Lipids as Activators of Innate Immunity in Peptide Vaccine Delivery

BACKGROUND

Innate immune system plays an important role in pathogen detection and the recognition of vaccines, mainly through pattern recognition receptors (PRRs) that identify pathogen components (danger signals). One of the typically recognised bacterial components are lipids in conjugation with peptides, proteins and saccharides. Lipidic compounds are readily recognised by the immune system, and thus are ideal candidates for peptide- based vaccine delivery. Thus, bacterial or synthetic lipids mixed with, or conjugated to, antigens have shown adjuvant properties. These systems have many advantages over traditional adjuvants, including low toxicity and good efficacy for stimulating mucosal and systemic immune responses.

METHODS

The most recent literature on the role of lipids in stimulation of immune responses was selected for this review. The vast majority of reviewed papers were published in the last decade. Older but significant findings are also cited.

RESULTS

This review focuses on the development of lipopeptide vaccine systems including application of palmitic acid, bacterial lipopeptides, glycolipids and the lipid core peptide and their routes of administration. The use of liposomes as a delivery system that incorporates lipopeptides is discussed. The review also includes a brief description of immune system in relation to vaccinology and discussion on vaccine delivery routes.

CONCLUSION

Lipids and their conjugates are an ideal frontrunner in the development of safe and efficient vaccines for different immunisation routes.

Cholic Acid-based Delivery System for Vaccine Candidates against Group A Streptococcus

Peptide-based subunit vaccines require an immunostimulant (adjuvant) and/or delivery system to protect the antigenic peptide from degradation and induce the desired immunity. Currently available adjuvants are either too toxic for human use (experimental adjuvants) or they are limited for use in particular vaccines or licensed countries (commercial adjuvants). Therefore, there is an immediate need for novel adjuvants that are both safe and effective. Herein, we assessed the ability of cholic acid (a major bile acid) as a nontoxic, biodegradable, human-derived, potent vaccine delivery system. An antigenic peptide derived from Group A Streptococcus was conjugated to hydrophobic cholic acid via solid phase peptide synthesis to produce lipopeptide that self-assembled into rod-like nanoparticles under aqueous conditions. Following intranasal immunization in mice, this lipopeptide was capable of inducing the production of opsonic epitope-specific antibodies on its own and in liposomal formulation. The cholic acid-based conjugate induced significantly stronger humoral immune responses than cholera toxin-based adjuvant. Thus, we demonstrated, for the first time, capability of the human-derived lipid to act as a built-in immunoadjuvant for vaccines.

Recent Advances in the Development of Peptide Vaccines and Their Delivery Systems Against Group A Streptococcus

Group A Streptococcus (GAS) infection can cause a variety of diseases in humans, ranging from common sore throats and skin infections, to more invasive diseases and life-threatening post-infectious diseases, such as rheumatic fever and rheumatic heart disease. Although research has been ongoing since 1923, vaccines against GAS are still not available to the public. Traditional approaches taken to develop vaccines for GAS failed due to poor efficacy and safety. Fortunately, headway has been made and modern subunit vaccines that administer minimal bacterial components provide an opportunity to finally overcome previous hurdles in GAS vaccine development. This review details the major antigens and strategies used for GAS vaccine development. The combination of antigen selection, peptide epitope modification and delivery systems have resulted in the discovery of promising peptide vaccines against GAS; these are currently in preclinical and clinical studies.

Intranasal delivery of nanoparticle-based vaccines

Most pathogens gain access to the human body and initiate systemic infections through mucosal sites. A large number of currently marketed licensed vaccines are parenterally administered; they generate strong systemic immunity but not mucosal immunity. Nasal vaccination is an appealing strategy for the induction of mucosal-specific immunity; however, its development is mostly challenged by several factors, such as inefficient antigen uptake, its rapid mucociliary clearance, size-restricted permeation across epithelial barriers and absence of safe human mucosal adjuvants. Therefore, a safer mucosal-adjuvanting strategy or efficient mucosal delivery platform is much warranted. This review summarizes challenges and the rationale for nasal vaccine development with a special focus on the use of nanoparticles based on polymers and lipids for mucosal vaccine delivery.

