Polymers for mucoadhesive drug delivery system: a current status

Synthesis of Amphiphilic Amino Poly-Amido-Saccharide and Poly(lactic) Acid Block Copolymers and Fabrication of Paclitaxel-Loaded Mucoadhesive Nanoparticles

Drug delivery to the esophagus through systemic administration remains challenging, as minimal drug reaches the desired target. Local delivery offers the potential for improved efficacy while minimizing off-target toxicities but necessitates bioadhesive properties for mucosal delivery. Herein, we describe the synthesis of two new mucoadhesive amphiphilic copolymers prepared by sequential ring-opening copolymerization or postpolymerization click conjugation. Both strategies yield block copolymers containing a hydrophilic amine-functionalized poly-amido-saccharide and either a hydrophobic alkyl derivatized poly-amido-saccharide or poly(lactic acid), respectively. The latter resulting copolymers readily self-assemble into spherical, ≈200 nm diameter, positively charged mucoadhesive nanoparticles. The NPs entrap ultrahigh levels of paclitaxel via encapsulation of free paclitaxel and paclitaxel conjugated to a biodegradable, biocompatible poly(1,2-glycerol carbonate). Paclitaxel-loaded NPs rapidly enter cells, release paclitaxel, are cytotoxic to esophageal OE33 and OE19 tumor cells in vitro, and, importantly, demonstrate improved mucoadhesion compared to conventional poly(ethylene glycol)-poly(lactic acid) nanoparticles to ex vivo esophageal tissue.

Nano-Assembled Polyphosphazene Delivery System Enables Effective Intranasal Immunization with Nipah Virus Subunit Vaccine

The ultimate vaccine against infections caused by Nipah virus should be capable of providing protection at the respiratory tract─the most probable port of entry for this pathogen. Intranasally delivered vaccines, which target nasal-associated lymphoid tissue and induce both systemic and mucosal immunity, are attractive candidates for enabling effective vaccination against this lethal disease. Herein, the water-soluble polyphosphazene delivery vehicle assembles into nanoscale supramolecular constructs with the soluble extracellular portion of the Hendra virus attachment glycoprotein─a promising subunit vaccine antigen against both Nipah and Hendra viruses. These supramolecular constructs signal through Toll-like receptor 7/8 and promote binding interactions with mucin─an important feature of effective mucosal adjuvants. High mass contrast of phosphorus-nitrogen backbone of the polymer enables a successful visualization of nanoconstructs in their vitrified state by cryogenic electron microscopy. Here, we characterize the self-assembly of polyphosphazene macromolecule with biologically relevant ligands by asymmetric flow field flow fractionation, dynamic light scattering, fluorescence spectrophotometry, and turbidimetric titration methods. Furthermore, a polyphosphazene-enabled intranasal Nipah vaccine candidate demonstrates the ability to induce immune responses in hamsters and shows superiority in inducing total IgG and neutralizing antibodies when benchmarked against the respective clinical stage alum adjuvanted vaccine. The results highlight the potential of polyphosphazene-enabled nanoassemblies in the development of intranasal vaccines.

Stability and biological activity enhancement of fucoxanthin through encapsulation in alginate/chitosan nanoparticles

A response surface methodology based on the Box-Behnken design was employed to develop fucoxanthin (FX) delivery nanocarrier from alginate (ALG) and chitosan (CS). The FX-loaded ALG/CS nanoparticles (FX-ALG/CS-NPs) were fabricated using oil-in-water emulsification and ionic gelation. The optimal formulation consisted of an ALG:CS mass ratio of 0.015:1, 0.71 % w/v Tween™ 80, and 5 mg/mL FX concentrations. The resulting FX-ALG/CS-NPs had a size of 227 ± 23 nm, a zeta potential of 35.3 ± 1.7 mV, and an encapsulation efficiency of 81.2 ± 2.8 %. These nanoparticles exhibited enhanced stability under simulated environmental conditions and controlled FX release in simulated gastrointestinal fluids. Furthermore, FX-ALG/CS-NPs showed increased in vitro oral bioaccessibility, gastrointestinal stability, antioxidant activity, anti-inflammatory effect, and cytotoxicity against various cancer cells. The findings suggest that ALG/CS-NPs are effective nanocarriers for the delivery of FX in nutraceuticals, functional foods, and pharmaceuticals.

