Trapping of megabase-sized DNA molecules during agarose gel electrophoresis

Enzymatic Supercoiling of Bacterial Chromosomes Facilitates Genome Manipulation

The physical stability of bacterial chromosomes is important for their in vitro manipulation, while genetic stability is important in vivo. However, extracted naked chromosomes in the open circular form are fragile due to nicks and gaps. Using a nick/gap repair and negative supercoiling reaction (named SCR), we first achieved the negative supercoiling of the whole genomes extracted from Escherichia coli and Vibrio natriegens cells. Supercoiled chromosomes of 0.2-4.6 megabase (Mb) were separated by size using a conventional agarose gel electrophoresis and served as DNA size markers. We also achieved the enzymatic replication of 1-2 Mb chromosomes using the reconstituted E. coli replication-cycle reaction (RCR). Electroporation-ready 1 Mb chromosomes were prepared by a modified SCR performed at a low salt concentration (L-SCR) and directly introduced into commercial electrocompetent E. coli cells. Since successful electroporation relies on the genetic stability of a chromosome in cells, genetically stable 1 Mb chromosomes were developed according to a portable chromosome format (PCF). Using physically and genetically stabilized chromosomes, the democratization of genome synthetic biology will be greatly accelerated.

Single Molecule DNA Analysis Based on Atomic-Controllable Nanopores in Covalent Organic Frameworks

We explored the application of two-dimensional covalent organic frameworks (2D COFs) in single molecule DNA analysis. Two ultrathin COF nanosheets were exfoliated with pore sizes of 1.1 nm (COF-1.1) and 1.3 nm (COF-1.3) and covered closely on a quartz nanopipette with an orifice of 20 ± 5 nm. COF nanopores exhibited high size selectivity for fluorescent dyes and DNA molecules. The transport of long (calf thymus DNA) and short (DNA-80) DNA molecules through the COF nanopores was studied. Because of the strong interaction between DNA bases and the organic backbones of COFs, the DNA-80 was transported through the COF-1.1 nanopore at a speed of 270 μs/base, which is the slowest speed ever observed compared with 2D inorganic nanomaterials. This study shows that the COF nanosheet can work individually as a nanopore monomer with controllable pore size like its biological counterparts.

Extrachromosomal DNA amplicons in antimalarial-resistant Plasmodium falciparum

Extrachromosomal (ec) DNAs are genetic elements that exist separately from the genome. Since ecDNA can carry beneficial genes, they are a powerful adaptive mechanism in cancers and many pathogens. For the first time, we report ecDNA contributing to antimalarial resistance in Plasmodium falciparum, the most virulent human malaria parasite. Using pulse field gel electrophoresis combined with PCR-based copy number analysis, we detected two ecDNA elements that differ in migration and structure. Entrapment in the electrophoresis well and low susceptibility to exonucleases revealed that the biologically relevant ecDNA element is large and complex in structure. Using deep sequencing, we show that ecDNA originates from the chromosome and expansion of an ecDNA-specific sequence may improve its segregation or expression. We speculate that ecDNA is maintained using established mechanisms due to shared characteristics with the mitochondrial genome. Implications of ecDNA discovery in this organism are wide-reaching due to the potential for new strategies to target resistance development.

Microfluidic long DNA sample preparation from cells

A number of outstanding problems in genomics, such as identifying structural variations and sequencing through centromeres and telomeres, stand poised to benefit tremendously from emerging long-read genomics technologies such as nanopore sequencing and genome mapping in nanochannels. However, optimal application of these new genomics technologies requires facile methods for extracting long DNA from cells. These sample preparation tools should be amenable to automation and minimize fragmentation of the long DNA molecules by shear. We present one such approach in a poly(dimethylsiloxane) device, where gel-based high molecular weight DNA extraction and continuous flow purification in a 3D cell culture-inspired geometry is followed by electrophoretic extraction of the long DNA from the miniaturized gel. Molecular combing reveals that the device produces molecules that are typically in excess of 100 kilobase pairs in size, with the longest molecule extending up to 4 megabase pairs. The microfluidic format reduces the standard day-long and labor-intensive DNA extraction process to 4 hours, making it a promising prototype platform for routine long DNA sample preparation.

