Ionic liquid solutions as extractive solvents for value-added compounds from biomass

Comparative analysis of extraction technologies for plant extracts and absolutes

Plant extracts and absolutes have high application value in several industries such as medicine, food, and fragrance. Especially in the field of fragrance, while there is expensive, they are prized by perfumers and provide a rich and lasting aroma. Owing to advancements in extraction technology, their yields have increased and their ingredients have become richer. However, no extraction technology is universal and each extraction technology has its own distinct advantages and disadvantages. Therefore, this review systematically characterizes the extraction technologies for plant extracts and absolutes, including traditional extraction technologies, such as maceration, percolation, reflux, and Soxhlet extraction, and green extraction technologies, such as microwave-assisted, ultrasonic-assisted, pressurized liquid, and supercritical fluid extractions. These extraction technologies are analyzed and compared in terms of their principles, advantages and disadvantages, improvement solutions, and applications. In addition, this review summarizes and compares new green extraction solvents and discusses the practical applications of these advanced extraction methods and solvents from different perspectives.

Extraction of curcuminoids from Curcuma longa L. by fatty acid-based ionic liquid aqueous solution: Experimental and mechanism study

Curcuminoids originated from the plant Curcuma longa L. show high medical values. Herein, ionic liquids (ILs) were synthesized using fatty acids and alcohol amines to extract curcuminoids. Through single-factor experiments and response surface methodology (RSM) optimization, the extraction amount of curcuminoids by [TEA][FA-C7] aqueous solution reached 34.89 mg/g at a liquid-solid ratio of 16.36 mg/g and an extraction temperature of 36 °C, surpassing that of methanol. The extraction capacity of [TEA][FA-C7] to curcuminoids was 299.33 mg/g. Furthermore, the separation of extracts and recovery of fatty acids were studied. Quantum chemical calculations and molecular dynamics simulations were performed to investigate the extraction mechanism profoundly. This study not only proposed a novel green solvent for the extraction of curcuminoids from the plant Curcuma longa L. but also provided the possibility of applying fatty acid-based ILs to extract natural medicine efficiently.

Efficient and Selective Extraction of Prenylated Flavonoids from Sophora flavescens Using Ultrasound-Assisted Hydrophobic Ionic Liquid and Characterization of Extraction Mechanism

As a secondary metabolite with vigorous pharmacological activity (antitumor), prenylated flavonoids in Sophora flavescens (PFS) have great potential to be transformed into lead compounds. Its extraction has attracted more and more attention. Conventional organic solutions cannot selectively extract PFS and then need to carry out liquid-liquid extraction and multi-step column separation, which is time-consuming and pollutes the environment. This study found that [C8mim]BF4 had a high efficiency and selectivity for extracting PFS. Under the optimal extraction parameters, the yield of PFS was 7.38 mg/g. Based on UHPLC-Q-Orbitrap MS, 39 prenylated flavonoids were identified in PFS freeze-dried powder, which showed strong anti-tumor activity. In addition, the potential mechanism of selective extraction was analyzed in depth. [C8mim]BF4 synergy ultrasound destroys the cell wall structure, making the active components in the cell more easily exposed to the extraction solvent. The formation of more hydrogen bonds and van der Waals forces between [C8mim]BF4 and PFS accelerates the dissolution of PFS.

Structure and dynamics of piperidinium based amino acid ionic liquids: a computational investigation

CONTEXT

There has been growing interest in amino acid ionic liquids because of their low-cost synthesis and superior biodegradability and biocompatibility compared to traditional ionic liquids. In this study, we have investigated the structure and dynamics of three ionic liquids consisting of N-butyl N-methyl piperidinium [Pip] cation with amino acid (lysine [Lys], histidine [His], and arginine [Arg]) anions. The radial distribution functions, the spatial distribution functions, and the coordination numbers have been used to analyze the structure in the bulk phase. The time-correlation functions for hydrogen bonds, ion pairs, and ion cage formation have been calculated to analyze the dynamic properties. The hydrogen bonds found between the ion pairs are mostly electrostatically dominant with moderate to weaker strengths. The [Pip][His] system showed the strongest interaction energy between the ion pairs, while the [Pip][Lys] system demonstrated faster dynamics consistent with its higher diffusion and ion conductivity.

METHOD

The density functional theory at M06-2X/6-311 + + G(d,p) level was employed for geometry optimization and wave function calculations. The theory of atoms-in-molecule was used for the topological analysis of electron density. The classical molecular dynamics simulations with OPLS-AA force field were employed to study the dynamics of the systems.

Current advances in phytosterol free forms and esters: Classification, biosynthesis, chemistry, and detection

Phytosterols are plant sterols that are important secondary plant metabolites with significant pharmacological properties. Their presence in the plant kingdom concerns many unrelated botanical families such as oleageneous plants and cereals. The structures of phytosterols evoke those of cholesterol. These molecules are composed of a sterane ring, also known as perhydrocyclopentanophenanthrene, along with a methyl or ethyl group at C-24 in their side chains, a hydroxyl group at C-3 on ring A, and one or two double bonds in the B ring. Phytosterols display different oxidation degrees at the sterane ring and at the side chain as well as varying numbers of carbons with complex stereochemistries. Fats and water solubilities of phytosterols have been achieved by physical, chemical and enzymatic esterifications to favor their bioavailability and to improve the sensory quality of food, and the efficiency of pharmaceutic and cosmetic products. This review aims to provide comprehensive information starting from the definition and structural classification of phytosterols, and exposes an update of their biogenic relationships. Next, the synthesis of phytosterol esters and their applications as well as their effective roles as hormone precursors are discussed. Finally, a concise exploration of the latest advancements in phytosterol / oxyphytosterols analysis techniques is provided, with a particular focus on modern hyphenated techniques.

