New approach for adsorptive removal of the antibiotic ciprofloxacin: carboxymethyl-dextran-functionalised magnetic iron oxide nanomaterials

Antibiotic residues in environmental media pose a significant health, social and economic problem and require effective removal strategies. This study presents a novel approach for the removal of the antibiotic ciprofloxacin from water sources using magnetic iron oxide nanoparticles (MNPs) synthesised by co-precipitation, and subsequently functionalised with the polysaccharide carboxymethyl-dextran (CMD). The prepared nanoadsorbent was characterised extensively by various physicochemical analyses, to evaluate its morphology, crystal structure, surface chemistry, electrokinetic properties, thermogravimetric properties and magnetic features. These analyses confirmed the successful functionalisation of the MNPs with CMD highlighting its potential for effective adsorption applications. The stability of CMD coating on MNPs was evaluated in terms of total carbon content, an important, yet often overlooked factor. The adsorption performance of MNPs@CMD for ciprofloxacin was investigated systematically by studying the effects of adsorbent dosage, pH, initial ciprofloxacin concentration, ionic strength, adsorption time and kinetics, temperature, and reusability. Under optimal conditions, nanoadsorbent exhibited a satisfactory maximum adsorption capacity of 14.71 mg/g, and maintained a removal efficiency of 79 % after four cycles, with minimal desorption of CMD layer on the MNPs. These findings demonstrate the potential of this magnetic polysaccharide nanoadsorbent for effective removal of ciprofloxacin from aqueous environments, enabling magnetic recovery and reuse.

Effect of feed supplementation with humic substances on phenotypic resistance profiles of Escherichia coli isolates from the ceca of broiler chickens

Humic substances (HS), natural complex-forming feed additives, are believed to reduce the bioavailability of antimicrobials to the gut microbiome, thereby limiting the emergence and spread of antimicrobial resistance in the food chain. However, this hypothesis has not yet been adequately verified experimentally. Our study was focused on the isolation of Escherichia coli (E. coli) from the ceca of 80 broiler chickens bred for 37 d under controlled conditions. Chickens in the control and experimental groups (40 broilers each) were fed standard commercial feeds, but the diet for experimental chicken was permanently supplemented with HS (99.3% feed + 0.7% HS). After slaughter and evisceration at the end of fattening period, the cecal contents of all chickens were subjected to microbiological analysis aimed at the enumeration, isolation and genotypic identification of E. coli strains by the species-specific PCR method. In total, 58 E. coli strains from control chickens and 60 strains from HS-fed chickens were tested for resistance against 19 antimicrobials using the broth microdilution method based on minimum inhibitory concentration breakpoints. Resistance to at least one antimicrobial was detected in almost 90% of E. coli isolates from control chickens, but in only 68.33% of isolates from HS-fed broilers (P < 0.01). In the experimental group, a noticeable decrease in resistance rates for ampicillin (31.78%), trimethoprim (22.88%), sulfamethoxazol (20.86%), and tetracycline (19.71%) was observed. The effect for fluorochinolones was less pronounced (0.09 ≤ P < 0.90). Feed supplementation with HS also reduced the prevalence of multidrug resistance (20.0% vs. 43.1%; P < 0.01) and led to a complete elimination of co-resistance to six and more antimicrobial classes. Additionally, no extended-spectrum beta-lactamase production could be predicted for E. coli isolates from HS-fed broilers. This is probably the first experimental study demonstrating a direct beneficial effect of HS-supplemented diet on the phenotypic resistance profiles of E. coli isolates from the ceca of commercially raised broiler chickens, showing that HS as feed additives can effectively reduce the phenotypic expression of antimicrobial resistance in E. coli.

Polarity and fluorescent fractions of manure dissolved organic matter could affect differently the adsorption and desorption of antibiotics in soils

The impacts of manure dissolved organic matter (DOM) on the adsorption and desorption of veterinary antibiotics in soils have not been fully explored. In this study, the effects of pig manure (PM) DOM and its hydrophilic and hydrophobic fractions on antibiotic adsorption and subsequent desorption in three topsoils of bamboo stands under different fertilization conditions (control, with heavy manure application, and with heavy manure application suspended) were examined by batch experiments, with the aid of excitation-emission matrix fluorescence spectroscopy, Fourier transformed infrared spectroscopy, and X-ray photoelectron spectroscopy. The addition of 100 mg-C L-1 PM DOM was found to increase the adsorption (in terms of the Freundlich affinity coefficient (Kf)) of florfenicol by 71.27%-132.23% but decrease the adsorption of doxycycline, enrofloxacin, and sulfamethazine by 41.67%-94.78%, 98.09%-99.99%, and 22.93%-67.20%, respectively. These effects resulted mainly from the increases in solution pH by PM DOM addition and preferential adsorption of PM DOM's protein-like fraction to the soils. Effects of hydrophilic and hydrophobic fractions of PM DOM were antibiotic and soil specific, except the increases in adsorption Kf of florfenicol in all tested soils. Among the four antibiotics, sulfamethazine exhibited the lowest Kf values in the soils with PM DOM addition during both the adsorption and desorption processes, implying that sulfamethazine may be the most leachable antibiotic in the field. The results of this study indicate that it is essential to consider the varying effects of the aromaticity and hydrophobicity of manure DOM in assessing the leaching risk of veterinary antibiotics in manured soils.

Pharmaceuticals removal from aqueous solution by water hyacinth (Eichhornia crassipes): a comprehensive investigation of kinetics, equilibrium, and thermodynamics

This study shows the efficiency of WH-C450, an adsorbent obtained from water hyacinth (WH) biomass, in the removal of sulfamethoxazole (SMX) from aqueous solutions. The process involves calcination of WH at 450 °C to produce an optimal adsorbent material capable of removing up to 73% of SMX and maximum SMX adsorption capacity of 132.23 mg/g. Fourier-transform infrared (FTIR) characterization reveals the involvement of various functional groups in the adsorption process through hydrogen bonds and electron-donor-acceptor (EDA) interactions. X-ray diffraction (XRD) analysis confirms the presence of phases containing CO32-, PO43- ions, as well as elements such as Si and Fe, which contribute to the adsorption mechanism through hydrogen bonding and complexation, respectively. X-ray photoelectron spectroscopy (XPS) analysis further supports these interactions. Kinetic analysis shows rapid adsorption, which combines physical and chemical processes and leads to rapid attainment of equilibrium. This is due to the high affinity of WH-C450 for SMX, which allows for a fast and efficient adsorption process. Isothermal modeling reveals multilayer adsorption with favorable interactions. Thermodynamic analysis confirms the endothermic and temperature-dependent nature of the process. In addition, pH, adsorbent dose, and initial concentration are important in adsorption. Lower pH levels enhance cationic SMX adsorption, while higher adsorbent doses improve efficiency. Optimal conditions were identified by experimental design, enabling the establishment of a predictive model. Consequently, the SMX removal capacity is strongly correlated with the initial concentration. This research underscores the potential of WH-C450 for antibiotic removal in water treatment applications.