Mechanical Trapping of DNA in a Double-Nanopore System

Nanopores have become ubiquitous components of systems for single-molecule manipulation and detection, in particular DNA sequencing where electric field driven translocation of DNA through a nanopore is used to read out the DNA molecule. Here, we present a double-pore system where two nanopores are drilled in parallel through the same solid-state membrane, which offers new opportunities for DNA manipulation. Our experiments and molecular dynamics simulations show that simultaneous electrophoretic capture of a DNA molecule by the two nanopores mechanically traps the molecule, increasing its residence time within the nanopores by orders of magnitude. Remarkably, by using two unequal-sized nanopores, the pore of DNA entry and exit can be discerned from the ionic current blockades, and the translocation direction can be precisely controlled by small differences in the effective force applied to DNA. The mechanical arrest of DNA translocation using a double-pore system can be straightforwardly integrated into any solid-state nanopore platform, including those using optical or transverse-current readouts.

Control of microtubule trajectory within an electric field by altering surface charge density

One of challenges for using microtubules (MTs) driven by kinesin motors in microfluidic environments is to control their direction of movement. Although applying physical biases to rectify MTs is prevalent, it has not been established as a design methodology in conjunction with microfluidic devices. In the future, the methodology is expected to achieve functional motor-driven nanosystems. Here, we propose a method to guide kinesin-propelled MTs in multiple directions under an electric field by designing a charged surface of MT minus ends labeled with dsDNA via a streptavidin-biotin interaction. MTs labeled with 20-bp or 50-bp dsDNA molecules showed significantly different trajectories according to the DNA length, which were in good agreement with values predicted from electrophoretic mobilities measured for their minus ends. Since the effective charge of labeled DNA molecules was equal to that of freely dispersed DNA molecules in a buffer solution, MT trajectory could be estimated by selecting labeling molecules with known charges. Moreover, the estimated trajectory enables to define geometrical sizes of a microfluidic device. This rational molecular design and prediction methodology allows MTs to be guided in multiple directions, demonstrating the feasibility of using molecular sorters driven by motor proteins.

Mechanism of DNA trapping in nanoporous structures during asymmetric pulsed-field electrophoresis

We investigate the trapping mechanism of individual DNA molecules in ordered nanoporous structures generated by crystalline particle arrays. Two requisites for trapping are revealed by the dynamics of single trapped DNA, fully-stretched U/J shapes and hernia formation. The experimental results show there is a stronger possibility for hernias to lead the reorientation upon switching directions of the voltage at high field strengths, where trapping occurs. Fully stretched DNA has longer unhooking times than expected by a classic rope-on-pulley model. We propose a dielectrophoretic (DEP) force reduces the mobility of segments at the apex of the U or J, where field gradients are highest, based on simulations and observations of the trapping force dependence on field strength. A modified model for unhooking time is obtained after the DEP force is introduced. The new model explains the unhooking time data by predicting an infinite trapping time when the ratio of arm length differences (of the U or J) to molecule length Δx/L < β, where β is a DEP parameter that is found to strongly increase with electric field. The DNA polarizability calculated with the DEP model and experimental value of β is of the same magnitude of reported value. The results indicate the tension at the apex of U/J shape DNA is the primary reason for DNA trapping during pulsed field separation, instead of hernias.

