Silver amplified immunosensor via effective fluorogenic Ag+-imidazole aggregation for detection of AFB1

BACKGROUND

Cereals are susceptible to aflatoxin contamination during storage and transportation, which is highly carcinogenic and teratogenic, and seriously threaten human health. The accurate and rapid detection of total aflatoxin (including aflatoxin B1, B2, G1, and G2) is of great importance for food safety. Conventional fluorescence immunoassays have the advantage of being sensitive and fast; however, these methods can be affected by strong background and matrix interference. Therefore, the development of ultrasensitive, cost-effective, and interference rejection sensors for detecting aflatoxins in moldy grains is vital for food safety and human health.

RESULTS

In this paper, a broad-spectrum aflatoxin monoclonal antibody was prepared by using hybridoma cell fusion technology. An aggregation-induced emission (AIE) based immunosensor via silver amplification coupled with a fluorogenic Ag+ probe was established for AFB1 analysis. Silver nanoparticles are decomposed into numerous Ag+ by H2O2, and then Ag+ further specifically binds with imidazole-modified AIE molecules, improving the sensitivity and anti-interference ability of the method. The IC50 and IC15 of AIE-based immunosensor for AFB1 were 0.019 and 0.0014 μg/L, respectively, 2.3-fold and 5.8-fold higher than those of icELISA. The AIE-based immunosensor was also used to analyze AFB1 from actual cereal samples, with spiked recoveries ranging from 72.91 to 115.92 %. In addition, the method was used to detect total aflatoxins in moldy grains.

SIGNIFICANCE

Based on the advantages of broad-spectrum aflatoxin monoclonal antibody, high-efficiency metal signal amplification, and functional AIE molecule, a sensitive, accurate, cost-effective, and time-saving method was developed for the analysis of total aflatoxins in cereals. Moreover, the proposed signal amplification strategy shows great potential for analyzing other trace-level small molecular pollutants.

Colorimetric Immunoassays with Boronic Acid-Decorated, Peroxidase-like Metal-Organic Frameworks as the Carriers of Antibodies and Enzymes

The sensitivity of immunoassays is generally limited by the low signal reporter/recognition element ratio. Nanomaterials serving as the carriers can enhance the loading number of signal reporters, thus improving the detection sensitivity. However, the general immobilization strategies, including direct physical adsorption and covalent coupling, may cause the random orientation and conformational change in proteins, partially or completely suppressing the enzymatic activity and the molecular recognition ability. In this work, we proposed a strategy to load recognition elements of antibodies and enzyme labels using boronic acid-modified metal-organic frameworks (MOFs) as the nanocarriers for signal amplification. The conjugation strategy was proposed based on the boronate ester interactions between the carbohydrate moieties in antibodies and enzymes and the boronic acid moieties on MOFs. Both enzymes and MOFs could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H2O2, therefore achieving dual signal amplification. To indicate the feasibility and sensitivity of the strategy, colorimetric immunoassays of prostate specific antigen (PSA) were performed with boronic acid-modified Cu-MOFs as peroxidase mimics to catalyze TMB oxidation and nanocarriers to load antibody and enzyme (horseradish peroxidase, HRP). According to the change in the absorbance intensity of the oxidized TMB (oxTMB), PSA at the concentration range of 1~250 pg/mL could be readily determined. In addition, this work presented a site-specific and oriented conjugation strategy for the modification of nanolabels with recognition elements and signal reporters, which should be valuable for the design of novel biosensors with high sensitivity and selectivity.

Recent advances in enzyme-enhanced immunosensors

Among the products for rapid detection in different fields, enzyme-based immunosensors have received considerable attention. Recently, great efforts have been devoted to enhancing the output signals of enzymes through different strategies that can significantly improve the sensitivity of enzyme-based immunosensors for the need of practical applications. In this manuscript, the significance of enzyme-based signal transduction patterns in immunoassay and the central role of enzymes in achieving precise control of reaction systems are systematically described. In view of the rapid development of this field, we classify these strategies based on the combination of immune recognition and enzyme amplification into three categories, namely enzyme-based enhancement strategies, combination of the catalytic amplification of enzymes with other signal amplification methods, and substrate-based enhancement strategies. The current focus and future direction of enzyme-based immunoassays are also discussed. This article is not exhaustive, but focuses on the latest advances in different signal generation methods based on enzyme-initiated catalytic reactions and their applications in the detection field, which could provide an accessible introduction of enzyme-based immunosensors for the community with a view to further improving its application efficiency.