Analysis of interactions between pharmaceuticals and humic acid: Characterization using entrapment and high-performance affinity microcolumns

The presence of pharmaceuticals as microcontaminants in the environment has become of particular concern given the growing increase in water reuse and recycling to promote global sustainability of this resource. Pharmaceuticals can often undergo reversible interactions with soluble dissolved organic material such as humic acid, which may be an important factor in determining the bioavailability and effects of these compounds in the environment. In this study, high-performance affinity microcolumns containing non-covalently entrapped and immobilized humic acid are used to examine the binding strength and interactions of this agent for tetracycline, carbamazepine, ciprofloxacin, and norfloxacin, all common pharmaceutical microcontaminants known to bind humic acid. The binding constants, as measured with Aldrich humic acid, have good agreement with values reported in the literature. In addition, the effects of temperature, ionic strength, and pH on these interactions are examined with the humic acid microcolumns. This technique makes it possible to determine the relative importance of electrostatic interactions vs non-polar interactions or hydrogen bonding on these binding processes. This study illustrates how affinity microcolumns can be used to screen and uniformly quantify binding by pharmaceuticals with humic acid, as well as to study the mechanisms of these interactions, with this information often being acquired in minutes and with small amounts of binding agent (∼10 mg per microcolumn, which could be used over 200-300 experiments). Use of entrapment and affinity microcolumns can support similar research for a wide range of other microcontaminants with humic acid or alternative binding agents found in water and the environment.

Three-birds-with-one-stone: An eco-friendly and renewable humic acid-derived material application strategy for macrolide antibiotic detection and multifunctional composite film preparation

This research proposes a simple and novel strategy for the green detection of antibiotics along with the reduction of microplastic and humic acid (HA) hazards. The entire process is based on a single-step solvent-sieving method to separate HA into insoluble (IHA) and soluble (SHA) components, subsequently recombining and designing the application according to the original characteristics of selected fractions in accordance with the zero-waste principle. IHA was applied as a dispersive solid phase extraction (DSPE) sorbent without chemical modification for the enrichment of trace MACs in complex biological matrices. The recovery of MACs was 74.06-100.84 % in the range of 2.5-1000 μg∙kg-1. Furthermore, SHA could be combined with biodegradable polyvinyl alcohol (PVA) to prepare multifunctional composite films. SHA endows the PVA film with favorable mechanical properties, excellent UV shielding as well as oxidation resistance performance. Compared with pure PVA, the tensile strength, toughness, antioxidant and UV-protection properties were increased to 157.3 Mpa, 258.6 MJ·m-3, 78.6 % and 60 % respectively. This study achieved a green and economically valuable utilization of all components of waste HA, introduced a novel approach for monitoring and controlling harmful substances and reducing white pollution. This has significant implications for promoting sustainable development and recovering valuable resources.

Assessing sorption of fluoroquinolone antibiotics in soils from a Kd compilation based on pure organic and mineral components

The presence of fluoroquinolone (FQ) antibiotics in soils may cause a threat to human health due to overexposure and the generation of antibiotic resistance genes. Understanding their sorption behavior in soils is important to predict subsequent FQ (bio) availability. Here, FQ sorption in pure soil organic (i.e., humic substances) and mineral (i.e., metal oxides; phyllosilicates) components is evaluated through a solid-liquid distribution coefficient (Kd (FQ)) dataset consisting of 243 entries originated from 80 different studies, to elucidate their respective contribution to the overall Kd (FQ) in bulk soils. First, different factors affecting FQ sorption and desorption in each of these soil phases are critically discussed. The strong role of pH in Kd (FQ), due to the simultaneous effect on both FQ speciation and surface charge changes, encouraged the derivation of normalized sorption coefficients for the cationic, zwitterionic and anionic FQ species in humic substances and in different phyllosilicates. Kd (FQ) in metal oxides revealed a key role of metal nature and material specific surface area due to complexation sorption mechanisms at neutral pH. Cumulative distribution functions (CDF) were applied to each dataset to establish a sorption affinity range for each phase and to derive best estimate Kd (FQ) values for those materials where normalized sorption coefficients to FQ species were unavailable. The data analysis conducted in the different soil phases set the basis for a Kd (FQ) prediction model, which combined the respective sorption affinity of each phase for FQ and phase abundance in soil to estimate Kd (FQ) in bulk soils. The model was subsequently validated with sorption data in well characterized soils compiled from the literature.

Adsorption behavior and interaction mechanism of microplastics with typical hydrophilic pharmaceuticals and personal care products

Microplastics (MPs) and pharmaceuticals and personal care products (PPCPs) are two types of emerging contaminants widely present in the global aquatic ecosystem. The ecological risks associated with the coexistence of these two contaminants have garnered increasing attention from researchers. In this study, we selected 15 typical hydrophilic PPCPs, including Sulfacetamide (SA), Thiamphenicol, Florfenicol, Chloramphenicol (CHL), Ampicillin, Cephalexin, Ofloxacin, Fluorouracil, Phenytoin, Theophylline, Cimetidine, Methylparaben, Diethyltoluamide, Benzophenone-2 (BP-2), and Benzophenone-4, as adsorbates. We evaluated the adsorption potential of five traditional plastics (TPs), namely Polyamide 6 (PA6), Polystyrene (PS), Polyethylene terephthalate (PET), Polyvinyl chloride (PVC), and Polyurethane (TPU), as well as three biodegradable plastics (BDPs), including Polylactic acid (PLA), Polybutylene succinate (PBS), and Poly (ε-caprolactone) (PCL), for these adsorbates. Out of the 120 combinations of MPs and PPCPs tested, only 24 exhibited significant adsorption behavior. Notably, the adsorption performance of the three BDPs was stronger than that of the three typical TPs (PS, PET, and PVC). Based on their adsorption potential, PA6, BDPs, phenytoin, and BP-2 were identified as potential sources of high ecological risk. To further explore the adsorption mechanism, we investigated the adsorption behaviors of SA, BP-2, and CHL on PA6. The conclusions were as follows: SA, BP-2, and CHL all reached adsorption equilibrium within 24 h, with the partition coefficient (Kd) following this order: BP-2 (8.051) ≫ SA (0.052) > CHL (0.018). The primary forces of adsorption were electrostatic interactions, intermolecular hydrogen bonding, and hydrophobic interaction, respectively. Additionally, weak electrostatic effects were observed in the adsorption of CHL and BP-2. The effects of pH, ionic strength, and fulvic acid on adsorption capacity varied. These results highlight a complex adsorption mechanism between MPs and hydrophilic contaminants in the aquatic environment. This study provides a basis for further evaluating the ecological risks of MPs and PPCPs combined pollution.

