Antibacterial mechanisms of graphene-based composite nanomaterials

Strategies for Overcoming Bacterial Resistance to Nanoparticles: A Systematic Review

The increasing prevalence of bacterial resistance to conventional antimicrobial agents and nanoparticles (NPs) has become a critical global health challenge. This systematic review aimed to evaluate strategies for overcoming bacterial resistance to nanoparticles by synthesizing evidence on nanoparticle composition, functionalization, and targeted resistance mechanisms. A comprehensive literature search of studies published between 2000 and 2025 was conducted, focusing on experimental designs assessing antimicrobial efficacy, biofilm disruption, and efflux pump inhibition. The reviewed studies highlighted advanced nanoparticle formulations, including silver-cyanographene conjugates, lanthanum-functionalized graphene oxide, and carbon nanogels, which demonstrated enhanced efficacy against resistant bacterial strains. Key findings emphasized the role of surface functionalization, nanoparticle size modulation, and combination therapies in mitigating resistance. Functionalized nanoparticles effectively disrupted biofilm matrices, inhibited efflux pumps, and enhanced intracellular penetration, reducing bacterial survival rates. Despite promising results, challenges remain, including variability in nanoparticle formulations, limited scalability, and long-term ecological impacts. This review underscores the potential of innovative nanoparticle designs and combination therapies to combat bacterial resistance and emphasizes the need for standardized protocols and clinical translation.

Synthesis of metal nanoparticles on graphene oxide and antibacterial properties

Pathogen-induced infections and the rise of antibiotic-resistant bacteria, such as Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), pose significant global health challenges, emphasizing the need for new antimicrobial strategies. In this study, we synthesized graphene oxide (GO)-based composites functionalized with silver nanoparticles (AgNPs) and copper nanoparticles (CuNPs) as potential alternatives to traditional antibiotics. The objective is to assess the antibacterial properties of these composites and explore their efficacy against E. coli and S. aureus, two common bacterial pathogens. The composites are prepared using eco-friendly and conventional methods to ensure effective nanoparticle attachment to the GO surface. Structural and morphological characteristics are confirmed through SEM, AFM, EDS, XRD, UV-vis, FTIR, and Raman spectroscopy. The antibacterial efficacy of the composites is tested through disk diffusion assays, colony-forming unit (CFU) counts, and turbidimetry analysis, with an emphasis on understanding the effects of different nanoparticle concentrations. The results demonstrated a dose-dependent antibacterial effect, with GO/AgNP-1 showing superior antibacterial activity over GO/AgNP-2, particularly at lower concentrations (32.0 μg/mL and 62.5 μg/mL). The GO/CuNP composite also exhibited significant antibacterial properties, with optimal performance at 62.5 μg/mL for both bacterial strains. Turbidimetry analysis confirmed the inhibition of bacterial growth, especially at moderate concentrations, although slight nanoparticle aggregation at higher doses reduced efficacy. Lastly, both GO/AgNP and GO/CuNP composites demonstrated significant antibacterial potential. The results emphasize the need to fine-tune nanoparticle concentration and refine synthesis techniques to improve their efficacy, positioning these composites as strong contenders for antimicrobial use.

Graphene-based metal/metal oxide nanocomposites as potential antibacterial agents: a mini-review

Antimicrobial resistance (AMR) is a rising issue worldwide, which is increasing prolonged illness and mortality rates in the population. Similarly, bacteria have generated multidrug resistance (MDR) by developing various mechanisms to cope with existing antibiotics and therefore, there is a need to develop new antibacterial and antimicrobial agents. Biocompatible nanomaterials like graphene and its derivatives, graphene oxide (GO), and reduced graphene oxide (rGO) loaded with metal/metal oxide nanoparticles have been explored as potential antibacterial agents. It is observed that nanocomposites of GO/rGO and metal/metal oxide nanoparticles can result in the synthesis of less toxic, more stable, controlled size, uniformly distributed, and cost-effective nanomaterials compared to pure metal nanoparticles. Antibacterial studies of these nanocomposites show their considerable potential as antibacterial and antimicrobial agents, however, issues like the mechanism of antimicrobial action and their cytotoxicity need to be explored in detail. This review highlights a comparative analysis of graphene-based metal and metal oxide nanoparticles as potential antibacterial agents against AMR and MDR.

Photocatalytic Generation of Singlet Oxygen by Graphitic Carbon Nitride for Antibacterial Applications

Carbon-based functional nanocomposites have emerged as potent antimicrobial agents and can be exploited as a viable option to overcome antibiotic resistance of bacterial strains. In the present study, graphitic carbon nitride nanosheets are prepared by controlled calcination of urea. Spectroscopic measurements show that the nanosheets consist of abundant carbonyl groups and exhibit apparent photocatalytic activity under UV photoirradiation towards the selective production of singlet oxygen. Therefore, the nanosheets can effectively damage the bacterial cell membranes and inhibit the growth of bacterial cells, such as Gram-negative Escherichia coli, as confirmed in photodynamic, fluorescence microscopy, and scanning electron microscopy measurements. The results from this research highlight the unique potential of carbon nitride derivatives as potent antimicrobial agents.

Emerging trends and future challenges of advanced 2D nanomaterials for combating bacterial resistance

The number of multi-drug-resistant bacteria has increased over the last few decades, which has caused a detrimental impact on public health worldwide. In resolving antibiotic resistance development among different bacterial communities, new antimicrobial agents and nanoparticle-based strategies need to be designed foreseeing the slow discovery of new functioning antibiotics. Advanced research studies have revealed the significant disinfection potential of two-dimensional nanomaterials (2D NMs) to be severed as effective antibacterial agents due to their unique physicochemical properties. This review covers the current research progress of 2D NMs-based antibacterial strategies based on an inclusive explanation of 2D NMs' impact as antibacterial agents, including a detailed introduction to each possible well-known antibacterial mechanism. The impact of the physicochemical properties of 2D NMs on their antibacterial activities has been deliberated while explaining the toxic effects of 2D NMs and discussing their biomedical significance, dysbiosis, and cellular nanotoxicity. Adding to the challenges, we also discussed the major issues regarding the current quality and availability of nanotoxicity data. However, smart advancements are required to fabricate biocompatible 2D antibacterial NMs and exploit their potential to combat bacterial resistance clinically.

Evaluation of the Antibacterial, Anti-Cervical Cancer Capacity, and Biocompatibility of Different Graphene Oxides

Cancer stands as one of the deadliest diseases in human history, marked by an inferior prognosis. While traditional therapeutic methods like surgery, chemotherapy, and radiation have demonstrated success in inhibiting tumor cell growth, their side effects often limit overall benefits and patient acceptance. In this regard, three different graphene oxides (GO) with variations in their degrees of oxidation were studied chemically and tissue-wise. The accuracy of the synthesis of the different GO was verified by robust techniques using X-ray photoelectron spectroscopy (XPS), as well as conventional techniques such as infrared spectroscopy (FTIR), RAMAN spectroscopy, and X-ray diffraction (XRD). The presence of oxygenated groups was of great importance. It affected the physicochemical properties of each of the different graphene oxides demonstrated in the presence of new vibrational modes related to the formation of new bonds promoted by the graphitization of the materials. The toxicity analysis in the Hep-2 cell line of graphene oxide formulations at 250 µg/mL on the viability and proliferation of these tumor cells showed low activity. GO formulations did not show high antibacterial activity against Staphylococcus aureus and Escherichia coli strains. However, the different graphene oxides showed biocompatibility in the subdermal implantation model for 30, 60, and 90 days in the biomodels. This allowed healing by restoring hair and tissue architecture without triggering an aggressive immune response.

