Assembly strategies of organic-based imaging agents for fluorescence and photoacoustic bioimaging applications

Rational Design of Fluoro-photoacoustic Probes for In Situ Imaging of Endogenous β-Galactosidase Activity and Autophagy

In situ tracking of lysosomal biomarkers has facilitated the unraveling of complex lysosome-associated biological processes and functions. Conventional lysosomal probes typically rely on amine-containing motifs for lysosomal accumulation; however, these motifs would impact lysosomal acidity and disrupt cellular homeostasis due to the proton buffering. To address these issues, this study reports a new strategy for constructing nonamino-dependent lysosomal tracking probes by incorporating an acid-responsive and noninvasive fluoro-photoacoustic scaffold HD-BTZ. Leveraging an ICT mechanism, the HD-BTZ scaffold could respond to the acid environment, enabling in situ visualization of lysosomal dynamics with minimal proton buffering effects. As a proof of concept, two activable molecular probes, HD-BTZ-gal and HD-BTZ-photo, were designed by integrating β-galactosidase's substrate or photolytic protecting groups into the HD-BTZ fluorophore scaffold for in situ tracking of β-galactosidase in lysosomes and lysosome-associated autophagy, respectively. The probes exhibit excellent dual-target activation properties, for which the HD-BTZ-gal probe enables in situ imaging of lysosomal β-galactosidase, while the HD-BTZ-photo probe could be employed for in situ tracking of autophagy by monitoring the dynamic changes in lysosomal pH in living cells. In vivo experiments showed that HD-BTZ-gal allowed for fluorescence/photoacoustic dual-mode imaging of chemotherapy-induced senescence in tumors, suggesting that this strategy could provide an effective approach for evaluating and monitoring age-related diseases.

Polymer-Based Raman/PET Dual-Modal Probe for Preoperative Tumor Diagnosis and Intraoperative Image-Guided Surgery and Phototherapy

Integration of Raman imaging and positron emission tomography (PET) holds great promise for providing complementary information for precise cancer diagnosis and imaging-guided therapy. However, current existing Raman/PET dual-modal probes primarily rely on surface-enhanced Raman scattering, raising clinical concerns about the biosafety of the substrates. Herein, we developed a novel substrate-free Raman/PET probe-[18F]-AS-DPPT-TT NPs, which integrates a biocompatible polymer DPPT-TT that possesses strong Raman signals and photothermal effects, along with radiolabeling by short-lived 18F radionuclide and functionalization with tumor-targeting AS1411 aptamer. The [18F]-AS-DPPT-TT NPs generate ultrasensitive resonance Raman signals under 785 nm excitation, due to their absorption peak closely matching the excitation light, and exhibit significant photothermal effects for tumor cell ablation under 808 nm excitation. In the orthotopic colon cancer mouse models, [18F]-AS-DPPT-TT NPs enabled preoperative PET imaging for high-contrast whole-body tumor localization and simultaneously provided intraoperative Raman imaging for accurate tumor boundary delineation and micrometastasis detection (as small as 0.58 mm × 0.32 mm). Moreover, Raman imaging-guided surgery combined with photothermal therapy achieved complete elimination of primary and metastatic tumors, significantly decreasing the recurrence rates. This Raman/PET dual-modal probe effectively combines the strengths of Raman and PET imaging, providing a robust platform for comprehensive tumor management from preoperative planning to intraoperative intervention.

Advances in nano-delivery systems based on diagnosis and theranostics strategy for atherosclerosis

Atherosclerosis (AS) is a chronic systemic inflammatory disease, where early diagnosis and theranostics strategy for AS are crucial for improving outcomes. However, conventional diagnostic techniques are limited in identifying early AS lesions, failing to stop the progression of AS in time. Nano-delivery systems have shown significant potential in AS diagnosis and treatment, offering distinct advantages in plaque identification and enhancing drugs concentration at lesion sites, thereby advancing new-generation theranostics strategy. This review discusses the application of nano-delivery systems based on imaging technology in AS diagnosis, and we further explore recent advancements in combining different imaging technologies with emerging theranostics strategy. In addition, we also discuss the challenges faced by nano-delivery systems for AS diagnosis and theranostics in clinical translation, such as nanoparticle targeting efficiency, cytotoxicity and long-term accumulation, immune clearance and inaccurate disease modelling. Finally, we also provide prospects on nano-delivery systems based on diagnostic and therapeutic strategies.

A unique fluorescence metal-organic framework for ultrasensitive fluorescent and colorimetric bimodal detection of phosphate

Monitoring the concentration of phosphate is crucial for environmental protection and human health due to its severe ecological and health risks associated with elevated concentrations. Herein, a fluorescent-colorimetric bimodal nanoprobe based on the unique fluorescent metal-organic frameworks (Zr-PDI) has been developed for high-efficiency quantification of phosphate. The metal-oxygen coordination in Zr-PDI effectively diminished its fluorescence. However, the introduction of phosphate could weaken the metal-oxygen coordination interaction, leading to fluorescence recovery and absorption spectra changes of Zr-PDI. Taking advantage of these characteristics, Zr-PDI was exploited as a fluorescent-colorimetric bimodal detection tool for phosphate, offering excellent selectivity, a wide detection range, and high accuracy. Notably, the detection limit of fluorescence detection mode was as low as 0.023 μM, enabling ultrasensitive detection of phosphate. Furthermore, the Zr-PDI-based nanoprobe has achieved sensitive and reliable quantification of phosphate in Yong River and diabetic mouse serum samples. This proposed strategy provides a powerful, convenient, and practical tool for detecting phosphate in environmental and biological samples.

In vivo imaging of alkaline phosphatase in lipid metabolic diseases with a photoacoustic probe

Lipid metabolic diseases have become an important challenge to global public health. Along with lifestyle changes, the incidence of obesity, diabetes and other metabolic syndromes is on the rise, and the number of patients with fatty liver disease is also increasing. Therefore, it is particularly important to develop effective lipid imaging strategies to monitor and manage fatty liver disease. Herein, based on the essential role of alkaline phosphatase (ALP) in both AS and OB, in vivo imaging of ALP was achieved in two lipid metabolic diseases models with a photoacoustic (PA) probe phosphorylated hemicyanine (P-Hcy). After being triggered by ALP, P-Hcy responded in different modalities including absorbance, fluorescence and, most significantly, PA-reporting. Notably, the PA signal showed the reliable linear correlation to the ALP level within the range of 0-800 U/L. The probe P-Hcy exhibited the advantages including high sensitivity, high selectivity, and steadiness in required biological conditions. The intracellular imaging results ensured that P-Hcy could visualize the ALP level in the foam cells induced from mouse mononuclear macrophages. In the healthy and lipid metabolic diseases models, P-Hcy was able to distinguish well between a lipid metabolic disease model and a healthy mouse model by photoacoustic imaging. By combining the ALP detection with P-Hcy in PA/fluorescence modality and traditional techniques such as blood biochemical testing and immunohistochemically staining, more potential strategy to accurately diagnose lipid metabolic diseases in the pre-clinical trials might be developed in future.