Sorption of four antibiotics onto pristine biochar derived from macadamia nutshell

In this study, the sorption properties of ciprofloxacin, ofloxacin, sulfamethoxazole, and trimethoprim on biochar derived from macadamia nut shells were investigated. The raw biomass was pyrolyzed at 600 °C to create a highly porous material with a surface area of 392 m2 g-1. The produced biochar was found to be a valuable material for both environmental remediation and carbon sequestration due to its high carbon and oxygen content. The sorption properties of four antibiotics on the produced biochar were compared using Bayesian nonlinear regression based on second-order kinetics and the Langmuir model. The Bayesian estimation successfully compared the adsorption coefficients of the antibiotics, which can be directly visualized through graphical grammar using the probability density distribution. The results demonstrated the ability of macadamia nut shell biochar to remove antibiotics from water at neutral pH, and this material has the potential to be used for treating other emerging contaminants.

Chemistry of soil-type dependent soil matrices and its influence on behaviors of pharmaceutical compounds (PCs) in soils

Behaviors of pharmaceutical compounds (PCs) in soil are usually determined by experimental extrapolation of results from separate constitutes to the soil, or from a special soil to other regional soil conditions. However, such extrapolation is problematic due to variations in soil clay mineral and organic matter (OM) compositions with soil types, which dominate the interaction mechanisms of PCs in soil. It is essential to review current literature to enhance our understanding of the soil-type dependent surface chemistry of soil matrices and the environmental behavior of PCs in different soil types. Major types of soils occur globally in parallel to the latitudinal or altitudinal zonation due to regional climate conditions with distinct clay mineral and OM compositions. The soil-type dependent surface chemistry results in variations in retention, distribution, transport, and transformation PCs in soil. The mixture of PCs of different classes usually exhibited enhanced sorption due to the cooperative multilayer sorption on soil constituents, and that of the same class often caused differential adsorption capacity compared to the sorption from single compound due to competitive sorption. PCs preferentially adsorb to a soil component, or to a special soil type, and exhibit notably soil-type dependent sorption affinity, mobility, and dissipation. The soil-dependent surface chemistry of soil is critical to predict the persistence and bioavailability of PCs in soil. In the future, more detailed studies of influence of individual soil factor on the behaviors of PCs and especially the practical field site investigation are required to better understand the sorption, transport, transformation, and ecotoxicology of PCs in typical soil types.

Adsorption-desorption behaviors of ciprofloxacin onto aged polystyrene fragments in aquatic environments

As two emerging pollutants of great concern, microplastics (MPs) and antibiotics inevitably cooccur in various aquatic environments and interact with each other, impacting the fate and ecological risks. Aging obviously complicates their interaction and deserves further study. Therefore, the adsorption-desorption behaviors of ciprofloxacin (CIP) onto polystyrene (PS) fragments with various aging extent were investigated, and the key physiochemical properties influencing the interaction and the interaction mechanisms were clarified by redundancy analysis, FTIR and XPS spectra. The physicochemical properties of PS MPs were significantly changed with aging time, and the morphological and chemical changes seemed to occur asynchronously. The adsorption of CIP onto the pristine PS MPs relied on physisorption, especially the ion-involving electrostatic and cation-π interaction. Due to the hydrogen bonding formed by the C-OH, CO, and O-CO groups of PS and CIP, the adsorption capacities of the aged PS MPs were greatly increased. The desorption efficiency of CIP from MPs in the gastric fluid was closely related to the solution ionic strengths, C-OH and CO groups of MPs, while that in the intestinal fluid was associated with O-CO groups of MPs. The different impact factors could be well described by the differences in the chemical components and pHs of the simulated gastric and intestinal fluids. This study gives a comprehensive understanding of the adsorption-desorption behaviors of antibiotics onto MPs at a molecular level and indicates that MPs could act as Trojan horses to transport antibiotics into aquatic organisms.

Green synthesis of Ag2O nanoparticles using Punica granatum leaf extract for sulfamethoxazole antibiotic adsorption: characterization, experimental study, modeling, and DFT calculation

Silver oxide (Ag2O) nanoparticles (NPs) were generated by synthesizing green leaf extract of Punica granatum, and afterwards they were used as adsorbent to remove the antibiotic additive sulfamethoxazole (SMX) from aqueous solutions. Prior of their use as adsorbent, the Ag2O NPs were characterized by various methods such as X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), scanning electron microscopy/energy-dispersive X-ray (SEM-EDX), and transmission electron microscopy (TEM). The Ag2O NPs were found to be spherically shaped and stabilized by the constituents of the extract. Further, at SMX antibiotic concentration of 100 mg L-1, the Ag2O NPs achieved almost complete removal of 98.93% within 90 min, and by using 0.8 g L-1 of adsorbent dose at pH=4 and temperature T=308 K. In addition, the experimental data were well fitted with the theoretical Langmuir model indicating homogeneous adsorbed layer of the SMX antibiotic on the Ag2O NPs surface. The maximum uptake capacity was 277.85 mg g-1. A good agreement was also found between the kinetic adsorption data and the theoretical pseudo-second-order model. Regarding the thermodynamic adsorption aspects, the data revealed an endothermic nature and confirmed the feasibility and the spontaneity of the adsorption reaction. Furthermore, the regeneration study has shown that the Ag2O NPs could be efficiently reused for up to five cycles. The geometric structures have been optimized and quantum chemical parameters were calculated for the SMX unprotonated (SMX+/-) and protonated (SMX+) using density functional theory (DFT) calculation. The DFT results indicated that the unprotonated SMX+/- reacts more favorably on the Ag2O surface, as compared to the protonated SMX+. The SMX binding mechanism was predominantly controlled by the electrostatic attraction, hydrogen bond, hydrophobic, and π-π interactions. The overall data suggest that the Ag2O NPs have promising potential for antibiotic removal from wastewater.