Chitosan biopolymer functionalized with graphene oxide and titanium dioxide with Escin metallic nanocomposites for anticancer potential against colon cancer

Our study produced GO-TiO2-chitosan-escin nanocomposites (GTCEnc), characterized them using physical and biological methods, and evaluated their potential as cancer treatment candidates. Standard protocols were used to produce GTCEnc. Nanocomposites are created using XRD, FTIR, UV-Vis, and PL spectroscopy analysis. The morphology and ultrastructure of nanocomposites were investigated using SEM and TEM. Nanocomposites containing TiO2, GO, chitosan, and escin nanostructures were characterized using diffraction, microscopy, and spectroscopy; the antimicrobial activity of GTCEnc was investigated. Various methods were used to test the anticancer activity of GTCEnc against COLO 205 cell lines, including MTT, EtBr/AO, DAPI, JC-1, Annexin-V/FITC, cell cycle analysis, and activation of pro-apoptotic markers, such as caspase-3, -8, and -9. The nanocomposites were cytotoxic to COLO 205 cells, with an IC50 of 22.68 μg/mL, but not to 293T cells. In cells treated with nanomaterials, cytotoxicity, nuclear damage, apoptosis induction, and free radical production were significantly increased. Our finding suggests that GTCEnc has potent anticancer and antibacterial activity in vitro because of its unique nanocomposite properties and antibacterial and anticancer activity in vitro. Additional research is required to understand the clinical efficacy of these nanocomposites.

Graphene-Based Nanomaterials and Their Interactions with Lipid Membranes

Graphene-based nanomaterials (GNMs) have captured increasing attention in the recent advancement of materials science and nanotechnology owing to their excellent physicochemical properties. Despite having unquestionable advances, the application of GNMs in biological and medical sciences is still limited due to the lack of knowledge and precise control over their interaction with the biological milieu. The cellular membrane is the first barrier with which GNMs interact before entering a cell. Therefore, understanding how they interact with cell membranes is important from the perspective of safe use in biological and biomedical fields. In this review, we systematically summarize the recent efforts in predicting the interactions between GNMs and model cellular membranes. This review provides insights into how GNMs interact with lipid membranes and self-assemble in and around them. Both the computational simulations and experimental observations are summarized. The interactions are classified depending on the physicochemical properties (structure, chemistry, and orientation) of GNMs and various model membranes. The thermodynamic parameters, structural details, and supramolecular forces are listed to understand the interactions which would help circumvent potential risks and provide guidance for safe use in the future. At the end of this review, future prospective and emerging challenges in this research field are discussed.

A Synergistic Antibacterial Study of Copper-Doped Polydopamine on Ti3C2Tx Nanosheets with Enhanced Photothermal and Fenton-like Activities

In response to the trend of drug-resistant and super bacteria, the existing single antibacterial methods are not sufficient to kill bacteria, and the development of multifunctional antibacterial nanomaterials is urgent. Our study aims to construct copper-doped polydopamine-coated Ti3C2Tx (CuPDA@Ti3C2Tx) with an enhanced photothermal property and Fenton-like activity. The nanocomposite hydrogel consisting of CuPDA@Ti3C2Tx and alginate can improve the antioxidant activity of two-dimensional MXene nanosheets by coating them with a thin layer of PDA nanofilm. Meanwhile, Cu ions are adsorbed through the coordination of PDA-rich oxygen-containing functional groups and amino groups. Calcium ions were further used to crosslink sodium alginate to obtain antibacterial hydrogel materials with combined chemotherapy and photothermal therapy properties. The photothermal conversion efficiency of CuPDA@Ti3C2Tx is as high as 57.7% and the antibacterial rate of Escherichia coli reaches 96.12%. The photothermal effect leads to oxidative stress in bacteria, increases cell membrane permeability, and a high amount of ROS and copper ions enter the interior of the bacteria, causing protein denaturation and DNA damage, synergistically leading to bacterial death. Our study involves a multifunctional synergistic antibacterial nanodrug platform, which is conducive to the development of high-performance antibacterial agents and provides important research ideas for solving the problem of drug-resistant bacteria.

Synthesis of copper-reduced graphene oxide nanomaterials using glucose and study of its antibacterial and anticancer activities

In this work, glucose-capped copper nanoparticles decorated reduced graphene oxide nanomaterial are synthesized at 100 °C and 200 °C via chemical reduction method and studied for their antibacterial and anticancer activities. Synthesized nanomaterials were characterized using x-ray diffraction, Fourier-transform infrared, transmission electron microscope, and RAMAN. It is observed in transmission electron microscopy and selected area electron diffraction studies that copper nanoparticles deposited onto reduced graphene oxide are smaller than nanoparticles generated in the absence of reduced graphene oxide. Also, the size of copper nanoparticles synthesized at 200 °C is smaller than at 100 °C. Results suggest that Cu/Glu/rGO synthesized at both temperatures showed significant antibacterial activity againstEscherichia coliandBacillus anthracis,similarly, showed significant cell death in cancer cell lines [Cal33 and HCT-116 p53 (+/+)]. Interestingly, the nanomaterials were seen to be more effective against the cancer cell lines harboring aggregating mutant p53. Tumors with aggregating mutants of p53 are difficult to treat hence, Cu/Glu/rGO can be promising therapeutic agents against these difficult cancers. However, the antibacterial and anticancer activity of Cu/Glu/rGO synthesized at 100 °C where Cu2O form is obtained was found to be more effective compared to Cu/Glu/rGO synthesized at 200 °C where Cu form is obtained. Though fine-tuning of the material may be required for its commercial applications.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Recent Strategies and Future Recommendations for the Fabrication of Antimicrobial, Antibiofilm, and Antibiofouling Biomaterials

Biomaterials and biomedical devices induced life-threatening bacterial infections and other biological adverse effects such as thrombosis and fibrosis have posed a significant threat to global healthcare. Bacterial infections and adverse biological effects are often caused by the formation of microbial biofilms and the adherence of various biomacromolecules, such as platelets, proteins, fibroblasts, and immune cells, to the surfaces of biomaterials and biomedical devices. Due to the programmed interconnected networking of bacteria in microbial biofilms, they are challenging to treat and can withstand several doses of antibiotics. Additionally, antibiotics can kill bacteria but do not prevent the adsorption of biomacromolecules from physiological fluids or implanting sites, which generates a conditioning layer that promotes bacteria's reattachment, development, and eventual biofilm formation. In these viewpoints, we highlighted the magnitude of biomaterials and biomedical device-induced infections, the role of biofilm formation, and biomacromolecule adhesion in human pathogenesis. We then discussed the solutions practiced in healthcare systems for curing biomaterials and biomedical device-induced infections and their limitations. Moreover, this review comprehensively elaborated on the recent advances in designing and fabricating biomaterials and biomedical devices with these three properties: antibacterial (bacterial killing), antibiofilm (biofilm inhibition/prevention), and antibiofouling (biofouling inhibition/prevention) against microbial species and against the adhesion of other biomacromolecules. Besides we also recommended potential directions for further investigations.