Recent Advances in NIR-Switchable Multi-Redox Systems Based on Organic Molecules

Electrochromic systems capable of switching absorption in the near-infrared (NIR) region (750-2500 nm) are attractive from the viewpoint of applications for material and life science, and thus several examples have been reported to date. In general, the development of organic-based systems is needed to reduce the environmental impact and improve biocompatibility. Although extending the switchable spectral range is crucial for the application of organic electrochromic molecules, the switching of NIR absorption based on redox interconversion is still a challenging issue regarding reversibility and durability during interconversion. To overcome this potential instability, the introduction of heteroatoms into the molecular backbone and/or π-extension could be useful strategies in terms of effective delocalization of charge and spin in the corresponding redox states. In this review, we focus on redox-active well-defined small molecules that enable ON/OFF switching of NIR absorption based on precise control of the redox states, and present recent studies on their intrinsic electrochemical and spectroscopic properties and/or structural characterization of their charged states.

Trigger inducible tertiary lymphoid structure formation using covalent organic frameworks for cancer immunotherapy

The discovery of tertiary lymphoid structures (TLS) within tumor tissues provides a promising avenue to promote the efficacy of cancer immunotherapy. Yet, the lack of effective strategies to induce TLS formation poses a substantial obstacle. Thus, the exploration of potential inducers for TLS formation is of great interest but remains challenging. Here, inspired by the mechanism of artificially cultivated pearls, a covalent organic framework (COF) is employed to induce TLS formation. Single-cell sequencing analysis reveals that this is achieved by promotion of cytokine hypersecretion, which facilitates the maturation, proliferation, and migration of T and B cells, critical for triggering TLS formation. Furthermore, the efficacy of COF-mediated phototherapy in inducing TLS formation is validated in both the MC38 and 4MOSC1 female tumor models. Notably, a strong synergistic effect between COF-mediated phototherapy and αCTLA-4 is observed, resulting in the effective eradication of both primary and distant tumors, while also inhibiting tumor recurrence.

Supramolecular Assemblies via Host-Guest Interactions for Tumor Immunotherapy

Cancer immunotherapy has emerged as one of the most promising modalities for cancer treatment providing hopes of cancer patients with the significant advantages over traditional antitumor therapy methods. Supramolecular assemblies based on host-guest interactions have been widely explored in the field of cancer immunotherapy as the delivery systems. A variety of supramolecular materials show unique features for efficient drug encapsulation, targeting delivery and release, which are favorable to activate antitumor immune responses especially through combination of different treatment strategies. In this review article, we summarize the research progresses of supramolecular assemblies via host-guest interactions for tumor immunotherapy. The construction of various drug delivery systems including hydrogels, liposomes, and polymeric nanoparticles, the drug encapsulation and delivery, as well as advantages and disadvantages are discussed. The perspectives related to future developments in this field are also described.

Nanographene-Based Polymeric Nanoparticles as Near-Infrared Emissive Neuronal Tracers

Precise tracking of axonal transport is key to deciphering neuronal functions. To achieve long-term imaging at both ultrastructural and macroscopic resolutions, it is critical to develop fluorescent transport tracers with high photostability and biocompatibility. Herein, we report the investigation of nanographene (NG)-based polymeric nanoparticles (NPs) as near-infrared (NIR)-emissive neuronal tracers. Dibenzo[a,m]dinaphtho[3,2,1-ef:1',2',3'-hi]coronene (DBDNC) was employed as the NG, which exhibited a broad NIR emission with a maximum at 711 nm inside the NPs. DBDNC-NPs displayed high photostability and low cytotoxicity, enabling live tracing of retrograde axonal transport in mouse sensory neurons cultured in microfluidic chambers. We also elucidated how DBDNC-NPs undergo retrograde axonal transport following the endolysosomal pathway. This work provides a proof of concept for NIR-emissive, NG-based neuronal tracers with potential for applications in neurobiology.

Biomedical applications of the engineered AIEgen-lipid nanostructurein vitroandin vivo

Since the concept of aggregation-induced emission (AIE) was first coined by Tang and co-workers, AIE-active luminogens (AIEgens) have drawn widespread attention among chemists and biologists due to their unique advantages such as high fluorescence efficiency, large Stokes shift, good photostability, low background noise, and high biological visualization capabilities in the aggregated state, surpassing conventional fluorophores. A growing number of AIEgens have been engineered to possess multifunctional properties, including near-infrared emission, two-photon absorption, reactive oxygen species (ROS) generation and photothermal conversion, making them suitable for deep-tissue imaging and phototherapy. AIEgens show great potential in biomedical applicationsin vitroandin vivo. However, despite the favorable photophysical stability and ROS/heat generation capability in the aggregated state, limitations including uncontrolled size, low targeting efficiency, and unexpected dispersion in physiological environments have hindered their biomedical applications. The combination of AIEgens with lipids offers a simple, promising, and widely adopted solution to these challenges. This review article provides an overview of the synthesis methods of AIEgen-lipid nanostructures and their applications in the biomedical engineering field, aiming to serve as a guideline for developing these AIEgens-lipid nanostructures with promising biological applications.

Tuning the affinity of probes with transmembrane proteins by constructing peptide-conjugated cis/trans isomers based on molecular scaffolds

For protein analysis, the current peptide-based probes rely almost on the specific recognition of the protein while neglecting the potential influence of the environment near the protein. Herein, we propose that to achieve high recognition of transmembrane protein integrin αvβ3, the interactions from the membrane substrate could be helpful. Moreover, to guarantee the additive effect of different interactions, the cis and trans isomers of peptide-based probes are distinguished. In detail, we synthesized the peptide-conjugated cis/trans isomers (cis-RTP and trans-RTP) by modifying the Arg-Gly-Asp (RGD)-targeting peptide and palmitic acid-conjugated Arg-Arg-Arg-Arg (Pal-RRRR) peptide to the two ends of the molecular scaffold-tetraphenylethene derivative. Due to the difference in spatial structure, isothermal titration calorimetry and simulation experiments demonstrated that cis-RTP can bind more stably to integrin αvβ3 than trans-RTP. As a result, cis-RTP has shown more excellent properties in inhibiting cell migration and killing cells by regulating actin and extracellular signal-regulated kinase. Unlike the existing probe design for protein, this study provides a concept of microenvironment-helpful recognition and a promising strategy of cis/trans isomers to modulate the interaction between proteins and probes.

Bornite (Cu5FeS4) nanocrystals as an ultrasmall biocompatible NIR-II contrast agent for photoacoustic imaging

In this study, we demonstrate the potential of the bornite crystal structure (Cu5FeS4) of copper iron sulfide as a second near infrared (NIR-II) photoacoustic (PA) contrast agent. Bornite exhibits comparable dose-dependent biocompatibility to copper sulfide nanoparticles in a cell viability study with HepG2 cells, while exhibiting a 10-fold increase in PA amplitude. In comparison to other benchmark contrast agents at similar mass concentrations, bornite demonstrated a 10× increase in PA amplitude compared to indocyanine green (ICG) and a 5× increase compared to gold nanorods (AuNRs). PA signal was detectable with a light pathlength greater than 5 cm in porcine tissue phantoms at bornite concentrations where in vitro cell viability was maintained. In vivo imaging of mice vasculature resulted in a 2× increase in PA amplitude compared to AuNRs. In summary, bornite is a promising NIR-II contrast agent for deep tissue PA imaging.