Behavior and mechanisms of ciprofloxacin adsorption on aged polylactic acid and polyethlene microplastics

Microplastics (MPs) and antibiotics are emerging pollutants in aquatic environments. MPs can absorb antibiotics, resulting in compound pollution. Batch adsorption experiments were used to investigate the adsorption behavior of CIP on polylactic (PLA) and polyethlene (PE) under various environmental conditions. After a lengthy aging process, both MPs underwent significant physicochemical changes. The equilibrium adsorption capacities of aged PLA and PE were 0.382 mg/g and 0.28 mg/g, respectively, which increased by 18.06% and 75% compared to pristine PLA and PE. The sorption capacity of MPs increased when the pH of the solution approached the dissociation constant (6.09, 8.74) of CIP. When the salinity of the solution was 3.5%, the adsorption capacity of MPs was reduced by more than 65%. The adsorption capacity of MPs rapidly decreased when 20 mg/L fulvic acid was added. Because norfloxacin (NOR) competes for adsorption sites on the microplastic, CIP adsorption is inhibited. Based on the adsorption models, FTIR, and XPS spectra, we demonstrated that the process was monolayer adsorption, with chemical and physical mechanisms including hydrogen bonding, π-π conjugation, ion exchange, and electrostatic interactions controlling it. Thus, PLA and PE microplastics may be a potential vector for CIP in water, and their interaction is mainly influenced by the physicochemical properties of the MPs and environmental factors.

Preparation of entrapment-based microcolumns for analysis of drug-humic acid interactions by high-performance affinity chromatography

Reversible interactions between drugs and humic acid in water can be an important factor in determining the bioavailability and effects of these pharmaceuticals as micropollutants in the environment. In this study, microcolumns containing entrapped humic acid were used in high-performance affinity chromatography (HPAC) to examine the binding of this agent with the drugs tetracycline, carbamazepine, ciprofloxacin, and norfloxacin. Parameters that were varied to optimize the entrapment of humic acid within HPLC-grade porous silica included the starting concentration of humic acid, the mass ratio of humic acid vs silica, and the method of mixing the reagents with the support for the entrapment process. The highest retention for the tested drugs was obtained when using supports that were prepared using an initial humic acid concentration of 80 mg mL^-1 and a humic acid vs silica mass ratio of 600 mg per g silica, along with preincubation of the humic acid with hydrazide-activated silica before the addition of a capping agent (i.e., oxidized glycogen). Characterization of the humic acid support was also carried out by means of TGA, FTIR, SEM, and energy-dispersive X-ray spectroscopy. The binding constants measured by HPAC for the given drugs with entrapped Aldrich humic acid gave good agreement with values reported in the literature under similar pH and temperature conditions for this and other forms of humic acid. Besides providing valuable data on the binding strength of various drugs with humic acid, this work illustrates how HPAC may be used as an analytical tool for screening and characterizing the interactions of drugs and man-made contaminants with humic acid or related binding agents in water and the environment.

Magnetic-Transition-Metal Oxides Modified Pollen-Derived Porous Carbon for Enhanced Absorption Performance

In our work, the transition-metal-oxide precursor (TMO@BC, M = Fe, Co, Ni) has been loaded on the pollen carbon by the hydrothermal method and annealed at different temperatures to generate a composite material of metal oxide and pollen carbon in this study, which can effectively prevent agglomeration caused by a small size and magnetism. The XRD patterns of the samples showed that the as-synthesized metal oxides were γ-Fe₂O₃, CoO, and NiO. In the 20 mg/L methyl orange adsorption experiment, the adsorption amount of CoO@C at 500 ℃ reached 19.32 mg/g and the removal rate was 96.61%. Therefore, CoO@C was selected for the adsorption correlation-model-fitting analysis, which was in line with the secondary reaction. The pseudo-second-order kinetic model (R²: 0.9683-0.9964), the intraparticle diffusion model, and the Freundlich adsorption isotherm model indicated that the adsorption process was the result of both physical and chemical adsorptions, and the judgment was based on the electrostatic action. The adsorption and removal efficiency of ciprofloxacin (CIP) by changing the pH of the reaction was about 80%, so the electrostatic attraction worked, but not the main factor. Recovered by an external magnetic field, the three-time recycling efficiency was still maintained at more than 80%. This novel biomass-derived magnetic porous carbon material embedded with transition-metal-oxide nanoparticles is highly promising for many applications, especially in the field of environmental remediation.

Spatial heterogeneity of particulate organic matter for the sorption of ciprofloxacin at the microstructure scale

Particulate organic matter (POM) is a major antibiotic sorbent of the active soil organic carbon pool. Until now, the spatial heterogeneity of POM for ciprofloxacin (CFC) sorption at the microstructure scale has not been quantified. To our knowledge, this is the first study that combines a batch sorption experiment, NanoSIMS, and a ¹³C isotopic tracer to expound the distribution characteristics of CFC and the dominant sorption components of POM. Four POMs separated from soils (wetland, oil waste field, and farmlands) were utilized to study the sorption mechanisms using batch experiments. POM separated from the wetland was utilized for further study at the microstructure scale. The results revealed that the POM had a great CFC sorption capacity ranging from 65.20 mg g^-1 to 77.51 mg g^-1. Both the kinetics and NanoSIMS results showed that the sorption mechanisms included surface distribution and intra-particle diffusion. The microstructural distribution characteristics exhibited a marginal accumulation tendency and a surface accumulation effect. A combination of the NanoSIMS with the pH and salinity results explained that CFC adsorption was dominated by the organic components of POM. Overall, the present study demonstrates that the characteristics and organic components of the POM played a decisive role in the CFC-POM interactions. This study provides the first evidence of the vector potential of CFC rereleased into the environment during the POM turnover process.

