Hierarchical architecture of bacterial cellulose and composite plant cell wall polysaccharide hydrogels using small angle neutron scattering

Mechanical properties and wound healing potential of bacterial cellulose-xyloglucan-dextran hydrogels

Bacterial cellulose (BC) is a promising material for use as an artificial skin in wound healing application, however, its applications are limited due to its poor malleability. Incorporating non-cellulosic polysaccharides such as dextran and xyloglucan (XG) may enhance its respective wound healing and malleability. This study presents a novel in situ biopreparation method to produce BC-based hybrid hydrogels containing dextran (BC-D) and xyloglucan-dextran (BC-XG-D) with unique mechanical and rheological properties. Structural analysis revealed that dextran of different sizes (10 k, 70 k and 2 M of Mw) form micron-sized particles by loosely binding to cellulosic fibres. The addition of xyloglucan resulted acts as a lubricant in mechanical testing. The BC-XG-D hybrid hydrogels showed a reduced Young's modulus of 4 MPa and a higher maximum tensile strain of 53 % compared to native BC. Moreover, they displayed less plastic but more viscous behaviour under large shear strain deformation. The wound healing animal model experiments demonstrated that the BC-XG-D hybrid hydrogels promoted wound healing process and skin maturation. Overall, these findings contribute to the development of functional BC-based medical materials with desired mechanical and rheological properties that have the potential to accelerate wound healing.

Composite Hydrogels Based on Bacterial Cellulose and Poly-1-vinyl-1,2,4-triazole/Phosphoric Acid: Supramolecular Structure as Studied by Small Angle Scattering

New composite hydrogels (CH) based on bacterial cellulose (BC) and poly-1-vinyl-1,2,4-triazole (PVT) doped with orthophosphoric acid (oPA), presenting interpenetrating polymeric networks (IPN), have been synthesized. The mesoscopic study of the supramolecular structure (SMS) of both native cellulose, produced by the strain Komagataeibacter rhaeticus, and the CH based on BC and containing PVT/oPA complex were carried out in a wide range of momentum transfer using ultra- and classical small-angle neutron scattering techniques. The two SMS hierarchical levels were revealed from 1.6 nm to 2.5 μm for the objects under investigation. In addition, it was shown that the native BC had a correlation peak on the small-angle scattering curves at 0.00124 Å-1, with the correlation length ξ being equal to ca. 510 nm. This motive was also retained in the IPN. The data obtained allowed the estimation of the fractal dimensions and ranges of self-similarity and gave new information about the BC mesostructure and its CH. Furthermore, we revealed them to be in coincidence with Brown's BC model, which was earlier supported by Fink's results.

Investigating the role of AA9 LPMOs in enzymatic hydrolysis of differentially steam-pretreated spruce

BACKGROUND

To realize the full potential of softwood-based forest biorefineries, the bottlenecks of enzymatic saccharification of softwood need to be better understood. Here, we investigated the potential of lytic polysaccharide monooxygenases (LPMO9s) in softwood saccharification. Norway spruce was steam-pretreated at three different severities, leading to varying hemicellulose retention, lignin condensation, and cellulose ultrastructure. Hydrolyzability of the three substrates was assessed after pretreatment and after an additional knife-milling step, comparing the efficiency of cellulolytic Celluclast + Novozym 188 and LPMO-containing Cellic CTec2 cocktails. The role of Thermoascus aurantiacus TaLPMO9 in saccharification was assessed through time-course analysis of sugar release and accumulation of oxidized sugars, as well as wide-angle X-ray scattering analysis of cellulose ultrastructural changes.

RESULTS

Glucose yield was 6% (w/w) with the mildest pretreatment (steam pretreatment at 210 °C without catalyst) and 66% (w/w) with the harshest (steam pretreatment at 210 °C with 3%(w/w) SO₂) when using Celluclast + Novozym 188. Surprisingly, the yield was lower with all substrates when Cellic CTec2 was used. Therefore, the conditions for optimal LPMO activity were tested and it was found that enough O₂ was present over the headspace and that the reducing power of the lignin of all three substrates was sufficient for the LPMOs in Cellic CTec2 to be active. Supplementation of Celluclast + Novozym 188 with TaLPMO9 increased the conversion of glucan by 1.6-fold and xylan by 1.5-fold, which was evident primarily in the later stages of saccharification (24-72 h). Improved glucan conversion could be explained by drastically reduced cellulose crystallinity of spruce substrates upon TaLPMO9 supplementation.