Revolutionizing Brain Drug Delivery: Buccal Transferosomes on the Verge of a Breakthrough

The buccal cavity, also known as the oral cavity, is a complex anatomical structure that plays a crucial role in various physiological processes. It serves as a gateway to the digestive system and facilitates the initial stages of food digestion and absorption. However, its significance extends beyond mere digestion as it presents a promising route for drug delivery, particularly to the brain. Transferosomes are lipid-based vesicles that have gained significant attention in the field of drug delivery due to their unique structure and properties. These vesicles are composed of phospholipids that form bilayer structures capable of encapsulating both hydrophilic and lipophilic drugs. Strategies for the development of buccal transferosomes for brain delivery have emerged as promising avenues for pharmaceutical research. This review aims to explore the various approaches and challenges associated with harnessing the potential of buccal transferosomes as a means of enhancing drug delivery to the brain. By understanding the structure and function of both buccal tissue and transferosomes, researchers can develop effective formulation methods and characterization techniques to optimize drug delivery. Furthermore, strategic approaches and success stories in buccal transferosome development are highlighted, showcasing inspiring examples that demonstrate their potential to revolutionize brain delivery.

Intestinal retentive systems - recent advances and emerging approaches

Intestinal retentive devices (IRDs) are devices designed to anchor within the lumen of the intestines for long-term residence in the gastrointestinal tract. IRDs can enable impactful medical device technologies including sustained oral drug delivery systems, indwelling sensors, or real-time diagnostics. The design and testing of IRDs present a myriad of challenges, including precise deployment of the device at desired intestinal locations, secure anchoring within the gastrointestinal tract to allow for natural function, and safe removal of the IRD at user-defined times. Advancing the state-of-the-art of IRD is an interdisciplinary effort that requires innovations such as new materials, novel anchoring mechanisms, and medical device design with consistent input from clinical practitioners and end-users. This perspective briefly reviews the current state-of-the-art for IRDs and charts a path forward to inform the design of future concepts. Specifically, this article will highlight materials, retention mechanisms, and test beds to measure the efficacy of IRDs and their mechanisms. Finally, potential synergies between IRD and other medical device technologies are presented to identify future opportunities.

Formulation and Evaluation of Prednisolone Sodium Metazoate-Loaded Mucoadhesive Quatsomal Gel for Local Treatment of Recurrent Aphthous Ulcers: Optimization, In Vitro, Ex Vivo, and In Vivo Studies

This study aims to formulate a buccal mucoadhesive gel containing prednisolone sodium metazoate-loaded quatsomes for efficient localized therapy of recurrent aphthous ulcers. Quatsomes were prepared using a varied concentration of quaternary ammonium surfactants (QAS) and cholesterol (CHO). A 2³ factorial design was conducted to address the impact of independent variables QAS type (X₁), QAS to CHO molar ratio (X₂), and sonication time (X₃). The dependent variables were particle size (PS; Y₁), polydispersity index (PDI; Y₂), zeta potential (ZP; Y₃), entrapment efficiency percent (EE%; Y₄) and percent of drug released after 6 h (Q6%: Y₅). Then, the selected quatsomes formula was incorporated into different gel bases to prepare an optimized mucoadhesive gel to be evaluated via in vivo study. The PS of the developed quatsomes ranged from 69.47 ± 0.41 to 113.28 ± 0.79 nm, the PDI from 0.207 ± 0.004 to 0.328 ± 0.004, ZP from 45.15 ± 0.19 to 68.1 ± 0.54 mV, EE% from 79.62 ± 1.44 to 98.60% ± 1.22 and Q6% from 58.39 ± 1.75 to 94.42% ± 2.15. The quatsomal mucoadhesive gel showed rapid recovery of ulcers, which was confirmed by the histological study and the evaluation of inflammatory biomarkers. These results assured the capability of the developed quatsomal mucoadhesive gel to be a promising formulation for treating buccal diseases.

