Interplay of physical mechanisms and biofilm processes: review of microfluidic methods

Current examining methods and mathematical models of horizontal transfer of antibiotic resistance genes in the environment

The increasing prevalence of antibiotic resistance genes (ARGs) in the environment has garnered significant attention due to their health risk to human beings. Horizontal gene transfer (HGT) is considered as an important way for ARG dissemination. There are four general routes of HGT, including conjugation, transformation, transduction and vesiduction. Selection of appropriate examining methods is crucial for comprehensively understanding characteristics and mechanisms of different HGT ways. Moreover, combined with the results obtained from different experimental methods, mathematical models could be established and serve as a powerful tool for predicting ARG transfer dynamics and frequencies. However, current reviews of HGT for ARG spread mainly focus on its influencing factors and mechanisms, overlooking the important roles of examining methods and models. This review, therefore, delineated four pathways of HGT, summarized the strengths and limitations of current examining methods, and provided a comprehensive summing-up of mathematical models pertaining to three main HGT ways of conjugation, transformation and transduction. Finally, deficiencies in current studies were discussed, and proposed the future perspectives to better understand and assess the risks of ARG dissemination through HGT.

Lactobacillus reuteri biofilms formed on porous zein/cellulose scaffolds: Synbiotics to regulate intestinal microbiota

Supplementing probiotics or indigestible carbohydrates is a usual strategy to prevent or revert unhealthy states of the gut by reshaping gut microbiota. One criterion that probiotics are efficacious is the capacity to survive in the gastrointestinal tract. Biofilm is the common growth mode of microorganisms with high tolerances toward harsh environments. Suitable scaffolds are crucial for successful biofilm culture and large-scale production of biofilm-phenotype probiotics. However, the role of scaffolds containing indigestible carbohydrates in biofilm formation has not been studied. In this study, porous zein/cellulose composite scaffolds provided nitrogen sources and carbon sources simultaneously at the solid/liquid interfaces, being beneficial to the biofilm formation of Lactobacillus reuteri. The biofilms showed 2.1-17.4 times higher tolerances in different gastrointestinal conditions. In human fecal fermentation, the biofilms combined with the zein/cellulose composite scaffolds act as the "synbiotics" positively modulating the gut microbiota and the short-chain fatty acids (SCFAs), where biofilms provide probiotics and scaffolds provide prebiotics. The "synbiotics" show a more positive regulation ability than planktonic L. reuteri, presenting potential applications in gut health interventions. These results provide an understanding of the synergistic effects of biofilm-phenotype probiotics and indigestible carbohydrates contained in the "synbiotics" in gut microbiota modulation.

A versatile micromodel technology to explore biofilm development in porous media flows

Bacterial biofilms that grow in porous media are critical to ecosystem processes and applications ranging from soil bioremediation to bioreactors for treating wastewater or producing value-added products. However, understanding and engineering the complex phenomena that drive the development of biofilms in such systems remains a challenge. Here we present a novel micromodel technology to explore bacterial biofilm development in porous media flows. The technology consists of a set of modules that can be combined as required for any given experiment and conveniently tuned for specific requirements. The core module is a 3D-printed micromodel where biofilm is grown into a perfusable porous substrate. High-precision additive manufacturing, in particular stereolithography, is used to fabricate porous scaffolds with precisely controlled architectures integrating flow channels with diameters down to several hundreds of micrometers. The system is instrumented with: ultraviolet-C light-emitting diodes; on-line measurements of oxygen consumption and pressure drop across the porous medium; camera and spectrophotometric cells for the detection of biofilm detachment events at the outlet. We demonstrate how this technology can be used to study the development of Pseudomonas aeruginosa biofilm for several days within a network of flow channels. We find complex dynamics whereby oxygen consumption reaches a steady-state but not the pressure drop, which instead features a permanent regime with large fluctuations. We further use X-ray computed microtomography to image the spatial distribution of biofilms and computational fluid dynamics to link biofilm development with local flow properties. By combining the advantages of additive manufacturing for the creation of reproducible 3D porous microarchitectures with the flow control and instrumentation accuracy of microfluidics, our system provides a platform to study the dynamics of biofilm development in 3D porous media and to rapidly test new concepts in process engineering.

Observations on phenomenological changes in Klebsiella Pneumoniae under fluidic stresses

In the present work, experiments are conducted to understand the consequence of stresses generated by flowing fluid on the bacterial morphology and virulence in microfluidic channels. We consider Klebsiella pneumoniae (KP, a clinical isolate), an ESKAPE pathogen, to be the model bacteria responsible for blood stream infections, bacteremia, including pneumonia, urinary tract infections and more. Four different stress conditions are generated by changing the flow rate and channel geometry subsequently altering the shear rate and stressing time (τ). We observe significant changes in the structural aspects of the stressed bacteria. With an increase in stressing parameters, the viability of the bacterial sample deteriorated. Most importantly, these stressed samples proliferate much more than unstressed samples inside the RAW264.7 murine macrophages. The results shed light on the complex relationship between flow stresses and bacterial virulence. Furthermore, the bacterial samples are challenged with ciprofloxacin to see how they behave under different stress conditions. The observations presented in the present study can be extended to model deadly diseases including bacteremia using organ-on-a-chip technology and to understand bacterial pathogenicity under realistic environments.

Plants and endophytes interaction: a "secret wedlock" for sustainable biosynthesis of pharmaceutically important secondary metabolites

Many plants possess immense pharmacological properties because of the presence of various therapeutic bioactive secondary metabolites that are of great importance in many pharmaceutical industries. Therefore, to strike a balance between meeting industry demands and conserving natural habitats, medicinal plants are being cultivated on a large scale. However, to enhance the yield and simultaneously manage the various pest infestations, agrochemicals are being routinely used that have a detrimental impact on the whole ecosystem, ranging from biodiversity loss to water pollution, soil degradation, nutrient imbalance and enormous health hazards to both consumers and agricultural workers. To address the challenges, biological eco-friendly alternatives are being looked upon with high hopes where endophytes pitch in as key players due to their tight association with the host plants. The intricate interplay between plants and endophytic microorganisms has emerged as a captivating subject of scientific investigation, with profound implications for the sustainable biosynthesis of pharmaceutically important secondary metabolites. This review delves into the hidden world of the "secret wedlock" between plants and endophytes, elucidating their multifaceted interactions that underpin the synthesis of bioactive compounds with medicinal significance in their plant hosts. Here, we briefly review endophytic diversity association with medicinal plants and highlight the potential role of core endomicrobiome. We also propose that successful implementation of in situ microbiome manipulation through high-end techniques can pave the way towards a more sustainable and pharmaceutically enriched future.

