Unveiling singlet oxygen spin trapping in catalytic oxidation processes using in situ kinetic EPR analysis

Fluoride ions enhanced cobalt ferrite for peroxymonosulfate activation with efficient performance and active oxygen yield regulation

The activation of peroxymonosulfate (PMS) by cobalt-based catalysts for the degradation of organic pollutants has been widely studied, while the role of coexisting anions has received little attention. In this study, the performance of atrazine (ATZ) degradation by the addition of fluoride ions (F-) in the activation of PMS by cobalt ferrite (CoFe2O4) was investigated. The addition of F- to the CoFe2O4/PMS system increased ATZ degradation effect from 82 % to 98 % within 10 min, and the rate increased from 0.172 min-1 to 0.431 min-1. At the same time, F- could also enhance the degradation of organic substances such as sulfamethoxazole (SMX), ibuprofen, and iohexol. Based on generating SO4•-, HO• and Co(IV)=O in the CoFe2O4/PMS system, F- enhanced the generation of SO4•-. When coexisting with common substances in water (i.e., inorganic anions, humic acid, hemoglobin and dextran), F- can still increase the reaction rate and reduce their negative impacts. Ion dissolution and control tests verified Co as a valid active site. A potential reaction mechanism was proposed for the complex Co(II)F formation with Co by F-, which enhanced the activation of the PMS by CoFe2O4 and regulated the active species. Finally, it was verified that the low concentration of F- could enhance ATZ degradation within two hours and the remaining F- could be effectively removed by flocculation and precipitation. This research takes utilization of F- in wastewater to promote advanced oxidation processes based on PMS, which provides a new direction for the treatment of actual water pollution.

Liquid Metal Amplified Charge Separation in Photocatalytic Micro/Nanomotors for Antibacterial Therapy

Photocatalytic micro/nanomotors (MNMs) driven by electrophoresis have attracted considerable attention by virtue of their active mobility and versatile functionality. However, the rapid recombination of photogenerated electron-hole pairs on light illumination severely compromises the involvement of charge species in the catalytic redox reactions of fuels, thus hindering both the propulsion and the application performance of photocatalytic MNMs. Herein, we report a facile strategy to amplify charge separation by incorporating liquid metal (LM) into the construction of photocatalytic MNMs, thereby strengthening the electrophoretic propulsion of MNMs and promoting the generation of reactive oxygen species (ROS) for antibacterial application. The MNMs are constructed with a gallium (Ga) LM core, coated with abundant graphite-phase carbon nitride (g-C3N4) nanosheets and half covered by a thin platinum layer. These MNMs exhibit self-propulsion in hydrogen peroxide (H2O2) solution, with their motion dynamics further enhanced by light irradiation. Theoretical calculations and simulations reveal that the composition between Ga and g-C3N4 forms an ohmic junction in the electronic energy band structure, which effectively improves the charge separation efficiency of electron-hole pairs. These results align well with the experimental electrochemical tests and consequently intensify the catalytic redox reactions of H2O2, as well as accelerate the charge migration across MNMs, contributing to the enhancement of their propulsion performance. Simultaneously, the amplified separation of electrons facilitates increased ROS generation, empowering the MNMs with motion-enhanced antibacterial activity against Escherichia coli. Finally, an in vivo wound healing experiment is conducted, verifying the superior antibacterial therapeutic performance of photocatalytic MNMs. This work not only provides insights into the role of charge species in phoretic motion of MNMs but also gives inspiration for developing photocatalytic MNMs with advanced biomedical applications.

Identifying the Key Photosensitizing Factors over Metal-Organic Frameworks for Selective Control of 1O2 and O2⋅- Generation

The reaction pathway, product selectivity and catalytic efficiency of photo-oxidation are highly dependent on the specific reactive oxygen species (ROS), such as singlet oxygen (1O2) and superoxide (O2⋅-), generated via the sensitization of O2 by photosensitizers. Studies on uncovering the role of photosensitizing factors on the selective control of 1O2 and O2⋅- generation are significant but remain underexplored. Here, we constructed a photosensitizing metal-organic framework molecular platform (UiO-1-UiO-4) by elaborately engineering Ir(III) complex ligands with pyrenyl group for modulating photosensitizing factors and elucidating their impact on ROS generation. Impressively, the ratios of 1O2 and O2⋅- generation varied from 0 : 100 for UiO-1 to 94 : 6 for UiO-4 by modulating photosensitizing factors. UiO-2 and UiO-4 were respectively immobilized in a continuous-flow reactor, achieving gram-scale photosynthesis of phenol and juglone with high purity (>94 %) via O2⋅- and 1O2 pathway, respectively. Investigations reveal that UiO-4 with ligand localized excited state and long excited state lifetime contributed to triggering energy transfer to afford 1O2, whereas UiO-1 with charge-transfer state and negative reduction potential facilitates charge transfer to produce O2⋅-. This work offers a novel insight into regulating ROS generation by modulating the photosensitizing factors at the molecular level.

