Flexible Amorphous Silicon Radial Junction Patches Promote Skin Regeneration by Offering Wireless Photoelectric Neuromodulation

Photoelectric stimulation offers a promising method for creating noninvasive and durable interfaces with biological tissues, particularly in treating nerve injuries. However, developing flexible and high-performance photoelectric stimulators remains a challenge. In this study, we present an accessible and cost-effective strategy for fabricating an ultraflexible and biocompatible photoelectric patch designed for wireless, light-induced electrical stimulation to promote nerve repair in skin wounds. Using low-temperature chemical vapor deposition, we created flexible photoelectric films based on three-dimensional (3D) amorphous silicon radial p-i-n junction (RJ) nanowires, which exhibit a high open-circuit voltage of 0.79 V and a short-circuit current of 10.5 mA/cm2 under standard AM 1.5 G illumination conditions. The device exhibits good electrochemical performance in solution, featuring high interfacial capacitance and efficient photocurrent generation (∼0.64 mA/cm2), which ensures a stable, capacitive charge injection crucial for effective bioelectrical stimulation. Importantly, the free-standing RJ films can be reliably transferred onto soft poly(dimethylsiloxane) substrates to produce flexible photoelectric patches that maintain intimate contact with curved tissue surfaces. The RJ patches show high biocompatibility and effectively enhance neurite outgrowth and wound healing under safe visible light, promoting both vascular regeneration and neural restoration. This flexible patch holds potential in wireless electrical stimulation, providing a robust and noninvasive solution for comprehensive wound repair and functional tissue regeneration.

Silicon Nanowire Mats Enable Advanced Bioelectrical Recordings in Primary DRG Cell Cultures

Primary dorsal root ganglion (DRG) cell cultures provide a valuable model for studying in vitro sensory transduction, neuropathies, and chronic pain, as they replicate the in vivo heterogeneity of DRG neurons and non-neuronal cells. However, traditional patch-clamp techniques are invasive and cannot capture the collective cell dynamics. While planar multielectrode arrays (MEAs) offer a non-invasive alternative, they suffer from poor cell-electrode coupling and limited resolution for identifying specific DRG neuronal types like C-fiber nociceptors, key targets in chronic pain research. This work demonstrates that silicon nanowire (SiNW) mat-based MEAs, while maintaining their reduced invasiveness, enable continuous intracellular recordings from neurons in primary rat DRG cell cultures. Supported by a cortical astrocyte feeder layer, SiNW mats promote DRG neuron and glial cell growth preserving cells' in vivo morphological and functional characteristics. Integrated into a compartmentalized MEA, they enable reliable recordings of drug-modulated neuronal activity alongside a baseline related to the astrocyte layer. The recorded signals exhibit characteristics of intracellular action potentials, suggesting spontaneous intracellular access by SiNWs. Distinct electrophysiological signatures allow identifying C-fiber nociceptors, as confirmed by patch-clamp measurements. This platform represents a powerful tool for investigating in vitro pain mechanisms, with potential applications in preclinical pain research and pharmacological translational studies.

Engineering the Immune Response to Biomaterials

Biomaterials are increasingly used as implants in the body, but they often elicit tissue reactions due to the immune system recognizing them as foreign bodies. These reactions typically involve the activation of innate immunity and the initiation of an inflammatory response, which can persist as chronic inflammation, causing implant failure. To reduce these risks, various strategies have been developed to modify the material composition, surface characteristics, or mechanical properties of biomaterials. Moreover, bioactive materials have emerged as a new class of biomaterials that can induce desirable tissue responses and form a strong bond between the implant and the host tissue. In recent years, different immunomodulatory strategies have been incorporated into biomaterials as drug delivery systems. Furthermore, more advanced molecule and cell-based immunomodulators have been developed and integrated with biomaterials. These emerging strategies will enable better control of the immune response to biomaterials and improve the function and longevity of implants and, ultimately, the outcome of biomaterial-based therapies.

Focal adhesion dynamics-mediated cell migration and proliferation on silica bead arrays

Interactions between cells and the extracellular matrix (ECM) alter cellular behaviors, including adhesion, migration, proliferation, and differentiation via focal adhesions that link the ECM to the actin cytoskeleton as an intracellular signaling pathway. Although nanomaterials with various mechanical, geometrical, and topographical features have been used to provide a variety of cell-ECM interactions, it remains unclear how their nanostructured surfaces affect cellular behavior. In this study, we investigated focal adhesion dynamics during the migration and proliferation of HeLa cells on silica bead (SB) arrays with various nanotopographies. Cell adhesion was altered according to the surface curvature and pinhole size of the SB arrays, and cell morphology was determined by the ratio of the adhesive and non-adhesive areas of cells on the SB arrays. In turn, this triggered different focal adhesion dynamics in cells. In addition, we demonstrated the rapid migration and high proliferation characteristics of rounded cells with weak adhesion based on confocal microscopy analysis and migration trajectory on SB arrays, indicating focal adhesion dynamics-mediated cell migration and proliferation on nanostructured surfaces.

Ultrasensitive Electrochemical Screening of Circulating Tumor Cells Over Single-Atom Nanozyme Integrated 3D Nanoarray

Late-stage diagnosis is a major contributor to cancer mortality and thus leads to increased fatality, making early detection crucial for improving survival rates. Circulating tumor cells (CTC), detectable before primary tumors become clinically apparent, have emerged as vital biomarkers for the early identification of aggressive cancers. Here, develop a single-atom nanozyme integrated nanoarray as a 3D nano-biointerface for ultrasensitive electrochemical screening of CTCs from hepatocellular carcinoma. This cytosensor is capable of identifying CTC at a single-cell level, achieving an impressive area under the curve of 0.96 in receiver operating characteristics, comparable to simulated multi-indicator diagnostic strategies. This screening strategy shows great potential for the non-invasive early detection of hepatocellular carcinoma and is promising to be applied universally to early cancer diagnosis.

Design of a magnetically responsive artificial cilia array platform for microsphere transport

We present an innovative platform designed to mimic the mucociliary clearance system, an essential defense mechanism in the respiratory tract. Our system utilizes PDMS and iron powder to fabricate micro-ciliary arrays that dynamically respond to alternating magnetic fields. The cilia exhibit an asymmetric beating pattern under a cyclically varying magnetic field, which propels microspheres directionally in a fluid medium, simulating the movement of mucus. We use both experimental setups and numerical simulations to investigate factors that influence the efficiency of particle transport, such as cilia beating frequency, microsphere size, cilia density, and fluid viscosity. Our results elucidate the role of artificial cilia in surface cleaning processes and provide insights that enhance our understanding of mucociliary clearance. This novel experimental platform holds great promise for advancing research in respiratory health and microchannel cleaning technologies, and contributes to our ability to model and study human respiratory function in vitro.

Antibacterial properties and biological activity of 3D-printed titanium alloy implants with a near-infrared photoresponsive surface

PURPOSE

SLM 3D printing technology is one of the most widely used implant-making technologies. However, the surfaces of the implants are relatively rough, and bacteria can easily adhere to them; increasing the risk of postoperative infection. Therefore, we prepared a near-infrared photoresponsive nano-TiO2 coating on the surface of an SLM 3D-printed titanium alloy sheet (Ti6Al4V) via a hydrothermal method to evaluate its antibacterial properties and biocompatibility.

METHODS

Using SLM technology, titanium alloy sheets were 3D printed, and a nano-TiO2 coating was prepared on its surface via a hydrothermal method to obtain Ti6Al4V@TiO2. The surface morphology, physicochemical properties, and photothermal response of the samples were observed. The Ti6Al4V groups and Ti6Al4V@TiO2 groups were cocultured with S. aureus and E. coli and exposed to 808 nm NIR light (0.8 W/cm2) and viable plate count experiments and live/dead bacterial staining were used to assess their in vitro antibacterial properties.