Challenges and current advances in in vitro biofilm characterization

Biofilms are structured communities of bacterial cells encased in a self-produced polymeric matrix, which develop over time and exhibit temporal responses to stimuli from internal biological processes or external environmental changes. They can be detrimental, threatening public health and causing economic loss, while they also play beneficial roles in ecosystem health, biotechnology processes, and industrial settings. Biofilms express extreme heterogeneity in their physical properties and structural composition, resulting in critical challenges in understanding them comprehensively. The lack of detailed knowledge of biofilms and their phenotypes has deterred significant progress in developing strategies to control their negative impacts and take advantage of their beneficial applications. A range of in vitro models and characterization tools have been developed and used to study biofilm growth and, specifically, to investigate the impact of environmental and growth factors on their development. This review article discusses the existing knowledge of biofilm properties and explains how external factors, such as flow condition, surface, interface, and host factor, may impact biofilm growth. The limitations of current tools, techniques, and in vitro models that are currently used for biofilms are also presented.

Application of filter media surface hydrophobic modification to reduce bioclogging in the infiltration system

Bioclogging is a commonly encountered operational issue that lowers hydraulic conductivity and the overall performance of the infiltration systems. In this paper, a novel processing for alleviating bioclogging by filter media surface hydrophobic modification was presented. Two-dimensional porous media cells were used to observe the influence of hydrophobic modification on biofilm growth in the pore structure. Moreover, two continuous-flow columns packed with gravel, one of which half gravel was hydrophobically modified, were operated with artificial wastewater to verify the effect of hydrophobic modification on bioclogging alleviation. The results showed that the biofilm growth in the cell with hydrophobic modification was slow, and the biomass was less and liable to wipe off after hydrophobic treatment. Meanwhile, the hydraulic efficiency of the flow seepage field was also improved after hydrophobic treatment. The column tests results showed that the hydraulic conductivity of the filter bed with hydrophobic modification (Column B) decreased more slowly than that of another without hydrophobic modification (Column A). Column B had the hydraulic conductivity (k) of 0.66 cm/s in the final stage of the experiment, while the k of Column A was 0.14 cm/s. It verified that hydrophobic modification of partial filter media can alleviate the bioclogging problem of the infiltration systems to some extent. The results provide a new idea and potential technical support for solving bioclogging problem.

Inhibitory Potential of Thymus vulgaris Essential Oil against Growth, Biofilm Formation, Swarming, and Swimming in Pseudomonas syringae Isolates

As a follow-up to previous studies, the effects of Thymus vulgaris essential oil on selected virulence factors (growth, sessile cell survival, swimming, swarming, and exopolysaccharide production) were evaluated in phytopathogenic Pseudomonas syringae strains isolated from soybean fields in Argentina; reference strains Pseudomonas savastanoi pv. glycinea B076 and Pseudomonas aeruginosa PAO1. P. syringae are responsible for bacterial blight, a disease that affects crops worldwide. Plant bacterioses are usually treated with antibiotics and copper compounds, which may contribute to the development of resistance in pathogens and damage the environment. For these reasons, eco-friendly alternatives are necessary. Although aromatic plants are a natural source of antimicrobial substances, the effects of these substances on phytopathogenic bacteria remain largely unexplored. Subinhibitory concentrations of the oil significantly reduced the slope and rate of bacterial growth. In addition, biofilm and exopolysaccharide (EPS) production were inhibited, with swimming and swarming motility patterns being affected at all of the oil concentrations tested. Therefore, TEO could potentially be a highly efficient antipseudomonal agent for treating plant infections caused by P. syringae.

Microfluidic techniques for mechanical measurements of biological samples

The use of microfluidics to make mechanical property measurements is increasingly common. Fabrication of microfluidic devices has enabled various types of flow control and sensor integration at micrometer length scales to interrogate biological materials. For rheological measurements of biofluids, the small length scales are well suited to reach high rates, and measurements can be made on droplet-sized samples. The control of flow fields, constrictions, and external fields can be used in microfluidics to make mechanical measurements of individual bioparticle properties, often at high sampling rates for high-throughput measurements. Microfluidics also enables the measurement of bio-surfaces, such as the elasticity and permeability properties of layers of cells cultured in microfluidic devices. Recent progress on these topics is reviewed, and future directions are discussed.

Drug delivery approaches for enhanced antibiofilm therapy

Biofilms have attracted increasing attention in recent years. Many bacterial infections are associated with biofilm formation. A bacterial biofilm is an aggregated membrane-like substance that is composed of a large number of bacteria and their secreted extracellular polymeric substances. The traditional antibiofilm approaches, such as chemotherapy based on antibiotics, are often ineffective in eradicating biofilms owing to the limited diffusion ability of antibiotics within biofilms and inactivation of antibiotics by biofilms. Moreover, a larger dosage of antibiotics could be effective, but leads to an increased tolerance. Smart drug delivery systems that deliver antibiotics into the biofilm interior is a promising strategy to meet this challenge. In this review, we focus on the methods to improve drug delivery efficiency for enhanced chemotherapy of biofilms. Furthermore, we have summarized chemical approaches for enhanced drug delivery, such as chemical shields, charge reversal, and dual corona enhanced delivery strategies; these methods focus on physicochemical biofilm properties and specific biofilm features. Afterwards, physical approaches are discussed, such as magnetism-mediated drug delivery, electricity-mediated drug delivery, ultrasound-mediated drug delivery, and shock wave-mediated drug delivery. Finally, a perspective on the development of next-generation antibiofilm drug delivery systems is given.

Molecular characterization and biofilm-formation analysis of Listeria monocytogenes, Salmonella spp., and Escherichia coli isolated from Brazilian swine slaughterhouses

This study aimed to verify the presence of Listeria monocytogenes, Salmonella spp., and Escherichia coli in two Brazilian swine slaughterhouses, as well as to perform antibiograms, detect virulence and antimicrobial resistance genes, and evaluate the in vitro biofilm-forming capability of bacterial isolates from these environments. One Salmonella Typhi isolate and 21 E. coli isolates were detected, while L. monocytogenes was not detected. S. Typhi was isolated from the carcass cooling chamber’s floor, resistant to several antimicrobials, including nalidixic acid, cefazolin, chloramphenicol, doxycycline, streptomycin, gentamicin, tetracycline, and sulfonamide, and contained resistance genes, such as tet(B), tet(C), tet(M), and ampC. It also showed moderate biofilm-forming capacity at 37°C after incubating for 72 h. The prevalence of the 21 E. coli isolates was also the highest on the carcass cooling chamber floor (three of the four samplings [75%]). The E. coli isolates were resistant to 12 of the 13 tested antimicrobials, and none showed sensitivity to chloramphenicol, an antimicrobial prohibited in animal feed since 2003 in Brazil. The resistance genes MCR-1, MCR-3, sul1, ampC, clmA, cat1, tet(A), tet(B), and blaSHV, as well as the virulence genes stx-1, hlyA, eae, tir α, tir β, tir γ, and saa were detected in the E. coli isolates. Moreover, 5 (23.8%) and 15 (71.4%) E. coli isolates presented strong and moderate biofilm-forming capacity, respectively. In general, the biofilm-forming capacity increased after incubating for 72 h at 10°C. The biofilm-forming capacity was the lowest after incubating for 24 h at 37°C. Due to the presence of resistance and virulence genes, multi-antimicrobial resistance, and biofilm-forming capacity, the results of this study suggest a risk to the public health as these pathogens are associated with foodborne diseases, which emphasizes the hazard of resistance gene propagation in the environment.