Subcellular effects of imidazolium-based ionic liquids with varying anions on the marine bivalve Mytilus galloprovincialis

Green Chemistry involves applying a set of principles aimed at minimizing the use of hazardous substances in the design, production, and application of chemical products. In recent decades, Ionic Liquids (ILs) have emerged as more environmentally friendly substitutes for traditional organic solvents. This preference is primarily due to their low vapor pressure, which results in minimal atmospheric pollution and enhanced industrial safety. However, existing literature highlights the toxicity of ILs towards aquatic invertebrates. Consequently, this study points to assess the biochemical effects of a selection of ILs through an in vitro approach. Specifically, digestive gland and gill cellular fractions (S9) of the marine bivalve Mytilus galloprovincialis were exposed to varying concentrations (0.05-2 μM) of three ILs featuring identical cations but different anions. The ILs tested were 1-ethyl-3-methylimidazolium octanoate ([EMIM][Oct]), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), and 1-ethyl-3-methylimidazolium ethyl sulfate ([EMIM][EtSO4]). The results indicate that [EMIM][Oct] induces higher toxicity in both S9 tissues, highlighting a strong effect of the anion. Overall, antioxidant and biotransformation defenses were significantly altered for all three ILs assessed. While acetylcholinesterase activity was significantly inhibited of about half of control activity, indicating neurotoxic damage as part of the toxicity mode of action of these ILs, neither lipid peroxidation nor alterations to DNA integrity were observed (≥100 %). This study supports the use of in vitro techniques as important tools capable of generating reliable ecotoxicological data, which can be further considered as a screening before in vivo testing and used for in silico modeling.

Monte Carlo QM/MM simulation studies of the Cannizzaro reaction in ionic liquids for improved biofuel production

The conversion of biomass to 5-hydroxymethylfurfural (HMF) holds substantial promise as a renewable energy source. Notably, HMF can be transformed into 2,5-bis(hydroxymethyl)furan (BHMF), a crucial reactant in biofuel production, but requires harsh operating conditions, H2, and precious metal catalysts. A recently reported Cannizzaro reaction of HMF to BHMF, characterized by its efficiency, mild conditions, and eco-friendliness, instead employed ionic liquids (ILs) to achieve high yields. In this study, combined quantum mechanical and molecular mechanical (QM/MM) simulations in conjunction with Metropolis Monte Carlo statistical mechanics and free-energy perturbation theory utilized M06-2X/6-31+G(d), PDDG/PM3, and the OPLS-VSIL force field to uncover important solute-solvent interactions present in the HMF to BHMF reaction pathway. The Cannizzaro reaction was examined in water and in five ILs composed of the 1-butyl-3-methylimidazolium [BMIM] cation coupled to hexafluorophosphate, tetrafluoroborate, thiocyanate, chloride, and bromide. Energetic and structural analysis of the rate-determining hydride transfer between HMF and the hydride-donor anion HMFOH- attributed the enhanced reactivity to highly organized solvent interactions featuring (1) hydrogen bonding between the ring protons of [BMIM] and the negatively charged carbonyl oxygen atoms on the transition structure, (2) favorable electrostatic interactions between the IL anions and solute hydroxyl groups, and (3) beneficial π-π stacking interactions between [BMIM] and the two aromatic rings present in HMF and HMFOH-.

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

Double charge flips of polyamide membrane by ionic liquid-decoupled bulk and interfacial diffusion for on-demand nanofiltration

Fine design of surface charge properties of polyamide membranes is crucial for selective ionic and molecular sieving. Traditional membranes face limitations due to their inherent negative charge and limited charge modification range. Herein, we report a facile ionic liquid-decoupled bulk/interfacial diffusion strategy to elaborate the double charge flips of polyamide membranes, enabling on-demand transformation from inherently negative to highly positive and near-neutral charges. The key to these flips lies in the meticulous utilization of ionic liquid that decouples intertwined bulk/interfacial diffusion, enhancing interfacial while inhibiting bulk diffusion. These charge-tunable polyamide membranes can be customized for impressive separation performance, for example, profound Cl-/SO42- selectivity above 470 in sulfate recovery, ultrahigh Li+/Mg2+ selectivity up to 68 in lithium extraction, and effective divalent ion removal in pharmaceutical purification, surpassing many reported polyamide nanofiltration membranes. This advancement adds a new dimension to in the design of advanced polymer membranes via interfacial polymerization.

