5-Fluorouracil-loaded chitosan coated polylactic acid microspheres as biodegradable drug carriers for cerebral tumours

Biodegradable nanocarriers based on chitosan-modified mesoporous silica nanoparticles for delivery of methotrexate for application in breast cancer treatment

Nanocarriers have demonstrated great promise in the delivery of hydrophobic drugs particularly to tumor spaces by enhanced permeability and retention (EPR) effects. Mesoporous silica nanoparticles (MSNs) are the attractive nanocarrier system to reduce the drug's toxic side effects, enable controlled drug release, prevent drug degradation and provide a biocompatible and biodegradable high surface area carrier. Surface-modified MSNs have been applied to increase drug loading and efficiency. In this study, functionalized MSNs loaded with methotrexate (MTX) were designed for use as a cytotoxic agent. The MSNs were first modified with 3-triethoxysilylpropylamine (APTES) and then with chitosan through covalent coupling mediated by glutaraldehyde. The physicochemical properties of the nanoparticles were optimized for each step. The loading percentage (12.2%) and release profile of MTX as an anti-breast cancer drug, loaded at amine-modified MSNs, were measured via high performance liquid chromatography (HPLC). Moreover, the uptake profiles of fluorescein isothiocyanate (FITC)-labeled MSN-APTES-chitosan with or without MTX were monitored on MCF7 cancer cells via confocal microscopy. Following exposure of nanoparticles to body fluids, they were surrounded by specific proteins that may affect their cellular uptake. Hence, the adsorption profiles of protein corona on the surface of MSN, amine-modified MSN and MTX-loaded MSN-APTES-chitosan were analyzed. The cytotoxic potential for killing breast cancer cells was also studied. The MTX loaded MSN-APTES-chitosan showed a positive effect at a low dose (0.5 μM MTX). In this study, we introduce a new method to synthesize biodegradable MSNs with small and uniform particle size, achieve high MTX loading via covalent amine and chitosan-functionalization, monitor the cellular uptake and demonstrate the potential to decrease the viability of breast cancer cells at low dose.

Chitosan-Based Non-viral Gene and Drug Delivery Systems for Brain Cancer

Central nervous system (CNS) tumors are a leading source of morbidity and mortality worldwide. Today, different strategies have been developed to allow targeted and controlled drug delivery into the brain. Gene therapy is a system based on the modification of patient's cells through the introduction of genetic material to exert a specific action. Administration of the foreign genetic material can be done through viral-mediated delivery or non-viral delivery via physical or mechanical systems. For brain cancer specifically, gene therapy can overcome the actual challenge of blood brain barrier penetration, the main reason for therapeutic failure. Chitosan (CS), a natural based biodegradable polymer obtained from the exoskeleton of crustaceans such as crab, shrimp, and lobster, has been used as a delivery vehicle in several non-viral modification strategies. This cationic polysaccharide is highly suitable for gene delivery mainly due to its chemical properties, its non-toxic nature, its capacity to protect nucleic acids through the formation of complexes with the genetic material, and its ease of degradation in organic environments. Recent evidence supports the use of CS as an alternative gene delivery system for cancer treatment. This review will describe multiple studies highlighting the advantages and challenges of CS-based delivery structures for the treatment of brain tumors. Furthermore, this review will provide insight on the translational potential of various CS based-strategies in current clinical cancer studies. Specifically, CS-based nanostructures including nanocapsules, nanospheres, solid-gel formulations, and nanoemulsions, also microshperes and micelles will be evaluated.

PLGA Microparticles Entrapping Chitosan-Based Nanoparticles for the Ocular Delivery of Ranibizumab