Immobilizing Enzymes on Noble Metal Hydrogel Nanozymes with Synergistically Enhanced Peroxidase Activity for Ultrasensitive Immunoassays by Cascade Signal Amplification

Enzyme immobilization plays an essential role in solving the problems of the inherently fragile nature of enzymes. Although prominent stability and reuse of enzymes can be achieved by enzyme immobilization, their bioactivity and catalytic efficiency will be adversely affected. Herein, PdCu hydrogel nanozymes with a hierarchically porous structure were used to immobilize horseradish peroxidase (HRP) to obtain PdCu@HRP. In addition to the improvement of stability and reusability, PdCu@HRP displayed synergistically enhanced activities than native HRP and PdCu hydrogels. Not only the specific interactions between PdCu hydrogel nanozymes and enzymes but also the enrichment of substrates around enzymes by electrostatic adsorption of hydrogels was proposed to expound the enhanced catalytic activity. Accordingly, by taking advantage of the excellent catalytic performance of the PdCu@HRP and the glucose oxidase encapsulated in zeolitic imidazolate framework-8, colorimetric biosensing of the carcinoembryonic antigen via catalytic cascade reactions for achieving signal amplification was performed. The obtained biosensor enhanced the detection sensitivity by approximately 6.1-fold as compared to the conventional HRP-based enzyme-linked immunosorbent assay, demonstrating the promising potential in clinical diagnosis.

Cascade amplified colorimetric immunoassay based on an integrated multifunctional composite with catalytic coordination polymers for prostate specific antigen detection

Coordination polymers (CPs) have been extensively investigated for a variety of applications because of their tunable structures and properties. In this work, we demonstrated the potential of catalytic CPs in the fabrication of an integrated multifunctional composite for establishing a cascade amplified immunoassay. For this purpose, an Fe(iii)-based CP (FeCP) with peroxidase-like activity was employed as a model of catalytic CPs to simultaneously integrate glucose oxidase (GOx) and the anti-prostate specific antigen (anti-PSA) antibody through a self-adaptive inclusion process. This leads to the formation of a dual-functional anti-PSA/GOx@FeCP composite with cascade catalytic activity and capture ability to target the antigen. Benefiting from the shielding effect of FeCPs as a host, a significantly improved stability against harsh environments can be achieved for the loaded GOx and anti-PSA antibody in the composite. On this basis, by utilizing anti-PSA/GOx@FeCPs as a detection antibody, a colorimetric immunoassay based on the cascade catalysis of GOx and FeCPs as a signal amplified enhancer was developed for the detection of PSA. Under optimal conditions, satisfactory detection results have been achieved in both buffered aqueous solutions and serum samples. We believe that this study will open up a new avenue for the rational design and fabrication of multifunctional composites while offering a new cascade amplification strategy for PSA detection.

Nanocrystals of platinum-group metals as peroxidase mimics for in vitro diagnostics

Peroxidase mimics of nanoscale materials as alternatives to natural peroxidases have found widespread uses in biomedicine. Among various types of peroxidase mimics, platinum-group metal (PGM) nanocrystals have drawn considerable attention in recent years due to their superior properties. Particularly, PGM nanocrystals display high catalytic efficiencies, allow for facile surface modifications, and possess excellent stabilities. This feature article summarizes our recent work on development of PGM nanocrystals as peroxidase mimics and exploration of their applications in in vitro diagnostics. We begin with a brief introduction to controlled synthesis of PGM nanocrystals in solution phase. We then elaborate on a variety of physicochemical parameters that can be carefully tuned to optimize the peroxidase-like properties of PGM nanocrystals. Then, we highlight the applications of PGM nanocrystals in different in vitro diagnostic platforms. We conclude this article with personal perspectives on future research directions in this emerging field, where challenges and opportunities are remarked.

Nonenzyme Cascaded Amplification Biosensor Based on Effective Aggregation Luminescence Caused by Disintegration of Silver Nanoparticles

Sensitive and portable quantification of biomarkers has particular significance in the monitoring and treatment of clinical diseases. Conventional immunoassays were accustomed to introducing or incorporating enzymes for signal amplification, which commonly suffered from poor stability and inferior tolerance. Herein, we constructed a novel nonenzyme amplification methodology based on fluorogenic Ag⁺-tetrazolate aggregation coupled with silver corrosion sensitization for biomarker determination. A significant cascade enhancement strategy was achieved by the valid aggregation luminescence caused by the potent disintegration of silver nanoparticles. Furthermore, efficient magnetic separation was also combined and performed for the rapidity and simplicity of operation. As the target, the detection limit of prostate-specific antigen was 15.66 pg/mL in our designed biosensor. Besides, a good linear relationship was obtained. The designed biosensor demonstrated good specificity and was successfully applied to clinical serum sample detection.