A chiroptical switch based on DNA/layered double hydroxide ultrathin films

A highly oriented film was fabricated by layer-by-layer self-assembly of DNA and MgAl-layered double hydroxide nanosheets, and its application in chiroptical switch was demonstrated via intercalation and deintercalation of an achiral molecule into the DNA cavity. DNA molecules are prone to forming an ordered and dispersive state in the interlayer region of rigid layered double hydroxide (LDH) nanosheets as confirmed by scanning electron microscopy and atomic force microscopy. The induced chiroptical ultrathin film (UTF) is achieved via the intercalation of an achiral chromophore [5,10,15,20-tetrakis(4-N-methylpyridyl)porphine tetra(p-toluenesulfonate) (TMPyP)] into the spiral cavity of DNA stabilized in the LDH matrix [denoted as TMPyP-(DNA/LDH)20]. Fluorescence and circular dichroism spectroscopy are utilized to testify the intercalation of TMPyP into (DNA/LDH)20 UTF that involves two steps: the electrostatic binding of TMPyP onto the surface of (DNA/LDH)20 followed by intercalation into base pairs of DNA. In addition, the TMPyP-(DNA/LDH)20 UTF exhibits good reversibility and repeatability in induced optical chirality, based on the intercalation and deintercalation of TMPyP by alternate exposure to HCl and NH3/H2O vapor, which can be potentially used as a chiroptical switch in data storage.

Variables influencing extraction of nucleic acids from microbial plankton (viruses, bacteria, and protists) collected on nanoporous aluminum oxide filters

Anodic aluminum oxide (AAO) filters have high porosity and can be manufactured with a pore size that is small enough to quantitatively capture viruses. These properties make the filters potentially useful for harvesting total microbial communities from water samples for molecular analyses, but their performance for nucleic acid extraction has not been systematically or quantitatively evaluated. In this study, we characterized the flux of water through commercially produced nanoporous (0.02 μm) AAO filters (Anotop; Whatman) and used isolates (a virus, a bacterium, and a protist) and natural seawater samples to test variables that we expected would influence the efficiency with which nucleic acids are recovered from the filters. Extraction chemistry had a significant effect on DNA yield, and back flushing the filters during extraction was found to improve yields of high-molecular-weight DNA. Using the back-flush protocol, the mass of DNA recovered from microorganisms collected on AAO filters was ≥ 100% of that extracted from pellets of cells and viruses and 94% ± 9% of that obtained by direct extraction of a liquid bacterial culture. The latter is a minimum estimate of the relative recovery of microbial DNA, since liquid cultures include dissolved nucleic acids that are retained inefficiently by the filter. In conclusion, we demonstrate that nucleic acids can be extracted from microorganisms on AAO filters with an efficiency similar to that achievable by direct extraction of microbes in suspension or in pellets. These filters are therefore a convenient means by which to harvest total microbial communities from multiple aqueous samples in parallel for subsequent molecular analyses.

Trapping and breaking of in vivo nicked DNA during pulsed field gel electrophoresis

Pulsed field gel electrophoresis (PFGE) offers a high-resolution approach to quantify chromosomal fragmentation in bacteria, measured as percentage of chromosomal DNA entering the gel. The degree of separation in pulsed field gel (PFG) depends on the size of DNA as well as various conditions of electrophoresis such as electric field strength, time of electrophoresis, switch time, and buffer composition. Here we describe a new parameter, the structural integrity of the sample DNA itself, that influences its migration through PFGs. We show that subchromosomal fragments containing both spontaneous and DNA damage-induced nicks are prone to breakage during PFGE. Such breakage at single-strand interruptions results in artifactual decrease in molecular weight of linear DNA making accurate determination of the number of double-strand breaks difficult. Although breakage of nicked subchromosomal fragments is field strength independent, some high-molecular-weight subchromosomal fragments are also trapped within wells under the standard PFGE conditions. This trapping can be minimized by lowering the field strength and increasing the time of electrophoresis. We discuss how breakage of nicked DNA may be mechanistically linked to trapping. Our results suggest how to optimize conditions for PFGE when quantifying chromosomal fragmentation induced by DNA damage.