Age-related macular degeneration (AMD) is the leading cause of certified vision loss worldwide. The standard treatment for neovascular AMD involves repeated intravitreal injections of therapeutic proteins directed against vascular endothelial growth factor, such as ranibizumab. Biodegradable polymers, such as poly(lactic-co-glycolic acid) (PLGA), form delivery vehicles which can be used to treat posterior segment eye diseases, but suffer from poor protein loading and release. This work describes a "system-within-system", PLGA microparticles incorporating chitosan-based nanoparticles, for improved loading and sustained intravitreal delivery of ranibizumab. Chitosan-N-acetyl-l-cysteine (CNAC) was synthesized and its synthesis confirmed using FT-IR and (1)H NMR. Chitosan-based nanoparticles composed of CNAC, CNAC/tripolyphosphate (CNAC/TPP), chitosan, chitosan/TPP (chit/TPP), or chit/TPP-hyaluronic acid (chit/TPP-HA) were incorporated in PLGA microparticles using a modified w/o/w double emulsion method. Nanoparticles and final nanoparticles-within-microparticles were characterized for their protein-nanoparticle interaction, size, zeta potential, morphology, protein loading, stability, in vitro release, in vivo antiangiogenic activity, and effects on cell viability. The prepared nanoparticles were 17-350 nm in size and had zeta potentials of -1.4 to +12 mV. Microscopic imaging revealed spherical nanoparticles on the surface of PLGA microparticles for preparations containing chit/TPP, CNAC, and CNAC/TPP. Ranibizumab entrapment efficiency in the preparations varied between 13 and 69% and was highest for the PLGA microparticles containing CNAC nanoparticles. This preparation also showed the slowest release with no initial burst release compared to all other preparations. Incorporation of TPP to this formulation increased the rate of protein release and reduced entrapment efficiency. PLGA microparticles containing chit/TPP-HA showed the fastest and near-complete release of ranibizumab. All of the prepared empty particles showed no effect on cell viability up to a concentration of 12.5 mg/mL. Ranibizumab released from all preparations maintained its structural integrity and in vitro activity. The chit/TPP-HA preparation enhanced antiangiogenic activity and may provide a potential biocompatible platform for enhanced antiangiogenic activity in combination with ranibizumab. In conclusion, the PLGA microparticles containing CNAC nanoparticles showed significantly improved ranibizumab loading and release profile. This novel drug delivery system may have potential for improved intravitreal delivery of therapeutic proteins, thereby reducing the frequency, risk, and cost of burdensome intravitreal injections.

Drug encapsulated polymeric microspheres for intracranial tumor therapy: A review of the literature

Despite intensive surgical excision, radiation therapy, and chemotherapy, the current life expectancy for patients diagnosed with glioblastoma multiforme is only 12 to 15months. One of the approaches being explored to increase chemotherapeutic efficacy is to locally deliver chemotherapeutics encapsulated within degradable, polymeric microspheres. This review describes the techniques used to formulate drug encapsulated microspheres targeted for intracranial tumor therapy and how microsphere characteristics such as drug loading and encapsulation efficiency can be tuned based on formulation parameters. Further, the results of in vitro studies are discussed, detailing the varied drug release profiles obtained and validation of drug efficacy. Finally, in vivo results are summarized, highlighting the study design and the effectiveness of the drug encapsulated microspheres applied intracranially.

New trends in guided nanotherapies for digestive cancers: A systematic review

Digestive tract tumors are among the most common and deadliest malignancies worldwide, mainly due to late diagnosis and lack of efficient therapeutics. Current treatments essentially rely on surgery associated with (neo)adjuvant chemotherapy agents. Despite an upfront response, conventional drugs often fail to eliminate highly aggressive clones endowed with chemoresistant properties, which are responsible for tumor recurrence and disease dissemination. Synthetic drugs also present severe adverse systemic effects, hampering the administration of biologically effective dosages. Nanoencapsulation of chemotherapeutic agents within biocompatible polymeric or lipid matrices holds great potential to improve the pharmacokinetics and efficacy of conventional chemotherapy while reducing systemic toxicity. Tagging nanoparticle surfaces with specific ligands for cancer cells, namely monoclonal antibodies or antibody fragments, has provided means to target more aggressive clones, further improving the selectivity and efficacy of nanodelivery vehicles. In fact, over the past twenty years, significant research has translated into a wide array of guided nanoparticles, providing the molecular background for a new generation of intelligent and more effective anti-cancer agents. Attempting to bring awareness among the medical community to emerging targeted nanopharmaceuticals and foster advances in the field, we have conducted a systematic review about this matter. Emphasis was set on ongoing preclinical and clinical trials for liver, colorectal, gastric and pancreatic cancers. To the best of our knowledge this is the first systematic and integrated overview on this field. Using a specific query, 433 abstracts were gathered and narrowed to 47 manuscripts when matched against inclusion/exclusion criteria. All studies showed that active targeting improves the effectiveness of the nanodrugs alone, while lowering its side effects. The main focus has been on hepatocarcinomas, mainly by exploring glycans as homing molecules. Other ligands such as peptides/small proteins and antibodies/antibody fragments, with affinity to either tumor vasculature or tumor cells, have also been widely and successfully applied to guide nanodrugs to gastrointestinal carcinomas. Conversely, few solutions have been presented for pancreatic tumors. To this date only three nanocomplexes have progressed beyond pre-clinical stages: i) PK2, a galactosamine-functionalized polymeric-DOX formulation for hepatocarcinomas; ii) MCC-465, an anti-(myosin heavy chain a) immunoliposome for advanced stage metastatic solid tumors; and iii) MBP-426, a transferrin-liposome-oxaliplatin conjugate, also for advanced stage tumors. Still, none has been approved for clinical use. However, based on the high amount of pre-clinical studies showing enthusiastic results, the number of clinical trials is expected to increase in the near future. A more profound understanding about the molecular nature of chemoresistant clones and cancer stem cell biology will also contribute to boost the field of guided nanopharmacology towards more effective solutions.