Reactive oxygen species-mediated organic long-persistent luminophores light up biomedicine: from two-component separated nano-systems to integrated uni-luminophores

Organic luminophores have been widely utilized in cells and in vivo fluorescence imaging but face extreme challenges, including a low signal-to-noise ratio (SNR) and even false signals, due to non-negligible background signals derived from real-time excitation lasers. To overcome these challenges, in the last decade, functionalized organic long-persistent luminophores have gained much attention. Such luminophores could not only overcome the biological toxicity of inorganic long-persistent luminescent materials (metabolic toxicity and leakage risk of inorganic heavy metals), but also continue to emit long-persistent luminescence after removing the excitation source, thus effectively improving imaging quality. More importantly, organic long-persistent luminophores have good structure tailorability for the construction of activable probes, which is favorable for biosensing. Recently, the development of reactive oxygen species (ROS)-mediated long-persistent (ROSLP) luminophores (especially organic small-molecule ROSLP luminophores) is still in the rising stage. Notably, ROSLP luminophores for in vivo imaging have experienced from two-component separated nano-systems to integrated uni-luminophores, which obtained gradually better designability and biocompatibility. In this review, we summarize the progress and challenges of organic long-persistent luminophores, focusing on their development history, long-persistent luminescence working mechanisms, and biomedical applications. We hope that these insights will help scientists further develop functionalized organic long-persistent luminophores for the biomedical field.

Large stokes shift and near-infrared fluorescent probe for bioimaging and evaluating the HClO in an rheumatoid arthritis mouse model

It is crucial to identify aberrant HClO levels in living things since they pose a major health risk and are a frequent reactive oxygen species (ROS) in living organisms. In order to detect HClO in various biological systems, we created and synthesized a near-infrared fluorescent probe with an oxime group (-C = N-OH) as a recognition unit. The probe DCMP1 has the advantages of fast response (10 min), near-infrared emission (660 nm), large Stokes shift (170 nm) and high selectivity. This probe DCMP1 not only detects endogenous HClO in living cells, but also enables further fluorescence detection of HClO in living zebrafish. More importantly, it can also be used for fluorescence imaging of HClO in an rheumatoid arthritis mouse model. This fluorescent probe DCMP1 is anticipated to be an effective tool for researching HClO.

Photoacoustic Imaging Using Polysaccharide-Porphyrin Complexes by Photoirradiation at Long Wavelengths

Photoacoustic (PA) imaging is a novel biological imaging technique with superior depth resolution compared to fluorescence imaging. The efficacy of PA imaging depends on contrast agents that possess considerable absorbance at longer wavelengths, coupled with high permeability in biological tissue and minimal fluorescence, achieved through mitigating aggregation-caused quenching (ACQ) that attenuates PA intensity. Despite the successful transfer of porphyrin 2 featuring amino moieties from polysaccharides to liposomes, most of 2 incorporated within λ-carrageenan (CGN-2 complex) remained in CGN under acidic lysosomal conditions (pH 5.0). Consequently, the CGN-2 complex exhibited a strong PA signal under 680 nm photoirradiation in Colon26 cells owing to the ACQ of 2. Moreover, the PA intensity of the CGN-2 complex was further enhanced under 780 nm photoirradiation owing to the increased absorbance at 780 nm facilitated by the redshift of the Q-band at pH 5.0.

Quaternary phosphonium AIEgens nanoparticles as innovative agents for developing latent fingerprints

Quaternary phosphonium salts, a significant category of organophosphorus compounds, have garnered substantial attention from chemists due to their wide range of applications across various research areas. These compounds are utilized in organic synthesis, catalysis, medicinal chemistry, natural materials, and coordination chemistry. Their versatility and effectiveness in these fields make them valuable tools in scientific research. Despite their extensive use in various applications, the potential of quaternary phosphonium compounds as fluorescent agents for revealing latent fingerprints (LFPs) remains largely unexplored, presenting an exciting opportunity for further research and development in forensic science. In this study, we designed molecules that combine the aggregation-induced emission (AIE) chromophore with triphenylphosphine to create a series of novel AIE amphiphiles, namely TPP1, TPP2, and TPP3. Through precise adjustment of the carbon chain length between the phenoxy group and the terminal triphenylphosphine, we were able to finely tune the nanostructures and hydrophobicity of the materials. TPP3 emerged as the optimal candidate, possessing the ideal particle size and hydrophobicity to effectively bind to LFPs, thus enabling efficient fingerprint visualization with enhanced fluorescence upon aggregation. Our findings introduce an innovative approach to fingerprint visualization, offering high selectivity, superior imaging of level 3 structures, and long-term effectiveness (up to 30 days). Additionally, TPP3's outstanding performance in imaging level 3 structures of LFPs is beneficial for analyzing incomplete LFPs and identifying individuals. By significantly improving the detection and analysis of LFPs, this approach ensures more accurate and reliable identification, making it invaluable for forensic investigations and security measures. The adaptability of these compounds to various fingerprint surfaces highlights their potential in diverse practical applications, enhancing their utility in both forensic science and security fields. This versatility allows for precise fingerprint visualization across different scenarios, making them a critical tool for advancing biometric and security technologies.

Multimodal biosensing systems based on metal nanoparticles

Biosensors are currently among the most commonly used devices for analysing biomarkers and play an important role in environmental detection, food safety, and disease diagnosis. Researchers have developed multimodal biosensors instead of single-modal biosensors to meet increasing sensitivity, accuracy, and stability requirements. Metal nanoparticles (MNPs) are beneficial for preparing core probes for multimodal biosensors because of their excellent physical and chemical properties, such as easy regulation and modification, and because they can integrate diverse sensing strategies. This review mainly summarizes the excellent physicochemical properties of MNPs applied as biosensing probes and the principles of commonly used MNP-based multimodal sensing strategies. Recent applications and possible improvements of multimodal biosensors based on MNPs are also described, among which on-site inspection and sensitive detection are particularly important. The current challenges and prospects for multimodal biosensors based on MNPs may provide readers with a new perspective on this field.

Rationally Designed Benzobisthiadiazole-Based Covalent Organic Framework for High-Performance NIR-II Fluorescence Imaging-Guided Photodynamic Therapy

Although being applied as photosensitizers for photodynamic therapy, covalent organic frameworks (COFs) fail the precise fluorescence imaging in vivo and phototherapy in deep-tissue, due to short excitation/emission wavelengths. Herein, this work proposes the first example of NIR-II emissive and benzobisthiadiazole-based COF-980. Comparing to its ligands, the structure of COF-980 can more efficiently reducing the energy gap (ΔES1-T1) between the excited state and the triplet state to enhance photodynamic therapy efficiency. Importantly, COF-980 demonstrates high photostability, good anti-diffusion property, superior reactive oxygen species (ROS) generation efficiency, promising imaging ability, and ROS production in deep tissue (≈8 mm). Surprisingly, COF-980 combined with laser irradiation could trigger larger amount of intracellular ROS to high efficiently induce cancer cell death. Notably, COF-980 NPs precisely enable PDT guided by NIR-II fluorescence imaging that effectively inhibit the 4T1 tumor growth with negligible adverse effects. This study provides a universal approach to developing long-wavelength emissive COFs and exploits its applications for biomedicine.

