Adhesive transparent antimicrobial quaternized chitosan/oxidized dextran/polydopamine nanoparticle hydrogels for accelerated wound healing

Hydrogels possessing appropriate adhesion and antibacterial properties have emerged as promising dressings for expediting wound healing, while also providing the convenience of visualizing the wound site to accurately monitor the healing process. In this study, we incorporated oxidized and degraded polydopamine nanoparticles into quaternized chitosan/oxidized dextran hydrogel QOP series, resulting in enhanced transmittance exceeding 95 % and adhesion strengths reaching up to 19.4 kPa. Moreover, these hydrogels exhibit a well-defined porous structure, rapid gelling ability (<50 s), exceptional self-healing capacity, and a swelling rate surpassing 760 %. Furthermore, the QOP hydrogels demonstrate outstanding hemocompatibility (hemolysis rate < 3 %) and cytocompatibility (cell viability >100 %). In addition, they display potent inhibition against Staphylococcus aureus, methicillin-resistant S. aureus (MRSA), Staphylococcus pasteuri and Escherichia coli, with bactericidal rates exceeded 90 %. The closure of MRSA-infected wounds along with H&E and Masson staining analysis revealed that QOP hydrogels can expedite wound healing by stimulating collagen deposition and facilitating angiogenesis.

Multi-crosslinking nanoclay/oxidized cellulose hydrogel bandage with robust mechanical strength, antibacterial and adhesive properties for emergency hemostasis

Emergency bleeding presents significant challenges such as high blood flow and rapid hemorrhaging. However, many existing hemostatic bandages face limitations, including the uncontrolled release of hemostatic agents, insufficient mechanical strength, poor adhesion, and complex manufacturing processes. To address these limitations, we developed a multifunctional hydrogel bandage for emergency hemostasis using a one-pot synthesis method. The hydrogel was composed of kaolin, N-hydroxysuccinimide-grafted oxidized microcrystalline cellulose (OMCC-NHS), and polyacrylic acid (PAA). Featuring a multi-crosslinked network, it exhibited favorable elasticity (∼942 %), tensile strength (∼220 kPa), fatigue resistance, and robust tissue adhesion (∼55 kPa)-3.9 times stronger than commercial wound-closure strips, and it maintained adhesion even underwater. In addition to its mechanical properties, the hydrogel also exhibited satisfactory antibacterial activity, cytocompatibility, and histocompatibility. In vivo evaluations revealed an impressive hemostatic performance in rat models of liver bleeding, femoral artery bleeding, and tail amputation. Specifically, in the liver bleeding model, the hydrogel reduced blood loss to only 0.1 g, which is just 32 % of the blood loss seen with medical gauze. Notably, in New Zealand rabbit models with cardiac punctures and liver injuries, the hydrogel achieved rapid hemostasis and stopped the bleeding within seconds. The effective hemostatic ability of this hydrogel is primarily due to its ability to facilitate multistep hemostasis, which includes sealing the wound, rapidly absorbing blood, promoting RBC and platelets adhesion, and activating the intrinsic coagulation cascade. Therefore, this study provides a promising approach for developing gel-based hemostatic bandages, specifically tailored for emergency compressible bleeding scenarios.

Electrospinning in promoting chronic wound healing: materials, process, and applications

In the field of wound treatment, chronic wounds pose a significant burden on the medical system, affecting millions of patients annually. Current treatment methods often fall short in promoting effective wound healing, highlighting the need for innovative approaches. Electrospinning, a technique that has garnered increasing attention in recent years, shows promise in wound care due to its unique characteristics and advantages. Recent studies have explored the use of electrospun nanofibers in wound healing, demonstrating their efficacy in promoting cell growth and tissue regeneration. Researchers have investigated various materials for electrospinning, including polymers, ceramics, carbon nanotubes (CNTs), and metals. Hydrogel, as a biomaterial that has been widely studied in recent years, has the characteristics of a cell matrix. When combined with electrospinning, it can be used to develop wound dressings with multiple functions. This article is a review of the application of electrospinning technology in the field of wound treatment. It introduces the current research status in the areas of wound pathophysiology, electrospinning preparation technology, and dressing development, hoping to provide references and directions for future research.

Atomic-layer-deposition application for antibacterial coating of biomedical materials: surgical sutures

Suture-associated surgical site infection (SSI) causes bacterial pathogens to colonize on the suture surface that are highly resistant to antibiotic treatment. Conventional suture materials used in surgical practice are causing complications such as infection and chronic inflammation. Surgical suture materials with antibacterial coatings are widely used in surgical practice. However, all the widely used antibacterial agents are not permanent (limited lasting) due to their instability and release depending on environmental conditions (pH or temperature, for example). Therefore, more long-lasting (low-dose) and effective antibacterial function materials are required. In the present work, we proposed a new material and method of antibacterial coating the surgical sutures based on the atomic layer deposition (ALD) technique to enhance its antibacterial activity for treatment of the SSI. We have proposed applying a vanadium-doped TiO2nanofilm (hybrid nanomaterial, TiVOx) with 27.5 nm thickness to enhance the antibacterial property of surgical sutures using the ALD technique. We have illustrated that a base coating of Al2O3(seed layer) applied to the suture surface, which directly contacts the polypropylene (PP) suture, improves the adhesion of the deposited antibacterial material TiVOx. This provides a long-lasting antibacterial effect on the suture (a prolonged antibacterial effect of the coating material), i.e. increases the stability of the deposition (stable in water, air, in the human body, in different pH mediums, and at temperatures up to 70 °C). The sutures did not deteriorate after several wash cycles with sterilizing solvents. Also, the antibacterial agent (TiVOx) is nontoxic. The concentration of vanadium in the film is below the toxicity limits due to the low diffusivity of vanadium and high adhesion with the base coating material (Al2O3). Sutures coated with V-doped TiO2were characterized using scanning electron microscopy images, and elemental analysis was performed using energy dispersive spectroscopy Spectroscopy. The antibacterial activity of TiVOxcoated sutures against two types of microorganisms,E. coliand Proteus vulgaris (Pr. Vulgaris) was compared to that of noncoated sutures. The quantitative assessment of antibacterial activity of suture materials with and without ALD nanocoating TiVOxagainstE. coliandPr. Vulgarishas been performed. No growth of bacteria around the suture material with antibacterial TiVOxALD nanocoating throughout the entire observation period of 48 and 72 h was observed. However, after 48 h, the concentration of bacteria of theE. Coliaround the suture material without ALD TiVOxnanocoating on nutrient agar was 5.5 ± 0.3 Log CFU cm-3, and after 72 h it was 8.0 ± 0.5 Log CFU cm-3. For Pr. Vilgaris, after 48 h, the concentration of bacteria around the suture material without ALD TiVOxnanocoating on nutrient agar was 2.1 ± 0.1 Log CFU cm-3, while after 72 h it was 4.5 ± 0.2 Log CFU cm-3. ALD-coated TiVOxon the PP sutures inhibited approximately 100% of biofilm formation. Also, the inhibition zones in the disc diffusion assay revealed that all the ALD TiVOxcoating inhibited (100%) the growth ofE. coliandPr. Vulgaris, notably compared to the uncoated suture samples.

