Rational design of nanomaterials for water treatment

Surface-tuning TiO2 NR photoanodes using CoOx interlayers and NiFe-LDH cocatalysts for photoelectrochemical wastewater treatment

Increasing multidrug-resistant pathogenic microbial around the world become a global problem, making it imperative to develop effective methods for bacterial inactivation in wastewater. In this study, we propose a multifunctional photoelectrochemical (PEC) system to successfully disinfect microbial cells and degrade orange (II) dyes. CoOx NP were synthesized by spin-coating onto hydrothermally synthesized TiO2 nanorod arrays followed by electrodeposited NiFe-LDH to develop the NiFe-LDH/CoOx NP-TiO2 NRs. Interestingly, spin-coated CoOx NP-TiO2 NRs exhibited a 1.5-fold enhancement in photocurrent (∼1.384 mA/cm2) than pristine TiO2 NRs (0.92 mA/cm2). A NiFe-layered double hydroxide (LDH) cocatalysts layer further exhibits the maximum photocurrent density of 1.64 mA/cm2 with IPCE of 84.5% at 1.0 VAg/AgCl at 380 nm. Furthermore, NiFe-LDH/CoOx-TiO2 NR photoanodes were effectually employed for photoelectrochemical bacteria disinfection and organic pollutant removals. With NiFe-LDH/CoOx-TiO2 NR, 99% (120 min) bacterial inactivation and 99% (60 min) orange II dye decomposition efficiency was achieved. Superoxide radicals (O2-), hydroxyl radicals (OH), and holes (h+) played a critical role in the PEC degradation systems. Due to the synergy between NiFe-LDH cocatalyst and CoOx interlayer, surface water oxidation reactions were accelerated over NiFe-LDH/CoOx NP-TiO2 NRs. The charge transport process in NiFe-LDH/CoOx NP-TiO2 NRs photoanode-based PEC system was proposed in detail.

Nanomaterials for Removal of Phenolic Derivatives from Water Systems: Progress and Future Outlooks

Environmental pollution remains one of the most challenging problems facing society worldwide. Much of the problem has been caused by human activities and increased usage of various useful chemical agents that inadvertently find their way into the environment. Triclosan (TCS) and related phenolic compounds and derivatives belong to one class of such chemical agents. In this work, we provide a mini review of these emerging pollutants and an outlook on the state-of-the-art in nanostructured adsorbents and photocatalysts, especially nanostructured materials, that are being developed to address the problems associated with these environmental pollutants worldwide. Of note, the unique properties, structures, and compositions of mesoporous nanomaterials for the removal and decontamination of phenolic compounds and derivatives are discussed. These materials have a great ability to scavenge, adsorb, and even photocatalyze the decomposition of these compounds to mitigate/prevent their possible harmful effects on the environment. By designing and synthesizing them using silica and titania, which are easier to produce, effective adsorbents and photocatalysts that can mitigate the problems caused by TCS and its related phenolic derivatives in the environment could be fabricated. These topics, along with the authors' remarks, are also discussed in this review.

Utilization of a mixed matrix membrane modified by novel dendritic fibrous nanosilica (KCC-1-NH-CS2) toward water purification

Various nanostructures have been used to improve the performance of nanocomposite membranes. Dendritic fibrous nanosilica (DNFS) is a new nanostructure and its performance as an adsorbent for the removal of pigments has been investigated. In this study, a type of modified dendritic fibrous nanosilica containing CS₂ groups (KCC-1-NH-CS₂) was synthesized and inserted as an additive into nanocomposite acrylonitrile–butadiene–styrene (ABS) membranes. Due to its high surface area and unique functional groups, this additive can improve the membrane's ability to remove dyes from aqueous media. Synthesized nanostructures and membranes were characterized by different analysis. The results showed that the water contact angle as a measure of surface hydrophilicity in membrane M₅ compared to membrane M₁ decreased from 79° to 67°. Water absorption (swelling degree) in membrane M₅ increased by more than 100% compared to the bare membrane. Also, this membrane, despite having high porosity (42%) and improved flux (35 L m⁻² h⁻¹), has a better efficiency in removing dyes (MG: 99%, MB: 98%, MO: 82%) in comparison with other reported works.

KCC-1-NH-CS₂ has been used to improve the performance of acrylonitrile–butadiene–styrene membrane.

Nanostructured Materials for Water Purification: Adsorption of Heavy Metal Ions and Organic Dyes

Chemical water pollution poses a threat to human beings and ecological systems. The purification of water to remove toxic organic and inorganic pollutants is essential for a safe society and a clean environment. Adsorption-based water treatment is considered one of the most effective and economic technologies designed to remove toxic substances. In this article, we review the recent progress in the field of nanostructured materials used for water purification, particularly those used for the adsorption of heavy metal ions and organic dyes. This review includes a range of nanostructured materials such as metal-based nanoparticles, polymer-based nanomaterials, carbon nanomaterials, bio-mass materials, and other types of nanostructured materials. Finally, the current challenges in the fields of adsorption of toxic materials using nanostructured materials are briefly discussed.

