Construction of a Soft Antifouling PAA/PSBMA Hydrogel Coating with High Toughness and Low Swelling through the Dynamic Coordination Bonding Provided by Al(OH)3 Nanoparticles

Marine biofouling, resulting from the adhesion of marine organisms to ship surfaces, has long been a significant issue in the maritime industry. In this paper, we focused on utilizing soft and hydrophilic hydrogels as a potential approach for antifouling (AF) coatings. Acrylic acid (AA) with a polyelectrolyte effect and N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine (SBMA) with an antipolyelectrolyte effect were selected as monomers. By adjusting the monomer ratio, we were able to create hydrogel coatings that exhibited low swelling ratio in both fresh water and seawater. The Al(OH)3 nanoparticle, as a physical cross-linker, provided better mechanical properties (higher tensile strength and larger elongation at break) than the chemical cross-linker through the dynamic coordination bonds and plentiful hydrogen bonds. Additionally, we incorporated trehalose into the hydrogel, enabling the repair of the hydrogel network through covalent-like hydrogen bonding. The zwitterion compound SBMA endowed the hydrogel with excellent AF performance. It was found that the highest SBMA content did not lead to the best antibacterial performance, as bacterial adhesion quantity was also influenced by the charge of the hydrogel. The hydrogel with appropriate SBMA content being close to electrical neutrality exhibits the strongest zwitterionic property of PSBMA chains, resulting in the best antibacterial adhesion performance. Furthermore, the pronounced hydrophilicity of SBMA enhanced the lubrication of the hydrogel surface, thereby reducing the friction resistance when applied to the hull surface during ship navigation.

Photo-Controllable Smart Hydrogels for Biomedical Application: A Review

Nowadays, smart hydrogels are being widely studied by researchers because of their advantages such as simple preparation, stable performance, response to external stimuli, and easy control of response behavior. Photo-controllable smart hydrogels (PCHs) are a class of responsive hydrogels whose physical and chemical properties can be changed when stimulated by light at specific wavelengths. Since the light source is safe, clean, simple to operate, and easy to control, PCHs have broad application prospects in the biomedical field. Therefore, this review timely summarizes the latest progress in the PCHs field, with an emphasis on the design principles of typical PCHs and their multiple biomedical applications in tissue regeneration, tumor therapy, antibacterial therapy, diseases diagnosis and monitoring, etc. Meanwhile, the challenges and perspectives of widespread practical implementation of PCHs are presented in biomedical applications. This study hopes that PCHs will flourish in the biomedical field and this review will provide useful information for interested researchers.

Recent advances in nanoantibiotics against multidrug-resistant bacteria

Multidrug-resistant (MDR) bacteria-caused infections have been a major threat to human health. The abuse of conventional antibiotics accelerates the generation of MDR bacteria and makes the situation worse. The emergence of nanomaterials holds great promise for solving this tricky problem due to their multiple antibacterial mechanisms, tunable antibacterial spectra, and low probabilities of inducing drug resistance. In this review, we summarize the mechanism of the generation of drug resistance, and introduce the recently developed nanomaterials for dealing with MDR bacteria via various antibacterial mechanisms. Considering that biosafety and mass production are the major bottlenecks hurdling the commercialization of nanoantibiotics, we introduce the related development in these two aspects. We discuss urgent challenges in this field and future perspectives to promote the development and translation of nanoantibiotics as alternatives against MDR pathogens to traditional antibiotics-based approaches.

Advances in preparation and application of antibacterial hydrogels

Bacterial infections, especially those caused by drug-resistant bacteria, have seriously threatened human life and health. There is urgent to develop new antibacterial agents to reduce the problem of antibiotics. Biomedical materials with good antimicrobial properties have been widely used in antibacterial applications. Among them, hydrogels have become the focus of research in the field of biomedical materials due to their unique three-dimensional network structure, high hydrophilicity, and good biocompatibility. In this review, the latest research progresses about hydrogels in recent years were summarized, mainly including the preparation methods of hydrogels and their antibacterial applications. According to their different antibacterial mechanisms, several representative antibacterial hydrogels were introduced, such as antibiotics loaded hydrogels, antibiotic-free hydrogels including metal-based hydrogels, antibacterial peptide and antibacterial polymers, stimuli-responsive smart hydrogels, and light-mediated hydrogels. In addition, we also discussed the applications and challenges of antibacterial hydrogels in biomedicine, which are expected to provide new directions and ideas for the application of hydrogels in clinical antibacterial therapy.