Unlocking the Potential of Hybrid Nanocomposite Hydrogels: Design, Mechanical Properties and Biomedical Performances

Hybrid nanocomposite hydrogels consist of the homogeneous incorporation of nano‐objects in a hydrogel matrix. The latter, whether made of natural or synthetic materials, possesses a microporous, soft structure that makes it an ideal host for a variety of polymer and lipid‐based nano‐objects as well as metal‐ and silica‐based ones. By carefully choosing the composition and the proportions of the different constituents, hybrid hydrogels can display a wide array of properties, from simple enhancement of mechanical characteristics to specific bioactivity. This review aims to provide an overview of the state of the art in hybrid hydrogels highlighting key aspects that make them a promising choice for a variety of biomedical applications. Strategies for the preparation of hybrid hydrogels are discussed by covering the selection of individual components. The review will also explore the physico‐chemical and rheological characterization of these materials, which is essential for understanding their structure and function, ultimately satisfying specifications for the intended use. Successful examples of biomedical applications will also be presented, and the main challenges to be met will be discussed, with the aim of stimulating the research community to exploit the full potential of these materials.

Hybrid Nanoparticle-Hydrogel Systems for Drug Delivery Depots and Other Biomedical Applications

Hydrogel-based depots typically tend to remain where injected and have excellent biocompatibility but are relatively poor at controlling drug release. Nanoparticles (NPs) typically have the opposite properties. The smaller the NPs are, the more likely they are to leave the site of injection. Their biocompatibility is variable depending on the material but can be poor. However, NPs can be good at controlling drug release. In these and other properties, combining NPs and hydrogels can leverage their advantages and negate their disadvantages. This review highlights the rationale for hybrid NP-hydrogel systems in drug delivery, the basic methods of producing them, and examples where combining the two systems addressed specific problems.

Calcium Ion-Coupled Polyphosphates with Different Degrees of Polymerization for Bleeding Control

The development of efficient hemostatic materials is crucial for achieving rapid hemorrhage control and effective wound healing. Inorganic polyphosphate (polyP) is recognized as an effective modulator of the blood coagulation process. However, the specific effect of polyP chain length on coagulation is not yet fully understood. Furthermore, calcium ions (Ca2+) are essential for the coagulation process, promoting multiple enzyme-catalyzed reactions within the coagulation cascade. Hence, calcium ion-coupled polyphosphate powders with three different degrees of polymerization (CaPP-n, n = 20, 50, and 1500) are synthesized by an ion-exchange reaction. CaPP exhibits a crystalline phase at a low polymerization degree and transitions to an amorphous phase as the polymerization degree increases. Notably, the addition of Ca2+ enhances the wettability of polyP, and CaPP promotes hemostasis, with varying degrees of effectiveness related to chain length. CaPP-50 exhibits the most promising hemostatic performance, with the lowest blood clotting index (BCI, 12.1 ± 0.7%) and the shortest clotting time (302.0 ± 10.5 s). By combining Ca2+ with polyP of medium-chain length, CaPP-50 demonstrates an enhanced ability to accelerate the adhesion and activation of blood cells, initiate the intrinsic coagulation cascade, and form a stable blood clot, outperforming both CaPP-20 and CaPP-1500. The hemostatic efficacy of CaPP-50 is further validated using rat liver bleeding and femoral artery puncture models. CaPP-50 is proven to possess hemostatic properties comparable to those of commercial calcium-based zeolite hemostatic powder and superior to kaolin. In addition, CaPP-50 exhibits excellent biocompatibility and long-term storage stability. These results suggest that CaPP-50 has significant clinical and commercial potential as an active inorganic hemostatic agent for rapid control of bleeding.

Size- and Shape-Dependent Interactions of Lipid-Coated Silver Nanoparticles: An Improved Mechanistic Understanding through Model Cell Membranes and In Vivo Toxicity

The widespread use of silver nanoparticles (AgNPs) in various applications and industries has brought to light the need for understanding the complex relationship between the physicochemical properties (shape, size, charge, and surface chemistry) of AgNPs that affect their ability to enter cells and cause toxicity. To evaluate their toxicological outcomes, this study systematically analyzed a series of homogeneous hybrid lipid-coated AgNPs spanning sizes from 5 to 100 nm with diverse shapes (spheres, triangles, and cubes). The hybrid lipid membrane comprises hydrogenated phosphatidylcholine (HPC), sodium oleate (SOA), and hexanethiol (HT), which shield the AgNP surface from surface oxidation and toxic Ag+ ion release to minimize its contribution to toxicity. To reduce any significant effects by surface chemistry, the HPC, SOA, and HT membrane composition ratio was kept constant, and the AgNPs were assessed using embryonic zebrafish (Danio rerio). While a direct comparison cannot be drawn due to the lack of complementary sizes below 40 nm for triangular plates and cubes due to synthetic challenges, significant mortality was observed for spherical AgNPs (AgNSs) of 5, 20, 40, and 60 nm at 120 h postfertilization at concentrations ≥6 mg Ag/L. In contrast, the 10, 80, and 100 nm AgNSs, 40, 70, and 100 nm triangular plate AgNPs (AgNPLs), and 55, 75, and 100 nm cubic AgNPs (AgNCs) showed no significant mortality at 5 days postfertilization following exposure to AgNPs at concentrations up to 12 mg Ag/L. With constant surface chemistry on the AgNPs, size is the dominant factor driving toxicological responses, with smaller nanoparticles (5 to 60 nm) being the most toxic. Larger AgNSs, AgNCs, and AgNPLs from 75 to 100 nm do not show any evidence of toxicity. However, when closely examining sizes between 40 and 60 nm for AgNSs, AgNCs, and AgNPLs, there is evidence that discriminates shape as a driver of toxicity since sublethal responses generally were observed to follow a pattern, suggesting toxicity is most significant for AgNSs followed by AgNPLs and then AgNCs, which is the least toxic. Sum frequency generation vibrational spectroscopy showed that irrespective of size or shape, all hybrid lipid-coated AgNPs interact with membrane surfaces and "snorkel" between phases into the lipid monolayer with minimal energetic cost. These findings decisively demonstrate that not only smaller AgNPs but also the shape of the AgNPs influences their biological compatibility.