Preparation of polymer-based foam for efficient oil-water separation based on surface engineering

The leakages of a large number of organic solvents and oil spills not only cause extensive economic losses, but also destroy the ecological environment. However, there were few studies on the surface engineering of adsorption materials for efficient oil-water separation in complex environments. In this research, through surface engineering, the polymer-based foam exhibited high efficiency oil-water separation performance in different pH environments. Hydrophobic groups were introduced onto the surface of nano-sized SiO₂ particles via hydrolysis and polycondensation reactions, and then the modified SiO₂ was loaded on the foam. After modification, the water contact angle of the modified foam increased from 116.4° to 152.5°, and the oil-water separation performance was obviously enhanced. The oil removal rate of the modified foam remained above 96%. The highest capacity of petroleum diesel was 33.4 g^-1, which was much higher than other similar adsorption materials. In addition, the modified foam maintained good hydrophobicity and oil removal rate in a wide pH range. The efficient oleophilic and hydrophobic foam prepared by combining green physical foaming with surface engineering was expected to be widely used in large-scale organic solvent recovery and oil leakage emergency treatment.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Comprehensive Analysis of Spinel-Type Mixed Metal Oxide-Functionalized Polysulfone Membranes toward Fouling Resistance and Dye and Natural Organic Matter Removal

Nanostructured polymeric membranes are of great importance in enhancing the antifouling properties during water filtration. Nanomaterials with tunable size, morphology and composition, surface modification, and increased functionality provide considerable opportunities for effective wastewater treatment. Thus, in this work, an attempt has been made to use spinel-structured MnCo₂O₄ as a nanofiller in the fabrication of nanostructured polysulfone (PSF) mixed matrix membranes and is investigated in terms of morphology, hydrophilicity, permeability, protein and natural organic matter separation, dye removal, and, finally, antifouling properties. The MnCo₂O₄ nanomaterials are synthesized and characterized via X-ray diffraction and field emission scanning electron microscopy and are loaded into a membrane matrix with varied concentrations (0 to 1.5 wt %). PSF nanocomposite membranes are prepared via a nonsolvent-induced phase-separation process. The results show an enhancement in hydrophilicity, porosity, and permeability with respect to the modified nanocomposite membranes because of oxygen-rich species in the membrane matrix, which increases affinity toward water. It was also found that the modified membranes display remarkably greater pure water flux (PWF) (220 L/m² h), higher Congo red rejection coefficient (99.86%), higher humic acid removal (99.81%), higher fouling resistance, and a significant flux recovery ratio (FRR) (88%) when tested with bovine serum albumin protein when compared to a bare PSF membrane (30 L/m² h PWF and 35% FRR). This is because the addition of MnCo₂O₄ nanoparticles into the polymeric casting solution yielded tighter PSF membranes with a denser skin layer and greater selectivity. Thus, the enhanced permeability, greater rejection coefficient, and antifouling properties show the promising potential of the fabricated PSF-spinel nanostructured membrane to be utilized in membrane technology for wastewater treatment.

Elucidating the photoprotective properties of natural UV screening agents: ZEKE-PFI spectroscopy of methyl sinapate

As a prominent derivative of a natural sunscreen, methyl sinapate is an ideal candidate to provide fundamental insight into strategies on how to come to a rational design of artificial sunscreen filters with improved photoprotective properties. Here, static and time-resolved Zero Kinetic Energy-Pulsed Field Ionization (ZEKE-PFI) photoelectron spectroscopy has been used to study the spectroscopy and decay pathways of its electronically excited states. We find that different conformers are subject to distinct structural changes upon electronic excitation, and trace the structural changes that occur upon excitation back to the character of the LUMO. Ionization efficiency spectra in combination with pump-probe ZEKE-PFI spectra are consistent with the conclusion that the long-lived electronically excited state observed in the decay of the lowest excited singlet state is the lowest excited triplet state. Concurrently with providing information on the electronically excited states, the studies allow for a detailed characterization of the spectroscopic properties of the ground state of the radical ion, which is important in the context of the use of cinnamates in nature as antioxidants. Our studies determine the adiabatic ionization energies of the syn/cis, anti/cis and anti/trans conformers as 60 291.1 ± 0.5, 60 366.9 ± 0.5 and 60 503.9 ± 1.0 cm^-1, respectively, and provide accurate vibrational fequencies of low-frequency modes of the molecular ion in its electronic ground state. Finally, the studies emphasize the important role of vibrational and electronic autoionization processes that start to dominate the ionization dynamics in non-rigid molecules of the present size.

Nano-silica and magnetized-silica mitigated lead toxicity: Their efficacy on bioaccumulation risk, performance, and apoptotic targeted genes in Nile tilapia (Oreochromis niloticus)

Contamination of aquatic systems with heavy metals (HM) is of great concern owing to their deleterious impact on living organism. The current research is focused on application of silica particles with new functionalized properties (magnetic silica; SiMag or Nanoporous silica; SiNPs) and their efficacy to mitigate lead (pb) toxicity in Nile tilapia. One thousand fingerlings were distributed: two control groups (negative; without pb toxicity (NC) positive (with pb toxicity) and other four groups received two silica sources (SiMag or SiNPs) with two levels (400 and 600 mg/kg diet) for 56 days then exposed to pb for 30 days. Before toxicity exposure, maximum growth, and most improved feed conversion ratio and biochemical parameters were noticed with higher SiMag or SiNPs levels. Serum antioxidant enzymes and their transcriptional levels in muscle and liver were boosted in groups received SiMag or SiNPs. After toxicity exposure, hematological and antioxidants biomarkers maintained at adequate levels in SiMag or SiNPs. Prominent reduction of residual pb in gills, liver, kidney, and muscle was observed in SiNPs then SiMag groups. Interestingly, the maximum down-regulation of P450, caspase-3 and HSP-70 and MT were observed in groups received 600 mg/kg diet of SiMag or SiNPs. The higher level of P53 in liver and gills was detected in PC, inversely reduced in SiMag or SiNPs. Severity of the histopathological alterations in examined organs greatly reduced in groups received SiMag or SiNPs, unlike it were induced in PC group. In conclusion, higher SiMag or SiNPs levels not only mitigate negatives impact of pb toxicity in fish but also ensure its safety for human consumption.