NIR-dependent photothermal-photodynamic synergistic antibacterial mechanism for titanium carbide nanosheets intercalated and delaminated by tetramethylammonium hydroxide

The infectious disease epidemics caused by pathogens are a serious and growing worldwide public health problem. More seriously, the multiple resistant bacteria extensively spread in hospitals or communities due to antibiotic abuse. In this paper, we fabricate two-dimensional Ti₃C₂ nanosheets with excellent biocompatibility and photothermal-photodynamic synergistic antibacterial activity against E. coli and S. aureus based on the strategy of tetramethylammonium hydroxide (TMAOH)-driven intercalation and delamination. Compared with the traditional Ti₃C₂ nanosheets exfoliated by HF or situ HF (HCl + LiF), the photothermal-photodynamic Ti₃C₂ nanosheets show higher synergistic antibacterial efficiency. In addition, the antibacterial mechanism demonstrates that biofilm disruption and leakage of bacterial contents contribute to reactive oxygen species reaction (ROS) and photothermal antibacterial activity irradiated by NIR after most Ti₃C₂ nanosheets adhering to target bacteria. In conclusion, the Ti₃C₂ nanosheets have great potential as an effective antibacterial material without causing drug resistance, relying on intercalating and delaminating by TMAOH.

Bactericidal Activity of Graphene Oxide Tests for Selected Microorganisms

The aim of this study was to determine the bactericidal potential of graphene oxide (GO) in contact with four species of bacteria: E. coli, S. mutans, S. aureus and E. faecalis. Bacterial cell suspensions of each species were incubated in a medium containing GO, with incubation times of 5, 10, 30 and 60 min, at final concentrations of 50, 100, 200, 300 and 500 μg/mL. The cytotoxicity of GO was evaluated using live/dead staining. The results were recorded using a BD Accuri C6 flow cytofluorimeter. Obtained data were analyzed using BD CSampler software. A significant bacteria viability reduction was noted in all GO-containing samples. The antibacterial properties of GO were strongly influenced by GO concentration and incubation time. The highest bactericidal activity was observed at concentrations of 300 and 500 μg/mL for all incubation times (5, 10, 30 and 60 min). The highest antimicrobial potential was observed for E. coli: after 60 min, the mortality rate was 94% at 300 µg/mL GO and 96% at 500 µg/mL GO; the lowest was found for S. aureus-49% (300 µg/mL) and 55% (500 µg/mL).

Graphene oxide reinforced chitosan/polyvinyl alcohol antibacterial coatings on stainless steel surfaces exhibit superior bioactivity without human cell cytotoxicity

The study proposes an alternative therapeutics to diminish bacterial attachment in biomedical implants by modifying their surface with passive coatings. A uniform, thin-film of chitosan/polyvinyl alcohol/graphene oxide (CS/PVA/GO) was coated on 316 L stainless steel (SS) surface through spread casting followed by solvent evaporation. The abundant anchoring sites available at macromolecular interfaces of chitosan/PVA matrix facilitated a smooth, dense loading of GO. The effect of GO content on physicochemical features, antibacterial potential, and biocompatibility of coatings was thoroughly studied. The hybrid films displayed good adhesion behavior, and UV-protection ability with desired mechanical and thermal stability when coated on SS surface. Coatings manifested a 1.5-1.7 fold rise in antibacterial efficacy against Staphylococcus epidermidis and Staphylococcus aureus and exhibited a permanent biocidal response after 6 h of contact-active behaviour. We investigated a 3-fold generation of reactive oxygen species as the predominant antibacterial mechanism, which diminishes bacterial integrity by inducing protein leakage (8.5-9 fold higher) and suppressing respiratory chain activity as two secondary mechanisms. All coatings with varying GO content appeared non-haemolytic (<2%) with ultra-low cytotoxicity (<29.08%) against human hepatocellular carcinoma (HepG2) and peripheral blood mononuclear cells. The degradation rate of coatings in simulated body fluid exhibited a higher stability, indicated by a lower weight loss (69-78%) and a decrease in pH values as the GO content in coatings increased from 0.05 to 0.15 wt%. Such anti-infective coating is a step forward in inhibiting bacterial colonization on SS surfaces to extend its lifespan.

Biosynthesis of Iron Oxide Nanoparticles Using Leaf Extract of Ruellia tuberosa: Mechanical and Dynamic Mechanical Behaviour Kevlar-Based Hybrid Epoxy Composites

One of the more enticing, ecologically responsible, as well as safe and sustainable methodologies is eco-friendly nanomaterial synthesis. Vegetation materials will be used as reductants instead of toxic substances for synthesising nanoparticles. The current study used Ruellia tuberosa (RT) leaf extract digest to synthesise FeO nanomaterials, which were then characterised using XRD. Following that, microbially produced FeO molecules were mixed with a Kevlar-based polymeric matrix to study the blended consequences. To examine the interbreeding, the current experimental analyses were performed, including both static and dynamic mechanical characteristics. The addition of FeO nanofillers improved the elastic modulus, tensile strength, and storage modulus of the nanocomposite. Impact force uptake has been raised to a certain extent by the addition of nanoparticles. The findings of this research show that incorporating FeO nanofillers into Kevlar fabrics is a promising technique for increasing the mechanical characteristics of hybrid laminated composites. As per DMA evaluation, the sample without nanomaterials had a more volcanic lava response, which is a useful thing for body systems for missile use. Another critical aspect of a nanoparticles-filled nanocomposite that must be addressed is the relatively uniform scattering of padding as well as the development of interfacial adhesion in such a combination. The presence of FeO fillers in polymeric composites is confirmed by XRD analysis.

Synthesis of Graphene Quantum Dot Magnesium Hydroxide Nanocomposites and Investigation of Their Antioxidant and Antimicrobial Activities

In this paper, we synthesized graphene quantum dots magnesium hydroxide nanocomposites (GQDs/Mg(OH)₂). The synthesized nanocomposites were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Malvern Zetasizer. The antimicrobial and antioxidant properties of the obtained GQDs/Mg(OH)₂ nanocomposites were investigated. GQDs/Mg(OH)₂ nanocomposites have MIC values of 15.625 μg/mL against fungi (C. metapsilosis and C. parapsilosis) and 62.5 μg/mL against Gram (+) (S. pneumonia and E. faecalis) and Gram (-) (E. coli). The synthesized GQDs/Mg(OH)₂ nanocomposites showed moderate antioxidant activity. The results showed that at 100-µg/mL GQDs/Mg(OH)₂ nanocomposite concentration, the H₂O₂ scavenging activity was 62.18%.

Implantable biomedical materials for treatment of bone infection

The treatment of bone infections has always been difficult. The emergence of drug-resistant bacteria has led to a steady decline in the effectiveness of antibiotics. It is also especially important to fight bacterial infections while repairing bone defects and cleaning up dead bacteria to prevent biofilm formation. The development of biomedical materials has provided us with a research direction to address this issue. We aimed to review the current literature, and have summarized multifunctional antimicrobial materials that have long-lasting antimicrobial capabilities that promote angiogenesis, bone production, or "killing and releasing." This review provides a comprehensive summary of the use of biomedical materials in the treatment of bone infections and a reference thereof, as well as encouragement to perform further research in this field.

