Synthesis and Anticancer Activity Evaluation of Self- assembled Curcumin Loaded Gelatin - Oleic acid - Carboxymethyl Chitosan Nanoparticles on MCF-7 cells

Curcumin (CUR) is a natural herb with known anticancer effects against many malignancies such as breast cancer. However, CUR is poorly water-soluble and suffers from low bioavailability, and its delivery to breast cancer through oral administration is interrupted by early release and degradation before reaching the target site. So, this study aimed to develop an oral breast cancer-targeted drug delivery system (DDS) using a combination of biopolymers like mucoadhesive carboxymethyl chitosan, oleic acid and gelatin to create biopolymer-mediated nanoparticles (NPs) for the delivery of hydrophobic CUR. Gelatin-Oleic acid-Carboxymethyl chitosan (GOC) readily self-assembles into nanoparticles (GOCNPs) using the desolvation process. Such self-assembled DDS based on biopolymers without any crosslinkers for the preparation present controlled drug release and enhanced anticancer efficacy compared to existing systems. The prepared GOCNPs were characterized by FTIR, 1HNMR, XRD, SEM, HRTEM, DLS, and Zeta analysis. The DDS's maximum drug loading efficiency (DLE) and encapsulation efficiency (EE) values at pH 4.0 were 78.0 ± 2.34 % and 94.0 ± 2.8 %, respectively. The CUR-loaded GOCNPs shows a 90.0 ± 2.6 % CUR release at pH 5.5, while the release percentage of CUR at pH 7.4 was only 37.0 ± 1.06 %. According to the MTT data, CUR-GOCNPs show significant cytotoxicity to MCF-7 cells, showed a cell viability of 20.16 % towards MCF-7 cancer cells and loading of CUR to the GOCNPs notably increased its anticancer activity as the IC50 of CUR-GOCNPs was significantly lowered (6.880 µg/mL against MCF-7 in 24 h analysis). Studies on drug release kinetics, cytotoxicity, apoptosis, hemocompatibility, swelling, and in vivo pharmacokinetics were carried out to prove the effectiveness of the biopolymer-based nanoparticles developed as an effective oral delivery system for CUR. The future holds enormous possibilities for the clinical translation of prepared drug delivery system, as advances in controlled drug delivery continue to prove the design and capabilities of GOCNPs.

Microcapsule Techniques to Emphasize Functional Plant Oil Quality and Their Applications in the Food Industry: A Review

Natural functional plant oils (FPOs) have been widely exploited due to their abundant biological activities. However, when exposed to oxygen, light, moisture, and heat, some limitations such as oxidative deterioration, impaired flavor, loss of nutritional value and volatile compounds, and decreased shelf life hinder the widespread application of FPOs in the food industry. Notably, the microencapsulation technique is one of the advanced technologies, which has been used to maintain the biological and physicochemical properties of FPOs. The present review provided a comprehensive overview of the nutrient compositions and functionality of FPOs, preparation techniques for microcapsules, and applications of microencapsulated FPOs (MFPOs) in the food industry. FPOs obtained from a wide range of sources were abundant in bioactive compounds and possessed disease risk mitigation and improved human health properties. The preparation methods of microencapsulation technology included physical, chemical, and physicochemical methods, which had the ability to enhance oxidative stability, functional, shelf life, and thermostability properties of FPOs. In this context, MFPOs had been applied as a fortification in sausage, meat, bakery, and flour products. Overall, this work will provide information for academic fields and industries the further exploration of food and nutriment products.

Microstructure induction of quaternary ammonium chitosan microcapsules based on magnetic field and study of their aroma release

Traditional pressure-sensitive microcapsules used in textiles face challenges of insufficient environmental friendliness in the production process and uncontrollable fragrance release. To address this issue, this study utilized quaternary ammonium chitosan and silica as wall materials to develop a magnetic aromatic microcapsule. The microstructure of the microcapsules was controlled by magnetic field induction, and its evolution pattern was investigated. After magnetic field induction, the microcapsules exhibited a trend of evolving from spherical to asymmetrical shapes, accompanied by significant changes in mechanical properties. Asymmetrical microcapsules showed higher adhesion and lower stiffness. When applied to cotton textiles, the cotton textiles treated with asymmetrical microcapsules released 63.40 % of lavender essential oil after 200 friction cycles, representing an 11.3 % improvement in release efficiency compared to regular microcapsules, indicating better mechanical stimulus responsiveness. Additionally, in antibacterial tests, aromatic cotton exhibited a 96.52 % inhibition ratio against Escherichia coli. In summary, this study explores methods to adjust the mechanical properties of microcapsules and the relationship between mechanical properties and microstructure, providing a new approach for functional textiles.

