In Situ Formation of Ripplocations in Hybrid Organic-Inorganic MXenes

Inorganic-organic hybrid MXenes (h-MXenes) are a family of 2D transition metal carbides and nitrides functionalized with alkylimido and alkylamido surface groups. Using cryogenic and room temperature scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS), it is shown that ripplocations, a form of a fundamental defect in 2D and layered structures, are abundant in this family of materials. Furthermore, detailed studies of electron probe sample interactions, focusing on structural deformations caused by the electron beam are presented. The findings indicate that at cryogenic temperatures (≈100 K) and below a specific dose threshold, the structure of h-MXenes remains largely intact. However, exceeding this threshold leads to electron beam-induced deformation through ripplocations. Interestingly, the deformation behavior, required dose, and resultant structure are highly dependent on temperature. At 100 K, it is demonstrated that the electron beam can induce ripplocations in situ with a high degree of precision.

Recent advances in MXene catalyst towards enhanced hydrogen storage of Mg/MgH2: a review

Hydrogen is regarded as an ideal substitute for fossil fuels on account of its advantages of high energy density, zero carbon emissions, and abundant reserves. Solid-state hydrogen storage is one of the most promising hydrogen storage methods in terms of high-volume storage density and safety. MgH2is a promising solid hydrogen storage material because of its high hydrogen storage capacity and favorable cycle reversibility. Nevertheless, its inferior thermodynamic and kinetic properties restrict its extensive application. Catalyst modification is considered to be an efficient way to enhance the thermodynamic and kinetic properties of hydrogenation and dehydrogenation for MgH2. This review summarizes the latest research progress on MXene-based composites, such as MAX, single metal MXene, bimetallic MXene, MXene/elemental metal, and MXene/transition metal compounds for promoting the hydrogen storage performances of MgH2. At the same time, the catalyst of MXene-based composites to optimize the hydrogenation/dehydrogenation kinetics, long cycle performance and catalytic mechanism of Mg/MgH2are discussed in detail.

XPS Binding Energy Shifts in 2D Ti3C2Tz MXene go largely Beyond Intuitive Explanations: Rationalization from DFT Simulations and Experiments

MXenes are prototypes of surface tunable 2D materials with vast potential for properties tuning. Accurately characterizing their surface functionalization and its role in electronic structure is crucial, X-ray photoelectron spectroscopy (XPS) being among the go-to methods to do so. Despite extensive use, XPS analysis remains however intricate. Focusing on the benchmark MXene Ti3C2Tz, Density Functional Theory (DFT) calculations of core-level binding energy shifts (BE.s.) are combined with experiments in order to provide a quantitative interpretation of XPS spectra. This approach demonstrates that BE.s. are driven by the complex interplay between chemical, structural, and subtle electronic structure effects preventing analysis from intuitive arguments or comparison with reference materials. In particular, it is shown that O terminations induce the largest BE.s. at Ti 2p levels despite lower electronegativity than F. Additionally, F 1s levels show weak sensitivity to the F local environment, explaining the single contribution in the spectrum, whereas O 1s states are significantly affected by the local surface chemistry. Finally, clear indicators of surface group vacancies are given at Ti 2p and O 1s levels. These results demonstrate the combination of calculations with experiments as a method of the highest value for MXenes XPS spectra analysis, providing guidelines for otherwise complex interpretations.

Recent progression in MXene-based catalysts for emerging photocatalytic applications of CO2 reduction and H2 production: A review

The development of advanced materials for efficient photocatalytic H2 production and CO2 reduction is highly recommended for addressing environmental issues and producing clean energy sources. Specifically, MXenes have emerged as two-dimensional (2D) materials extensively used as high-performance cocatalysts in photocatalyst systems owing to their outstanding features of structure and properties such as high conductivity, large specific surface area, and abundant active sites. Nevertheless, there is a lack of deep and systematic studies concerning the application of these emerging materials for CO2 reduction reaction (CRR) and H2 production (HER). This review first outlines the essential features of MXenes, encompassing the synthesis methods, composition, surface terminations, and electronic properties, which make them highly active as cocatalysts. It then examines the recent progress in MXene-based photocatalysts, emphasizing the synergy achieved by coupling MXenes as co-catalysts with semiconductors, utilizing MXenes as a support for the consistent growth of photocatalysts, leading to finely dispersed nanoparticles, and exploiting MXene as exceptional precursors for creating MXene/metal oxide photocomposite. The roles of engineering surface terminations of MXene cocatalysts, MXene quantum dots (QDs), and distinctive morphologies in MXenes-based photocatalyst systems to enhance photocatalytic activity for both HER and CRR have been explored both experimentally and theoretically using DFT calculations. Challenges and prospects for MXene-based photocatalysts are also addressed. Finally, suggestions for further research and development of effective and economical MXenes/semiconductors strategies are proposed. This comprehensive review article serves as a valuable reference for researchers for applying MXenes in photocatalysis.