Buccal delivery of small molecules and biologics: Of mucoadhesive polymers, films, and nanoparticles - An update

Buccal delivery of small and large molecules is an attractive route of administration that has been studied extensively over the past few decades. This route bypasses first-pass metabolism and can be used to deliver therapeutics directly to systemic circulation. Moreover, buccal films are efficient dosage forms for drug delivery due to their simplicity, portability, and patient comfort. Films have traditionally been formulated using conventional techniques, including hot-melt extrusion and solvent casting. However, newer methods are now being exploited to improve the delivery of small molecules and biologics. This review discusses recent advances in buccal film manufacturing, using the latest technologies, such as 2D and 3D printing, electrospraying, and electrospinning. This review also focuses on the excipients used in the preparation of these films, with emphasis on mucoadhesive polymers and plasticizers. Along with advances in manufacturing technology, newer analytical tools have also been used for the assessment of permeation of the active agents across the buccal mucosa, the most critical biological barrier and limiting factor of this route. Additionally, preclinical and clinical trial challenges are discussed, and some small molecule products already on the market are explored.

Microenvironmental pH Modification in Buccal/Sublingual Dosage Forms for Systemic Drug Delivery

Many drug candidates are poorly water-soluble. Microenvironmental pH (pH_M) modification in buccal/sublingual dosage forms has attracted increasing interest as a promising pharmaceutical strategy to enhance the oral mucosal absorption of drugs with pH-dependent solubility. Optimizing drug absorption at the oral mucosa using pH_M modification is considered to be a compromise between drug solubility and drug lipophilicity (Log D)/permeation. To create a desired pH_M around formulations during the dissolution process, a suitable amount of pH modifiers should be added in the formulations, and the appropriate methods of pH_M measurement are required. Despite pH_M modification having been demonstrated to be effective in enhancing the oral mucosal absorption of drugs, some potential risks, such as oral mucosal irritation and teeth erosion caused by the pH modifiers, should not been neglected during the formulation design process. This review aims to provide a short introduction to the pH_M modification concept in buccal/sublingual dosage forms, the properties of saliva related to pH_M modification, as well as suitable drug candidates and pH modifiers for pH_M modifying buccal/sublingual formulations. Additionally, the methods of pH_M measurement, pH_M modification methods and the corresponding challenges are summarized in the present review.

Enhancing Stability and Mucoadhesive Properties of Chitosan Nanoparticles by Surface Modification with Sodium Alginate and Polyethylene Glycol for Potential Oral Mucosa Vaccine Delivery