Unveiling the Electrostatically Driven Collapsing and Relaxation of Polyelectrolyte-Colloid Complexes: A Tunable Pathway to Colloidal Assembly

Polyelectrolyte-colloid (PEC) complexes, ubiquitous across diverse fields, exhibit remarkable phase transitions, mimicking intricate biological assemblies. While the role of electrostatic forces in the PEC complex assembly is undeniable, achieving a holistic comprehension remains an elusive goal. This study unveils a fascinating phenomenon: the formation of highly collapsed coacervate structures in PEC complexes at elevated polyelectrolyte concentrations, followed by the swelling of complexes at even higher concentrations. Employing anionic silica colloids and cationic chitosan as a model system, small-angle X-ray/neutron (SAXS/SANS) elucidates the transition from a bead-on-a-necklace-like phase to a dense packed coacervate state (with volume fraction ∼0.62) until 3 wt % concentration of the polyelectrolyte. However, beyond 3 wt %, swelling of the dense collapsed assembly is observed. This structural evolution of PEC complexes as a function of chitosan concentration is attributed to the interplay of electrostatically driven interactions and the Donnan effect. Notably, the critical concentration for coacervation, Cs*, demonstrates a linear dependence on the initial colloid concentration. Interestingly, a complete expansion of the coacervate is observed at a high polyelectrolyte concentration, particularly for dilute colloid solutions (2 wt %). Furthermore, the addition of an electrolyte sheds light on the delicate interplay of forces. While a low electrolyte concentration partially screens charges, leading to a shift in phase diagram, higher concentrations trigger complete coacervate dissolution beyond the critical electrolyte concentration of 0.2 M, due to the complete screening of electrostatic charges.

Antimicrobial, antioxidant and cytocompatible coaxial wet-spun fibers made of polycaprolactone and cellulose acetate loaded with essential oils for wound care

Chronic wounds represent a serious worldwide concern, being often associated with bacterial infections. As the prevalence of bacterial infections increase, it is crucial to search for alternatives. Essential oils (EOs) constitute a promising option to antibiotics due to their strong anti-inflammatory, analgesic, antioxidant and antibacterial properties. However, such compounds present high volatility. To address this issue, a drug delivery system composed of coaxial wet-spun fibers was engineered and different EOs, namely clove oil (CO), cinnamon leaf oil (CLO) and tea tree oil (TTO), were loaded. Briefly, a coaxial system composed of two syringe pumps, a coagulation bath of deionized water, a cylindrical-shaped collector and a coaxial spinneret was used. A 10 % w/v polycaprolactone (PCL) solution was combined with the different EOs at 2 × minimum bactericidal concentration (MBC) and loaded to a syringe connected to the inner port, whereas a 10 % w/v cellulose acetate (CA) solution mixed with 10 % w/v polyethylene glycol (PEG) at a ratio of 90:10 % v/v (to increase the fibers' elasticity) was loaded to the syringe connected to the outer port. This layer was used as a barrier to pace the release of the entrapped EO. The CA's inherent porosity in water coagulation baths allowed access to the fiber's core. CA was also mixed with 10 % w/v polyethylene glycol (PEG) at a ratio of 90:10 % v/v (CA:PEG), to increase the fibers' elasticity. Microfibers maintained their structural integrity during 28 days of incubation in physiological-like environments. They also showed high elasticities (maximum elongations at break >300 %) and resistance to rupture in mechanical assessments, reaching mass losses of only ≈ 2.29 % - 57.19 %. The EOs were released from the fibers in a prolonged and sustained fashion, in which ≈ 30 % of EO was released during the 24 h of incubation in physiological-like media, demonstrating great antibacterial effectiveness against Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Pseudomonas aeruginosa, the most prevalent bacteria in chronic wounds. Moreover, microfibers showed effective antioxidant effects, presenting up to 59 % of reduction of 2,2-diphenyl-1-picrylhydrazyl (DPPH) activity. Furthermore, the coaxial system was deemed safe for contact with fibroblasts and human keratinocytes, reaching metabolic activities higher than 80 % after 48 h of incubation. Data confirmed the suitability of the engineered system for potential therapeutics of chronic wounds.

Novel L-(CaP-ZnP)/SA Nanocomposite Hydrogel with Dual Anti-Inflammatory and Mineralization Effects for Efficient Vital Pulp Therapy

Background

Vital pulp therapy (VPT) is considered a conservative treatment for preserving pulp viability in caries and trauma-induced pulpitis. However, Mineral trioxide aggregate (MTA) as the most frequently used repair material, exhibits limited efficacy under inflammatory conditions. This study introduces an innovative nanocomposite hydrogel, tailored to simultaneously target anti-inflammation and dentin mineralization, aiming to efficiently preserve vital pulp tissue.

Methods

The L-(CaP-ZnP)/SA nanocomposite hydrogel was designed by combining L-Arginine modified calcium phosphate/zinc phosphate nanoparticles (L-(CaP-ZnP) NPs) with sodium alginate (SA), and was characterized with TEM, SEM, FTIR, EDX, ICP-AES, and Zeta potential. In vitro, we evaluated the cytotoxicity and anti-inflammatory properties. Human dental pulp stem cells (hDPSCs) were cultured with lipopolysaccharide (LPS) to induce an inflammatory response, and the cell odontogenic differentiation was measured and possible signaling pathways were explored by alkaline phosphatase (ALP)/alizarin red S (ARS) staining, qRT-PCR, immunofluorescence staining, and Western blotting, respectively. In vivo, a pulpitis model was utilized to explore the potential of the L-(CaP-ZnP)/SA nanocomposite hydrogel in controlling pulp inflammation and enhancing dentin mineralization by Hematoxylin and eosin (HE) staining and immunohistochemistry staining.