RESULTS

The hydrophilicity of the nano-TiO2 coating sample significantly improved and the sample exhibited an excellent photothermal response. The temperature reached 46.9± 0.32 °C after 15 min of irradiation with 808 nm NIR light (0.8 W/cm2). The Ti6Al4V group showed significant antibacterial properties after irradiation with 808 nm NIR light, and the Ti6Al4V@TiO2 group also had partial antibacterial ability without irradiation. After irradiation with 808 nm NIR light, the Ti6Al4V@TiO2 group showed the strongest antibacterial properties, reaching 90.11± 2.20% and 90.60± 1.08% against S. aureus and E. coli, respectively.

CONCLUSIONS

A nano-TiO2 coating prepared via a hydrothermal method produced synergistic antibacterial effects after NIR light irradiation.

Nanotopography promotes cardiogenesis of pluripotent stem cell-derived embryoid bodies through focal adhesion kinase signaling

Controlling the microenvironment surrounding the pluripotent stem cells (PSCs) is a pivotal strategy for regulating cellular differentiation. Surface nanotopography is one of the key factors influencing the lineage-specific differentiation of PSCs. However, much of the underlying mechanism remains unknown. In this study, we focused on the effects of gradient nanotopography on the differentiation of embryoid bodies (EBs). EBs were cultured on three differently sized nanopillar surfaces (Large, 280-360; Medium, 200-280; Small, 120-200 nm) for spontaneous cardiomyocyte differentiation without chemical stimuli. The large nanotopography significantly promoted cardiogenesis, with increased expression of cardiac markers such as α-MHC, cTnT, and cTnI, and redistributed vinculin expression to the contact area. In addition, the small and medium nanotopographies also influenced EB differentiation, affecting both cardiogenesis and hematopoiesis to varying degrees. The phosphorylation of focal adhesion kinase (FAK) decreased in the EBs on the large nanotopography compared to that in the EBs cultured on the flat surface. The gradient nanotopography with 280-360 nm nanopillars is beneficial for the cardiogenesis of EBs in a FAK-dependent manner. This study provides valuable insights into controlling stem cell differentiation through nanotopographical cues, thereby advancing our understanding of the microenvironmental regulation in stem cell-based cardiac tissue engineering.

Profiling Phenotypic Heterogeneity of Circulating Tumor Cells through Spatially Resolved Immunocapture on Nanoporous Micropillar Arrays

The phenotype of circulating tumor cells (CTCs) offers valuable insights into monitoring cancer metastasis and recurrence. While microfluidics presents a promising approach for capturing these rare cells in blood, the phenotypic profiling of CTCs remains technically challenging. Herein, we developed a nanoporous micropillar array chip enabling highly efficient capture and in situ phenotypic analysis of CTCs through enhanced and tunable on-chip immunoaffinity binding. The nanoporous micropillar array addresses the fundamental limits in fluidic mass transfer, surface stagnant flow boundary effect, and interface topographic and multivalent reactions simultaneously within a single device, resulting in a synergistic enhancement of CTC immunocapture efficiency. The CTC capture efficiency increased by approximately 40% for cancer cells with low surface marker expressing. By manipulating fluidic velocity (hydrodynamic drag force) on the chip, a cell adhesion gradient was generated in the capture chamber, enabling individual CTCs with varying expression levels of epithelial cellular adhesion molecules to be immunocaptured at the corresponding spatial locations where equilibrium drag force is provided. The clinical utility of the nanoporous micropillar array was demonstrated by accurately distinguishing early and advanced stages of breast cancer and further longitudinally monitoring treatment response. We envision that the nanoporous micropillar array chip will provide an in situ capture and molecular profiling approach for CTCs and enhance the clinical application of CTC liquid biopsy.

Building better habitats: Spatiotemporal signaling cues in 3D biointerfaces for tailored cellular functionality

A promising research direction in the field of biological engineering is the design and functional programming of three-dimensional (3D) biointerfaces designed to support living cell functionality and growth in vitro, offering a route to precisely regulate cellular behaviors and phenotypes for addressing therapeutic challenges. While traditional two-dimensional (2D) biointerfaces have provided valuable insights, incorporating specific signaling cues into a 3D biointeractive microenvironment at the right locations and time is now recognized as crucial for accurately programming cellular decision-making and communication processes. This approach aims to engineer cell-centric microenvironments with the potential to recapitulate complex biological functions into a finite set of growing cellular organizations. Additionally, they provide insights into the hierarchical logic governing the relationship between molecular components and higher-order multicellular functionality. The functional live cell-based microenvironment engineered through such innovative biointerfaces has the potential to be used as an in vitro model system for expanding our understanding of cellular behaviors or as a therapeutic habitat where cellular functions can be reprogrammed.

Potential Application Prospects of Biomolecule-Modified Two-Dimensional Chiral Nanomaterials in Biomedicine

Chirality, one of the most fundamental properties of natural molecules, plays a significant role in biochemical reactions. Nanomaterials with chiral characteristics have superior properties, such as catalytic properties, optoelectronic properties, and photothermal properties, which have significant potential for specific applications in nanomedicine. Biomolecular modifications such as nucleic acids, peptides, proteins, and polysaccharides are sources of chirality for nanomaterials with great potential for application in addition to intrinsic chirality, artificial macromolecules, and metals. Two-dimensional (2D) nanomaterials, as opposed to other dimensions, due to proper surface area, extensive modification sites, drug loading potential, and simplicity of preparation, are prepared and utilized in diagnostic applications, drug delivery research, and tumor therapy. Current advanced studies on 2D chiral nanomaterials for biomedicine are focused on novel chiral development, structural control, and materials sustainability applications. However, despite the advances in biomedical research, chiral 2D nanomaterials still confront challenges such as the difficulty of synthesis, quality control, batch preparation, chiral stability, and chiral recognition and selectivity. This review aims to provide a comprehensive overview of the origins, synthesis, applications, and challenges of 2D chiral nanomaterials with biomolecules as cargo and chiral modifications and highlight their potential roles in biomedicine.

Photo-Controlled Gating of Selective Bacterial Membrane Interaction and Enhanced Antibacterial Activity for Wound Healing

Reversible biointerfaces are essential for on-demand molecular recognition to regulate stimuli-responsive bioactivity such as specific interactions with cell membranes. The reversibility on a single platform allows the smart material to kill pathogens or attach/detach cells. Herein, we introduce a 2D-MoS2 functionalized with cationic azobenzene that interacts selectively with either Gram-positive or Gram-negative bacteria in a light-gated fashion. The trans conformation (trans-Azo-MoS2 ) selectively kills Gram-negative bacteria, whereas the cis form (cis-Azo-MoS2 ), under UV light, exhibits antibacterial activity against Gram-positive strains. The mechanistic investigation indicates that the cis-Azo-MoS2 exhibits higher affinity towards the membrane of Gram-positive bacteria compared to trans-Azo-MoS2 . In case of Gram-negative bacteria, trans-Azo-MoS2 internalizes more efficiently than cis-Azo-MoS2 and generates intracellular ROS to kill the bacteria. While the trans-Azo-MoS2 exhibits strong electrostatic interactions and internalizes faster into Gram-negative bacterial cells, cis-Azo-MoS2 primarily interacts with Gram-positive bacteria through hydrophobic and H-bonding interactions. The difference in molecular mechanism leads to photo-controlled Gram-selectivity and enhanced antibacterial activity. We found strain-specific and high bactericidal activity (minimal bactericidal concentration, 0.65 μg/ml) with low cytotoxicity, which we extended to wound healing applications. This methodology provides a single platform for efficiently switching between conformers to reversibly control the strain-selective bactericidal activity regulated by light.