Early biofilm and streamer formation is mediated by wall shear stress and surface wettability: A multifactorial microfluidic study

Biofilms are intricate communities of microorganisms encapsulated within a self‐produced matrix of extra‐polymeric substances (EPS), creating complex three‐dimensional structures allowing for liquid and nutrient transport through them. These aggregations offer constituent microorganisms enhanced protection from environmental stimuli—like fluid flow—and are also associated with higher resistance to antimicrobial compounds, providing a persistent cause of concern in numerous sectors like the marine (biofouling and aquaculture), medical (infections and antimicrobial resistance), dentistry (plaque on teeth), food safety, as well as causing energy loss and corrosion. Recent studies have demonstrated that biofilms interact with microplastics, often influencing their pathway to higher trophic levels. Previous research has shown that initial bacterial attachment is affected by surface properties. Using a microfluidic flow cell, we have investigated the relationship between both wall shear stress (τ_w) and surface properties (surface wettability) upon biofilm formation of two species (Cobetia marina and Pseudomonas aeruginosa). We investigated biofilm development on low‐density polyethylene (LDPE) membranes, Permanox® slides, and glass slides, using nucleic acid staining and end‐point confocal laser scanning microscopy. The results show that flow conditions affect biomass, maximum thickness, and surface area of biofilms, with higher τ_w (5.6 Pa) resulting in thinner biofilms than lower τ_w (0.2 Pa). In addition, we observed differences in biofilm development across the surfaces tested, with LDPE typically demonstrating more overall biofilm in comparison to Permanox® and glass. Moreover, we demonstrate the formation of biofilm streamers under laminar flow conditions within straight micro‐channels.

Nutrient starvation intensifies chlorine disinfection-stressed biofilm formation

Bacterial surface attachment and subsequent biofilm expansion represent an essential adaptation to environmental signals and stresses, which are of great concern for many natural and engineered ecosystems. Yet the underlying mechanisms and driving forces of biofilm formation in a chlorinated and nutrient-restricted system remain sketchy. In this study, we coupled an experimental investigation and modeling simulation to understand how chlorination and nutrient limitation conspire to form biofilm using Pseudomonas aeruginosa as a model bacterium. Experimental results showed that moderate chlorination at 1.0 mg/L led to biofilm development amplified to 2.6 times of those without chlorine, while additional nutrient limitation (of 1/50-diluted or 0.4 g/L LB broth culture) achieved 4.6 times increment as compared to those of undiluted scenarios (of 20 g/L LB broth culture) with absence of chlorination after 24 h exposure. Meanwhile, intermediate chlorination stimulated instant flagellar motility and subsequently extracellular polymeric substances (EPS) secretion, particularly under limited nutrient condition (of 1/50-diluted or 0.4 g/L LB broth culture) that retarded chlorine consumption and provoked bacterial nutrient-limitation response. From our simulations, chlorine and resource levels along with associated spatio-temporal variations collectively drove bacterial cell movement and EPS excretion. Our results demonstrated that restraining nutrient intensified chlorination-excited cell movement and EPS production that reinforced biological and cell-surface interactions, thereby encouraging bacterial surface attachment and subsequent biofilm development. The findings provide the insights into the linkage of disinfectant and nutrient-regulated bacterial functional responses with consequent micro-habitats and biofilm dynamics.

In situ continuous electrochemical quantification of bacterial adhesion to electrically polarized metallic surfaces under shear

Biofouling creates significant human and economic losses through infections, corrosion, and drag losses on ships and in oil and food distribution pipelines. Organisms adhered to these surfaces contend with high shear rates and are actively transported to the surface. The metallic surfaces to which these organisms are adhered also conduct charge at various potentials, and the effects of surface charge on adhesion rates are little addressed in the literature. We demonstrate that mass-transport limiting current, chronoamperometry, and cyclic voltammetry can be combined to provide resulting adhesion rates similar to those in the literature. Furthermore, we demonstrate that rotating disk electrodes can be used to study adhesion of bacteria to electrically polarized metallic surfaces under shear. We study the adhesion of Escherichia coli, Bacillus subtilis, and 1μm silica microspheres over a range of shear stress from 0.15 to 37  dyncm^-2 or shear rates of 14.7-3730  s^-1. Unlike quartz-crystal microbalance, our methodology measures changes in the area instead of mass, simultaneously providing measurements of the protein binding. Our deposition rates agree with those found using optical systems. However, unlike optical systems, our methods apply to a wider range of materials than on-chip flow devices.

Effects of emerging pollutants on the occurrence and transfer of antibiotic resistance genes: A review

The emergence and spread of antibiotic resistance genes (ARGs) have become major concerns for both public health and environmental ecosystems. Emerging pollutants (EPs) that accumulate in environmental compartments also pose a potential risk for the enrichment of ARGs in indigenous microorganisms. This paper presents a comprehensive review of the effects and intrinsic mechanisms of EPs, including microplastics, engineered nanomaterials, disinfection byproducts, pharmaceuticals, and personal care products, on the occurrence and dissemination of ARGs. State-of-the-art methods for identifying culture-independent ARG-host interactions and monitoring horizontal gene transfer (HGT) processes in real-time are first reviewed. The contributions of EPs to the abundance and diversity of ARGs are then summarized. Finally, we discussed the underlying mechanisms related to the regulation of HGT, increased mutagenesis, and the evolution of microbial communities. Further details of three HGT (i.e., conjugation, transformation, and transduction) frequency patterns in response to various EPs are also examined. This review contemplates and reassesses the risks of ARG evolution posed by the manufacture and application of EPs.

Bacterial streamers as colloidal systems: Five grand challenges

Bacteria can thrive in biofilms, which are intricately organized communities with cells encased in a self-secreted matrix of extracellular polymeric substances (EPS). Imposed hydrodynamic stresses can transform this active colloidal dispersion of bacteria and EPS into slender thread-like entities called streamers. In this perspective article, the reader is introduced to the world of such deformable 'bacteria-EPS' composites that are a subclass of the generic flow-induced colloidal structures. While bacterial streamers have been shown to form in a variety of hydrodynamic conditions (turbulent and creeping flows), its abiotic analogues have only been demonstrated in low Reynolds number (Re < 1) particle-laden polymeric flows. Streamers are relevant to a variety of situations ranging from natural formations in caves and river beds to clogging of biomedical devices and filtration membranes. A critical review of the relevant biophysical aspects of streamer formation phenomena and unique attributes of its material behavior are distilled to unveil five grand scientific challenges. The coupling between colloidal hydrodynamics, device geometry and streamer formation are highlighted.