Heterogeneous Peroxymonosulfate-Based Advanced Oxidation Mechanisms: New Wine in Old Bottles?

Heterogeneous persulfate-based advanced oxidation processes (PS-AOPs) have been gaining significant attention in water/wastewater treatment; however, the elucidation of mechanisms in PS-AOPs has become increasingly complex as the understanding of potential reactive pathways expands and the rigor of corresponding characterizations intensifies. As such, accurately illustrating system mechanisms with a robust and convincing methodology is crucial, while the influence of substrates must not be overlooked. In this Perspective, established techniques and critical issues are systematically compiled to serve as practical guidelines. Additionally, a newly proposed pathway, the direct oxidation transfer process (DOTP), is discussed in comparison to conventional mineralization processes by reactive oxidative species (ROS) in PS-AOPs. Overall, the investigation of PS-AOP mechanisms across various heterogeneous systems remains contentious and calls for standardization, for which this work aims to serve as a valuable reference.

Constructing a Graphene-like Layered Carbocatalyst by the Dual Templating Effect for an Efficient Fenton-like Reaction

Two-dimensional (2D) carbon materials are receiving increasing attention due to their partly groundbreaking performance in catalysis and electrochemistry based on distinct physiochemical and textural properties. We focus on the challenge to directly achieve a well-developed layered morphology with a high doping level of heteroatoms as the active sites, a standard conflict of interests of high-temperature synthesis. Here, we report a dual-templating strategy to yield graphene-like layered carbon (GLC) by direct carbonization of a texturally prealigned zeolitic imidazolate framework-8 (ZIF-8). The recrystallization of ZIF-8 in an aqueous NaCl solution discloses a 2D packing mode that was retained after freeze-drying with recrystallized NaCl as an exotemplate and a space-confining nanoreactor. Further promoted by the chemical interaction of NaCl in promoting and stabilizing the carbonization process, the final product came with a well-separated layered morphology and high amounts of heteroatoms (16.6 wt % N and 7.5 wt % O). The structurally and catalytically special GLC functioned well in activating peroxymonosulfate-based Fenton-like reactions. It was shown that the reaction proceeded via nonfree-radical-mediated pathways, as reflected in significantly enhanced electron-transfer processes and ultrafast kinetics for pollutant removal. The proposed strategy is expected to afford a broader applicability for the bottom-up design of 2D carbon materials.

Carbonaceous materials in structural dimensions for advanced oxidation processes

Carbonaceous materials have attracted extensive research and application interests in water treatment owing to their advantageous structural and physicochemical properties. Despite the significant interest and ongoing debates on the mechanisms through which carbonaceous materials facilitate advanced oxidation processes (AOPs), a systematic summary of carbon materials across all dimensions (0D-3D nanocarbon to bulk carbon) in various AOP systems remains absent. Addressing this gap, the current review presents a comprehensive analysis of various carbon/oxidant systems, exploring carbon quantum dots (0D), nanodiamonds (0D), carbon nanotubes (1D), graphene derivatives (2D), nanoporous carbon (3D), and biochar (bulk 3D), across different oxidant systems: persulfates (peroxymonosulfate/peroxydisulfate), ozone, hydrogen peroxide, and high-valent metals (Mn(VII)/Fe(VI)). Our discussion is anchored on the identification of active sites and elucidation of catalytic mechanisms, spanning both radical and nonradical pathways. By dissecting catalysis-related factors such as sp2/sp3 C, defects, and surface functional groups that include heteroatoms and oxygen groups in different carbon configurations, this review aims to provide a holistic understanding of the catalytic nature of different dimensional carbonaceous materials in AOPs. Furthermore, we address current challenges and underscore the potential for optimizing and innovating water treatment methodologies through the strategic application of carbon-based catalysts. Finally, prospects for future investigations and the associated bottlenecks are proposed.

An Albumin-Photosensitizer Supramolecular Assembly with Type I ROS-Induced Multifaceted Tumor Cell Deaths for Photodynamic Immunotherapy

Photodynamic therapy holds great potentials in cancer treatment, yet its effectiveness in hypoxic solid tumor is limited by the oxygen-dependence and insufficient oxidative potential of conventional type II reactive oxygen species (ROS). Herein, the study reports a supramolecular photosensitizer, BSA@TPE-BT-SCT NPs, through encapsulating aggregation-enhanced emission photosensitizer by bovine serum albumin (BSA) to significantly enhance ROS, particularly less oxygen-dependent type I ROS for photodynamic immunotherapy. The abundant type I ROS generated by BSA@TPE-BT-SCT NPs induce multiple forms of programmed cell death, including apoptosis, pyroptosis, and ferroptosis. These multifaceted cell deaths synergistically facilitate the release of damage-associated molecular patterns and antitumor cytokines, thereby provoking robust antitumor immunity. Both in vitro and in vivo experiments confirmed that BSA@TPE-BT-SCT NPs elicited the immunogenic cell death, enhance dendritic cell maturation, activate T cell, and reduce myeloid-derived suppressor cells, leading to the inhibition of both primary and distant tumors. Additionally, BSA@TPE-BT-SCP NPs also exhibited excellent antitumor performance in a humanized mice model, evidenced by a reduction in senescent T cells among these activated T cells. The findings advance the development of robust type I photosensitizers and unveil the important role of type I ROS in enhancing multifaceted tumor cell deaths and antitumor immunogenicity.