CONCLUSION

Our study demonstrated that LPMO addition to hydrolytic enzymes improves the release of glucose and xylose from steam-pretreated softwood substrates. Furthermore, softwood lignin provides enough reducing power for LPMOs, irrespective of pretreatment severity. These results provided new insights into the potential role of LPMOs in saccharification of industrially relevant softwood substrates.

Spin diffusion transfer difference (SDTD) NMR: An advanced method for the characterisation of water structuration within particle networks

HYPOTHESIS

The classical STD NMR protocol to monitor solvent interactions in gels is strongly dependent on gelator and solvent concentrations and does not report on the degree of structuration of the solvent at the particle/solvent interface. We hypothesised that, for suspensions of large gelator particles, solvent structuration could be characterised by STD NMR when taking into account the particle-to-solvent ¹H-¹H spin diffusion transfer using the 1D diffusion equation.

EXPERIMENTS

We have carried out a systematic study on effect of gelator and solvent concentrations, and gelator surface charge, affecting the behaviour of the classical STD NMR build-up curves. To do so, we have characterised solvent interactions in dispersions of starch and cellulose-like particles prepared in deuterated water and alcohol/D₂O mixtures.

FINDINGS

The Spin Diffusion Transfer Difference (SDTD) NMR protocol is independent of the gelator and solvent concentrations, hence allowing the estimation of the degree of solvent structuration within different particle networks. In addition, the simulation of SDTD build-up curves using the general one-dimensional diffusion equation allows the determination of minimum distances (r) and spin diffusion rates (D) at the particle/solvent interface. This novel NMR protocol can be readily extended to characterise the solvent(s) organisation in any type of colloidal systems constituted by large particles.

The basics of small-angle neutron scattering (SANS for new users of structural biology)

Small-angle neutron scattering (SANS) provides a means to probe the time-preserved structural state(s) of bio-macromolecules in solution. As such, SANS affords the opportunity to assess the redistribution of mass, i.e., changes in conformation, which occur when macromolecules interact to form higher-order assemblies and to evaluate the structure and disposition of components within such systems. As a technique, SANS offers scope for ‘out of the box thinking’, from simply investigating the structures of macromolecules and their complexes through to where structural biology interfaces with soft-matter and nanotechnology. All of this simply rests on the way neutrons interact and scatter from atoms (largely hydrogens) and how this interaction differs from the scattering of neutrons from the nuclei of other ‘biological isotopes’. The following chapter describes the basics of neutron scattering for new users of structural biology in context of the neutron/hydrogen interaction and how this can be exploited to interrogate the structures of macromolecules, their complexes and nano-conjugates in solution.

Crystal and Supramolecular Structure of Bacterial Cellulose Hydrolyzed by Cellobiohydrolase from Scytalidium Candidum 3C: A Basis for Development of Biodegradable Wound Dressings

The crystal and supramolecular structure of the bacterial cellulose (BC) has been studied at different stages of cellobiohydrolase hydrolysis using various physical and microscopic methods. Enzymatic hydrolysis significantly affected the crystal and supramolecular structure of native BC, in which the 3D polymer network consisted of nanoribbons with a thickness T ≈ 8 nm and a width W ≈ 50 nm, and with a developed specific surface S_BET ≈ 260 m²·g⁻¹. Biodegradation for 24 h led to a ten percent decrease in the mean crystal size D_hkl of BC, to two-fold increase in the sizes of nanoribbons, and in the specific surface area S_BET up to ≈ 100 m²·g⁻¹. Atomic force and scanning electron microscopy images showed BC microstructure “loosening“after enzymatic treatment, as well as the formation and accumulation of submicron particles in the cells of the 3D polymer network. Experiments in vitro and in vivo did not reveal cytotoxic effect by the enzyme addition to BC dressings and showed a generally positive influence on the treatment of extensive III-degree burns, significantly accelerating wound healing in rats. Thus, in our opinion, the results obtained can serve as a basis for further development of effective biodegradable dressings for wound healing.