Engineering aligned human cardiac muscle using developmentally inspired fibronectin micropatterns

Cardiac two-dimensional tissues were engineered using biomimetic micropatterns based on the fibronectin-rich extracellular matrix (ECM) of the embryonic heart. The goal of this developmentally-inspired, in vitro approach was to identify cell-cell and cell-ECM interactions in the microenvironment of the early 4-chambered vertebrate heart that drive cardiomyocyte organization and alignment. To test this, biomimetic micropatterns based on confocal imaging of fibronectin in embryonic chick myocardium were created and compared to control micropatterns designed with 2 or 20 µm wide fibronectin lines. Results show that embryonic chick cardiomyocytes have a unique density-dependent alignment on the biomimetic micropattern that is mediated in part by N-cadherin, suggesting that both cell-cell and cell-ECM interactions play an important role in the formation of aligned myocardium. Human induced pluripotent stem cell-derived cardiomyocytes also showed density-dependent alignment on the biomimetic micropattern but were overall less well organized. Interestingly, the addition of human adult cardiac fibroblasts and conditioning with T3 hormone were both shown to increase human cardiomyocyte alignment. In total, these results show that cardiomyocyte maturation state, cardiomyocyte-cardiomyocyte and cardiomyocyte-fibroblast interactions, and cardiomyocyte-ECM interactions can all play a role when engineering anisotropic cardiac tissues in vitro and provides insight as to how these factors may influence cardiogenesis in vivo.

Biofilms vs. cities and humans vs. aliens - a tale of reproducibility in biofilms

Biofilms are complex and dynamic structures that include many more components than just viable cells. Therefore, the apparently simple goal of growing reproducible biofilms is often elusive. One of the challenges in defining reproducibility for biofilm research is that different research fields use a spectrum of parameters to define reproducibility for their particular application. For instance, is the researcher interested in achieving a similar population density, height of biofilm structures, or function of the biofilm in a certain ecosystem/industrial context? Within this article we categorize reproducibility into four different levels: level 1, no reproducibility; level 2, standard reproducibility; level 3, potential standard reproducibility; and level 4, total reproducibility. To better understand the need for these different levels of reproducibility, we expand on the 'cities of microbes' analogy for biofilms by imagining that a new civilization has reached the Earth's outskirts and starts studying the Earth's cities. This will provide a better sense of scale and illustrate how small details can impact profoundly on the growth and behavior of a biofilm and our understanding of reproducibility.

Tuning surface topographies on biomaterials to control bacterial infection

Microbial contamination and subsequent formation of biofilms frequently cause failure of surgical implants and a good understanding of the bacteria-surface interactions is vital to the design and safety of biomaterials. In this review, the physical and chemical factors that are involved in the various stages of implant-associated bacterial infection are described. In particular, topographical modification strategies that have been employed to mitigate bacterial adhesion via topographical mechanisms are summarized and discussed comprehensively. Recent advances have improved our understanding about bacteria-surface interactions and have enabled biomedical engineers and researchers to develop better and more effective antibacterial surfaces. The related interdisciplinary efforts are expected to continue in the quest for next-generation medical devices to attain the ultimate goal of improved clinical outcomes and reduced number of revision surgeries.

Biofilm development in a pilot-scale gravity sewer: Physical characteristics, microstructure, and microbial communities

The existence of abundant biofilms on sewer pipeline walls can lead to negative environmental impacts, such as poisonous gas release and pipe corrosions through transforming various pollutants. Investigating the formation process of sewer biofilms is of importance in advancing knowledge of sewer operation and maintenance. In this study, the changes in physical characteristics, microstructure, and microbial communities of sewer biofilm were analyzed in-depth in a pilot-scale gravity sewer during a 45-day operation. The results show that a high specific surface area at the early stage could channel the substrates for stimulating the primary colonizers (e.g., Cytophagia, Sphingobacteriia, Alpha-, and Betaproteobacteria), which could excrete an extracellular matrix to facilitate biofilm growth. The sewer biofilms were gradually formed with 62 g VS/m² organic content, 1.2 mm biofilm thickness, and 89 mg/cm³ dry density after 45 days operation. Moreover, the biofilm growth promoted the emergence of facultative bacteria and anaerobes (affiliated with Flavobacteriia, Gemmatimonadetes, Deltaproteobacteria, and Epsilonproteobacteria). Microelectrode analysis further verified that an anaerobic zone existed in mature biofilm with a negative oxidation-reduction potential (-105 mV), where approximately 0.1 μmol/L of sulfide was produced. Our results suggest that the migration of the microbial community correlated with the changes in the evolved physical characteristics and microstructure of sewer biofilm, and this can contribute to the strategies for sulfide control for improving sewer maintenance.

Home, sweet home: how mucus accommodates our microbiota

As a natural environment for human-microbiota interactions, healthy mucus houses a remarkably stable and diverse microbial community. Maintaining this microbiota is essential to human health, both to support the commensal bacteria that perform a wide array of beneficial functions and to prevent the outgrowth of pathogens. However, how the host selects and maintains a specialized microbiota remains largely unknown. In this viewpoint, we propose several strategies by which mucus may regulate the composition and function of the human microbiota and discuss how compromised mucus barriers in disease can give rise to microbial dysbiosis.

Hydrodynamics and surface properties influence biofilm proliferation

A biofilm is an interface-associated colloidal dispersion of bacterial cells and excreted polymers in which microorganisms find protection from their environment. Successful colonization of a surface by a bacterial community is typically a detriment to human health and property. Insight into the biofilm life-cycle provides clues on how their proliferation can be suppressed. In this review, we follow a cell through the cycle of attachment, growth, and departure from a colony. Among the abundance of factors that guide the three phases, we focus on hydrodynamics and stratum properties due to the synergistic effect such properties have on bacteria rejection and removal. Cell motion, whether facilitated by the environment via medium flow or self-actuated by use of an appendage, drastically improves the survivability of a bacterium. Once in the vicinity of a stratum, a single cell is exposed to near-surface interactions, such as van der Waals, electrostatic and specific interactions, similarly to any other colloidal particle. The success of the attachment and the potential for detachment is heavily influenced by surface properties such as material type and topography. The growth of the colony is similarly guided by mainstream flow and the convective transport throughout the biofilm. Beyond the growth phase, hydrodynamic traction forces on a biofilm can elicit strongly non-linear viscoelastic responses from the biofilm soft matter. As the colony exhausts the means of survival at a particular location, a set of trigger signals activates mechanisms of bacterial release, a life-cycle phase also facilitated by fluid flow. A review of biofilm-relevant hydrodynamics and startum properties provides insight into future research avenues.