Fish By-Product Collagen Extraction Using Different Methods and Their Application

The processing of fishery resources results in the production of a growing quantity of byproducts, including heads, skins, viscera, intestines, frames, and fillet cutoffs. These byproducts are either wasted or utilized for the production of low-value items and fish oil. Typically, fish processing industries use only 25%, while the remaining 75% is considered as waste by-products. This review presents a comprehensive review on the extraction of collagen from fish byproducts, highlighting numerous techniques including acid-soluble collagen (ASC), enzyme-soluble collagen (ESC), ultrasound extraction, deep eutectic solvent (DES) extraction, and supercritical fluid extraction (SFE). A detailed explanation of various extraction parameters such as time, temperature, solid to liquid (S/L) ratio, and solvent/pepsin concentration is provided, which needs to be considered to optimize the collagen yield. Moreover, this review extends its focus to a detailed investigation of fish collagen applications in the biomedical sector, food sector, and in cosmetics. The comprehensive review explaining the extraction methods, extraction parameters, and the diverse applications of fish collagen provides a basis for the complete understanding of the potential of fish-derived collagen. The review concludes with a discussion of the current research and a perspective on the future development in this research field.

In vitro screening of imidazolium and pyrrolidinium based ionic liquids toxicity on subcellular fractions of the Mediterranean mussel Mytilus galloprovincialis

Ionic liquids (ILs) have been considered eco-friendly alternatives to conventional organic solvents. However, several studies have reported that ILs exert toxicity towards aquatic invertebrates. Applying in vitro methodology, the aim of the present study was to evaluate the potential effect of three ILs on the biochemical performance of exposed Mytilus galloprovincialis digestive gland and gills cellular fractions. Carboxylesterase might be involved in the derived toxicity mechanism of ILs as activity levels increased significantly in digestive gland exposed fractions. This group of ILs did not seem to induce genotoxicity, except in gills cellular fractions exposed to 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. In the literature, in vitro methodology has been suggested as an important complement to animal testing and in silico studies. The present research underlines its efficacy as a quick pre-screening before in vivo testing, particularly with heterogenic groups of substances with high variability in composition, such as ILs and deep eutectic solvents.

Ionic liquids revolutionizing biomedicine: recent advances and emerging opportunities

Ionic liquids (ILs), due to their inherent structural tunability, outstanding miscibility behavior, and excellent electrochemical properties, have attracted significant research attention in the biomedical field. As the application of ILs in biomedicine is a rapidly emerging field, there is still a need for systematic analyses and summaries to further advance their development. This review presents a comprehensive survey on the utilization of ILs in the biomedical field. It specifically emphasizes the diverse structures and properties of ILs with their relevance in various biomedical applications. Subsequently, we summarize the mechanisms of ILs as potential drug candidates, exploring their effects on various organisms ranging from cell membranes to organelles, proteins, and nucleic acids. Furthermore, the application of ILs as extractants and catalysts in pharmaceutical engineering is introduced. In addition, we thoroughly review and analyze the applications of ILs in disease diagnosis and delivery systems. By offering an extensive analysis of recent research, our objective is to inspire new ideas and pathways for the design of innovative biomedical technologies based on ILs.

Various Extraction Techniques of Curcumin-A Comprehensive Review

Curcumin, the active component of the rhizome of Curcuma longa, is a safe substance whose applications are extensively used in medicinal, biological, pharmacological activities, and food cosmetic additives. In the field of medicine, curcuminoids have a greater impact; they have been associated with the suppression of neuropathic pain, depression, angiogenesis, tumorigenesis, diabetes, and diseases of the liver, skin, and pulmonary systems, as well as cardiovascular and nervous systems. These are in high demand and have high market potential and inflated costs. For the aforementioned uses, as well as for basic research, it is crucial to get pure curcumin from plant sources. There is a need for effective extraction and purification techniques that adhere to standards for process efficiency, environmental friendliness, and safety. Scope: This account offers an accurate and thorough explanation of the many techniques used to extract and purify curcumin from plant sources, as well as a look at its various roles in the pharmaceutical, cosmetic, medical, and other industries. Curcumin's prospective and commercial roles are also discussed. Key findings: Curcuminoids have been extracted and purified by using a broad range of techniques that are utilized extensively across the world. Extraction of curcuminoids includes both traditional and contemporary approaches, of which a handful include Soxhlet extraction, maceration, solvent extraction, ultrasound-assisted extraction, microwave-assisted extraction, enzyme-assisted extraction, and supercritical liquid extraction. The other process called purification can be performed alone or in combination with techniques. The use of column chromatography and semipreparative high-performance liquid chromatography are examples of traditional purification procedures, and other innovative methods include high-speed counter-current chromatography and supercritical fluid chromatography.

Ionic liquid-based ultrasonic-assisted extraction coupled with HPLC to analyze isoquercitrin, trifolin and afzelin in Amygdalus persica L. flowers

This study aimed to establish a method for the simultaneous determination of isoquercitrin, trifolin and afzelin in A. persica flowers by high performance liquid chromatography (HPLC) with ionic liquid as extractant and ultrasonic-assisted extraction. The effects of ionic liquid concentration, solid-liquid ratio, number of crushing mesh, ultrasonic time, extraction temperature, and ultrasonic power on the extraction yield of three target compounds were investigated using the extraction yield of target analytes as the index. According to the results of single factor experiment, the Box-Behnken design-response surface methodology (BBD) was used to optimize the extraction method and compared with the traditional extraction method. The results showed that, calibration curves had excellent linearity (R2 > 0.9990) within the test ranges. In combination with other validation data, this method demonstrated good reliability and sensitivity, and can be conveniently used for the quantification of isoquercitrin, trifolin and afzelinin A. persica flowers. And the contents of isoquercitrin, trifolin and afzelin were 64.08, 20.55 and 75.63 μg/g, respectively. The optimal process obtained by BBD was as follows: ionic liquid concentration was 1.0 mol/L, solid-liquid ratio was 1:40 g/ml, mesh sieve was 50 mesh, ultrasonic time was 40 min, extraction temperature was 50 °C, and ultrasonic power was 400 W. Under the optimal conditions, the theoretical predicted total extraction yield of the three target compounds was 159.77 μg/g, which was close to the actual extraction value (160.26 μg/g, n = 3), this result indicating that the optimal process parameters obtained by response surface methodology analysis were accurate and reliable. The method was simple, accurate and rapid for determination the contents of three active ingredients in A. persica flowers.