Cross-linked chitosan/lysozyme hydrogels with inherent antibacterial activity and tuneable drug release properties for cutaneous drug administration

Gels with high drug release sustainability and intrinsic antibacterial properties are of high practical potential for cutaneous drug administration, particularly for wound care and skin disease treatment. This study reports the generation and characterization of gels formed by 1,5-pentanedial-mediated crosslinking between chitosan and lysozyme for cutaneous drug delivery. Structures of the gels are characterized by using scanning electron microscopy, X-ray diffractometry and Fourier-transform infrared spectroscopy. An increase in the mass percentage of lysozyme leads to an increase in the swelling ratio and erosion susceptibility of the resulting gels. The drug delivery performance of the gels can be changed simply by manipulating the chitosan/lysozyme mass-to-mass ratio, with an increase in the mass percentage of lysozyme leading to a decline in the encapsulation efficiency and drug release sustainability of the gels. Not only do all gels tested in this study show negligible toxicity in NIH/3T3 fibroblasts, they also demonstrate intrinsic antibacterial effects against both Gram-negative and Gram-positive bacteria, with the magnitude of the effect being positively related to the mass percentage of lysozyme. All these warrant the gels to be further developed as intrinsically antibacterial carriers for cutaneous drug administration.

Drug delivery systems based on polyethylene glycol hydrogels for enhanced bone regeneration

Drug delivery systems composed of osteogenic substances and biological materials are of great significance in enhancing bone regeneration, and appropriate biological carriers are the cornerstone for their construction. Polyethylene glycol (PEG) is favored in bone tissue engineering due to its good biocompatibility and hydrophilicity. When combined with other substances, the physicochemical properties of PEG-based hydrogels fully meet the requirements of drug delivery carriers. Therefore, this paper reviews the application of PEG-based hydrogels in the treatment of bone defects. The advantages and disadvantages of PEG as a carrier are analyzed, and various modification methods of PEG hydrogels are summarized. On this basis, the application of PEG-based hydrogel drug delivery systems in promoting bone regeneration in recent years is summarized. Finally, the shortcomings and future developments of PEG-based hydrogel drug delivery systems are discussed. This review provides a theoretical basis and fabrication strategy for the application of PEG-based composite drug delivery systems in local bone defects.

Gelation Dynamics during Photo-Cross-Linking of Polymer Nanocomposite Hydrogels

Embedding nanomaterials into polymer hydrogels enables the design of functional materials with tailored chemical, mechanical, and optical properties. Nanocapsules that protect interior cargo and disperse readily through a polymeric matrix have drawn particular interest for their ability to integrate chemically incompatible systems and to further expand the parameter space for polymer nanocomposite hydrogels. The properties of polymer nanocomposite hydrogels depend on the material composition and processing route, which were explored systematically in this work. The gelation kinetics of network-forming polymer solutions with and without silica-coated nanocapsules bearing polyethylene glycol (PEG) surface ligands were investigated using in situ dynamic rheology measurements. Network-forming polymers comprised either 4-arm or 8-arm star PEG with terminal anthracene groups, which dimerize upon irradiation with ultraviolet (UV) light. The PEG-anthracene solutions exhibited rapid gel formation upon UV exposure (365 nm); gel formation was observed as a crossover from liquid-like to solid-like behavior during in situ small-amplitude oscillatory shear rheology. This crossover time was non-monotonic with polymer concentration. Far below the overlap concentration (c/c* ≪ 1), spatially separated PEG-anthracene molecules were subject to forming intramolecular loops over intermolecular cross-links, thereby slowing the gelation process. Near the polymer overlap concentration (c/c* ∼ 1), rapid gelation was attributed to the ideal proximity of anthracene end groups from neighboring polymer molecules. Above the overlap concentration (c/c* > 1), increased solution viscosities hindered molecular diffusion, thereby reducing the frequency of dimerization reactions. Adding nanocapsules to PEG-anthracene solutions resulted in faster gelation than nanocapsule-free PEG-anthracene solutions with equivalent effective polymer concentrations. The final elastic modulus of nanocomposite hydrogels increased with nanocapsule volume fraction, signifying synergistic mechanical reinforcement by nanocapsules despite not being cross-linked into the polymer network. Overall, these findings quantify the impact of nanocapsule addition on the gelation kinetics and mechanical properties of polymer nanocomposite hydrogels, which are promising materials for applications in optoelectronics, biotechnology, and additive manufacturing.