Recent advances in polymeric nanostructured ion selective membranes for biomedical applications

Nano structured ion-selective membranes (ISMs) are very attractive materials for a wide range of sensing and ion separation applications. The present review focuses on the design principles of various ISMs; nanostructured and ionophore/ion acceptor doped ISMs, and their use in biomedical engineering. Applications of ISMs in the biomedical field have been well-known for more than half a century in potentiometric analysis of biological fluids and pharmaceutical products. However, the emergence of nanotechnology and sophisticated sensing methods assisted in miniaturising ion-selective electrodes to needle-like sensors that can be designed in the form of implantable or wearable devices (smartwatch, tattoo, sweatband, fabric patch) for health monitoring. This article provides a critical review of recent advances in miniaturization, sensing and construction of new devices over last decade (2011-2021). The designing of tunable ISM with biomimetic artificial ion channels offered intensive opportunities and innovative clinical analysis applications, including precise biosensing, controlled drug delivery and early disease diagnosis. This paper will also address the future perspective on potential applications and challenges in the widespread use of ISM for clinical use. Finally, this review details some recommendations and future directions to improve the accuracy and robustness of ISMs for biomedical applications.

Towards developing novel and sustainable molecular light-to-heat converters

Light-to-heat conversion materials generate great interest due to their widespread applications, notable exemplars being solar energy harvesting and photoprotection. Another more recently identified potential application for such materials is in molecular heaters for agriculture, whose function is to protect crops from extreme cold weather and extend both the growing season and the geographic areas capable of supporting growth, all of which could help reduce food security challenges. To address this demand, a new series of phenolic-based barbituric absorbers of ultraviolet (UV) radiation has been designed and synthesised in a sustainable manner. The photophysics of these molecules has been studied in solution using femtosecond transient electronic and vibrational absorption spectroscopies, allied with computational simulations and their potential toxicity assessed by in silico studies. Following photoexcitation to the lowest singlet excited state, these barbituric absorbers repopulate the electronic ground state with high fidelity on an ultrafast time scale (within a few picoseconds). The energy relaxation pathway includes a twisted intramolecular charge-transfer state as the system evolves out of the Franck–Condon region, internal conversion to the ground electronic state, and subsequent vibrational cooling. These barbituric absorbers display promising light-to-heat conversion capabilities, are predicted to be non-toxic, and demand further study within neighbouring application-based fields.

The synthesis and photophysical properties of phenolic barbiturics are reported. These molecules convert absorbed ultraviolet light to heat with high fidelity and may be suitable for inclusion in foliar sprays to boost crop protection and production.

Nanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration

Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.

Nanoadsorbants for the Removal of Heavy Metals from Contaminated Water: Current Scenario and Future Directions

Heavy metal pollution of aquatic media has grown significantly over the past few decades. Therefore, a number of physical, chemical, biological, and electrochemical technologies are being employed to tackle this problem. However, they possess various inescapable shortcomings curbing their utilization at a commercial scale. In this regard, nanotechnology has provided efficient and cost-effective solutions for the extraction of heavy metals from water. This review will provide a detailed overview on the efficiency and applicability of various adsorbents, i.e., carbon nanotubes, graphene, silica, zero-valent iron, and magnetic nanoparticles for scavenging metallic ions. These nanoparticles exhibit potential to be used in extracting a variety of toxic metals. Recently, nanomaterial-assisted bioelectrochemical removal of heavy metals has also emerged. To that end, various nanoparticle-based electrodes are being developed, offering more efficient, cost-effective, ecofriendly, and sustainable options. In addition, the promising perspectives of nanomaterials in environmental applications are also discussed in this paper and potential directions for future works are suggested.

Nanozymes-Hitting the Biosensing "Target"

Nanozymes are a class of artificial enzymes that have dimensions in the nanometer range and can be composed of simple metal and metal oxide nanoparticles, metal nanoclusters, dots (both quantum and carbon), nanotubes, nanowires, or multiple metal-organic frameworks (MOFs). They exhibit excellent catalytic activities with low cost, high operational robustness, and a stable shelf-life. More importantly, they are amenable to modifications that can change their surface structures and increase the range of their applications. There are three main classes of nanozymes including the peroxidase-like, the oxidase-like, and the antioxidant nanozymes. Each of these classes catalyzes a specific group of reactions. With the development of nanoscience and nanotechnology, the variety of applications for nanozymes in diverse fields has expanded dramatically, with the most popular applications in biosensing. Nanozyme-based novel biosensors have been designed to detect ions, small molecules, nucleic acids, proteins, and cancer cells. The current review focuses on the catalytic mechanism of nanozymes, their application in biosensing, and the identification of future directions for the field.

