared spectroscopy - A review

Infrared (IR; or mid-infrared, MIR; 4000-400 cm^-1; 2500-25,000 nm) spectroscopy has become one of the most powerful and versatile tools at the disposal of modern bioscience. Because of its high molecular specificity, applicability to wide variety of samples, rapid measurement and non-invasivity, IR spectroscopy forms a potent approach to elucidate qualitative and quantitative information from various kinds of biological material. For these reasons, it became an established bioanalytical technique with diverse applications. This work aims to be a comprehensive and critical review of the recent accomplishments in the field of biomolecular and bioanalytical IR spectroscopy. That progress is presented on a wider background, with fundamental characteristics, the basic principles of the technique outlined, and its scientific capability directly compared with other methods being used in similar fields (e.g. near-infrared, Raman, fluorescence). The article aims to present a complete examination of the topic, as it touches the background phenomena, instrumentation, spectra processing and data analytical methods, spectra interpretation and related information. To suit this goal, the article includes a tutorial information essential to obtain a thorough perspective of bio-related applications of the reviewed methodologies. The importance of the fundamental factors to the final performance and applicability of IR spectroscopy in various areas of bioscience is explained. This information is interpreted in critical way, with aim to gain deep understanding why IR spectroscopy finds extraordinarily intensive use in this remarkably diverse and dynamic field of research and utility. The major focus is placed on the diversity of the applications in which IR biospectroscopy has been established so far and those onto which it is expanding nowadays. This includes qualitative and quantitative analytical spectroscopy, spectral imaging, medical diagnosis, monitoring of biophysical processes, and studies of physicochemical properties and dynamics of biomolecules. The application potential of IR spectroscopy in light of the current accomplishments and the future prospects is critically evaluated and its significance in the progress of bioscience is comprehensively presented.

Model-based correction algorithm for Fourier Transform infrared microscopy measurements of complex tissue-substrate systems

Model-based algorithms have recently attracted much attention for data pre-processing in tissue mapping and imaging by Fourier transform infrared micro-spectroscopy (FTIR). Their versatility, robustness and computational performance enabled the improvement of spectral quality by mitigating the impact of scattering and fringing in FTIR spectra of chemically homogeneous biological systems. However, to date, no comprehensive algorithm has been optimized and automated for large-area FTIR imaging of histologically complex tissue samples. Herein, for the first time, we propose a unique, integrated and fully-automated Multiple Linear Regression Multi-Reference (MLR-MR) method for correcting linear baseline effects due to diffuse scattering, for compensating substrate thickness inhomogeneity and accounting for sample chemical heterogeneity in FTIR images. In particular, the algorithm uses multiple-reference spectra for histologically heterogeneous biological samples. The performance of the procedure was demonstrated for FTIR imaging of chemically complex rat brain frontal cortex tissue samples, mounted onto Ultralene® films. The proposed MLR-MR correction algorithm allows the efficient retrieval of "pure" absorbance spectra and greatly improves the histological fidelity of FTIR imaging data, as compared with the one-reference approach. In addition, the MLR-MR algorithm here presented opens up the possibility for extracting information on substrate thickness variability, thus enabling the indirect evaluation of its topography. As a whole, the MLR-MR procedure can be easily extended to more complex systems for which Mie scattering effects must also be eliminated.

Noise-free simulation of an FT-IR imaging hyperspectral dataset of pancreatic biopsy core bound by experiment

A noise-free hyperspectral FT-IR imaging dataset of a pancreatic tissue core was simulated based on experimental data that allows to test the performance of various data analysis and processing algorithms. A set of experimental noise levels was also added and used for denoising approaches comparison, which due to the noise-free reference signal enables to truly observe signal distortion caused by different approaches.

Fourier transform infrared spectroscopic imaging of colon tissues: evaluating the significance of amide I and C-H stretching bands in diagnostic applications with machine learning

Fourier transform infrared (FTIR) spectroscopic imaging of colon biopsy tissues in transmission combined with machine learning for the classification of different stages of colon malignancy was carried out in this study. Two different approaches, an optical and a computational one, were applied for the elimination of the scattering background during the measurements and compared with the results of the machine learning model without correction for the scattering. Several different data processing pathways were implemented in order to obtain a high accuracy of the prediction model. This study demonstrates, for the first time, that C-H stretching and amide I bands are of little to no significance in the classification of the colon malignancy, based on the Gini importance values by random forest (RF). The best prediction outcome is found when supervised RF classification was carried out in the fingerprint region of the spectral data between 1500 and 1000 cm^-1 (excluding the contribution of amide I and II bands). An overall prediction accuracy higher than 90% is achieved through the RF. The results also show that dysplastic and hyperplastic tissues are well distinguished. This leads to the insight that the important differences between hyperplastic and dysplastic colon tissues lie within the fingerprint region of FTIR spectra. In this study, computational correction performed better than optical correction, but the findings show that the disease states of colon biopsies can be distinguished effectively without elimination of Mie scattering effect. Graphical abstract.