Results

In vitro experiments revealed that the nanocomposite hydrogel was synthesized successfully and presented desirable biocompatibility. Under inflammatory conditions, compared to MTA, the L-(CaP-ZnP)/SA nanocomposite hydrogel demonstrated superior anti-inflammatory and pro-odontogenesis effects. Furthermore, the nanocomposite hydrogel significantly augmented p38 phosphorylation, implicating the involvement of the p38 signaling pathway in pulp repair. Significantly, in a rat pulpitis model, the L-(CaP-ZnP)/SA nanocomposite hydrogel downregulated inflammatory markers while upregulating mineralization-related markers, thereby stimulating the formation of robust reparative dentin.

Conclusion

The L-(CaP-ZnP)/SA nanocomposite hydrogel with good biocompatibility efficiently promoted inflammation resolution and enhanced dentin mineralization by activating p38 signal pathway, as a pulp-capping material, offering a promising and advanced solution for treatment of pulpitis.

Development of smart packaging film incorporated with sodium alginate-chitosan quaternary ammonium salt nanocomplexes encapsulating anthocyanins for monitoring milk freshness

This study focused on the preparation, functionality, and application of smart food packaging films based on polyvinyl alcohol (PVA) and anthocyanins (ACNs) -loaded sodium alginate-chitosan quaternary ammonium salt (HACC-SA) nanocomplexes. The average encapsulation rate of anthocyanins-loaded nanocomplexes reached 62.51 %, which improved the hydrophobicity and water vapor barrier of the PVA film. FTIR confirmed that the nanocomplexes were immobilized in the PVA film matrix by hydrogen bonding, which improved the mechanical properties of the film. The SEM and XRD results demonstrated that the HACC-SA-ACNs nanocomplexes were uniformly distributed in the film matrix and the crystallinity of PVA was decreased. The P/HACC-SA-ACNs film showed a significant response to buffers of pH 2-13 and high color stability after 21 days of storage compared to the P/ACNs film. Furthermore, the color of the composite film changed from purple to red as the milk freshness decreased during 72 h of milk freshness monitoring, indicating that the P/HACC-SA-ACNs films were suitable and promising for application as smart packaging materials.

Effects of Seven Plant Essential Oils on the Growth, Development and Feeding Behavior of the Wingless Aphis gossypii Glover

Cotton aphid Aphis gossypii Glover damages plants such as cotton directly by feeding on leaves and indirectly by transmitting viruses and excreting honeydew, which interferes with photosynthesis. The control of A. gossypii is still dominated by the frequent use of insecticides, which leads to a gradual increase in pesticide resistance in A. gossypii. Research is therefore needed on non-pesticide controls. In this study, seven plant essential oils (EOs) of Ocimum sanctum L., Ocimum basilicum L., Ocimum gratissimum L., Mentha piperita L., Mentha arvensis L., Tagetes erecta L., and Lavandula angustifolia Mill. were examined as potential controls for A. gossypii. We used life tables and electrical penetration graphs (EPG) to explore the effects of these EOs on the growth, development, and feeding behavior of A. gossypii, followed by a study of effects of the EOs on honeydew secretion by A. gossypii as a measure of their antifeedant activity. We found that the EOs of O. sanctum, M. piperita, M. arvensis and T. erecta significantly extended the pre-adult developmental period. Also, adult longevity, number of oviposition days, and total fecundity of A. gossypii treated with the EOs of M. arvensis or T. erecta were all significantly reduced. Aphids treated with the EOs of O. sanctum, M. piperita, or L. angustifolia showed significant reductions in their net reproductive rate (R0), intrinsic rate of increase (rm), and finite rate of increase (λ), and significant increases in mean generation time (T). In terms of their effects on the feeding behavior of A. gossypii, all seven EOs significantly reduced the total duration of phloem feeding (E2 waves), the number of phloem-feeding bouts, and the proportion of time spent in secretion of saliva into phloem sieve elements (E1 waves) and phloem feeding (E2). The total duration and number of E1 waves (saliva secretion) were significantly reduced by the EOs of O. sanctum, O. gratissimum, and M. arvensis. For C waves (probing in non-vascular tissues), the total duration spent in this behavior was significantly increased by the EOs of O. gratissimum, M. piperita, and L. angustifolia, but the number of such probing events was increased only by L. angustifolia EO. The EOs of O. basilicum, M. arvensis, and T. erecta significantly increased the total duration of ingestion of xylem sap (G waves), while the total time of mechanical difficulty in stylet penetration (F waves) was increased by M. arvensis. The total duration and number of the non-probing events (Np waves) were significantly increased by EOs of O. sanctum and O. basilicum. After treatment with all seven of these EOs, the area covered by honeydew was significantly reduced compared with the control. Studies have analyzed that EOs of O. sanctum, M. piperita, and T. erecta were most effective, followed by the EOs of M. arvensis and L. angustifolia, and finally the EOs of O. basilicum and O. gratissimum. In the present study, the EOs of O. sanctum, M. piperita, and T. erecta were found to have potential for the development as antifeedants of A. gossypii, and these data provide a basis for future research on non-pesticide chemical control of A. gossypii.