Enzymatic Hydrolysis of Bacterial Cellulose for the Production of Nanocrystals for the Food Packaging Industry

Bacterial cellulose nanocrystals (BCNCs) obtained by enzymatic hydrolysis have been loaded in pullulan biopolymer for use as nanoparticles in the generation of high-oxygen barrier coatings intended for food packaging applications. Bacterial cellulose (BC) produced by Komagataeibacter sucrofermentans was hydrolyzed by two different enzymatic treatments, i.e., using endo-1,4-β-glucanases (EGs) from Thermobifida halotolerans and cellulase from Trichoderma reesei. The hydrolytic activity was compared by means of turbidity experiments over a period of 145 h, whereas BCNCs in their final state were compared, in terms of size and morphology, by atomic force microscopy (AFM) and dynamic light scattering (DLS). Though both treatments led to particles of similar size, a greater amount of nano-sized particles (≈250 nm) were observed in the system that also included cellulase enzymes. Unexpectedly, transmission electron microscopy (TEM) revealed that cellulose nanoparticles were round-shaped and made of 4–5 short (150–180 nm) piled whiskers. Pullulan/BCNCs nanocomposite coatings allowed an increase in the overall oxygen barrier performance, of more than two and one orders of magnitude (≈0.7 mL·m⁻²·24 h⁻¹), of pure polyethylene terephthalate (PET) (≈120 mL·m⁻²·24 h⁻¹) as well as pullulan/coated PET (≈6 mL·m⁻²·24 h⁻¹), with no significant difference between treatments (hydrolysis mediated by EGs or with the addition of cellulase). BCNCs obtained by enzymatic hydrolysis have the potential to generate high oxygen barrier coatings for the food packaging industry.

High Molecular Weight Mixed-Linkage Glucan as a Mechanical and Hydration Modulator of Bacterial Cellulose: Characterization by Advanced NMR Spectroscopy

Bacterial cellulose (BC) consists of a complex three-dimensional organization of ultrafine fibers which provide unique material properties such as softness, biocompatibility, and water-retention ability, of key importance for biomedical applications. However, there is a poor understanding of the molecular features modulating the macroscopic properties of BC gels. We have examined chemically pure BC hydrogels and composites with arabinoxylan (BC-AX), xyloglucan (BC-XG), and high molecular weight mixed-linkage glucan (BC-MLG). Atomic force microscopy showed that MLG greatly reduced the mechanical stiffness of BC gels, while XG and AX did not exert a significant effect. A combination of advanced solid-state NMR methods allowed us to characterize the structure of BC ribbons at ultra-high resolution and to monitor local mobility and water interactions. This has enabled us to unravel the effect of AX, XG, and MLG on the short-range order, mobility, and hydration of BC fibers. Results show that BC-XG hydrogels present BC fibrils of increased surface area, which allows BC-XG gels to hold higher amounts of bound water. We report for the first time that the presence of high molecular weight MLG reduces the density of clusters of BC fibrils and dramatically increases water interactions with BC. Our data supports two key molecular features determining the reduced stiffness of BC-MLG hydrogels, that is, (i) the adsorption of MLG on the surface of BC fibrils precluding the formation of a dense network and (ii) the preorganization of bound water by MLG. Hence, we have produced and fully characterized BC-MLG hydrogels with novel properties which could be potentially employed as renewable materials for applications requiring high water retention capacity (e.g. personal hygiene products).

Molecular insight into the wetting behavior and amphiphilic character of cellulose nanocrystals

The study of nanocellulose is a field of growing interest due to its many applications and its use in the development of biocompatible and eco-friendly materials. In spite of the vast number of studies in the field, many questions about the role of the molecular structure in the properties of cellulose are still subject of debate. One of these fundamental questions is the possible amphiphilic nature of cellulose and the relative role of hydrogen bonding and hydrophobic effect on the interactions of cellulose. In this work we present an extensive molecular dynamics simulation study of this question by analyzing the wetting of cellulose with water and organic solvent, its interaction with hydrophilic and hydrophobic ions and its interaction with a protein (human epidermal growth factor, hEGF). We consider two characteristic cellulose crystal planes of Iβ cellulose with very different roughness, different hydrogen bonding capability and different exposure of cellulose hydrophobic groups (the (010) plane which has exposed -OH groups and the (100) plane with buried -OH groups). Our results show that both surfaces are simultaneously hydrophilic and lipophilic, with both surfaces having very similar contact angles. In spite of the global similarity of wetting of both surfaces, the molecular details of wetting are very different and substantial local wetting heterogeneities (which strongly depend on the surface) appear for both solvents. We also observe a weak interaction of both surfaces with hydrophobic and hydrophilic solutes. These weak interactions are attributed to the simultaneous lipophilic and hydrophilic character of both (100) and (010) cellulose surfaces. Interestingly, we found a substantial interaction of both cellulose planes with polar and apolar residues of the hEGF protein.