Different Inactivation Mechanisms of Staphylococcus aureus and Escherichia coli in Water by Reactive Oxygen and Nitrogen Species Generated from an Argon Plasma Jet

The atmospheric pressure plasma jet (APPJ) is a promising technology for inactivating waterborne pathogens by generating diverse reactive species under ambient conditions. However, uncertainties regarding the bacterial inactivation mechanisms persist due to varying findings in prior research. This study aimed to clarify the inactivation mechanisms of two representative bacteria, Staphylococcus aureus (S. aureus, Gram-positive) and Escherichia coli (E. coli, Gram-negative), using an argon-based APPJ (Ar-APPJ) system in a controlled medium, primarily deionized water. We identified several reactive oxygen and nitrogen species (RONS), including hydrogen peroxide, peroxynitrous acid/peroxynitrite (ONOOH/ONOO-), hydroxyl radical (•OH), and hydroperoxyl radical/superoxide radical, and evaluated their roles in bacterial inactivation. Inactivation experiments and quantification of suspected RONS revealed that ONOOH was the primary lethal agent for S. aureus, while •OH predominantly inactivated E. coli. Assessment of cell membrane integrity and intracellular RONS levels showed that E. coli, with its thinner cell wall, was more vulnerable to surface damage caused by •OH. In contrast, for S. aureus, with its thicker cell wall, intracellular attack by penetrated ONOOH, being significantly more diffusive than •OH, was more effective, as •OH alone could not induce sufficient surface damage. These findings advance our understanding of bacterial inactivation by the Ar-APPJ and provide valuable insights for designing effective water disinfection strategies utilizing this technology.

Enhancement of peroxymonosulfate activation with nickel foam-supported CuCo2O4 for tetracycline degradation: Performance and mechanism insights

The modulation of bimetallic oxide structures and development of efficient, easily recoverable catalysts are expected to effectively overcome the limitations associated with powdered catalysts in activating peroxymonosulfate (PMS). In this study, CuCo2O4 was successfully immobilized on the surface of nickel foam (NF) via an electrodeposition-calcination procedure, with highly efficient activation of PMS for tetracycline (TC) degradation (0.55 min-1). Besides acting as a support carrier and providing ample active sites, NF mediated electron transport, prevented the leaching of metal ions and enhanced the efficiency of recycling. Density functional theory (DFT) calculations and experimental tests illustrated that Cu/Co dual-sites can efficiently adsorb PMS, enabling simultaneous reduction and oxidation reactions. The dual-site synergy substantially decreased the adsorption barrier and increased the electron transfer rate. Especially, the Cu+/Cu2+ redox couple acted as an electron donor and facilitated rapid charge transfer, leading to the conversion of Co3+ to Co2+. Moreover, the CuCo2O4@NF + PMS system effectively eliminated TC by employing radical pathways (SO4•-, •OH) and nonradical processes (1O2, e-). Therefore, this study introduces a new approach to overcome the limitations of powdered bimetallic oxides, providing a promising solution for practical applications.

Hidden route of protein damage through oxygen-confined photooxidation

Oxidative modifications can disrupt protein folds and functions, and are strongly associated with human aging and diseases. Conventional oxidation pathways typically involve the free diffusion of reactive oxygen species (ROS), which primarily attack the protein surface. Yet, it remains unclear whether and how internal protein folds capable of trapping oxygen (O2) contribute to oxidative damage. Here, we report a hidden pathway of protein damage, which we refer to as O2-confined photooxidation. In this process, O2 is captured in protein cavities and subsequently converted into multiple ROS, primarily mediated by tryptophan residues under blue light irradiation. The generated ROS then attack the protein interior through constrained diffusion, causing protein damage. The effects of this photooxidative reaction appear to be extensive, impacting a wide range of cellular proteins, as supported by whole-cell proteomic analysis. This photooxidative mechanism may represent a latent oxidation pathway in human tissues directly exposed to visible light, such as skin and eyes.

Confronting the Mysteries of Oxidative Reactive Species in Advanced Oxidation Processes: An Elephant in the Room

Advanced oxidation processes (AOPs) are rapidly evolving but still lack well-established protocols for reliably identifying oxidative reactive species (ORSs). This Perspective presents both the radical and nonradical ORSs that have been identified or proposed, along with the extensive controversies surrounding oxidative mechanisms. Conventional identification tools, such as quenchers, probes, and spin trappers, might be inadequate for the analytical demands of systems in which multiple ORSs coexist, often yielding misleading results. Therefore, the challenges of identifying these complex, short-lived, and transient ORSs must be fully acknowledged. Refining analytical methods for ORSs is necessary, supported by rigorous experiments and innovative paradigms, particularly through kinetic analysis based on in situ spectroscopic techniques and multiple-probe strategies. To demystify these complex ORSs, future efforts should be made to develop advanced tools and strategies to enhance the mechanism understanding. In addition, integrating real-world conditions into experimental designs will establish a reliable framework in fundamental studies, providing more accurate insights and effectively guiding the design of AOPs.