Application of metasurface-enhanced infra-red spectroscopy to distinguish between normal and cancerous cell types

Fourier transform infrared (FTIR) spectra of biological cells can reveal clinically important information about cells' composition, including their normal or cancerous status. The recently emerged diagnostic technique of spectral cytopathology (SCP) combines FTIR with multivariate statistical analysis to detect cell abnormalities, differentiate between cell types, and monitor disease progression. We demonstrate a new variant of SCP, a metasurface-enhanced infrared reflection spectroscopic cytopathology (MEIRSC) that utilises judiciously designed plasmonic metasurfaces to localize and enhance the evanescent field near the cell's membrane, and to carry out spectroscopic interrogations of the cells attached to the metasurface using reflected infrared light. Our findings indicate that the MEIRSC approach enables us to differentiate between normal and cancerous human colon cells. The sensitivity of MEIRSC is such that a very small (about 50 nm deep) portion of the cell can yield valuable diagnostic information.

Current and future functional imaging techniques for post-traumatic stress disorder

Posttraumatic stress disorder (PTSD) is a trauma and stressor related psychiatric disorder associated with structural, metabolic, and molecular alternations in several brain regions including diverse cortical areas, neuroendocrine regions, the striatum, dopaminergic, adrenergic and serotonergic pathways, and the limbic system. We are in critical need of novel therapeutics and biomarkers for PTSD and a deep understanding of cutting edge imaging and spectroscopy methods is necessary for the development of promising new approaches to better diagnose and treat the disorder. According to the Diagnostic and Statistical Manual of Mental Disorders (DSM-V) criterion, all forms of traumatic stress-induced disorder are considered acute stress disorder for the first month following the stressor. Only after symptoms do not remit for one month can the disorder be deemed PTSD. It would be particularly useful to differentiate between acute stress disorder and PTSD during the one month waiting period so that more intensive treatments can be applied early on to patients with a high likelihood of developing PTSD. This would potentially enhance treatment outcomes and/or prevent the development of PTSD. Comprehension of the qualities and limitations of currently applied methods as well as the novel emerging techniques provide invaluable knowledge for fast paced development. Conventional methods of studying PTSD have proven to be insufficient for diagnosis, measurement of treatment efficacy, and monitoring disease progression. As the field currently stands, there is no diagnostic biomarker available for any psychiatric disease, PTSD included. Currently, emerging and available technologies are not utilized to their full capacity and in appropriate experimental designs for the most fruitful possible studies in this area. Therefore, there is an apparent need for improved methods in PTSD research. This review demonstrates the current state of the literature in PTSD, including molecular, cellular, and behavioral indicators, possible biomarkers and clinical and pre-clinical imaging techniques relevant to PTSD, and through this, elucidate the void of current practical imaging and spectroscopy methods that provide true biomarkers for the disorder and the significance of devising new techniques for future investigations. We are unlikely to develop a single biomarker for any psychiatric disorder however. As psychiatric disorders are incomparably complex compared to other medical diagnoses, its most likely that transcriptomic, metabolomic and structural and connectomic imaging data will have to be analyzed in concert in order to produce a dependable non-behavioral marker of PTSD. This can explain the necessity of bridging conventional approaches to novel technologies in order to create a framework for further discoveries in the treatment of PTSD.

Conventional methods of studying posttraumatic stress disorder (PTSD) have proven to be insufficient for diagnosis. We have reviewed clinical and preclinical imaging techniques as well as molecular, cellular, and behavioral indicators for PTSD.

Synchrotron macro ATR-FTIR microspectroscopy for high-resolution chemical mapping of single cells

Coupling synchrotron IR beam to an ATR element enhances spatial resolution suited for high-resolution single cell analysis in biology, medicine and environmental science.