Defect-Induced Secondary Crystals Drive Two-Dimensional to Three-Dimensional Morphological Evolution in the Co-Self-Assembly of Polyferrocenylsilane Block Copolymer and Homopolymer

Bottom-up fabrication protocols for uniform 3D hierarchical structures in solution are rare. We report two different approaches to fabricate uniform 3D spherulites and their precursors using mixtures of poly(ferrocenyldimethylsilane) (PFS) block copolymer (BCP) and PFS homopolymer (HP). Both protocols are designed to promote defects in 2D assemblies that serve as intermediate structures. In a multistep seeded growth protocol, we add the BCP/HP mixture to (1D) rod-like PFS micelles in a selective solvent as first-generation seeds. This leads to 2D platelet structures. If this step is conducted at a high supersaturation, secondary crystals form on the basal surface of these platelets. Co-crystallization and rapid crystallization of BCP/HP promote the formation of defects that act as nucleation sites for secondary crystals, resulting in multilayer platelets. This is the key step. The multilayer platelets serve as second-generation seeds upon subsequent addition of BCP/HP blends and, with increasing supersaturation, lead to the sequential formation of uniform (3D) hedrites, sheaves, and spherulites. Similar structures can also be obtained by a simple one-pot direct self-assembly (heating-cooling-aging) protocol of PFS BCP/HP blends. In this case, for a carefully chosen but narrow temperature range, PFS HPs nucleate formation of uniform structures, and the annealing temperature regulates the supersaturation level. In both protocols, the competitive crystallization kinetics of HP/BCP affects the morphology. Both protocols exhibit broad generality. We believe the morphological transformation from 2D to 3D structures, regulated by defect formation, co-crystallization, and supersaturation levels, could apply to various semicrystalline polymers. Moreover, the 3D structures are sufficiently robust to serve as recoverable carriers for nanoparticle catalysts, exhibiting valuable catalytic activity and opening new possibilities for applications requiring exquisite 3D structures.

Interfacial Polymerization Produced Magnetic Particles with Nano-Filopodia for Highly Accurate Liquid Biopsy in the PSA Gray Zone

Magnetic particles are leading separation materials for biological purification and detection. Existing magnetic particles, which almost rely on molecule-level interactions, however, often encounter bottlenecks in highly efficient cell-level separation due to the underestimate of surface structure effects. Here, immune cell-inspired magnetic particles with nano-filopodia (NFMPs) produced by interfacial polymerization for highly efficient capture of circulating tumor cells (CTCs) and further accurate clinical diagnosis of prostate cancer are reported . The unprecedented construction of nano-filopodia on polymer-based magnetic particles is achieved by introducing electrostatic interactions in emulsion interfacial polymerization. Due to the unique nano-filopodia, the NFMPs allow remarkably enhanced CTCs capture efficiency (86.5% ± 2.8%) compared with smooth magnetic particles (SMPs, 35.7% ± 5.7%). Under the assistance of machine learning by combining with prostate-specific antigen (PSA) and free to total PSA (F/T-PSA), the NFMPs strategy demonstrates high sensitivity (100%), high specificity (93.3%), and a high area under the curve (AUC) value (98.1%) for clinical diagnosis of prostate cancer in the PSA gray zone. The NFMPs are anticipated as an efficient platform for CTCs-based liquid biopsy toward early cancer diagnosis and prognosis evaluation.

Hierarchical helical carbon nanotube fibre as a bone-integrating anterior cruciate ligament replacement

High rates of ligament damage require replacements; however, current synthetic materials have issues with bone integration leading to implant failure. Here we introduce an artificial ligament that has the required mechanical properties and can integrate with the host bone and restore movement in animals. The ligament is assembled from aligned carbon nanotubes formed into hierarchical helical fibres bearing nanometre and micrometre channels. Osseointegration of the artificial ligament is observed in an anterior cruciate ligament replacement model where clinical polymer controls showed bone resorption. A higher pull-out force is found after a 13-week implantation in rabbit and ovine models, and animals can run and jump normally. The long-term safety of the artificial ligament is demonstrated, and the pathways involved in integration are studied.

Revealing Low Amplitude Signals of Neuroendocrine Cells through Disordered Silicon Nanowires-Based Microelectrode Array

Today, the key methodology to study in vitro or in vivo electrical activity in a population of electrogenic cells, under physiological or pathological conditions, is by using microelectrode array (MEA). While significant efforts have been devoted to develop nanostructured MEAs for improving the electrophysiological investigation in neurons and cardiomyocytes, data on the recording of the electrical activity from neuroendocrine cells with MEA technology are scarce owing to their weaker electrical signals. Disordered silicon nanowires (SiNWs) for developing a MEA that, combined with a customized acquisition board, successfully capture the electrical signals generated by the corticotrope AtT-20 cells as a function of the extracellular calcium (Ca2+ ) concentration are reported. The recorded signals show a shape that clearly resembles the action potential waveform by suggesting a natural membrane penetration of the SiNWs. Additionally, the generation of synchronous signals observed under high Ca2+ content indicates the occurrence of a collective behavior in the AtT-20 cell population. This study extends the usefulness of MEA technology to the investigation of the electrical communication in cells of the pituitary gland, crucial in controlling several essential human functions, and provides new perspectives in recording with MEA the electrical activity of excitable cells.

Effects of material nano-topography on the angiogenesis of type H vessels: Size dependence, cell heterogeneity and intercellular communication

Type H vessel, a vascular subtype in bone, is a critical regulator of osteogenesis, but how material properties affect this organ-specific vessel remains unknown. Here, titania nanotubes were fabricated on bone implant surface to investigate the effects of nano-topography on type H vessels. In vivo, surface nanotubes with 20-100 nm diameters promoted the angiogenesis of type H vessels and bone regeneration in mouse femurs to different extents, with the best effects induced by 70 nm diameter. In vitro, bone-specific endothelial cells (BECs) and artery endothelial cells (AECs) presented significantly different behaviors on the same material. Nanotubes with 20 nm small diameters significantly improved the adhesion, proliferation, type H differentiation of BECs and their paracrine function to regulate pre-osteoblasts (POBs), possibly via binding integrin β1 on the cell membrane, but these effects weakened when tube diameter increased, which conflicted with the results in vivo. Further study suggested that the better in vivo effects by larger diameters of 70-100 nm might be exerted indirectly through remodeling the regulation from POBs to BECs, highlighting the underappreciated indirect bio-effects of materials via intercellular communication. These suggest that nanoscale material topography makes significant impact on the angiogenesis of type H vessels, directly via binding integrins on the cell membrane of BECs and indirectly via modulating the regulation from osteoblastic cells to BECs, both in a size-dependent manner. Cells of the same type but from different tissues may show different responses to the same material, thus material properties should be tailored to the specific cell population. In research on material-tissue interactions, conclusions from in vitro experiments exposing a single type of cell to material might deviate from the truth in vivo, because materials may indirectly influence the targeted cells through modulating intercellular communication. These provide new insights into material-tissue interactions.

Surface morphology regulation of colloidal Nanoparticles: A convenient Kinetically-Controlled seeded growth strategy

HYPOTHESIS

Except for chemical composition, surface morphology may endue colloidal nanoparticles with special interfacial behaviors, which is highly desired in certain scenarios, for example, ultra-stable Pickering emulsion for pharmaceutical applications where only limited chemicals are allowed. Herein, silica colloidal nanoparticle was chosen as a demo to illustrate a kinetically-controlled seeded growth strategy for the surface morphology regulation of colloidal nanoparticles.

EXPERIMENTS

Surface chemical heterogeneity was primarily introduced to the silica seed nanoparticles by a seeded growth process in the presence of mixed silicate moieties with thermodynamical incompatibility. Then a further kinetically-controlled seeded growth step was performed to regulate the surface morphology of silica nanoparticles by promoting the selective condensation of tetraethoxysilane on the hydrophilic microdomains.