Multifunctional polypeptide-based hydrogel bio-adhesives with pro-healing activities and their working principles

Wound healing is a complex physiological process involving hemostasis, inflammation, proliferation, and tissue remodeling. Therefore, there is an urgent need for suitable wound dressings for effective and systematical wound management. Polypeptide-based hydrogel bio-adhesives offer unique advantages and are ideal candidates. However, comprehensive reviews on polypeptide-based hydrogel bio-adhesives for wound healing are still lacking. In this review, the physiological mechanisms and evaluation parameters of wound healing were first described in detail. Then, the working principles of hydrogel bio-adhesives were summarized. Recent advances made in multifunctional polypeptide-based hydrogel bio-adhesives involving gelatin, silk fibroin, fibrin, keratin, poly-γ-glutamic acid, ɛ-poly-lysine, serum albumin, and elastin with pro-healing activities in wound healing and tissue repair were reviewed. Finally, the current status, challenges, developments, and future trends of polypeptide-based hydrogel bio-adhesives were discussed, hoping that further developments would be stimulated to meet the growing needs of their clinical applications.

Optimizing Wound Healing: Examining the Influence of Biopolymers Through a Comprehensive Review of Nanohydrogel-Embedded Nanoparticles in Advancing Regenerative Medicine

Nanohydrogel wound healing refers to the use of nanotechnology-based hydrogel materials to promote the healing of wounds. Hydrogel dressings are made up of a three-dimensional network of hydrophilic polymers that can absorb and retain large amounts of water or other fluids. Nanohydrogels take this concept further by incorporating nanoscale particles or structures into the hydrogel matrix. These nanoparticles can be made of various materials, such as silver, zinc oxide, or nanoparticles derived from natural substances like chitosan. The inclusion of nanoparticles can provide additional properties and benefits to the hydrogel dressings. Nanohydrogels can be designed to release bioactive substances, such as growth factors or drugs, in a controlled manner. This allows for targeted delivery of therapeutics to the wound site, promoting healing and reducing inflammation. Nanoparticles can reinforce the structure of hydrogels, improving their mechanical strength and stability. Nanohydrogels often incorporate antimicrobial nanoparticles, such as silver or zinc oxide. These nanoparticles have shown effective antimicrobial activity against a wide range of bacteria, fungi, and other pathogens. By incorporating them into hydrogel dressings, nanohydrogels can help prevent or reduce the risk of infection in wounds. Nanohydrogels can be designed to encapsulate and release bioactive substances, such as growth factors, peptides, or drugs, in a controlled and sustained manner. This targeted delivery of therapeutic agents promotes wound healing by facilitating cell proliferation, reducing inflammation, and supporting tissue regeneration. The unique properties of nanohydrogels, including their ability to maintain a moist environment and deliver bioactive agents, can help accelerate the wound healing process. By creating an optimal environment for cell growth and tissue repair, nanohydrogels can promote faster and more efficient healing of wounds.

Impacts of Differentially Shaped Silver Nanoparticles with Increasingly Complex Hydrophobic Thiol Surface Coatings in Small-Scale Laboratory Microcosms

We investigated the impacts of spherical and triangular-plate-shaped lipid-coated silver nanoparticles (AgNPs) designed to prevent surface oxidation and silver ion (Ag+) dissolution in a small-scale microcosm to examine the role of shape and surface functionalization on biological interactions. Exposures were conducted in microcosms consisting of algae, bacteria, crustaceans, and fish embryos. Each microcosm was exposed to one of five surface chemistries within each shape profile (at 0, 0.1, or 0.5 mg Ag/L) to investigate the role of shape and surface composition on organismal uptake and toxicity. The hybrid lipid-coated AgNPs did not result in any significant release of Ag+ and had the most significant toxicity to D. magna, the most sensitive species, although the bacterial population growth rate was reduced in all exposures. Despite AgNPs resulting in increasing algal growth over the experiment, we found no correlation between algal growth and the survival of D. magna, suggesting that the impacts of the AgNPs on bacterial survival influenced algal growth rates. No significant impacts on zebrafish embryos were noted in any exposure. Our results demonstrate that the size, shape, and surface chemistry of AgNPs can be engineered to achieve specific goals while mitigating nanoparticle risks.

Hydrogel Loaded with Peptide-Containing Nanocomplexes: Symphonic Cooperation of Photothermal Antimicrobial Nanoparticles and Prohealing Peptides for the Treatment of Infected Wounds

Current treatment for chronic infectious wounds is limited due to severe drug resistance in certain bacteria. Therefore, the development of new composite hydrogels with nonantibiotic antibacterial and pro-wound repair is important. Here, we present a photothermal antibacterial composite hydrogel fabricated with a coating of Fe2+ cross-linked carboxymethyl chitosan (FeCMCS) following the incorporation of melanin nanoparticles (MNPs) and the CyRL-QN15 peptide. Various physical and photothermal properties of the hydrogel were characterized. Cell proliferation, migration, cycle, and free-radical scavenging activity were assessed, and the antimicrobial properties of the hydrogel were probed by photothermal therapy. The effects of the hydrogel were validated in a model of methicillin-resistant Staphylococcus aureus (MRSA) infection with full-thickness injury. This effect was further confirmed by changes in cytokines associated with inflammation, re-epithelialization, and angiogenesis on the seventh day after wound formation. The MNPs demonstrated robust photothermal conversion capabilities. The composite hydrogel (MNPs/CyRL-QN15/FeCMCS) promoted keratinocyte and fibroblast proliferation and migration while exhibiting high antibacterial efficacy, effectively killing more than 95% of Gram-positive and Gram-negative bacteria. In vivo study using an MRSA-infected full-thickness injury model demonstrated good therapeutic efficacy of the hydrogel in promoting regeneration and remodeling of chronically infected wounds by alleviating inflammatory response and accelerating re-epithelialization and collagen deposition. The MNPs/CyRL-QN15/FeCMCS hydrogel showed excellent antibacterial and prohealing effects on infected wounds, indicating potential as a promising candidate for wound healing promotion.

Functional hemostatic hydrogels: design based on procoagulant principles

Uncontrolled hemorrhage results in various complications and is currently the leading cause of death in the general population. Traditional hemostatic methods have drawbacks that may lead to ineffective hemostasis and even the risk of secondary injury. Therefore, there is an urgent need for more effective hemostatic techniques. Polymeric hemostatic materials, particularly hydrogels, are ideal due to their biocompatibility, flexibility, absorption, and versatility. Functional hemostatic hydrogels can enhance hemostasis by creating physical circumstances conducive to hemostasis or by directly interfering with the physiological processes of hemostasis. The procoagulant principles include increasing the concentration of localized hemostatic substances or establishing a physical barrier at the physical level and intervention in blood cells or the coagulation cascade at the physiological level. Moreover, synergistic hemostasis can combine these functions. However, some hydrogels are ineffective in promoting hemostasis or have a limited application scope. These defects have impeded the advancement of hemostatic hydrogels. To provide inspiration and resources for new designs, this review provides an overview of the procoagulant principles of hemostatic hydrogels. We also discuss the challenges in developing effective hemostatic hydrogels and provide viewpoints.