Harnessing air-water interface to generate interfacial ROS for ultrafast environmental remediation

The air-water interface of microbubbles represents a crucial microenvironment that can dramatically accelerate reactive oxidative species (ROS) reactions. However, the dynamic nature of microbubbles presents challenges in probing ROS behaviors at the air-water interface, limiting a comprehensive understanding of their chemistry and application. Here we develop an approach to investigate the interfacial ROS via coupling microbubbles with a Fenton-like reaction. Amphiphilic single-Co-atom catalyst (Co@SCN) is employed to efficiently transport the oxidant peroxymonosulfate (PMS) from the bulk solution to the microbubble interface. This triggers an accelerated generation of interfacial sulfate radicals (SO4•-), with 20-fold higher concentration (4.48 × 10-11 M) than the bulk SO4•-. Notably, the generated SO4•- is preferentially situated at the air-water interface due to its lowest free energy and the strong hydrogen bonding interactions with H3O+. Moreover, it exhibits the highest oxidation reactivity toward gaseous pollutants like toluene, with a rate constant of 1010 M-1 s-1-over 100 times greater than bulk reactions. This work demonstrates a promising strategy to harness the air-water interface for accelerating ROS-induced reactions, highlighting the importance of interfacial ROS and its potential application.

Tailored MXene-derived nano-heterostructure oxides for peroxymonosulfate activation in the treatment of municipal wastewaters

Nowadays, in the field of environmental protection, a huge effort is focused on efficient and sustainable processes to treat wastewaters. The current study emphasizes the photocatalytic performance of TiNbOx, a nano-heterostructure material derived from the oxidation of (Ti0.75Nb0.25)2CTx MXene. The TiNbOx nano-heterostructure exhibited remarkable performance in the degradation of caffeine (CAF) and sulfamethoxazole (SMX) under UVA irradiation in the presence of peroxymonosulfate (PMS). Under optimal conditions, 0.2 g L-1 of TiNbOx, 0.5 mM PMS and 50 μM concentration of pollutants and natural pH of deionized water, we observed a complete degradation of SMX and 91% degradation of CAF. Scavenging studies provided evidence for the involvement of ˙OH and SO4˙- in the degradation of the pollutants, which was also supported by indirect techniques of electron paramagnetic resonance (EPR) spectroscopy. The degradation pathway of the pollutants was analyzed by liquid chromatography-mass spectrometry (LC-MS) and several mechanisms were suggested including hydroxylation and isoxazole ring-opening reactions. In addition, X-ray photoelectron spectroscopy (XPS) supported the proposed degradation mechanism. The reusability test underscored the high stability and efficiency of TiNbOx. Moreover, the significance of this research was emphasized by conducting degradation studies in tap water (TW) and tertiary effluents of the wastewater (WW) treatment plant in Bratislava. Under optimal conditions, 49% and 30% CAF were degraded in TW and WW, respectively, after 12 hours of reaction. For SMX, 68% and 67% degradations were obtained in TW and WW, respectively.

Exploring the viability of peracetic acid-mediated antibiotic degradation in wastewater through activation with electrogenerated HClO

Electrochemical advanced oxidation processes (EAOPs) face challenging conditions in chloride media, owing to the co-generation of undesirable Cl-disinfection byproducts (Cl-DBPs). Herein, the synergistic activation between in-situ electrogenerated HClO and peracetic acid (PAA)-based reactive species in actual wastewater is discussed. A metal-free graphene-modified graphite felt (graphene/GF) cathode is used for the first time to achieve the electrochemically-mediated activation of PAA. The PAA/Cl- system allowed a near-complete sulfamethoxazole (SMX) degradation (kobs =0.49 min-1) in only 5 min in a model solution, inducing 32.7- and 8.2-fold rise in kobs as compared to single PAA and Cl- systems, respectively. Such enhancement is attributed to the occurrence of 1O2 (25.5 μmol L-1 after 5 min of electrolysis) from the thermodynamically favored reaction between HClO and PAA-based reactive species. The antibiotic degradation in a complex water matrix was further considered. The SMX removal is slightly susceptible to the coexisting natural organic matter, with both the acute cytotoxicity (ACT) and the yield of 12 DBPs decreasing by 29.4 % and 37.3 %, respectively. According to calculations, HClO accumulation and organic Cl-addition reactions are thermodynamically unfavored. This study provides a scenario-oriented paradigm for PAA-based electrochemical treatment technology, being particularly appealing for treating wastewater rich in Cl- ion, which may derive in toxic Cl-DBPs.