Hemicellulose-Cellulose Composites Reveal Differences in Cellulose Organization after Dilute Acid Pretreatment

Model hemicellulose-cellulose composites that mimic plant cell wall polymer interactions were prepared by synthesizing deuterated bacterial cellulose in the presence of glucomannan or xyloglucan. Dilute acid pretreatment (DAP) of these materials was studied using small-angle neutron scattering, X-ray diffraction, and sum frequency generation spectroscopy. The macrofibril dimensions of the pretreated cellulose alone were smaller but with similar entanglement of macrofibrillar network as native cellulose. In addition, the crystallite size dimension along the (010) plane increased. Glucomannan-cellulose underwent similar changes to cellulose, except that the macrofibrillar network was more entangled after DAP. Conversely, in xyloglucan-cellulose the macrofibril dimensions and macrofibrillar network were relatively unchanged after pretreatment, but the cellulose I_β content was increased. Our results point to a tight interaction of xyloglucan with microfibrils while glucomannan only interacts with macrofibril surfaces. This study provides insight into roles of different hemicellulose-cellulose interactions and may help in improving pretreatment processes or engineering plants with decreased recalcitrance.

Neutron scattering in the biological sciences: progress and prospects

The scattering of neutrons can be used to provide information on the structure and dynamics of biological systems on multiple length and time scales. Pursuant to a National Science Foundation-funded workshop in February 2018, recent developments in this field are reviewed here, as well as future prospects that can be expected given recent advances in sources, instrumentation and computational power and methods. Crystallography, solution scattering, dynamics, membranes, labeling and imaging are examined. For the extraction of maximum information, the incorporation of judicious specific deuterium labeling, the integration of several types of experiment, and interpretation using high-performance computer simulation models are often found to be particularly powerful.

Probing adhesion between nanoscale cellulose fibres using AFM lateral force spectroscopy: The effect of hemicelluloses on hydrogen bonding

Inter-fibre adhesion is a key contributing factor to the mechanical response and functionality of cellulose-based biomaterials. 'Dip-and-Drag' lateral force atomic force microscopy technique is used here to evaluate the influence of arabinoxylan and xyloglucan on interactions between nanoscale cellulose fibres within a hydrated network of bacterial cellulose. A cohesive zone model of the detachment event between two nano-fibres is used to interpret the experimental data and evaluate inter-fibre adhesion energy. The presence of xyloglucan or arabinoxylan is found to increase the adhesive energy by a factor of 4.3 and 1.3, respectively, which is consistent with these two hemicellulose polysaccharides having different specificity of hydrogen bonding with cellulose. Importantly, xyloglucan's ability to strengthen adhesion between cellulose nano-fibres supports emergent models of the primary plant cell walls (Park & Cosgrove, 2012b), which suggest that xyloglucan chains confined within cellulose-cellulose junctions play a key role in cell wall's mechanical response.

QUOKKA, the pinhole small-angle neutron scattering instrument at the OPAL Research Reactor, Australia: design, performance, operation and scientific highlights

QUOKKA is a 40 m pinhole small-angle neutron scattering instrument in routine user operation at the OPAL research reactor at the Australian Nuclear Science and Technology Organisation. Operating with a neutron velocity selector enabling variable wavelength, QUOKKA has an adjustable collimation system providing source–sample distances of up to 20 m. Following the large-area sample position, a two-dimensional 1 m2position-sensitive detector measures neutrons scattered from the sample over a secondary flight path of up to 20 m. Also offering incident beam polarization and analysis capability as well as lens focusing optics, QUOKKA has been designed as a general purpose SANS instrument to conduct research across a broad range of scientific disciplines, from structural biology to magnetism. As it has recently generated its first 100 publications through serving the needs of the domestic and international user communities, it is timely to detail a description of its as-built design, performance and operation as well as its scientific highlights. Scientific examples presented here reflect the Australian context, as do the industrial applications, many combined with innovative and unique sample environments.