Label-assisted chemical adsorption triggered conversion of electroactivity of sensing interface to achieve the Ag/AgCl process for ultrasensitive detection of CA 19-9

Efficient strategies in enhancing sensitivity are pivotal to ultrasensitive detection of tumor markers. In this work, based on the strategy of label-assisted chemical adsorption triggered conversion of electroactivity of sensing interface, a Ag/AgCl process was achieved to enhance sensitivity of the constructed sandwich-type amperometric immunosensor for ultrasensitive detection of carbohydrate antigen 19-9 (CA19-9). Briefly, polydopamine-Ag nanoparticles (PDA-Ag NPs), as signal precursor, combined with labeling antibody were served as labels and graphene oxide-melamine (GO-MA) substrate with chemical absorption capacity was applied as smart sensing interface. After successfully incubating labels, there was primitively no current response due to the poor conductivity between labels and electrode. However, in the presence of H₂O₂, Ag NPs from labels can be etched into Ag ions, which were adsorbed by GO-MA to form GO-MA-Ag as electroactive substrate. Then, the substrate exhibited a sharp and stable electrochemistry peak of solid-state Ag/AgCl process in the buffer containing KCl. The sensitivity toward detection of CA19-9 was notably enhanced based on the appearance of sharp peak. Under optimum conditions, the designed immunosensor demonstrated a wide working range from 0.0001 to 100 U mL^-1 and an ultralow detection limit 0.032 mU mL^-1. Thus, utilizing this strategy to construct immunosensor was highly promising in clinical diagnosis for ultrasensitive detection of tumor makers.

Nanomaterials-Based Colorimetric Immunoassays

Colorimetric immunoassays for tumor marker detection have attracted considerable attention due to their simplicity and high efficiency. With the achievements of nanotechnology and nanoscience, nanomaterials-based colorimetric immunoassays have been demonstrated to be promising alternatives to conventional colorimetric enzyme-linked immunoassays. This review is focused on the progress in colorimetric immunoassays with the signal amplification of nanomaterials, including nanomaterials-based artificial enzymes to catalyze the chromogenic reactions, analyte-induced aggregation or size/morphology change of nanomaterials, nanomaterials as the carriers for loading enzyme labels, and chromogenic reactions induced by the constituent elements released from nanomaterials.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

An innovative "unlocked mechanism" by a double key avenue for one-pot detection of microRNA-21 and microRNA-141

The accurate and quantitative detection of microRNAs (miRNAs) as next-generation, reliable biomarkers will provide vital information for cancer research and treatment. However, their unique, intrinsic features pose quite a challenge for miRNA profiling, especially for multiplexed detection. Thus, there is a strong and an ever-growing need to develop an accurate, simple, sensitive and specific miRNA sensing method. Methods: In this study, a simple and novel sensor is presented that uses a flow cytometry (FCM) method based on the double key "unlocked mechanism" and a fluorescence enrichment signal amplification strategy. The "unlocked mechanism" was cleverly designed via using hairpin DNA probes (HDs) labeled by fluorescent particles (FS) as the lock to block part of them, which can specifically hybridize with the probe on polystyrene microparticles (PS). The target miRNA and duplex-specific nuclease (DSN) forming the double key can specifically open the HDs and cleave a single-stranded DNA (ssDNA) into DNA/RNA dimers circularly in order to unlock the special part of the HDs to be specially enriched further on the PS. Results: The designed sensor with a hairpin structure and DSN special performance was found to have a high specificity. The circularly unlocking fluorescent probes and fluorescent signal enrichment can be beneficial for achieving a high sensitivity with a detection limit of 3.39 fM for miRNA-21. Meanwhile, the performance of multiplexing was estimated by simultaneous detection of miR-21 and miR-141, and the method also allowed for miR-21 detection in breast cancer blood samples. Conclusion: The designed sensor based on an "unlocked mechanism" and a signal enrichment strategy resulted in a one-pot, highly specific and sensitive detection of multiplex miRNAs. The whole detection without the need for a complex purification process is based on a FCM and is expected to have a great value in cancer diagnosis and biomedical research.