N-Succinyl-chitosan nanoparticles coupled with low-density lipoprotein for targeted osthole-loaded delivery to low-density lipoprotein receptor-rich tumors

N-Succinyl-chitosan (NSC) was synthesized and NSC nanoparticles (NPs) with loaded osthole (Ost) (Ost/NSC-NPs) were prepared by emulsion solvent diffusion. Subsequently, low-density lipoprotein (LDL)-mediated NSC-NPs with loaded Ost (Ost/LDL-NSC-NPs) were obtained by coupling LDL with Ost/NSC-NPs through amide linkage. The average particle size of Ost/NSC-NPs was approximately 145 nm, the entrapment efficiency was 78.28%±2.06%, and the drug-loading amount was 18.09%±0.17%. The release of Ost from Ost/NSC-NPs in vitro showed a more evident sustained effect than the native material. The half maximal inhibitory concentration of Ost/LDL-NSC-NPs was only 16.23% that of the free Ost at 24 hours in HepG2 cells. Ost inhibited HepG2 cell proliferation by arresting cells in the synthesis phase of the cell cycle and by triggering apoptosis. Cellular uptake and subcellular localization in vitro and near-infrared fluorescence real-time imaging in vivo showed that Ost/LDL-NSC-NPs had high targeting efficacy. Therefore, LDL-NSC-NPs are a promising system for targeted Ost delivery to liver tumor.

Heparin crosslinked chitosan microspheres for the delivery of neural stem cells and growth factors for central nervous system repair

An effective paradigm for transplanting large numbers of neural stem cells after central nervous system (CNS) injury has yet to be established. Biomaterial scaffolds have shown promise in cell transplantation and in regenerative medicine, but improved scaffolds are needed. In this study we designed and optimized multifunctional and biocompatible chitosan-based films and microspheres for the delivery of neural stem cells and growth factors for CNS injuries. The chitosan microspheres were fabricated by coaxial airflow techniques, with the sphere size controlled by varying the syringe needle gauge and the airflow rate. When applying a coaxial airflow at 30 standard cubic feet per hour, ∼300μm diameter spheres were reproducibly generated that were physically stable yet susceptible to enzymatic degradation. Heparin was covalently crosslinked to the chitosan scaffolds using genipin, which bound fibroblast growth factor-2 (FGF-2) with high affinity while retaining its biological activity. At 1μgml(-1) approximately 80% of the FGF-2 bound to the scaffold. A neural stem cell line, GFP+RG3.6 derived from embryonic rat cortex, was used to evaluate cytocompatibility, attachment and survival on the crosslinked chitosan-heparin complex surfaces. The MTT assay and microscopic analysis revealed that the scaffold containing tethered FGF-2 was superior in sustaining survival and growth of neural stem cells compared to standard culture conditions. Altogether, our results demonstrate that this multifunctional scaffold possesses good cytocompatibility and can be used as a growth factor delivery vehicle while supporting neural stem cell attachment and survival.