A Novel Calcium Oxalate/Sepiolite Composite for Highly Selective Adsorption of Pb(II) from Aqueous Solutions

Synthesizing functional nanomaterials from naturally abundant clay has always been of vital importance for resource utilization, however, the lack of new methods to effectively utilize low-grade clay presents a significant challenge. Herein, a calcium oxalate/sepiolite nanocomposite (SMN-x) was prepared by using the water bath heating method to convert the associated calcium carbonate in low-grade sepiolite into calcium oxalate. The developed composite was subsequently used to remove Pb(II) from the aqueous solutions. The SMN-3 adsorbent prepared by heating in a water bath at 90 °C for 3 h (with a high specific surface area of 234.14 m2·g−1) revealed the maximum Pb(II) adsorption capacity of 504.07 mg·g−1 at pH 5, which was about five times higher than that of sepiolite (105.57 mg·g−1). Further, the SMN-3 adsorbent possessed a much higher selectivity for Pb(II) as compared to the other metal ions. Moreover, the residue was noted to be stable and safe. The adsorption kinetics and isotherms conformed to the quasi-second-order kinetic and Langmuir models. During the adsorption process, ion exchange was noted to the main mechanism, however, it was also accompanied by electrostatic attraction. This study provides a novel strategy for the sustainable development of simple and efficient adsorbents by utilizing low-grade clay minerals.

Construction of a Three-Dimensional Interpenetrating Network Sponge for High-Efficiency and Cavity-Enhanced Solar-Driven Wastewater Treatment

It is well known that the photothermal conversion performance of solar-driven interfacial water evaporation systems is known to have a stronger photothermal conversion performance than suspended water evaporation systems due to their relatively strong ability to suppress overall heat loss. Natural polymer chitosan and gelatin can form a three-dimensional interpenetrating network (IPN) sponge to provide an interface for water evaporation due to strong hydrogen bonding and electrostatic attraction interaction. However, the lack of effective light absorption, the intrinsic short lifetime, and the poor photothermal conversion greatly compromise their steam generation performance. Here, we fabricated a chitosan/gelatin-based IPN sponge incorporated with melanin-coated titania hollow nanospheres (CG@MPT-h) as a solar thermal converter, which is designed to exhibit a unique cavity structure and vertical channels. The cavity structure of melanin-coated titania acts as a solar thermal transducer, while the chitosan/gelatin-based IPN sponge acts as a single-pass water pump. A water hyacinth-inspired evaporation system shows outstanding steam generation performance, and the highest steam generation rate was 3.17 kg m^-2 h^-1 under a 2.5 sun illumination because of the cavity enhancement effect, far above TiO₂ particles and reported photo-thermal conversion materials. More importantly, the embedding of MPT-h nanoparticles in the IPN sponge effectively inhibits the growth of bacteria in the vertical channels, resulting in an antibacterial solar-driven water evaporator. This advanced sponge provides a cost-effective and practical sustainable energy technique for solar-driven wastewater treatment.

Advanced Functional Nanostructures based on Magnetic Iron Oxide Nanomaterials for Water Remediation: A Review

The fast growth of industrialization combined with the increasing population has led to an unparalleled demand for providing water in a safe, reliable, and cost-effective way, which has become one of the biggest challenges of the twenty-first century faced by global society. The application of nanotechnology in water treatment and pollution cleanup is a promising alternative in order to overcome the current limitations. In particular, the application of magnetic iron oxide nanoparticles (MIONs) for environmental remediation has currently received remarkable attention due to its unique combination of physicochemical and magnetic properties. Given the broadening use of these functional engineered nanomaterials, there is a growing concern about the adverse effects upon exposure of products and by-products to the environment. This makes vitally relevant the development of green chemistry in the synthesis processes combined with a trustworthy risk assessment of the nanotoxicity of MIONs as the scientific knowledge of the potential hazard of nanomaterials remains limited. This work provides comprehensive coverage of the recent progress on designing and developing iron oxide-based nanomaterials through a green synthesis strategy, including the use of benign solvents and ligands. Despite the limitations of nanotoxicity and environmental risks of iron oxide-based nanoparticles for the ecosystem, this critical review presents a contribution to the emerging knowledge concerning the theoretical and experimental studies on the toxicity of MIONs. Potential improvement of applications of advanced iron oxide-based hybrid nanostructures in water treatment and pollution control is also addressed in this review.

Carbon Nanotubes-Sponge Modified Electro Membrane Bioreactor (EMBR) and Their Prospects for Wastewater Treatment Applications

A novel membrane bioreactor system utilizes Multi-Walled Carbon Nanotubes (MWCNTs) coated polyurethane sponge (PUs), an electrical field, and a nanocomposite membrane has been successfully designed to diminish membrane with fouling caused by activated sludge. The classical phase inversion was harnessed to prepare Zinc Oxide/Polyphenylsulfone (ZnO/PPSU) nanocomposite membranes using 1.5 g of ZnO nanoparticles (NPs). The prepared nanocomposite membrane surface was fully characterized by a series of experimental tools, e.g., Scanning electron microscope (SEM), Atomic force microscopy (AFM), contact angle (CA), pore size, and pore size distribution. The testing procedure was performed through an Activated Sludge-Membrane Bioreactor (ASMBR) as a reference and results were compared with those obtained with nanotubes coated sponge-MBR (NSMBR) and nanotubes coated sponge-MBR in the presence of an electrical field (ENSMBR) system. Observed fouling reduction of the membrane has improved significantly and, thus, the overall long-term was increased by 190% compared with the control ASMBR configuration. The experimental results showcased that sponge-carbon nanotubes (CNTs) were capable of adsorbing activated sludge and other contaminants to minimize the membrane fouling. At a dosage of 0.3 mg/mL CNT and 2 mg/mL of SDBS, the sponge-CNT was capable of eliminating nitrogen and phosphorus by 81% and >90%, respectively.