Biocompatible and Biodegradable Surfactants from Orange Peel for Oil Spill Remediation

Oil spill remediation plays a vital role in mitigating the environmental impacts caused by oil spills. The chemical method is one of the widely recognized approaches in chemical surfactants. However, the most commonly used chemical surfactants are toxic and non-biodegradable. Herein, two biocompatible and biodegradable surfactants were synthesized from orange peel using the ionic liquid 1-butyl-3-methylimidazolium chloride (BMIMCl) and organic solvent dimethylacetamide (CH3CN(CH3)2) as reaction media. The acronyms SOPIL and SOPOS refer to the surfactants prepared with BMIMCl and dimethylacetamide, respectively. The surface tension, dispersant effectiveness, optical microscopy, and emulsion stability test were conducted to examine the comparative performance of the synthesized surfactants. The Baffled flask test (BFT) was carried out to determine the dispersion effectiveness. The toxicity test was performed against zebrafish (Danio rerio), whereas the closed bottle test (CBT) evaluated biodegradability. The results revealed that the critical micelle concentration (CMC) value of SOPIL was lower (8.57 mg/L) than that of SOPOS (9.42 mg/L). The dispersion effectiveness values for SOPIL and SOPOS were 69.78% and 40.30%, respectively. The acute toxicity test demonstrated that SOPIL was 'practically non-toxic' with a median lethal concentration of more than 1000 mg/L after 96 h. The biodegradation rate was recorded as higher than 60% for both surfactants within 28 days, demonstrating their readily biodegradable nature. Considering these attributes, biocompatible and biodegradable surfactants derived from orange peel emerge as a promising and sustainable alternative for oil spill remediation.

Closing the Nutrient Loop-The New Approaches to Recovering Biomass Minerals during the Biorefinery Processes

The recovery of plant mineral nutrients from the bio-based value chains is essential for a sustainable, circular bioeconomy, wherein resources are (re)used sustainably. The widest used approach is to recover plant nutrients on the last stage of biomass utilization processes-e.g., from ash, wastewater, or anaerobic digestate. The best approach is to recover mineral nutrients from the initial stages of biomass biorefinery, especially during biomass pre-treatments. Our paper aims to evaluate the nutrient recovery solutions from a trans-sectorial perspective, including biomass processing and the agricultural use of recovered nutrients. Several solutions integrated with the biomass pre-treatment stage, such as leaching/bioleaching, recovery from pre-treatment neoteric solvents, ionic liquids (ILs), and deep eutectic solvents (DESs) or integrated with hydrothermal treatments are discussed. Reducing mineral contents on silicon, phosphorus, and nitrogen biomass before the core biorefinery processes improves processability and yield and reduces corrosion and fouling effects. The recovered minerals are used as bio-based fertilizers or as silica-based plant biostimulants, with economic and environmental benefits.

Silica-Based Supported Ionic Liquid-like Phases as Heterogeneous Catalysts

Supported ionic liquid phases offer several advantages related with catalysis. Immobilization of ionic liquid on the solid support provides catalytic activity or efficient matrix for active phases, as enzymes or metal compounds. Ionic liquid can be physically adsorbed on the carrier (supported ionic liquid phase) or chemically grafted to the material surface (supported ionic liquid-like phase). The use of supported ionic liquid phases improves mass transport, reduces ionic amount in the process and, most importantly, enables effortless catalyst separation and recycling. Moreover, chemical modification of the surface material with ionic liquid prevents its leaching, enhancing length of catalyst life. Silica-based materials have become an effective and powerful matrix for supported ionic liquid-like phase due to its cost-efficiency, presence of hydroxyl groups on the surface enabling its functionalization, and specific material properties, such as the size and shapes of the pores. For these reasons, supported ionic liquid-like phase silica-based materials are successfully used in the organic catalysis.

The Practical Utility of Imidazolium Hydrogen Sulfate Ionic Liquid in Fabrication of Lignin-Based Spheres: Structure Characteristic and Antibacterial Activity

In this study, lignin-based spherical particles (Lig-IL) with the use of 1-(propoxymethyl)-1H-imidazolium hydrogen sulfate were prepared in different biopolymer and ionic liquid (IL) weight ratios. The application of IL during the preparation of spherical particles is an innovative method, which may be beneficial for further applications. The particles were obtained with the use of the soft-templating method and their chemical, structural and morphological characterization was performed. The spherical shape of products and their size (91–615 nm) was confirmed with the use of scanning electron microscopy (SEM) images and the particle size distribution results. The attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra were analyzed to identify functional groups of all precursors and produced material and it was confirmed, that all materials exhibit characteristic hydroxyl and carboxylic groups, but the presence of carbonyl group was detected. Moreover, the zeta potential analysis was performed to evaluate the electrokinetic behavior of obtained materials. It was confirmed, that all materials are colloidally stable in pH above 4. Produced lignin-based spherical particles were used for evaluation of their antibacterial properties. Particles were tested against Staphylococcus aureus (S. aureus), a gram-positive bacterium, and Escherichia coli (E. coli), a gram-negative one. It was observed, that only the material with the highest addition of IL showed the antibacterial properties against both strains. A reduction of 50% in the number of microorganisms was observed for particles with the addition of hydrogen sulfate ionic liquid in a 1:1 ratio after 1 h. However, all prepared materials exhibited the antibacterial activity against a gram-positive bacterium.