Studies on tolfenamic acid-chitosan intermolecular interactions: effect of pH, polymer concentration and molecular weight

Solid-state properties of tolfenamic acid (TA) and its complexes with chitosan (CT) have been studied. Effect of medium pH, molecular weight of polymer and its different concentrations on these TA-CT complexes were studied in detail. Low and medium molecular weight CT have been used in different ratios at pH ranging from 4 to 6 and freeze-drying technique has been employed to modify the appearance of crystalline TA. Physical properties of the formed complexes have been studied by employing X-ray diffraction, differential scanning calorimetry and scanning electron microscopy; chemical structure has been studied using Fourier transform infrared spectroscopy. The results showed that both forms of the polymer exhibited complete conversion in 1:8 ratio at pH 4, 1:4 at pH 5 and 1:1 at pH 6 indicating a marked effect of pH on drug-polymer complexation. The percent crystallinity calculations indicated low molecular weight CT slightly more effective than the other form. No changes in the complexes have been observed during the 12 week storage under controlled conditions. Both forms of CT at different pH values indicated retardation of recrystallization in TA during cooling of the melt from 1:1 ratios exhibiting formation of strong intermolecular hydrogen bonding between the drug and the polymer.

Current progress on bio-based polymers and their future trends

This article reviews the recent trends, developments, and future applications of bio-based polymers produced from renewable resources. Bio-based polymers are attracting increased attention due to environmental concerns and the realization that global petroleum resources are finite. Bio-based polymers not only replace existing polymers in a number of applications but also provide new combinations of properties for new applications. A range of bio-based polymers are presented in this review, focusing on general methods of production, properties, and commercial applications. The review examines the technological and future challenges discussed in bringing these materials to a wide range of applications, together with potential solutions, as well as discusses the major industry players who are bringing these materials to the market.

Gadolinium-chitosan nanoparticles as a novel contrast agent for potential use in clinical bowel-targeted MRI: a feasibility study in healthy rats

BACKGROUND

MRI is of increasing importance in the diagnostic evaluation of gastrointestinal diseases, with depiction of mucosal enhancement obtained with conventional intravenous contrast. Routine clinical use of contrast agents has been carried out using intravenous injection for mucosal imaging. Contrast agents that specifically target the intestinal mucosa are therefore needed to improve clinical imaging of the mucosal surface.

PURPOSE

To synthesize a novel contrast agent for gadopentetic acid (Gd-DTPA)-loaded chitosan nanoparticles and observe the absorption of the nanoparticles in the colon wall of healthy rats by MR imaging in vivo.

MATERIAL AND METHODS

A contrast agent was successfully synthesized by a modified emulsion coalescence method, and the resulting agents were characterized in detail by dynamic light-scattering spectroscopy and inductively coupled plasma emission spectroscopy. The cytotoxicity of Gd-chitosan nanoparticles was evaluated by an MTT assay. Gadolinium-chitosan (Gd@chitosan) nanoparticles were administered to the colon mucosa of healthy rats by rectal administration, and MRI scans in vivo were carried out with a 3.0 T imaging scanner at various time points.

RESULTS

The prepared Gd@chitosan nanoparticles were ~420 nm in diameter with a 74.4% Gd-DTPA content. The MTT assay indicated little cytotoxicity. MRI results showed that nanoparticles can be retained in both the stratum submucosum and epithelial cells of the colon for almost 80 min. Transmission electron microscopy images further revealed that Gd@chitosan nanoparticles were localized inside the mucosal cells or intercellular space, while tissue from Gd-DTPA aqueous solution administration showed nothing. Due to the infusion of Gd@chitosan nanoparticles, the MR signal intensity of colon mucosa increased from about 6% to 35%, and the contrast enhancement was highest at 20 min after administration.

CONCLUSION

Gd@chitosan nanoparticles with high Gd-DTPA content were successfully prepared for use as a novel MRI contrast agent. All results indicated that rectally administered Gd@chitosan nanoparticles have the potential for MRI diagnosis of colon mucosal disease.

Preliminary pharmacology of galactosylated chitosan/5-fluorouracil nanoparticles and its inhibition of hepatocellular carcinoma in mice

Biodegradable polymer nanoparticle drug delivery systems are characterized by targeted drug delivery, improved pharmacokinetic and biodistribution, enhanced drug stability and lowered side effects; these drug delivery systems are widely used for delivery of cytotoxic agents. The galactosylated chitosan (GC)/5-fluorouracil (5-FU) nanoparticle is a nanomaterial made by coupling GC, a polymer known to have the advantages described above, and 5-FU. The GC/5-FU nanoparticle is a sustained release system, it was showed that the peak time, half-life time, mean residence time (MRT) and area of under curve (AUC) of GC/5-FU were longer or more than those of the 5-FU group, but the maximum concentration (Cmax) was lower. The distribution of GC/5-FU in vivo revealed the greatest accumulation in the hepatic cancer tissues, and the hepatic cell was the target of the nanoparticles. Toxicology research showed that the toxicity of GC-5-FU was lower than that of 5-FU in mice. In vivo experiments showed that GC/5-FU can significantly inhibit tumor growth in an orthotropic liver cancer mouse model. GC/5-FU treatment can significantly lower the tumor weight and increase the survival time of mice when compared with 5-FU treatment alone. Flow cytometry and the TUNEL assay revealed that compared with 5-FU, GC/5-FU caused higher rates of G 0-G 1 arrest and apoptosis in hepatic cancer cells.