An optimized mesoporous silica nanosphere-based carrier system with chemically removable Au nanoparticle caps for redox-stimulated and targeted drug delivery

To date, numerous drug delivery systems based on mesoporous silica nanoparticles (MSNs) have been explored, but little has been done on optimizing the structure and composition of MSNs to achieve effective drug delivery for cancer cells. Ideal mesoporous drug carriers should incorporate drugs in a way that prevents pre-release in biological surroundings before reaching the targeted area, which usually requires the capping of the open ends on the surface and the incorporation of targeting ligands on the exterior of nanocarriers. In this study, an MSN-based drug carrier system was synthesized with biocompatible Au nanoparticles (NPs) as the 'hard caps', and folic acid conjugated to the surface for targeting folate receptor-overexpressed cancer cells. Disulfide bonds linking Au and MSN NPs were introduced to the MSN surface as the redox-sensitive and chemically removable components. To study the effect of structures of MSNs in drug release, three types of MSNs were compared, including hollow mesoporous silica NPs, large-pore hollow mesoporous silica NPs and typical nano-sized pores on the surface (MSN). To achieve optimal coverage of thiol groups, two methods of functionalization were compared in effecting drug loading and release in vitro. Finally, the effect of residual surfactant was also discussed in anticancer studies. Therefore, the appropriate MSN nanostructure for redox-sensitive and targeted drug delivery was optimized.

A high-efficiency ammonia-responsive solar evaporator

The use of solar evaporators, which are capable of purifying water through solar energy, is a potentially attractive solution to relieve the world-wide water shortage problem. However, there may be toxic and volatile substances, such as ammonia, in water bodies, which could be evaporated along with water during the evaporation process, causing contamination of the purified water. In this work, we report an efficient ammonia responsive high-efficiency solar evaporator based on the titanium dioxide nanoparticle (TiO₂NP) and polypyrrole nanoparticle (PPyNP) composite. Owing to the synergistic effect between the photo-induced hydrophilicity of the TiO₂NPs and the photothermal effect of the PPyNPs, the solar evaporator is able to transport and evaporate water with an efficiency as high as 97.3% and an evaporation rate of 2.9 kg m^-2 h^-1 (under 2 sun irradiation). Interestingly, due to the ammonia responsiveness, the solar evaporator acts smartly and stops working in the presence of ammonia, thus avoiding the evaporation of this contaminant. In addition, the current solar evaporator is capable of degrading organic pollutants (e.g. dyes), which relies on the photocatalytic activity of TiO₂NPs. We thus believe that the ammonia responsive solar evaporator reported in the current study may have great potential in the practical field.

Nanomaterials with Tailored Magnetic Properties as Adsorbents of Organic Pollutants from Wastewaters

Water quality has become one of the most critical issue of concern worldwide. The main challenge of the scientific community is to develop innovative and sustainable water treatment technologies with high efficiencies and low production costs. In recent years, the use of nanomaterials with magnetic properties used as adsorbents in the water decontamination process has received considerable attention since they can be easily separated and reused. This review focuses on the state-of-art of magnetic core–shell nanoparticles and nanocomposites developed for the adsorption of organic pollutants from water. Special attention is paid to magnetic nanoadsorbents based on silica, clay composites, carbonaceous materials, polymers and wastes. Furthermore, we compare different synthesis approaches and adsorption performance of every nanomaterials. The data gathered in this review will provide information for the further development of new efficient water treatment technologies.

Low-Temperature Synthesis of Magnetic Carbonaceous Materials Coated with Nanosilica for Rapid Adsorption of Methylene Blue

This work reports the synthesis of nanosilica-coated magnetic carbonaceous adsorbents (MCA@SiO₂) using low-temperature hydrothermal carbonization technique (HCT) and the feasibility to utilize it for methylene blue (MB) adsorption. Initially, a carbon precursor (CP) was synthesized from corn starch under saline conditions at 453 K via HCT followed by the magnetization of CP again via HCT at 453 K. Subsequently, MCA was coated with silica nanoparticles. MCA and MCA@SiO₂ were characterized using X-ray diffraction, Fourier transform infrared, scanning electron microscopy/energy-dispersive spectroscopy, transmission electron microscopy, and Brunauer-Emmett-Teller (BET) N₂ adsorption-desorption isotherms. The BET surface area of MCA and MCA@SiO₂ were found to be 118 and 276 m² g^-1, respectively. Adsorption of MB onto MCA@SiO₂ was performed using batch adsorption studies and in the optimum condition, MCA@SiO₂ showed 99% adsorption efficiency with 0.5 g L^-1 of MCA@SiO₂ at pH 7. Adsorption isotherm studies predicted that MB adsorption onto MCA@SiO₂ was homogeneous monolayer adsorption, which was best described using a Langmuir model with the maximum adsorption capacity of 516.9 mg g^-1 at 25 °C. During adsorption kinetics, a rapid dye removal was observed which followed pseudo-first- as well as pseudo-second-order models, which suggested that MB dye molecules were adsorbed onto MCA@SiO₂ via both ion exchange as well as the chemisorption process. The endothermic and spontaneous nature of the adsorption of MB onto MCA@SiO₂ was established by thermodynamics studies. Mechanism of dye diffusion was collectively governed by intraparticle diffusion and film diffusion processes. Furthermore, MB was also selectively adsorbed from its mixture with an anionic dye, that is, methyl orange. Column adsorption studies showed that approximately 500 mL of MB having 50 mg L^-1 concentration can be treated with 0.5 g L^-1 of MCA@SiO₂. Furthermore, MCA@SiO₂ was repeatedly used for 20 cycles of adsorption-desorption of MB. Therefore, MCA@SiO₂ can be effectively utilized in cationic dye-contaminated wastewater remediation applications.