Bio-Refinery of Oilseeds: Oil Extraction, Secondary Metabolites Separation towards Protein Meal Valorisation—A Review

Edible oil extraction is a large and well-developed sector based on solvent assisted extraction using volatile organic compounds such as hexane. The extraction of oil from oilseeds generates large volumes of oilseed by-products rich in proteins, fibres, minerals and secondary metabolites that can be valued. This work reviews the current status and the bio-macro-composition of oilseeds, namely soybean, rapeseed, sunflower and flaxseed, and the refining process, comprising the extraction of oil, the valorisation and separation of valuable secondary metabolites such as phenolic compounds, and the removal of anti-nutritional factors such as glucosinolates, while retaining the protein in the oilseed meal. It also provides an overview of alternative solvents and some of the unconventional processes used as a replacement to the conventional extraction of edible oil, as well as the solvents used for the extraction of secondary metabolites and anti-nutritional factors. These biologically active compounds, including oils, are primordial raw materials for several industries such as food, pharmaceutical or cosmetics.

Carotenoid Production from Microalgae: The Portuguese Scenario

Microalgae have an outstanding capacity to efficiently produce value-added compounds. They have been inspiring researchers worldwide to develop a blue biorefinery, supporting the development of the bioeconomy, tackling the environmental crisis, and mitigating the depletion of natural resources. In this review, the characteristics of the carotenoids produced by microalgae are presented and the downstream processes developed to recover and purify them are analyzed, considering their main applications. The ongoing activities and initiatives taking place in Portugal regarding not only research, but also industrialization under the blue biorefinery concept are also discussed. The situation reported here shows that new techniques must be developed to make microalgae production more competitive. Downstream pigment purification technologies must be developed as they may have a considerable impact on the economic viability of the process. Government incentives are needed to encourage a constructive interaction between academics and businesses in order to develop a biorefinery that focuses on high-grade chemicals.

Recent Advances on Ionic Liquid Uses in Separation Techniques

Ionic liquids (ILs) are non-molecular solvents; specifically, molten salts with low melting points, often below 100 °C and even below room temperature, thus allowing these solvents to remain liquid [...]

Liquid- and Solid-based Separations Employing Ionic Liquids for the Recovery of Platinum Group Metals Typically Encountered in Catalytic Converters: A Review

The wide application range and ascending demand for platinum group metals combined with the progressive depletion of their natural resources renders their efficient recycling a very important and pressing matter. Primarily environmental considerations associated with state-of-the-art recovery processes have shifted the focus of the scientific community toward the investigation of alternative recycling approaches. Within this context, ionic liquids have gained considerable attention in the last two decades chiefly sparked by properties such as tunabilty, low-volatility, and relatively easy recyclability. In this review an understanding of the state-of-the-art processes, including their drawbacks and limitations, is provided. The core of the discussion is focused on platinum group metal recovery with ionic liquid-based systems. A brief insight in some environmental considerations related to ionic liquids is also provided while some discussion on research gaps, common misconceptions related to ionic liquids and outlook on unresolved issues could not be absent from this review.

Biodegradable Solvents: A Promising Tool to Recover Proteins from Microalgae

The world will face a significant protein demand in the next few decades, and due to the environmental concerns linked to animal protein, new sustainable protein sources must be found. In this regard, microalgae stand as an outstanding high-quality protein source. However, different steps are needed to separate the proteins from the microalgae biomass and other biocompounds. The protein recovery from the disrupted biomass is usually the bottleneck of the process, and it typically employs organic solvents or harsh conditions, which are both detrimental to protein stability and planet health. Different techniques and methods are applied for protein recovery from various matrices, such as precipitation, filtration, chromatography, electrophoresis, and solvent extraction. Those methods will be reviewed in this work, discussing their advantages, drawbacks, and applicability to the microalgae biorefinery process. Special attention will be paid to solvent extraction performed with ionic liquids (ILs) and deep eutectic solvents (DESs), which stand as promising solvents to perform efficient protein separations with reduced environmental costs compared to classical alternatives. Finally, several solvent recovery options will be analyzed to reuse the solvent employed and isolate the proteins from the solvent phase.