Infrared micro-spectroscopy of human tissue: principles and future promises

This article summarizes the methods employed, and the progress achieved over the past two decades in applying vibrational (Raman and IR) micro-spectroscopy to problems of medical diagnostics and cellular biology. During this time, several research groups have verified the enormous information contained in vibrational spectra; in fact, information on protein, lipid and metabolic composition of cells and tissues can be deduced by decoding the observed vibrational spectra. This decoding process is aided by the availability of computer workstations and advanced algorithms for data analysis. Furthermore, commercial instrumentation for the fast collection of both Raman and infrared micro-spectral data has enabled the collection of images of cells and tissues based solely on vibrational spectroscopic data. The progress in the field has been manifested by a steady increase in the number and quality of publications submitted by established and new research groups in vibrational spectroscopy in the biological and biomedical arenas.

Clinical applications of infrared and Raman spectroscopy: state of play and future challenges

This review examines the state-of-the-art of clinical applications of infrared absorption and Raman spectroscopy, outstanding challenges, and progress towards translation.

Removing interference-based effects from the infrared transflectance spectra of thin films on metallic substrates: a fast and wave optics conform solution

We provide a formalism that is able to correct electric field standing wave “artifacts” in infrared transflection spectra.

Quantitative Chemical Analysis at the Nanoscale Using the Photothermal Induced Resonance Technique

Photothermal induced resonance (PTIR), also known as AFM-IR, is a scanning probe technique that provides sample composition information with a lateral resolution down to 20 nm. Interest in PTIR stems from its ability to identify unknown samples at the nanoscale thanks, in first approximation, to the direct comparability of PTIR spectra with far-field infrared databases. The development of rapidly tuning quantum cascade lasers has increased the PTIR throughput considerably, making nanoscale hyperspectral imaging within a reasonable time frame possible. Consequently, a better understanding of PTIR signal generation and of the fine details of PTIR analysis has become of paramount importance for extending complex IR analysis methods developed in the far-field, e.g., for classification and hyperspectral imaging, to nanoscale PTIR spectra. Here we calculate PTIR spectra via thin-film optics, to identify subtle changes (band shifts, deviation from linear approximation, etc.) for common sample parameters in the case of PTIR with total internal reflection illumination. Results show signal intensity linearity and small band shifts as long as the sample is prepared correctly, with band shifts typically smaller than macroscale attenuated total reflection (ATR) spectroscopy. Finally, a generally applicable algorithm to retrieve the pure imaginary component of the refractive index (i.e., the chemically specific information) is provided to overcome the PTIR spectra nonlinearity.

Spatial and molecular resolution of diffuse malignant mesothelioma heterogeneity by integrating label-free FTIR imaging, laser capture microdissection and proteomics

Diffuse malignant mesothelioma (DMM) is a heterogeneous malignant neoplasia manifesting with three subtypes: epithelioid, sarcomatoid and biphasic. DMM exhibit a high degree of spatial heterogeneity that complicates a thorough understanding of the underlying different molecular processes in each subtype. We present a novel approach to spatially resolve the heterogeneity of a tumour in a label-free manner by integrating FTIR imaging and laser capture microdissection (LCM). Subsequent proteome analysis of the dissected homogenous samples provides in addition molecular resolution. FTIR imaging resolves tumour subtypes within tissue thin-sections in an automated and label-free manner with accuracy of about 85% for DMM subtypes. Even in highly heterogeneous tissue structures, our label-free approach can identify small regions of interest, which can be dissected as homogeneous samples using LCM. Subsequent proteome analysis provides a location specific molecular characterization. Applied to DMM subtypes, we identify 142 differentially expressed proteins, including five protein biomarkers commonly used in DMM immunohistochemistry panels. Thus, FTIR imaging resolves not only morphological alteration within tissue but it resolves even alterations at the level of single proteins in tumour subtypes. Our fully automated workflow FTIR-guided LCM opens new avenues collecting homogeneous samples for precise and predictive biomarkers from omics studies.

FTIR imaging of the molecular burden around Aβ deposits in an early-stage 3-Tg-APP-PSP1-TAU mouse model of Alzheimer's disease

High spatial resolution FTIR imaging of early-stage 3-Tg-APP-PSP1-TAU mouse brain identifies molecular burden around Aβ deposits.