A microfluidic platform for in situ investigation of biofilm formation and its treatment under controlled conditions

Background

Studying bacterial adhesion and early biofilm development is crucial for understanding the physiology of sessile bacteria and forms the basis for the development of novel antimicrobial biomaterials. Microfluidics technologies can be applied in such studies since they permit dynamic real-time analysis and a more precise control of relevant parameters compared to traditional static and flow chamber assays. In this work, we aimed to establish a microfluidic platform that permits real-time observation of bacterial adhesion and biofilm formation under precisely controlled homogeneous laminar flow conditions.

Results

Using Escherichia coli as the model bacterial strain, a microfluidic platform was developed to overcome several limitations of conventional microfluidics such as the lack of spatial control over bacterial colonization and allow label-free observation of bacterial proliferation at single-cell resolution. This platform was applied to demonstrate the influence of culture media on bacterial colonization and the consequent eradication of sessile bacteria by antibiotic. As expected, the nutrient-poor medium (modified M9 minimal medium) was found to promote bacterial adhesion and to enable a higher adhesion rate compared to the nutrient-rich medium (tryptic soy broth rich medium ). However, in rich medium the adhered cells colonized the glass surface faster than those in poor medium under otherwise identical conditions. For the first time, this effect was demonstrated to be caused by a higher retention of newly generated bacteria in the rich medium, rather than faster growth especially during the initial adhesion phase. These results also indicate that higher adhesion rate does not necessarily lead to faster biofilm formation. Antibiotic treatment of sessile bacteria with colistin was further monitored by fluorescence microscopy at single-cell resolution, allowing in situ analysis of killing efficacy of antimicrobials.

Conclusion

The platform established here represents a powerful and versatile tool for studying environmental effects such as medium composition on bacterial adhesion and biofilm formation. Our microfluidic setup shows great potential for the in vitro assessment of new antimicrobials and antifouling agents under flow conditions.

Microfluidics Used as a Tool to Understand and Optimize Membrane Filtration Processes

Membrane filtration processes are best known for their application in the water, oil, and gas sectors, but also in food production they play an eminent role. Filtration processes are known to suffer from a decrease in efficiency in time due to e.g., particle deposition, also known as fouling and pore blocking. Although these processes are not very well understood at a small scale, smart engineering approaches have been used to keep membrane processes running. Microfluidic devices have been increasingly applied to study membrane filtration processes and accommodate observation and understanding of the filtration process at different scales, from nanometer to millimeter and more. In combination with microscopes and high-speed imaging, microfluidic devices allow real time observation of filtration processes. In this review we will give a general introduction on microfluidic devices used to study membrane filtration behavior, followed by a discussion of how microfluidic devices can be used to understand current challenges. We will then discuss how increased knowledge on fundamental aspects of membrane filtration can help optimize existing processes, before wrapping up with an outlook on future prospects on the use of microfluidics within the field of membrane separation.

Exploring flow-biofilm-sediment interactions: Assessment of current status and future challenges

Biofilm activities and their interactions with physical, chemical and biological processes are of great importance for a variety of ecosystem functions, impacting hydrogeomorphology, water quality and aquatic ecosystem health. Effective management of water bodies requires advancing our understanding of how flow influences biofilm-bound sediment and ecosystem processes and vice-versa. However, research on this triangle of flow-biofilm-sediment is still at its infancy. In this Review, we summarize the current state of the art and methodological approaches in the flow-biofilm-sediment research with an emphasis on biostabilization and fine sediment dynamics mainly in the benthic zone of lotic and lentic environments. Example studies of this three-way interaction across a range of spatial scales from cell (nm - µm) to patch scale (mm - dm) are highlighted in view of the urgent need for interdisciplinary approaches. As a contribution to the review, we combine a literature survey with results of a pilot experiment that was conducted in the framework of a joint workshop to explore the feasibility of asking interdisciplinary questions. Further, within this workshop various observation and measuring approaches were tested and the quality of the achieved results was evaluated individually and in combination. Accordingly, the paper concludes by highlighting the following research challenges to be considered within the forthcoming years in the triangle of flow-biofilm-sediment: i) Establish a collaborative work among hydraulic and sedimentation engineers as well as ecologists to study mutual goals with appropriate methods. Perform realistic experimental studies to test hypotheses on flow-biofilm-sediment interactions as well as structural and mechanical characteristics of the bed. ii) Consider spatially varying characteristics of flow at the sediment-water interface. Utilize combinations of microsensors and non-intrusive optical methods, such as particle image velocimetry and laser scanner to elucidate the mechanism behind biofilm growth as well as mass and momentum flux exchanges between biofilm and water. Use molecular approaches (DNA, pigments, staining, microscopy) for sophisticated community analyses. Link varying flow regimes to microbial communities (and processes) and fine sediment properties to explore the role of key microbial players and functions in enhancing sediment stability (biostabilization). iii) Link laboratory-scale observations to larger scales relevant for management of water bodies. Conduct field experiments to better understand the complex effects of variable flow and sediment regimes on biostabilization. Employ scalable and informative observation techniques (e.g., hyperspectral imaging, particle tracking) that can support predictions on the functional aspects, such as metabolic activity, bed stability, nutrient fluxes under variable regimes of flow-biofilm-sediment.

Thinking outside the shell: novel sensors designed from plasmon-enhanced fluorescent concentric nanoparticles

The alteration of photophysical properties of fluorophores in the vicinity of a metallic nanostructure, a phenomenon termed plasmon- or metal-enhanced fluorescence (MEF), has been investigated extensively and used in a variety of proof-of-concept demonstrations over the years. A particularly active area of development in this regard has been the design of nanostructures where fluorophore and metallic core are held in a stable geometry that imparts improved luminosity and photostability to a plethora of organic fluorophores. This minireview presents an overview of MEF-based concentric core-shell sensors developed in the past few years. These architectures expand the range of applications of nanoparticles (NPs) beyond the uses possible with fluorescent molecules. Design aspects that are being described include the influence of the nanocomposite structure on MEF, notably the dependence of fluorescence intensity and lifetime on the distance to the plasmonic core. The chemical composition of nanocomposites as a design feature is also discussed, taking as an example the use of non-noble plasmonic metals such as indium as core materials to enhance multiple fluorophores throughout the UV-Vis range and tune the sensitivity of halide-sensing fluorophores operating on the principle of collisional quenching. Finally, the paper describes how various solid substrates can be functionalized with MEF-based nanosensors to bestow them with intense and photostable pH-sensitive properties for use in fields such as medical therapy and diagnostics, dentistry, biochemistry and microfluidics.