Interfacial Engineering of Ti3C2Tx MXene Electrode Using g-C3N4 Nanosheets for High-Performance Supercapacitor in Neutral Electrolyte

The superior performance of the Ti3C2Tx (MXene)-based supercapacitor in acidic electrolytes has recently gained much interest in the energy storage community. Nevertheless, its performance in most neutral electrolytes is unfavorably low, plausibly due to limited ion diffusion between the MXene layers. Herein, protonated g-C3N4 (pg-C3N4) is incorporated into the Ti3C2Tx electrode by using a facile self-assembling process and annealing, which results in increased interlayer d-spacing and electrical conductivity of the composite electrode. As a result, the annealed Ti3C2Tx/pg-C3N4 film revealed an enhanced ion-accessibility and gravimetric capacitance of 140 F g-1 in 1 M aqueous MgSO4 electrolyte. The cyclic stability test also indicates excellent capacitance retention, with negligible loss of capacitance over 10000 cycles.

Mechanical Properties of Ti3AlC2/Cu Composites Reinforced by MAX Phase Chemical Copper Plating

Among the various reinforcement phases available in Cu-based composites, the unique layered structure and easy diffusion of A-layer atoms make MAX phases more suitable for reinforcing a copper matrix than others. In this study, Cu-coated Ti3AlC2 particles (Cu@Ti3AlC2) were prepared through electroless plating, and Cu@Ti3AlC2/Cu composites were fabricated via vacuum hot-press sintering. The phase composition and microstructure of both Cu@Ti3AlC2 powder and composites were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results demonstrate the creation of successful electroless copper plating to obtain a Cu coating on Ti3AlC2 particles. At 850 °C, a small amount of Ti3AlC2 particles decompose to form TiCx, while Al atoms from the A layer of MAX phase diffuse into the Cu matrix to form a solid solution with Cu(Al). The test results reveal that the density of the Cu@Ti3AlC2/Cu composite reaches 98.5%, with a maximum compressive strength of 705 MPa, which is 8.29% higher than that of the Ti3AlC2/Cu composite. Additionally, the compressive strain reaches 37.6%, representing an increase of 12.24% compared to that exhibited by the Ti3AlC2/Cu composite.

Space-Confined Synthesis of Monolayer Graphdiyne in MXene Interlayer

Graphdiyne (GDY) is an artificial carbon allotrope that is conceptually similar to graphene but composed of sp- and sp2 -hybridized carbon atoms. Monolayer GDY (ML-GDY) is predicted to be an ideal 2D semiconductor material with a wide range of applications. However, its synthesis has posed a significant challenge, leading to difficulties in experimentally validating theoretical properties. Here, it is reported that in situ acetylenic homocoupling of hexaethynylbenzene within the sub-nanometer interlayer space of MXene can effectively prevent out-of-plane growth or vertical stacking of the material, resulting in ML-GDY with in-plane periodicity. The subsequent exfoliation process successfully yields free-standing GDY monolayers with micrometer-scale lateral dimensions. The fabrication of field-effect transistor on free-standing ML-GDY makes the first measurement of its electronic properties possible. The measured electrical conductivity (5.1 × 103 S m-1 ) and carrier mobility (231.4 cm2 V-1 s-1 ) at room temperature are remarkably higher than those of the previously reported multilayer GDY materials. The space-confined synthesis using layered crystals as templates provides a new strategy for preparing 2D materials with precisely controlled layer numbers and long-range structural order.

Future prospects of MXenes: synthesis, functionalization, properties, and application in field effect transistors

MXenes are a family of two-dimensional (2D) materials that have drawn a lot of interest recently because of their distinctive characteristics and possible uses in a variety of industries. This review emphasizes the bright future prospects of MXene materials in the realm of FETs. Their remarkable properties, coupled with their tunability and compatibility, position MXenes as promising candidates for the development of high-performance electronic devices. As research in this field continues to evolve, the potential of MXenes to drive innovation in electronics becomes increasingly evident, fostering excitement for their role in shaping the future of electronic technology. This paper presents a comprehensive overview of MXene materials, focusing on their synthesis methods, functionalization strategies, intrinsic properties, and their promising application in Field Effect Transistors (FETs).