Fundamental developments in infrared spectroscopic imaging for biomedical applications

Infrared chemical imaging is a rapidly emerging field with new advances in instrumentation, data acquisition and data analysis. These developments have had significant impact in biomedical applications and numerous studies have now shown that this technology offers great promise for the improved diagnosis of the diseased state. Relying on purely biochemical signatures rather than contrast from exogenous dyes and stains, infrared chemical imaging has the potential to revolutionise histopathology for improved disease diagnosis. In this review we discuss the recent advances in infrared spectroscopic imaging specifically related to spectral histopathology (SHP) and consider the current state of the field. Finally we consider the practical application of SHP for disease diagnosis and consider potential barriers to clinical translation highlighting current directions and the future outlook.

Spectral pre and post processing for infrared and Raman spectroscopy of biological tissues and cells

This review presents the current understanding of the factors influencing the quality of spectra recorded and the pre-processing steps commonly employed to improve on spectral quality, as well as some of the most common techniques for classification and analysis of the spectral data for biomedical applications.

Mechanisms of murine cerebral malaria: Multimodal imaging of altered cerebral metabolism and protein oxidation at hemorrhage sites

Using a multimodal biospectroscopic approach, we settle several long-standing controversies over the molecular mechanisms that lead to brain damage in cerebral malaria, which is a major health concern in developing countries because of high levels of mortality and permanent brain damage. Our results provide the first conclusive evidence that important components of the pathology of cerebral malaria include peroxidative stress and protein oxidation within cerebellar gray matter, which are colocalized with elevated nonheme iron at the site of microhemorrhage. Such information could not be obtained previously from routine imaging methods, such as electron microscopy, fluorescence, and optical microscopy in combination with immunocytochemistry, or from bulk assays, where the level of spatial information is restricted to the minimum size of tissue that can be dissected. We describe the novel combination of chemical probe-free, multimodal imaging to quantify molecular markers of disturbed energy metabolism and peroxidative stress, which were used to provide new insights into understanding the pathogenesis of cerebral malaria. In addition to these mechanistic insights, the approach described acts as a template for the future use of multimodal biospectroscopy for understanding the molecular processes involved in a range of clinically important acute and chronic (neurodegenerative) brain diseases to improve treatment strategies.

Diagnosing malaria infected cells at the single cell level using focal plane array Fourier transform infrared imaging spectroscopy

New methods are needed to rapidly identify malaria parasites in blood smears. The coupling of a Focal Plane Array (FPA) infrared microscope system to a synchrotron light source at IRENI enables rapid molecular imaging at high spatial resolution. The technique, in combination with hyper-spectral processing, enables imaging and diagnosis of early stage malaria parasites at the single cell level in a blood smear. The method relies on the detection of distinct lipid signatures associated with the different stages of the malaria parasite and utilises resonant Mie extended multiplicative scatter correction to pre-process the spectra followed by full bandwidth image deconvolution to resolve the single cells. This work demonstrates the potential of focal plane technology to diagnose single cells in a blood smear. Brighter laboratory based infrared sources, optical refinements and higher sensitive detectors will soon see the emergence of focal plane array imaging in the clinical environment.

Detection of highly energetic materials on non-reflective substrates using quantum cascade laser spectroscopy

A quantum cascade laser spectrometer was used to obtain the reflection spectra of highly energetic materials (HEMs) deposited on nonideal, low-reflectivity substrates, such as travel-bag fabric (polyester), cardboard, and wood. Various deposition methods were used to prepare the standards and samples in the study. The HEMs used were the nitroaromatic explosive 2,4,6-trinitrotoluene (TNT), the aliphatic nitrate ester pentaerythritol tetranitrate (PETN), and the aliphatic nitramine 1,3,5-trinitroperhydro-1,3,5-triazine (RDX). Chemometrics algorithms were applied to analyze the recorded spectra. Partial least squares (PLS) regression analysis was used to find the best correlation between the infrared signals and the surface concentrations of the samples, and PLS combined with discriminant analysis (PLS-DA) was used to discriminate, classify, and identity similarities in the spectral datasets. Several preprocessing steps were applied to prepare the mid-infrared spectra of HEMs deposited on the target substrates. The results demonstrate that the infrared vibrational method described in this study is well suited for the rapid screening analysis of HEMs on low-reflectivity substrates when a supervised model has been previously constructed or when a reference spectrum of the clean substrate can be acquired to be subtracted from the HEM-substrate spectrum.