Mesoporous Bioactive Glass-Graphene Oxide Composite Aerogel with Effective Hemostatic and Antibacterial Activities

Hemorrhage and infection after emergency trauma are two main factors that cause deaths. It is of great importance to instantly stop bleeding and proceed with antibacterial treatment for saving lives. However, there is still a huge need and challenge to develop materials with functions of both rapid hemostasis and effective antibacterial therapy. Herein, we propose the fabrication of a composite aerogel mainly consisting of mesoporous bioactive glass (MBG) and graphene oxide (GO) through freeze-drying. This composite aerogel has a three-dimensional porous structure, high absorption, good hydrophilicity, and negative zeta potential. Moreover, it exhibits satisfactory hemostatic activities including low BCI, good hemocompatibility, and activation of intrinsic pathways. When applied to rat liver injury bleeding, it can decrease 60% hemostasis time and 75% blood loss amount compared to medical gauze. On the other hand, the composite aerogel shows excellent photothermal antibacterial capacity against Staphylococcus aureus and Escherichia coli. Animal experiments further verify that this composite aerogel can effectively kill bacteria in wound sites via photothermal treatment and promote wound healing. Hence, this MBG-GO composite aerogel makes a great choice for the therapy of emergency trauma with massive hemorrhage and bacterial infection.

Supramolecular hydrogels for wound repair and hemostasis

The unique network characteristics and stimuli responsiveness of supramolecular hydrogels have rendered them highly advantageous in the field of wound dressings, showcasing unprecedented potential. However, there are few reports on a comprehensive review of supramolecular hydrogel dressings for wound repair and hemostasis. This review first introduces the major cross-linking methods for supramolecular hydrogels, which includes hydrogen bonding, electrostatic interactions, hydrophobic interactions, host-guest interactions, metal ligand coordination and some other interactions. Then, we review the advanced materials reported in recent years and then summarize the basic principles of each cross-linking method. Next, we classify the network structures of supramolecular hydrogels before outlining their forming process and propose their potential future directions. Furthermore, we also discuss the raw materials, structural design principles, and material characteristics used to achieve the advanced functions of supramolecular hydrogels, such as antibacterial function, tissue adhesion, substance delivery, anti-inflammatory and antioxidant functions, cell behavior regulation, angiogenesis promotion, hemostasis and other innovative functions in recent years. Finally, the existing problems as well as future development directions of the cross-linking strategy, network design, and functions in wound repair and hemostasis of supramolecular hydrogels are discussed. This review is proposed to stimulate further exploration of supramolecular hydrogels on wound repair and hemostasis by researchers in the future.

Multifunctional and theranostic hydrogels for wound healing acceleration: An emphasis on diabetic-related chronic wounds

Hydrogels represent intricate three-dimensional polymeric structures, renowned for their compatibility with living systems and their ability to naturally degrade. These networks stand as promising and viable foundations for a range of biomedical uses. The practical feasibility of employing hydrogels in clinical trials has been well-demonstrated. Among the prevalent biomedical uses of hydrogels, a significant application arises in the context of wound healing. This intricate progression involves distinct phases of inflammation, proliferation, and remodeling, often triggered by trauma, skin injuries, and various diseases. Metabolic conditions like diabetes have the potential to give rise to persistent wounds, leading to delayed healing processes. This current review consolidates a collection of experiments focused on the utilization of hydrogels to expedite the recovery of wounds. Hydrogels have the capacity to improve the inflammatory conditions at the wound site, and they achieve this by diminishing levels of reactive oxygen species (ROS), thereby exhibiting antioxidant effects. Hydrogels have the potential to enhance the growth of fibroblasts and keratinocytes at the wound site. They also possess the capability to inhibit both Gram-positive and Gram-negative bacteria, effectively managing wounds infected by drug-resistant bacteria. Hydrogels can trigger angiogenesis and neovascularization processes, while also promoting the M2 polarization of macrophages, which in turn mitigates inflammation at the wound site. Intelligent and versatile hydrogels, encompassing features such as pH sensitivity, reactivity to reactive oxygen species (ROS), and responsiveness to light and temperature, have proven advantageous in expediting wound healing. Furthermore, hydrogels synthesized using environmentally friendly methods, characterized by high levels of biocompatibility and biodegradability, hold the potential for enhancing the wound healing process. Hydrogels can facilitate the controlled discharge of bioactive substances. More recently, there has been progress in the creation of conductive hydrogels, which, when subjected to electrical stimulation, contribute to the enhancement of wound healing. Diabetes mellitus, a metabolic disorder, leads to a slowdown in the wound healing process, often resulting in the formation of persistent wounds. Hydrogels have the capability to expedite the healing of diabetic wounds, facilitating the transition from the inflammatory phase to the proliferative stage. The current review sheds light on the biological functionalities of hydrogels, encompassing their role in modulating diverse mechanisms and cell types, including inflammation, oxidative stress, macrophages, and bacteriology. Additionally, this review emphasizes the significance of smart hydrogels with responsiveness to external stimuli, as well as conductive hydrogels for promoting wound healing. Lastly, the discussion delves into the advancement of environmentally friendly hydrogels with high biocompatibility, aimed at accelerating the wound healing process.

Biological Macromolecule Hydrogel Based on Recombinant Type I Collagen/Chitosan Scaffold to Accelerate Full-Thickness Healing of Skin Wounds

The development of biological macromolecule hydrogel dressings with fatigue resistance, sufficient mechanical strength, and versatility in clinical treatment is critical for accelerating full-thickness healing of skin wounds. Therefore, in this study, multifunctional, biological macromolecule hydrogels based on a recombinant type I collagen/chitosan scaffold incorporated with a metal-polyphenol structure were fabricated to accelerate wound healing. The resulting biological macromolecule hydrogel possesses sufficient mechanical strength, fatigue resistance, and healing properties, including antibacterial, antioxygenic, self-healing, vascularization, hemostatic, and adhesive abilities. Chitosan and recombinant type I collagen formed the scaffold network, which was the first covalent crosslinking network of the hydrogel. The second physical crosslinking network comprised the coordination of a metal-polyphenol structure, i.e., Cu2+ with the catechol group of dopamine methacrylamide (DMA) and stacking of DMA benzene rings. Double-crosslinked networks are interspersed and intertwined in the hydrogel to reduce the mechanical strength and increase its fatigue resistance, making it more suitable for clinical applications. Moreover, the biological macromolecule hydrogel can continuously release Cu2+, which provides strong antibacterial and vascularization properties. An in vivo full-thickness skin defect model confirmed that multifunctional, biological macromolecule hydrogels based on a recombinant type I collagen/chitosan scaffold incorporated with a metal-polyphenol structure can facilitate the formation of granulation tissue and collagen deposition for a short period to promote wound healing. This study highlights that this biological macromolecule hydrogel is a promising acute wound-healing dressing for biomedical applications.