Aqueous Biphasic Systems Comprising Natural Organic Acid-Derived Ionic Liquids

Despite the progress achieved by aqueous biphasic systems (ABSs) comprising ionic liquids (ILs) in extracting valuable proteins, the quest for bio-based and protein-friendly ILs continues. To address this need, this work uses natural organic acids as precursors in the synthesis of four ILs, namely tetrabutylammonium formate ([N4444][HCOO]), tetrabutylammonium acetate ([N4444][CH3COO]), tetrabutylphosphonium formate ([P4444][HCOO]), and tetrabutylphosphonium acetate ([P4444][CH3COO]). It is shown that ABSs can be prepared using all four organic acid-derived ILs paired with the salts potassium phosphate dibasic (K2HPO4) and tripotassium citrate (C6H5K3O7). According to the ABSs phase diagrams, [P4444]-based ILs outperform their ammonium congeners in their ability to undergo liquid–liquid demixing in the presence of salts due to their lower hydrogen-bond acidity. However, deviations to the Hofmeister series were detected in the salts’ effect, which may be related to the high charge density of the studied IL anions. As a proof of concept for their extraction potential, these ABSs were evaluated in extracting human transferrin, allowing extraction efficiencies of 100% and recovery yields ranging between 86 and 100%. To further disclose the molecular-level mechanisms behind the extraction of human transferrin, molecular docking studies were performed. Overall, the salting-out exerted by the salt is the main mechanism responsible for the complete extraction of human transferrin toward the IL-rich phase, whereas the recovery yield and protein-friendly nature of these systems depend on specific “IL-transferrin” interactions.

Evaluation of miscanthus pretreatment effect by Choline chloride based Deep Eutectic solvents on bioethanol production

This work evaluates the efficiency of three deep eutectic solvents constituted of choline chloride and urea or glycerol or ethylene glycol in the pretreatment of the miscanthus in view of extracting cellulose. Analysis of experiments shows that basicity and polarity of the hydrogen bond donor of these DESs are directly related to the miscanthus solubility. The best efficient process was found using {Choline chloride/glycerol} mixture for the pretreatment at a temperature of 373 K and a duration of about 6 h. This may be explained by the fact that {Choline chloride/glycerol} pretreatment allows to obtain an amorphous cellulose. {Choline chloride/glycerol} was as efficiently as IL pretreatments with an ethanol production of about 72%. This study shows that Choline chloride based DESs pretreatment for biomass could be a key point to enhance the efficiency of biorefinery.

Mimic Nature Using Chemotaxis of Ionic Liquid Microdroplets for Drug Delivery Purposes

Due to the growing prevalence of incurable diseases, such as cancer, worldwide, nowadays, the development of smart drug delivery systems is an inevitable necessity. Chemotaxis-driven movement of ionic liquid microdroplets containing therapeutic compounds is a well-known example of a smart drug delivery system. This review aims to classify, summarize, and compare ionic liquid-based chemotaxis systems in an easily understandable article. Chemotaxis is the basis of the movement of cells and microorganisms in biological environments, which is the cause of many vital biochemical and biological processes. This review attempts to summarize the available literature on single-component biomimetic and self-propelling microdroplet systems based on ionic liquids, which exhibit chemotaxis and spontaneously move in a determined direction by an external gradient, particularly a chemical change. It also aims to review artificial ionic liquid-based chemotaxis systems that can be used as drug carriers for medical purposes. The various ionic liquids used for this purpose are discussed, and different forms of chemical gradients and mechanisms that cause movement in microfluidic channels will be reviewed.

Chemical compositions and bioactivities of essential oil from perilla leaf (Perillae Folium) obtained by ultrasonic-assisted hydro-distillation with natural deep eutectic solvents

Natural deep eutectic solvents (NADESs) have received considerable attention for green extraction. In this study, ultrasonic-assisted natural deep eutectics were applied for hydrodistillation to extract essential oil from perilla leaves. Compared to hydrodistillation assisted with ultrasound, this novel method effectively raised the yield of perilla leaf EO from 0.21% to 0.69% (choline chloride: malic acid, molar ratio 2:1) and broadened the types of chemical compositions (71 in total), especially aliphatic and aromatic compounds. Stronger antimicrobial and antioxidant activity was confirmed, and phenolics were increased. Additionally, the pH of the final solution was detected. The leaf residues were dried, weighed and analyzed by scanning electron microscopy to show the influence of NADESs' strong extractability. This new extraction method may be applicable in edible natural product extraction and provide a reference for further exploration of NADESs.

Integrated strategies for enzyme assisted extraction of bioactive molecules: A review

Conventional methods of extracting bioactive molecules are gradually losing pace due to their numerous disadvantages, such as product degradation, lower efficiency, and toxicity. Thus, in light of the rising demand for these bioactive, enzymes have garnered much attention for their efficiency in extraction. However, enzyme-assisted extraction is also plagued with a high capital cost that cannot justify the extraction yields obtained. In order to mitigate these problems, enzyme-assisted extraction can be consorted with non-conventional methods. This review includes current progress concerning the combined approaches while converging the recent advancements in the field that outperformed conventional extraction processes. It also highlights the design of biocatalyst and key parameters involved in the effective extraction of bioactive molecules. An integrated approach for efficiently extracting polyphenols, essential oils, pigments, and vitamins has been comprehensively reviewed. Furthermore, the different immobilization strategies have been discussed for large-scale implementation of enzymes for extraction. The integration of advanced non-conventional methods with enzyme-assisted extraction will open new avenues to enhance the overall extraction efficiency.