Progress in Antibacterial Hydrogel Dressing

Antibacterial hydrogel has excellent antibacterial property and good biocompatibility, water absorption and water retention, swelling, high oxygen permeability, etc.; therefore, it widely applied in biomedicine, intelligent textiles, cosmetics, and other fields, especially for medical dressing. As a wound dressing, the antibacterial hydrogel has the characteristics of absorbing wound liquid, controlling drug release, being non-toxic, being without side effects, and not causing secondary injury to the wound. Its preparation method is simple, and can crosslink via covalent or non-covalent bond, such as γ-radiation croFsslinking, free radical polymerization, graft copolymerization, etc. The raw materials are easy to obtain; usually these include chondroitin sulfate, sodium alginate, polyvinyl alcohol, etc., with different raw materials being used for different antibacterial modes. According to the hydrogel matrix and antibacterial mode, the preparation method, performance, antibacterial mechanism, and classification of antibacterial hydrogels are summarized in this paper, and the future development direction of the antibacterial hydrogel as wound dressing is proposed.

Advances in Barrier Membranes for Guided Bone Regeneration Techniques

Guided bone regeneration (GBR) is a widely used technique for alveolar bone augmentation. Among all the principal elements, barrier membrane is recognized as the key to the success of GBR. Ideal barrier membrane should have satisfactory biological and mechanical properties. According to their composition, barrier membranes can be divided into polymer membranes and non-polymer membranes. Polymer barrier membranes have become a research hotspot not only because they can control the physical and chemical characteristics of the membranes by regulating the synthesis conditions but also because their prices are relatively low. Still now the bone augment effect of barrier membrane used in clinical practice is more dependent on the body’s own growth potential and the osteogenic effect is difficult to predict. Therefore, scholars have carried out many researches to explore new barrier membranes in order to improve the success rate of bone enhancement. The aim of this study is to collect and compare recent studies on optimizing barrier membranes. The characteristics and research progress of different types of barrier membranes were also discussed in detail.

High-Strength, Conductive, Antifouling, and Antibacterial Hydrogels for Wearable Strain Sensors

Conductive hydrogels have shown great potential in the field of flexible strain sensors. However, their application is greatly limited due to the poor antifouling and low mechanical strength. Unfortunately, it is still a challenge to improve these two distinct properties simultaneously. Herein, a hydrogel with high strength, good conductivity, and excellent antifouling and antibacterial properties was prepared through the synergistic effect of physical and chemical cross-linking. First, acrylic acid (AA), acrylamide (AM), and 2-methacryloyloxyethyl phosphorylcholine (MPC) monomers were polymerized in the presence of chitosan chains to form the hydrogel. Then, the prepared hydrogel was immersed in a ferric ion solution to further strengthen the hydrogel through ion coordination. The obtained CS-P(AM-MPC-AA_0.2)-Fe_0.1³⁺ hydrogel showed outstanding tensile strength (1.03 MPa), excellent stretchability (1075%), good toughness (7.03 MJ/m³), and fatigue resistance. The CS-P(AM-MPC-AA_0.2)-Fe_0.1³⁺ hydrogel also demonstrated good ion conductivity (0.42 S/m) and excellent antifouling and antibacterial properties. In addition, the strain sensor constructed by the CS-P(AM-MPC-AA_0.2)-Fe_0.1³⁺ hydrogel showed high sensitivity and good stability. This work presented a facile method to construct a zwitterionic hydrogel with high-strength, conductive, antifouling, and antibacterial properties, which suggested a promising gel platform for flexible wearable sensors.