Flame Synthesis of Superhydrophilic Carbon Nanotubes/Ni Foam Decorated with Fe2O3 Nanoparticles for Water Purification via Solar Steam Generation

Solar-driven water evaporation has been proposed as a renewable and sustainable strategy for the generation of clean water from seawater or wastewater. To enable such technologies, development of photothermal materials that enable efficient solar steam generation is essential. The current challenge is to manufacture such photothermal materials cost-effectively and at scale. Furthermore, the photothermal materials should be strongly hydrophilic and environmentally stable. Herein, we demonstrate facile and scalable fabrication of carbon nanotube (CNT)-based photothermal nanocomposite foam by igniting an ethanol solution of ferric acetylacetonate [Fe(acac)₃] absorbed within nickel (Ni) foam under ambient conditions. The Fe(acac)₃ precursor provides carbon and the zero-valent iron catalyst for growing CNTs on the Ni foam, while ethanol facilitates the dispersion of Fe(acac)₃ on the Ni foam and supplies heat energy for the growth of CNTs by its burning. A forest of dense and uniform CNTs decorated with Fe₂O₃ nanoparticles is generated within seconds. The resultant Fe₂O₃/CNT/Ni nanocomposite foam exhibits "superhydrophilicity" and high light absorption capacity, ensuring rapid transport and fast evaporation of water within the entire foam. Efficient light-to-heat conversion causes the surface temperature of the foam to reach ∼83.1 °C under 1 sun irradiation. The average water evaporation rates of such foam are as high as ∼1.48 and ∼4.27 kg m^-2 h^-1 with light-to-heat conversion efficiencies of ∼81.3 and ∼93.8% under 1 sun and 3 sun irradiation, respectively. Moreover, the versatile and scalable combustion synthesis strategy presented here can be realized on various substrates, exhibiting high adaptability for different applications.

Fabrication of Nanostructured Polyamic Acid Membranes for Antimicrobially Enhanced Water Purification

Water scarcity and quality challenges facing the world can be alleviated by Point-of-Use filtration devices (POU). The use of filtration membranes in POU devices has been limited largely because of membrane fouling, which occurs when suspended solids, microbes, and organic materials are deposited on the surface of filtration membranes significantly decreasing the membrane lifespan, thereby increasing operation costs. There is need therefore to develop filtration membranes that are devoid of these challenges. In this work, nanotechnology was used to fabricate nanostructured polyamic acid (nPAA) membranes, which can be used for microbial decontamination of water. The PAA was used as support and reducing agent to introduce silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) with antimicrobial properties. The nPAA membranes were fabricated via thermal and wet phase inversion technique and then tested against Escherichia coli and Staphylococcus aureus following standard tests. The resulting nanoparticles exhibited excellent dispersibility and stability as indicated by the color change of the solution and increments of optical density at 415 nm for AgNPs and 520 nm for AuNPs. The wet phase inversion process used produced highly porous, strong, and flexible nPAA membranes, which showed well-dispersed spherical AuNPs and AgNPs whose rough average size was found to be 35 nm and 25 nm, respectively. The AgNPs demonstrated inhibition for both gram positive E. coli and gram negative S. aureus, with a better inhibitory activity against S. aureus. A synergistic enhancement of AgNPs antimicrobial activity upon AuNPs addition was demonstrated. The nPAA membranes can thus be used to remove microbials from water and can hence be used in water purification.

Phenanthroline-Based Polyarylate Porous Membranes with Rapid Water Transport for Metal Cation Separation

The selective separation of ions in terms of extremely similar size and properties remains an important challenge in water purification. We innovated a kind of porous nanofilm via interfacial polymerization using rigid heterocyclic ligands to achieve high valent cation selectivity and rapid water/ion transport. The interconnected microporosity and uniformly distributed cation-affinitive sites of the ultrathin membranes enabled water permeation (7.5 L m^-2 h^-1 bar^-1), ion permeance of Na⁺ (1.5 mol m^-2 h^-1 bar^-1), and Mg²⁺/Na⁺ permselectivity (2.1) during nanofiltration. The forward osmosis exhibited a prominent water flux of 95 LMH at 1 M NaCl draw solution, which expanded various applications. The polyarylate membranes comprising 4,7-diphenyl-1,10-phenanthroline showed a higher water permeation and ion selectivity than the planar monomers, e.g., resorcinol. A distinct fluorescence responsiveness existed between membranes and cations for the interaction characterization. Host-guest nuclear magnetic resonance (NMR) spectroscopy and solid-state nuclear magnetic resonance spectroscopy characterized the preferential affinitive of divalent/high-valent cations in the interconnected microporous powders; an ultraviolet spectrophotometer characterized the light responsiveness of the porous nanofilms. Such an active membrane has potential applications in selective separation and adsorption of cations, photocatalytic materials, photosensors, and other fields.