Mussel-inspired self-healing hydrogel form pectin and cellulose for hemostasis and diabetic wound repairing

Diabetic wound is considered as a kind of chronic wound prone to infection and difficult to repair due to high glucose level in the blood of patients. In this research, a biodegradable self-healing hydrogel with mussel inspired bioadhesion and anti-oxidation properties is fabricated based on Schiff-base cross-linking. The hydrogel was designed from dopamine coupled pectin hydrazide (Pec-DH) and oxidized carboxymethyl cellulose (DCMC) for mEGF loading as a diabetic wound repair dressing. The Pectin and CMC as natural feedstock endowed the hydrogel with biodegradability to avoid possible side effects, while the coupled catechol structure could enhance the tissue adhesion of the hydrogel for hemostasis. The results showed the Pec-DH/DCMC hydrogel formed fast and can cover irregular wounds with good sealing effect. The catechol structure also improved the reactive oxygen species (ROS) scavenging ability of the hydrogel, which can eliminate the negative effect of ROS during wound healing. The in vivo diabetic wound healing experiment revealed the hydrogel as mEGF loading vehicle greatly enhanced the diabetic wound repairing rate in mice model. As a result, the Pec-DH/DCMC hydrogel could show advantages as EGF carrier in wound healing applications.

A Review of Metal Nanoparticles Embedded in Hydrogel Scaffolds for Wound Healing In Vivo

An evolving field, nanotechnology has made its mark in the fields of nanoscience, nanoparticles, nanomaterials, and nanomedicine. Specifically, metal nanoparticles have garnered attention for their diverse use and applicability to dressings for wound healing due to their antimicrobial properties. Given their convenient integration into wound dressings, there has been increasing focus dedicated to investigating the physical, mechanical, and biological characteristics of these nanoparticles as well as their incorporation into biocomposite materials, such as hydrogel scaffolds for use in lieu of antibiotics as well as to accelerate and ameliorate healing. Though rigorously tested and applied in both medical and non-medical applications, further investigations have not been carried out to bring metal nanoparticle-hydrogel composites into clinical practice. In this review, we provide an up-to-date, comprehensive review of advancements in the field, with emphasis on implications on wound healing in in vivo experiments.

A triple-network carboxymethyl chitosan-based hydrogel for hemostasis of incompressible bleeding on wet wound surfaces

Hydrogel is a kind of hemostatic agent with good application prospect. However, the water molecules on the wound made the hydrogel less adhesive to wet wound tissue. Herein, the carboxymethyl chitosan (CMCS)/oxidized dextran (OD)/γ-polyglutamic acid (γ-PGA) hydrogel was prepared using a double-barreled syringe for hemostasis of diffuse and incompressible wound bleeding. The hydrogel formation was based on the intramolecular lactam bonds, intermolecular amide bonds, and Schiff base bonds. In the hydrogel, the super hydrophilic γ-PGA could drain the surface moisture of the wound and create a local dry environment for enhanced surface adhesion. In vivo study showed that the CMCS/ODex/γ-PGA hydrogel possesses a good biosafety and biodegradability. Interestingly, the CMCS/ODex/γ-PGA hydrogel exhibited excellent hemostatic abilities in dynamic humid environment and resisted a high blood pressure of 238 mmHg, which exceeds the threshold systolic blood pressure of healthy adults (i.e., 120 mmHg). Together with the antibacterial and reactive nitrogen species scavenging activities, this study is expected to provide a new method to design the wet-surface adhesives for the efficient hemostatic application.

The diversified hydrogels for biomedical applications and their imperative roles in tissue regeneration

Repair and regeneration of tissues after injury are complex pathophysiological processes. Microbial infection, malnutrition, and an ischemic and hypoxic microenvironment in the injured area can impede the typical healing cascade. Distinguished by biomimicry of the extracellular matrix, high aqueous content, and diverse functions, hydrogels have revolutionized clinical practices in tissue regeneration owing to their outstanding hydrophilicity, biocompatibility, and biodegradability. Various hydrogels such as smart hydrogels, nanocomposite hydrogels, and acellular matrix hydrogels are widely used for applications ranging from bench-scale to an industrial scale. In this review, some emerging hydrogels in the biomedical field are briefly discussed. The protective roles of hydrogels in wound dressings and their diverse biological effects on multiple tissues such as bone, cartilage, nerve, muscle, and adipose tissue are also discussed. The vehicle functions of hydrogels for chemicals and cell payloads are detailed. Additionally, this review emphasizes the particular characteristics of hydrogel products that promote tissue repair and reconstruction such as anti-infection, inflammation regulation, and angiogenesis.

Particles-based medicated wound dressings: a comprehensive review

Wound healing is a dynamic process that is controlled by many factors. The interest in developing wound dressings capable of providing the required environment for the proper wound healing process is ever expanding, and particles occupy a sizable share of the research area. This comprehensive review reports 10 years of research in terms of current advances, delivery system evaluation, outcomes and future directions. The review follows a clearly defined method of article search and screening. Retrieved papers are reviewed regarding the materials, formulation development, and in vitro/in vivo testing of particles-based wound dressings. The review summarized the current status of medicated wound dressing research, identifies gaps to be addressed, and represents a reference for researchers working on wound dressings.

Inorganic-based biomaterials for rapid hemostasis and wound healing

The challenge for the treatment of severe traumas poses an urgent clinical need for the development of biomaterials to achieve rapid hemostasis and wound healing. In the past few decades, active inorganic components and their derived composites have become potential clinical products owing to their excellent performances in the process of hemorrhage control and tissue repair. In this review, we provide a current overview of the development of inorganic-based biomaterials used for hemostasis and wound healing. We highlight the methods and strategies for the design of inorganic-based biomaterials, including 3D printing, freeze-drying, electrospinning and vacuum filtration. Importantly, inorganic-based biomaterials for rapid hemostasis and wound healing are presented, and we divide them into several categories according to different chemistry and forms and further discuss their properties, therapeutic mechanisms and applications. Finally, the conclusions and future prospects are suggested for the development of novel inorganic-based biomaterials in the field of rapid hemostasis and wound healing.