Interaction of Antibiotics and Humic Substances: Environmental Consequences and Remediation Prospects

The occurrence and distribution of antibiotics in the environment has received increasing attention due to their potential adverse effects on human health and ecosystems. Humic substances (HS) influence the mobility, reactivity, and bioavailability of antibiotics in the environment significantly due to their interaction. As a result, HS can affect the dissemination of antibiotic-resistance genes, which is one of the main problems arising from contamination with antibiotics. The review provides quantitative data on the binding of HS with fluoroquinolones, macrolides, sulfonamides, and tetracyclines and reports the proposed mechanisms of their interaction. The main issues of the quantification of antibiotic-HS interaction are discussed, which are a development of standard approaches and the accumulation of a dataset using a standard methodology. This would allow the implementation of a meta-analysis of data to reveal the patterns of the binding of antibiotics to HS. Examples of successful development of humic-based sorbents for fluoroquinolone and tetracycline removal from environmental water systems or polluted wastewaters were given. Data on the various effects of HS on the dissemination of antibiotic-resistance genes (ARGs) were summarized. The detailed characterization of HS properties as a key point of assessing the environmental consequences of the formation of antibiotic-HS complexes, such as the dissemination of antibiotic resistance, was proposed.

Interface engineering of p-p Z-scheme BiOBr/Bi12O17Br2 for sulfamethoxazole photocatalytic degradation

The Z-scheme heterojunction has received widespread attention due to it can effectively improve the photocatalytic activity of photocatalytic materials. In this paper, a p-p Z-scheme hererojunction composed of bismuth oxybromide and oxygen-rich bismuth oxybromide was synthesized via facile one-step solvothermal method. Based on the characterization results, we demonstrated that the BiOBr/B_i12O₁₇Br₂ Z-scheme heterojunction was synthesized by intimate interface contact between BiOBr and B_i12O₁₇Br₂ p-type semiconductors. This endowed the heterojunction composite with excellent photogenerated carrier transfer ability and photogenerated electron-hole separation performance compared with pure BiOBr and B_i12O₁₇Br₂ materials, which were proven by photoelectrochemical measurement, photoluminescence spectra. The maximum photocurrent of BiOBr/Bi₁₂O₁₇Br₂ (≈0.32 μA) is approximately 3 times that of the original BiOBr (≈0.08 μA ) when light is irradiated. In addition, the BiOBr/B_i12O₁₇Br₂ p-p Z-scheme composite photocatalyst had good photocatalytic activity for sulfamethoxazole, with ·O₂^- free radicals as the main active species. It could photodegrade 99% sulfamethoxazole under light irradiation at 365 nm, and its degradation rate was approximately 13 times that of BiOBr and 1.5 times that of B_i12O₁₇Br₂ materials. Notably, BiOBr/B_i12O₁₇Br₂ exhibited an excellent performance after 4 consecutive runs. Besides, the possible degradation pathway of sulfamethoxazole was proposed. This work has reference significance for the construction of p-p Z-scheme heterojunctions and the treatment of environmental contaminants.

Shrimp waste-derived porous carbon adsorbent: Performance, mechanism, and application of machine learning

Aquaculture generates significant amount of processing wastes (more than 500 million pounds annually in the United States), the bulk of which ends up in the environment or is used in animal feed. Proper utilization of shrimp waste can increase their economic value and divert them from landfills. In this study, shrimp waste was converted to a porous carbon (named SPC) via direct pyrolysis and activation. SPC was characterized, and its performance for adsorbing ciprofloxacin from simulated water, natural waters, and wastewater was benchmarked against a commercial powdered activated carbon (PAC). The surface area of SPC (2262 m²/g) exceeded that of PAC (984 m²/g) due to abundance of micropores and mesopores. The adsorption of ciprofloxacin by SPC was thermodynamically spontaneous (ΔG = -19 kJ/mol) and fast (k₁ = 1.05/min) at 25 °C. The capacity of SPC for ciprofloxacin (442 mg/g) was higher than that of PAC (181 mg/g). SPC also efficiently and simultaneously removed low concentrations (200 µg/L) of ciprofloxacin, long-chain per- and polyfluoroalkyl substances (PFAS), and Cu ions from water. An artificial neural network function was derived to predict ciprofloxacin adsorption and identify the relative contribution of each input parameter. This study demonstrates a sustainable and commercially viable pathway to reuse shrimp processing wastes.

Microplastic properties and their interaction with hydrophobic organic contaminants: a review

Microplastics (MPs) have been defined as particles of size < 5 mm and are characterized by hydrophobicity and large surface areas. MPs interact with co-occurring hydrophobic organic contaminants (HOCs) via sorption-desorption processes in aquatic and terrestrial environments. Ingestion of MPs by living organisms may increase exposure to HOC levels. The key mechanisms for the sorption of HOCs onto MPs are hydrophobic interaction, electrostatic interaction, π-π interactions, hydrogen bonding, and Van der Waals forces (vdW). Polymer type, UV-light-induced surface modifications, and the formation of oxygen-containing functional groups have a greater influence on electrostatic and hydrogen bonding interactions. In contrast, the formation of oxygen-containing functional groups negatively influences hydrophobic interaction. MP characteristics such as crystallinity, weathering, and surface morphology affect sorption capacity. Matrix properties such as pH, ionic strength, and dissolved organic matter (DOM) also influence sorption capacity by exerting synergistic/antagonistic effects. We reviewed the mechanisms of HOC sorption onto MPs and the polymer and matrix properties that influence the HOC sorption. Knowledge gaps and future research directions are outlined.

New nanostructured activated biochar for effective removal of antibiotic ciprofloxacin from wastewater: Adsorption dynamics and mechanisms

Developing green inexpensive and effective adsorbents is critically needed for elimination of antibiotics from contaminated water. The current study assessed the nanostructured activated biochar (nPPAB) derived from pomegranate peels (PP) as a promising sorbent for efficient removal of the antibiotic ciprofloxacin (CIP). The results affirm that the second order and Langmuir models fit well to adsorption kinetics and equilibrium data respectively. The nPPAB adsorption capacity of Langmuir (q_max) for CIP was 142.86 mg g^-1 which is 26.85 times greater than that of bulk PP. Hydrogen bonding, π-π interaction, hydrophobic and electrostatic interactions are the dominant mechanisms of CIP adsorption by nPPAB. The efficiency of nPPAB for CIP removal from real wastewater using batch and packed-bed reactor were 89.94 and 84.74% respectively. This study clearly demonstrated the substantial capacity of nPPAB as an ecofriendly, feasible, and in-expensive adsorbent for successful elimination of CIP from wastewater.