Effect of Dissolved Organic Matter on the Photodegradation of Decachlorobiphenyl (PCB-209) in Heterogeneous Systems: Experimental Analysis and Excited-State Theory Calculations

Dissolved organic matter (DOM) can affect the transformation of pollutants through photosensitization, but most current research focuses on hydrophilic pollutants, making it such that less attention is paid to hydrophobic pollutants. In this paper, the effect and action mechanism of coexisting DOM on the photodegradation of decachlorobiphenyl (PCB-209) on suspended particles collected from the Yellow River were systematically investigated in a heterogeneous system using DOM standards and model compounds. Through molecular probe experiments, mass spectrometry analysis and theoretical calculations, we found that the excited triplet state of DOM (3DOM*) could excite PCB-209 to undergo dechlorination reaction. Due to the different modes of electron transition, the presence of carbonyl groups decreased the energy of 3DOM*, whereas the electron-donating groups made the energy of 3DOM* higher. DOM containing phenolic hydroxyl groups led to a higher steady-state concentration of •OH, and DOM containing phenyl ketone structures had a stronger ability to produce •O2-. Compared with aqueous •OH, •O2- produced from hydrophobic microregions could react more readily with PCB-209. This study deepens the understanding of the role of different functional groups of DOM in the photosensitized transformation of hydrophobic compounds.

Unveiling the environmental significance of acetylperoxyl radical: Reactivity quantification and kinetic modeling

Acetylperoxyl radical (CH3C(O)OO•) is among highly reactive organic radicals which are known to play crucial roles in atmospheric chemistry, aqueous chemistry and, most recently, peracetic acid (PAA)-based advanced oxidation processes. However, fundamental knowledge for its reactivity is scarce and severely hampers the understanding of relevant environmental processes. Herein, three independent experimental approaches were exploited for revelation and quantification of the reaction rates of acetylperoxyl radical. First, we developed and verified laser flash photolysis of biacetyl, ultraviolet (UV) photolysis of biacetyl, and pulse radiolysis of acetaldehyde, each as a clean source of CH3C(O)OO•. Then, using competition kinetics and selection of suitable probe and competitor compounds, the rate constants between CH3C(O)OO• and compounds of diverse structures were determined. The three experimental approaches complemented in reaction time scale and ease of operation, and provided cross-validation of the rate constants. Moreover, the formation of CH3C(O)OO• was verified by spin-trapped electron paramagnetic resonance, and potential influence of other reactive species in the systems was assessed. Overall, CH3C(O)OO• displays distinctively high reactivity and selectivity, reacting especially favorably with naphthyl and diene compounds (k ∼ 107-108 M-1 s-1) but sluggishly with N- and S-containing groups. Significantly, we demonstrated that incorporating acetylperoxyl radical-oxidation reactions significantly improved the accuracy in modeling the degradation of environmental micropollutants by UV/PAA treatment. This study is among the most comprehensive investigation for peroxyl radical reactivity to date, and establishes a robust methodology for investigating organic radical chemistry. The determined rate constants strengthen kinetic databases and improve modeling accuracy for natural and engineered systems.

Efficient electro-Fenton degradation of organic pollutants via the synergistic effect of 1O2 and •OH generated on single FeN4 sites

The electro-Fenton with in situ generated 1O2 and •OH is a promising method for the degradation of micropollutants. However, its application is hindered by the lack of catalysts that can efficiently generate 1O2 and •OH from electrochemical oxygen reduction. Herein, N-doped stacked carbon nanosheets supported Fe single atoms (Fe-NSC) with FeN4 sites were designed for simultaneous generation of 1O2 and •OH to enhance electro-Fenton degradation. Due to the synergistic effect of 1O2 and •OH, a variety of contaminants (phenol, 2,4-dichlorophenol, sulfamethoxazole, atrazine and bisphenol A) were efficiently degraded with high kinetic constants of 0.037-0.071 min-1 by the electro-Fenton with Fe-NSC as cathode (-0.6 V vs Ag/AgCl, pH 6). Moreover, the superior performance for electro-Fenton degradation was well maintained in a wide pH range from 3 to 10 even with interference of various inorganic salt ions. It was found that FeN4 sites with pyridinic N coordination were responsible for its good performance for electro-Fenton degradation. Its 1O2 yield was higher than •OH yield, and the contribution of 1O2 was more significant than •OH for pollutant degradation.

Tailoring the selective generation of oxidative organic radicals for toxic-by-product-free water decontamination

Peracetic acid (PAA) is emerging as a versatile agent for generating long-lived and selectively oxidative organic radicals (R-O•). Currently, the conventional transition metal-based activation strategies still suffer from metal ion leaching, undesirable by-products formation, and uncontrolled reactive species production. To address these challenges, we present a method employing BiOI with a unique electron structure as a PAA activator, thereby predominantly generating CH3C(O)O• radicals. The specificity of CH3C(O)O• generation ensured the superior performance of the BiOI/PAA system across a wide pH range (2.0 to 11.0), even in the presence of complex interfering substances such as humic acids, chloride ions, bicarbonate ions, and real-world water matrices. Unlike conventional catalytic oxidative methods, the BiOI/PAA system degrades sulfonamides without producing any toxic by-products. Our findings demonstrate the advantages of CH3C(O)O• in water decontamination and pave the way for the development of eco-friendly water decontaminations based on organic peroxides.