Julolidinyl aza-BODIPYs as NIR-II fluorophores for the bioimaging of nanocarriers

The aggregation-caused quenching (ACQ) rationale has been employed to improve the fluorescence imaging accuracy of nanocarriers by precluding free probe-derived interferences. However, its usefulness is undermined by limited penetration and low spatiotemporal resolution of NIR-I (700-900 nm) bioimaging owing to absorption and diffraction by biological tissues and tissue-derived autofluorescence. This study aimed to develop ACQ-based NIR-II (1000-1700 nm) probes to further improve the imaging resolution and accuracy. The strategy employed is to install highly planar and electron-rich julolidine into the 3,5-position of aza-BODIPY based on the larger substituent effects. The newly developed probes displayed remarkable photophysical properties, with intense absorption centered at approximately 850 nm and bright emission in the 950-1300 nm region. Compared with the NIR-I counterpart P2, the NIR-II probes demonstrated superior water sensitivity and quenching stability. ACQ1 and ACQ6 exhibited more promising ACQ effects with absolute fluorescence quenching at water fractions above 40% and higher quenching stability with less than 2.0% fluorescence reillumination in plasma after 24 h of incubation. Theoretical calculations verified that molecular planarity is more important than hydrophobicity for ACQ properties. Additionally, in vivo and ex vivo reillumination studies revealed less than 2.5% signal interference from prequenched ACQ1, in contrast to 15% for P2.

Active Hydrogen Free, Z-Isomer Selective Isatin Derived "Turn on" Fluorescent Dual Anions Sensor

An efficient and anions fluorescence "on-off" sensor of 1-(prop-2-yn-1-yl)-3-(quinolin-3-ylimino)indolin-2-one (PQI) has been developed for the selective sensing of dual anions of F- and NO3- ions in aqueous medium. Active hydrogen and Lewis acidic binding sites free, Z- isomer of isatin based π-conjugated quinoline exhibited excellent sensing activity against F- and NO3- ions in UV light. The fluorescence turns on the process accomplished via the PET "on-off" mechanism. The interaction between probe molecule and anions is thought to be a non-covalent interaction of the low electron density covalently bonded N-methylene moiety of propargyl isatin (-N-CH2-) of probe molecule with F- ion and the terminal acidic proton of propargyl group of isatin (-C≡C-H) with NO3- ions. The modes of anions binding with PQI and plausible mechanisms are proposed by 1H and 13C NMR titrations. The selectivity of anions sensing may be offered by the bucked structure of the Z-isomer. The calculated association constant values for PQI and F- and NO3- are ions 2.5 × 104 M-1 and 2.2 × 103 M-1, respectively, indicating strong binding interaction between the PQI and anions. The association nature of anions and probes was analyzed by a Jobs plot and the finding indicates both F- and NO3- ions are in 1:1 complexation with PQI. The limit of detection (LOD) of the probe with F- and NO3- ions is calculated and is to be 6.91 × 10-7 M and 9.93 × 10-7 M, respectively. The proposed PQI fluorophore possesses a low limit of detection (LOD) for both F- and NO3- ions which is within the WHO prescribed detection limit.

Coumarin-Phosphazenes: Enhanced Photophysical Properties from Hybrid Materials

Phosphazenes have drawn a great deal of interest over the past 20 years as a potentially useful building block for the fabrication of fluorescent materials. The main objective of this work is to explore novel derivatives produced by coumarins, a class of chemicals well-known for their photophysical importance, and cyclophosphazenes. UV absorbance, fluorescence emission, quantum yield, and lifetime measurements were conducted to comprehend the optical properties. Furthermore, single-crystal X-ray analysis and theoretical calculations were carried out to confirm the structure of the molecule. The obtained findings collectively confirm the commendable optical properties exhibited by the studied compounds. Moreover, a detailed study of the crystal packing arrangement of DPP-Et-Kum-Et compound crystallized in the P21/n monoclinic space group revealed the presence of stacking interactions between the nonplanar conjugated benzene rings of the coumarins and the rigid diphenyl groups attached to the phosphazene ring. The crystal structure of the DPP-Kum-Me-Me compound is mainly based on classical C-H···O intermolecular hydrogen bonding interactions with an average distance of 2.52 Å. Importantly, the calculated absorption spectra of the compounds are in close agreement with the experimental data, further supporting their interesting electronic properties. Given that the DPP-Et-Kum-Et and DPP-Kum-Et compounds have the theoretically lowest band gaps (4.31 and 4.30 eV, respectively), the activation energies of these compounds were determined by an impedance analyzer using dc conductance values measured at different temperatures. The calculated activation energies for DPP-Et-Kum-Et and DPP-Kum-Et are 104.49 and 100.92 meV, respectively. The results demonstrate that both theoretical and experimental calculations are in agreement with each other and that the DPP-Kum-Et compound has the lowest conductivity.

Dihydroxanthene-based monoamine oxidase A-activated photosensitizers for photodynamic/photothermal therapy of tumors

Small molecule photosensitizers for combined in vivo tailored cancer diagnostics and photodynamic/photothermal therapy are desperately needed. Monoamine oxidase A (MAO-A)-activated therapeutic and diagnostic compounds provide great selectivity because MAO-A can be employed as a biomarker for associated Tumors. In order to screen photosensitizers with photodynamic therapeutic potential, we have created a range of near-infrared fluorescent molecules in this work by combining dihydroxanthene parent with various heterocyclic fluorescent dyes. The NIR fluorescent diagnostic probe, DHMQ, was created by combining the screened fluorescent dye matrices with the propylamino group, which is the recognition moiety of MAO-A, based on the oxidative deamination mechanism of the enzyme. This probe has a low toxicity level and can identify MAO-A precisely. It has the ability to use fluorescence imaging on mice and cells to track MAO-A activity in real-time. It has strong phototoxicity and can produce singlet oxygen when exposed to laser light. The temperature used in photothermal imaging can get up to 50 °C, which can harm tumor cells permanently and have a positive phototherapeutic impact on tumors grown from SH-SY5Y xenograft mice. The concept of using MAO-A effectively in diseases is expanded by the MAO-A-activated diagnostic-integrated photosensitizers, which offer a new platform for in vivo cancer diagnostics and targeted anticancer treatment.