The Evolution of MXenes Conductivity and Optical Properties Upon Heating in Air

MXenes, a family of 2D transition-metal carbides and nitrides, have excellent electrical conductivity and unique optical properties. However, MXenes oxidize in ambient conditions, which is accelerated upon heating. Intercalation of water also causes hydrolysis accelerating oxidation. Developing new tools to readily characterize MXenes' thermal stability can enable deeper insights into their structure-property relationships. Here, in situ spectroscopic ellipsometry (SE) is employed to characterize the optical properties of three types of MXenes (Ti3 C2 Tx , Mo2 TiC2 Tx , and Ti2 CTx ) with varied composition and atomistic structures to investigate their thermal degradation upon heating under ambient environment. It is demonstrated that changes in MXene extinction and optical conductivity in the visible and near-IR regions correlate well with the amount of intercalated water and hydroxyl termination groups and the degree of oxidation, measured using thermogravimetric analysis. Among the three MXenes, Ti3 C2 Tx and Ti2 CTx , respectively, have the highest and lowest thermal stability, indicating the role of transition-metal type, synthesis route, and the number of atomic layers in MXene flakes. These findings demonstrate the utility of SE as a powerful in situ technique for rapid structure-property relationship studies paving the way for the further design, fabrication, and property optimization of novel MXene materials.

Effect of surface functional groups on MXene conductivity

We report the in-plane electron transport in the MXenes (i.e., within the MXene layers) as a function of composition using the density-functional tight-binding method, in conjunction with the non-equilibrium Green's functions technique. Our study reveals that all MXene compositions have a linear relationship between current and voltage at lower potentials, indicating their metallic character. However, the magnitude of the current at a given voltage (conductivity) has different trends among different compositions. For example, MXenes without any surface terminations (Ti3C2) exhibit higher conductivity compared to MXenes with surface functionalization. Among the MXenes with -O and -OH termination, those with -O surface termination have lower conductivity than the ones with -OH surface terminations. Interestingly, conductivity changes with the ratio of -O and -OH on the MXene surface. Our calculated I-V curves and their conductivities correlate well with transmission functions and the electronic density of states around the Fermi level. The surface composition-dependent conductivity of the MXenes provides a path to tune the in-plane conductivity for enhanced pseudocapacitive performance.

Assessing the Surface Chemistry of 2D Transition Metal Carbides (MXenes): A Combined Experimental/Theoretical 13C Solid State NMR Approach

The surface functionalization of 2D transition metal carbides or nitrides, so-called MXenes, is one of the fundamental levers allowing to deeply modify their physicochemical properties. Beyond new approaches to control this pivotal parameter, the ability to unambiguously assess their surface chemistry is thus key to expand the application fields of this large class of 2D materials. Using a combination of experiments and state of the art density functional theory calculations, we show that the NMR signal of the carbon─the element common to all MXene carbides and corresponding MAX phase precursors─is extremely sensitive to the MXene functionalization, although carbon atoms are not directly bonded to the surface groups. The simulations include the orbital part to the NMR shielding and the contribution from the Knight shift, which is crucial to achieve good correlation with the experimental data, as demonstrated on a set of reference MXene precursors. Starting with the Ti3C2Tx MXene benchmark system, we confirm the high sensitivity of the 13C NMR shift to the exfoliation process. Developing a theoretical protocol to straightforwardly simulate different surface chemistries, we show that the 13C NMR shift variations can be quantitatively related to different surface compositions and number of surface chemistry variants induced by the different etching agents. In addition, we propose that the etching agent affects not only the nature of the surface groups but also their spatial distribution. The direct correlation between surface chemistry and 13C NMR shift is further confirmed on the V2CTx, Mo2CTx, and Nb2CTx MXenes.

Recent Advancement in Rational Design Modulation of MXene: A Voyage from Environmental Remediation to Energy Conversion and Storage

Use of MXenes (Ti₃ C₂ T_x ), which belongs to the family of two-dimensional transition metal nitrides and carbides by encompassing unique combination of metallic conductivity and hydrophilicity, is receiving tremendous attention, since its discovery as energy material in 2011. Owing to its precursor selective chemical etching, and unique intrinsic characteristics, the MXene surface properties are further classified into highly chemically active compound, which further produced different surface functional groups i. e., oxygen, fluorine or hydroxyl groups. However, the role of surface functional groups doesn't not only have a significant impact onto its electrochemical and hydrophilic characteristics (i. e., ion adsorption/diffusion), but also imparting a noteworthy effect onto its conductivity, work function, electronic structure and properties. Henceforth, such kind of inherent chemical nature, robust electrochemistry and high hydrophilicity ultimately increasing the MXene application as a most propitious material for overall environment-remediation, electrocatalytic sensors, energy conversion and storage application. Moreover, it is well documented that the role of MXenes in all kinds of research fields is still on a progress stage for their further improvement, which is not sufficiently summarized in literature till now. The present review article is intended to critically discuss the different chemical aptitudes and the diversity of MXenes and its derivates (i. e., hybrid composites) in all aforesaid application with special emphasis onto the improvement of its surface characteristics for the multidimensional application. However, this review article is anticipated to endorse MXenes and its derivates hybrid configuration, which is discussed in detail for emerging environmental decontamination, electrochemical use, and pollutant detection via electrocatalytic sensors, photocatalysis, along with membrane distillation and the adsorption application. Finally, it is expected, that this review article will open up new window for the effective use of MXene in a broad range of environmental remediation, energy conversion and storage application as a novel, robust, multidimensional and more proficient materials.