Quaternary-ammonium chitosan, a promising packaging material in the food industry

Quaternary-ammonium chitosan (QAC) is a polysaccharide with good water solubility, bacteriostasis, and biocompatibility. QAC is obtained by methylating or grafting the quaternary-ammonium group of chitosan and is an important compound in the food industry. Various QAC-based complexes have been prepared using reversible intermolecular interactions, such as electrostatic interactions, hydrogen bonding, metal coordination, host-guest interactions, and covalent bonding interactions consisting of Schiff base bonding and dynamic chemical bond cross-linking. In the food industry, QAC is often used as a substrate in film or coating for food preservation and as a carrier for active substances to improve the encapsulation efficiency and storage stability of functional food ingredients. In this review, we have assimilated the latest information on QAC to facilitate further discussions and future research. Advancement in research on QAC would contribute toward technology acceleration and its increased contribution to the field of food technology.

Alginate biopolymeric structures: Versatile carriers for bioactive compounds in functional foods and nutraceutical formulations: A review

Alginate-based biopolymer products have gained attention for protecting and delivering bioactive components in nutraceuticals and functional foods. These naturally abundant anionic, unbranched, and linear copolymers are also produced commercially by microorganisms. Alone or in combination with other copolymers, they efficiently transport bioactive molecules in food and nutraceutical products. This review aims to provide an in-depth understanding of alginate-based products and structures, emphasizing their role in delivering functional molecules in various formulations and delivery systems. These include edible coatings/films, gels/emulsions, beads/droplets, microspheres/particles, and engineered nanostructures where alginates have been used potentially. By exploring these applications, readers gain insights into the benefits of these products. Because, alginate-based biopolymer products have shown promise in delivering bioactive compounds like vitamin C, vitamin D3, curcumin, β-carotene, resveratrol, folic acid, gliadins, caffeic acid, betanin, limonoids, quercetin, several polyphenols and essential oils, etc., which are chief contributors to treating specific/overall nutritional and chronic metabolic disorders. So, this review summarizes the potential of alginate-based structures/products in various forms for delivering a wide range of functional food ingredients and nutraceutical components that offer promising perspectives for future investigations.

Insight on Incorporation of Essential Oils as Antimicrobial Substances in Biopolymer-Based Active Packaging

The increasing interest in microbiological food safety requires the development of sensitive and reliable analyses and technologies for preserving food products' freshness and quality. Different types of packaging systems are one of the solutions for controlling microbiological activity in foods. During the last decades, the development of biopolymer-based active packaging with essential oil incorporation systems has resulted in technologies with exceptional application potential, primarily in the food industry. There is no doubt that this principle can facilitate food status monitoring, reduce food waste, extend the shelf life, improve the overall quality of food, or indicate a larger problem during the storage, production, and distribution of foodstuffs. On the other hand, most antimicrobial packaging systems are in the development phase, while the sensitivity, selectivity, complexity, and, above all, safety of these materials are just some of the essential questions that need to be answered before they can be widely used. The incorporation of essential oils as antimicrobial substances in biopolymer-based active packaging holds significant promise for enhancing food safety, extending shelf life, and offering more sustainable packaging solutions. While challenges exist, ongoing research and innovation in this field are likely to lead to the development of effective and environmentally friendly packaging systems with enhanced antimicrobial properties.

Enhancing the Antioxidant, Antibacterial, and Wound Healing Effects of Melaleuca alternifolia Oil by Microencapsulating It in Chitosan-Sodium Alginate Microspheres

In this study, antibacterial and antioxidant molecules-rich Melaleuca alternifolia oil (tea tree oil (TTO)) loaded chitosan (CS) based nanoemulsions (NEMs) were prepared and encapsulated by sodium alginate (SA) microsphere for antibacterial wound dressing. CS-TTO NEMs were prepared by oil-in-water emulsion technique, and the nanoparticle tracking analysis (NTA) confirmed that the CS-TTO NEMs had an average particle size of 89.5 nm. Further, the SA-CS-TTO microsphere was confirmed through SEM analysis with an average particle size of 0.76 ± 0.10 µm. The existence of TTO in CS NEMs and SA encapsulation was evidenced through FTIR analysis. The XRD spectrum proved the load of TTO and SA encapsulation with CS significantly decreased the crystalline properties of the CS-TTO and SA-CS-TTO microsphere. The stability of TTO was increased by the copolymer complex, as confirmed through thermal gravimetric analysis (TGA). Furthermore, TTO was released from the CS-SA complex in a sustained manner and significantly inhibited the bacterial pathogens observed under confocal laser scanning microscopy (CLSM). In addition, CS-TTO (100 µg/mL) showed antioxidant potential (>80%), thereby increasing the DPPH and ABTS free radicals scavenging ability of SA-CS-TTO microspheres. Moreover, CS and SA-CS-TTO microsphere exhibited negligible cytotoxicity and augmented the NIH3T3 cell proliferation confirmed in the in vitro scratch assay. This study concluded that the SA-CS-TTO microsphere could be an antibacterial and antioxidant wound dressing.