Nanotechnology-based sorption and membrane technologies for the treatment of petroleum-based pollutants in natural ecosystems and wastewater streams

Petroleum processing wastewater (PPW) is a complex mixture of free, soluble, and emulsive hydrocarbons that often contain heavy metals and/or solid particles. As these hazardous constituents can accumulate in human beings and the environment, exposure to the PPW can have harmful effects in various respects. The use of environmental nanotechnologies (E-Nano) is considered an attractive option to resolve the problems associated with PPW. Among different treatment technologies, E-Nano-based sorption (adsorption/absorption) and membrane filtration approaches have been proven to have outstanding efficacy in remediation of PPW pollutants. It is, however, crucial to determine the appropriate technological option (e.g., low-cost operational conditions) for the practical application of such technologies. In this review, the potential of E-Nano-based sorption and membrane technologies in the treatment of various PPW pollutants is discussed based on their performances in comparison to traditional technologies. Their suitability is evaluated further in relation to their merits/disadvantages and economic feasibility with the goal of constructing a perspective map to efficiently implement the E-Nano technologies.

Construction of a hierarchical-structured MgO-carbon nanocomposite from a metal–organic complex for efficient CO2 capture and organic pollutant removal

A hierarchical-structured porous MgO/C nanocomposite derived from a metal–organic complex performs as a remarkable adsorbent for CO₂ adsorption and organic pollutant removal.

Porous reduced graphene oxide/nickel foam for highly efficient solar steam generation

Solar-driven water evaporation is considered to be an effective method for seawater desalination and wastewater purification. Here, we report a novel solar steam generation (SSG) system based on reduced graphene oxide (rGO)/nickel foam. Porous rGO foam acting as a photothermal conversion layer is fabricated by coating the rGO microsheets on the metallic nickel foam. The porous structure shows a rough surface, which can improve the harvest of light by scattering effect. On the other hand, the porous structure ensures the rapid flow of steam in the evaporation process. This SSG system based on rGO/nickel foam converts the absorbed solar energy into heat energy at the water-air interface and can effectively evaporate (∼83.4%) under low irradiation of 1 sun (1 kw m^-2). The system shows great potential for the practical applications of water treatment at large-scale because of the high efficiency, simple preparation method and low cost.

Insights into the interplay of wetting and transport in mesoporous silica films

The understanding and design of wetting-transport and wetting-charge-transport interplay in nanometer-sized pores is a still not fully understood key step in improving nanopore transport-related applications. A control of mesopore wettability accompanied by pore filling and ionic mesopore accessibility analysis is expected to deliver major insights into this interplay of nanoscale pore wetting and transport. For a systematic understanding, we demonstrate a gradual adjustment of nanopore ionic accessibility by gradually tuning silica nanopore wettability using chemical vapor phase deposition of 1H,1H,2H,2H-perfluorooctyl dimethylchlorosilane. The mutual influence of wetting on liquid imbibition, condensation, and molecular transport as well as on heat transfer were studied by ellipsometry, cyclic voltammetry and boiling experiments, respectively. A multi-methodical analytic approach was used to directly couple wetting properties of mesoporous silica thin films to ionic mesopore accessibility allowing us to determine two different ion transport mechanisms based on three defined wetting regimes as well as a threshold hydrophobicity suppressing pore accessibility. Furthermore, boiling experiments showed a clear increase in nucleation site density upon changing the wettability of the mesoporous surfaces from hydrophilic to hydrophobic. Hence, these results provide insights into the complex interplay of pore wall functionalization, wetting, and charge-dependent nanopore properties.

Recent advances in the application of silica nanostructures for highly improved water treatment: a review

The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.

Nanocarbon materials in water disinfection: state-of-the-art and future directions

Water disinfection practices are critical for supplying safe drinking water. Existing water disinfection methods come with various drawbacks, calling for alternative or complementary solutions. Nanocarbon materials (NCMs) offer unique advantages for water disinfection owing to their high antimicrobial activity, often low environmental/human toxicity, and tunable physicochemical properties. Nevertheless, it is a challenge to assess the research progress made so far due to the structure and property diversity in NCMs as well as their different targeted applications. Because of these, here we provide a broad outline of this emerging field in three parts. First, we introduce the antimicrobial activities of the different types of NCMs, including fullerenes, nanodiamonds, carbon (nano)dots, carbon nanotubes, and graphene-family materials. Next, we discuss the current status in applying these NCMs for different water disinfection problems, especially as hydrogel filters, filtration membranes, recyclable aggregates, and electrochemical devices. We also introduce the use of NCMs in photocatalysts for photocatalytic water disinfection. Lastly, we put forward the key hurdles of the field that hamper the realization of the practical applications and propose possible directions for future investigations to address those. We hope that this minireview will encourage researchers to tackle these challenges and innovate NCM-based water disinfection platforms in the near future.

Hybrid nanocomposite curcumin-capped gold nanoparticle-reduced graphene oxide: Anti-oxidant potency and selective cancer cytotoxicity