First-Principles Study on the Structural, Electronic, and Lithium Storage Properties of Ti3C2T2 (T = O, F, H, OH) MXene

The structures of bare Ti₃C₂ and functionalized Ti₃C₂T₂ (T = O, F, H, OH) MXenes were constructed, and the effect of surface functional groups T₂ (T = O, F, H, OH) on the structural, electronic, and lithium storage properties were investigated by first-principles calculations. The results show that the proximity of surface functional groups will induce some lattice distortion of Ti₃C₂T₂ MXene. The degree of lattice distortion depends mainly on the adsorption position of functional groups and the types of surface functional groups. From the point of view of forming energy, the surface functional groups tend to be located at the CCP site. From the energy band and DOS results, the presence of surface functional groups has a significant effect on the valence band, while it has a slight impact on the conduction band. In terms of lithium storage, lithium atom adsorption starts from the HCP position for bare Ti₃C₂, while functionalized Ti₃C₂T₂ starts from the CCP position. The double-layer lithium storage capacity of bare Ti₃C₂ and Ti₃C₂O₂ were 639.78 mAh/g and 537.22 mAh/g, respectively. And the single-layer lithium storage capacity of Ti₃C₂F₂ was 130.77 mAh/g.

Termination-Property Coupling via Reversible Oxygen Functionalization of MXenes

MXenes are a growing family of 2D transition-metal carbides and nitrides, which display excellent performance in myriad of applications. Theoretical calculations suggest that manipulation of the MXene surface termination (such as =O or −F) could strongly alter their functional properties; however, experimental control of the MXene surface termination is still in the developmental stage. Here, we demonstrate that annealing MXenes in an Ar + O₂ low-power plasma results in increased =O functionalization with minimal formation of secondary phases. We apply this method to two MXenes, Ti₂CT_x and Mo₂TiC₂T_x (T_x represents the mixed surface termination), and show that in both cases, the increased =O content increases the electrical resistance and decreases the surface transition-metal’s electron count. For Mo₂TiC₂O_x, we show that the O content can be reversibly altered through successive vacuum and plasma annealing. This work provides an effective way to tune MXene surface functionalization, which may unlock exciting surface-dependent properties.

Surface Functionalized MXenes for Wastewater Treatment-A Comprehensive Review

Over 80% of wastewater worldwide is released into the environment without proper treatment. Whilst environmental pollution continues to intensify due to the increase in the number of polluting industries, conventional techniques employed to clean the environment are poorly effective and are expensive. MXenes are a new class of 2D materials that have received a lot of attention for an extensive range of applications due to their tuneable interlayer spacing and tailorable surface chemistry. Several MXene-based nanomaterials with remarkable properties have been proposed, synthesized, and used in environmental remediation applications. In this work, a comprehensive review of the state-of-the-art research progress on the promising potential of surface functionalized MXenes as photocatalysts, adsorbents, and membranes for wastewater treatment is presented. The sources, composition, and effects of wastewater on human health and the environment are displayed. Furthermore, the synthesis, surface functionalization, and characterization techniques of merit used in the study of MXenes are discussed, detailing the effects of a range of factors (e.g., PH, temperature, precursor, etc.) on the synthesis, surface functionalization, and performance of the resulting MXenes. Finally, the limits of MXenes and MXene-based materials as well as their potential future research directions, especially for wastewater treatment applications are highlighted.

Coupling of N-Doped Mesoporous Carbon and N-Ti3 C2 in 2D Sandwiched Heterostructure for Enhanced Oxygen Electroreduction

2D heterostructures provide a competitive platform to tailor electrical property through control of layer structure and constituents. However, despite the diverse integration of 2D materials and their application flexibility, tailoring synergistic interlayer interactions between 2D materials that form electronically coupled heterostructures remains a grand challenge. Here, the rational design and optimized synthesis of electronically coupled N-doped mesoporous defective carbon and nitrogen modified titanium carbide (Ti₃ C₂ ) in a 2D sandwiched heterostructure, is reported. First, a F127-polydopamine single-micelle-directed interfacial assembly strategy guarantees the construction of two surrounding mesoporous N-doped carbon monolayers assembled on both sides of Ti₃ C₂ nanosheets. Second, the followed ammonia post-treatment successfully introduces N elements into Ti₃ C₂ structure and more defective sites in N-doped mesoporous carbon. Finally, the oxygen reduction reaction (ORR) and theoretical calculation prove the synergistic coupled electronic effect between N-Ti₃ C₂ and defective N-doped carbon active sites in the 2D sandwiched heterostructure. Compared with the control 2D samples (0.87-0.88 V, 4.90-5.15 mA cm^-2 ), the coupled 2D heterostructure possesses the best onset potential of 0.90 V and limited density current of 5.50 mA cm^-2 . Meanwhile, this catalyst exhibits superior methanol tolerance and cyclic durability. This design philosophy opens up a new thought for tailoring synergistic interlayer interactions between 2D materials.