Frequency multiplexing enables parallel multi-sample EPR

Electron paramagnetic resonance (EPR) spectroscopy stands out as a powerful analytical technique with extensive applications in the fields of biology, chemistry, physics, and material sciences. It proves invaluable for investigating the molecular structure and reaction mechanisms of substances containing unpaired electrons, such as metal complexes, organic and inorganic radicals, and intermediate states in chemical reactions. However, despite their remarkable capabilities, EPR systems face significant limitations in terms of sample throughput, as current commercial systems only target the analysis of one sample at a time. Here we introduce a novel scheme for conducting ultra-high frequency continuous-wave EPR (CW EPR) targeting the EPR spectroscopy of multiple microliter volume samples in parallel. Our proof-of-principle prototype involves two decoupled detection cells equipped with high qualty factor Q = 104 solenoidal coils tuned to 488 and 589 MHz, ensuring a significant frequency gap for effective radio frequency (RF) decoupling between the channels. To further enhance electromagnetic decoupling, an orthogonal alignment of the coils was adopted. The paper further presents an innovative radiofrequency circuit concept that utilizes a single physical RF channel to simultaneously conduct parallel EPR on up to eight cells. Parallel EPR experiments on two BDPA samples, each with a sample volume of 18.3 μL, registered signal-to-noise ratios of 255 and 252 for the two EPR measurement cells, with no observable coupling. The showcased prototype, built using cost-effective commercially available fabrication technology, is readily scalable and represents an initial step with promising potential for advancing sample screening with high-throughput parallel EPR.

Interfacial OOH* mediated Fe(II) regeneration on the single atom Co-N-C catalyst for efficient Fenton-like processes

Fe(II) regeneration is decisive for highly efficient H2O2-based Fenton-like processes, but the role of cobalt-containing reactive sites in promoting Fe(II) regeneration was overlooked. Herein, a single atom Co-N-C catalyst was employed in Fe(II)/H2O2 system to promote the degradation of diverse organic contaminants. The EPR and quenching experiments indicated Co-N-C significantly enhanced the generation of superoxide species, and accelerated hydroxyl radical generation for pollutant degradation. The electrochemical and surface composition analyses demonstrated the enhanced H2O2 activation and Fe(III)/Fe(II) recycling on the catalyst. Furthermore, in-situ Raman characterization with shell-isolated gold nanoparticles was employed to visualize the interfacial reactive intermediates and their time-resolved interaction. The accumulation of interfacial CoOOH* was confirmed when Co-N-C activated H2O2 alone, but it rapidly transformed into FeOOH* upon Fe(II) addition. Besides, the temporal variation of OOH* intermediates and the relative intensity of Co(III)-O and Co(IV)=O peaks depicted the dynamic interaction of reactive intermediates along the H2O2 consumption. With this basis, we proposed a mechanism of interfacial OOH* mediated Fe(II) regeneration, which overcame the kinetical limitation of Fe(II)/H2O2 system. Therefore, this study provided a primary effort to elucidate the overlooked role of interfacial CoOOH* in the Fenton-like processes, which may inspire the design of more efficient catalysts.

Dual Nonradical Catalytic Pathways Mediated by Nanodiamond-Derived sp2/sp3 Hybrids for Sustainable Peracetic Acid Activation and Water Decontamination

Peracetic acid (PAA) oxidation catalyzed by metal-free carbons is promising for advanced water decontamination. Nevertheless, developing reaction-oriented and high-performance carbocatalysts has been limited by the ambiguous understanding of the intrinsic relationship between carbon chemical/molecular structure and PAA transformation behavior. Herein, we comprehensively investigated the PAA activation using a family of well-defined sp2/sp3 carbon hybrids from annealed nanodiamonds (ANDs). The activity of ANDs displays a volcano-type trend, with respect to the sp2/sp3 ratio. Intriguingly, sp3-C-enriched AND exhibits the best catalytic activity for PAA activation and phenolic oxidation, which is different from persulfate chemistry in which the sp2 network normally outperforms sp3 hybridization. At the electron-rich sp2-C site, PAA undergoes a reduction reaction to generate a reactive complex (AND-PAA*) and induces an electron-transfer oxidation pathway. At the sp3-C site adjacent to C═O, PAA is oxidized to surface-confined OH* and O* successively, which ultimately evolves into singlet oxygen (1O2) as the primary reactive species. Benefiting from the dual nonradical regimes on sp2/sp3 hybrids, AND mediates a sustainable redox recycle with PAA to continuously generate reactive species to attack water contaminants, meanwhile maintaining structural/chemical integrity and exceptional reusability in cyclic runs.