Real-Time Monitoring of Tyrosine Hydroxylase Activity with a Ratiometric Fluorescent Probe

Parkinson's disease (PD) represents the second most widespread neurodegenerative disease, and early monitoring and diagnosis are urgent at present. Tyrosine hydroxylase (TH) is a key enzyme for producing dopamine, the levels of which can serve as an indicator for assessing the severity and progression of PD. This renders the specific detection and visualization of TH a strategically vital way to meet the above demands. However, a fluorescent probe for TH monitoring is still missing. Herein, three rationally designed wash-free ratiometric fluorescent probes were proposed. Among them, TH-1 exhibited ideal photophysical properties and specific dual-channel bioimaging of TH activity in SH-SY5Y nerve cells. Moreover, the probe allowed for in vivo imaging of TH activity in zebrafish brain and living striatal slices of mice. Overall, the ratiometric fluorescent probe TH-1 could serve as a potential tool for real-time monitoring of PD in complex biosystems.

Nanoscale engineering of gold nanostars for enhanced photoacoustic imaging

Photoacoustic (PA) imaging is a diagnostic modality that combines the high contrast resolution of optical imaging with the high tissue penetration of ultrasound. While certain endogenous chromophores can be visualized via PA imaging, many diagnostic assessments require the administration of external probes. Anisotropic gold nanoparticles are particularly valued as contrast agents, since they produce strong PA signals and do not photobleach. However, the synthesis of anisotropic nanoparticles typically requires cytotoxic reagents, which can hinder their biological application. In this work, we developed new PA probes based on nanostar cores and polymeric shells. These AuNS were obtained through one-pot synthesis with biocompatible Good's buffers, and were subsequently functionalized with polyethylene glycol, chitosan or melanin, three coatings widely used in (pre)clinical research. Notably, the structural features of the nanostar cores strongly affected the PA signal. For instance, despite displaying similar sizes (i.e. 45 nm), AuNS obtained with MOPS buffer generated between 2 and 3-fold greater signal intensities in the region between 700 and 800 nm than nanostars obtained with HEPES and EPPS buffers, and up to 25-fold stronger signals than spherical gold nanoparticles. A point source analytical model demonstrated that AuNS synthesized with MOPS displayed greater absorption coefficients than the other particles, corroborating the stronger PA responses. Furthermore, the AuNS shell not only improved the biocompatibility of the nanoconstructs but also affected their performance, with melanin coating enhancing the signal more than 4-fold, due to its own PA capacity, as demonstrated by both in vitro and ex vivo imaging. Taken together, these results highlight the strengths of gold nanoconstructs as PA probes and offer insights into the design rules for the nanoengineering of new nanodiagnostic agents.

Designing a Mitochondria-Targeted Theranostic Cyclometalated Iridium(III) Complex: Overcoming Cisplatin Resistance and Inhibiting Tumor Metastasis through Necroptosis and Immune Response

To develop a potential theranostic metal agent to reverse the resistance of cancer cells to cisplatin and effectively inhibit tumor growth and metastasis, we proposed to design a cyclometalated iridium (Ir) complex based on the properties of the tumor environment (TME). To the end, we designed and synthesized a series of Ir(III) 2-hydroxy-1-naphthaldehyde thiosemicarbazone complexes by modifying the hydrogen atom(s) of the N-3 position of 2-hydroxy-1-naphthaldehyde thiosemicarbazone compounds and the structure of cyclometalated Ir(III) dimers and then investigated their structure-activity and structure-fluorescence relationships to obtain an Ir(III) complex (Ir5) with remarkable fluorescence and cytotoxicity to cancer cells. Ir5 not only possesses mitochondria-targeted properties but also overcomes cisplatin resistance and effectively inhibits tumor growth and metastasis in vivo. Besides, we confirmed the anticancer mechanisms of Ir5 acting on different components in the TME: directly killing liver cancer cells by inducing necroptosis and activating the necroptosis-related immune response.

Non-destructive real-time monitoring and investigation of the self-assembly process using fluorescent probes

Self-assembly has been considered as a strategy to construct superstructures with specific functions, which has been widely used in many different fields, such as bionics, catalysis, and pharmacology. A detailed and in-depth analysis of the self-assembly mechanism is beneficial for directionally and accurately regulating the self-assembly process of substances. Fluorescent probes exhibit unique advantages of sensitivity, non-destructiveness, and real-time self-assembly tracking, compared with traditional methods. In this work, the design principle of fluorescent probes with different functions and their applications for the detection of thermodynamic and kinetic parameters during the self-assembly process were systematically reviewed. Their efficiency, limitations and advantages are also discussed. Furthermore, the promising perspectives of fluorescent probes for investigating the self-assembly process are also discussed and suggested.

Ultrabright Green-Emissive Nanodots for Precise Biological Visualization

Developing general methods to fabricate water-dispersible and biocompatible fluorescent probes will promote different biological visualization applications. Herein, we report a metal-facilitated method to fabricate ultrabright green-emissive nanodots via the one-step solvothermal treatment of rose bengal, ethanol, and various metal ions. These metal-doped nanodots show good water dispersity, ultrahigh photoluminescence quantum yields (PLQYs) (e.g., the PLQY of Fe-doped nanodots (FeNDs) was ∼97%), and low phototoxicity. Owing to the coordination effect of metal ions, the FeNDs realize glutathione detection with outstanding properties. Benefiting from the high endoplasmic reticulum (ER) affinity of the chloride group, the FeNDs can act as an ER tracker with long ER imaging capacity (FeNDs: >24 h; commercial ER tracker: ∼1 h) and superb photostability and can achieve tissue visualization in living Caenorhabditis elegans. The metal-doped nanodots represent a general nanodot preparation method and may shed new light on diverse biological visualization uses.

In situ peptide assemblies for bacterial infection imaging and treatment

Bacterial infections, especially antibiotic-resistant ones, remain a major threat to human health. Advances in nanotechnology have led to the development of numerous antimicrobial nanomaterials. Among them, in situ peptide assemblies, formed by biomarker-triggered self-assembly of peptide-based building blocks, have received increasing attention due to their unique merits of good spatiotemporal controllability and excellent disease accumulation and retention. In recent years, a variety of "turn on" imaging probes and activatable antibacterial agents based on in situ peptide assemblies have been developed, providing promising alternatives for the treatment and diagnosis of bacterial infections. In this review, we introduce representative design strategies for in situ peptide assemblies and highlight the bacterial infection imaging and treatment applications of these supramolecular materials. Besides, current challenges in this field are proposed.

Activatable organic probes for in situ imaging of biomolecules

Biomolecules are fundamental for various chemical and biological processes of living organisms. High-resolution in situ imaging of the dynamics and local distribution of biomolecules may facilitate better interpretation of diverse complex cell events in the biomedicine field. In different advanced imaging tools, fluorescence imaging-based activatable organic probes can be noninvasively and effortlessly internalized into cells and can be easily modified, which is essential for the in situ imaging of targets in living organisms. We here briefly summarize the existing general design strategies of activatable organic probes for retaining the fluorescence signal inside cells. We particularly describe the bioapplication of these probes for the in situ bioimaging. This review is expected to promote the development of new molecular tools for extending the application of these in situ imaging strategies to other biomolecules.