Silver nanoparticles loaded graphene-poly-vinylpyrrolidone composites as an effective recyclable antimicrobial agent

Silver nanoparticles (AgNPs) are often used as antibacterial agents. Here, graphene-silver nanoparticles (G-Ag) and graphene-silver nanoparticles poly-vinylpyrrolidone (G-AgPVPy) were prepared by chemical reduction and in-situ polymerization of vinylpyrrolidone (VPy). The prepared G-Ag and G-AgPVPy composites were characterized using various techniques. The size of the AgNPs on the graphene surface in the prepared G-Ag and G-AgPVPy composites was measured as ∼20 nm. The graphene sheets size in the G-Ag and G-AgPVPy composites were measured as 6.0-2.0 μm and 4.0-0.10 μm, respectively, which are much smaller than graphene sheets in graphite powder (GP) (10.0-3.0 μm). The physicochemical analysis confirmed the formation of G-Ag and G-AgPVPy composites and even the distribution of AgNPs and PVPy on the graphene sheets. The synthesized composites (G-AgPVPy, G-Ag) exhibited a broad-spectrum antibacterial potential against both Gram-negative and Gram-positive bacteria. The lowest minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values were calculated as >40 μg/mL using G-Ag and GP, while G-AgPVPy showed as 10 μg/mL against Staphylococcus aureus. Among GP, G-Ag, and G-AgPVPy, G-AgPVPy disturbs the cell permeability, damages the cell walls, and causes cell death efficiently. Also, G-AgPVPy was delivered as a significant reusable antibacterial potential candidate. The MIC value (10 μg/mL) did not change up to six subsequent MIC analysis cycles.

Silver Nanoparticles Functionalized Nanosilica Grown over Graphene Oxide for Enhancing Antibacterial Effect

The continuous growth of multidrug-resistant bacteria due to the overuse of antibiotics and antibacterial agents poses a threat to human health. Silver nanoparticles, silica-based materials, and graphene-based materials have become potential antibacterial candidates. In this study, we developed an effective method of enhancing the antibacterial property of graphene oxide (GO) by growing nanosilica (NS) of approximately 50 nm on the graphene oxide (GO) surface. The structures and compositions of the materials were characterized through powdered X-ray diffraction (P-XRD), transmission electron microscopy (TEM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS), ultraviolet-visible spectroscopy (UV-VIS), dynamic light scattering (DLS), Raman spectroscopy (RM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmet-Teller (BET) surface area, and pore size determination. The silver nanoparticles (AgNPs) with an average diameter of 26 nm were functionalized on the nanosilica (NS) surface. The composite contained approximately 3% of silver nanoparticles. The silver nanoparticles on nanosilica supported over graphene oxide (GO/NS/AgNPs) exhibited a 7-log reduction of Escherichia coli and a 5.2-log reduction of Bacillus subtilis within one hour of exposure. Both GO/NS and GO/NS/AgNPs exhibited substantial antimicrobial effects against E. coli and B. subtilis.

Metal-based nano-delivery platform for treating bone disease and regeneration

Owing to their excellent characteristics, such as large specific surface area, favorable biosafety, and versatile application, nanomaterials have attracted significant attention in biomedical applications. Among them, metal-based nanomaterials containing various metal elements exhibit significant bone tissue regeneration potential, unique antibacterial properties, and advanced drug delivery functions, thus becoming crucial development platforms for bone tissue engineering and drug therapy for orthopedic diseases. Herein, metal-based drug-loaded nanomaterial platforms are classified and introduced, and the achievable drug-loading methods are comprehensively generalized. Furthermore, their applications in bone tissue engineering, osteoarthritis, orthopedic implant infection, bone tumor, and joint lubrication are reviewed in detail. Finally, the merits and demerits of the current metal-based drug-loaded nanomaterial platforms are critically discussed, and the challenges faced to realize their future applications are summarized.

Fast Synthesis of Graphene Oxide-β-Lactam as a Residue-Free Environmental Bacterial Inhibitor

Common pathogenic bacteria contaminate the environment through various modes of transmission. It is thus crucial to develop simple preparation methods of residue-free environmental disinfectants. β-Lactam antibiotics are frequently prescribed in clinical practice to treat bacterial infections. In this study, we used electrochemical exfoliation to synthesize graphene oxide (GO) with abundant ketene functional groups. A residue-free GO-β-lactam (GOβL) was subsequently obtained by mixing ketene and azomethine-H via a [2 + 2] cycloaddition reaction in the aqueous phase. GOβL has shown broad-spectrum bacterial inhibition against four bacteria (Staphylococcus aureus, Escherichia coli, Salmonella enterica, and Shigella dysenteriae), and it degrades rapidly within 24 h. This study provides a fast and easy method for the synthesis of GOβL, which can be employed as a promising environmental bacteriostatic disinfectant in real-life applications.

Antibacterial amorphous magnesium phosphate/graphene oxide for accelerating bone regeneration

Magnesium phosphates (MgP)s have attracted interest as an alternative biomaterial compared to the calcium phosphate (CaP)s compounds in the bone regeneration application in terms of their prominent biodegradability, lack of cytotoxicity, and ability of bone repair stimulation. Among them, amorphous magnesium phosphates (AMP)s indicated a higher rate of resorption, while preserving high osteoblasts viability and proliferation, which is comparable to their CaP peers. However, fast degradation of AMP leads to the initial fast release of Mg²⁺ ions and adverse effects on its excellent biological features. It seems that the addition of graphene oxide (GO) to magnesium phosphate can moderate its degradation rate. Hence, a novel in situ synthesized AMP powders containing 0.05, 0.25, 0.5, and 1 wt% of graphene oxide (AMP/GO) were developed to achieve a favorable degradation rate, desirable antibacterial properties against both Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) accompanying with proper cell viability and proliferation. The incorporation of 0.5 wt% of graphene oxide into the AMP ceramic led to reduce the release of Mg²⁺ ions from 571.2 ± 12.9 mg/L to 372.8 ± 14.7 mg/L and P ions from 354.8 ± 11.9 mg/L to 245.3 ± 9.9 mg/L, at day 10 of immersion in PBS. Besides, AMP/0.5 GO bioceramics were capable of eradicating all bacterial colonies of both strains. On the other hand, MG63 cells viability went up from 143.46% ± 7.54 to 184.46% ± 11.54 on the 7th day of culture in the presence of 0.5 wt% of GO compared to pure AMP ceramic. Furthermore, alizarin red staining and alkaline phosphatase (ALP) activity demonstrated the ability of AMP/GO to maintain the osteogenic phenotype of MG63 cells during 7 days culture. Therefore, it can be concluded that well distributed and in situ synthesized AMP/0.5GO powders can be a promising biomaterial for bone tissue regeneration.