2D materials for bone therapy

Due to their prominent physicochemical properties, 2D materials are broadly applied in biomedicine. Currently, 2D materials have achieved great success in treating many diseases such as cancer and tissue engineering as well as bone therapy. Based on their different characteristics, 2D materials could function in various ways in different bone diseases. Herein, the application of 2D materials in bone tissue engineering, joint lubrication, infection of orthopedic implants, bone tumors, and osteoarthritis are firstly reviewed comprehensively together. Meanwhile, different mechanisms by which 2D materials function in each disease reviewed below are also reviewed in detail, which in turn reveals the versatile functions and application of 2D materials. At last, the outlook on how to further broaden applications of 2D materials in bone therapies based on their excellent properties is also discussed.

2D Ti3C2Tx flakes prepared by in-situ HF etchant for simultaneous screening of carbamate pesticides

Present work reports preparation of colloidal single/few layer Ti₃C₂T_x MXene flakes using minimally intensive layer delamination (MILD) method for rapid electroanalytical screening of carbamate pesticides. Lithium fluoride salt and hydrochloric acid (7.5 M LiF/9M HCl) was used to produce in-situ generated HF as etchant to remove Al successfully from Ti₃AlC₂ MAX phase. Unlike the clay method (5 M LiF/6M HCl), this methodology simplified Ti₃C₂T_x synthesis protocol resulting in Li⁺ ions intercalated Ti₃C₂T_x which was delaminated without further sonication. The delaminated Ti₃C₂T_x flakes were found to be single/few layered sheets with mostly -OH and -O terminated surface groups. The characteristic 002 peak observed in X-ray diffraction (XRD) at 2θ = 6.4° with interplaner distance of 1.1137 nm suggested broadening of the peak attributed to the presence of Li⁺ ions between Ti₃C₂T_x flakes. Delaminated Ti₃C₂T_x flakes were utilized as working electrode which demonstrated simultaneous and selective detection of carbamate pesticides methiocarb and diethofencarb by voltammetry. The oxidation peaks of the two pesticides were well separated by a potential difference of 0.35 V in 0.5 M H₂SO₄ and DPV detection limits were calculated as 0.19 μg mL^-1 and 0.46 μg mL^-1 for methiocarb and diethofencarb respectively. Ti₃C₂T_x flakes as electrochemical sensor exhibited long term stability and acceptable recoveries in real sample for environmental applications.

Structure-activity correlation of Ti2CT2MXenes for C-H activation

As a bourgeoning class of 2D materials, MXenes have recently attracted significant attention within heterogeneous catalysis for promoting reactions such as hydrogen evolution and C-H activation. However, the catalytic activity of MXenes is highly dependent on the structural configuration including termination groups and their distribution. Therefore, understanding the relation between the structure and the activity is desired for the rational design of MXenes as high-efficient catalysts. Here, we present that the correlation between the structure and activity of Ti₂CT₂(T is a combination of O, OH and/or F) MXenes for C-H activation can be linked by a quantitative descriptor: the hydrogen affinity (E_H). A linear correlation is observed between the mean hydrogen affinity and the overall ratio of O terminations (x_O) in Ti₂CT₂MXenes, in which hydrogen affinity increases as thex_Odecreases, regardless to the species of termination groups. In addition, the hydrogen affinity is more sensitive to the presence of OH termination than F terminations. Moreover, the linear correlation between the hydrogen affinity and the activity of Ti₂CT₂MXenes for C-H activation of both -CH₃and -CH₂- groups can be extended to be valid for all three possible termination groups. Such a correlation provides fast prediction of the activity of general Ti₂CT₂MXenes, avoiding tedious activation energy calculations. We anticipate that the findings have the potential to accelerate the development of MXenes for heterogeneous catalysis applications.