Cytocompatible, Soft and Thick Brush Modified Scaffolds with Prolonged Antibacterial Effect to Mitigate Wound Infections

Biomedical device or implant associated infections caused by pathogenic bacteria are one of the major leading clinical issues, prevention and/or treatment of which still remain a challenging task. Infection resistant...

Contributions of photochemistry to bio-based antibacterial polymer materials

Surgical site infections constitute a major health concern that may be addressed by conferring antibacterial properties to surgical tools and medical devices via functional coatings. Bio-sourced polymers are particularly well-suited to prepare such coatings as they are usually safe and can exhibit intrinsic antibacterial properties or serve as hosts for bactericidal agents. The goal of this Review is to highlight the unique contribution of photochemistry as a green and mild methodology for the development of such bio-based antibacterial materials. Photo-generation and photo-activation of bactericidal materials are illustrated. Recent efforts and current challenges to optimize the sustainability of the process, improve the safety of the materials and extend these strategies to 3D biomaterials are also emphasized.

Antibacterial Properties of a Honeycomb-like Pattern with Cellulose Acetate and Silver Nanoparticles

This study involved the preparation and characterization of structures with a honeycomb-like pattern (HCP) formed using the phase separation method using a solution mixture of chloroform and methanol together with cellulose acetate. Fluorinated ethylene propylene modified by plasma treatment was used as a suitable substrate for the formation of the HCP structures. Further, we modified the HCP structures using silver sputtering (discontinuous Ag nanoparticles) or by adding Ag nanoparticles in PEG into the cellulose acetate solution. The material morphology was then determined using atomic force microscopy (AFM) and scanning electron microscopy (SEM), while the material surface chemistry was studied using energy dispersive spectroscopy (EDS) and wettability was analyzed with goniometry. The AFM and SEM results revealed that the surface morphology of pristine HCP with hexagonal pores changed after additional sample modification with Ag, both via the addition of nanoparticles and sputtering, accompanied with an increase in the roughness of the PEG-doped samples, which was caused by the high molecular weight of PEG and its gel-like structure. The highest amount (approx. 25 at %) of fluorine was detected using the EDS method on the sample with an HCP-like structure, while the lowest amount (0.08%) was measured on the PEG + Ag sample, which revealed the covering of the substrate with biopolymer (the greater fluorine extent means more of the fluorinated substrate is exposed). As expected, the thickness of the Ag layer on the HCP surface depended on the length of sputtering (either 150 s or 500 s). The sputtering times for Ag (150 s and 500 s) corresponded to layers with heights of about 8 nm (3.9 at % of Ag) and 22 nm (10.8 at % of Ag), respectively. In addition, we evaluated the antibacterial potential of the prepared substrate using two bacterial strains, one Gram-positive of S. epidermidis and one Gram-negative of E. coli. The most effective method for the construction of antibacterial surfaces was determined to be sputtering (150 s) of a silver nanolayer onto a HCP-like cellulose structure, which proved to have excellent antibacterial properties against both G+ and G- bacterial strains.

Chlorin e6 conjugated chitosan as an efficient photoantimicrobial agent

The development of antibacterial agents with high bacteria-binding capability and antibacterial efficiency is highly desirable. Herein, cationic polysaccharide chitosan (CS) was combined with photosensitizer Chlorin e6 (Ce6) to construct a novel photodynamic antibacterial agent (CS-Ce6 conjugates) for combating gram-positive bacteria Staphylococcus aureus (S. aureus) and gram-negative bacteria Escherichia coli (E. coli). CS-Ce6 conjugates with different degrees of substitution (DS) were synthesized and characterized by a spectroscopic method and organic elemental analysis to understand the relationship between structure and antibacterial effect. CS-Ce6 conjugates revealed good reactive oxygen species (ROS) generation ability and photodynamic antibacterial effect. Meanwhile, they both were positively correlated with DS in the range of 4.81% ~ 11.56% resulting in stronger photodynamic antibacterial ability. These findings highlight that CS-Ce6 conjugates have the potential as an effective photodynamic bactericidal agent in the antibacterial field.