AIE-based ratiometric fluorescent probe for mercury ion, medium-dependent fluorescence color change and optimized sensitivity in solid state

A new AIE-based luminogen TPES, as a ratiometric fluorescence probe for mercury(II) was readily synthesized. The probe combined the advantages of the outstanding specificity of Hg2+-triggered deprotection reaction of thioketal and the brilliant emission of AIEgens in aggregated state. Once encountered aqueous Hg2+, fluorescent color of TPES in THF-H2O (fw = 98%) altered from blue to green rapidly, while other metal cations gave no interference to the probe. And the mechanism of this chemosensor was carefully verified by 1H NMR analysis, FTIR and MS spectra. As expected, TPES exhibits excellent selectivity and sensitivity towards Hg2+ in the solid state. When using filter paper as the solid medium, the fabricated test strips could signify Hg2+ ions with the LOD as 1 × 10-5 M (Hg2+ in aqueous solution), accompanied with a distinct emitting altered from blue to green. Furthermore, by changing the medium from filter paper to silica gel plate, a more significant fluorescence alteration from blue to yellow was achieved, and the LOD was further optimized to 1 × 10-6 M as discerned by naked-eye.

A Class of Activatable NIR-II Photoacoustic Dyes for High-Contrast Bioimaging

Photoacoustic (PA) imaging is emerging as one of the important non-invasive imaging techniques in biomedical research. Small molecule- second near-infrared window (NIR-II) PA dyes combined with imaging data can provide comprehensive and in-depth in vivo physiological and pathological information. However, the NIR-II PA dyes usually exhibit "always-on" properties due to the lack of a readily optically tunable group, which hinders the further applications in vivo. Herein, a novel class of dyes GX have been designed and synthesized as an activatable NIR-II PA platform, in which the absorption/emission wavelength of GX-5 extends up to 1082/1360 nm. Importantly, the GX dyes have a strong tissue penetration depth and high-resolution for the mouse vasculature structures in NIR-II PA 3D imaging and high signal-to-noise ratio in NIR-II fluorescence (FL) imaging. Furthermore, to demonstrate the applicability of GX dyes, the first NIR-II PA probe GX-5-CO activated by carbon monoxide (CO) was engineered and employed to reveal the enhancement of the CO levels in the hypertensive mice by high-contrast NIR-II PA and FL imaging. We expect that many derivatives of GX dyes will be developed to afford versatile NIR-II PA platforms for designing a wide variety activatable NIR-II PA probes as biomedical tools.

Enabling nonconjugated polyesters emit full-spectrum fluorescence from blue to near-infrared

Near-infrared luminophores have many advantages in advanced applications, especially for structures without π-conjugation aromatic rings. However, the fabrication of red clusteroluminogens from nonconjugated polymers is still a big challenge, let alone the near-infrared clusteroluminogens. Here, we develop nonconjugated luminophores with full-spectrum from blue to near-infrared light (470 ~ 780 nm), based on color phenomenon of nonconjugated polyesters synthesized from the amine-initiated copolymerization of epoxides and cyclic anhydrides. We reveal that amines act as initiators attached to polymer chain ends. The formation of various amine-ester complexes in polyesters induces red to near-infrared light, conceptually, amine-ester complexed clusteroluminescence via intra/inter-chain charge transfer. Significantly, emission colors can be easily tuned by the contents and types of amines, microstructures of polyesters, and their concentration. This work provides a low-cost, scalable platform and strategy for the production of high-efficiency, multicolor luminescent materials.

Superoxide Anion-Mediated Afterglow Mechanism-Based Water-Soluble Zwitterion Dye Achieving Renal-Failure Mice Detection

Afterglow materials-based biological imaging has promising application prospects, due to negligible background. However, currently available afterglow materials mainly include inorganic materials as well as some organic nanoparticles, which are difficult to translate to the clinic, resulting from non-negligible metabolic toxicity and even leakage risk of inorganic heavy metals. Although building small organic molecules could solve such obstacles, organic small molecules with afterglow ability are extremely scarce, especially with a sufficient renal metabolic capacity. To address these issues, herein, we designed water-soluble zwitterion Cy5-NF with renal metabolic capacity and afterglow luminescence, which relied on an intramolecular cascade reaction between superoxide anion (O2•-, instead of 1O2) and Cy5-NF to release afterglow luminescence. Of note, compared with different reference contrast agents, zwitterion Cy5-NF not only had excellent afterglow properties but also had a rapid renal metabolism rate (half-life period, t1/2, around 10 min) and good biocompatibility. Unlike prior afterglow nanosystems possessing a large size, for the first time, zwitterion Cy5-NF has achieved the construction of water-soluble renal metabolic afterglow contrast agents, which showed higher sensitivity and signal-to-background ratio in afterglow imaging than fluorescence imaging for the kidney. Moreover, zwitterion Cy5-NF had a longer kidney retention time in renal-failure mice (t1/2 more than 15 min). More importantly, zwitterion Cy5-NF can be metabolized very quickly even in severe renal-failure mice (t1/2 around 25-30 min), which greatly improved biosecurity. Therefore, we are optimistic that the O2•--mediated afterglow mechanism-based water-soluble zwitterion Cy5-NF is very promising for clinical application, especially rapid detection of kidney failure.

Functional chromophores synthesized via multicomponent Reactions: A review on their use as cell-imaging probes

This review aims to provide a comprehensive overview of recent advancements and applications of fluorescence imaging probes synthesized via MCRs (multicomponent reactions). These probes, also known as functional chromophores, belong to a currently investigated class of fluorophores that are presently being successfully applied in bioimaging experiments, especially in various living cell lineages. We describe some of the MCRs that have been employed in the synthesis of these probes and explore their applications in biological imaging, with an emphasis on cellular imaging. The review also discusses the challenges and future perspectives in the field, particularly considering the potential impact of MCR-based fluorescence imaging probes on advancing this field of research in the coming years. Considering that this area of research is relatively new and nearly a decade has passed since the first publication, this review also provides a historical perspective on this class of fluorophores, highlighting the pioneering works published between 2011 and 2016.

Functionalized Fluorescent Organic Nanoparticles Based AIE Enabling Effectively Targeting Cancer Cell Imaging

We report a fluorescent dye TM by incorporating the tetraphenylethylene (TPE) and cholesterol components into perylene bisimides (PBI) derivative. Fluorescence emission spectrum shows that the dye has stable red emission and aggregation-induced emission (AIE) characteristics. The incorporation of cholesterol components triggers TM to show induced chirality through supramolecular self-assembly. The cRGD-functionalized nanoparticles were prepared by encapsulating fluorescent dyes with amphiphilic polymer matrix. The functionalized fluorescent organic nanoparticles exhibit excellent biocompatibility, large Stokes' shift and good photostability, which make them effective fluorescent probes for targeting cancer cells with high fluorescence contrast.

