Metal-Containing Polystyrene Beads as Standards for Mass Cytometry

Determination of carbon in microplastics and single cells by total consumption microdroplet ICP-TOFMS

Recently, spICP-MS analyses of microplastics have demonstrated that the detection capabilities of ICP-MS are sufficient to determine the size and composition of such materials. However, solution nebulization or microdroplet generation limits the sizes of droplets, microparticles, or cells that can be efficiently introduced into commonly used horizontal ICP-MS configurations. Therefore, we introduced the development of a downward-pointing ICP coupled to a time-of-flight mass spectrometer (ICP-TOFMS), which enables quantitative transport of large microdroplets (diameters up to 90 µm) into the ICP. Here, we report the capabilities of downward ICP-TOFMS for the quantitative analysis of single cells and microplastic particles. For calibration of element mass amount per particle or cell, microdroplets (70 µm diameter) composed of multielement solutions were measured by ICP-TOFMS. Microplastic beads (polystyrene) and spleenocyte cells were then also embedded in microdroplets and measured by ICP-TOFMS with ion optics optimized to determine the signals from 12C+ and other isotopes of interest, including 140Ce, 153Eu, 165Ho, and 175Lu from the REE beads and 31P for the cells. The results achieved using the prototype instrument of a vertical downward-pointing ICP-TOFMS demonstrate that such a plasma configuration is well suited to analyze microplastics and single cells. For single microbead and cell analyses, the critical mass for carbon was 4.8 pg, and the mean determined carbon mass amounts were 14 and 23 pg, respectively. For the microbead analysis, the detected carbon mass corresponds to a particle diameter of 2.93 ± 0.24 µm, which is consistent with the scanning (transmission) electron microscopy-determined diameter of 2.97 ± 0.04 µm. Furthermore, in the analysis of spleenocyte cells, carbon and phosphorus masses were determined to be correlated.

All-in-One Microfluidic Chip for Online Labeling, Separating, and Focusing Rare Circulating Tumor Cells from Blood Samples Followed by Inductively Coupled Plasma Mass Spectrometry Detection

Circulating tumor cell (CTC) detection is essential for early cancer diagnosis and evaluating treatment efficacy. Despite the growing interest in isolating CTCs and further quantifying surface biomarkers at the single-cell level, highly efficient separation of rare CTCs from massive blood cells is still a big challenge. Here, we developed an all-in-one microfluidic chip system for the immunolabeling, magnetic separation, and focusing of HepG2 cells (as a CTC model) and online combined it with single cell-inductively coupled plasma mass spectrometry (SC-ICP-MS) for quantitative analysis of the asialoglycoprotein receptor (ASGPR) on single HepG2 cells. Lanthanide-labeled anti-ASGPR monoclonal antibody and antiepithelial cell adhesion molecule-modified magnetic beads were prepared as signal and magnetic probes, respectively. Target cells were highly efficiently labeled with signal and magnetic probes in the mixing zone of the microfluidic chip and then focused and sorted in the separation zone by specific magnetic separation techniques to avoid matrix contamination. The average cell recovery of HepG2 cells was derived to be 94.1 ± 5.7% with high separation efficiency and purity. The sorted cells with signal probes were detected for enumeration and quantification of ASGPR on their surface by SC-ICP-MS. The developed method showed good specificity and high sensitivity, detecting an average of (1.0 ± 0.2) × 105 ASGPR molecules per cell surface. This method can be used for absolute quantitative analysis of ASGPR on the surface of single hepatocellular carcinoma cells in real-world samples, providing a highly efficient analytical platform for studying targeted drug delivery in cancer therapy.

A universal mass tag based on polystyrene nanoparticles for single-cell multiplexing with mass cytometry