Ion Implantation as an Approach for Structural Modifications and Functionalization of Ti3C2Tx MXenes

MXenes are a young family of two-dimensional transition metal carbides, nitrides, and carbonitrides with highly controllable structure, composition, and surface chemistry to adjust for target applications. Here, we demonstrate the modifications of two-dimensional MXenes by low-energy ion implantation, leading to the incorporation of Mn ions in Ti₃C₂T_x (where T_x is a surface termination) thin films. Damage and structural defects caused by the implantation process are characterized at different depths by XPS on Ti 2p core-level spectra, by ToF-SIMS, and with electron energy loss spectroscopy analyses. Results show that the ion-induced alteration of the damage tolerant Ti₃C₂T_x layer is due to defect formation at both Ti and C sites, thereby promoting the functionalization of these sites with oxygen groups. This work contributes to the inspiring approach of tailoring 2D MXene structure and properties through doping and defect formation by low-energy ion implantation to expand their practical applications.

Ti3C2 2D MXene: Recent Progress and Perspectives in Photocatalysis

In 2011, with the successful isolation of Ti₃C₂, a door of 2D layered MXene has been opened and received growing attention from researchers. MXene refers to a family of two-dimensional (2D) materials made up of atomic layers of the transition metal, carbide, nitrides, or carbonitrides. Given the large surface area, adjustable surface terminal groups, and excellent conductivity of MXene, it has shown exciting potential in photocatalysis, energy conversion, and many other fields. Among many 2D MXene, Ti₃C₂ was the most studied for its availability, low cost, facile modification procedure, and outstanding electronic properties. In previous investigations, Ti₃C₂ has shown huge potential in the photocatalysis area. Ti₃C₂ in a photocatalysis system can enhance the separation of photoinduced electrons and holes, reduce charge recombination, and thus improve the photocatalysis performance in many systems. To adjust the performance of Ti₃C₂ in different applications, the properties of Ti₃C₂ including morphology, structures, and stability are tunable by different post-processing method in the hybridized materials. In this review, an all-around understanding of the fabrication and modification methods of Ti₃C₂ and their connection to photocatalytic applications of Ti₃C₂ MXene based materials are presented. Moreover, a summary and our perspectives of Ti₃C₂ are given for further investigation.

Defect-Enhanced CO2 Reduction Catalytic Performance in O-Terminated MXenes

Electrochemical carbon dioxide reduction reaction (CO₂ RR) represents a promising way to generate fuels and chemical feedstock sustainably. Recently, studies have shown that two-dimensional metal carbides and nitrides (MXenes) can be promising CO₂ RR electrocatalysts due to the alternating -C and -H coordination with intermediates that decouples scaling relations seen on transition metal catalysts. However, further by tuning the electronic and surface structure of MXenes it should still be possible to reach higher turnover number and selectivities. To this end, defect engineering of MXenes for electrochemical CO₂ RR has not been investigated to date. In this work, first-principles modelling simulations are employed to systematically investigate CO₂ RR on M₂ XO₂ -type MXenes with transition metal and carbon/nitrogen vacancies. We found that the -C-coordinated intermediates take the form of fragments (e. g., *COOH, *CHO) whereas the -H-coordinated intermediates form a complete molecule (e. g., *HCOOH, *H₂ CO). Interestingly, the fragment-type intermediates become more strongly bound when transition-metal vacancies are present on most MXenes, while the molecule-type intermediates are largely unaffected, allowing the CO₂ RR overpotential to be tuned. The most promising defective MXene is Hf₂ NO₂ containing Hf vacancies, with a low overpotential of 0.45 V. More importantly, through electronic structure analysis it could be observed that the Fermi level of the MXene changes significantly in the presence of vacancies, indicating that the Fermi level shift can be used as an ideal descriptor to rapidly predict the catalytic performance of defective MXenes. Such an evaluation strategy is applicable to other catalysts beyond MXenes, which could enhance high throughput screening efforts for accelerated catalyst discovery.

Strain and electric field tuning of semi-metallic character WCrCO2MXenes with dual narrow band gap

Motivated by the recent successful synthesis of double-M carbides, we investigate structural and electronic properties of WCrC and WCrCO2monolayers and the effects of biaxial and out-of-plane strain and electric field using density functional theory. WCrC and WCrCO2monolayers are found to be dynamically stable. WCrC is metallic and WCrCO2display semi-metallic character with narrow band gap, which can be controlled by strain engineering and electric field. WCrCO2monolayer exhibits a dual band gap which is preserved in the presence of an electric field. The band gap of WCrCO2monolayer increases under uniaxial strain while it becomes metallic under tensile strain, resulting in an exotic 2D double semi-metallic behavior. Our results demonstrate that WCrCO2is a new platform for the study of novel physical properties in two-dimensional Dirac materials and which may provide new opportunities to realize high-speed low-dissipation devices.