DNA of a circular minichromosome linearized by restriction enzymes or other reagents is resistant to further cleavage: an influence of chromatin topology on the accessibility of DNA

The accessibility of DNA in chromatin is an essential factor in regulating its activities. We studied the accessibility of the DNA in a ∼170 kb circular minichromosome to DNA-cleaving reagents using pulsed-field gel electrophoresis and fibre-fluorescence in situ hybridization on combed DNA molecules. Only one of several potential sites in the minichromosome DNA was accessible to restriction enzymes in permeabilized cells, and in growing cells only a single site at an essentially random position was cut by poisoned topoisomerase II, neocarzinostatin and γ-radiation, which have multiple potential cleavage sites; further sites were then inaccessible in the linearized minichromosomes. Sequential exposure to combinations of these reagents also resulted in cleavage at only a single site. Minichromosome DNA containing single-strand breaks created by a nicking endonuclease to relax any unconstrained superhelicity was also cut at only a single position by a restriction enzyme. Further sites became accessible after ≥95% of histones H2A, H2B and H1, and most non-histone proteins were extracted. These observations suggest that a global rearrangement of the three-dimensional packing and interactions of nucleosomes occurs when a circular minichromosome is linearized and results in its DNA becoming inaccessible to probes.

Entropy-driven single molecule tug-of-war of DNA at micro-nanofluidic interfaces

Entropy-driven polymer dynamics at the nanoscale is fundamentally important in biological systems but the dependence of the entropic force on the nanoconfinement remains elusive. Here, we established an entropy-driven single molecule tug-of-war (TOW) at two micro-nanofluidic interfaces bridged by a nanoslit, performed the force analysis from a modified wormlike chain in the TOW scenario and the entropic recoiling process, and determined the associated scalings on the nanoconfinement. Our results provide a direct experimental evidence that the entropic forces in these two regimes, though unequal, are essentially constant at defined slit heights, irrespective of the slit lengths and the DNA segments within. Our findings have the implications to polymer transport at the nanoscale, device design for single molecule analysis, and biotechnological applications.

Reverse DNA translocation through a solid-state nanopore by magnetic tweezers

Voltage-driven DNA translocation through nanopores has attracted wide interest for many potential applications in molecular biology and biotechnology. However, it is intrinsically difficult to control the DNA motion in standard DNA translocation processes in which a strong electric field is required in drawing DNA into the pore, but it also leads to uncontrollable fast DNA translocation. Here we explore a new type of DNA translocation. We dub it 'reverse DNA translocation', in which the DNA is pulled through a nanopore mechanically by a magnetic bead, driven by a magnetic-field gradient. This technique is compatible with simultaneous ionic current measurements and is suitable for multiple nanopores, paving the way for large scale applications. We report the first experiment of reverse DNA translocation through a solid-state nanopore using magnetic tweezers.

Effect of the matrix on DNA electrophoretic mobility

DNA electrophoretic mobilities are highly dependent on the nature of the matrix in which the separation takes place. This review describes the effect of the matrix on DNA separations in agarose gels, polyacrylamide gels and solutions containing entangled linear polymers, correlating the electrophoretic mobilities with information obtained from other types of studies. DNA mobilities in various sieving media are determined by the interplay of three factors: the relative size of the DNA molecule with respect to the effective pore size of the matrix, the effect of the electric field on the matrix, and specific interactions of DNA with the matrix during electrophoresis.

A microfluidic study of mechanisms in the electrophoresis of supercoiled DNA

In this work, microfluidic chips were used to study the electrophoresis of supercoiled DNA (SC DNA) in agarose. This system allowed us to study the electrophoretic and trapping behaviours of SC DNA of various lengths, at various fields and separation distances. Near a critical electric field the DNA is trapped such that the concentration falls exponentially with distance. The trapping of such circular DNA has been explained in terms of the 'lobster trap' or 'impalement' model where shorter fibres become trapping sites at higher fields, leading to an ongoing (and gradual) increase in trapping with increasing field. By contrast, the present study suggests that under some circumstances the traps have a barrier such that only when the DNA has sufficient energy (at high enough fields) can it become trapped, leading to a sudden transition in behaviours at the critical field. We propose an 'activated impalement' mechanism of trapping in which only at sufficiently high fields is the SC DNA impaled and trapped for long times. The critical electric field appears to be inversely proportional to the length of the DNA molecule, suggesting that the force required to impale the SC DNA is constant.