Photopolymerization of Bio-Based Polymers in a Biomedical Engineering Perspective

Photopolymerization is an effective method to covalently cross-link polymer chains that can be shaped into several biomedical products and devices. Additionally, polymerization reaction may induce a fluid-solid phase transformation under physiological conditions and is ideal for in vivo cross-linking of injectable polymers. The photoinitiator is a key ingredient able to absorb the energy at a specific light wavelength and create radicals that convert the liquid monomer solution into polymers. The combination of photopolymerizable polymers, containing appropriate photoinitiators, and effective curing based on dedicated light sources offers the possibility to implement photopolymerization technology in 3D bioprinting systems. Hence, cell-laden structures with high cell viability and proliferation, high accuracy in production, and good control of scaffold geometry can be biofabricated. In this review, we provide an overview of photopolymerization technology, focusing our efforts on natural polymers, the chemistry involved, and their combination with appropriate photoinitiators to be used within 3D bioprinting and manufacturing of biomedical devices. The reviewed articles showed the impact of different factors that influence the success of the photopolymerization process and the final properties of the cross-linked materials.

Highly antifouling, biocompatible and tough double network hydrogel based on carboxybetaine-type zwitterionic polymer and alginate

Because of resistance to bio-macromolecular adhesion, antifouling hydrogels have attracted great attention in biomedical field. But traditional antifouling hydrogels made by hydrophilic polymers are always poor of mechanical properties. Herein, a new hybrid ionic-covalent cross-linked double network (DN) hydrogel was prepared by a simple one-pot method based on sodium alginate and the zwitterionic material carboxybetaine acrylamide (CBAA). The DN hydrogel has good mechanical properties, including high elastic modulus (0.28 MPa), high tensile strength (0.69 MPa), as well as good self-recovery capability. More importantly, the DN hydrogel is highly resistance to the adsorption of non-specific protein, cells, bacteria and algae, exhibiting an outstanding antifouling property. The in vitro and in vivo experiments prove that the DN hydrogel is highly biocompatible. This study provides a new strategy for the preparation of antifouling DN hydrogels with good mechanical properties for different needs, such as tissue scaffolds, wound dressings, implantable devices, and other fields.

Development of Inherently Antibacterial, Biodegradable, and Biologically Active Chitosan/Pseudo-Protein Hybrid Hydrogels as Biofunctional Wound Dressings

Developing a new family of hydrogel-based wound dressings that could have a dual biofunctionality of antibacterial and biological responses is highly desirable. In this study, an inherently effective antibacterial and biodegradable hydrogel dressing without the need for impregnated antibiotics was designed, synthesized, characterized, and examined for its effect on macrophages, which initiated inflammatory activity and activated both NO and TNF-α production for the purpose of achieving a better and faster wound healing. The purposes of this research was to develop a novel family of cationic biodegradable hydrogels based on arginine-based poly(ester urea urethane) (Arg-PEUU) and glycidyl methacrylate-modified chitosan (CS-GMA) that has both inherent antibacterial and bioactive functionality as a wound healing dressing for accelerated healing of contaminated or infected wounds. These hybrid hydrogels present a well-defined three-dimensional microporous network structure and have a high water absorption ability, and their biodegradation is effectively accelerated in the presence of lysozymes. The hemolytic activity test, MTT assay, and live/dead assay of these hybrid hydrogels indicated that they had no cytotoxicity toward red blood cells, NIH-3T3 fibroblast cells, and human vascular endothelial cells, thus corroborating their cytocompatibility. Furthermore, these hybrid hydrogels could elevate the release of both produced NO and TNF-α by stimulating and activating RAW 264.7 macrophages, augmenting their antibacterial biological response. The antibacterial assay of these hybrid hydrogels demonstrated their excellent antibacterial activity without the need for impregnated antibacterial agents. Taken together, this new family of biodegradable, antibacterial, and biologically responsive hybrid hydrogels exhibits great potential as biofunctional antibacterial wound dressing candidates for wound healing.