Sulfur Vacancies in Pyrite Trigger the Path to Nonradical Singlet Oxygen and Spontaneous Sulfamethoxazole Degradation: Unveiling the Hidden Potential in Sediments

Pharmaceutical residues in sediments are concerning as ubiquitous emerging contaminants. Pyrite is the most abundant sulfide minerals in the estuarine and coastal sediments, making it a major sink for pharmaceutical pollutants such as sulfamethoxazole (SMX). However, research on the adsorption and redox behaviors of SMX on the pyrite surface is limited. Here, we investigated the impact of the nonphotochemical process of pyrite on the fate of coexisting SMX. Remarkably, sulfur vacancies (SVs) on pyrite promoted the generation of nonradical species (hydrogen peroxide, H2O2 and singlet oxygen, 1O2), thereby exhibiting prominent SMX degradation performance under darkness. Nonradical 1O2 contributed approximately 73.1% of the total SMX degradation. The SVs with high surrounding electron density showed an advanced affinity for adsorbing O2 and then initiated redox reactions in the sediment electron-storing geobattery pyrite, resulting in the extensive generation of H2O2 through a two-electron oxygen reduction pathway. Surface Fe(III) (hydro)oxides on pyrite facilitated the decomposition of H2O2 to 1O2 generation. Distinct nonradical products were observed in all investigated estuarine and coastal samples with the concentrations of H2O2 ranging from 1.96 to 2.94 μM, while the concentrations of 1O2 ranged from 4.63 × 10-15 to 8.93 × 10-15 M. This dark-redox pathway outperformed traditional photochemical routes for pollutant degradation, broadening the possibilities for nonradical species use in estuarine and coastal sediments. Our study highlighted the SV-triggered process as a ubiquitous yet previously overlooked source of nonradical species, which offered fresh insights into geochemical processes and the dynamics of pollutants in regions of frequent redox oscillations and sulfur-rich sediments.

Spin-state Conversion by Asymmetrical Orbital Hybridization in Ni-doped Co3 O4 to Boost Singlet Oxygen Generation for Microbial Disinfection

Singlet oxygen (1 O2 ) plays a significant role in environmental and biomedical disinfection fields. Electrocatalytic processes hold great potential for 1 O2 generation, but remain challenging. Herein, a facile Ni doping converted spin-state transition approach is reported for boosting 1 O2 production. Magnetic analysis and theoretical calculations reveal that Ni occupied at the octahedral site of Co3 O4 can effectively induce a low-to-high spin-state transition. The high-spin Ni-Co3 O4 generate appropriate binding strength and enhance electron transfer between the Co centers with oxygen intermediates, thereby improving the catalytic activity of Ni-Co3 O4 for effective generating 1 O2 . In neutral conditions, 1×106  CFU mL-1 Gram-negative ESBL-producing Escherichia coli (E. coli) could be inactivated by Ni-Co3 O4 system within 5 min. Further antibacterial mechanisms indicate that 1 O2 can lead to cell membrane damage and DNA degradation so as to irreversible cell death. Additionally, the developed Ni-Co3 O4 system can effectively inactivate bacteria from wastewater and bioaerosols. This work provides an effective strategy for designing high-spin electrocatalysis to boost 1 O2 generation for disinfection process.

Visible Light-Mediated Selective Aerobic Oxidation of Alcohols Catalyzed by Disulfide in Batch and Flow

Selective aerobic oxidation of alcohols in batch and flow can be realized under light irradiation, utilizing disulfide as the photocatalyst, and a variety of primary and secondary alcohols were converted to the corresponding aldehydes or ketones in up to 99% yield and high selectivity. The reaction efficiency could be increased even further by combining a continuous-flow strategy. Detailed mechanistic studies have also been achieved to determine the role of oxygen and disulfides in this oxidation.

Understanding the Distance Effect of the Single-Atom Active Sites in Fenton-Like Reactions for Efficient Water Remediation

Emerging single-atom catalysts (SACs) are promising in water remediation through Fenton-like reactions. Despite the notable enhancement of catalytic activity through increasing the density of single-atom active sites, the performance improvement is not solely attributed to the increase in the number of active sites. The variation of catalytic behaviors stemming from the increased atomic density is particularly elusive and deserves an in-depth study. Herein, single-atom Fe catalysts (FeSA-CN) with different distances (dsite) between the adjacent single-atom Fe sites are constructed by controlling Fe loading. With the decrease in dsite value, remarkably enhanced catalytic activity of FeSA-CN is realized via the electron transfer regime with peroxymonosulfate (PMS) activation. The decrease in dsite value promotes electronic communication and further alters the electronic structure in favor of PMS activation. Moreover, the two adjacent single-atom Fe sites collectively adsorb PMS and achieve single-site desorption of the PMS decomposition products, maintaining continuous PMS activation and contaminant removal. Moreover, the FeSA-CN/PMS system exhibits excellent anti-interference performance for various aquatic systems and good durability in continuous-flow experiments, indicating its great potential for water treatment applications. This study provides an in-depth understanding of the distance effect of single-atom active sites on water remediation by designing densely populated SACs.