Mass cytometry (MC) is an emerging bioanalytical technique for high-dimensional biomarkers interrogation simultaneously on individual cells. However, the sensitivity and multiplexed analysis ability of MC was highly restricted by the current metal chelating polymer (MCP) mass tags. Herein, a new design strategy for MC mass tags by using a commercial available and low cost classical material, polystyrene nanoparticle (PS-NP) to carry metals was reported. Unlike inorganic materials, sub-micron-grade metal-loaded polystyrene can be easily detected by MC, thus it is not essential to pursue extremely small particle size in this mass tag design strategy. An altered cell staining buffer can significantly lower the nonspecific binding (NSB) of non-functionalized PS-NPs, revealing another method to lower NSB beside surface modification. The metal doped PS-NP_Abs mass tags showed high compatibility with MCP mass tags and 5-fold higher sensitivity. By using Hf doped PS-NP_Abs as mass tags, four new MC detection channels (¹⁷⁷Hf, ¹⁷⁸Hf, ¹⁷⁹Hf and ¹⁸⁰Hf) were developed. In general, this work provides a new strategy in designing MC mass tags and lowering NSB, opening up possibility of introducing more potential MC mass tag candidates.

Online microdroplet calibration for accurate nanoparticle quantification in organic matrices

Single-particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOFMS) is a high-throughput method for the multiplexed analysis of nanoparticles (NPs). However, matrix interferences are a significant challenge that must be overcome for accurate NP sizing and number concentration determination. In online microdroplet calibration, multi-element droplet standards are mixed with nebulized aerosols from a NP-containing sample in a dual-sample introduction system before entering the ICP. Microdroplet standards are used to determine absolute sensitivities and calibrate the mass amount(s) of analyte element(s) in particle events. A plasma-uptake standard is added to NP-containing samples to account for variations in the nebulization and transport efficiency of aerosols into the plasma, which are used in the determination of particle number concentrations (PNCs). Since the microdroplets experience the same plasma conditions as analyte NPs, this creates a matrix-matched calibration. We studied the efficacy of online microdroplet calibration for the quantification of NPs in three organic matrices: ethanol, acetone, and acetonitrile. Organic solvents can cause a pronounced increase in sample uptake and cause plasma-related signal attenuation for nanoparticle measurements. Online microdroplet calibration corrects for both effects without the use of nanoparticle standards. Our results demonstrate accurate NP sizing and PNC determinations in organic matrices up to 98% (v/v), even when these matrices caused signals to be attenuated up to 35-times and nebulizer transport efficiencies to be up to four-times higher than that of a pure water matrix.

Living in a transient world: ICP-MS reinvented via time-resolved analysis for monitoring single events

After 40 years of development, inductively coupled plasma-mass spectrometry (ICP-MS) can hardly be considered as a novel technique anymore. ICP-MS has become the reference when it comes to multi-element bulk analysis at (ultra)trace levels, as well as to isotope ratio determination for metal(loid)s. However, over the last decade, this technique has managed to uncover an entirely new application field, providing information in a variety of contexts related to the individual analysis of single entities (e.g., nanoparticles, cells, or micro/nanoplastics), thus addressing new societal challenges. And this profound expansion of its application range becomes even more remarkable when considering that it has been made possible in an a priori simple way: by providing faster data acquisition and developing the corresponding theoretical substrate to relate the time-resolved signals thus obtained with the elemental composition of the target entities. This review presents the underlying concepts behind single event-ICP-MS, which are needed to fully understand its potential, highlighting key areas of application (e.g., single particle-ICP-MS or single cell-ICP-MS) as well as of future development (e.g., micro/nanoplastics).

Exploring Sensitive Label-Free Multiplex Analysis with Raman-Coded Microbeads and SERS-Coded Reporters

Suspension microsphere immunoassays are rapidly gaining attention in multiplex bioassays. Accurate detection of multiple analytes from a single measurement is critical in modern bioanalysis, which always requires complex encoding systems. In this study, a novel bioassay with Raman-coded antibody supports (polymer microbeads with different Raman signatures) and surface-enhanced Raman scattering (SERS)-coded nanotags (organic thiols on a gold nanoparticle surface with different SERS signatures) was developed as a model fluorescent, label-free, bead-based multiplex immunoassay system. The developed homogeneous immunoassays included two surface-functionalized monodisperse Raman-coded microbeads of polystyrene and poly(4-tert-butylstyrene) as the immune solid supports, and two epitope modified nanotags (self-assembled 4-mercaptobenzoic acid or 3-mercaptopropionic acid on gold nanoparticles) as the SERS-coded reporters. Such multiplex Raman/SERS-based microsphere immunoassays could selectively identify specific paratope–epitope interactions from one mixture sample solution under a single laser illumination, and thus hold great promise in future suspension multiplex analysis for diverse biomedical applications.