Prospects of pharmaceuticals and biopharmaceuticals loaded microparticles prepared by double emulsion technique for controlled delivery

Several methods and techniques are potentially useful for the preparation of microparticles in the field of controlled drug delivery. The type and the size of the microparticles, the entrapment, release characteristics and stability of drug in microparticles in the formulations are dependent on the method used. One of the most common methods of preparing microparticles is the single emulsion technique. Poorly soluble, lipophilic drugs are successfully retained within the microparticles prepared by this method. However, the encapsulation of highly water soluble compounds including protein and peptides presents formidable challenges to the researchers. The successful encapsulation of such compounds requires high drug loading in the microparticles, prevention of protein and peptide degradation by the encapsulation method involved and predictable release, both rate and extent, of the drug compound from the microparticles. The above mentioned problems can be overcome by using the double emulsion technique, alternatively called as multiple emulsion technique. Aiming to achieve this various techniques have been examined to prepare stable formulations utilizing w/o/w, s/o/w, w/o/o, and s/o/o type double emulsion methods. This article reviews the current state of the art in double emulsion based technologies for the preparation of microparticles including the investigation of various classes of substances that are pharmaceutically and biopharmaceutically active.

Novel strategies to improve the anticancer action of 5-fluorouracil by using drug delivery systems

Because of the fundamental importance of new therapeutic routes for cancer treatment, a number of systems based on colloidal particles as vehicles for the delivery of the anticancer drug 5-fluorouracil have been devised. The target is always to provide the proper dose of the antitumor agent only at the desired locus of action, thus reducing the unwanted side effects. In this review, the main strategies and the more significant results in the development of 5-fluorouracil carriers for cancer treatment are discussed.

Effect of various formulation parameters on the properties of polymeric nanoparticles prepared by multiple emulsion method

This work evaluates and interprets underlying mechanisms behind various aspects related to preparation and physical characteristics of polymeric nanoparticles (NP). These were prepared from different biodegradable polymers according to a water-in-oil-in-water emulsion solvent evaporation method. Polymers used were poly(lactic-co-glycolic) acid (PLGA), poly (lactic acid) (PLA), (PLA-PEG-PLA) triblock and (PLA-PEG-PLA)n multi-block co-polymers. A model DNA, as an example of a hydrophilic drug, was encapsulated in the internal aqueous phase. The primary emulsion was prepared using a high shear turbine mixer. The secondary emulsion was prepared by high-pressure homogenization. Surface morphology and internal structure were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Influence of process variables on the physical properties of NP has been studied. Release of DNA was evaluated. In addition, changes occurring to NP porosity and surface area during degradation were followed. Nanoparticle size was ranging between 200-700 nm, according to the preparation conditions. Homogenizing pressure, concentration of the emulsifying agent used, polymer concentration and type and the concentration of a cryoprotectant had variable effects on NP size, surface area and porosity. Batches of NP where no emulsifying agent was added were obtained successfully. The release rate of the DNA from NP was mainly dependent on porosity, which varied significantly among used polymers. The preparation technique was efficient in encapsulating the model DNA and will be used for plasmid encapsulation in a future work.

Gadolinium diethylenetriaminopentaacetic acid-loaded chitosan microspheres for gadolinium neutron-capture therapy

In order to provide a suitable device that would contain water-soluble drugs, highly water-soluble gadolinium diethylenetriaminopentaacetic acid-loaded chitosan microspheres (CMS-Gd-DTPA) were prepared by the emulsion method using glutaraldehyde as a cross-linker and Span 80 as a surfactant for gadolinium neutron-capture therapy of cancer. The gadolinium content and the mass median diameter of CMS-Gd-DTPA were estimated. The size and morphology of the CMS-Gd-DTPA were strongly influenced by the initial applied weight ratio of Gd-DTPA:chitosan. FTIR spectra showed that the electrostatic interaction between chitosan and Gd-DTPA accelerated the formation of gadolinium-enriched chitosan microspheres. Sufficient amounts of glutaraldehyde and Span 80 were necessary for producing discrete CMS-Gd-DTPA. The CMS-Gd-DTPA having a mass median diameter 11.7microm and 11.6% of gadolinium could be used in Gd-NCT following intratumoral injection.