Sensitive and Selective Dual-Mode Responses to Reactive Oxygen Species by Chiral Manganese Dioxide Nanoparticles for Antiaging Skin

Excessive accumulation of reactive oxygen species (ROS) can lead to oxidative stress and oxidative damage, which is one of the important factors for aging and age-related diseases. Therefore, real-time monitoring and the moderate elimination of ROS is extremely important. In this study, a ROS-responsive circular dichroic (CD) at 553 nm and magnetic resonance imaging (MRI) dual-signals chiral manganese oxide (MnO2 ) nanoparticles (NPs) are designed and synthesized. Both the CD and MRI signals show excellent linear ranges for intracellular hydrogen peroxide (H2 O2 ) concentrations, with limits of detection (LOD) of 0.0027 nmol/106 cells and 0.016 nmol/106 cells, respectively. The lower LOD achieved with CD detection may be attributable to its higher anti-interference capability from the intracellular matrix. Importantly, ROS-induced cell aging is intervened by chiral MnO2 NPs via redox reactions with excessive intracellular ROS. In vivo experiments confirm that chiral MnO2 NPs effectively eliminate ROS in skin tissue, reduce oxidative stress levels, and alleviate skin aging. This approach provides a new strategy for the diagnosis and treatment of age-related diseases.

Unexpected side reactions dominate the oxidative transformation of aromatic amines in the Co(II)/peracetic acid system

Aromatic amines (AAs), ubiquitous in industrial applications, pose significant environmental hazards due to their resistance to conventional wastewater treatments. Peracetic acid (PAA)-based advanced oxidation processes (AOPs) have been proposed as effective strategies for addressing persistent AA contaminants. While the organic radicals generated in these systems are believed to be selective and highly oxidative, acetate residue complicates the evaluation of AA removal efficiency. In this work, we explored transformation pathways of AAs in a representative Co(II)-catalyzed PAA system, revealing five side reactions (i.e. nitrosation, nitration, coupling, dimerization, and acetylation) that yield 17 predominantly stable and toxic by-products. The dominant reactive species was demonstrated as Co-OOC(O)CH3, which hardly facilitated ring-opening reactions. Our findings highlight the potential risks associated with PAA-based AOPs for AA degradation and provide insights into selecting suitable catalytic systems aimed at efficient and by-product-free degradation of pollutants containing aromatic -NH2.

Singlet oxygen: Properties, generation, detection, and environmental applications

Singlet oxygen (1O2) is molecular oxygen in the excited state with high energy and electrophilic properties. It is widely found in nature, and its important role is gradually extending from chemical syntheses and medical techniques to environmental remediation. However, there exist ambiguities and controversies regarding detection methods, generation pathways, and reaction mechanisms which have hindered the understanding and applications of 1O2. For example, the inaccurate detection of 1O2 has led to an overestimation of its role in pollutant degradation. The difficulty in detecting multiple intermediate species obscures the mechanism of 1O2 production. The applications of 1O2 in environmental remediation have also not been comprehensively commented on. To fill these knowledge gaps, this paper systematically discussed the properties and generation of 1O2, reviewed the state-of-the-art detection methods for 1O2 and long-standing controversies in the catalytic systems. Future opportunities and challenges were also discussed regarding the applications of 1O2 in the degradation of pollutants dissolved in water and volatilized in the atmosphere, the disinfection of drinking water, the gas/solid sterilization, and the self-cleaning of filter membranes. This review is expected to provide a better understanding of 1O2-based advanced oxidation processes and practical applications in the environmental protection of 1O2.

Reinvestigation on the Mechanism for Algae Inactivation by the Ultraviolet/Peracetic Acid Process: Role of Reactive Species and Performance in Natural Water

This study provided an in-depth understanding of enhanced algae inactivation by combining ultraviolet and peracetic acid (UV/PAA) and selecting Microcystis aeruginosa as the target algae species. The electron paramagnetic resonance (EPR) tests and scavenging experiments provided direct evidence on the formed reactive species (RSs) and indicated the dominant role of RSs including singlet oxygen (1O2) and hydroxyl (HO•) and organic (RO•) radicals in algae inactivation. Based on the algae inactivation kinetic model and the determined steady-state concentration of RSs, the contribution of RSs was quantitatively assessed with the second-order rate constants for the inactivation of algae by HO•, RO•, and 1O2 of 2.67 × 109, 3.44 × 1010, and 1.72 × 109 M-1 s-1, respectively. Afterward, the coexisting bi/carbonate, acting as a shuttle, that promotes the transformation from HO• to RO• was evidenced to account for the better performance of the UV/PAA system in algae inactivation under the natural water background. Subsequently, along with the evaluation of the UV/PAA preoxidation to modify coagulation-sedimentation, the possible application of the UV/PAA process for algae removal was advanced.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.