Functional Micro-/Nanomaterials for Multiplexed Biodetection

When analyzing biological phenomena and processes, multiplexed biodetection has many advantages over single-factor biodetection and is highly relevant to both human health issues and advancements in the life sciences. However, many key problems with current multiplexed biodetection strategies remain unresolved. Herein, the main issues are analyzed and summarized: 1) generating sufficient signal to label targets, 2) improving the signal-to-noise ratio to ensure total detection sensitivity, and 3) simplifying the detection process to reduce the time and labor costs of multiple target detection. Then, available solutions made possible by designing and controlling the properties of micro- and nanomaterials are introduced. The aim is to emphasize the role that micro-/nanomaterials can play in the improvement of multiplexed biodetection strategies. Through analyzing existing problems, introducing state-of-the-art developments regarding relevant materials, and discussing future directions of the field, it is hopeful to help promote necessary developments in multiplexed biodetection and associated scientific research.

High Throughput Multi-Omics Approaches for Clinical Trial Evaluation and Drug Discovery

High throughput single cell multi-omics platforms, such as mass cytometry (cytometry by time-of-flight; CyTOF), high dimensional imaging (>6 marker; Hyperion, MIBIscope, CODEX, MACSima) and the recently evolved genomic cytometry (Citeseq or REAPseq) have enabled unprecedented insights into many biological and clinical questions, such as hematopoiesis, transplantation, cancer, and autoimmunity. In synergy with constantly adapting new single-cell analysis approaches and subsequent accumulating big data collections from these platforms, whole atlases of cell types and cellular and sub-cellular interaction networks are created. These atlases build an ideal scientific discovery environment for reference and data mining approaches, which often times reveals new cellular disease networks. In this review we will discuss how combinations and fusions of different -omic workflows on a single cell level can be used to examine cellular phenotypes, immune effector functions, and even dynamic changes, such as metabolomic state of different cells in a sample or even in a defined tissue location. We will touch on how pre-print platforms help in optimization and reproducibility of workflows, as well as community outreach. We will also shortly discuss how leveraging single cell multi-omic approaches can be used to accelerate cellular biomarker discovery during clinical trials to predict response to therapy, follow responsive cell types, and define novel druggable target pathways. Single cell proteome approaches already have changed how we explore cellular mechanism in disease and during therapy. Current challenges in the field are how we share these disruptive technologies to the scientific communities while still including new approaches, such as genomic cytometry and single cell metabolomics.

Establishing CD19 B-cell reference control materials for comparable and quantitative cytometric expression analysis

In the field of cell-based therapeutics, there is a great need for high-quality, robust, and validated measurements for cell characterization. Flow cytometry has emerged as a critically important platform due to its high-throughput capability and its ability to simultaneously measure multiple parameters in the same sample. However, to assure the confidence in measurement, well characterized biological reference materials are needed for standardizing clinical assays and harmonizing flow cytometric results between laboratories. To date, the lack of adequate reference materials, and the complexity of the cytometer instrumentation have resulted in few standards. This study was designed to evaluate CD19 expression in three potential biological cell reference materials and provide a preliminary assessment of their suitability to support future development of CD19 reference standards. Three commercially available human peripheral blood mononuclear cells (PBMCs) obtained from three different manufacturers were tested. Variables that could potentially contribute to the differences in the CD19 expression, such as PBMCs manufacturing process, number of healthy donors used in manufacturing each PBMC lot, antibody reagent, operators, and experimental days were included in our evaluation. CD19 antibodies bound per cell (ABC) values were measured using two flow cytometry-based quantification schemes with two independent calibration methods, a single point calibration using a CD4 reference cell and QuantiBrite PE bead calibration. Three lots of PBMC from three different manufacturers were obtained. Each lot of PBMC was tested on three different experimental days by three operators using three different lots of unimolar anti-CD19PE conjugates. CD19 ABC values were obtained in parallel on a selected lot of the PBMC samples using mass spectrometry (CyTOF) with two independent calibration methods, EQ4 and bead-based calibration were evaluated with CyTOF-technology. Including all studied variabilities such as PBMC lot, antibody reagent lot, and operator, the averaged mean values of CD19 ABC for the three PBMC manufacturers (A,B, and C) obtained by flow cytometry were found to be: 7953 with a %CV of 9.0 for PBMC-A, 10535 with a %CV of 7.8 for PBMC-B, and 12384 with a %CV of 16 for PBMC-C. These CD19 ABC values agree closely with the findings using CyTOF. The averaged mean values of CD19 ABC for the tested PBMCs is 9295 using flow cytometry-based method and 9699 using CyTOF. The relative contributions from various sources of uncertainty in CD19 ABC values were quantified for the flow cytometry-based measurement scheme. This uncertainty analysis suggests that the number of antigens or ligand binding sites per cell in each PBMC preparation is the largest source of variability. On the other hand, the calibration method does not add significant uncertainty to the expression estimates. Our preliminary assessment showed the suitability of the tested materials to serve as PBMC-based CD19+ reference control materials for use in quantifying relevant B cell markers in B cell lymphoproliferative disorders and immunotherapy. However, users should consider the variabilities resulting from different lots of PBMC and antibody reagent when utilizing cell-based reference materials for quantification purposes and perform bridging studies to ensure harmonization between the results before switching to a new lot.