High-definition Fourier Transform Infrared (FT-IR) spectroscopic imaging of human tissue sections towards improving pathology

High-definition Fourier Transform Infrared (FT-IR) spectroscopic imaging is an emerging approach to obtain detailed images that have associated biochemical information. FT-IR imaging of tissue is based on the principle that different regions of the mid-infrared are absorbed by different chemical bonds (e.g., C=O, C-H, N-H) within cells or tissue that can then be related to the presence and composition of biomolecules (e.g., lipids, DNA, glycogen, protein, collagen). In an FT-IR image, every pixel within the image comprises an entire Infrared (IR) spectrum that can give information on the biochemical status of the cells that can then be exploited for cell-type or disease-type classification. In this paper, we show: how to obtain IR images from human tissues using an FT-IR system, how to modify existing instrumentation to allow for high-definition imaging capabilities, and how to visualize FT-IR images. We then present some applications of FT-IR for pathology using the liver and kidney as examples. FT-IR imaging holds exciting applications in providing a novel route to obtain biochemical information from cells and tissue in an entirely label-free non-perturbing route towards giving new insight into biomolecular changes as part of disease processes. Additionally, this biochemical information can potentially allow for objective and automated analysis of certain aspects of disease diagnosis.

Spectropathology for the next generation: Quo vadis?

Vibrational spectroscopy for biomedical applications has shown great promise although its translation into clinical practice has, as yet, been relatively slow. This Editorial assesses the challenges facing the field and the potential way forward.

Comparison of transflection and transmission FTIR imaging measurements performed on differentially fixed tissue sections

FTIR microscopy of adjacent sections of tissue measured by transmission and transflection shows comparable images after UHCA.

Rapid and sensitive screening of 17β-estradiol estrogenicity using Fourier transform infrared imaging spectroscopy (FT-IRIS)

It is important to develop rapid and sensitive screening assays to assess the biological effects of emerging contaminants. In this contribution, the ability to determine the molecular level effects of 17β-estradiol on single MCF-7 cells using Fourier transform infrared imaging spectroscopy (FT-IRIS) was investigated. The use of FT-IRIS enabled subcellular imaging of the cells and determination of a dose dependent response in mucin concentration at 24 and 48 h of incubation. The 48 h increase in mucin was comparable to increases in cellular proliferation (Pearson R = 0.978). The EC50 values for the E-screen and FT-IRIS assays were 2.29 and 2.56 ppt, respectively, indicating that the molecular changes, which are observed at the single cell level using FT-IRIS, are reflective of physiological changes that are observed as the cell population responds to 17ß-estradiol. The FT-IRIS method, when combined with principal component analysis, enabled differentiation and grouping of cells exposed to varying concentrations of 17ß-estradiol. The FT-IRIS method shows potential to be used as a rapid and sensitive screening technique for the detection of biological responses to different emerging contaminants in relevant cells or tissues.

Molecular pathology via IR and Raman spectral imaging

During the last 15 years, vibrational spectroscopic methods have been developed that can be viewed as molecular pathology methods that depend on sampling the entire genome, proteome and metabolome of cells and tissues, rather than probing for the presence of selected markers. First, this review introduces the background and fundamentals of the spectroscopies underlying the new methodologies, namely infrared and Raman spectroscopy. Then, results are presented in the context of spectral histopathology of tissues for detection of metastases in lymph nodes, squamous cell carcinoma, adenocarcinomas, brain tumors and brain metastases. Results from spectral cytopathology of cells are discussed for screening of oral and cervical mucosa, and circulating tumor cells. It is concluded that infrared and Raman spectroscopy can complement histopathology and reveal information that is available in classical methods only by costly and time-consuming steps such as immunohistochemistry, polymerase chain reaction or gene arrays. Due to the inherent sensitivity toward changes in the bio-molecular composition of different cell and tissue types, vibrational spectroscopy can even provide information that is in some cases superior to that of any one of the conventional techniques.

Morphological analysis of vibrational hyperspectral imaging data

This study demonstrates the use of standard morphological image processing techniques to reduce the hyperspectral image data of samples, containing discrete particles or domains, to a single average spectrum per particle. The processing is automated and successful even when the particles are in contact. Focal Plane Array, Fourier transform infrared (FTIR) absorbance images of biological cells are used as an example dataset. The large number of spectra in the image (~40,000) can be intelligently averaged to ~100 mean spectra, approximately one per cell, greatly simplifying further analysis. As well as reducing the data, the morphological analysis provides useful information, such as the size of each cell, and allows every spectrum associated with each cell to be identified and analysed independently of the full dataset. Using these methods, combined with principal components analysis, consistent spectral differences are found between the spectra of the whole cells and a cell region approximately corresponding to the nucleus. These spectral differences compare well with previous IR measurements on whole CALU-1 cells and their isolated nuclei, but with a simpler sample preparation. The algorithm created to analyse the CALU-1 cells has been applied to a second cell line (NL20), which has a very different growth morphology, to demonstrate that this processing method is applicable to varied samples with little or no modification.