Design of biopolymer-based hemostatic material: Starting from molecular structures and forms

Uncontrolled bleeding remains as a leading cause of death in surgical, traumatic, and emergency situations. Management of the hemorrhage and development of hemostatic materials are paramount for patient survival. Owing to their inherent biocompatibility, biodegradability and bioactivity, biopolymers such as polysaccharides and polypeptides have been extensively researched and become a focus for the development of next-generation hemostatic materials. The construction of novel hemostatic materials requires in-depth understanding of the physiological hemostatic process, fundamental hemostatic mechanisms, and the effects of material chemistry/physics. Herein, we have recapitulated the common hemostatic strategies and development status of biopolymer-based hemostatic materials. Furthermore, the hemostatic mechanisms of various molecular structures (components and chemical modifications) are summarized from a microscopic perspective, and the design based on them are introduced. From a macroscopic perspective, the design of various forms of hemostatic materials, e.g., powder, sponge, hydrogel and gauze, is summarized and compared, which may provide an enlightenment for the optimization of hemostat design. It has also highlighted current challenges to the development of biopolymer-based hemostatic materials and proposed future directions in chemistry design, advanced form and clinical application.

Recent Progress on Hyaluronan-Based Products for Wound Healing Applications

Hyaluronic acid (HA) based nanocomposites are considered excellent for improving wound healing. HA is biocompatible, biodegradable, non-toxic, biologically active, has hemostatic ability, and resists bacterial adhesion. HA-based nanocomposites promote wound healing in four different sequential phases hemostasis, inflammation, proliferation, and maturation. The unique biological characteristics of HA enable it to serve as a drug, an antibacterial agent, and a growth factor, which combine to accelerate the healing process. In this review, we focus on the use of HA-based nanocomposites for wound healing applications and we describe the importance of HA for the wound healing process in each sequential phase, such as hemostasis, inflammation, proliferation, and maturation. Metal nanoparticles (MNPs) or metal oxide nanoparticles (MO-NPs) loaded with HA nanocomposite are used for wound healing applications. Insights into important antibacterial mechanisms are described in HA nanocomposites. Furthermore, we explain antibiotics loaded with HA nanocomposite and its combination with the MNPs/MO-NPs used for wound healing applications. In addition, HA derivatives are discussed and used in combination with the other polymers of the composite for the wound healing process, as is the role of the polymer in wound healing applications. Finally, HA-based nanocomposites used for clinical trials in animal models are presented for wound healing applications.

Effects and Progress of Photo-Crosslinking Hydrogels in Wound Healing Improvement

Wound healing is a dynamic physiological process, including three stages: inflammation, tissue formation, and remodeling. The quality of wound healing is affected by many topical and systemic factors, while any small factor may affect the process. Therefore, improving the quality of wound healing is a complex and arduous challenge. Photo-crosslinking reaction using visible light irradiation is a novel method for hydrogel preparation. Photo-crosslinking hydrogels can be controlled in time and space, and are not interfered by temperature conditions, which have been widely used in the fields of medicine and engineering. This review aims to summarize the application of photo-crosslinking hydrogels in improving the quality of wound healing, mainly including the material design, application mechanism, and effect of photo-crosslinking hydrogels applied in wound healing, followed by the applicable animal models for experimental research. Finally, this review analyzes the clinical application prospects of photo-crosslinking hydrogels in the field of wound healing.

Polymeric biomaterials for wound healing applications: a comprehensive review

Chronic wounds have been a global health threat over the past few decades, requiring urgent medical and research attention. The factors delaying the wound-healing process include obesity, stress, microbial infection, aging, edema, inadequate nutrition, poor oxygenation, diabetes, and implant complications. Biomaterials are being developed and fabricated to accelerate the healing of chronic wounds, including hydrogels, nanofibrous, composite, foam, spongy, bilayered, and trilayered scaffolds. Some recent advances in biomaterials development for healing both chronic and acute wounds are extensively compiled here. In addition, various properties of biomaterials for wound-healing applications and how they affect their performance are reviewed. Based on the recent literature, trilayered constructs appear to be a convincing candidate for the healing of chronic wounds and complete skin regeneration because they mimic the full thickness of skin: epidermis, dermis, and the hypodermis. This type of scaffold provides a dense superficial layer, a bioactive middle layer, and a porous lower layer to aid the wound-healing process. The hydrophilicity of scaffolds aids cell attachment, cell proliferation, and protein adhesion. Other scaffold characteristics such as porosity, biodegradability, mechanical properties, and gas permeability help with cell accommodation, proliferation, migration, differentiation, and the release of bioactive factors.

Knee Osteoarthritis Therapy: Recent Advances in Intra-Articular Drug Delivery Systems

Drug delivery for osteoarthritis (OA) treatment is a continuous challenge because of their poor bioavailability and rapid clearance in joints. Intra-articular (IA) drug delivery is a common strategy and its therapeutic effects depend mainly on the efficacy of the drug-delivery system used for OA therapy. Different types of IA drug-delivery systems, such as microspheres, nanoparticles, and hydrogels, have been rapidly developed over the past decade to improve their therapeutic effects. With the continuous advancement in OA mechanism research, new drugs targeting specific cell/signaling pathways in OA are rapidly evolving and effective drug delivery is critical for treating OA. In this review, recent advances in various IA drug-delivery systems for OA treatment, OA targeted strategies, and related signaling pathways in OA treatment are summarized and analyzed based on current publications.

Changes in Number and Antibacterial Activity of Silver Nanoparticles on the Surface of Suture Materials during Cyclic Freezing

This article presents the results of the 10-fold cyclic freezing (−37.0 °C) and thawing (0.0 °C) effect on the number and size range of silver nanoparticles (AgNPs). AgNPs were obtained by the cavitation-diffusion photochemical reduction method and their sorption on the fiber surface of various suture materials, perlon, silk, and catgut, was studied. The distribution of nanoparticles of different diameters before and after the application of the cyclic freezing/thawing processes for each type of fibers studied was determined using electron microscopy. In general, the present study demonstrates the effectiveness of using the technique of 10-fold cyclic freezing. It is applicable to increase the absolute amount of AgNPs on the surface of the suture material with a simultaneous decrease in the size dispersion. It was also found that the application of the developed technique leads to the overwhelming predominance of nanoparticles with 1 to 15 nm diameter on all the investigated fibers. In addition, it was shown that after the application of the freeze/thaw method, the antibacterial activity of silk and catgut suture materials with AgNPs was significantly higher than before their treatment by cyclic freezing.

Hydrogel-Based Biomaterials Engineered from Natural-Derived Polysaccharides and Proteins for Hemostasis and Wound Healing

Rapid and effective hemostasis is of great importance to improve the quality of treatment and save lives in emergency, surgical practice, civilian, and military settings. Traditional hemostatic materials such as tourniquets, gauze, bandages, and sponges have shown limited efficacy in the management of uncontrollable bleeding, resulting in widespread interest in the development of novel hemostatic materials and techniques. Benefiting from biocompatibility, degradability, injectability, tunable mechanical properties, and potential abilities to promote coagulation, wound healing, and anti-infection, hydrogel-based biomaterials, especially those on the basis of natural polysaccharides and proteins, have been increasingly explored in preclinical studies over the past few years. Despite the exciting research progress and initial commercial development of several hemostatic hydrogels, there is still a significant distance from the desired hemostatic effect applicable to clinical treatment. In this review, after elucidating the process of biological hemostasis, the latest progress of hydrogel biomaterials engineered from natural polysaccharides and proteins for hemostasis is discussed on the basis of comprehensive literature review. We have focused on the preparation strategies, physicochemical properties, hemostatic and wound-healing abilities of these novel biomaterials, and highlighted the challenges that needed to be addressed to achieve the transformation of laboratory research into clinical practice, and finally presented future research directions in this area.