Model for forward polymerization and switching transition between polymerase and exonuclease sites by DNA polymerase molecular motors

Based on the available crystal structure a model is presented for the polymerization activity and switching transition between polymerase and exonuclease sites of a DNA polymerase molecular motor. Using the model, the fast polymerization rate for correctly base-paired DNA and much reduced polymerization rate after an incorporation of a mismatched base can be well explained. The dependences of the polymerization rate and exonuclease rate on mechanical tension acting on the DNA template are studied. The switching rates between the two sites are analyzed. All the results show good quantitative agreement with the available experimental results.

Recovery of intact yeast chromosomal DNA from agarose gel plugs using coil-globule transition

In the current studies, we designed a new approach for sizing and isolating chromosomal DNA using coil-globule transition, which avoids fragmentation of giant DNA due to mechanical stress. Although coil-globule transition is reversible and globular DNA is tolerant to mechanical stress, globular DNA cannot be manipulated by an electric field because of the loss of its negative charges. In our system, however, DNA is extracted from an agarose gel in a coiled state into a solution of PEG, and coil-globule transition is induced by cations generated at the anode. This method achieves buffer exchange without stirring, which is the main cause of mechanical stress. Real-time analysis of T4dc viral DNA molecules revealed that they change immediately from a coiled to a globular form when the cation concentration is sufficiently high. This method was used to prepare yeast chromosomal DNA in a globular state without fragmentation.

Dependence of DNA polymerase replication rate on external forces: a model based on molecular dynamics simulations

Molecular dynamics simulations are presented for a Thermus aquaticus (Taq) DNA polymerase I complex (consisting of the protein, the primer-template DNA strands, and the incoming nucleotide) subjected to external forces. The results obtained with a force applied to the DNA template strand provide insights into the effect of the tension on the activity of the enzyme. At forces below 30 pN a local model based on the parameters determined from the simulations, including the restricted motion of the DNA bases at the active site, yields a replication rate dependence on force in agreement with experiment. Simulations above 40 pN reveal large conformational changes in the enzyme-bound DNA that may have a role in the force-induced exonucleolysis observed experimentally.

Ice-water interface migration by temperature controlling for stretching of DNA molecules

This report shows a new DNA stretching method using migration of an ice-water interface. DNA molecules were stretched accompanying the migration of the solid-liquid interface and immobilized in frozen area. This simple method needs no chemical modification to keep DNA in the stretched form. For full stretching of DNA molecules, one terminus of the DNA molecules were anchored on silanized substrate. The anchored DNA molecules were stretched by freezing the DNA solution. The stretched DNA molecules were observed after sublimation of the frozen solution keeping its stretched form on silanized surface which had no attractive interaction with DNA molecules except for the SH-modified terminus in solution. An infrared (IR) laser beam was introduced to a frozen DNA solution through an objective lens for local area melting of the solution. Scanning of the laser irradiation caused stretching and enclosing of DNA molecules in the frozen area followed by migration of the solid-liquid interface.

Separation of Long DNA Molecules by Quartz Nanopillar Chips under a Direct Current Electric Field

We have established the nanofabrication technique for constructing nanopillars with high aspect ratio (100-500 nm diameter and 500-5000 nm tall) inside a microchannel on a quartz chip. The size of pillars and the spacing between pillars are designed as a DNA sieving matrix for optimal analysis of large DNA fragments over a few kilobase pairs (kbp). A chip with nanopillar channel and simple cross injector was developed based on the optimal design and applied to the separation of DNA fragments (1-38 kbp) and large DNA fragments (lambda DNA, 48.5 kbp; T4 DNA, 165.6 kbp) that are difficult to separate on conventional gel electrophoresis and capillary electrophoresis without a pulsed-field technique. DNA fragments ranging from 1 to 38 kbp were separated as clear bands, and furthermore, the mixture of lambda DNA and T4 DNA was successfully separated by a 380-microm-long nanopillar channel within only 10 s even under a direct current (dc) electric field. Theoretical plate number N of the channel (380-1450 microm long) was 1000-3000 (0.7 x 10(6)-2.1 x 10(6) plates/m). A single DNA molecule observation during electrophoresis in a nanopillar channel revealed that the optimal nanopillars induced T4 DNA to form a narrow U-shaped conformation during electrophoresis whereas lambda DNA kept a rather spherical conformation. We demonstrated that, even under a dc electric field, the optimal nanopillar dimensions depend on a gyration radius of DNA molecule that made it possible to separate large DNA fragments in a short time.