Temperature controlled microcapsule loaded with Perilla essential oil and its application in preservation of peaches

In this study, Perilla frutescens essential oil (PEO) loaded microcapsules (PEOM) were successfully prepared and their thermal stability, temperature-responsive releasing effect, antioxidant activity, antibacterial activity, and preservation of peach were systematically investigated. PEOM showed excellent encapsulation efficiency (91.5%) with a core-shell ratio of 1.4:1 and exhibited high thermal stability, indicating that PEOM could effectively maintain PEO release rate. In vitro assays indicated that the optimal kinetic model for PEO release fitted well with first order with a diffusion mechanism. A high level of antioxidant and antibacterial activity of PEOM was maintained. In addition, owing to its sustained release, PEOM could prolong the shelf life of peaches significantly. Therefore, PEOM has potential application and development prospects in the field of food preservation.

Citral Essential Oil-Loaded Microcapsules by Simple Coacervation and Its Application on Peach Preservation

Citral essential oil (CEO) was encapsulated by the single coalescence method, and its stability, release properties, and ability to maintain freshness were evaluated for the first time. The microshape characteristics of a CEO-loaded microcapsule (CM) were analyzed by inverted microscopy (OM) and scanning electron microscopy (SEM). The encapsulation efficiency, stability, and release behavior of CEO were evaluated using Fourier transform infrared spectroscopy (FTIR), thermogravimetric/differential thermal comprehensive analysis (TG/DSC), and gas chromatography mass spectrometry (GC/MS). Moreover, peaches were used to evaluate the preservation properties of the CEO-loaded microcapsule. The results showed that the microcapsule produced using simple coacervation had better microstructure and the ability to reduce and control the release of citral essential oil. The qualities of peaches, such as appearance changes, hardness, soluble solid content, total acids, and total bacterial counts, were significantly improved in the CM system during storage, in comparison with the control and cold storage groups. Therefore, the CM has potential applications and development prospects in the food, drug, and other industries.

Sodium Alginate—Natural Microencapsulation Material of Polymeric Microparticles

From the multitude of materials currently available on the market that can be used in the development of microparticles, sodium alginate has become one of the most studied natural anionic polymers that can be included in controlled-release pharmaceutical systems alongside other polymers due to its low cost, low toxicity, biocompatibility, biodegradability and gelatinous die-forming capacity in the presence of Ca²⁺ ions. In this review, we have shown that through coacervation, the particulate systems for the dispensing of drugs consisting of natural polymers are nontoxic, allowing the repeated administration of medicinal substances and the protection of better the medicinal substances from degradation, which can increase the capture capacity of the drug and extend its release from the pharmaceutical form.

Optimization and characterization of a novel tea tree oil-integrated poly (ε-caprolactone)/soy protein isolate electrospun mat as a wound care system

A set of poly (ε-caprolactone)/soy protein isolate (PCL/SPI) mats with different ratios of PCL to SPI was fabricated using the electrospinning method. The mat with PCL to SPI ratio of 95:5 (PS 95:5) had the narrowest nanofibers, the highest percentage of porosity, the lowest swelling ratio, the least vapor transmission, and the slowest degradation rate among the prepared mats. The hemolysis assay indicated that all mats can be considered biocompatible biomaterials. In continue, three different weight ratios of tea tree oil (TTO) were loaded into the PS 95:5 mat. The release profiles illustrated that higher amounts of TTO could be released in an acidic environment. The antioxidant activity of the mats increased by the increase in their TTO content. The cell viability test, cell adhesion images, and live/dead assay of TTO-loaded mats affirmed that all fabricated mats were biocompatible. The scratch wound assay expressed that TTO accelerates the rate of wound closure. The TTO-loaded mats illustrated antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria. The obtained outcomes revealed that TTO-loaded PCL/SPI mats can be considered promising potential wound dressings.

Preparation, Characterization, and Application of Modified Starch/Chitosan/Sweet Orange Oil Microcapsules

Aquatic products have an important role in global agriculture, but the challenges associated with preservation have limited their marketability. Essential oil (EO), such as sweet orange oil (SOEO), has been widely used for preservation due to its excellent antibacterial ability. However, the volatilization of EO limits its application in food preservation. In this study, SOEO was extracted from sweet orange peel by steam distillation and then stored in microcapsules. The components of the microcapsules were as follows: the porous starch was chosen as an adsorbed substrate to store SOEO (PS/SOEO), and sodium alginate (SA) and chitosan (CMCS) were used as shell material to delay the volatilization of SOEO using the sharp pore coagulation method. Our results showed that the main antibacterial ingredients in SOEO were aldehydes (33.93%) and d-limonene (15.38%). The microcapsules were of an irregular shape (oval), and the size of the microcapsules was 1.2 ± 0.1 cm as measured by a digital micrometer. Scanning electron microscopy (SEM) results showed that there were a lot of pores on the surface of the starch after modification, but sodium alginate and chitosan could well encapsulate these pores. The results of Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis also showed that SOEO was successful encapsulated into the porous starch. The results of compression test and releasing kinetics studies suggested that CMCS and SA improved the mechanical and slow-releasing ability of SOEO microcapsules. The best antibacterial performance was obtained when 0.8 g of SOEO microcapsules was added. Finally, the shelf life of crawfish could be extended to 6 days by SOEO microcapsule (1/10 g, SOEO microcapsule/crawfish) under room temperature. These results provide a systematic understanding of the antibacterial capabilities of sweet orange essential oil microcapsules, which can contribute to the development of preservation methods for aquatic products.