Nanotechnology-based antioxidants and therapeutic agents are believed to be the next generation tools to face the ever-increasing cancer mortality rates. Graphene stands as a preferred nano-therapeutic template, due to the advanced properties and cellular interaction mechanisms. Nevertheless, majority of graphene-based composites suffer from hindered development as efficient cancer therapeutics. Recent nano-toxicology reviews and recommendations emphasize on the preliminary synthetic stages as a crucial element in driving successful applications results. In this study, we present an integrated, green, one-pot hybridization of target-suited raw materials into curcumin-capped gold nanoparticle-conjugated reduced graphene oxide (CAG) nanocomposite, as a prominent anti-oxidant and anti-cancer agent. Distinct from previous studies, the beneficial attributes of curcumin are employed to their fullest extent, such that they perform dual roles of being a natural reducing agent and possessing antioxidant anti-cancer functional moiety. The proposed novel green synthesis approach secured an enhanced structure with dispersed homogenous AuNPs (15.62 ± 4.04 nm) anchored on reduced graphene oxide (rGO) sheets, as evidenced by transmission electron microscopy, surpassing other traditional chemical reductants. On the other hand, safe, non-toxic CAG elevates biological activity and supports biocompatibility. Free radical DPPH inhibition assay revealed CAG antioxidant potential with IC50 (324.1 ± 1.8%) value reduced by half compared to that of traditional citrate-rGO-AuNP nanocomposite (612.1 ± 10.1%), which confirms the amplified multi-potent antioxidant activity. Human colon cancer cell lines (HT-29 and SW-948) showed concentration- and time-dependent cytotoxicity for CAG, as determined by optical microscopy images and WST-8 assay, with relatively low IC50 values (~100 μg/ml), while preserving biocompatibility towards normal human colon (CCD-841) and liver cells (WRL-68), with high selectivity indices (≥ 2.0) at all tested time points. Collectively, our results demonstrate effective green synthesis of CAG nanocomposite, free of additional stabilizing agents, and its bioactivity as an antioxidant and selective anti-colon cancer agent.

Zwitterionic Nanocellulose-Based Membranes for Organic Dye Removal

The development of efficient and environmentally-friendly nanomaterials to remove contaminants and pollutants (including harmful organic dyes) ravaging water sources is of major importance. Herein, zwitterionic nanocomposite membranes consisting of cross-linked poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) and bacterial nanocellulose (BNC) were prepared and tested as tools for water remediation. These nanocomposite membranes fabricated via the one-pot polymerization of the zwitterionic monomer, 2-methacryloyloxyethyl phosphorylcholine, within the BNC three-dimensional porous network, exhibit thermal stability up to 250 °C, good mechanical performance (Young's modulus ≥ 430 MPa) and high water-uptake capacity (627%-912%) in different pH media. Moreover, these zwitterionic membranes reduced the bacterial concentration of both gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) pathogenic bacteria with maxima of 4.3- and 1.8-log CFU reduction, respectively, which might be a major advantage in reducing or avoiding bacterial growth in contaminated water. The removal of two water-soluble model dyes, namely methylene blue (MB, cationic) and methyl orange (MO, anionic), from water was also assessed and the results demonstrated that both dyes were successfully removed under the studied conditions, reaching a maximum of ionic dye adsorption of ca. 4.4-4.5 mg g-1. This combination of properties provides these PMPC/BNC nanocomposites with potential for application as antibacterial bio-based adsorbent membranes for water remediation of anionic and cationic dyes.

Selective heavy metal removal and water purification by microfluidically-generated chitosan microspheres: Characteristics, modeling and application

Many industrial wastewater streams contain heavy metals, posing serious and irreversible damage to humans and living organisms, even at low concentrations due to their high toxicity and persistence in the environment. In this study, high-performance monodispersed chitosan (CS) microspheres were prepared using a simple microfluidic method and evaluated for metal removal from contaminated water. Batch experiments were carried out to evaluate the adsorption characteristics for the removal of copper ions, one representative heavy metal, from aqueous solutions. The inherent advantages of microfluidics enabled a precise control of particle size (CV = 2.3%), while exhibiting outstanding selectivity towards target ions (adsorption capacity 75.52 mg g^-1) and fair regeneration (re-adsorption efficiency 74% after 5 cycles). An integrated adsorption mechanism analytic system was developed based on different adsorption kinetics and isotherms models, providing an excellent adsorption prediction model with pseudo-second order kinetics (R² = 0.999), while the isotherm was fitted best to the Langmuir model (R² = 0.998). The multi-step adsorption process was revealed via quantitative measurements and schematically described. Selective adsorption performance of CS microspheres in the present of other competitive metal ions with different valence states has been demonstrated and studied by both experimental and density functional theory (DFT) analysis.

Engineered nanomaterials for water decontamination and purification: From lab to products

Clean water is vital for life; it is required not only for drinking but also for the preparation of food and proper hygiene. Unfortunately, more than fifty percent of the world population mainly in China and India face a severe scarcity of water. Around 1.8 billion people inevitably drink water from sources having fecal contamination resulting in the death of about a million children every year. Scientists are developing various economic technologies to decontaminate and purify water. Nanomaterials-based technology offers an economic and effective alternative for water purification and decontamination. As nanomaterials are available globally, have remarkable antimicrobial activity and the ability to effectively remove organic and inorganic pollutants from water. This review discusses the potential role of nanomaterials in the purification of drinking water. As nanomaterials exhibit remarkable antimicrobial and antiparasitic activities against waterborne pathogens and parasites of primary concern like Shigella dysenteriae, Vibrio cholera, and Entamoeba histolytica. Nanomaterials also demonstrate the ability to absorb toxic chemicals like mercury and dyes from polluted water. However, for successful commercialization of the technology, some inherent bottlenecks need to be addressed adequately. These include nanoparticles aggregation, their seepage into drinking water and adverse effects on human health and the environment. Nanocomposites are being developed to overcome these problems and to combine two or more desirable properties for water purification. Widespread and large-scale use of nanomaterials for water purification soon may become a reality. Products containing nanomaterials such as Karofi, Lifestraw, and Tupperware for water purification are already available in the market.