Wall effects on DNA stretch and relaxation

Hydrodynamic wall effects are treated with an image or reflection method. This method uses a mirror image of the molecule, with the opposite velocity, to satisfy the non-slip boundary condition of zero velocity of the liquid at the wall. Molecules moving inside a slit require an infinite series of images, or reflections from both walls, whose effects converge slower for thinner slits. It is shown that, with the same external field, wall effects increase the electrophoretic stretch of DNA, more so for thinner slits. The theory is in fairly good agreement with stretch experiments on T4 DNA in slits of width 5, 0.3, and 0.09 microm by Bakajin et al. (Phys. Rev. Let. 80 (1998) 2737). For the same slits relaxation data are available for T4 DNA first hooked around an obstacle, stretched in a U-shape in an external electric field, and sliding off until the stretched molecule moves away in free electrophoresis. The theory approximates the relaxation of the molecule, after detachment from the obstacle, as the relaxation of tethered DNA stretched in a temporary electric field. The theory agrees fairly well with the experiments. The significance of electroosmotic flow is discussed for electrophoretic experiments. An Appendix gives numerical data on the free electrophoresis of unstained and stained DNA, and discusses problems of the kinetic diameter of DNA.

The length dependence of translational diffusion, free solution electrophoretic mobility, and electrophoretic tether force of rigid rod-like model duplex DNA

In this work, boundary element modeling is used to study the transport of highly charged rod-like model polyions of various length under a variety of different aqueous salt conditions. Transport properties considered include free solution electrophoretic mobility, translational diffusion, and the components of the "tether force" tensor. The model parameters are chosen to coincide with transport measurements of duplex DNA carried out under six different salt/temperature conditions. The focus of the analysis is on the length dependence of the free solution electrophoretic mobility. In a solution containing 0.04 M Tris-acetate buffer at 25 degrees C, calculated mobilities using straight rod models show a stronger dependence on fragment length than that observed experimentally. By carrying out model studies on curved rod models, it is concluded that the "leveling off" of mobility with fragment length is due, in part at least, to the finite curvature of DNA. Experimental mobilities of long duplex DNA in monovalent alkali salts are reasonably well explained once account is taken of long-range bending and the simplifying assumptions of the model studies.

Single-molecule studies of the effect of template tension on T7 DNA polymerase activity

T7 DNA polymerase catalyses DNA replication in vitro at rates of more than 100 bases per second and has a 3'-->5' exonuclease (nucleotide removing) activity at a separate active site. This enzyme possesses a 'right hand' shape which is common to most polymerases with fingers, palm and thumb domains. The rate-limiting step for replication is thought to involve a conformational change between an 'open fingers' state in which the active site samples nucleotides, and a 'closed' state in which nucleotide incorporation occurs. DNA polymerase must function as a molecular motor converting chemical energy into mechanical force as it moves over the template. Here we show, using a single-molecule assay based on the differential elasticity of single-stranded and double-stranded DNA, that mechanical force is generated during the rate-limiting step and that the motor can work against a maximum template tension of approximately 34 pN. Estimates of the mechanical and entropic work done by the enzyme show that T7 DNA polymerase organizes two template bases in the polymerization site during each catalytic cycle. We also find a force-induced 100-fold increase in exonucleolysis above 40 pN.