FINDINGS

Upon reducing the growing rate, tetraethoxysilane hydrolysates tend to condensate on silica microdomains, resulting in the formation of raspberry-like nanoparticles. The generality of the kinetically-controlled seeded growth strategy was validated by its success on differently-sized silica seeds modified with a range of silane coupling agents. This established strategy is facile and effective for massive production of raspberry-like silica colloidal nanoparticles with precisely-designed surface morphology and size, offering an ideal platform for the investigation on the exclusive contribution of morphology to the interfacial behaviors of nanoparticles.

Ice-templated synthesis of multicomponent porous coatings via vapour sublimation and deposition polymerization

A multicomponent vapour-deposited porous (MVP) coating with combined physical and biochemical properties was fabricated based on a chemical vapour sublimation and deposition process. Multiple components are used based on their natural thermodynamic properties, being volatile and/or nonvolatile, resulting in the sublimation of water vapour (from an iced template), and a simultaneous deposition process of poly-p-xylylene occurs upon radical polymerization into a disordered structure, forming porous coatings of MVP on various substrates. In terms of physical properties, the coating technology exhibits adjustable hydrophobicity by tuning the surface morphology by timed control of the sublimation of the iced template layer from a substrate. However, by using a nonvolatile solution during fabrication, an impregnation process of the deposited poly-p-xylylene on such a solution with tuning contact angles produces an MVP coating with a customizable elastic modulus based on deformation-elasticity theory. Moreover, patterning physical structures with adjustable pore size and/or porosity of the coatings, as well as modulation and compartmentalization to introduce necessary boundaries of microstructures within one MVP coating layer, can be achieved during the proposed fabrication process. Finally, with a combination of defined solutions comprised of both volatile and nonvolatile multicomponents, including functional biomolecules, growth factor proteins, and living cells, the fabrication of the resultant MVP coating serves devised purposes exhibiting a variety of biological functions demonstrated with versatility for cell proliferation, osteogenesis, adipogenesis, odontogenesis, spheroid growth of stem cells, and a complex coculture system towards angiogenesis. Multicomponent porous coating technology is produced based on vapour sublimation and deposition upon radical polymerization that overturns conventional vapour-deposited coatings, resulting in only dense thin films, and in addition, the versatility of adjusting coating physical and chemical properties by exploiting the volatility mechanism of iced solution templates and accommodation of solute substances during the fabrication process. The MVP coating and the proposed fabrication technique represent a simple approach to provide a prospective interface coating layer for materials science and are attractive for unlimited applications.

Integrated construction of silkworm cocoon-inspired 3D scaffold for improving cell manufacture and cryopreservation

Although cellular therapy holds enormous promise in treating intractable diseases, its application potential has been significantly hampered due to the scarcity of reliable and consistent cell sources. Therefore, a high-efficiency strategy that improves cell production and storage is desperately needed. Herein, we develop a versatile 3D bioinspired scaffold (Cryosilk) for improving scalable cell manufacture and cryopreservation. A bottom-up fabrication technique integrating electrospinning, in situ surface functionalization and freeze-shaping was explored to construct Cryosilk with biomimetic features and functions of silkworm cocoons. Cryosilk is composed of a core-shell heterostructure with silk fibroin/poly alanine fiber core and silk sericin shell, generating a 3D cocoon-mimicking fibrous structure. Importantly, Cryosilk possesses improved thermal conductivity and ice crystal resistance capability, thus enabling to cryopreserve biological samples with minimal cryodamage. Furthermore, Cryosilk not only promotes cell adhesion and growth, but achieves rapid and uniform rewarming process, which provides high cryopreservation efficacy for immune cells and stem cells. Particularly, Cryosilk can maintain cell viability and biofunctions of stem cell-scaffold constructs after freeze-thawing, which can be directly implanted to promote wound healing. Thus, Cryosilk offers unprecedented efficacy in cell manufacture and cryopreservation, which provides sufficient and high-quality precious cells and tissue engineered scaffolds for cellular therapy.

Reaction-Based Scalable Inorganic Patterning on Rigid and Soft Substrates for Photovoltaic Roofs with Minimal Optical Loss and Sustainable Sunlight-Driven-Cleaning Windows

Recently developed fabrication methods for inorganic patterns (such as laser printing and optical lithography) can avoid some patterning processes conducted by conventional etching and lithography (such as substrate etching and modulation) and are thereby useful for applications in which the substrates and materials must not be damaged during patterning. Simultaneously, it is also necessary to develop facile and economical methods producing inorganic patterns on various substrates without requiring a special apparatus while attaining the above-mentioned advantages. The present study proposes a reaction-based method for fabricating inorganic patterns by immersing substrates coated with a colloidal nanosheet into an aqueous solution containing inorganic precursors. Silica and TiO₂ patterns spontaneously developed during the conversion of each inorganic precursor. These patterns were successful on rigid and flexible substrates. We fabricated these patterns on a wafer-sized silicon and large flexible poly(ethylene terephthalate) film, suggesting the scalability. We fabricated a biomimetic pattern on both sides of a glass window, as a photovoltaic roof, for minimal optical losses to maximally present photovoltaic effects of a solar cell. The TiO₂ pattern on glass window exhibits sustainable sunlight-driven-cleaning activity for contaminants. The method could provide a platform for economical high-performance inorganic patterns for energy, environmental, electronics, and other areas.

Delivering Mechanical Stimulation to Cells: State of the Art in Materials and Devices Design

Biochemical signals, such as growth factors, cytokines, and transcription factors are known to play a crucial role in regulating a variety of cellular activities as well as maintaining the normal function of different tissues and organs. If the biochemical signals are assumed to be one side of the coin, the other side comprises biophysical cues. There is growing evidence showing that biophysical signals, and in particular mechanical cues, also play an important role in different stages of human life ranging from morphogenesis during embryonic development to maturation and maintenance of tissue and organ function throughout life. In order to investigate how mechanical signals influence cell and tissue function, tremendous efforts have been devoted to fabricating various materials and devices for delivering mechanical stimuli to cells and tissues. Here, an overview of the current state of the art in the design and development of such materials and devices is provided, with a focus on their design principles, and challenges and perspectives for future research directions are highlighted.

Bioinspired All-in-One Three-Dimensional Dynamic CellMatrix Improves the Manufacture of Therapeutically Qualified Cells for Cell Therapy

Despite the great promise, cell therapy still faces practical challenges because of the scarcity of a reliable cell source. Herein, a bioinspired 3D dynamic culture system (CellMatrix) with rational structure, composite and function, was developed for improving cell supply. CellMatrix was composed of unique core-shell fibers with a core of black phosphorus-incorporated fibroin and a shell of sericin, which together formed a 3D silkworm cocoon-mimicking structure via a bottom-up fabrication technique. CellMatrix not only provided optimal engineered biomimetic niche to facilitate cell growth but exhibited good photothermal conversion to dynamically regulate cell fates. Importantly, cell-CellMatrix construct could be directly implanted into defected tissues and improved tissue remodeling. Meanwhile, CellMatrix displayed good ice resistance and thermal conductivity, which maximally maintained cell viability and proliferation after the freeze-thawing process, allowing for storing precious cells and cell-CellMatrix construct. Thus, CellMatrix represents an all-in-one biomimetic platform for the culture-production-storage of therapeutically qualified cells.