A Novel Method to Reveal a Ureolytic Biofilm Attachment and In Situ Growth Monitoring by Electrochemical Impedance Spectroscopy

The formation of biofilms capable of efficiently carrying out ureolysis is of fundamental importance in several biotechnological systems such as urinary tract infections, building materials and municipal wastewater treatment. This work proposes a straightforward method for the formation of a ureolytic biofilm attached to graphite. The proposed strategy reduced the time needed to complete ureolysis to 3 days instead of 16 days required in suspension culture. To confirm the formation of a ureolytic biofilm, scanning electron microscopy and confocal laser scanning microscopy studies were employed ex situ. However, it is imperative to analyse the biofilm by direct non-invasive techniques. Accordingly, open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) were used as in situ monitoring techniques. The reduction in OCP from - 0.01 to - 0.2 V vs. Ag/AgCl and the increase in capacitance from 200 to 260 μF cm^-2 were related to biofilm attachment. To the best of our knowledge, this is the first time in which a ureolytic biofilm attachment has been analysed by EIS. The increase in the biomass from 0.04 to 2.81 μm³ μm^-2 and in average thickness from 10.19 to 32.78 μm was related to biofilm maturation.

Beyond Risk: Bacterial Biofilms and Their Regulating Approaches

Bacterial biofilms are complex surface attached communities of bacteria held together by self-produced polymer matrixs mainly composed of polysaccharides, secreted proteins, and extracellular DNAs. Bacterial biofilm formation is a complex process and can be described in five main phases: (i) reversible attachment phase, where bacteria non-specifically attach to surfaces; (ii) irreversible attachment phase, which involves interaction between bacterial cells and a surface using bacterial adhesins such as fimbriae and lipopolysaccharide (LPS); (iii) production of extracellular polymeric substances (EPS) by the resident bacterial cells; (iv) biofilm maturation phase, in which bacterial cells synthesize and release signaling molecules to sense the presence of each other, conducing to the formation of microcolony and maturation of biofilms; and (v) dispersal/detachment phase, where the bacterial cells depart biofilms and comeback to independent planktonic lifestyle. Biofilm formation is detrimental in healthcare, drinking water distribution systems, food, and marine industries, etc. As a result, current studies have been focused toward control and prevention of biofilms. In an effort to get rid of harmful biofilms, various techniques and approaches have been employed that interfere with bacterial attachment, bacterial communication systems (quorum sensing, QS), and biofilm matrixs. Biofilms, however, also offer beneficial roles in a variety of fields including applications in plant protection, bioremediation, wastewater treatment, and corrosion inhibition amongst others. Development of beneficial biofilms can be promoted through manipulation of adhesion surfaces, QS and environmental conditions. This review describes the events involved in bacterial biofilm formation, lists the negative and positive aspects associated with bacterial biofilms, elaborates the main strategies currently used to regulate establishment of harmful bacterial biofilms as well as certain strategies employed to encourage formation of beneficial bacterial biofilms, and highlights the future perspectives of bacterial biofilms.

Nisin infusion into surface cracks in oxide coatings to create an antibacterial metallic surface

The efficacy of surface topology and chemistry on the ability for a surface to retain antimicrobial performance via the immobilization of a peptide was evaluated. A nanosecond pulsed laser was used to create oxide films on Ti-6Al-4V and 304L stainless steel. The laser conditions employed created a mudflat cracked surface on titanium, but no cracks on the steel. An antimicrobial peptide, nisin, was infused into the cracked and uncracked oxide surfaces to provide antimicrobial activity against Gram-positive bacteria; Listeria monocytogenes was chosen as the model microorganism. Release tests in distilled water at room temperature show that nisin is slowly liberated from the uncracked stainless steel surface, while there was no evidence of nisin liberation from the cracked titanium alloy surfaces, likely due to immobilization of the peptide into the artificially created micro-cracks on the surface of this alloy. Surfaces treated with nisin became active and exhibit anti-microbial performance against L. monocytogenes; this behavior is mostly retained after scrubbing/washing and simple immersion in water.

Microfluidic System for Observation of Bacterial Culture and Effects on Biofilm Formation at Microscale

Biofilms exist in the natural world and applied to many industries. However, due to the variety of characteristics caused by their complex components, biofilms can also lead to membrane fouling and recurrent infections which pose threats to human health. So, to make the best use of their advantages and avoid their disadvantages, knowing the best time and methods for improving or preventing biofilm formation is important. In situ observation without fluorescence labeling in microscale and according to a time scale is useful to research biofilm and confine its formation. In this study, we developed a microfluidic system for real-time observation of bacteria culture and biofilms development at microscale. We cultured E. coli ATCC 25922 on a chip at continuous flow of the velocity, which could promote bacterial formation. Biofilms formation under the condition of adding amoxicillin at different times is also discussed. In addition, the mixed strains from sludge were also cultured on chip, and possible factors in biofilm formation are discussed. Our results show that a microfluidic device could culture microorganisms in continuous flow and accelerate them to adhere to the surface, thereby promoting biofilm formation. Overall, this platform is a useful tool in research on initial biofilm formation, which can contribute to preventing biofouling and infections.

Conditions Under Which Glutathione Disrupts the Biofilms and Improves Antibiotic Efficacy of Both ESKAPE and Non-ESKAPE Species

Bacterial antibiotic resistance has increased in recent decades, raising concerns in hospital and community settings. Novel, innovative strategies are needed to eradicate bacteria, particularly within biofilms, and diminish the likelihood of recurrence. In this study, we investigated whether glutathione (GSH) can act as a biofilm disruptor, and enhance antibiotic effectiveness against various bacterial pathogens. Biological levels (10 mM) of GSH did not have a significant effect in inhibiting growth or disrupting the biofilm in four out of six species tested. However, exposure to 30 mM GSH showed >50% decrease in growth for all bacterial species, with almost 100% inhibition of Streptococcus pyogenes and an average of 94-52% inhibition for Escherichia coli, Methicillin-resistant Staphylococcus aureus (MRSA) and Methicillin-sensitive S. aureus (MSSA) and multi-drug resistant Acinetobacter baumannii (MRAB) isolates, respectively. Klebsiella pneumoniae and Enterobacter sp. isolates were however, highly resistant to 30 mM GSH. With respect to biofilm viability, all species exhibited a >50% decrease in viability with 30 mM GSH, with confocal imaging showing considerable change in the biofilm architecture of MRAB isolates. The mechanism of GSH-mediated biofilm disruption is possibly due to a concentration-dependent increase in GSH acidity that triggers cleaving of the matrix components. Enzymatic treatment of MRAB revealed that eDNA and polysaccharides are essential for biofilm stability and eDNA removal enhanced amikacin efficiency. Combination of GSH, amikacin and DNase-I showed the greatest reduction in MRAB biofilm viability. Additionally, GSH alone and in combination with amikacin fostered human fibroblast cell (HFF-1) growth and confluence while inhibiting MRAB adhesion and colonization.