Linear and branched polyacrylates as a delivery platform for peptide-based vaccines

AIM

Peptide-based vaccines are designed to carry the minimum required antigen to trigger the desired immune responses; however, they are usually poorly immunogenic and require appropriate delivery system.

RESULTS

Peptides, B-cell epitope (J14) derived from group A streptococcus M-protein and universal T-helper (PADRE) epitope, were conjugated to a variety of linear and branched polyacrylates. All produced conjugates formed submicron-sized particles and induced a high level of IgG titres in mice after subcutaneous immunization. These polymer-peptide conjugates demonstrated high opsonization capacity against group A streptococcus clinical isolates.

CONCLUSION

We have successfully demonstrated that submicron-sized polymer-peptide conjugates were capable of inducing strong humoral immune responses after single immunization.

Induction of high titred, non-neutralising antibodies by self-adjuvanting peptide epitopes derived from the respiratory syncytial virus fusion protein

Respiratory syncytial virus (RSV) causes severe lower respiratory tract illness in infants and young children. The significant morbidity and mortality rates associated with RSV infection make an effective RSV vaccine development a priority. Two neutralising antibody binding sites, Ø and II, located on the pre-fusion RSV F glycoprotein are prime candidates for epitope-focused vaccine design. We report on a vaccine strategy that utilises a lipid core peptide (LCP) delivery system with self-adjuvanting properties in conjunction with either the antigenic site Ø or II (B cell epitopes) along with PADRE as a T helper cell epitope. These LCP constructs adopted the desired helical conformation in solution and were recognised by their cognate antibodies D25 and Motavizumab, specific for site Ø and II on RSV F protein, respectively. The LCP constructs were capable of eliciting higher levels of antigen specific antibodies than those induced by antigens administered with complete Freund's adjuvant, demonstrating the potent adjuvanting properties of LCP delivery. However, the antibodies induced failed to recognise native F protein or neutralise virus infectivity. These results provide a note of caution in assuming that peptide vaccines, successfully designed to structurally mimic minimal linear B cell epitopes, will necessarily elicit the desired immune response.

Bivalent mucosal peptide vaccines administered using the LCP carrier system stimulate protective immune responses against Streptococcus pyogenes infection

Despite the broad knowledge about the pathogenicity of Streptococcus pyogenes there is still a controversy about the correlate of protection in GAS infections. We aimed in further improving the immune responses stimulated against GAS comparing different vaccine formulations including bis-(3',5')-cyclic dimeric adenosine monophosphate (c-di-AMP) and BPPCysMPEG, a derivative of the macrophage-activating lipopeptide (MALP-2), as adjuvants, respectively, to be administered with and without the universal T helper cell epitope P25 along with the optimized B cell epitope J14 of the M protein and B and T cell epitopes of SfbI. Lipopeptide based nano carrier systems (LCP) were used for efficient antigen delivery across the mucosal barrier. The stimulated immune responses were efficient in protecting mice against a respiratory challenge with a lethal dose of a heterologous S. pyogenes strain. Moreover, combination of the LCP based peptide vaccine with c-di-AMP allowed reduction of antigen dose at the same time maintaining vaccine efficacy.

Cell membrane-derived nanomaterials for biomedical applications

The continued evolution of biomedical nanotechnology has enabled clinicians to better detect, prevent, manage, and treat human disease. In order to further push the limits of nanoparticle performance and functionality, there has recently been a paradigm shift towards biomimetic design strategies. By taking inspiration from nature, the goal is to create next-generation nanoparticle platforms that can more effectively navigate and interact with the incredibly complex biological systems that exist within the body. Of great interest are cellular membranes, which play essential roles in biointerfacing, self-identification, signal transduction, and compartmentalization. In this review, we explore the major ways in which researchers have directly leveraged cell membrane-derived biomaterials for the fabrication of novel nanotherapeutics and nanodiagnostics. Such emerging technologies have the potential to significantly advance the field of nanomedicine, helping to improve upon traditional modalities while also enabling novel applications.