Effects of Biomimetic Micropatterned Surfaces on the Adhesion and Morphology of Cervical Cancer Cells

It has been demonstrated that micropatterned surfaces have an important influence on modulating cellular behavior. In recent years, with the rapid development of microfabrication techniques and in-depth study of nature, an increasing number of patterned structures imitating natural organisms have been successfully fabricated and widely evaluated. However, there are only a few reports about biomimetic patterned microstructures in biologically related fields. In our work, micropatterned polydimethylsiloxane (PDMS) was fabricated by mimicking the surface microstructures of natural Trifolium and Parthenocissus tricuspidata leaves using the template duplication method. The interactions between the two types of biomimetic micro-PDMS surfaces and two kinds of human cervical cancer cells (HeLa and SiHa) were investigated. HeLa and SiHa cells cultured on the two micropatterned PDMS samples exhibited more stretchable morphology, higher diffusion, and a much lower nuclear/cytoplasmic ratio than those cultured on flat PDMS surfaces, indicating a higher adhesion area of the cells. Both of the micro-PDMS substrates were found to induce significantly different morphological changes between HeLa and SiHa cells. This suggests that the micropatterned structure affects cell adhesion and morphology correlated with their surface geometric structure and roughness. The results reveal that biomimetic micropatterned surfaces from natural leaves significantly regulate the morphology and adhesion behavior of cervical cancer cells and are believed to be the new platforms for investigating the interaction between cells and substrates.

Conjugated Polymer-Functionalized Stretchable Supramolecular Hydrogels to Monitor and Control Cellular Behavior

Natural extracellular matrix is formed by the assembly of small molecules and macromolecules into a hydrogel-like network that can mechanically support cells and involve in cellular processes. Here, we developed a fluorescent supramolecular hydrogel based on a conjugated oligomer OFBTCO₂Na, which facilitated noncovalent assembly through hydrophobic interactions and hydrogen bonds in a molecular scale. The generated dense three-dimensional network endows the supramolecular hydrogel with stretchability and stability. Furthermore, fluorescent OFBTCO₂Na in hydrogel acted as a donor, which can excite the acceptor dyes on cells encapsulated in hydrogel via the Förster resonance energy transfer (FRET) mechanism. Investigating the fluorescence signal responsiveness of hydrogel to dynamic mechanical stretching well reflected that enhanced stretching dictated the extent of connection between the cell and matrix, which enables effective FRET at a molecular level and allow spatiotemporally monitoring cell-matrix interactions at the three-dimensional network. Importantly, cells can sense stretch forces by their connection with a hydrogel matrix. The dynamic cell-matrix interaction can be conveniently employed to formulate cell morphology. Therefore, the fluorescent supramolecular hydrogel offers a suitable culture platform not only to investigate cell interactions on interfaces but also to regulate cell behavior at interfaces.

Macrophage membrane-functionalized nanofibrous mats and their immunomodulatory effects on macrophage polarization

Immunomodulation is an important phenomenon in the normal mammalian host response toward an injury, and plays a critical role in tissue regeneration and regenerative medicine. Different phenotypes of macrophages show an array of activation states compassing pro-inflammatory to pro-alleviating cells, which are the critical players to modulate immune response and tissue regeneration. In this study, macrophage membranes of different phenotypes (macrophages (M0), classically activated macrophages (M1) and alternatively activated macrophages (M2)) were coated onto poly-ε-caprolactone (PCL) nanofibers to acquire exterior surface proteins and similar functions of the natural membranes. In vitro results unveiled that these nanofibers, especially the M2-PCL nanofibers, can suppress the activities of inflammatory markers such as TNF-α and IL-1β, and stimulate anti-inflammatory markers such as Arg-1, IL-10 and TGF-β. In a C57BL/6 mouse model, the macrophage membrane-coated nanofibers, especially the M2-PCL nanofibers, displayed minimal cellular infiltration and low collagen deposition, increased anti-inflammatory CD206 and decreased inflammatory CD86 levels. The M2-PCL nanofibers most effectively neutralized inflammatory chemokines, regulated the expression of inflammation-associated genes as well as anti-inflammatory genes, and showed strong immunomodulatory effects than the PCL, M0-PCL and M1-PCL nanofibers. STATEMENT OF SIGNIFICANCE: Different types of macrophage membrane-functionalized PCL nanofibers were successfully prepared and well characterized. They inherited the surface proteins imitating the source macrophages, and played an important role in limiting cellular infiltration and collagen deposition. These different macrophages and their membrane-coated nanofibers (M0-PCL, M1-PCL and M2-PCL) behaved like their respective source cells. The M2 mimicking M2-PCL nanofibers effectively polarized macrophages to M2 phenotype and decreased the expression of inflammation-associated chemokines and promoted the anti-inflammation in vitro and in vivo, which is critical for tissue regeneration. The mice implanted with the bio-mimicking M2-PCL nanofibers effectively inhibited toll like receptors signaling induced NF-kB and IRF-5 and their target genes such as Edn-1, IL-6, iNOS, TNF-α, etc. compared to the PCL, and M0-PCL and M1-PCL macrophage membrane-coated nanofibers.

A bone implant with NIR-responsiveness for eliminating osteosarcoma cells and promoting osteogenic differentiation of BMSCs

Incomplete removal of tumor cells and insufficient osseointegration are the main causes of bone tumor recurrence and implantation failure. In the present study, a multifunctional titanium-based bioactive implant for near-infrared-triggered synergy therapy to overcome these hurdles is engineered, composed of titanium dioxide (TiO₂) nanoparticles doped with fluorine (F)/dopamine (PDA)/collagen. The TiO₂ nanoparticles designed in this work can simultaneously exhibit excellent near-infrared-activated photothermal and photocatalytic properties. Besides, the layer designed in this work show excellent anti-tumor activity under irradiation with 808 nm light due to the synergetic effect of hyperthermia and reactive oxygen species (ROS), and Saos-2 cells can be eradicated within 10 min. Moreover, modification of PDA and collagen endue the Ti alloy excellent osteogenic activity.

Endowing Polyetheretherketone Implants with Osseointegration Properties: In Situ Construction of Patterned Nanorod Arrays

Polyetheretherketone (PEEK) is widely used in orthopedic and craniomaxillofacial surgeries as it exhibits excellent biocompatibility, mechanical property, and chemical stability. However, its clinical application is limited by the biological inertness of PEEK. Numerous efforts have been made to improve the bioactivity of this polymer over the years. However, modification methods that can not only promote osteogenesis but also maintain excellent properties are still limited. Hence, a facile hot die formation technique is developed for establishing patterned nanorod arrays on the PEEK surface in situ. This method can maintain the excellent properties of PEEK and can be used in implantation as it can facilitate osteogenic activity in the absence of any organic/inorganic differentiation-inducing factors. PEEK with 200-nm patterned nanorod arrays on the surface exhibits excellent osteogenic properties. This result is obtained by assessing the osteogenic differentiation properties of rat adipose-derived stem cells at the gene and protein levels in vitro. In vivo experimental results reveal that the surface-modified cylindrical PEEK 200 implants present with excellent osseointegration properties. Moreover, they can tightly bind with the surrounding bone tissue. A practical method for manufacturing single-component PEEK implants with excellent osseointegration properties is reported, and the materials can be possibly used as orthopedic implants.

Fabrication of Hollow Nanocones Membrane with an Extraordinary Surface Area as CO2 Sucker

Recently, more and more attention has been paid to the development of eco-friendly solid sorbents that are cost-effective, noncorrosive, have a high gas capacity, and have low renewable energy for CO₂ capture. Here, we claimed the fabrication of a three-dimensional (3D) film of hollow nanocones with a large surface area (949.5 m²/g), a large contact angle of 136.3°, and high surface energy. The synthetic technique is based on an electrochemical polymerization process followed by a novel and simple strategy for pulling off the formed layers as a membrane. Although the polymer-coated substrates were reported previously, the membrane formation has not been reported elsewhere. The detachable capability of the manufactured layer as a membrane braked the previous boundaries and allows the membrane’s uses in a wide range of applications. This 3D hollow nanocones membrane offer advantages over conventional ones in that they combine a π-electron-rich (aromatic ring), hydrophobicity, a large surface area, multiple amino groups, and a large pore volume. These substantial features are vital for CO₂ capturing and storage. Furthermore, the hydrophobicity characteristic and application of the formed polymer as a CO₂ sucker were investigated. These results demonstrated the potential of the synthesized 3D hollow polymer to be used for CO₂ capturing with a gas capacity of about 68 mg/g and regeneration ability without the need for heat up.