An acid-responsive all-in-one signal amplification strategy for the ultrasensitive prostate-specific antigen detection

A one-pot strategy for the preparation of all-in-one signal tags for the colorimetric immunoassay of prostate-specific antigen.

Dual-mode fluorescent and colorimetric immunoassay for the ultrasensitive detection of alpha-fetoprotein in serum samples

We present a novel dual-mode fluorescent and colorimetric immunosensor based on conventional immunoassay platforms by utilizing a gold nanoflower (AuNF)-loaded fluorescein molecule (AuNF@Fluorescein) as signal output. The AuNFs were modified with thiolated carboxyl ligand, which consisted of a hydrophobic alkane chain as hydrophobic wallet for fluorescein encapsulation, a tetra (ethylene glycol) unit for biocompatibility and solubility, and a functional carboxyl group for the conjugation of biorecognition molecules for biosensing. The resultant AuNFs showed a high loading capacity of 3.74 × 10⁶ fluorescein molecules per AuNF because of its flower-like shape with many complex branches. By adjusting the solution pH to 8.0, the fluorescein molecules can almost entirely be released from the hydrophobic wallet of AuNF@Fluorescein, which led to strong fluorescent-signal amplification. Under the optimal detection conditions, the proposed immunoassay based on fluorescent signal exhibited ultrahigh sensitivity for alpha-fetoprotein (AFP) detection, with a limit of detection (LOD) of 29 fg/mL. This value is approximately 9.3 × 10³-fold lower than that of corresponding horseradish peroxidase (HRP)-based immunoassay (LOD = 270 pg/mL). The fluorescein molecule also had intrinsic peroxidase-like activity to catalyze 3,3',5,5'-tetramethylbenzidine oxidation with hydrogen peroxide for colorimetric signal. The proposed method with colorimetric mode further exhibited a sensitivity with a LOD of 17.7 pg/mL, which is about 15-fold lower than that of conventional HRP-based immunoassay. The recoveries of the proposed dual-mode immunoassay for AFP spiked serum samples ranged within 89.85%-100.0%, with the coefficient of variations ranging from 0.5% to 2.4%, indicating acceptable accuracy and precision for AFP quantitative detection. The reliability of the developed dual-mode immunoassay was further compared with a commercial chemiluminescence immunoassay kit by analyzing 20 clinical serum samples, showing that the two methods well agreed with each other, with high correlation coefficients of 0.997 and 0.986 based on recorded fluorescence and colorimetric signals, respectively. In summary, the proposed method was highly suitable for the ultrasensitive analysis of biomarkers or infectious diseases by fluorescence mode and can be used for routine clinical diagnosis by colorimetric mode.

Polyacrylamide Gel-Contained Zinc Finger Peptide as the "Lock" and Zinc Ions as the "Key" for Construction of Ultrasensitive Prostate-Specific Antigen SERS Immunosensor

In this work, we adopted polyacrylamide gel-contained zinc finger peptide (PZF) as a "lock" of Raman signal and zinc ions (Zn²⁺) as a sensitive "key", which was converted from target-captured ZnO NPs, to achieve the measurement of prostate-specific antigen (PSA). Owing to the lock effect from PZF, the surface-enhanced Raman scattering (SERS) tag toluidine blue (TB) connected on Ag NP-coating silica wafer was sheltered leading to low Raman response. Meanwhile, target PSA can specifically connect with antibody 2-coupled ZnO nanocomplexes (ZnO@Au@Ab₂) and antibody 1-coupled magnetic (CoFe₂O₄@Au@Ab₁) nanocomposite through sandwich immunoassay. In the presence of HCl, the ZnO NPs would convert into Zn²⁺ to open the PZF because Zn²⁺ can specifically react with zinc finger peptide to destroy the PZF structure forming abundant pores. In this way, Zn²⁺ could act as the key of Raman signal to open the PZF structure obtaining a strong Raman signal of TB. The proposed SERS sensor can have a quantitative detection of PSA within the range of 1 pg mL^-1 to 10 ng mL^-1 with a detection limit of 0.65 pg mL^-1. The interaction between zinc finger peptide and Zn²⁺ was firstly applied in SERS sensor for the sensitive detection of PSA. These results demonstrated that the new designed SERS biosensor could be a promising tool in biomarker diagnosis.