Fibrous palygorskite clays as versatile nanocarriers for skin delivery of tea tree oils in efficient acne therapy

This paper presents a facile approach to develop palygorskite (Pal), a fibrous clay mineral, as a delivery system of tea tree oil (TTO) for topical acne therapy. The obtained TTO-Pal composite showed an efficient loading of TTO (27.4%) with a selective accumulation of terpine-4-ol and 1,8-cineole (two major antimicrobial TTO constituents), sustained release of TTO at skin physiological conditions (pH5.4, 32 °C) and superior skin sebum (2.2 g/g) absorbability. In vitro toxicological assessments showed that the Pal incorporation strategy significantly reduced the acute contact toxicity of TTO. The antimicrobial results revealed a preferable bacteriostatic effect for the TTO-Pal system towards opportunistic dermal pathogens (Escherichia coli, Staphylococcus aureus and Propionibacterium acnes) over the beneficial bacterium (Staphylococcus epidermis). Moreover, TTO-Pal based formulations exhibited pronounced clinical therapeutic efficacy in treating facial acne by rapidly reducing inflamed lesions, modulating skin sebum overproduction and restoring barrier function. This is the first report of using fibrous clay as a biocompatible nanocarrier system for topical delivery of essential oils in efficient management of facial acne with both in vitro and in vivo evidences, which may open perspectives for fibrous clay-drug delivery system in topical application and expand the high added value development of this mineral resource in the advanced healthcare fields.

Functionalization of mesoporous silica as an effective composite carrier for essential oils with improved sustained release behavior and long-term antibacterial performance

In this work, a novel composite carrier system for loading essential oils was developed by using tetraethyl orthosilicate (TEOS) and (3-aminopropyl) triethoxysilane (APTES) as silica precursors and cetyl trimethyl ammonium bromide (CTAB) as a template, and the resultant aminated mesoporous silica was further chemically modified by polyacrylic acid (PAA). The obtained composite carriers exhibited a high loading capability toward tea tree oil (TTO), and they also significantly improved the release behavior of TTO due to the steric hindrance of silica mesopore and the polymer restriction. Besides, it was found that the release behavior followed the First-Order kinetic model, revealing that the release of TTO was driven by the concentration gradient. In addition, these composite carriers with essential oil-loaded demonstrated remarkable antibacterial performance againstE. coliandS. aureus, and they could retain antibacterial performance even after 50 d. Moreover, the antibacterial mechanism was also elucidated with the assistance of nucleic acid and conductivity measurements. Therefore, this work provides a facile and environmentally friendly approach to preparing effective composite carriers for improving the sustained release of essential oils, and the long-term antibacterial performance of these essential oil-loaded composite carriers makes them tremendously potential for practical applications.

Rosin modified aminated mesoporous silica adsorbed tea tree oil sustained-release system for improve synergistic antibacterial and long-term antibacterial effects

Tea tree oil, a natural antibacterial compound, cannot be used effectively because of its volatile nature. In this work, a biocompatible carrier was prepared and loaded with tea tree essential oil. The carrier was prepared via the electrostatic or chemical action of aminated mesoporous silica and sodium rosin for achieving a low volatilization rate of tea tree essential oil. A synergistic antibacterial effect was observed between sodium rosin and tea tree essential oil. This method utilized the positive charge of the amino group and the condensation reaction with the carboxyl group to achieve physical and chemical interactions with sodium rosin. Fourier Transform Infrared, Brunauer-Emmet-Teller, Zeta potential, SEM, TEM, and TG were performed to characterize the structure and properties of the samples. Compared to the electrostatic effect, the chemically modified system exhibited a longer sustained release, and the sustained release curve followed the Korsmeyer-Peppas release model. Also, the antibacterial properties of the chemically modified system exhibited better minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) respectively, the MIC and MBC forE. coliwere 0.3 mg ml^-1and 0.6 mg ml^-1respectively, forS. aureuswere 0.15 mg ml^-1and 0.3 mg ml^-1respectively. More strikingly, the sample also demonstrated long-term antibacterial performance. Therefore, this work provides a new way for the delivery of volatile antibacterial drugs to achieve sustained-release and long-lasting antibacterial effects.