Real-time imaging reveals that lytic polysaccharide monooxygenase promotes cellulase activity by increasing cellulose accessibility

BACKGROUND

The high cost of enzymes is one of the key technical barriers that must be overcome to realize the economical production of biofuels and biomaterials from biomass. Supplementation of enzyme cocktails with lytic polysaccharide monooxygenase (LPMO) can increase the efficiency of these cellulase mixtures for biomass conversion. The previous studies have revealed that LPMOs cleave polysaccharide chains by oxidization of the C1 and/or C4 carbons of the monomeric units. However, how LPMOs enhance enzymatic degradation of lignocellulose is still poorly understood.

RESULTS

In this study, we combined enzymatic assays and real-time imaging using atomic force microscopy (AFM) to study the molecular interactions of an LPMO [TrAA9A, formerly known as TrCel61A) from Trichoderma reesei] and a cellobiohydrolase I (TlCel7A from T. longibrachiatum) with bacterial microcrystalline cellulose (BMCC) as a substrate. Cellulose conversion by TlCel7A alone was enhanced from 46 to 54% by the addition of TrAA9A. Conversion by a mixture of TlCel7A, endoglucanase, and β-glucosidase was increased from 79 to 87% using pretreated BMCC with TrAA9A for 72 h. AFM imaging demonstrated that individual TrAA9A molecules exhibited intermittent random movement along, across, and penetrating into the ribbon-like microfibril structure of BMCC, which was concomitant with the release of a small amount of oxidized sugars and the splitting of large cellulose ribbons into fibrils with smaller diameters. The dividing effect of the cellulose microfibril occurred more rapidly when TrAA9A and TlCel7A were added together compared to TrAA9A alone; TlCel7A alone caused no separation.

CONCLUSIONS

TrAA9A increases the accessible surface area of BMCC by separating large cellulose ribbons, and thereby enhances cellulose hydrolysis yield. By providing the first direct observation of LPMO action on a cellulosic substrate, this study sheds new light on the mechanisms by which LPMO enhances biomass conversion.

Cell wall biomechanics: a tractable challenge in manipulating plant cell walls 'fit for purpose'!

The complexity and recalcitrance of plant cell walls has contributed to the success of plants colonising land. Conversely, these attributes have also impeded progress in understanding the roles of walls in controlling and directing developmental processes during plant growth and also in unlocking their potential for biotechnological innovation. Recent technological advances have enabled the probing of how primary wall structures and molecular interactions of polysaccharides define their biomechanical (and hence functional) properties. The outputs have led to a new paradigm that places greater emphasis on understanding how the wall, as a biomechanical construct and cell surface sensor, modulates both plant growth and material properties. Armed with this knowledge, we are gaining the capacity to design walls 'fit for (biotechnological) purpose'!

Fibrillar assembly of bacterial cellulose in the presence of wood-based hemicelluloses

Composite materials mimicking the plant cell wall structure were made by culturing cellulose-producing bacteria together with secondary-wall hemicelluloses from wood. The effects of spruce galactoglucomannan (GGM) and beech xylan on the nanoscale morphology of bacterial cellulose were studied in the original, hydrated state with small-angle X-ray scattering (SAXS). The SAXS intensities were fitted with a model covering multiple levels of the hierarchical structure. Additional information on the structure of dried samples was obtained using scanning and transmission electron microscopy and infra-red spectroscopy. Both hemicelluloses induced a partial conversion of the cellulose crystal structure from I_α to I_β and a reduction of the cross-sectional dimensions of the cellulose microfibrils, thereby affecting also their packing into bundles. The differences were more pronounced in samples with xylan instead of GGM, and they became more significant with higher hemicellulose concentrations.

Water in cellulose: evidence and identification of immobile and mobile adsorbed phases by 2H MAS NMR

The organization of water molecules adsorbed onto cellulose and the supramolecular hydrated structure of microfibril aggregates represents, still today, one of the open and complex questions in the physical chemistry of natural polymers.