New Orientation: A Downward-pointing Vertical Inductively Coupled Plasma Mass Spectrometer for the Analysis of Microsamples

We present a prototype of a vertical-downward configuration of an inductively coupled plasma mass spectrometer (ICPMS) allowing the sample introduction from the top. With this novel approach to orient the ICP downward, we aim to expand the sample transport capabilities in ICPMS especially for the transport of droplets or particles with a final goal to analyze individual cells. Because of this gravity-assisted sampling approach, the transport of larger sized droplets, that is, droplets that would be difficult to transport into a horizontally oriented ICPMS, becomes possible and, furthermore, becomes independent of the droplets' size or size distribution. We demonstrate that droplets of an initial size of 70 μm can be successfully transported into the plasma at dispensing frequencies up to 1 kHz without the need for a desolvation device. In addition, we observed that the implementation of a desolvation device, that is, a gas-exchange device (GED), can improve the detection efficiencies (DEs). Compared to operating conditions that are commonly reported for ICPMS experiments, significantly different optimization parameters (radio frequency power and gas flow rates) were tested in the presented experiments here while instrument type-specific DEs were obtained.

Mass Cytometry Tags: Where Chemistry Meets Single-Cell Analysis

Mass cytometry is a highly multiparametric proteomic technology that allows the measurement and quantification of nearly 50 markers with single-cell resolution. Mass cytometry reagents are probes tagged with metal isotopes of defined mass and act as reporters. Metals are detected using inductively coupled plasma time-of-flight mass spectrometry (ICP-TOF-MS). Many different types of mass-tag reagents have been developed to afford myriad applications. We have classified these compounds into polymer-based mass-tag reagents, nonpolymer-based mass-tag reagents, and inorganic nanoparticles. Metal-chelating polymers (MCPs) are widely used to profile and quantify cellular biomarkers; however, both the range of metals that can be detected and the metal signals have to be improved. Several strategies such as the inclusion of chelating agents or highly branched polymers may overcome these issues. Biocompatible materials such as polystyrene and inorganic nanoparticles are also of profound interest in mass cytometry. While polystyrene allows the inclusion of a wide variety of metals, the high metal content of inorganic nanoparticles offers an excellent opportunity to increase the signal from the metals to detect low-abundance biomarkers. Nonpolymer-based mass-tag reagents offer multiple applications: cell detection, cell cycle property determination, biomarker detection, and mass-tag cellular barcoding (MCB). Recent developments have been achieved in live cell barcoding by targeting proteins (CD45, b2m, and CD298), by using small and nonpolar probes or by ratiometric barcoding. From this perspective, the principal applications, strengths, and shortcomings of mass-tag reagents are highlighted, summarized, and discussed, with special emphasis on mass-tag reagents for MCB. Thereafter, the future perspectives of mass-tag reagents are discussed considering the current state-of-the-art technologies.