Potential of Nanoparticles Integrated with Antibacterial Properties in Preventing Biofilm and Antibiotic Resistance

Nanotechnology has become an emerging technology in the medical field and is widely applicable for various clinical applications. The potential use of nanoparticles as antimicrobial agents is greatly explored and taken into consideration as alternative methods to overcome the challenges faced by healthcare workers and patients in preventing infections caused by pathogenic microorganisms. Among microorganisms, bacterial infections remain a major hurdle and are responsible for high morbidity and mortality globally, especially involving those with medical conditions and elderly populations. Over time, these groups are more vulnerable to developing resistance to antibiotics, as bacterial biofilms are difficult to destroy or eliminate via antibiotics; thus, treatment becomes unsuccessful or ineffective. Mostly, bacterial biofilms and other microbes can be found on medical devices and wounds where they disperse their contents which cause infections. To inhibit biofilm formations and overcome antibiotic resistance, antimicrobial-loaded nanoparticles alone or combined with other substances could enhance the bactericidal activity of nanomaterials. This includes killing the pathogens effectively without harming other cells or causing any adverse effects to living cells. This review summarises the mechanisms of actions employed by the different types of nanoparticles which counteract infectious agents in reducing biofilm formation and improve antibiotic therapy for clinical usage.

Haemostatic materials for wound healing applications

Wounds are one of the most common health issues, and the cost of wound care and healing has continued to increase over the past decade. The first step in wound healing is haemostasis, and the development of haemostatic materials that aid wound healing has accelerated in the past 5 years. Numerous haemostatic materials have been fabricated, composed of different active components (including natural polymers, synthetic polymers, silicon-based materials and metal-containing materials) and in various forms (including sponges, hydrogels, nanofibres and particles). In this Review, we provide an overview of haemostatic materials in wound healing, focusing on their chemical design and operation. We describe the physiological process of haemostasis to elucidate the principles that underpin the design of haemostatic wound dressings. We also highlight the advantages and limitations of the different active components and forms of haemostatic materials. The main challenges and future directions in the development of haemostatic materials for wound healing are proposed.

Advancements in release-active antimicrobial biomaterials: A journey from release to relief

Escalating medical expenses due to infectious diseases are causing huge socioeconomic pressure on mankind globally. The emergence of antibiotic resistance has further aggravated this problem. Drug-resistant pathogens are also capable of forming thick biofilms on biotic and abiotic surfaces to thrive in a harsh environment. To address these clinical problems, various strategies including antibacterial agent delivering matrices and bactericidal coatings strategies have been developed. In this review, we have discussed various types of polymeric vehicles such as hydrogels, sponges/cryogels, microgels, nanogels, and meshes, which are commonly used to deliver antibiotics, metal nanoparticles, and biocides. Compositions of these polymeric matrices have been elaborately depicted by elucidating their chemical interactions and potential activity have been discussed. On the other hand, various implant/device-surface coating strategies which exploit the release-active mechanism of bacterial killing are discussed in elaboration. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Mussel-inspired adhesive antioxidant antibacterial hemostatic composite hydrogel wound dressing via photo-polymerization for infected skin wound healing

With the increasing prevalence of drug-resistant bacterial infections and the slow healing of chronically infected wounds, the development of new antibacterial and accelerated wound healing dressings has become a serious challenge. In order to solve this problem, we developed photo-crosslinked multifunctional antibacterial adhesive anti-oxidant hemostatic hydrogel dressings based on polyethylene glycol monomethyl ether modified glycidyl methacrylate functionalized chitosan (CSG-PEG), methacrylamide dopamine (DMA) and zinc ion for disinfection of drug-resistant bacteria and promoting wound healing. The mechanical properties, rheological properties and morphology of hydrogels were characterized, and the biocompatibility of these hydrogels was studied through cell compatibility and blood compatibility tests. These hydrogels were tested for the in vitro blood-clotting ability of whole blood and showed good hemostatic ability in the mouse liver hemorrhage model and the mouse-tail amputation model. In addition, it has been confirmed that the multifunctional hydrogels have good inherent antibacterial properties against Methicillin-resistant Staphylococcus aureus (MRSA). In the full-thickness skin defect model infected with MRSA, the wound closure ratio, thickness of granulation tissue, number of collagen deposition, regeneration of blood vessels and hair follicles were measured. The inflammation-related cytokines (CD68) and angiogenesis-related cytokines (CD31) expressed during skin regeneration were studied. All results indicate that these multifunctional antibacterial adhesive hemostatic hydrogels have better healing effects than commercially available Tegaderm™ Film, revealing that they have become promising alternative in the healing of infected wounds.

•

Antibacterial antioxidant adhesion hydrogel was obtained by photopolymerization.

•

These hydrogels exhibited good hemostatic property and cell compatibility.

•

The hydrogels showed good antibacterial property against MRSA.

•

The hydrogels significantly enhanced wound healing of infected skin wound.

Silver Nanoparticles Stable to Oxidation and Silver Ion Release Show Size-Dependent Toxicity In Vivo

Silver nanoparticles (AgNPs) are widely used in commerce, however, the effect of their physicochemical properties on toxicity remains debatable because of the confounding presence of Ag+ ions. Thus, we designed a series of AgNPs that are stable to surface oxidation and Ag+ ion release. AgNPs were coated with a hybrid lipid membrane comprised of L-phosphatidylcholine (PC), sodium oleate (SOA), and a stoichiometric amount of hexanethiol (HT) to produce oxidant-resistant AgNPs, Ag-SOA-PC-HT. The stability of 7-month aged, 20-100 nm Ag-SOA-PC-HT NPs were assessed using UV-Vis, dynamic light scattering (DLS), and inductively coupled plasma mass spectrometry (ICP-MS), while the toxicity of the nanomaterials was assessed using a well-established, 5-day embryonic zebrafish assay at concentrations ranging from 0-12 mg/L. There was no change in the size of the AgNPs from freshly made samples or 7-month aged samples and minimal Ag+ ion release (<0.2%) in fishwater (FW) up to seven days. Toxicity studies revealed AgNP size- and concentration-dependent effects. Increased mortality and sublethal morphological abnormalities were observed at higher concentrations with smaller nanoparticle sizes. This study, for the first time, determined the effect of AgNP size on toxicity in the absence of Ag+ ions as a confounding variable.