One-step preparation of polyelectrolyte-coated PLGA microparticles and their functionalization with model ligands

This work aimed at the development of a novel surfactant-free, one-step process for the concomitant formation of poly(lactide-co-glycolide) (PLGA) microparticles (MP) and surface coating with the polyelectrolyte chitosan, which is suitable for subsequent covalent conjugation of bioactive ligands. The technology is based on solvent extraction from an O/W-dispersion using a static micromixer. Surface coating occurred through interaction of the negatively charged, nascent PLGA MP with the polycationic chitosan, which was dissolved in the aqueous extraction fluid. Particles of 1-10 mum in diameter were produced with excellent reproducibility. The chitosan-coated PLGA MP were spherical and showed a smooth surface without pores, as demonstrated by scanning electron microscopy (SEM). The chitosan coatings were characterized by zeta potential measurements and X-ray photoelectron spectroscopy (XPS). The functional amino groups of chitosan were used to conjugate two model ligands to the coating, i.e. fluorescamine and NHS-PEG-biotin. The presence of the conjugated ligands was revealed by confocal laser scanning microscopy (CLSM) and fluorescence activated cell sorting (FACS). Evidence for biotinylation was demonstrated through binding of fluorescently labelled streptavidin. The developed platform technology is straightforward and flexible. Future studies will focus on the design of microparticulate carriers with bioactive surfaces, e.g. as antigen delivery systems.

NMR and confocal microscopy studies of the mechanisms of burst drug release from PLGA microspheres

Pulsed-field gradient (PFG) NMR and confocal microscopy techniques have been used to study the structural evolution and drug release profile of poly(d,l-lactide-co-glycolide) (PLGA) microspheres over time during immersion in an aqueous phase. Variation of the drying process used in the synthesis of the PLGA microspheres has been found to significantly influence the degree of permeability of the spheres to water. PFG NMR has been used to study the change in the cavity sizes within the pore structure of the microspheres over time following initial immersion. In these studies, the temperature of the secondary emulsion, used in the sphere synthesis, has been found to significantly change the temporal evolution of the pore structure. Confocal microscopy studies of the release of a model drug from within the microspheres suggest that the rate-limiting step in drug release is the swelling rate of the polymer matrix, and that the mechanism may be a percolation process. These studies also showed that the local rate of drug release is heterogeneously distributed across a microsphere, and thus, strictly, cannot be modelled as purely a simple diffusive release process from a sphere.

A single treatment with microcapsules containing a CXCR4 antagonist suppresses pulmonary metastasis of murine melanoma

Biodegradable poly D,L-lactic acid (PLA, molecular weight: ca. 5000) microcapsules containing a CXCR4 antagonist (4F-benzoyl-TE14011) were prepared (4F-benzoyl-TE14011-PLA), and their anti-metastatic activity was evaluated in mice. A single subcutaneous administration of 4F-benzoyl-TE14011-PLA significantly reduced the number of colonies formed by pulmonary metastasis of B16-BL6 melanoma cells expressing CXCR4. The same dose of 4F-benzoyl-TE14011 in a single or a series of treatments affected little. The substance 4F-benzoyl-TE14011 dose-dependently suppressed B16-BL6 cell growth. In the cells cultured with SDF-1, a more potent suppression was observed. 4F-Benzoyl-TE14011 was rapidly released from 4F-benzoyl-TE14011-PLA for an initial period, both in vitro and in vivo. A steady release was thereafter observed. Therefore, this drug release profile might contribute to prevention of melanoma metastasis at the steps involving the migration and cell growth. These results also show that a sustained drug release formulation could be a useful drug delivery system for CXCR4 antagonists.