Metal-Encoded Polystyrene Microbeads as a Mass Cytometry Calibration/Normalization Standard Covering Channels from Yttrium (89 amu) to Bismuth (209 amu)

Mass cytometry (MC) measures metal isotope signals from single cells and bead samples. Since large numbers of isotopes can be employed as labels, mass cytometry is a powerful analytical technique for multiparameter cytometric assays. The calibration protocol in MC is a critical algorithm, which employs metal-encoded microbeads as an internal standard to correct the data for instrumental signal drift. The current generation of commercially available beads carries four lanthanide elements (cerium, europium, holmium, and lutetium). However, this is not sufficient to calibrate the full span of detection channels, ranging from yttrium (89 amu) to bismuth (209 amu), which are now available. To address this issue we prepared polystyrene microbeads encoded with seven elements (yttrium, indium, and bismuth in addition to the four lanthanides) by multistage dispersion polymerization for MC calibration and normalization. The bead synthesis conditions were optimized to obtain microbeads that were uniform in size and generated strong MC signal intensities at similar levels for the eight encoded isotopes. Metal ion leaching from the beads under storage and application conditions was also examined. We demonstrated that the precision of normalized MC signals in the MC detection channels was improved by employing seven-element-encoded microbeads as a standard.

Guidelines for the use of flow cytometry and cell sorting in immunological studies (second edition)

These guidelines are a consensus work of a considerable number of members of the immunology and flow cytometry community. They provide the theory and key practical aspects of flow cytometry enabling immunologists to avoid the common errors that often undermine immunological data. Notably, there are comprehensive sections of all major immune cell types with helpful Tables detailing phenotypes in murine and human cells. The latest flow cytometry techniques and applications are also described, featuring examples of the data that can be generated and, importantly, how the data can be analysed. Furthermore, there are sections detailing tips, tricks and pitfalls to avoid, all written and peer-reviewed by leading experts in the field, making this an essential research companion.

Methods for discovery and characterization of cell subsets in high dimensional mass cytometry data

The flood of high-dimensional data resulting from mass cytometry experiments that measure more than 40 features of individual cells has stimulated creation of new single cell computational biology tools. These tools draw on advances in the field of machine learning to capture multi-parametric relationships and reveal cells that are easily overlooked in traditional analysis. Here, we introduce a workflow for high dimensional mass cytometry data that emphasizes unsupervised approaches and visualizes data in both single cell and population level views. This workflow includes three central components that are common across mass cytometry analysis approaches: (1) distinguishing initial populations, (2) revealing cell subsets, and (3) characterizing subset features. In the implementation described here, viSNE, SPADE, and heatmaps were used sequentially to comprehensively characterize and compare healthy and malignant human tissue samples. The use of multiple methods helps provide a comprehensive view of results, and the largely unsupervised workflow facilitates automation and helps researchers avoid missing cell populations with unusual or unexpected phenotypes. Together, these methods develop a framework for future machine learning of cell identity.

Inductively coupled plasma mass spectrometry-based immunoassay: a review

The last 10 years witnessed the emerging and growing up of inductively coupled plasma mass spectrometry (ICPMS)-based immunoassay. Its high sensitivity and multiplex potential have made ICPMS a revolutionary technique for bioanalyte quantification after element-tagged immunoassay. This review focuses on the major developments and the applications of ICPMS-based immunoassay, with emphasis on methodological innovations. The ICPMS-based immunoassay with elemental tags of metal ions, nanoparticles, and metal containing polymers was discussed in detail. The recent development of multiplex assay, mass cytometry, suspension array, and surface analysis demonstrated the versatility and great potential of this technique. ICPMS-based immunoassay has become one of the key methods in bioanalysis.

Unraveling cell populations in tumors by single-cell mass cytometry

The development of new biotechnologies for the analysis of individual cells in heterogeneous populations is an important direction of life science research. This review provides a critical overview of relevant and recent advances in the field of single-cell mass cytometry, focusing on the latest applications in the study of cell heterogeneity. New approaches for multiparameter single-cell imaging, alongside advanced computational tools for deep mining of high-dimensional mass cytometric data, are facilitating the visualization of specific cell types and their interactions in complex cellular assemblies, such as tumors, potentially revealing new insights into cancer biology.