Opportunities for live cell FT-infrared imaging: macromolecule identification with 2D and 3D localization

Infrared (IR) spectromicroscopy, or chemical imaging, is an evolving technique that is poised to make significant contributions in the fields of biology and medicine. Recent developments in sources, detectors, measurement techniques and speciman holders have now made diffraction-limited Fourier transform infrared (FTIR) imaging of cellular chemistry in living cells a reality. The availability of bright, broadband IR sources and large area, pixelated detectors facilitate live cell imaging, which requires rapid measurements using non-destructive probes. In this work, we review advances in the field of FTIR spectromicroscopy that have contributed to live-cell two and three-dimensional IR imaging, and discuss several key examples that highlight the utility of this technique for studying the structure and chemistry of living cells.

Progress in Fourier Transform Infrared Spectroscopic Imaging Applied to Venereal Cancer Diagnosis

Fourier transform infrared imaging spectroscopy is a powerful technique that provides molecular and spatial information at the single-cell level. We report on the progress of this technology in the field of cancer research, focusing on human cervical cancer because of the inherent difficulty in grading this type of cancer and as a model for venereal cancers in dogs. Using a suite of multivariate imaging processing techniques, we demonstrate the potential of this technique to identify histologic features in the normal epithelium and cervical intraepithelial neoplasia stages I and III. We highlight the advantages and detail the barriers that need to be overcome before implementation of this technology in the clinical environment.

The action of all-trans-retinoic acid (ATRA) and synthetic retinoid analogues (EC19 and EC23) on human pluripotent stem cells differentiation investigated using single cell infrared microspectroscopy

All trans-retinoic acid (ATRA) is widely used to direct the differentiation of cultured stem cells. When exposed to the pluripotent human embryonal carcinoma (EC) stem cell line, TERA2.cl.SP12, ATRA induces ectoderm differentiation and the formation of neuronal cell types. We have previously generated synthetic analogues of retinoic acid (EC23 and EC19) which also induce the differentiation of EC cells. Even though EC23 and EC19 have similar chemical structures, they have differing biochemical effects in terms of EC cell differentiation. EC23 induces neuronal differentiation in a manner similar to ATRA, whereas EC19 directs the cells to form epithelial-like derivatives. Previous MALDI-TOF MS analysis examined the response of TERA2.cl.SP12 cells after exposure to ATRA, EC23 and EC19 and further demonstrated the similarly in the effect of ATRA and EC23 activity whilst responses to EC19 were very different. In this study, we show that Fourier Transform Infrared Micro-Spectroscopy (FT-IRMS) coupled with appropriate scatter correction and multivariate analysis can be used as an effective tool to further investigate the differentiation of human pluripotent stem cells and monitor the alternative affects different retinoid compounds have on the induction of differentiation. FT-IRMS detected differences between cell populations as early as 3 days of compound treatment. Populations of cells treated with different retinoid compounds could easily be distinguished from one another during the early stages of cell differentiation. These data demonstrate that FT-IRMS technology can be used as a sensitive screening technique to monitor the status of the stem cell phenotype and progression of differentiation along alternative pathways in response to different compounds.

Substrate contributions in micro-ATR of thin samples: implications for analysis of cells, tissue and biological fluids

Low-e microscope slides are a common substrate for biological samples. Typically they are used for transflection infrared microspectroscopy but increasingly they are also being used for micro-ATR experiments since it is assumed that the FTIR-ATR absorbance spectra of cells and tissue on low-e substrates will not contain any spectral contributions from the substrate materials. This, in part, is due to the expectation that all the infrared light will be reflected at the highly reflective surface. At low sample thicknesses, however (e.g. less than 2 μm) the electric field does indeed penetrate through the substrate layers and undergoes absorption, from the glass supporting layer making up the majority of the slide. In this paper we show experimental evidence of the substrate contributions in ATR spectra and also a theoretical model giving insight into the spectral contributions of the substrate as a function of sample thickness.