Control of MXenes' electronic properties through termination and intercalation

MXenes are an emerging family of highly-conductive 2D materials which have demonstrated state-of-the-art performance in electromagnetic interference shielding, chemical sensing, and energy storage. To further improve performance, there is a need to increase MXenes' electronic conductivity. Tailoring the MXene surface chemistry could achieve this goal, as density functional theory predicts that surface terminations strongly influence MXenes' Fermi level density of states and thereby MXenes' electronic conductivity. Here, we directly correlate MXene surface de-functionalization with increased electronic conductivity through in situ vacuum annealing, electrical biasing, and spectroscopic analysis within the transmission electron microscope. Furthermore, we show that intercalation can induce transitions between metallic and semiconductor-like transport (transitions from a positive to negative temperature-dependence of resistance) through inter-flake effects. These findings lay the groundwork for intercalation- and termination-engineered MXenes, which promise improved electronic conductivity and could lead to the realization of semiconducting, magnetic, and topologically insulating MXenes.

Two-dimensional transition metal carbide (Ti3C2Tx) as an efficient adsorbent to remove cesium (Cs+)

Industrial utilization of nuclear resources greatly depends on the effective treatment of nuclear waste.

Applications of 2D MXenes in energy conversion and storage systems

This article provides a comprehensive review of MXene materials and their energy-related applications.

Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)

2D transition metal carbides, carbonitrides, and nitrides, known as MXenes, are a rapidly growing family of 2D materials with close to 30 members experimentally synthesized, and dozens more studied theoretically. They exhibit outstanding electronic, optical, mechanical, and thermal properties with versatile transition metal and surface chemistries. They have shown promise in many applications, such as energy storage, electromagnetic interference shielding, transparent electrodes, sensors, catalysis, photothermal therapy, etc. The high electronic conductivity and wide range of optical absorption properties of MXenes are the key to their success in the aforementioned applications. However, relatively little is currently known about their fundamental electronic and optical properties, limiting their use to their full potential. Here, MXenes' electronic and optical properties from both theoretical and experimental perspectives, as well as applications related to those properties, are discussed, providing a guide for researchers who are exploring those properties of MXenes.

Surface Functional Groups and Electrochemical Behavior in Dimethyl Sulfoxide-Delaminated Ti3 C2 Tx MXene

Functional groups in two-dimensional (2D) Ti₃ C₂ T_x MXene are an important factor influencing electrochemical performance in many applications involving energy storage, electrochemical sensors, and water purification. However, after dimethyl sulfoxide (DMSO) delamination, the effect of surface functionalities in Ti₃ C₂ T_x is still unclear and there are no systematic reports on its capacitive behavior. Experiments and theoretical calculations confirm the relationship between different surface functionalities, the DMSO delamination effect, and the electrochemical behavior of the DMSO-delaminated Ti₃ C₂ T_x . The dominant -O and -OH terminations are attributed for surfaces delaminated by using HF [Ti₃ C₂ T_x  (HF)] and LiF/HCl [Ti₃ C₂ T_x  (LiF/HCl)], respectively. Theoretical results are also in agreement with experimental results in that -OH terminations are essential for the formation of a free-standing film. Compared to non-delaminated Ti₃ C₂ T_x  (HF) (similar O/F ratios of 1.37 and 1.42), there is a significant DMSO delamination effect for Ti₃ C₂ T_x  (LiF/HCl) because of different O/F ratios of 2.9 and 3.6. Additionally, the delaminated Ti₃ C₂ T_x  (LiF/HCl) electrodes deliver a higher capacitance of 508 F cm^-3 than that of 333 F cm^-3 for the delaminated Ti₃ C₂ T_x  (HF), although it exhibited lower equivalent series resistance, lower interlayer spacing, and slightly lower specific surface area. This study provides direct and systematic experimental evidence for different functional groups in Ti₃ C₂ T_x MXene based on the DMSO delamination effect.

Tunable Multipolar Surface Plasmons in 2D Ti3C2 T x MXene Flakes

2D Ti₃C₂ T _x MXenes were recently shown to exhibit intense surface plasmon (SP) excitations; however, their spatial variation over individual Ti₃C₂ T _x flakes remains undiscovered. Here, we use scanning transmission electron microscopy (STEM) combined with ultra-high-resolution electron energy loss spectroscopy (EELS) to investigate the spatial and energy distribution of SPs (both optically active and forbidden modes) in mono- and multilayered Ti₃C₂ T _x flakes. With STEM-EELS mapping, the inherent interband transition in addition to a variety of transversal and longitudinal SP modes (ranging from visible down to 0.1 eV in MIR) are directly visualized and correlated with the shape, size, and thickness of Ti₃C₂ T _x flakes. The independent polarizability of Ti₃C₂ T _x monolayers is unambiguously demonstrated and attributed to their unusual weak interlayer coupling. This characteristic allows for engineering a class of nanoscale systems, where each monolayer in the multilayered structure of Ti₃C₂ T _x has its own set of SPs with distinctive multipolar characters. Moreover, the tunability of the SP energies is highlighted by conducting in situ heating STEM to monitor the change of the surface functionalization of Ti₃C₂ T _x through annealing at temperatures up to 900 °C. At temperatures above 500 °C, the observed fluorine (F) desorption multiplies the metal-like free electron density of Ti₃C₂ T _x flakes, resulting in a monotonic blue-shift in the SP energy of all modes. These results underline the great potential for the development of Ti₃C₂ T _x-based applications, spanning the visible-MIR spectrum, relying on the excitation and detection of single SPs.