Therapeutic Potential of Melaleuca alternifolia Essential Oil in New Drug Delivery Systems

Medicinal plants produce secondary metabolites with special biological activities, which may be used as new therapeutic alternatives. For instance, tea tree essential oil (TTO) was shown to exert antimicrobial, antifungal, anthelmintic, antiviral, anti-tumor and anti-inflammatory activities. Due to their thermal instability, active principles can be easily degraded by physicochemical processes; therefore, they must be protected to increase their time of action and improve their controlled release. The aim of this review is to discuss formulations incorporating encapsulated TTO as the active ingredient. Micro and nanoencapsulated systems proved to be more thermostable than TTO and to exert better antimicrobial, antifungal, antiparasitic and larvicidal effects. Nanoencapsulation also reduced oil toxicity. Emulsified and hybrid systems developed by various methods showed improved repellent, antibacterial, antifungal and anti-inflammatory activities, thereby proving promising for the pharmaceutical industry. Liposomal formulations produced by hydration of lipid films exhibited constant rate of terpinen-4-ol release. In addition, their incorporation into biomaterials, such as sponges, nanofibers and films, showed great potential for treating infections. Mainly due to the advantages of their incorporation into new drug delivery systems over conventional formulations, there is an interest in the development of systems containing TTO as a pharmaceutical ingredient of plant origin.

In vitro and in vivo evaluation of gellan gum hydrogel films: Assessing the co impact of therapeutic oils and ofloxacin on wound healing

Herein, we report co-encapsulation of ofloxacin with tea tree or lavender oil in gellan gum based hydrogel films by solvent casting ionotropic gelation method as wound dressing. Prepared films were transparent, flexible, and displayed antioxidant activity with superior antibacterial response against common inhabitants of wound i.e. gram positive and negative bacteria. Solid-state characterization of optimized formulation (OL3 and OT3) revealed successful incorporation of drug and oils in hydrogel structure without any noticeable interaction. In vitro release studies showed an initial burst release but remaining portion released in controlled manner over 48 h from the films and furthermore, presence of oils did not affected the ofloxacin release. Optimized formulation containing ofloxacin and 25% w/w lavender/tea tree oil showed 98% wound contraction in rats after ten days of treatment. Histological images displayed completely healed epidermis. Taken together, our prepared hydrogel films demonstrated favorable features with appreciable antibacterial, wound healing activity and could be useful for the treatment of full thickness wounds.

Bifunctional Microcapsules with n-Octadecane/Thyme Oil Core and Polyurea Shell for High-Efficiency Thermal Energy Storage and Antibiosis

A new kind of bifunctional microcapsule containing a n-octadecane (OD) and thyme oil (TO) core based on polyurea shell designed for thermal energy storage and antibiosis was prepared successfully through interfacial polymerization. The scanning electron microscopic investigations reveal that the obtained composite microcapsules present the regular spherical morphology and the transmission electron microscopic observations confirm the clear core-shell structure. Morphological and chemical structure analyses prove the successful synthesis of bifunctional microcapsules. Thermogravimetric analysis indicates that the polyurea shell can protect the composite cores effectively. Differential scanning calorimetry examination shows that the bifunctional microcapsules can maintain high thermal storage capacity and the encapsulation efficiency of OD increases with the increase in TO. The supercooling crystallization can be notably suppressed by adding 7 wt.% of n-octadecanol. A study on the release behavior of TO from the bifunctional microcapsules reveals that the Higuchi kinetic model could better fit the TO release profile. The antibacterial results demonstrate that the bifunctional microcapsules can effectively inhibit the growth of Staphylococcus aureus and the inhibition rate can reach as high as 99.9% when the mass concentration of microcapsules is over 3 wt.%.

Incorporation of quaternary ammonium chitooligosaccharides on ZnO/palygorskite nanocomposites for enhancing antibacterial activities

Quaternary ammonium chitooligosaccharides (QACOS) was incorporated onto the ZnO/palygorskite (ZnO/PAL) nanocomposite by a simple electrostatic self-assembly process to produce a new organic-inorganic nanocomposite (QACOS/ZnO/PAL) with excellent antibacterial activity. After loading QACOS, the Zeta potential of ZnO/PAL was changed from -26.7 to +30.3 mV, which facilitates to improve the targeting behavior of ZnO/PAL towards bacteria and its contact with bacteria, resulting in a significant improvement of antibacterial capability. The MIC values of QACOS/ZnO/PAL for inhibiting bacteria (0.5 mg/mL for E. coli and 1 mg/L for S. aureus) were superior to ZnO/PAL and QACOS, demonstrated an expected synergistic antibacterial effect between QACOS and ZnO/PAL. The improved contact and interface interaction between QACOS/ZnO/PAL and bacteria makes it easier to destroy the structural integrity of bacteria. As a whole, the incorporation of polysaccharide as regulators of surface charge opens up a new way to further enhance the antibacterial activity of inorganic antibacterial materials.

Encapsulating plant ingredients for dermocosmetic application: an updated review of delivery systems and characterization techniques

Today, there is a rising demand and ongoing search for novel plant-derived phytochemicals in the cosmetic market owing to the growing consumer expectations worldwide for green and natural health products. Various plant ingredients, including polyphenols, oils, volatile oils, vitamins and other herbal extracts, have been extensively used in herbal cosmetics. Recent advances in encapsulation technologies have greatly improved their chemical stability, biocompatibility, skin permeability and dermocosmetic efficiency when applied topically. This comprehensive review summarizes the up-to-date information on encapsulated plant ingredients tailored for dermocosmetic application with a focus on the development of novel delivery systems. An overview of the commonly used techniques for carrier characterization, performance-related properties and toxicological evaluation is also included, which might provide guidance for researchers to select or develop appropriate assay systems.