Prolonged Usage of an Adhesive Wound Closure Device in Postoperative Facial Scar Management: A Split-Wound Randomized Controlled Trial

Background: Additional skin support is promising in scar management, especially for wounds under high tension. Options for effective skin support are limited. This study aimed to determine whether prolonged use of an adhesive wound closure (AWC) device prevents scar spread and improves final appearance. Patients and Methods: This is a split-wound randomized evaluator-blinded study of 14 patients with facial wounds under high tension. After surgical closure, one half of each wound was randomly allocated to receive either standard care or additional 3-month treatment with an AWC device. Scar width, scar scale, and side effects were evaluated 12 months after surgery. Results: A significant difference was observed in scar width between the treated and nontreated sites at 12-month, with a mean difference of 1.024 (95% confidence interval, 0.347-1.700) mm in favor of the treated group. Scar widths in both groups increased rapidly in the first month after surgery and gradually increased until the sixth month. Scale for vascularization and relief were significantly lower in the treated sites. No significant differences were found in complications between two groups. Conclusions and Relevance: Prolonged usage of the AWC device prevented scar spread at 12 months and improved final scar scores in vascularization and relief. Clinical Trial Registration number: ChiCTR1900027155.

From prevention to diagnosis and treatment: Biomedical applications of metal nanoparticle-hydrogel composites

Recent advances in biomaterials integrate metal nanoparticles with hydrogels to generate composite materials that exhibit new or improved properties. By precisely controlling the composition, arrangement and interactions of their constituents, these hybrid materials facilitate biomedical applications through myriad approaches. In this work we seek to highlight three popular frameworks for designing metal nanoparticle-hydrogel hybrid materials for biomedical applications. In the first approach, the properties of metal nanoparticles are incorporated into a hydrogel matrix such that the composite is selectively responsive to stimuli such as light and magnetic flux, enabling precisely activated therapeutics and self-healing biomaterials. The second approach mediates the dynamic reorganization of metal nanoparticles based on environment-directed changes in hydrogel structure, leading to chemosensing, microbial and viral detection, and drug-delivery capabilities. In the third approach, the hydrogel matrix spatially arranges metal nanoparticles to produce metamaterials or passively enhance nanoparticle properties to generate improved substrates for biomedical applications including tissue engineering and wound healing. This article reviews the construction, properties and biomedical applications of metal nanoparticle-hydrogel composites, with a focus on how they help to prevent, diagnose and treat diseases. Discussion includes how the composites lead to new or improved properties, how current biomedical research leverages these properties and the emerging directions in this growing field.

A graphene hybrid supramolecular hydrogel with high stretchability, self-healable and photothermally responsive properties for wound healing

Wound healing is a ubiquitous healthcare problem in clinical wound management. In this paper, the fabrication of a graphene hybrid supramolecular hydrogel (GS hydrogel) for wound dressing applications is demonstrated. The hydrogel is composed of two components, including N-acryloyl glycinamide (NAGA) as the scaffold and graphene as the photothermally responsive active site for photothermal therapy. Based on the multiple hydrogen bonds between the dual amide motifs in the side chain of N-acryloyl glycinamide, the hydrogel exhibits high tensile strength (≈1.7 MPa), good stretchability (≈400%) and self-recoverability. In addition, the GS hydrogel shows excellent antibacterial activity towards methicillin-resistant Staphylococcus aureus (MRSA), benefiting from the addition of graphene that possesses great photothermal transition activity (≈85%). Significantly, in vivo animal experiments also demonstrated that the GS hydrogel effectively accelerates the wound healing processes by eradicating microbes, promoting collagen deposition and angiogenesis. In summary, this GS hydrogel demonstrates excellent mechanical performance, photothermal antimicrobial activity, and promotes skin tissue regeneration, and so has great application potential as a promising wound dressing material in clinical use.

The application possibility of acellular dermal matrix decorated with nano-silver in the reconstruction of contaminated abdominal wall

Acellular dermal matrix (ADM) is a biomaterial, which commonly used for repair of tissue defects; however, infection is the main factor underlying the failure of treatments involving ADM. To enhance the anti-infection ability of ADM, we constructed a new form of ADM that was decorated with nano-silver ('NS-ADM'). The introduction of nano-silver did not destroy the decellularized structure of ADM, and no significant difference was detected with regards to the maximum tensile force when compared between NS-ADM and ADM (P = 0.351). NS-ADM was not cytotoxic to cell growth when the concentration of nano-silver solution ≤ 25 ppm and exhibited strong antibacterial activity in vitro. Besides, when rats were inoculated with 104 CFU/mL, there were significantly lower bacterial counts in the NS-ADM group than in the ADM group when assessed seven days after surgery (P = 0.047); no significant differences were detected on days 14 and 28. Although there were no significant differences in bacterial counts on days 7, 14, or 21 between the two groups (rats were inoculated with 106 CFU/mL), the number of rats showing reduced bacterial counts or clearing was higher in the NS-ADM group than in the ADM group. Rats that were inoculated with 108 CFU/mL showed repair failure. Overall, NS-ADM is a promising antibacterial biomaterial for repairing contaminated soft-tissue defects, in which antibacterial properties are superior to ADM. The antibacterial activity of NS-ADM was limited for severe infections, and further in vivo studies are needed to evaluate its efficacy and biosafety.

Niacin Metal-Organic Framework-Laden Self-Healing Hydrogel for Wound Healing

Bacterial infection is one of the most significant impediments to wound healing. To treat wounds, non-biological and non-pharmacological interventions have gained increasing importance as they are easily translatable into clinical products. In this study, we developed a niacin metal-organic frameworks (NOFs)-laden hybrid hydrogel with self-healing ability for better wound healing. The copper based-NOFs (Cu-NOFs) and zinc based-NOFs (Zn-NOFs) were constructed and encapsulated into the self-healing hydrogels, which could prevent NOFs from directly interacting with protein-containing solutions (e. g., tissue fluid). The hydrogel was prepared by using four-armed benzaldehyde-terminated polyethylene glycol (BAPEG) and carboxymethyl chitosan (CMC). Our results showed that the hydrogel gained self-healing ability through reversible Schiff base reaction. In addition, after loading NOFs, the hybrid hydrogel exerted significant effects on antibacterial and antioxidant activities. The in vivo studies demonstrated that the hybrid hydrogel could alleviate inflammation and enhance the formation of granulation tissue, collagen and vascular tissue, thereby promoting wound closure in rats with E. coli -infected wounds. Overall, this study highlights the tremendous potential for the clinical implementation of NOFs-laden hydrogel with good self-healing, antibacterial and antioxidant properties in wound healing.