Chitosan-based smart hybrid materials: a physico-chemical perspective

Chitosan is one of the most studied cationic polysaccharides. Due to its unique characteristics of being water soluble, biocompatible, biodegradable, and non-toxic, this macromolecule is highly attractive for a broad range of applications. In addition, its complex behavior and the number of ways it interacts with different components in a system result in an astonishing variety of chitosan-based materials. Herein, we present recent advances in the field of chitosan-based materials from a physico-chemical perspective, with focus on aqueous mixtures with oppositely charged colloids, chitosan-based thin films, and nanocomposite systems. In this review, we focus our attention on the physico-chemical properties of chitosan-based materials, including solubility, mechanical resistance, barrier properties, and thermal behaviour, and provide a link to the chemical peculiarities of chitosan, such as its intrinsic low solubility, high rigidity, large charge separation, and strong tendency to form intra- and inter-molecular hydrogen bonds.

Research Progress of Thermosensitive Hydrogel in Tumor Therapeutic

Compared with traditional tumor therapy strategies, hydrogel as a drug reservoir system can realize on-demand drug release and deep tissue penetration ability. It also exhibits great tumor-site retention to enhance the permeability and retention effect of tumor treatment. This can significantly overcome the drug's resistance and severe side effects. Inorganic/organic composite hydrogel has attracted wide attention due to its combined effects, enhancing therapeutic effects against various kinds of tumors. In situ injectable hydrogel can securely restrict the drugs in the lesion sites without leakage and guarantee better biosafety. Moreover, hydrogel possesses interconnected macropores which can provide enough space for nutrient transport, cellular activity, and cell-cell interactions. Thermal therapy is an effective strategy for tumor therapy due to its minimal invasiveness and high selectivity. Because the location temperature can be precisely controlled and helps avoid the risks of destroying the body's immune system and ablate normal cells, thermal therapy exhibits significant treatment outcomes. Nonetheless, when the cellular temperature reaches approximately 43 °C, it causes long-term cell inactivation. Based on these merits, thermosensitive hydrogel formulation with adaptive functions shows excellent efficacy, unlimited tissue penetration capacity, and few deleterious side effects. Furthermore, the thermosensitive hydrogel has unique physical properties under the external stimuli, which is the ideal drug delivery system for on-demand release in tumor treatment. This article will review the state of the thermosensitive hydrogel in clinic application for cancer therapy.

Light and Hydrogels: A New Generation of Antimicrobial Materials

Nosocomial diseases are becoming a scourge in hospitals worldwide, and new multidrug-resistant microorganisms are appearing at the forefront, significantly increasing the number of deaths. Innovative solutions must emerge to prevent the imminent health crisis risk, and antibacterial hydrogels are one of them. In addition to this, for the past ten years, photochemistry has become an appealing green process attracting continuous attention from scientists in the scope of sustainable development, as it exhibits many advantages over other methods used in polymer chemistry. Therefore, the combination of antimicrobial hydrogels and light has become a matter of course to design innovative antimicrobial materials. In the present review, we focus on the use of photochemistry to highlight two categories of hydrogels: (a) antibacterial hydrogels synthesized via a free-radical photochemical crosslinking process and (b) chemical hydrogels with light-triggered antibacterial properties. Numerous examples of these new types of hydrogels are described, and some notions of photochemistry are introduced.

Mussel-Inspired Polymeric Coatings to Realize Functions from Single and Dual to Multiple Antimicrobial Mechanisms