Sorption and desorption behavior of four antibiotics at concentrations simulating wastewater reuse in agricultural and forested soils

Due to rises in antibiotic resistance, fate and transport of antibiotics in soil systems requires greater understanding to determine potential risks to human and animal health. Adsorption coefficients (K_d and K_f) are standard measures for determining sorption capacity and partitioning behavior of organic contaminants in solid matrices. Frequently, sorption studies use higher antibiotic concentrations (mg L^-1) and larger spiked water volume to mass of soil (>5:1), which may not reflect sorption behaviors of antibiotics at low concentrations (ng L^-1 - μg L^-1) in natural soils. The aim of this study was to determine sorption and desorption behaviors of four antibiotics commonly found in soils due to wastewater reuse using parameters replicating typical soil conditions. Concentrations (μg L^-1) of sulfamethoxazole (SMX), trimethoprim (TMP), lincomycin (LIN) and ofloxacin (OFL) were equilibrated with four soil types at a 2:1 ratio of spiked water volume to mass of soil, which better represents field conditions. Log K_f and log K_foc value ranges in this study were 1.88-1.95 and 3.2-4.7 for TMP, 0.43-1.4 and 2.7-3.2 for SMX, and 0.65-1.4 and 2.0-4.1 for LIN, respectively. Ofloxacin adsorbed tightly to soil particles, and adsorption coefficients could not be calculated. Sorption values were higher than previous studies that used similar soil types but had higher ratios of spiking solution to mass of soil (>5:1). Overall, OFL and TMP are expected to strongly interact with soil particles and be less mobile, while SMX and LIN are expected to be more mobile due to weaker sorption interactions.

Chemical Fate and Partitioning Behavior of Antibiotics in the Aquatic Environment-A Review

Antibiotics in the aquatic environment is a major problem because of the emergence of antibiotic resistance. The long-term ecological impact on the aquatic environment is unknown. Many sources allow entry of antibiotics into the environment, including wastewater-treatment plants (WWTPs), agricultural runoff, hospital effluent, and landfill leachate. Concentrations of antibiotics in the aquatic environment vary significantly; studies have shown fluoroquinolones, tetracycline, macrolides, sulfonamides, and penicillins to reach 2900, 1500, 9700, 21 400, and 1600 ng L^-1 in wastewater effluent samples, respectively. However, concentrations are highly variable between different countries and depend on several factors including seasonal variation, prescription, and WWTP operating procedures. Likewise, the reported concentrations that cause environmental effects vary greatly between antibiotics, even within the same class; however, this predicted concentration for the antibiotics considered was frequently <1000 ngL^-1 , indicating that when discharged into the environment along with treated effluent, these antibiotics have a potentially detrimental effect on the environment. Antibiotics are generally quite hydrophilic in nature; however, they can ionize in the aquatic environment to form charged structures, such as cations, zwitterions, and anions. Certain classes, particularly fluoroquinolones and tetracyclines, can adsorb onto solid matrices, including soils, sediment, and sludge, making it difficult to fully understand their chemical fate in the aquatic environment. The adsorption coefficient (K_d ) varies between different classes of antibiotics, with tetracyclines and fluoroquinolones showing the highest K_d values. The K_d values for fluoroquinolones, tetracyclines, macrolides, and sulfonamides have been reported as 54 600, 7600, 130, and 1.37 L kg^-1 , respectively. Factors such as pH of the environment, solid matrix (sediment/soil sludge), and ionic strength can influence the K_d ; therefore, several values exist in literature for the same compound. Environ Toxicol Chem 2021;40:3275-3298. © 2021 SETAC.

Enhancing Fenton-like process at neutral pH by Fe(III)-GLDA complexation for the oxidation removal of organic pollutants

N,N-bis(carboxymethyl)glutamic acid (GLDA) was utilized in this study to significantly enhance the Fe(III) mediated Fenton-like oxidation removal of organic pollutants at neutral pH, in which ciprofloxacin (CIP) was used as the model pollutant. The CIP degradation rate in the GLDA/Fe(III)/H₂O₂ system reached 96.5% within 180 min and was nearly 14 times higher than that in the Fe(III)/H₂O₂ system. This enhancement was contributed to the acceleration of the cycle of Fe(III)/Fe(II) caused by GLDA, which was verified by UV-vis spectroscopy, cyclic voltammetry, and radical quenching experiments. The results proved that the GLDA could complex with Fe(III) and greatly modify the redox potential of Fe(III)/Fe(II). Moreover, radical quenching experiments confirmed that •OH and O₂^·- were the mainly species for CIP degradation, and O₂^·- was responsible for 81.9% •OH generation. In addition, H₂O₂ utilization kinetic modeling was also investigated. The optimum parameters of the 100 μM Fe(III)-GLDA complex and 15 mM H₂O₂ were attained by lot-size optimization experiments. Two possible CIP degradation pathways were proposed on the basis of the intermediates identified by MS/MS. The GLDA/Fe(III)/H₂O₂ system performed better than common chelating agents at the same condition, manifesting good potential for environmental concerns.

Interactions between microplastics, pharmaceuticals and personal care products: Implications for vector transport

Microplastics are well known for vector transport of hydrophobic organic contaminants, and there are growing concerns regarding their potential adverse effects on ecosystems and human health. However, recent studies focussing on hydrophilic compounds, such as pharmaceuticals and personal care products (PPCPs), have shown that the compounds ability to be adsorbed onto plastic surfaces. The extensive use of PPCPs has led to their ubiquitous presence in the environment resulting in their cooccurrence with microplastics. The partitioning between plastics and PPCPs and their fate through vector transport are determined by various physicochemical characteristics and environmental conditions of specific matrices. Although the sorption capacities of microplastics for different PPCP compounds have been investigated extensively, these findings have not yet been synthesized and analyzed critically. The specific objectives of this review were to synthesize and critically assess the various factors that affect the adsorption of hydrophilic compounds such as PPCPs on microplastic surfaces and their fate and transport in the environment. The review also focuses on environmental factors such as pH, salinity, and dissolved organics, and properties of polymers and PPCP compounds, and the relationships with sorption dynamics and mechanisms. Furthermore, the ecotoxicological effects of PPCP-sorbed microplastics on biota and human health are also discussed.