The application of self-assembled nanostructures in peptide-based subunit vaccine development

•

Smaller polymer-peptide conjugates-based nanoparticles are often more immunogenic.

•

Lipid-antigen conjugates-based nanoparticles can interact with immune receptors.

•

Peptides with β-sheet conformation usually form nanofibers.

•

α-Helical and random coil peptides tend to self-assemble into nanoparticles.

•

Peptide-based nanostructures are usually poorer inducers of immune responses.

Peptide based-vaccines are becoming one of the most widely investigated prophylactic and therapeutic health care interventions against a variety of diseases, including cancer. However, the lack of a safe and highly efficient adjuvant (immune stimulant) is regarded as the biggest obstacle to vaccine development. The incorporation of a peptide antigen in a nanostructure-based delivery system was recently shown to overcome this obstacle. Nanostructures are often formed from antigens conjugated to molecules such as polymers, lipids, and peptide, with the help of self-assembly phenomenon. This review describes the application of self-assembly process for the production of peptide-based vaccine candidates and the ability of these nanostructures to stimulate humoral and cellular immune responses.

Group A Streptococcal vaccine candidate: contribution of epitope to size, antigen presenting cell interaction and immunogenicity

Aim: Utilize lipopeptide vaccine delivery system to develop a vaccine candidate against Group A Streptococcus. Materials & methods: Lipopeptides synthesized by solid-phase peptide synthesis-bearing carboxyl (C)-terminal and amino (N)-terminal Group A Streptococcus peptide epitopes. Nanoparticles formed were evaluated in vivo. Results: Immune responses were induced in mice without additional adjuvant. We demonstrated for the first time that incorporation of the C-terminal epitope significantly enhanced the N-terminal epitope-specific antibody response and correlated with forming smaller nanoparticles. Antigen-presenting cells had increased uptake and maturation by smaller, more immunogenic nanoparticles. Antibodies raised by vaccination recognized isolates. Conclusion: Demonstrated the lipopeptidic nanoparticles to induce an immune response which can be influenced by the combined effect of epitope choice and size.

Recent advances in peptide-based subunit nanovaccines

Vaccination is the most efficient way to protect humans against pathogens. Peptide-based vaccines offer several advantages over classical vaccines, which utilized whole organisms or proteins. However, peptides alone are not immunogenic and need a delivery system that can boost their recognition by the immune system. In recent years, nanotechnology-based approaches have become one of the most promising strategies in peptide vaccine delivery. This review summarizes knowledge on peptide vaccines and nanotechnology-based approaches for their delivery. The recently reported nano-sized delivery platforms for peptide antigens are reviewed, including nanoparticles composed of polymers, peptides, lipids, inorganic materials and nanotubes. The future prospects for peptide-based nanovaccines are discussed.

Self-adjuvanting vaccine against group A streptococcus: application of fibrillized peptide and immunostimulatory lipid as adjuvant

Peptides are of great interest to be used as vaccine antigens due to their safety, ease of manufacturing and specificity in generating immune response. There have been massive discoveries of peptide antigens over the past decade. However, peptides alone are poorly immunogenic, which demand co-administration with strong adjuvant to enhance their immunogenicity. Recently, fibril-forming peptides such as Q11 and lipoamino acid-based carrier have been identified to induce substantial immune responses when covalently linked to peptide epitope. In this study, we have incorporated either Q11 or lipoamino acids to a peptide epitope (J14) derived from M protein of group A streptococcus to develop self-adjuvanting vaccines. J14, Q11 and lipoamino acids were also conjugated together in a single vaccine construct in an attempt to evaluate the synergy effect of combining multiple adjuvants. Physicochemical characterization demonstrated that the vaccine constructs folded differently and self-assembled into nanoparticles. Significantly, only vaccine constructs containing double copies of lipoamino acids (regardless in conjugation with Q11 or not) were capable to induce significant dendritic cells uptake and subsequent J14-specific antibody responses in non-sizes dependent manners. Q11 had minimal impact in enhancing the immunogenicity of J14 even when it was used in combination with lipoamino acids. These findings highlight the impact of lipoamino acids moiety as a promising immunostimulant carrier and its number of attachment to peptide epitope was found to have a profound effect on the vaccine immunogenicity.