Numerous efforts to fabricate antimicrobial surfaces by simple yet universal protocols with high efficiency have attracted considerable interest but proved to be particularly challenging. Herein, we designed and fabricated a series of antimicrobial polymeric coatings with different functions from single to multiple mechanisms by selectively utilizing diethylene glycol diglycidyl ether (PEGDGE), polylysine, and poly[glycidylmethacrylate-co-3-(dimethyl(4-vinylbenzyl)ammonium)propyl sulfonate] (poly(GMA-co-DVBAPS)) via straightforward mussel-inspired codeposition techniques. Bactericidal polylysine endowed the modified surfaces with a high ability (∼90%) to kill attached bacteria, while PEGDGE components with unique surface hydration prevented bacterial adhesion, avoiding the initial biofilm formation. Moreover, excellent salt-responsive poly(GMA-co-DVBAPS) enabled reactant polymeric coatings to change chain conformations from shrinkable to stretchable state and subsequently release >90% attached bacteria when treated with NaCl solution, even after repeated cycles. Therefore, the obtained polymeric coatings, polydopamine/poly(GMA-co-DVBAPS) (PDA/PDV), polydopamine/polylysine/poly(GMA-co-DVBAPS) (PDA/l-PDV), and polydopamine/polylysine/poly(GMA-co-DVBAPS)/diethylene glycol diglycidyl ether (PDA/l-PDV-PEGDGE), controllably realized functions from single and dual to multiple antimicrobial mechanisms, as evidenced by long-term antifouling activity to bacteria, high bactericidal efficiency, and salt-responsive bacterial regeneration performance with several bacterial killing-release cycles. This study not only contributes to mussel-inspired chemistry for polymeric coatings with controllable functions but also provides a series of reliable and highly efficient antimicrobial surfaces for potential biomedical applications.

Preparation and characterization of vancomycin-loaded chitosan/PVA/PEG hydrogels for wound dressing

This study describes a drug-loaded porous hydrogel for delivery of vancomycin. Hydrogels based on chitosan (CS), Polyvinyl alcohol (PVA) and Polyethylene glycol (PEG) were prepared by lyophilization. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and fourier transform infrared (FTIR) spectroscopy were used to characterize the structures. Water uptake percentage and vancomycin release were also measured. The antibacterial activity against Staphylococcus aureus was investigated. According to the results, mean pore diameter (MPD) was decreased by addition of PEG and reached to 1.3 ± 0.5 μm. On the other hand, 43% decrease in water content of the hydrogels showed along with the incorporation of PEG. The inhibition zone confirmed antibacterial effect of the vancomycin-loaded hydrogels. The porous CS/PVA/PEG hydrogels containing vancomycin could be good candidates to potentially be used as wound dressing.

Synthesis and characterization of a polymeric network made of polyethylene glycol and chitosan as a treatment with antibacterial properties for skin wounds

Polyethylene glycol has been widely investigated for wound healing and dressing applications. Despite its advantages (i.e. great biocompatibility), polyethylene glycol lacks antibacterial activity. For this reason, semi-interpenetrated polymeric networks were prepared by combining a chemically cross-linked polyethylene glycol network with chitosan. The aim of this work was to identify the best amount of chitosan able to improve the antibacterial properties against Staphylococcus aureus. Briefly, the networks were synthesized by a sequential method, adding chitosan in different proportion to the polyethylene glycol. The antibacterial activity was tested following the MGA 0100 of the Pharmacopeia of the United States of Mexico. Fourier-transform infrared with attenuated total reflection spectroscopy, scanning electron microscopy and swelling behavior PBS at 37° C and room temperature were also performed to characterize the polymeric networks. The results showed that PC-2% was able to inhibit the bacterial growth of Staphylococcus aureus even more than Fosfomycin antibiotic. The networks showed cylindrical pores of different sizes (50-100 µm). The maximum swelling of all the networks was achieved in PBS at 37°C (>315%). Free hemoglobin and hemolysis assays were also evaluated to know the compatibility with erythrocytes. Human dermal fibroblasts were used to evaluate direct cytotoxicity. Therefore, the produced gels exerted interesting antibacterial activity and showed good biocompatibility properties.

Bioactive silver phosphate/polyindole nanocomposites

Materials capable of releasing reactive oxygen species (ROS) can display antibacterial and anticancer activity, and may also have anti-oxidant capacity if they suppress intracellular ROS (e.g. nitric oxide, NO) resulting in anti-inflammatory activity. Herein we report silver phosphate (Ag₃PO₄)/polyindole (Pln) nanocomposites which display antibacterial, anticancer and anti-inflammatory activity, and have therefore potential for a variety of biomedical applications.

Materials capable of releasing reactive oxygen species (ROS) can display antibacterial and anticancer activity, and may also have antioxidant capacity if they suppress intracellular ROS (e.g. nitric oxide, NO) resulting in anti-inflammatory activity.