A Combined Deep Eutectic Solvent-Ionic Liquid Process for the Extraction and Separation of Platinum Group Metals (Pt, Pd, Rh)

Recovery of platinum group metals from spent materials is becoming increasingly relevant due to the high value of these metals and their progressive depletion. In recent years, there is an increased interest in developing alternative and more environmentally benign processes for the recovery of platinum group metals, in line with the increased focus on a sustainable future. To this end, ionic liquids are increasingly investigated as promising candidates that can replace state-of-the-art approaches. Specifically, phosphonium-based ionic liquids have been extensively investigated for the extraction and separation of platinum group metals. In this paper, we present the extraction capacity of several phosphonium-based ionic liquids for platinum group metals from model deep eutectic solvent-based acidic solutions. The most promising candidates, P66614Cl and P66614B2EHP, which exhibited the ability to extract Pt, Pd, and Rh quantitively from a mixed model solution, were additionally evaluated for their capacity to recover these metals from a spent car catalyst previously leached into a choline-based deep eutectic solvent. Specifically, P66614Cl afforded extraction of the three target precious metals from the leachate, while their partial separation from the interfering Al was also achieved since a significant amount (approx. 80%) remained in the leachate.

Engineering encapsulated ionic liquids for next-generation applications

Ionic liquids (ILs) have attracted considerable attention in several sectors (from energy storage to catalysis, from drug delivery to separation media) owing to their attractive properties, such as high thermal stability, wide electrochemical window, and high ionic conductivity. However, their high viscosity and surface tension compared to conventional organic solvents can lead to unfavorable transport properties. To circumvent undesired kinetics effects limiting mass transfer, the discretization of ILs into small droplets has been proposed as a method to increase the effective surface area and the rates of mass transfer. In the present review paper, we summarize the different methods developed so far for encapsulating ILs in organic or inorganic shells and highlight characteristic features of each approach, while outlining potential applications. The remarkable tunability of ILs, which derives from the high number of anions and cations currently available as well as their permutations, combines with the possibility of tailoring the composition, size, dispersity, and properties (e.g., mechanical, transport) of the shell to provide a toolbox for rationally designing encapsulated ILs for next-generation applications, including carbon capture, energy storage devices, waste handling, and microreactors. We conclude this review with an outlook on potential applications that could benefit from the possibility of encapsulating ILs in organic and inorganic shells.

Encapsulated ionic liquids (ILs) are candidate materials for several applications owing to the attractive properties of ILs combined with the enhanced mass transfer rate obtained through the discretization of ILs in small capsules.

An Efficient Ionic Liquid-Mediated Extraction and Enrichment of Isoimperatorin from Ostericum koreanum (Max.) Kitagawa

Ionic liquids (ILs) have attracted significant interest because of their desirable properties. These characteristics have improved their application to overcome the shortcomings of conventional separation techniques for phytochemicals. In this study, several ILs were investigated for their capacity to extract isoimperatorin, a bioactive furanocoumarin, from the roots of Ostericum koreanum. Herein, 1-Butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) was selected as a promising IL for separating isoimperatorin. A central composite design was applied to optimize the extraction conditions. Under the optimal conditions, the yield of isoimperatorin reached 97.17 ± 1.84%. Additionally, the recovery of isoimperatorin from the [Bmim][BF4] solution was successfully achieved (87.73 ± 2.37%) by crystallization using water as an antisolvent. The purity of the isoimperatorin was greatly enhanced, from 0.26 ± 0.28% in the raw material to 26.94 ± 1.26% in the product, in a one-step crystallization process. Namely, an enhancement of approximately 103-folds was reached. The developed approach overcomes the shortcomings of conventional separation methods applied for gaining isoimperatorin by significantly reducing the laboriousness of the process and the consumption of volatile organic solvents. Moreover, the simplicity and effectiveness of the method are assumed to be valuable for producing isoimperatorin-enriched products and for promoting its purification. This work also confirms the efficiency of ILs as a promising material for the separation of phytochemicals.

Advances Brought by Hydrophilic Ionic Liquids in Fields Involving Pharmaceuticals

The negligible volatility and high tunable nature of ionic liquids (ILs) have been the main drivers of their investigation in a wide diversity of fields, among which is their application in areas involving pharmaceuticals. Although most literature dealing with ILs is still majorly devoted to hydrophobic ILs, evidence on the potential of hydrophilic ILs have been increasingly provided in the past decade, viz., ILs with improved therapeutic efficiency and bioavailability, ILs with the ability to increase drugs' aqueous solubility, ILs with enhanced extraction performance for pharmaceuticals when employed in biphasic systems and other techniques, and ILs displaying low eco/cyto/toxicity and beneficial biological activities. Given their relevance, it is here overviewed the applications of hydrophilic ILs in fields involving pharmaceuticals, particularly focusing on achievements and advances witnessed during the last decade. The application of hydrophilic ILs within fields involving pharmaceuticals is here critically discussed according to four categories: (i) to improve pharmaceuticals solubility, envisioning improved bioavailability; (ii) as IL-based drug delivery systems; (iii) as pretreatment techniques to improve analytical methods performance dealing with pharmaceuticals, and (iv) in the recovery and purification of pharmaceuticals using IL-based systems. Key factors in the selection of appropriate ILs are identified. Insights and perspectives to bring renewed and effective solutions involving ILs able to compete with current commercial technologies are finally provided.