The impact of aggregation of AIE and ACQ moiety-integrating material on the excited state dynamics

The investigation of the properties of aggregate materials is highly interesting because the process of aggregation can result in the disappearance of original properties and the emergence of new ones. Here, a novel fluorescent material (TPEIP), which synergistically combines aggregation-induced emission (AIE) and aggregation caused quenching (ACQ) moieties, was first synthesized by the cyclization reaction of 2,3-diamino-phenazine with 4-tetraphenylenthenealdehyde. We controlled the degree of aggregation of TPEIP to shed light on the impact of the aggregation on the excited state dynamics. TPEIP aggregation realized control over the Intersystem Crossing (ISC) rates and, in turn, the suppression of triplet excited states in MeOH, EtOH or via the simple addition of water to TPEIP solutions in DMSO. From global target analysis, the time scale was 966.2 ps for ISC for TPEIP in DMSO, but it was 860 ps in the case of TPEIP solutions featuring 5% water. The dynamics of TPEIP excited states undergo significant changes as the degree of aggregation increases. Notably, the lifetime of singlet excited states decreases, and there was a gradual diminishment in triplet states.

Polydopamine-Based Nanoprobes Application in Optical Biosensing

Polydopamine (PDA), the synthetic counterpart of melanin, is a widely investigated bio-inspired material for its chemical and photophysical properties, and in the last few years, bio-application of PDA and PDA-based materials have had a dramatic increase. In this review, we described PDA application in optical biosensing, exploring its multiple roles as a nanomaterial. In optical sensing, PDA can not only be used for its intrinsic fluorescent and photoacoustic properties as a probe: in some cases, a sample optical signal can be derived by melanin generation in situ or it can be enhanced in another material thanks to PDA modification. The various possibilities of PDA use coupled with its biocompatibility will indeed widen even more its application in optical bioimaging.

Multifunctional polysaccharide nanoprobes for biological imaging

Imaging and tracking biological targets or processes play an important role in revealing molecular mechanisms and disease states. Bioimaging via optical, nuclear, or magnetic resonance techniques enables high resolution, high sensitivity, and high depth imaging from the whole animal down to single cells via advanced functional nanoprobes. To overcome the limitations of single-modality imaging, multimodality nanoprobes have been engineered with a variety of imaging modalities and functionalities. Polysaccharides are sugar-containing bioactive polymers with superior biocompatibility, biodegradability, and solubility. The combination of polysaccharides with single or multiple contrast agents facilitates the development of novel nanoprobes with enhanced functions for biological imaging. Nanoprobes constructed with clinically applicable polysaccharides and contrast agents hold great potential for clinical translations. This review briefly introduces the basics of different imaging modalities and polysaccharides, then summarizes the recent progress of polysaccharide-based nanoprobes for biological imaging in various diseases, emphasizing bioimaging with optical, nuclear, and magnetic resonance techniques. The current issues and future directions regarding the development and applications of polysaccharide nanoprobes are further discussed.

Orderly Self-Assembly of Organic Fluorophores for Sensing and Imaging

Fluorescence imaging utilizing traditional organic fluorophores is extensively applied in both cellular and in vivo studies. However, it faces significant obstacles, such as low signal-to-background ratio (SBR) and spurious positive/negative signals, primarily due to the facile diffusion of these fluorophores. To cope with this challenge, orderly self-assembled functionalized organic fluorophores have gained significant attention in the past decades. These fluorophores can create nanoaggregates via a well-ordered self-assembly process, thus prolonging their residency time within cells and in vivo settings. The development of self-assembled-based fluorophores is an emerging field, and as such, in this review, we present a summary of the progress and challenges of self-assembly fluorophores, focusing on their development history, self-assembly mechanisms, and biomedical applications. We hope that the insights provided herein will assist scientists in further developing functionalized organic fluorophores for in situ imaging, sensing, and therapy.

Activation of Pyroptosis Using AIEgen-Based sp2 Carbon-Linked Covalent Organic Frameworks

Covalent organic frameworks (COFs) have emerged as a promising class of crystalline porous materials for cancer phototherapy, due to their exceptional characteristics, including light absorption, biocompatibility, and photostability. However, the aggregation-caused quenching effect and apoptosis resistance often limit their therapeutic efficacy. Herein, we demonstrated for the first time that linking luminogens with aggregation-induced emission effect (AIEgens) into COF networks via vinyl linkages was an effective strategy to construct nonmetallic pyroptosis inducers for boosting antitumor immunity. Mechanistic investigations revealed that the formation of the vinyl linkage in the AIE COF endowed it with not only high brightness but also strong light absorption ability, long lifetime, and high quantum yield to favor the generation of reactive oxygen species for eliciting pyroptosis. In addition, the synergized system of the AIE COF and αPD-1 not only effectively eradicated primary and distant tumors but also inhibited tumor recurrence and metastasis in a bilateral 4T1 tumor model.

Precise Planar-Twisted Molecular Engineering to Construct Semiconducting Polymers with Balanced Absorption and Quantum Yield for Efficient Phototheranostics

Semiconducting polymers (SPs) have shown great feasibility as candidates for near-infrared-II (NIR-II) fluorescence imaging-navigated photothermal therapy due to their strong light-harvesting ability and flexible tunability. However, the fluorescence signal of traditional SPs tends to quench in their aggregate states owing to the strong π-π stacking, which can lead to the radiative decay pathway shutting down. To address this issue, aggregation-induced emission effect has been used as a rational tactic to boost the aggregate-state fluorescence of NIR-II emitters. In this contribution, we developed a precise molecular engineering tactic based on the block copolymerizations that integrate planar and twisted segments into one conjugated polymer backbone, providing great flexibility in tuning the photophysical properties and photothermal conversion capacity of SPs. Two monomers featured with twisted and planar architectures, respectively, were tactfully incorporated via a ternary copolymerization approach to produce a series of new SPs. The optimal copolymer (SP2) synchronously shows desirable absorption ability and good NIR-II quantum yield on the premise of maintaining typical aggregation-induced emission characteristics, resulting in balanced NIR-II fluorescence brightness and photothermal property. Water-dispersible nanoparticles fabricated from the optimal SP2 show efficient photothermal therapeutic effects both in vitro and in vivo. The in vivo investigation reveals the distinguished NIR-II fluorescence imaging performance of SP2 nanoparticles and their photothermal ablation toward tumor with prominent tumor accumulation ability and excellent biocompatibility.

Manipulating fluorescence by photo-switched spin-state conversions in an iron(ii)-based SCO-MOF

Manipulating fluorescence by photo-switched spin-state conversions is an attractive prospect for applications in smart magneto-optical materials and devices. The challenge is how to modulate the energy transfer paths of the singlet excited state by light-induced spin-state conversions. In this work, a spin crossover (SCO) Fe^II-based fluorophore was embedded into a metal-organic framework (MOF) to tune the energy transfer paths. Compound 1 {Fe(TPA-diPy)[Ag(CN)₂]₂}·2EtOH (1) has an interpenetrated Hofmann-type structure, wherein the Fe^II ion is coordinated by a bidentate fluorophore ligand (TPA-diPy) and four cyanide nitrogen atoms and acts as the fluorescent-SCO unit. Magnetic susceptibility measurements revealed that 1 underwent an incomplete and gradual spin crossover with T_1/2 = 161 K. Photomagnetic studies confirmed photo-induced spin state conversions between the low-spin (LS) and high-spin (HS) states, where the irradiation of 532 and 808 nm laser lights converted the LS and HS states to the HS and LS states, respectively. Variable-temperature fluorescence spectra study revealed an anomalous decrease in emission intensity upon the HS → LS transition, confirming the synergetic coupling between the fluorophore and SCO units. Alternating irradiation of 532 and 808 nm laser lights resulted in reversible fluorescence intensity changes, confirming spin state-controlled fluorescence in the SCO-MOF. Photo-monitored structural analyses and UV-vis spectroscopic studies demonstrated that the photo-induced spin state conversions changed energy transfer paths from the TPA fluorophore to the metal-centered charge transfer bands, ultimately leading to the switching of fluorescence intensities. This work represents a new prototype compound showing bidirectional photo-switched fluorescence by manipulating the spin states of iron(ii).