The Role of Dielectrophoresis for Cancer Diagnosis and Prognosis

Liquid biopsy is emerging as a potential diagnostic tool for prostate cancer (PC) prognosis and diagnosis. Unfortunately, most circulating tumor cells (CTC) technologies, such as AdnaTest or Cellsearch®, critically rely on the epithelial cell adhesion molecule (EpCAM) marker, limiting the possibility of detecting cancer stem-like cells (CSCs) and mesenchymal-like cells (EMT-CTCs) that are present during PC progression. In this context, dielectrophoresis (DEP) is an epCAM independent, label-free enrichment system that separates rare cells simply on the basis of their specific electrical properties. As compared to other technologies, DEP may represent a superior technique in terms of running costs, cell yield and specificity. However, because of its higher complexity, it still requires further technical as well as clinical development. DEP can be improved by the use of microfluid, nanostructured materials and fluoro-imaging to increase its potential applications. In the context of cancer, the usefulness of DEP lies in its capacity to detect CTCs in the bloodstream in their epithelial, mesenchymal, or epithelial-mesenchymal phenotype forms, which should be taken into account when choosing CTC enrichment and analysis methods for PC prognosis and diagnosis.

Digitally Driven Aerosol Jet Printing to Enable Customisable Neuronal Guidance

Digitally driven manufacturing technologies such as aerosol jet printing (AJP) can make a significant contribution to enabling new capabilities in the field of tissue engineering disease modeling and drug screening. AJP is an emerging non-contact and mask-less printing process which has distinct advantages over other patterning technologies as it offers versatile, high-resolution, direct-write deposition of a variety of materials on planar and non-planar surfaces. This research demonstrates the ability of AJP to print digitally controlled patterns that influence neuronal guidance. These consist of patterned poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) tracks on both glass and poly(potassium 3-sulfopropyl methacrylate) (PKSPMA) coated glass surfaces, promoting selective adhesion of SH-SY5Y neuroblastoma cells. The cell attractive patterns had a maximum height ≥0.2 μm, width and half height ≥15 μm, Ra = 3.5 nm, and RMS = 4.1. The developed biocompatible PEDOT:PSS ink was shown to promote adhesion, growth and differentiation of SH-SY5Y neuronal cells. SH-SY5Y cells cultured directly onto these features exhibited increased nuclei and neuronal alignment on both substrates. In addition, the cell adhesion to the substrate was selective when cultured onto the PKSPMA surfaces resulting in a highly organized neural pattern. This demonstrated the ability to rapidly and flexibly realize intricate and accurate cell patterns by a computer controlled process.

Biomimetic reduced graphene oxide coated collagen scaffold for in situ bone regeneration

A variety of bone-related diseases and injures and limitations of traditional regeneration methods require new tissue substitutes. Tissue engineering and regeneration combined with nanomedicine can provide different natural or synthetic and combined scaffolds with bone mimicking properties for implantation in the injured area. In this study, we synthesized collagen (Col) and reduced graphene oxide coated collagen (Col-rGO) scaffolds, and we evaluated their in vitro and in vivo effects on bone tissue repair. Col and Col-rGO scaffolds were synthesized by chemical crosslinking and freeze-drying methods. The surface topography, and the mechanical and chemical properties of scaffolds were characterized, showing three-dimensional (3D) porous scaffolds and successful coating of rGO on Col. The rGO coating enhanced the mechanical strength of Col-rGO scaffolds to a greater extent than Col scaffolds by 2.8 times. Furthermore, Col-rGO scaffolds confirmed that graphene addition induced no cytotoxic effects and enhanced the viability and proliferation of human bone marrow-derived mesenchymal stem cells (hBMSCs) with 3D adherence and expansion. Finally, scaffold implantation into rabbit cranial bone defects for 12 weeks showed increased bone formation, confirmed by Hematoxylin–Eosin (H&E) and alizarin red staining. Overall, the study showed that rGO coating improves Col scaffold properties and could be a promising implant for bone injuries.

Nanowire Assisted Mechanotyping of Cellular Metastatic Potential

Nanotechnology has provided tools for next generation biomedical devices which rely on nanostructure interfaces with living cells. In vitro biomimetic structures have enabled observation of cell response to various mechanical and chemical cues, and there is a growing interest in isolating and harnessing the specific cues that three-dimensional microenvironments can provide without the requirement for such culture and the experimental drawbacks associated with it. Here we report a randomly oriented gold coated Si nanowire substrate with patterned hydrophobic-hydrophilic areas for differentiation of isogenic breast cancer cells of varying metastatic potential. When considering synthetic surfaces for the study of cell-nanotopography interfaces, randomly oriented nanowires more closely resemble the isotropic architecture of natural extracellular matrix as compared to currently more widely used vertical nanowire arrays. In the study reported here, we show that primary cancer cells preferably attach to the hydrophilic region of randomly oriented nanowire substrate while secondary cancer cells do not adhere. Using machine learning analysis of fluorescence images, cells were found to spread and elongate on the nanowire substrates as compared to a flat substrate, where they mostly remain round, when neither surface was coated with extracellular matrix (ECM) proteins. Such platforms can not only be used for developing bioassays but also as stepping stones for tissue printing technologies where cells can be selectively patterned at desired locations.

Ruthenium-based Photoactive Metalloantibiotics†

Antibiotic resistance is one of the world's most urgent public health problems. Antimicrobial photodynamic therapy (aPDT) is a promising therapy to combat the growing threat of antibiotic resistance. The aPDT combines a photosensitizer and light to generate reactive oxygen species to induce bacterial inactivation. Ruthenium polypyridyl complexes are significant because they possess unique photophysical properties that allow them to produce reactive oxygen species upon photoirradiation, which leads to cytotoxicity. These antimicrobial agents cause bacterial cell death by DNA and cytoplasmic membrane damage. This article presents a comprehensive review of photoactive antimicrobial properties of kinetically inert and labile ruthenium complexes, nanoparticles coupled photoactive ruthenium complexes, and photoactive ruthenium nanoparticles. Additionally, limitations of current ruthenium-based photoactive antimicrobial agents and future directions for the development of antibiotic-resistant photoactive antimicrobial agents are discussed. It is important to raise awareness for the ruthenium-based aPDT agents in order to develop a new class of photoactive metalloantibiotics capable of combating antibiotic resistance.

3D Hierarchical Nanotopography for On-Site Rapid Capture and Sensitive Detection of Infectious Microbial Pathogens

Effective capture and rapid detection of pathogenic bacteria causing pandemic/epidemic diseases is an important task for global surveillance and prevention of human health threats. Here, we present an advanced approach for the on-site capture and detection of pathogenic bacteria through the combination of hierarchical nanostructures and a nuclease-responsive DNA probe. The specially designed hierarchical nanocilia and network structures on the pillar arrays, termed 3D bacterial capturing nanotopographical trap, exhibit excellent mechanical reliability and rapid (<30 s) and irreversible bacterial capturability. Moreover, the nuclease-responsive DNA probe enables the highly sensitive and extremely fast (<1 min) detection of bacteria. The bacterial capturing nanotopographical trap (b-CNT) facilitates the on-site capture and detection of notorious infectious pathogens (Escherichia coli O157:H7, Salmonella enteritidis, Staphylococcus aureus, and Bacillus cereus) from kitchen tools and food samples. Accordingly, the usefulness of the b-CNT is confirmed as a simple, fast, sensitive, portable, and robust on-site capture and detection tool for point-of-care testing.