Extraction and Stabilization of Betalains from Beetroot (Beta vulgaris) Wastes Using Deep Eutectic Solvents

Deep eutectic solvents (DES) using magnesium chloride hexahydrate [MgCl₂·6H₂O] and urea [U] proportions (1:1) and (2:1), were prepared for their use as extracting and stabilizer agents for red and violet betalains from beetroot (Beta vulgaris) waste. The synthetized DES [MgCl₂·6H₂O] [U] showed similar properties to eutectic mixtures, such as, liquid phase, low melting points and conductivity, thermal stability, and variable viscosity. In turn, betalain DES extracts (2:1) exhibited compatibility in the extraction and recovery of betalains from beetroot wastes, showing a betalain content comparable to that of betalain extracts. Betalain stability was determined by degradation tests; the exposure conditions were visible light (12 h), molecular oxygen from atmospheric air and environmental temperature (20–27 °C) for 40 days. The kinetic curves of the betalain degradation of water samples depicted a first-order model, indicating the alteration of a violet colouration of betalains from beetroot waste for 5–7 days. However, betalains from DES extracts were kept under visible light for 150 days, and for 340 days in storage (amber vessels), achieving a stability of 75% in comparison with initial beet extracts.

Conversion of inulin-rich raw plant biomass to 2,5-furandicarboxylic acid (FDCA): Progress and challenge towards biorenewable plastics

The current commercial plastic manufactures have been produced using petroleum-based resource. However, due to concerns over the resource depletion and the environmental sustainability, bioresource-based manufacturing processes have been developed to cope against these concerns. Bioresource-derived 2,5-furandicarboxylic acid (FDCA) can be utilized as a building block material for plastic manufactures. To date, numerous technologies have been developed for the production of FDCA using various types of bio-based feedstocks such as hydroxymethylfurfural (HMF), 6-C sugars, and polysaccharides. The commercial companies produce FDCA using HMF-based production processes due to their high production efficiency, but the high price of HMF is a problem bottleneck. Our review affords important information on breakthrough approaches for the cost-efficient and sustainable production of FDCA using raw plant feedstocks rich in inulin. These approaches include bioprocessing technology based on the direct use of raw plant feedstocks and biomodification of the target plant sources. For the former, an ionic liquid-based processing system is proposed for efficient pretreatment of raw plant feedstocks. For the latter, the genes encoding the key enzymes; sucrose:sucrose 1-fructoyltransferase (1-SST), fructan:fructan 1-fryuctosyltransferase (1-FFT), fructan 1-exohydrolase (1-FEH), and microbe-derived endoinulinase, are introduced for biomodification conducive to facilitating bioprocess and improving inulin content. These approaches would contribute to cost-efficiently and sustainably producing bio-based FDCA.

Molecular Interactions of Diphenhydramine-hydrochloride with Some Imidazolium-Based Ionic Liquids in Aqueous Media at T = 293.15-313.15 K: Volumetric, Acoustic, and UV Absorption Studies

From the density (ρ) and speed-of-sound (u) measurements, the interactions of the drug diphenhydramine-hydrochloride (DPH) with three imidazolium-based ionic liquids (ILs) (1-butyl-3-methylimidazolium chloride, [C₄mim][Cl], 1-hexyl-3-methylimidazolium chloride1, [C₆mim][Cl], and 1-methyl-3-octylimidazolium chloride, [C₈mim][Cl]) have been investigated in aqueous medium at T = 293.15-313.15 K and experimental pressure p = 0.1 MPa. From the density calculations, the apparent molar volume (V _ϕ) and the apparent partial molar volumes of transfer (Δ _t V _ϕ ^o) have been determined for various solutions of DPH in aqueous solutions of different ILs. In addition, from the speed-of-sound data, the apparent molar isentropic compressibility (K _ϕ), apparent partial molar isentropic compressibility (K _ϕ ^o), and apparent partial molar isentropic compressibility of transfer (Δ _tK_ϕ ^ο ) have been calculated. The pair and triplet interaction coefficients are derived from apparent partial molar volumes of transfer. For the present mixtures, the absorption spectra have been also recorded using a UV-visible spectrophotometer. Using Hepler's constant, the structure-making nature of the solute has been confirmed. All these calculated parameters provide detailed insights into various physicochemical interactions prevailing in the ternary system and confirm the presence of a strong attractive interaction between DPH and ILs.

Emerging Green Techniques for the Extraction of Antioxidants from Agri-Food By-Products as Promising Ingredients for the Food Industry

Nowadays, the food industry is heavily involved in searching for green sources of valuable compounds, to be employed as potential food ingredients, to cater to the evolving consumers’ requirements for health-beneficial food ingredients. In this frame, agri-food by-products represent a low-cost source of natural bioactive compounds, including antioxidants. However, to effectively recover these intracellular compounds, it is necessary to reduce the mass transfer resistances represented by the cellular envelope, within which they are localized, to enhance their extractability. To this purpose, emerging extraction technologies, have been proposed, including Supercritical Fluid Extraction, Microwave-Assisted Extraction, Ultrasound-Assisted Extraction, High-Pressure Homogenization, Pulsed Electric Fields, High Voltage Electrical Discharges. These technologies demonstrated to be a sustainable alternative to conventional extraction, showing the potential to increase the extraction yield, decrease the extraction time and solvent consumption. Additionally, in green extraction processes, also the contribution of solvent selection, as well as environmental and economic aspects, represent a key factor. Therefore, this review focused on critically analyzing the main findings on the synergistic effect of low environmental impact technologies and green solvents towards the green extraction of antioxidants from food by-products, by discussing the main associated advantages and drawbacks, and the criteria of selection for process sustainability.