Single-cell mass cytometry for analysis of immune system functional states

Mass cytometry facilitates high-dimensional, quantitative analysis of the effects of bioactive molecules on cell populations at single-cell resolution. Datasets are generated with panels of up to 45 antibodies. Each antibody is conjugated to a polymer chelated with a stable metal isotope, usually in the lanthanide series of the periodic table. Antibody panels recognize surface markers to delineate cell types simultaneously with intracellular signaling molecules to measure biological functions, such as metabolism, survival, DNA damage, cell cycle and apoptosis, to provide an overall determination of the network state of an individual cell. This review will cover the basics of mass cytometry as well as outline assays developed for the platform that enhance the immunologist's analytical arsenal.

Determination of quantum dots in single cells by inductively coupled plasma mass spectrometry

In order to assess cytotoxicity of quantum dots (QDs), new reliable analytical techniques that can provide comparative information at a single-cell level are required. In this study, a single cell ICP-MS (SC-ICP-MS) method was established to determine intracellular QDs in single cells after exposure. Uptake kinetics of QDs into cells was studied using the established method. The results were compared and validated by flow cytometry and cell digestion methods. In contrast to other methods, SC-ICP-MS can directly detect QDs and their degradation products via elements, and thus is a promising complement to available methods for single cell analysis and is expected to be a critical tool in the future.

Normalization of mass cytometry data with bead standards

Mass cytometry uses atomic mass spectrometry combined with isotopically pure reporter elements to currently measure as many as 40 parameters per single cell. As with any quantitative technology, there is a fundamental need for quality assurance and normalization protocols. In the case of mass cytometry, the signal variation over time due to changes in instrument performance combined with intervals between scheduled maintenance must be accounted for and then normalized. Here, samples were mixed with polystyrene beads embedded with metal lanthanides, allowing monitoring of mass cytometry instrument performance over multiple days of data acquisition. The protocol described here includes simultaneous measurements of beads and cells on the mass cytometer, subsequent extraction of the bead-based signature, and the application of an algorithm enabling correction of both short- and long-term signal fluctuations. The variation in the intensity of the beads that remains after normalization may also be used to determine data quality. Application of the algorithm to a one-month longitudinal analysis of a human peripheral blood sample reduced the range of median signal fluctuation from 4.9-fold to 1.3-fold.

A deep profiler's guide to cytometry

In recent years, advances in technology have provided us with tools to quantify the expression of multiple genes in individual cells. The ability to measure simultaneously multiple genes in the same cell is necessary to resolve the great diversity of cell subsets, as well as to define their function in the host. Fluorescence-based flow cytometry is the benchmark for this; with it, we can quantify 18 proteins per cell, at >10 000 cells/s. Mass cytometry is a new technology that promises to extend these capabilities significantly. Immunophenotyping by mass spectrometry provides the ability to measure >36 proteins at a rate of 1000 cells/s. We review these cytometric technologies, capable of high-content, high-throughput single-cell assays.

Surface Functionalization Methods to Enhance Bioconjugation in Metal-Labeled Polystyrene Particles

Lanthanide-encoded polystyrene particles synthesized by dispersion polymerization are excellent candidates for mass cytometry based immunoassays, however they have previously lacked the ability to conjugate biomolecules to the particle surface. We present here three approaches to post-functionalize these particles, enabling the covalent attachment of proteins. Our first approach used partially hydrolyzed poly(N-vinylpyrrolidone) as a dispersion polymerization stabilizer to synthesize particles with high concentration of -COOH groups on the particle surface. In an alternative strategy to provide -COOH functionality to the lanthanide-encoded particles, we employed seeded emulsion polymerization to graft poly(methacrylic acid) (PMAA) chains onto the surface of these particles. However, these two approaches gave little to no improvement in the extent of bioconjugation. In our third approach, seeded emulsion polymerization was subsequently used as a method to grow a functional polymer shell (in this case, poly(glycidyl methacrylate) (PGMA)) onto the surface of these particles, which proved highly successful. The epoxide-rich PGMA shell permitted extensive surface bioconjugation of NeutrAvidin, as probed by an Lu-labeled biotin reporter (ca. 7 × 10(5) binding events per particle with a very low amount of non-specific binding) and analyzed by mass cytometry. It was shown that coupling agents such as EDC were not needed, such was the reactivity of the particle surface. These particles were stable and the addition of a polymeric shell was shown did not affect the narrow lanthanide ion distribution within the particle interior as analyzed by mass cytometry. These particles represent the most promising candidates for the development of a highly multiplexed bioassay based on lanthanide-labeled particles to date.