Lipid core peptide targeting the cathepsin D hemoglobinase of Schistosoma mansoni as a component of a schistosomiasis vaccine

The self-adjuvanting lipid core peptide (LCP) system offers a safe alternative vaccine delivery strategy, eliminating the need for additional adjuvants such as CpG Alum. In this study, we adopted the LCP as a scaffold for an epitope located on the surface of the cathepsin D hemoglobinase (Sm-CatD) of the human blood fluke Schistosoma mansoni. Sm-CatD plays a pivotal role in digestion of the fluke's bloodmeal and has been shown to be efficacious as a subunit vaccine in a murine model of human schistosomiasis. Using molecular modeling we showed that S. mansoni cathepsin D possesses a predicted surface exposed α-helix (A₂₆₃K) that corresponds to an immunodominant helix and target of enzyme-neutralizing antibodies against Necator americanus APR-1 (Na-APR-1), the orthologous protease and vaccine antigen from blood-feeding hookworms. The A₂₆₃K epitope was engineered as two peptide variants, one of which was flanked at both termini with a coil maintaining sequence, thereby promoting the helical characteristics of the native A₂₆₃K epitope. Some of the peptides were fused to a self-adjuvanting lipid core scaffold to generate LCPs. Mice were vaccinated with unadjuvanted peptides, peptides formulated with Freund's adjuvants, or LCPs. Antibodies generated to LCPs recognized native Sm-CatD within a soluble adult schistosome extract, and almost completely abolished its enzymatic activity in vitro. Using immunohistochemistry we showed that anti-LCP antibodies bound to the native Sm-CatD protein in the esophagus and anterior regions of the gastrodermis of adult flukes. Vaccines offer an alternative control strategy in the fight against schistosomiasis, and further development of LCPs containing multiple epitopes from this and other vaccine antigens should become a research priority.

Peptide conjugation via CuAAC 'click' chemistry

The copper (I)-catalyzed alkyne azide 1,3-dipolar cycloaddition (CuAAC) or ‘click’ reaction, is a highly versatile reaction that can be performed under a variety of reaction conditions including various solvents, a wide pH and temperature range, and using different copper sources, with or without additional ligands or reducing agents. This reaction is highly selective and can be performed in the presence of other functional moieties. The flexibility and selectivity has resulted in growing interest in the application of CuAAC in various fields. In this review, we briefly describe the importance of the structural folding of peptides and proteins and how the 1,4-disubstituted triazole product of the CuAAC reaction is a suitable isoster for an amide bond. However the major focus of the review is the application of this reaction to produce peptide conjugates for tagging and targeting purpose, linkers for multifunctional biomacromolecules, and reporter ions for peptide and protein analysis.

From rationally designed polymeric and peptidic systems to sophisticated gene delivery nano-vectors

Lack of safe, efficient and controllable methods for delivering therapeutic genes appears to be the most important factor preventing human gene therapy. Safety issues encountered with viral vectors have prompted substantial attention to in vivo investigations with non-viral vectors throughout the past decade. However, developing non-viral vectors with effectiveness comparable to viral ones has been a challenge. The strategy of designing multifunctional synthetic carriers targeting several extracellular and intracellular barriers in the gene transfer pathway has emerged as a promising approach to improving the efficacy of gene delivery systems. This review will explain how sophisticated synthetic vectors can be created by combining conventional polycationic vectors such as polyethylenimine and basic amino acid peptides with additional polymers and peptides that are designed to overcome potential barriers to the gene delivery process.