Silver-coated silicon nanowire platform discriminates genomic DNA from normal and malignant human epithelial cells using label-free Raman spectroscopy

Genomic deoxyribonucleic acid (DNA) stores and carries the information required to maintain and replicate cellular life. While much efforts have been devoted in decoding the sequence of DNA basis to detect the genetic mutations related to cancer disease, it is becoming clear that physical properties, like structural conformation, stiffness and shape, can play an important role to recognize DNA modifications. Here, silver-coated silicon nanowires (Ag/SiNWs) are exploited as Raman spectroscopic platform to easily discriminate healthy and cancer genomic DNA, extracted from human normal skin and malignant melanoma cells, respectively. In particular, aqueous DNA droplets are directly deposited onto a forest of Ag/SiNWs and Raman maps are acquired after sample dehydration. By applying principal component analysis (PCA) to the Raman spectra collected within the droplets, healthy and cancer cell DNA can be distinguished without false negative identifications and with few false positive results (< 2%). The discrimination occurs regardless the analysis of specific DNA sequencing, but through Raman bands strictly related to the interfacing of the DNA and the NWs. The observed phenomenon can be ascribed to conformational differences and/or diverse charge properties between healthy and cancer cell DNA determining a different arrangement of the molecules adsorbed onto the NWs upon water evaporation. The unique interaction with DNA and facile fabrication technology make Ag/SiNWs an effective platform for a robust, rapid and label-free cancer diagnosis, as well as a potential tool to investigate physical properties of DNA.

Synergistic antibacterial activity of physical-chemical multi-mechanism by TiO2 nanorod arrays for safe biofilm eradication on implant

Treatment of implant-associated infection is becoming more challenging, especially when bacterial biofilms form on the surface of the implants. Developing multi-mechanism antibacterial methods to combat bacterial biofilm infections by the synergistic effects are superior to those based on single modality due to avoiding the adverse effects arising from the latter. In this work, TiO2 nanorod arrays in combination with irradiation with 808 near-infrared (NIR) light are proven to eradicate single specie biofilms by combining photothermal therapy, photodynamic therapy, and physical killing of bacteria. The TiO2 nanorod arrays possess efficient photothermal conversion ability and produce a small amount of reactive oxygen species (ROS). Physiologically, the combined actions of hyperthermia, ROS, and puncturing by nanorods give rise to excellent antibacterial properties on titanium requiring irradiation for only 15 min as demonstrated by our experiments conducted in vitro and in vivo. More importantly, bone biofilm infection is successfully treated efficiently by the synergistic antibacterial effects and at the same time, the TiO2 nanorod arrays improve the new bone formation around implants. In this protocol, besides the biocompatible TiO2 nanorod arrays, an extra photosensitizer is not needed and no other ions would be released. Our findings reveal a rapid bacteria-killing method based on the multiple synergetic antibacterial modalities with high biosafety that can be implemented in vivo and obviate the need for a second operation. The concept and antibacterial system described here have large clinical potential in orthopedic and dental applications.

Near-infrared light II - assisted rapid biofilm elimination platform for bone implants at mild temperature

Light-triggered therapy is a prospective method to combat implant-associated infection but near-infrared I (NIR-I) light has insufficient penetrating ability in tissues and local hyperthermia induced by the photothermal treatment may destroy surrounding healthy tissues. Herein, a near-infrared II (NIR-II) phototherapy system composed of upconversion elements doped titanium dioxide nanorods (TiO₂ NRs)/curcumin (Cur)/hyaluronic acid (HA)/bone morphogenetic protein-2 (BMP-2) is designed for biomedical titanium and demonstrated to overcome the above hurdles simultaneously. Incorporation of F, Yb, and Ho not only improves the photocatalytic ability, but also renders the implants with the upconversion capability, so that the NRs can generate enough reactive oxygen species (ROS) when irradiated by the NIR-II laser. Furthermore, the combined actions of quorum sensing inhibitors, ROS, and physical puncture by NRs eliminate Staphylococcus aureus biofilms on titanium rapidly at a mild temperature of 45 °C by only requiring irradiation with the 1060 nm laser for only 15 min in vitro and in vivo. The presence of Cur mitigates the immune response and BMP-2 improves osteogenic differentiation, thus accelerating new bone formation. This low-temperature NIR-II light-triggered antibacterial platform has large potential in combating deep-tissue infection in clinical applications.

A Reusable Column Method Using Glycopolymer-Functionalized Resins for Capture-Detection of Proteins and Escherichia coli

The use of glycopolymer-functionalized resins (Resin-Glc), as a solid support, in column mode for bacterial/protein capture and quantification is explored. The Resin-Glc is synthesized from commercially available chloromethylated polystyrene resin and glycopolymer, and is characterized by fourier transform infrared spectroscopy, thermogravimetry, and elemental analysis. The percentage of glycopolymer functionalized on Resin-Glc is accounted to be 5 wt%. The ability of Resin-Glc to selectively capture lectin, Concanavalin A, over Peanut Agglutinin, reversibly, is demonstrated for six cycles of experiments. The bacterial sequestration study using SYBR (Synergy Brands, Inc.) Green I tagged Escherichia coli/Staphylococcus aureus reveals the ability of Resin-Glc to selectively capture E. coli over S. aureus. The quantification of captured cells in the column is carried out by enzymatic colorimetric assay using methylumbelliferyl glucuronide as the substrate. The E. coli capture studies reveal a consistent capture efficiency of 10⁵  CFU (Colony Forming Units) g^-1 over six cycles. Studies with spiked tap water samples show satisfactory results for E. coli cell densities ranging from 10² to 10⁷  CFU mL^-1 . The method portrayed can serve as a basis for the development of a reusable solid support in capture and detection of proteins and bacteria.

Penetration mechanism of cells by vertical nanostructures

Cell penetration by high aspect-ratio vertical nanostructures such as nanowires and nanopillars provides a powerful method for accessing the cell interior for delivery and sensing. However, there is a lack of studies on the understanding of the mechanism of cell membrane penetration and how design nanostructures to optimize the efficiency of penetration remains unclear. Here, we propose an analytical model to elucidate the mechanism of cells penetration by analyzing the free-energy change of cells adhered to the nanostructures surface. Furthermore, we provide a simple method to evaluate the crossover radius or density for cell membrane penetration. By introducing a dimensionless parameter, i.e., adhesion area factor, we investigated the effects of the radius and distribution densities of nanostructures on cell membrane penetration which is determined by the competition between adhesion energy and deformation energy. Besides, a diagram of the distribution of cell penetration and no penetration is obtained. From the cell penetration diagram, one can determine easily and intuitively the relations of cell penetration state with the radius and distribution densities of nanostructures. Our theoretical results seem to show broad agreement with experimental observations, which implies that these studies would provide useful guidance to the design of nanopatterned surfaces for biomedical applications.

Field enhancement in microfluidic semiconductor nanowire array

Nano-material integrated microfluidic platforms are increasingly being considered to accelerate biological sample preparation and molecular diagnostics. A major challenge in this context is the generation of high electric fields for electroporation of cell membranes. In this paper, we have studied a novel mechanism of generating a high electric field in the microfluidic channels by using an array of semiconductor nanowires. When an electrostatic field is applied across a semiconductor nanowire array, the electric field is localized near the nanowires and the field strength is higher than what was reported previously with various other micro-geometries. Nanowires made of ZnO, Si, and Si-SiO₂ and their orientation and array spacing are considered design parameters. It is observed that for a given ratio of the spacing between nanowires to the diameter, the electric field enhancement near the edges of ZnO nanowires is nearly 30 times higher compared to Si or Si-SiO₂ nanowire arrays. This enhancement is a combined effect of the unique geometry with a pointed tip with a hexagonal cross section, the piezoelectric and the spontaneous polarization in the ZnO nanowires, and the electro-kinetics of the interface fluid. Considering the field localization phenomena, the trajectories of E. coli cells in the channel are analyzed. For a given inter-nanowire spacing and an applied electric field, the channels with ZnO nanowire arrays have a greater probability of cell lysis in comparison to Si-based nanowire arrays. Detailed correlations between the cell lysis probability with the inter-nanowire spacing and the applied electric field are reported.