Graphene oxide/gallium nanoderivative as a multifunctional modulator of osteoblastogenesis and osteoclastogenesis for the synergistic therapy of implant-related bone infection

Currently, implant-associated bacterial infections account for most hospital-acquired infections in patients suffering from bone fractures or defects. Poor osseointegration and aggravated osteolysis remain great challenges for the success of implants in infectious scenarios. Consequently, developing an effective surface modification strategy for implants is urgently needed. Here, a novel nanoplatform (GO/Ga) consisting of graphene oxide (GO) and gallium nanoparticles (GaNPs) was reported, followed by investigations of its in vitro antibacterial activity and potential bacterium inactivation mechanisms, cytocompatibility and regulatory actions on osteoblastogenesis and osteoclastogenesis. In addition, the possible molecular mechanisms underlying the regulatory effects of GO/Ga nanocomposites on osteoblast differentiation and osteoclast formation were clarified. Moreover, an in vivo infectious microenvironment was established in a rat model of implant-related femoral osteomyelitis to determine the therapeutic efficacy and biosafety of GO/Ga nanocomposites. Our results indicate that GO/Ga nanocomposites with excellent antibacterial potency have evident osteogenic potential and inhibitory effects on osteoclast differentiation by modulating the BMP/Smad, MAPK and NF-κB signaling pathways. The in vivo experiments revealed that the administration of GO/Ga nanocomposites significantly inhibited bone infections, reduced osteolysis, promoted osseointegration located in implant-bone interfaces, and resulted in satisfactory biocompatibility. In summary, this synergistic therapeutic system could accelerate the bone healing process in implant-associated infections and can significantly guide the future surface modification of implants used in bacteria-infected environments.

MoS2 based nanomaterials: Advanced antibacterial agents for future

Bacterial infections are yet another serious threat to human health. Misuse or overuse of conventional antibiotics has led to the arrival of various super resistant bacteria along with many serious side effects to human body. In this exigent circumstance, the use of nanomaterial based antibacterial agents is one of the most appropriate solutions to fight against bacteria thereby causing an inhibition to bacterial proliferation. Recent studies show that, due to the large surface area, high biocompatibility, strong near-infrared (NIR) absorption and low cytotoxicity, molybdenum disulphide (MoS₂), an extraordinary member in the transition metal dichalcogenides (TMDs) is extensively explored in the obliteration of many drug resistant bacteria, photothermal therapy and drug delivery. MoS₂ based nanomaterials can effectively prevent bacterial growth through many mechanisms. Through this review, we have tried to provide an inclusive knowledge on the recent progress of antibacterial studies in MoS₂ based nanomaterials including MoS₂ nanosheets, nanoflowers, quantum dot (QD), hybrid nanocomposites and polymer nanocomposites. Moreover, toxicity of MoS₂ based nanomaterials is described at the end of the review.

Graphene-Based Functional Hybrid Membranes for Antimicrobial Applications: A Review

Graphene-based nanomaterials have shown wide applications in antimicrobial fields due to their accelerated rate of pathogen resistance and good antimicrobial properties. To apply graphene materials in the antimicrobial test, the graphene materials are usually fabricated as two-dimensional (2D) membranes. In addition, to improve the antimicrobial efficiency, graphene membranes are modified with various functional nanomaterials, such as nanoparticles, biomolecules, polymers, etc. In this review, we present recent advances in the fabrication, functional tailoring, and antimicrobial applications of graphene-based membranes. To implement this goal, we first introduce the synthesis of graphene materials and then the fabrication of 2D graphene-based membranes with potential techniques such as chemical vapor deposition, vacuum filtration, spin-coating, casting, and layer-by-layer self-assembly. Then, we present the functional tailoring of graphene membranes by adding metal and metal oxide nanoparticles, polymers, biopolymers, metal–organic frameworks, etc., with graphene. Finally, we focus on the antimicrobial mechanisms of graphene membranes, and demonstrate typical studies on the use of graphene membranes for antibacterial, antiviral, and antifungal applications. It is expected that this work will help readers to understand the antimicrobial mechanism of various graphene-based membranes and, further, to inspire the design and fabrication of functional graphene membranes/films for biomedical applications.

Ultrahigh-efficiency antibacterial and adsorption performance induced by copper-substituted polyoxomolybdate-decorated graphene oxide nanocomposites

Given the rise of drug-resistant pathogens and industrial contaminants, the development of efficient and eco-friendly water treatment technologies and materials is highly desirable and urgent. Herein, a multifunctional graphene oxide/chitosan/copper-based polyoxometalate (GO/CS/Cu-POM) nanocomposite (Cu-POM, [Cu(L)₄][Cu(L)₃(H₂O)][Cu(L)(H₂O)][P₂Mo₅O₂₃]·4H₂O, L = pyrazole) was synthesized by the ultrasound-assisted self-assembly strategy. The GO/CS/Cu-POM nanocomposite exhibited potent bactericidal properties against gram-positive/negative bacterial strains Staphylococcus aureus (S. aureus, 99.98%), Escherichia coli (E. coli, 99.99%), and drug-resistant E. coli bacterial strains (kanamycin-resistant E. coli 99.93% and ampicillin-resistant E. coli, 97.94%). Further, the antibacterial performance was strongly dependent on synergistic effect between GO/CS and Cu-POM in GO/CS/Cu-POM. The destruction of bacterial membrane and high levels of oxidative stress induced by GO/CS/Cu-POM played a significant role in the bactericidal process. Furthermore, the GO/CS/Cu-POM nanocomposite also displayed superior performance for removal of methylene blue (MB, 96.86%), gentian violet (GV, 97.77%), basic fuchsin (BF, 96.47%), tetracycline (TC, 78.92%) and norfloxacin (NC, 76.26%). Moreover, the main process of dye removal by GO/CS/Cu-POM was controlled by chemisorption. More importantly, the GO/CS/Cu-POM nanocomposite indicated good biocompatibility to human umbilical vein endothelial cells. Current work provides an effective strategy to design multifunctional POM-based composites for water purification and environmental protection.

Development of Silver-Containing Hydroxyapatite-Coated Antimicrobial Implants for Orthopaedic and Spinal Surgery

The prevention of surgical site infections is directly related to the minimization of surgical invasiveness, and is in line with the concept of minimally invasive spine therapy (MIST). In recent years, the incidence of postoperative infections has been increasing due to the increased use of spinal implant surgery in patients at high risk of infection, including the elderly and easily infected hosts, the limitations of poor bone marrow transfer of antibiotics, and the potential for contamination of surgical gloves and instruments. Thus, the development of antimicrobial implants in orthopedic and spinal surgery is becoming more and more popular, and implants with proven antimicrobial, safety, and osteoconductive properties (i.e., silver, iodine, antibiotics) in vitro, in vivo, and in clinical trials have become available for clinical use. We have developed silver-containing hydroxyapatite (Ag-HA)-coated implants to prevent post-operative infection, and increase bone fusion capacity, and have successfully commercialized antibacterial implants for hip prostheses and spinal interbody cages. This narrative review overviews the present status of available surface coating technologies and materials; describes how the antimicrobial, safety, and biocompatibility (osteoconductivity) of Ag-HA-coated implants have been demonstrated for commercialization; and reviews the clinical use of antimicrobial implants in orthopedic and spinal surgery, including Ag-HA-coated implants that we have developed.