Antibacterial Silver Nanomaterial Synthesis From Mesoflavibacter zeaxanthinifaciens and Targeting Biofilm Formation

Considering the significance of biological and eco-friendly nanomaterials, in the present study, we have synthesized silver nanoparticles from the exopolysaccharide of recently recovered bacterial strain CEES51 from the Red Sea coastal area of Jeddah, Saudi Arabia. 16S ribosomal RNA gene sequencing was used to characterize the isolated bacteria, and it was identified as Mesoflavibacter zeaxanthinifaciens and assigned an accession number MH707257.1 GenBank. The bacterial strain is an excellent exopolysaccharide producer and survived at hypersaline (30%) and high-temperature (50°C) conditions. The bacterial exopolysaccharides were employed for the fabrication of silver nanoparticles at room temperature. UV-visible spectrophotometer optimized the synthesized nanoparticles, and their size was determined by Nanophox particle size analyzer and dynamic light scattering. Additionally, the X-ray powder diffraction and Fourier-transform infrared spectroscopy studies also approved its crystalline nature and the involvement of organic functional groups in their formation. The synthesized nanomaterials were tested for their antibacterial and antibiofilm properties against pathogenic microorganisms Bacillus subtilis and methicillin-resistant Staphylococcus aureus. The antimicrobial property showed time, and dose-dependent response with a maximum of zone inhibition was observed at around 22 and 18 mm at a dose of 50 µg/well against B. subtilis and S. aureus and a minimum inhibitory concentration of 8 and 10 µg/ml, respectively. Furthermore, the synthesized silver nanoparticles possessed a substantial antibiofilm property and were also found to be biocompatible as depicted by red blood cell lysis assay and their interaction with peripheral blood mononuclear cells and human embryonic kidney 293 cells. Therefore, Mesoflavibacter zeaxanthinifaciens is found to be an excellent source for exopolysaccharide synthesis that assists in the silver nanoparticle production.

Investigating fouling at the pore-scale using a microfluidic membrane mimic filtration system

The work investigates fouling in a microfluidic membrane mimic (MMM) filtration system for foulants such as polystyrene particles and large polymeric molecules. Our MMM device consists of a staggered arrangement of pillars which enables real-time visualization and analysis of pore-scale phenomena. Different fouling scenarios are investigated by conducting constant-pressure experiments. Fouling experiments are performed with three different types of foulants: polystyrene particle solution (colloidal fouling), polyacrylamide polymer solution (organic fouling) and a mixture of these two solutions (combined fouling). Four major categories of microscopic fouling are observed: cake filtration (upstream), pore blocking (inside the pores), colloidal aggregation (downstream) and colloidal streamer fouling (downstream). Our microfluidic experiments show that downstream colloidal aggregation and streamer fouling have a significant effect on overall membrane fouling which were not studied before.

Rivalry in Bacillus subtilis colonies: enemy or family?

Two colonies of Bacillus subtilis of identical strains growing adjacent to each other on an agar plate exhibit two distinct types of interactions: they either merge as they grow or demarcation occurs leading to formation of a line of demarcation at the colony fronts. The nature of this interaction depends on the agar concentration in the growth medium and the initial separation between the colonies. When the agar concentration was 0.67% or lower, the two sibling colonies were found to always merge. At 1% or higher concentrations, the colonies formed a demarcation line only when their initial separation was 20 mm or higher. Interactions of a colony with solid structures and liquid drops have indicated that biochemical factors rather than the presence of physical obstacles are responsible for the demarcation line formation. A reaction diffusion model has been formulated to predict if two sibling colonies will form a demarcation line under given agar concentration and initial separation. The model prediction agrees well with experimental findings and generates a dimensionless phase diagram containing merging and demarcation regimes. The phase diagram is in terms of a dimensionless initial separation, d[combining macron], and a dimensionless diffusion coefficient, D[combining macron], of the colonies. The phase boundary between the two interaction regimes can be described by a power law relation between d[combining macron] and D[combining macron].

Pore-scale hydrodynamics influence the spatial evolution of bacterial biofilms in a microfluidic porous network

Bacteria occupy heterogeneous environments, attaching and growing within pores in materials, living hosts, and matrices like soil. Systems that permit high-resolution visualization of dynamic bacterial processes within the physical confines of a realistic and tractable porous media environment are rare. Here we use microfluidics to replicate the grain shape and packing density of natural sands in a 2D platform to study the flow-induced spatial evolution of bacterial biofilms underground. We discover that initial bacterial dispersal and grain attachment is influenced by bacterial transport across pore space velocity gradients, a phenomenon otherwise known as rheotaxis. We find that gravity-driven flow conditions activate different bacterial cell-clustering phenotypes depending on the strain's ability to product extracellular polymeric substances (EPS). A wildtype, biofilm-producing bacteria formed compact, multicellular patches while an EPS-defective mutant displayed a linked-cell phenotype in the presence of flow. These phenotypes subsequently influenced the overall spatial distribution of cells across the porous media network as colonies grew and altered the fluid dynamics of their microenvironment.

Effects of food waste addition on biofilm formation and sulfide production in a gravity sewer

The conversion of food waste (FW) into the sewage system is regarded as a promising method of relieving the burden of solid waste management. However, knowledge about its effects on sewer processes is limited, particularly in terms of biofilm formation and sulfide production. In this study, a gravity sewer system was set up to investigate the effects of the addition of FW on biofilm formation, the sulfate-reducing bacteria (SRB) population, and the sulfide production potential. The sewer biofilm characteristics changed with long-term FW addition, and a greater thickness (by 32%), an increased dry density (by 13%), and more extracellular polymeric substance (by 141%) were observed. The thicker and denser biofilm limited oxygen diffusion, enlarged the anaerobic area in the sewer biofilm, promoted an increase in the SRB population, and enhanced the sulfide production potential in the gravity sewer. Substantial differences in the H₂S profiles in the biofilm samples with and without the addition of FW were observed via microelectrode analysis. A model-based investigation of sewer biofilm formation with and without the addition of FW was conducted with a dynamic sewer biofilm model to gain further insights into sewer biofilm processes. The results suggest that the addition of FW can promote sulfide production and SRB growth in a sewer biofilm, which can be significantly affected by the ratio of FW to sewage. It is worth further investigations of the impacts of FW addition on the potential sulfide production in pressure sewers.

Mixed-species biofilms for high-cell-density application of Synechocystis sp. PCC 6803 in capillary reactors for continuous cyclohexane oxidation to cyclohexanol

Photosynthetic microorganisms have enormous potential to produce fuels and value-added compounds sustainably. Efficient cultivation concepts that enable optimal light and CO₂ supply are necessary for the realization of high cell densities (HCDs), and subsequently for process implementation. We introduce capillary biofilm reactors with a high surface to volume ratio, and thus enhanced light availability, enabling HCDs of photo-autotrophic microorganisms. However, oxygenic photosynthesis leads to O₂ accumulation in such systems, impairing biofilm growth. We combined O₂ producing Synechocystis with O₂ respiring Pseudomonas using proto-cooperation to achieve HCDs of up to 51.8 g_BDW L^-1. This concept was coupled to the challenging C-H oxyfunctionalization of cyclohexane to cyclohexanol with a remarkable conversion of >98% and selectivity of 100% (KA oil). High photoautotrophic biocatalyst concentrations were established and resulted in a productivity of 3.76 g_cyclohexanol m^-2 day^-1, which was maintained for at least one month.