Long-term durability antibacterial microcapsules with plant-derived Chinese nutgall and their applications in wound dressing

Wound infection is a significant burden on public health. Most present antibacterial agents are typically toxic and devoid of long-term durability. We reported an antimicrobial microcapsule with Chinese nutgall (CN) encapsulated, which was a plant-derived extraction. It is biocompatible and has been used in traditional medicine systems. Sodium alginate (SA) and chitosan worked as shells. The promise of the design is to adopt biocompatible natural polymers and electrostatic attractive chitosan and SA form stable shells to keep long-term release of CN. The results exhibited microcapsules with integrated performance of biocompatibility, long-term durability (inhibition rate of 98.99% against S. aureus after 12 h and 100% after 12 h, 99.61% against E. coli after 6 h and 100% after 12 h), high antibacterial efficacy (with S. aureus inhibition zones of 7.67 mm and E. coli inhibition zones of 5.27 mm) and ease of storage (-20°C for more than 60 h). Their successful fabrication may provide new insights into application of traditional cotton gauze in a sustainable and multifunctional form.

Preparation and antimicrobial activity of thyme essential oil microcapsules prepared with gum arabic

Thyme essential oils (TEO) exhibit antimicrobial activities against a wide range of pathogenic microorganisms. Microcapsulation technology can be used to improve the stability, water solubility and antibacterial performance of TEO. In this paper, TEO was selected as the core material, and β-cyclodextrin (β-CD) was the wall material for microcapsulation; gum arabic (GA) was used as an emulsifier to prepare microcapsules by coprecipitation. The effects of gum arabic on the encapsulation rate, particle size and release rate of microcapsules were investigated. The optimal condition was found to be TEO : GA by 1 : 3 (w/w) ratio. In this condition, the embedding rate, release rate, and average size of the microcapsules were 87.61%, 53.00%, and 8.20 μm, respectively. Scanning electron microscopy (SEM) revealed that, under the action of gum arabic, the surface of microcapsules was more complete, and the size apparently decreased. Fourier-transform infrared spectroscopy (FTIR) indicated that there was no significant chemical interaction between gum arabic and β-CD. Gum arabic acted only as an emulsifier and remained in the mixed solution. For microcapsules with gum arabic as an emulsifier, the cumulative release rate of essential oils were slower at the initial time compared to microcapsules without added gum arabic. Antimicrobial activity assay exhibited TEO, which showed an inhibitory effect against Botryodiplodia theobromae Pat., and the inhibitory effect was especially strong against Colletotrichum gloeosporioides Penz. Finally, the obtained microcapsules showed the same antibacterial effect.

The gum arabic was, for the first time, used as an emulsifier for microcapsulation of essential oil.

Preparation of Tea Tree Oil/Poly(styrene-butyl methacrylate) Microspheres with Sustained Release and Anti-Bacterial Properties

Using butyl methacrylate (BMA) and styrene (St) as monomers and divinylbenzene (DVB) as a crosslinking agent, P(St-BMA) microspheres were prepared by suspension polymerization. Tea tree oil (TTO) microspheres were prepared by adsorbing TTO on P(St-BMA) microspheres. The structure and surface morphology of P(St-BMA) microspheres and TTO microspheres were characterized by Fourier transformed infrared spectroscopy (FTIR), optical microscopy, and Thermogravimetric analysis (TGA). In doing so, the structural effect of P(St-BMA) microspheres on oil absorption and sustained release properties could be investigated. The results show that the surface of the P(St-BMA) microspheres in the process of TTO microsphere formation changed from initially concave to convex. The TTO microspheres significantly improved the stability of TTO, which was found to completely decompose as the temperature of the TTO increased from about 110 °C to 150 °C. The oil absorption behavior, which was up to 3.85 g/g, could be controlled by adjusting the monomer ratio and the amount of crosslinking agent. Based on Fickian diffusion, the sustained release behavior of TTO microspheres was consistent with the Korsmeyer-Pappas kinetic model. After 13 h of natural release, the anti-bacterial effect of the TTO microspheres was found to be significantly improved compared to TTO.

Nanostructuring Biopolymers for Improved Food Quality and Safety

Food-grade biopolymers, apart from their inherent nutritional properties, can be tailored designed for improving food quality and safety, either serving as delivery vehicles for bioactive molecules, or as novel packaging components, not only improving the transport properties of biobased packaging structures, but also imparting active antibacterial and antiviral properties. In this chapter, the potential of different food-grade biopolymers (mainly proteins and carbohydrates but also some biopolyesters) to serve as encapsulating matrices for the protection of sensitive bioactives or as nanostructured packaging layers to improve transport properties and control the growth of pathogenic bacteria and viruses are described based on some developments carried out by the authors, as well as the most prominent works found in literature in this area.

Electrospray biodegradable microcapsules loaded with curcumin for drug delivery systems with high bioactivity

Biodegradable microcapsules as novel drug delivery systems were successfully fabricated by one-step processing using an electrospray technique.