Graphene nanoplatelets/CeO2 nanotiles nanocomposites as effective antibacterial material for multiple drug-resistant bacteria

Antibacterial agents with low toxicity to normal cells, redox activity and free radical scavenging property are urgently needed to address the global health crisis. The phenomenal conducting nature of graphene is a best fit to enhance the antibacterial properties of metal oxides. In this work, CeO₂ nanotiles and graphene nanoplatelets/CeO₂ nanotiles nanocomposites (G/CeO₂) have been synthesized by a solvothermal method. The prepared materials have been characterized using XRD, FE-SEM, EDX, and UV–visible spectroscopy techniques to investigate their crystallinity, morphology, composition, and optical bandgap energies. The CeO₂ and G/CeO₂ nanocomposites have also been tested for antibacterial applications. The neat CeO₂ nanotiles sample inhibits the bacterial growth of Pseudomonas aeruginosa and Staphylococcus aureus up to 14.21% and 39.53% respectively. The antibacterial activity was tremendously enhanced using 25% graphene-loaded sample (G/CeO₂-II) i.e., approximately 83% loss of P. aeruginosa and 89% in case of S. aureus has been observed. This can be attributed to the unique nano-architecture, oxidative stress due to the excellent ability of reversible conversion between the two electronic states of CeO₂ and the stress exerted by the planar graphene and CeO₂ nanotiles. Therefore, the G/CeO₂ nanocomposites can find potential application as nano-antibiotics for controlling pathogens.

Surface-Decorated Graphene Oxide Sheets with Copper Nanoderivatives for Bone Regeneration: An In Vitro and In Vivo Study Regarding Molecular Mechanisms, Osteogenesis, and Anti-infection Potential

It has been previously reported that graphene oxide/copper nanoderivative (GO/Cu)-incorporated chitosan/hyaluronic acid scaffolds might be promising wound dressings for the management of infected wound healing. The aim of the present research is to deeply explore the potential antimicrobial mechanisms and synergistic osteogenic activity, as well as the in vivo anti-infective behavior of GO/Cu nanocomposites, making them possible candidates for establishing implantable biomaterials for the repair of infected bone defects. The antibacterial mechanisms of the nanocomposites were explored through the examination of membrane integrity, oxidative stress, and metabolic enzyme activities. Then, the cytocompatibility with bone mesenchymal stem cells (rBMSCs) and osteogenic potential were confirmed, and a subcutaneous bacterial infection model in rats was also established to verify the in vivo anti-infective property and biosafety of the nanocomposites. It was found that leakage of adenosine triphosphate, proteins, and reducing sugars from the bacterial cells, indicative of damaged permeability of bacterial membranes, and promoted production of reactive oxygen species and disordered metabolic enzyme activities in response to oxidative stress were possible molecular mechanisms responsible for the synergistic antibacterial effects of the GO/Cu nanocomposites. Additionally, good cytocompatibility with rBMSCs and promoted osteogenic differentiation were found in GO/Cu nanocomposites (mass ratio = 2:1), which also demonstrated satisfactory in vivo anti-infective performance, reduced inflammation, and acceptable biosafety. Based on our results, damaged bacterial membranes, increased ROS production, and disorders of crucial enzyme metabolism were the main antibacterial mechanisms involved in the bacterium-killing events caused by the GO/Cu nanocomposites, which also showed enhanced osteogenic activity, in vivo anti-infective capability, and acceptable cytocompatibility and biosafety. Therefore, GO/Cu (2:1) nanocomposites are a potential strategy for improving the biological performance of current bone substitutes used for combating bacterial-contaminated bone defects.

SnO2nanorods/graphene nanoplatelets nanocomposites: towards fast removal of malachite green and pathogen control

The world is facing alarming challenges of environmental pollution due to uncontrolled water contamination and multiple drug resistance of pathogens. However, these challenges can be addressed by using novel nanocomposites materials such as, SnO₂/graphene nanopaletelets (GNPs) nanocomposites remarkably. In this work, we have prepared SnO₂nanorods and SnO₂/GNPs nanocomposites (GS-I and GS-II) with size of 25 ± 6 nm in length and 4 ± 2 nm in diameter. The optical bandgap energies change from 3.14 eV to 2.80 eV in SnO₂and SnO₂/GNPs nanocomposite. We found that SnO₂/GNPs nanocomposite (GS-II) completely removes (99.11%) malachite green in 12 min, under UV light exposure, while under same conditions, SnO₂nanorods removes only 37% dye. Moreover, visible light exposure resulted in 99.01% removal of malachite green in 15 min by GSII as compared to 24.7% removal by SnO₂. In addition, GS-II nanocomposite inhibits 79.57% and 78.51% growth ofP. aeruginosaandS. aureusrespectively. A synchronized contribution of SnO₂and GNPs makes SnO₂/GNPs nanocomposites (GS-II) an innovative multifunctional material for simultaneous fast and complete removal of malachite green and inhibition of drug resistant pathogens.

Antibacterial activity of ZnO quantum dots and its protective effects of chicks infected withSalmonella pullorum

In light of emerging antibiotic resistance, synthesis of active, environmental friendly antimicrobial alternatives becomes increasingly necessary. In this study, ZnO quantum dots (ZnO QDs) were developed by the sol-gel method and characterized. The antibacterial activities of ZnO QDs againstEscherichia coli(E. coli),Staphylococcus aureus(S. aureus) andSalmonella Pullorum(S. Pullorum) were systematically investigated. Moreover, the protective effects of ZnO QDs on Salmonella-caused pullorosis in chicks were also explored. The results indicated that the size range of ZnO QDs was 3-6 nm. Antibacterial results showed that ZnO QDs treatment inhibited the growth ofE. coli,S. aureus, andS. Pullorumin the rate of 87.06 ± 0.98%, 94.75 ± 2.28%, and 85.55 ± 1.15%, respectively. Its excellent antibacterial property was manifested with the minimum inhibitory concentration of 0.7812, 0.0976, and 0.1953 mg ml^-1, which may be attributed to the production of reactive oxygen species, the dissolution of Zn²⁺ions, and the loss of cell integrity. Furthermore, in thein vivotest, the ZnO QDs effectively reduced the mortality of chicks infected withS. Pullorumvia regulating the balance of the intestinal flora, protecting liver and intestine, and modulating the balance of antioxidation systems. This study reveals that ZnO QDs exerts remarkably antibacterial activityin vitroand anti-pullorosis effect in chicks.

Photodynamic Activity of Graphene Oxide/Polyaniline/Manganese Oxide Ternary Composites toward Both Gram-Positive and Gram-Negative Bacteria

Graphene derivatives have been attracting extensive interest as effective antimicrobial agents. In the present study, ternary nanocomposites are prepared based on graphene oxide quantum dots (GOQD), polyaniline (PANI), and manganese oxides. Because of the hydrophilic GOQD and PANI, the resulting GPM nanocomposites are readily dispersible in water and upon photoirradiation at 365 nm exhibit antimicrobial activity toward both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus epidermidis (S. epidermidis). Notably, the nanocomposite with a high Mn2+ and Mn4+ content is found to be far more active than that with a predominant Mn3+ component, although both samples feature a similar elemental composition and average Mn valence state. The bactericidal activity is largely ascribed to the photocatalytic production of hydroxy radicals and photogenerated holes; both are known to exert oxidative stress on bacterial cells. Further antimicrobial contributions may arise from the strong affinity of the nanocomposites to the cell surfaces. These results suggest that the metal valence state may be a critical parameter in the design and engineering of high-performance antimicrobial agents based on metal oxide nanocomposites.