Surface Functional Groups and Interlayer Water Determine the Electrochemical Capacitance of Ti3C2 T x MXene

MXenes, an emerging class of conductive two-dimensional materials, have been regarded as promising candidates in the field of electrochemical energy storage. The electrochemical performance of their representative Ti₃C₂ T _x, where T represents the surface termination group of F, O, or OH, strongly relies on termination-mediated surface functionalization, but an in-depth understanding of the relationship between them remains unresolved. Here, we studied comprehensively the structural feature and electrochemical performance of two kinds of Ti₃C₂ T _x MXenes obtained by etching the Ti₃AlC₂ precursor in aqueous HF solution at low concentration (6 mol/L) and high concentration of (15 mol/L). A significantly higher capacitance was recognized in a low-concentration HF-etched MXene (Ti₃C₂ T _x-6M) electrode. In situ Raman spectroscopy and X-ray photoelectron spectroscopy demonstrate that Ti₃C₂ T _x-6M has more components of the -O functional group. In combination with X-ray diffraction analysis, low-field ¹H nuclear magnetic resonance spectroscopy in terms of relaxation time unambiguously underlines that Ti₃C₂ T _x-6M is capable of accommodating more high-mobility H₂O molecules between the Ti₃C₂ T _x interlayers, enabling more hydrogen ions to be more readily accessible to the active sites of Ti₃C₂ T _x-6M. The two main key factors ( i.e., high content of -O functional groups that are involved bonding/debonding-induced pseudocapacitance and more high-mobility water intercalated between the MXene interlayers) simultaneously account for the superior capacitance of the Ti₃C₂ T _x-6M electrode. This study provides a guideline for the rational design and construction of high-capacitance MXene and MXene-based hybrid electrodes in aqueous electrolytes.

Recent Advances in Layered Ti3 C2 Tx MXene for Electrochemical Energy Storage

Ti₃ C₂ T_x , a typical representative among the emerging family of 2D layered transition metal carbides and/or nitrides referred to as MXenes, has exhibited multiple advantages including metallic conductivity, a plastic layer structure, small band gaps, and the hydrophilic nature of its functionalized surface. As a result, this 2D material is intensively investigated for application in the energy storage field. The composition, morphology and texture, surface chemistry, and structural configuration of Ti₃ C₂ T_x directly influence its electrochemical performance, e.g., the use of a well-designed 2D Ti₃ C₂ T_x as a rechargeable battery anode has significantly enhanced battery performance by providing more chemically active interfaces, shortened ion-diffusion lengths, and improved in-plane carrier/charge-transport kinetics. Some recent progresses of Ti₃ C₂ T_x MXene are achieved in energy storage. This Review summarizes recent advances in the synthesis and electrochemical energy storage applications of Ti₃ C₂ T_x MXene including supercapacitors, lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries. The current opportunities and future challenges of Ti₃ C₂ T_x MXene are addressed for energy-storage devices. This Review seeks to provide a rational and in-depth understanding of the relation between the electrochemical performance and the nanostructural/chemical composition of Ti₃ C₂ T_x , which will promote the further development of 2D MXenes in energy-storage applications.

MXene molecular sieving membranes for highly efficient gas separation

Molecular sieving membranes with sufficient and uniform nanochannels that break the permeability-selectivity trade-off are desirable for energy-efficient gas separation, and the arising two-dimensional (2D) materials provide new routes for membrane development. However, for 2D lamellar membranes, disordered interlayer nanochannels for mass transport are usually formed between randomly stacked neighboring nanosheets, which is obstructive for highly efficient separation. Therefore, manufacturing lamellar membranes with highly ordered nanochannel structures for fast and precise molecular sieving is still challenging. Here, we report on lamellar stacked MXene membranes with aligned and regular subnanometer channels, taking advantage of the abundant surface-terminating groups on the MXene nanosheets, which exhibit excellent gas separation performance with H2 permeability >2200 Barrer and H2/CO2 selectivity >160, superior to the state-of-the-art membranes. The results of molecular dynamics simulations quantitatively support the experiments, confirming the subnanometer interlayer spacing between the neighboring MXene nanosheets as molecular sieving channels for gas separation.

Structural formation and charge storage mechanisms for intercalated two-dimensional carbides MXenes

An effective procedure based on the first-principles calculations is developed to reveal the formation mechanisms of the intercalated MXenes.