Synthesis and mass cytometric analysis of lanthanide-encoded polyelectrolyte microgels

This article describes the synthesis and characterization of two series of functional polyelectrolyte copolymer microgels intended for bioassays based upon mass cytometry, a technique that detects metals by inductively coupled plasma mass spectrometry (ICP-MS). The microgels were loaded with Eu(III) ions, which were then converted in situ to EuF(3) nanoparticles (NPs). Both types of microgels are based upon copolymers of N-isopropylacrylamide (NIPAm) and methacrylic acid (MAA), poly(NIPAm/VCL/MAA) (VCL = N-vinylcaprolactam, V series), and poly(NIPAm/MAA/PEGMA) (PEGMA = poly(ethylene glycol)methacrylate, PG series). Very specific conditions (full neutralization of the MAA groups) were required to confine the EuF(3) NPs to the core of the microgels. We used mass cytometry to measure the number and the particle-to-particle variation of Eu ions per microgel. By controlling the amount of EuCl(3) added to the neutralized microgels. we could vary the atomic content of individual microgels from ca. 10(6) to 10(7) Eu atoms, either in the form of Eu(3+) ions or EuF(3) NPs. Leaching profiles of Eu ions from the hybrid microgels were measured by traditional ICP-MS.

Inductively coupled plasma mass spectrometry: recent trends and developments

This year inductively coupled plasma mass spectrometry (ICP-MS) moves into the fourth decade of development. In this article, some recent trends and developments in ICP-MS are reviewed, with special focus on instrumental development and emerging applications. Some key trends include a novel mass spectrometer for elemental and speciation analysis in Mattauch-Herzog geometry with a focal-plane-camera array detector. The reason for this development is the possibility to record the full elemental mass range simultaneously and all the time. Monitoring fast transient signals in chromatography or laser ablation is now possible and will become an important asset in future studies, e.g., for isotope ratio analysis. In addition, there is a lot of new activity and interest in the area of nanosciences and medicine. Here, instrumental developments are reported that allow the direct analysis of microparticles and single cells.

Highly multiparametric analysis by mass cytometry

This review paper describes a new technology, mass cytometry, that addresses applications typically run by flow cytometer analyzers, but extends the capability to highly multiparametric analysis. The detection technology is based on atomic mass spectrometry. It offers quantitation, specificity and dynamic range of mass spectrometry in a format that is familiar to flow cytometry practitioners. The mass cytometer does not require compensation, allowing the application of statistical techniques; this has been impossible given the constraints of fluorescence noise with traditional cytometry instruments. Instead of "colors" the mass cytometer "reads" the stable isotope tags attached to antibodies using metal-chelating labeling reagents. Because there are many available stable isotopes, and the mass spectrometer provides exquisite resolution between detection channels, many parameters can be measured as easily as one. For example, in a single tube the technique allows for the ready detection and characterization of the major cell subsets in blood or bone marrow. Here we describe mass cytometric immunophenotyping of human leukemia cell lines and leukemia patient samples, differential cell analysis of normal peripheral and umbilical cord blood; intracellular protein identification and metal-encoded bead arrays.

Bio-Functional, Lanthanide-Labeled Polymer Particles by Seeded Emulsion Polymerization and their Characterization by Novel ICP-MS Detection

We present the synthesis and characterization of monodisperse, sub-micron poly(styrene) (PS) particles loaded with up to and including 10(7) lanthanide (Ln) ions per particle. These particles have been synthesized by seeded emulsion polymerization with a mixture of monomer and a pre-formed Ln complex, and analyzed on a particle-by-particle basis by a unique inductively coupled plasma mass cytometer. Seed particles were prepared by surfactant-free emulsion polymerization (SFEP) to obtain large particle sizes in aqueous media. Extensive surface acid functionality was introduced using the acid-functional initiator ACVA, either during seed latex synthesis or in the second stage of polymerization. The loading of particles with three different Ln ions (Eu, Tb, and Ho) has proven to be close to 100 % efficient on an individual and combined basis. Covalent attachment of metal-tagged peptides and proteins such as Neutravidin to the particle surface was shown to be successful and the number of bound species can be readily determined. We believe these particles can serve as precursors for multiplexed, bead-based bio-assays utilizing mass cytometric detection.