A review of recent and emerging antimicrobial nanomaterials in wastewater treatment applications

In this paper, we present a critical review on antimicrobial nanomaterials with demonstrated potential for application as a disinfection technology in wastewater treatment. Studies involving fabrication and testing of antimicrobial nanomaterials for wastewater treatment were gathered, critically reviewed, and analyzed. Our review shows that there are only a few eligible candidate nanoparticles (NPs) (metal and metal oxide) that can adequately serve as an antimicrobial agent. Nanosilver (nAg) was the most studied and moderately understood metal NPs with proven antimicrobial activity followed by ZnO (among antimicrobial metal oxide NPs) which outperformed titania (in the absence of light) in efficacy due to its better solubility in aqueous condition. The direction of future work was found to be in the development of antimicrobial nanocomposites, since they provide more stability for antimicrobial metal and metal oxides NPs in water, thereby increasing their activity. This review will serve as an updated survey, yet touching also the fundamentals of the antimicrobial activity, with vital information for researchers planning to embark on the development of superior antimicrobial nanomaterials for wastewater treatment applications.

Antibiofouling Activity of Graphene Materials and Graphene-Based Antimicrobial Coatings

Microbial adhesion and biofilm formation is a common, nondesirable phenomenon at any living or nonliving material surface in contact with microbial species. Despite the enormous efforts made so far, the protection of material surfaces against microbial adhesion and biofilm formation remains a significant challenge. Deposition of antimicrobial coatings is one approach to mitigate the problem. Examples of such are those based on heparin, cationic polymers, antimicrobial peptides, drug-delivering systems, and other coatings, each one with its advantages and shortcomings. The increasing microbial resistance to the conventional antimicrobial treatments leads to an increasing necessity for new antimicrobial agents, among which is a variety of carbon nanomaterials. The current review paper presents the last 5 years' progress in the development of graphene antimicrobial materials and graphene-based antimicrobial coatings that are among the most studied. Brief information about the significance of the biofouling, as well as the general mode of development and composition of microbial biofilms, are included. Preparation, antibacterial activity, and bactericidal mechanisms of new graphene materials, deposition techniques, characterization, and parameters influencing the biological activity of graphene-based coatings are focused upon. It is expected that this review will raise some ideas for perfecting the composition, structure, antimicrobial activity, and deposition techniques of graphene materials and coatings in order to provide better antimicrobial protection of medical devices.

Physically crosslinked PVA/graphene-based materials/aloe vera hydrogel with antibacterial activity

Burn is a major skin injury that occurs worldwide. For second-degree burns, special treatment should be given for creating a suitable wound healing environment. Hydrogel wound dressing as the primary care should possess extra properties that include antibacterial activity and cytocompatibility to enhance the treatment effectiveness. Additional therapy such as electrical stimulation can be applied as well promote wound healing. Herein, we used the tissue engineering concept to create a novel antibacterial and cytocompatible hydrogel made of polyvinyl alcohol (PVA), graphene-based material (GBM), and aloe vera extract (Av) through the freeze-thaw process. We prepared the PVA/GBM/Av hydrogel and examined its potential as a wound dressing. We found that it exhibited excellent hydrophilicity with a contact angle between 15 and 31 degrees and electrical conductivity within the range of 0.0102-0.0154 S m-1, which is comparable to that of the human skin tissue and possesses tensile strength up to 1.5 MPa with elongation of 405%. It also demonstrated good stability in phosphate buffer saline with a weight ratio of 73-80% after 14 days of immersion. We presented that the addition of graphene and graphene oxide (GO) inhibited the growth of Gram-positive Staphylococcus aureus ATCC 6538 with the lowest bacterial population observed in PVA/GO, which is 1.74 × 107 cfu mL-1 after 1 day incubation and 99.94% bacterial reduction. Furthermore, our PVA/GBM/Av showed no toxicity to 3T3 fibroblast cells after 48 h with viability up to 295% for PVA/GO/Av. In summary, our fabricated hydrogels have shown their potential as wound dressing with antibacterial and non-cytotoxic properties.

Application of Electrospinning in Antibacterial Field

In recent years, electrospun nanofibers have attracted extensive attention due to their large specific surface area, high porosity, and controllable shape. Among the many applications of electrospinning, electrospun nanofibers used in fields such as tissue engineering, food packaging, and air purification often require some antibacterial properties. This paper expounds the development potential of electrospinning in the antibacterial field from four aspects: fiber morphology, antibacterial materials, antibacterial mechanism, and application fields. The effects of fiber morphology and antibacterial materials on the antibacterial activity and characteristics are first presented, then followed by a discussion of the antibacterial mechanisms and influencing factors of these materials. Typical application examples of antibacterial nanofibers are presented, which show the good prospects of electrospinning in the antibacterial field.

Graphene coupled TiO2 photocatalysts for environmental applications: A review

Nanostructured photocatalysts have always offered opportunities to solve issues concerned with the environmental challenges caused by rapid urbanization and industrialization. These materials, due to their tunable physicochemical characteristics, are capable of providing a clean and sustainable ecosystem to humanity. One of the current thriving research focuses of visible-light-driven photocatalysts is on the nanocomposites of titanium dioxide (TiO₂) with carbon nanostructures, especially graphene. Coupling TiO₂ with graphene has proven more active by photocatalysis than TiO₂ alone. It is generally considered that graphene sheets act as an electron acceptor facilitating the transfer and separation of photogenerated electrons during TiO₂ excitation, thereby reducing electron-hole recombination. This study briefly reviews the fundamental mechanism and interfacial charge-transfer dynamics in TiO₂/graphene nanocomposites. Design strategies of various graphene-based hybrids are highlighted along with some specialized synthetic routes adopted to attain preferred properties. Importantly, the enhancing interfacial charge transfer of photogenerated e¯_CB through the graphene layers by morphology orientation of TiO₂, predominated exposure of their high energy crystal facets, defect engineering, enhancing catalytic sites in graphene, constructing dedicated architectures, tuning the nanomaterial dimensionality at the interface, and employing the synergism adopted through various modifications, are systematically compiled. Portraying the significance of these photocatalytic hybrids in environmental remediation, important applications including air and water purification, self-cleaning surfaces, H₂ production, and CO₂ reduction to desired fuels, are addressed.

Graphene: An Antibacterial Agent or a Promoter of Bacterial Proliferation?

Graphene materials (GMs) are being investigated for multiple microbiological applications because of their unique physicochemical characteristics including high electrical conductivity, large specific surface area, and robust mechanical strength. In the last decade, studies on the interaction of GMs with bacterial cells appear conflicting. On one side, GMs have been developed to promote the proliferation of electroactive bacteria on the surface of electrodes in bioelectrochemical systems or to accelerate interspecies electron transfer during anaerobic digestion. On the other side, GMs with antibacterial properties have been synthesized to prevent biofilm formation on membranes for water treatment, on medical equipment, and on tissue engineering scaffolds. In this review, we discuss the mechanisms and factors determining the positive or negative impact of GMs on bacteria. Furthermore, we examine the bacterial growth-promoting and antibacterial applications of GMs and debate their practicability.