Chitosan microspheres as a potential carrier for drugs

Chitosan is a biodegradable natural polymer with great potential for pharmaceutical applications due to its biocompatibility, high charge density, non-toxicity and mucoadhesion. It has been shown that it not only improves the dissolution of poorly soluble drugs but also exerts a significant effect on fat metabolism in the body. Gel formation can be obtained by interactions of chitosans with low molecular counterions such as polyphosphates, sulphates and crosslinking with glutaraldehyde. This gelling property of chitosan allows a wide range of applications such as coating of pharmaceuticals and food products, gel entrapment of biochemicals, plant embryo, whole cells, microorganism and algae. This review is an insight into the exploitation of the various properties of chitosan to microencapsulate drugs. Various techniques used for preparing chitosan microspheres and evaluation of these microspheres have also been reviewed. This review also includes the factors that affect the entrapment efficiency and release kinetics of drugs from chitosan microspheres.

Drug delivery to Brain by Microparticulate Systems

The site specific delivery of chemotherapeutic agents allows maximum concentration of an agent at a desired body site. This area specific drug delivery decreases the unwanted systemic distribution and decreases toxicity of the administered drugs. Blood-Brain Barrier (BBB) is considered to be an obstacle in delivering large number of drugs to brain. The endothelial cells forming the tubular capillaries in the brain are cemented together by intercellular tight junctions. In this way, the BBB has an important role in providing a stable extracellular environment in the central nervous system. Lack of fenestrations, very few pinocytotic vesicles, and more mitochondria are other differences of the brain capillaries which play important role in transport of drugs to brain (Fig.1). The purpose of this paper is to summarise the methods for BBB permeability modifications and to focus on various examples in delivering drugs, especially neuroncology and neuroactive drugs, to brain by microparticulate systems.

Recent progress in drug delivery systems for anticancer agents

Recent progress in understanding the molecular basis of cancer brought out new materials such as oligonucleotides, genes, peptides and proteins as a source of new anticancer agents. Due to their macromolecular properties, however, new strategies of delivery for them are required to achieve their full therapeutic efficacy in clinical setting. Development of improved dosage forms of currently marketed anticancer drugs can also enhance their therapeutic values. Currently developed delivery systems for anticancer agents include colloidal systems (liposomes, emulsions, nanoparticles and micelles), polymer implants and polymer conjugates. These delivery systems have been able to provide enhanced therapeutic activity and reduced toxicity of anticancer agents mainly by altering their pharmacokinetics and biodistribution. Furthermore, the identification of cell-specific receptor/antigens on cancer cells have brought the development of ligand- or antibody-bearing delivery systems which can be targeted to cancer cells by specific binding to receptors or antigens. They have exhibited specific and selective delivery of anticancer agents to cancer. As a consequence of extensive research, clinical development of anticancer agents utilizing various delivery systems is undergoing worldwide. New technologies and multidisciplinary expertise to develop advanced drug delivery systems, applicable to a wide range of anticancer agents, may eventually lead to an effective cancer therapy in the future.

Changes in cisplatin delivery due to surface-coated poly (lactic acid)-poly(epsilon-caprolactone) microspheres

Smooth muscle cell proliferation plays a major role in the genesis of restenosis after angioplasty or vascular injury. Local delivery of agents capable of modulating vascular responses, have the potential to prevent restenosis. However, the development of injectable microspheres for sustained drug delivery to the arterial wall is a major challenge. We demonstrated the possibility of entrapping an antiproliferative agent, cisplatin, in a series of surface coated biodegradable microspheres composed of poly(lactic acid)poly(caprolactone) blends, with a mean diameter of 2-10 pm. The microspheres were surface coated with poly ethylene glycol (PEG), chitosan (Chit), or alginate (Alg). A solution of cisplatin and a 50:50 blend of polylactic acid (PLA)-polycaprolactone (PCL) dissolved in acetone-dichloromethane mixture was poured into an aqueous solution of PEG (or polyvinyl alcohol or Chit or Alg) with stirring using a high speed homogenizer, for the formation of microspheres. Cisplatin recovery in microspheres ranged from 25-45% depending on the emulsification system used for the preparations. Scanning electron microscopy revealed that the PLA-PCL microspheres were spherical in shape and had a smooth surface texture. The amount of drug release was much higher initially (20-30%), this was followed by a constant slow-release profile for a 30-day period of study. It has been found that drug release depends on the amount of entrapped drug, on the presence of extra cisplatin in the dispensing phase, and on the polymer coatings. This PEG or Alg-coated PLA/PCL microsphere formulation may have potential for the targeted delivery of antiproliferative agents to treat restenosis.