Detoxification of Ciprofloxacin in an Anaerobic Bioprocess Supplemented with Magnetic Carbon Nanotubes: Contribution of Adsorption and Biodegradation Mechanisms

In anaerobic bioreactors, the electrons produced during the oxidation of organic matter can potentially be used for the biological reduction of pharmaceuticals in wastewaters. Common electron transfer limitations benefit from the acceleration of reactions through utilization of redox mediators (RM). This work explores the potential of carbon nanomaterials (CNM) as RM on the anaerobic removal of ciprofloxacin (CIP). Pristine and tailored carbon nanotubes (CNT) were first tested for chemical reduction of CIP, and pristine CNT was found as the best material, so it was further utilized in biological anaerobic assays with anaerobic granular sludge (GS). In addition, magnetic CNT were prepared and also tested in biological assays, as they are easier to be recovered and reused. In biological tests with CNM, approximately 99% CIP removal was achieved, and the reaction rates increased ≈1.5-fold relatively to the control without CNM. In these experiments, CIP adsorption onto GS and CNM was above 90%. Despite, after applying three successive cycles of CIP addition, the catalytic properties of magnetic CNT were maintained while adsorption decreased to 29 ± 3.2%, as the result of CNM overload by CIP. The results suggest the combined occurrence of different mechanisms for CIP removal: adsorption on GS and/or CNM, and biological reduction or oxidation, which can be accelerated by the presence of CNM. After biological treatment with CNM, toxicity towards Vibrio fischeri was evaluated, resulting in ≈ 46% detoxification of CIP solution, showing the advantages of combining biological treatment with CNM for CIP removal.

Sorption of pharmaceuticals and personal care products on soil and soil components: Influencing factors and mechanisms

The sorption of pharmaceuticals and personal care products (PPCPs) on soil and soil components makes an important contribution to the fate, migration and bioavailability of PPCPs. Previous reviews have mostly focused on the sorption of PPCPs on single soil components (e.g., minerals and soil organic matter). However, the sorption of PPCPs within the whole soil system has not been systematically analyzed. This paper reviews the recent progress on PPCP sorption on soil and soil components. We have evaluated the sorption of a wide range of PPCPs in research fields that are usually considered in isolation (e.g., humic acids (HAs), montmorillonite, kaolinite, and goethite), and established a bridge between PPCPs and sorbent. The sorption mechanisms of PPCPs, e.g., cation exchange, surface complexation, electrostatic interaction and hydrogen bonding, are discussed and critically evaluated. We also assessed the influence of environmental factors (pH, ionic strength, organic matter and temperature) on sorption. This review summarizes the knowledge of PPCPs sorption on soil gained in recent years, which can provide new strategies for solving the problem of antibiotic pollution.

Adsorption of nitrification inhibitor nitrapyrin by humic acid and fulvic acid in black soil: characteristics and mechanism

The compound nitrapyrin is easily adsorbed by soil organic matter in high-organic matter soils, and this results in its effectiveness reducing significantly. In this study, the adsorption characteristics and mechanisms of nitrapyrin as an adsorptive on humic acid (HA) and fulvic acid (FA) as adsorbents were investigated. The results showed that the kinetics of adsorption of nitrapyrin on both HA and FA followed pseudo-second-order kinetic models (R² ≥ 0.925, P < 0.05) and the adsorption process included an initial fast-adsorption stage and a slow-adsorption stage thereafter. The adsorption efficiencies of nitrapyrin on HA + FA were higher than that on HA or FA alone, and that of HA was higher than that of FA. The adsorption isotherms of nitrapyrin on HA and FA could be optimally fitted with the Langmuir equation (R² ≥ 0.982, P < 0.05). The maximum adsorption capacities of nitrapyrin on HA, FA and HA + FA were 4896.49, 3173.70 and 4925.56 mg kg⁻¹, respectively. Synergistic adsorption of nitrapyrin in co-existing systems of HA and FA was also observed. The adsorption mechanism of nitrapyrin on both HA and FA involved hydrogen bonding and hydrophobic interaction. Therefore, HA and FA in the soil environment can adsorb a large amount of nitrapyrin and reduce its effectiveness, and they have a positive synergistic effect.

The compound nitrapyrin is easily adsorbed by soil organic matter in high-organic matter soils, and this results in its effectiveness reducing significantly.

Sulfamethoxazole sorption by cattail and switchgrass roots

Sorption to roots is one of several mechanisms by which plant-assisted attenuation of antibiotics can be achieved. The objectives of this study were to (1) evaluate the sorption of sulfamethoxazole (SMX) by cattail and switchgrass roots, (2) determine the kinetics of SMX sorption by cattail and switchgrass roots, and (3) characterize the temperature-dependency of SMX sorption. A batch sorption experiment was conducted to measure SMX sorption by roots of the two plant species using five initial antibiotic concentrations (2.5, 5, 10, 15, and 20 µg L^-1) and eight sampling times (0, 0.5, 1, 2, 4, 8, 12, and 24 h). Another batch experiment was conducted at three temperatures (5, 15, and 25 °C) to determine the effect of temperature on sorption kinetics. SMX sorption followed pseudo-second-order kinetics. The pseudo-second-order rate constant (k2) decreased with increasing temperature for both plant species. The rate constant followed the order: 5 °C = 15 °C > 25 °C for cattail and 5 °C > 15 °C = 25 °C for switchgrass. Results from this study show that switchgrass roots are more effective than cattail roots in the removal of SMX. Therefore, the use of switchgrass in systems designed for phytoremediation of contaminants might also provide an efficient removal of some antibiotics.