Bioengineered chitosan-magnesium nanocomposite: A novel agricultural antimicrobial agent against Acidovorax oryzae and Rhizoctonia solani for sustainable rice production

Chitosan is a potent biopolymer having promising antimicrobial properties against phytopathogens. Recently, engineered nanomaterials (ENMs) have gained much attention due to their potential application in the plant disease management. In this study, we reported the green synthesis of chitosan-magnesium (CS-Mg) nanocomposite and its antimicrobial activity against two rice pathogens namely Acidovorax oryzae and Rhizoctonia solani for the first time. The green MgO nanoparticles synthesized by using a native Bacillus sp. strain RNT3, were used to fabricate CS-Mg nanocomposite utilizing one-pot synthesis method. The synthesis of CS-Mg nanocomposite was further confirmed by using UV-vis spectroscopy, whereas, FTIR and XRD analysis showed the capping of CS-Mg nanocomposites by different functional groups together with their crystalline structure, respectively. Besides, SEM and TEM images revealed the spherical shape along with the particles size ranging from 29 to 60 nm. Moreover, EDS analysis confirmed the elemental purity of nanocomposite. The CS-Mg nanocomposite showed remarkable antimicrobial activity against A. oryzae and R. solani and significantly inhibited the growth as compared to non-treated control. The ultrastructure studies showed damaged structure of cell wall and internal cellular organelles after treatment with 100 μg mL^-1 CS-Mg nanocomposite. The results of this study indicated that CS-Mg nanocomposite-based antimicrobial agents could be considered as promising nanopesticides against phytopathogens in plant disease management.

Graphene Oxide/Copper Nanoderivatives-Modified Chitosan/Hyaluronic Acid Dressings for Facilitating Wound Healing in Infected Full-Thickness Skin Defects

PURPOSE

Wound healing, especially of infected wounds, remains a clinical challenge in plastic surgery. This study aimed to manufacture a novel and multifunctional wound dressing by combining graphene oxide/copper nanocomposites (GO/Cu) with chitosan/hyaluronic acid, providing significant opportunities for the therapy of wound repair in wounds with a high risk of bacterial infection.

METHODS

In this study, GO/Cu-decorated chitosan/hyaluronic acid dressings (C/H/GO/Cu) were prepared using sodium trimetaphosphate (STMP) crosslinking and the vacuum freeze-drying method, and chitosan/hyaluronic acid dressings (C/H) and GO-incorporated chitosan/hyaluronic acid dressings (C/H/GO) served as controls. The surface characterization, in vitro degradation under various pH values, antimicrobial potential, cytocompatibility and in vivo therapeutic efficacy in a bacteria-infected full-thickness skin defect model were systematically evaluated.

RESULTS

Our experimental results indicated that the acidic environment facilitated the release of copper (CuNPs and Cu2+) from the dressings, and prepared C/H/GO/Cu dressings exhibited significant in vitro antimicrobial activities against the two tested bacterial strains (ATCC35984 and ATCC25923). All three dressings showed satisfactory cytocompatibility with mouse fibroblasts (NIH/3T3-L1). Moreover, remarkably accelerated wound healing was found in the C/H/GO/Cu group, with controlled inflammatory infiltration and improved angiogenesis in granulation tissues. In addition, no pathological damage was noted in the tissue structures of the tested organs (heart, lung, liver and kidney) in any of the four groups.

CONCLUSION

Collectively, GO/Cu-incorporated chitosan/hyaluronic acid dressings suggested a synergistic antimicrobial efficacy and acceptable biocompatibility both in vitro and in vivo, as well as a significantly accelerated healing process of bacteria-infected wounds. Thus, the multifunctional C/H/GO/Cu composite is expected to be a potential alternative for wound dressings, especially for the management of intractable wounds caused by bacterial infection.

Antibacterial Activity of Nitrogen-Doped Carbon Dots Enhanced by Atomic Dispersion of Copper

Antibiotic resistance is an imminent threat to human health, requiring the development of effective alternate antibacterial agents. One such alternative includes nanoparticle (photo)catalysts that are good at producing reactive oxygen species (ROS). Herein, we report the design and preparation of nitrogen-doped carbon dots functionalized with atomically dispersed copper centers by Cu-N coordination (Cu/NCD) that exhibit apparent antibacterial activity toward Gram-negative Escherichia coli (E. coli) under photoirradiation. The growth of E. coli cells is found to be markedly inhibited by Cu/NCD under 365 nm photoirradiation, whereas no apparent inhibition is observed in the dark or with the copper-free carbon dots alone. This is ascribed to the prolonged photoluminescence lifetime of Cu/NCD that facilitates the separation of photogenerated electron-hole pairs and ROS formation. The addition of tert-butyl alcohol is found to completely diminish the antimicrobial activity, suggesting that hydroxyl radicals are responsible for microbial death. Consistent results are obtained from fluorescence microscopic studies using CellROX green as the probe. Similar bactericidal behaviors are observed with Gram-positive Staphylococcus epidermidis (S. epidermidis). The copper content within the carbon material is optimized at a low loading of 1.09 wt %, reducing the possibility of toxic copper-ion leaching. Results from this study highlight the significance of carbon-based nanocomposites with isolated metal species as potent antimicrobial reagents.

Recent advancement in biomedical applications on the surface of two-dimensional materials: from biosensing to tissue engineering

As biosensors and biomedical devices have become increasingly important to everyday diagnostics and monitoring, there are tremendous, and constant efforts towards developing and improving the reliability and versatility of such technology. As they offer high surface area-to-volume ratios and a diverse range of properties, from electronic to optical, two dimensional (2D) materials have proven to be very promising candidates for biological applications and technologies. Due to the dimensionality, 2D materials facilitate many interfacial phenomena that have shown to significantly improve the performance of biosensors, while recent advances in synthesis techniques and surface engineering methods also enable the realization of future biomedical devices. This short review aims to highlight the influence of 2D material surfaces and the properties that arise due to their 2D structure. Using recent (within the last few years) examples of biosensors and biomedical applications, we emphasize the important role of 2D materials in advancing developments and research for biosensing and healthcare.

Graphene Oxide Quantum Dot-Based Functional Nanomaterials for Effective Antimicrobial Applications

Conventional β-lactam antibiotics are resisted by bacteria at an increasing rate, prompting studies into the development of alternate antibiotic agents. In this personal account, we summarize recent progress in the design and engineering of graphene oxide quantum dot-based nanomaterials as potent antimicrobial agents. Specifically, we examine the impacts of chemical reduction on the antimicrobial activity of graphene oxide quantum dots, and enhancement of the bactericidal performance by the formation of nanocomposites with metal oxide nanoparticles, within the context of photodynamic generation of reactive oxygen species. A perspective is also included where the promises and challenges are highlighted in the development of high-performance antimicrobial agents based on graphene derivatives.

Functional-modified polyurethanes for rendering surfaces antimicrobial: An overview

Antimicrobial surfaces and coatings are rapidly emerging as primary components in functional modification of materials and play an important role in addressing the problems associated with biofouling and microbial infection. Polyurethane (PU) consisting of alternating soft and hard segments has been one of the most important coating materials that have been widely applied in many fields due to its versatile properties. This review attempts to provide insight into the recent advances in antimicrobial polyurethane coatings or surfaces. According to different classes of antimicrobial components along with their antimicrobial mechanism, the synthesis pathways are presented systematically herein to afford polyurethane with antimicrobial properties. Also, the challenges and opportunities of antimicrobial PU coatings and surfaces are also discussed. This review will be beneficial to the exploitation and the further studies of antimicrobial polyurethane materials for a variety of applications.