Topographical regulation of stem cell differentiation by plant-derived micro/nanostructures

This study examines the osteogenic differentiation promotion effect of micro/nanostructures of raffia on human adipose-derived stem cells to confirm the potential application of plant-derived micro/nanotopographies in tissue regeneration. The results confirm that the nanorod array on the front surface and the honeycomb-like microstructure on the back surface of raffia can not only regulate the adhesion, spreading, and migration of stem cells but also promote the osteogenic differentiation of the stem cells at a subsequent stage of cell culture. The osteocalcin expressions by the 21-day cultured cells on the front and back surfaces of raffia were 55-fold and 36-fold higher compared to the expression on a tissue culture plate. This indicates that plant-derived micro/nanotopographies can significantly promote stem cell differentiation. Furthermore, a general strategy for the application of plant-derived materials to stem-cell differentiation and bone-tissue engineering is suggested.

Nanotechnology-Assisted Isolation and Analysis of Circulating Tumor Cells on Microfluidic Devices

Circulating tumor cells (CTCs), a type of cancer cell that spreads from primary tumors into human peripheral blood and are considered as a new biomarker of cancer liquid biopsy. It provides the direction for understanding the biology of cancer metastasis and progression. Isolation and analysis of CTCs offer the possibility for early cancer detection and dynamic prognosis monitoring. The extremely low quantity and high heterogeneity of CTCs are the major challenges for the application of CTCs in liquid biopsy. There have been significant research endeavors to develop efficient and reliable approaches to CTC isolation and analysis in the past few decades. With the advancement of microfabrication and nanomaterials, a variety of approaches have now emerged for CTC isolation and analysis on microfluidic platforms combined with nanotechnology. These new approaches show advantages in terms of cell capture efficiency, purity, detection sensitivity and specificity. This review focuses on recent progress in the field of nanotechnology-assisted microfluidics for CTC isolation and detection. Firstly, CTC isolation approaches using nanomaterial-based microfluidic devices are summarized and discussed. The different strategies for CTC release from the devices are specifically outlined. In addition, existing nanotechnology-assisted methods for CTC downstream analysis are summarized. Some perspectives are discussed on the challenges of current methods for CTC studies and promising research directions.

Vertical nanowire array-based biosensors: device design strategies and biomedical applications

Biosensors have been extensively studied in the areas of biology, electronics, chemistry, biotechnology, medicine, and various engineering fields. The interdisciplinarity creates an ideal platform for scientists to analyze biological species and chemical materials in a direct, efficient, and sensitive manner; this is expected to revolutionize the life sciences, basic medicine, and the healthcare industry. To carry out high-performance biosensing, nanoprobes - with specific nanoscale properties - have been proposed for ultrasensitive and in situ monitoring/detection of tracer biomolecules, cellular behavior, cellular microenvironments, and electrophysiological activity. Here, we review the development of vertical nanowire (VNW) array-based devices for the effective collection of biomedical information at the molecular level, extracellular level, and intracellular level. In particular, we summarize VNW-based technologies in the aspects of detecting biochemical information, cellular information, and bioelectrical information, all of which facilitate the understanding of fundamental biology and development of therapeutic techniques. Finally, we present a conclusion and prospects for the development of VNW platforms in practical biomedical applications, and we identify the challenges and opportunities for VNW-based biosensor systems in future biological research.

Surface-Mediated Intracellular Delivery by Physical Membrane Disruption

Effective and nondestructive intracellular delivery of exogenous molecules and other functional materials into living cells is of importance for diverse biological fundamental research and therapeutic applications, such as gene editing and cell-based therapies. However, for most exogenous molecules, the cell plasma membrane is effectively impermeable and thus remains the greatest barrier to intracellular delivery. In recent years, methods based on surface-mediated physical membrane disruption have attracted considerable attention. These methods exploit the physical properties of the surface to transiently increase the membrane permeability of cells come in contact thereto, thereby facilitating the efficient intracellular delivery of molecules regardless of molecule or target cell type. In this Review, we focus on recent progress, particularly over the past decade, on these surface-mediated membrane disruption-based delivery systems. According to the membrane disruption mechanism, three categories can be recognized: (i) mechanical penetration, (ii) electroporation, and (iii) photothermal poration. Each of these is discussed in turn and a brief perspective on future developments in this promising area is presented.

Molecular chirality mediated amyloid formation on phospholipid surfaces

One of the neuropathological features of Alzheimer's disease (AD) is the misfolding of amyloid-β to form amyloid aggregates, a process highly associated with biological membranes. However, how molecular chirality affects the amyloid formation on phospholipid surfaces has seldom been reported. Here, l- and d-aspartic acid-modified 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (l-/d-Asp–DPPE) is synthesized to construct chiral phospholipid bilayers. We discover that the l-Asp–DPPE liposomes slightly inhibit the Aβ(1–40) nucleation process but cannot affect the oligomer elongation process. By contrast, the d-Asp–DPPE liposomes strongly inhibit both nucleation and elongation of the peptide. Notably, l- and d-Asp–DPPE liposomes not only have good biocompatibility but can also rescue Aβ(1–40)-aggregation induced cytotoxicity with significant chiral discrimination, in which the cell viability is higher in the presence of d-Asp–DPPE liposomes. Mechanism analysis and molecular dynamics simulation clearly demonstrate that differential electrostatic interactions of Lys16 in Aβ(1–40) with l- or d-Asp on the phospholipid contribute to the remarkable chiral discrimination. This study provides a deeper understanding of the crucial amyloidosis process from the perspective of the chiral interface and reveals that the convergence of d-amino acids with the liposomes might be a feasible route for AD prevention.

A remarkable inhibition effect and chiral discrimination are observed when the amyloid peptide aggregates on chiral phospholipid surfaces.

Quantitative Analysis of Salmonella typhimurium Based on Elemental-Tags Laser-Induced Breakdown Spectroscopy

Current rapid bacterial detection methods are dedicated to the classification and identification of bacteria. However, there is still a lack of a method for specific quantitative analysis of certain bacteria. In this work, a method based on elemental-tags laser-induced breakdown spectroscopy (ETLIBS) was developed for the rapid and specific quantitative analysis of Salmonella typhimurium (S. ty). Elemental tags were first synthesized by assembling copper nanoparticles (CuNPs) with poly(thymine) (poly-T) template that linked with the aptamer sequence. Under the specific recognition of the aptamer, S. ty can be fully combined with the elemental tags within 30 min to achieve labeling. Afterward, the silicon nanowires (SiNWs) array modified with Au@Ag nanoparticles (SiNWs-Au@Ag) was employed to capture S. ty in 30 min. Attributed to the rapid analysis superiority of ETLIBS mapping, 100 spectra of SiNWs-Au@Ag/S. ty/CuNPs can be obtained in 5 min. It was found that the peak area of the Cu(I) atomic emission line at 324.75 nm fitted by the Voigt profile was linearly related to the bacterial concentration in the range of 10²-10⁶ CFU/mL(R² = 0.978). Furthermore, ETLIBS mapping achieved a low limit of detection (LOD) of 61 CFU/mL and showed good selectivity to S. ty compared with other bacteria. Besides, the method exhibited preeminent detection performance in spiked samples with the recoveries of 87-113%. With the advantages of rapidity, high efficiency, and specificity, the proposed method is expected to be a powerful tool for bacterial detection.