Bacterial mechanosensing: the force will be with you, always

Whether bacteria are in the planktonic state, free-swimming or free-floating in liquid, or in the biofilm state, sessile on surfaces, they are always subject to mechanical forces. The long, successful evolutionary history of bacteria implies that they are capable of adapting to varied mechanical forces, and probably even actively respond to mechanical cues in their changing environments. However, the sensing of mechanical cues by bacteria, or bacterial mechanosensing, has been under-investigated. This leaves the mechanisms underlying how bacteria perceive and respond to mechanical cues largely unknown. In this Review, we first examine the surface-associated behavior of bacteria, outline the clear evidence for bacterial mechanosensing and summarize the role of flagella, type-IV pili, and envelope proteins as potential mechanosensors, before presenting indirect evidence for mechanosensing in bacteria. The general themes underlying bacterial mechanosensing that we highlight here may provide a framework for future research.

Microfluidic bioanalytical flow cells for biofilm studies: a review

Bacterial biofilms are among the oldest and most prevalent multicellular life forms on Earth and are increasingly relevant in research areas related to industrial fouling, medicine and biotechnology. The main hurdles to obtaining definitive experimental results include time-varying biofilm properties, structural and chemical heterogeneity, and especially their strong sensitivity to environmental cues. Therefore, in addition to judicious choice of measurement tools, a well-designed biofilm study requires strict control over experimental conditions, more so than most chemical studies. Due to excellent control over a host of physiochemical parameters, microfluidic flow cells have become indispensable in microbiological studies. Not surprisingly, the number of lab-on-chip studies focusing on biofilms and other microbiological systems with expanded analytical capabilities has expanded rapidly in the past decade. In this paper, we comprehensively review the current state of microfluidic bioanalytical research applied to bacterial biofilms and offer a perspective on new approaches that are expected to drive continued advances in this field.

Real-Time Study of Rapid Spread of Antibiotic Resistance Plasmid in Biofilm Using Microfluidics

Gene transfer in biofilms is known to play an important role in antibiotic resistance dissemination. However, the process remains poorly understood. In this study, microfluidics with time-lapse imaging was used for real-time monitoring of plasmid-mediated horizontal gene transfer (HGT) in biofilms. Pseudomonas putida KT2440 harboring an antibiotic resistance plasmid RP4 was chosen as the donor while Escherichia coli and activated sludge bacteria were used as the recipient cells. Dynamic features of the transfer process, including the transfer rate, cell growth rate and kinetic changes of the transfer frequency, were determined. It was found that the routes for gene transfer strongly depend on the structure and composition of a biofilm. While intraspecies HGT is essential to initiate a transfer event, the secondary retransfer from transconjugants to the same species is more efficient and can cause cascading gene spread in single-strain biofilms. For the activated sludge biofilm, only small and scattered colonies formed and vertical gene transfer appears to be the dominant route after initial intraspecies transfer. Furthermore, more than 46% of genera in the activated sludge were permissive to plasmid RP4, many of which are associated with human pathogens. These phenomena imply early prevention and interruptions to biofilm structure could provide an effect way to inhibit rapid antibiotic resistance gene spread and reduce the likelihood of catastrophic events associated with antibiotic resistance.

Towards standardized mechanical characterization of microbial biofilms: analysis and critical review

Developing reliable anti-biofilm strategies or efficient biofilm-based bioprocesses strongly depends on having a clear understanding of the mechanisms underlying biofilm development, and knowledge of the relevant mechanical parameters describing microbial biofilm behavior. Many varied mechanical testing methods are available to assess these parameters. The mechanical properties thus identified can then be used to compare protocols such as antibiotic screening. However, the lack of standardization in both mechanical testing and the associated identification methods for a given microbiological goal remains a blind spot in the biofilm community. The pursuit of standardization is problematic, as biofilms are living structures, i.e., both complex and dynamic. Here, we review the main available methods for characterizing the mechanical properties of biofilms through the lens of the relationship linking experimental testing to the identification of mechanical parameters. We propose guidelines for characterizing biofilms according to microbiological objectives that will help the reader choose an appropriate test and a relevant identification method for measuring any given mechanical parameter. The use of a common methodology for the mechanical characterization of biofilms will enable reliable analysis and comparison of microbiological protocols needed for improvement of engineering process and screening.

Combined influence of hydrodynamics and chemotaxis in the distribution of microorganisms around spherical nutrient sources

We study how the interaction between hydrodynamics and chemotaxis affects the colonization of nutrient sources by microorganisms. We use an individual-based model and perform probabilistic simulations to ascertain the impact of important environmental and motility characteristics on the spatial distribution of microorganisms around a spherical nutrient source. In general, we unveil four distinct regimes based on the distribution of the microorganisms: (i) strong surface colonization, (ii) rotary-diffusion-induced "off-surface" accumulation, (iii) a depletion zone in the spatial distribution, and (iv) no appreciable aggregation, with their occurrence being contingent on the relative strengths of hydrodynamic and chemotactic effects. More specifically, we show that the extent of surface colonization first increases, then reaches a plateau, and finally decreases as the nutrient availability is increased. We also show that surface colonization reduces monotonically as the mean run length of the chemotactic microorganisms increases. Our study provides insight into the interplay of two important mechanisms governing microorganism behavior near nutrient sources, isolates each of their effects, and thus offers greater predictability of this nontrivial phenomenon.

Impact of bacterial streamers on biofouling of microfluidic filtration systems

We investigate the effect of biofouling in a microfluidic filtration system. The microfluidic platform consists of cylindrical microposts with a pore-spacing of 2 μm, which act as the filtration section of the device. One of our key findings is that there exists a critical pressure difference above which pronounced streamer formation is observed, which eventually leads to rapid clogging of the device with an accompanying exponential decrease in permeate flow. Moreover, when streamers do form, de-clogging of pores also occurs intermittently, which leads to small time scale fluctuations [O(10¹ s)] superimposed upon the large time scale [O(10² min)] clogging of the system. These de-clogging phenomena lead to a sharp increase in water permeation through the microfluidic filtration device but rates the water quality as biomass debris is transported in the permeate. Streamer-based clogging shares similarities with various fouling mechanisms typically associated with membranes. Finally, we also show that the pH of the feed strongly affects biofouling of the microfluidic filtration system.