Biosorptive interaction of alkaline modified Dialium guineense seed powders with ciprofloxacin in contaminated solution: central composite, kinetics, isotherm, thermodynamics, and desorption

This work evaluated the use of Dialium guineense seed waste (DGS) and its sodium hydroxide modified form (NH-DGS) as biosorbent for ciprofloxacin (CPF) from synthetic solution as well as the desorption potentials. Central composite design (CCD) was applied for optimization of the alkaline treated biosorbent by response surface methodology using design expert. Both biosorbents were characterized by FTIR, SEM, EDX, and BET analysis. The CCD showed NaOH concentration of 0.46 M and temperature of 96 °C to be effective for optimized modification of NH-DGS. Optimum removal of CPF was obtained at pH 6.0, contact time 120 min, temperature 300 K, and dosage of 0.1 g. The Freundlich model gave the best fit compared to the other isotherms tested with R² values >0.97951. NH-DGS exhibited a maximum uptake capacity of 120.34 mg/g higher than some reported adsorbents for CPF. The pseudo-second-order model was suitable in the fitting of the kinetic data. A non-spontaneous process was obtained for CPF biosorption on DGS which became spontaneous after alkaline treatment. Over 84% desorption of CPF was achieved on both biosorbents using 0.3 M HCl which envisaged the use of NH-DGS as an efficient material for treatment of waters contaminated with CPF.

Insights into the isotherm and kinetic models for the coadsorption of pharmaceuticals in the absence and presence of metal ions: A review

Pharmaceuticals are a wide class of emerging pollutants due to their continuous and the increasing consumption of users. These pollutants are usually found in the real environment as mixtures alone or with metal ions. Thus, the migration risk increases, which complicates the removal of pharmaceuticals because of the combined and synergistic effects. The focus of treatment of pharmaceutical mixtures and their coexistence with metals is of considerable importance. For this purpose, adsorption has been efficiently applied to several studies for the treatment of such complex systems. In this article, the coadsorption behavior of pharmaceuticals in the absence and existence of metals on several adsorbents has been reviewed. The adsorption isotherms and kinetics of these two systems have been analyzed using different models and discussed. Important challenges and promising routes are suggested for the future development of the coadsorption of the studied systems. This article provides an overview on the most utilized and effective adsorbents, widely studied adsorbates, best applied isotherm and kinetic models, and competitive effect in coadsorption of pharmaceuticals, both with and without metals.

Application of Fe-based metal-organic framework and its pyrolysis products for sulfonamide treatment

The occurrence and fate of antibiotic compounds in water can adversely affect human and animal health; hence, the removal of such substrates from soil and water is indispensable. Herein, we described the synthesis method of mesoporous carbon (MPC) via the pyrolysis route from a coordination polymer Fe-based MIL-53 (or MIL-53, shortly). The MPC structure was analyzed by several physical techniques such as SEM, TEM, BET, FT-IR, VSM, and XRD. The response surface methodology (RSM) was applied to find out the effects of initial concentration, MPC dosage, and pH on the removal efficiency of trimethoprim (TMP) and sulfamethoxazole (SMX) antibiotics in water. Under the optimized conditions, the removal efficiencies of TMP and SMX were found to be 87% and 99%, respectively. Moreover, the adsorption kinetic and isotherm studies showed that chemisorption and the monolayer adsorption controlled the adsorption process. The leaching test and recyclability studies indicated that the MPC structure was stable and can be reused for at least four times without any considerable change in the removal efficiency. Plausible adsorption mechanisms were also addressed in this study. Because of high maximum adsorption capacity (85.5 mg/g and 131.6 mg/g for TMP and SMX, respectively) and efficient reusability, MPC is recommended to be a potential adsorbent for TMP and SMX from water media.

Magnetic nanosorbents with siliceous hybrid shells of alginic acid and carrageenan for removal of ciprofloxacin

Water contamination with antibiotics is a serious environmental threat. Ciprofloxacin (CIP) is one of the most frequently detected antibiotics in water. Herein, silica-based magnetic nanosorbents prepared using three seaweed polysaccharides, alginic acid, κ- and λ-carrageenan, were developed and evaluated in the uptake of ciprofloxacin. The sorbents were firstly characterized in detail to assess their morphology and composition. A systematic investigation was conducted to study the adsorption performance towards CIP, by varying the initial pH, contact time and initial CIP concentration. The maximum adsorption capacity was 464, 423 and 1350 mg/g for particles prepared from alginic acid, κ- and λ-carrageenan respectively. These high values indicate that these materials are among the most effective sorbents reported so far for the removal of CIP from water. The kinetic data were consistent with the pseudo-second-order model. The CIP adsorption on λ-carrageenan particles followed a cooperative process with sigmoidal isotherm that was described by the Dubinin-Radushkevich model. The high charge density of λ-carrageenan and the propensity of CIP molecules to self-aggregate may explain the cooperative nature of CIP adsorption. The sorbents were easily regenerated in mild conditions and could be reused in CIP removal up to 4 times without a significant loss of adsorptive properties.

Simultaneous analysis of multiclass contaminants of emerging concern in sediments by liquid chromatography with tandem quadrupole mass spectrometry

A quick, easy, cheap, effective, rugged, and safe (QuEChERS)-based extraction and simultaneous dispersive solid-phase extraction (dSPE) clean-up method was developed for contaminants of emerging concern (CECs) in sediment samples. Hydration with a phosphate buffer (pH 2.0) and salting out with NaCl and MgSO₄ facilitated the extraction and liquid-liquid portioning of the aqueous and organic phases. Cleanup of the extracts was achieved by florisil and C18 (1:1) sorbents in dSPE with minimal compromise of the analytes. The extracts were clean enough for determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The procedure was validated for preservatives, blood lipid regulators, analgesics and anti-inflammatory drugs, plasticizers, and other classes of CECs in sediment matrix spiked at 6 levels between 1- and 40-fold concentrations for CECs of varying analytical sensitivities. The recovery values were generally between approximately 27 and 120% and the relative standard deviation (%RSD) values were below 20% at 10- , 20- , and 40-fold spiking levels, albeit the recoveries for some analytes dropped at low spike concentrations. The method showed high sensitivity where the method detection limits (MDLs) were at low ppb levels for the majority of the analytes that ranged between 0.002 and 1.93 µg/kg. The method performance was also compared with well-established US Environmental Protection Agency (USEPA) Method 1694 by analyzing sediment samples collected from Yundang Lagoon (Xiamen, China) with field-incurred CEC residues. The sediment samples were detected with residues of parabens, gemfibrozil, ketoprofen, naproxen, fenoprofen, diclofenac, miconazole, carbamazepine, benzophenon-3, glibenclamide, sildinafil citrate, and some bisphenol analogues. Environ Toxicol Chem 2019;38:1409-1422. © 2019 SETAC.