Recent progress in the development of fluorescent probes for imaging pathological oxidative stress

Oxidative stress is closely related to the physiopathology of numerous diseases. Reactive oxygen species (ROS), reactive nitrogen species (RNS), and reactive sulfur species (RSS) are direct participants and important biomarkers of oxidative stress. A comprehensive understanding of their changes can help us evaluate disease pathogenesis and progression and facilitate early diagnosis and drug development. In recent years, fluorescent probes have been developed for real-time monitoring of ROS, RNS and RSS levels in vitro and in vivo. In this review, conventional design strategies of fluorescent probes for ROS, RNS, and RSS detection are discussed from three aspects: fluorophores, linkers, and recognition groups. We introduce representative fluorescent probes for ROS, RNS, and RSS detection in cells, physiological/pathological processes (e.g., Inflammation, Drug Induced Organ Injury and Ischemia/Reperfusion Injury etc.), and specific diseases (e.g., neurodegenerative diseases, epilepsy, depression, diabetes and cancer, etc.). We then highlight the achievements, current challenges, and prospects for fluorescent probes in the pathophysiology of oxidative stress-related diseases.

Duplex Responsive Nanoplatform with Cascade Targeting for Atherosclerosis Photoacoustic Diagnosis and Multichannel Combination Therapy

The culprits of atherosclerosis are endothelial damage, local disorders of lipid metabolism, and progressive inflammation. Early atherosclerosis is typically difficult to diagnose in time due to the lack of obvious symptoms, thus missing the best period of treatment. In this work, a π-conjugated polymer (PMeTPP-MBT) based on 3,6-bis(4-methylthiophen-2-yl)-2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione is designed as a novel photoacoustic contrast agent. On this basis, an intelligent responsive theranostic nanoplatform (PA/ASePSD) combining astaxanthin and SS-31 peptide and loading with PMeTPP-MBT is developed. The high affinity between the dextran shell with the broken endothelial surface VCAM-1 and CD44 confers active targeting of PA/ASePSD to atherosclerotic lesions. High levels of ROS in the acidic plaque microenvironment act as an intelligent cascade switch to achieve controlled release of astaxanthin, SS-31 peptide, and PMeTPP-MBT for non-invasive photoacoustic diagnosis, as well as plaque inhibition mediated by anti-inflammation and multichannel regulation (including ABCA1, ABCG1, CD36, and LOX-1) of lipid metabolism. Both in vitro and in vivo evaluations confirm the impressive anti-atherosclerotic capability and the accurate photoacoustic diagnosis of PA/ASePSD nanoparticles, thus promising a candidate for early-stage atherosclerosis theranostics.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Comprehensive Insights into Medicinal Research on Imidazole-Based Supramolecular Complexes

The electron-rich five-membered aromatic aza-heterocyclic imidazole, which contains two nitrogen atoms, is an important functional fragment widely present in a large number of biomolecules and medicinal drugs; its unique structure is beneficial to easily bind with various inorganic or organic ions and molecules through noncovalent interactions to form a variety of supramolecular complexes with broad medicinal potential, which is being paid an increasing amount of attention regarding more and more contributions to imidazole-based supramolecular complexes for possible medicinal application. This work gives systematical and comprehensive insights into medicinal research on imidazole-based supramolecular complexes, including anticancer, antibacterial, antifungal, antiparasitic, antidiabetic, antihypertensive, and anti-inflammatory aspects as well as ion receptors, imaging agents, and pathologic probes. The new trend of the foreseeable research in the near future toward imidazole-based supramolecular medicinal chemistry is also prospected. It is hoped that this work provides beneficial help for the rational design of imidazole-based drug molecules and supramolecular medicinal agents and more effective diagnostic agents and pathological probes.

Biomimetic-compartmented nanoprobe for in-situ imaging of iron storage and release from ferritin in cells

Ferritin plays an important role in regulating the homeostasis of iron in cells by storing/releasing iron. Current methods usually explored the determination of iron content, but in-situ imaging of the iron storage/release from ferritin in cells cannot be achieved. Hence, an engineered self-assembled biomimetic-compartmented nanoprobe (APO@CDs) has been constructed. The protein shell of APO (apoferritin) acted as ion channel module to control iron ions entering/exiting ferritin cavity; the inner core of CDs (carbon dots) acted as signal module for iron ions response. Compared with CDs, the response sensitivity and specificity to iron ions (Fe3⁺) have been improved by using APO@CDs, and the cytotoxicity was significantly reduced. Additionally, compared with cells containing APO@CDs alone, the normalized fluorescence gray value of Fe³⁺-treated cells was significantly decreased (0.275), indicating that Fe³⁺ has effectively entered the ferritin. Furtherly, that of Fe³⁺-treated cells incubated with deferoxamine (DFO) was significantly enhanced (0.712), showing that Fe³⁺ was released from ferritin under the mediation of DFO. The results demonstrate that APO@CDs can be successfully applied to in-situ imaging of iron storage/release from ferritin in cells, providing a potential platform for the in-situ dynamic study of the iron storage/release in biomedical field.

Photoacoustic/fluorescence dual-modality cyanine-based probe for real-time imaging of endogenous cysteine and in situ diagnosis of cervical cancer in vivo

Cysteine (Cys), one of cellular biothiols in the organism, is associated with many diseases, such as Parkinson's disease, Alzheimer's disease, liver damage, rheumatoid arthritis, and cancer. However, activatable fluorescence/photoacoustic (FL/PA) probes for non-invasive, real-time, and deep imaging of Cys in vivo are still lacking, and this hinders the diagnosis of Cys-related diseases. Herein, we designed and synthesized a novel activated FL/PA dual-modality cyanine-base probe (FP₇₀₀) for real-time detection of Cys. The probe FP₇₀₀ was established with near-infrared emissive dye cyanin as the fluorophore, linking with 2, 4-dinitrobenzenesulfonyl group as the recognition moiety for Cys. Using the FP₇₀₀, we found that the FP₇₀₀ exhibited intensive "turn-on" FL/PA signals under the excitation of 700 nm, which realized noninvasive in vivo detection of exogenous Cys. Significantly, FP₇₀₀ accurately detected endogenous Cys though the FL/PA dual-mode imaging technology in tumor-bearing mice and obtain 3D PA diagnostic images with deep penetration depth and spatial resolution. Thus, the new dual-modality probe FP₇₀₀ has advantage of high potential for deep tumor diagnosis of Cys in vivo, which may provide a new approach for the detection of cervical cancer and identification of its potential therapeutic targets.