Background: The present study aimed to fabricate surface-modified chitosan nanoparticles with two mucoadhesive polymers (sodium alginate and polyethylene glycol) to optimize their protein encapsulation efficiency, improve their mucoadhesion properties, and increase their stability in biological fluids. Method: Ionotropic gelation was employed to formulate chitosan nanoparticles and surface modification was performed at five different concentrations (0.05, 0.1, 0.2, 0.3, 0.4% w/v) of sodium alginate (ALG) and polyethylene glycol (PEG), with ovalbumin (OVA) used as a model protein antigen. The functional characteristics were examined by dynamic light scattering (DLS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM)/scanning transmission electron microscopy (STEM). Stability was examined in the presence of simulated gastric and intestinal fluids, while mucoadhesive properties were evaluated by in vitro mucin binding and ex vivo adhesion on pig oral mucosa tissue. The impact of the formulation and dissolution process on the OVA structure was investigated by sodium dodecyl-polyacrylamide gel electrophoresis (SDS-PAGE) and circular dichroism (CD). Results: The nanoparticles showed a uniform spherical morphology with a maximum protein encapsulation efficiency of 81%, size after OVA loading of between 200 and 400 nm and zeta potential from 10 to 29 mV. An in vitro drug release study suggested successful nanoparticle surface modification by ALG and PEG, showing gastric fluid stability (4 h) and a 96 h sustained OVA release in intestinal fluid, with the nanoparticles maintaining their conformational stability (SDS-PAGE and CD analyses) after release in the intestinal fluid. An in vitro mucin binding study indicated a significant increase in mucin binding from 41 to 63% in ALG-modified nanoparticles and a 27–49% increase in PEG-modified nanoparticles. The ex vivo mucoadhesion showed that the powdered particles adhered to the pig oral mucosa. Conclusion: The ALG and PEG surface modification of chitosan nanoparticles improved the particle stability in both simulated gastric and intestinal fluids and improved the mucoadhesive properties, therefore constituting a potential nanocarrier platform for mucosal protein vaccine delivery.

Recent advances in electrospun nanofiber vaginal formulations for women's sexual and reproductive health

Electrospinning is an innovative technique that allows production of nanofibers and microfibers by applying a high voltage to polymer solutions of melts. The properties of these fibers - which include high surface area, high drug loading capacity, and ability to be manufactured from mucoadhesive polymers - may be particularly useful in a myriad of drug delivery and tissue engineering applications. The last decade has witnessed a surge of interest in the application of electrospinning technology for the fabrication of vaginal drug delivery systems for the treatment and prevention of diseases associated with women's sexual and reproductive health, including sexually transmitted infections (e.g. infection with human immunodeficiency virus and herpes simplex virus) vaginitis, preterm birth, contraception, multipurpose prevention technology strategies, cervicovaginal cancer, and general maintenance of vaginal health. Due to their excellent mechanical properties, electrospun scaffolds are also being investigated as next-generation materials in the surgical treatment of pelvic organ prolapse. In this article, we review the latest advances in the field.

Achievements in Thermosensitive Gelling Systems for Rectal Administration

Rectal drug delivery is an effective alternative to oral and parenteral treatments. This route allows for both local and systemic drug therapy. Traditional rectal dosage formulations have historically been used for localised treatments, including laxatives, hemorrhoid therapy and antipyretics. However, this form of drug dosage often feels alien and uncomfortable to a patient, encouraging refusal. The limitations of conventional solid suppositories can be overcome by creating a thermosensitive liquid suppository. Unfortunately, there are currently only a few studies describing their use in therapy. However, recent trends indicate an increase in the development of this modern therapeutic system. This review introduces a novel rectal drug delivery system with the goal of summarising recent developments in thermosensitive liquid suppositories for analgesic, anticancer, antiemetic, antihypertensive, psychiatric, antiallergic, anaesthetic, antimalarial drugs and insulin. The report also presents the impact of various types of components and their concentration on the properties of this rectal dosage form. Further research into such formulations is certainly needed in order to meet the high demand for modern, efficient rectal gelling systems. Continued research and development in this field would undoubtedly further reveal the hidden potential of rectal drug delivery systems.

Development of Mucoadhesive Buccal Film for Rizatriptan: In Vitro and In Vivo Evaluation

The reduced therapeutic efficacy of rizatriptan in migraine treatment is primarily due to low oral bioavailability and extensive first pass metabolism. The purpose of this investigation was to optimize the thin mucoadhesive buccal film of rizatriptan and assess the practicability of its development as a potential substitute for conventional migraine treatment. Buccal films (FR1-FR10) were fabricated by a conventional solvent casting method utilizing a combination of polymers (Proloc, hydroxypropyl methylcellulose and Eudragit RS 100). Drug-loaded buccal films (F1-F4) were examined for mechanical, mucoadhesive, swelling and release characteristics. In vivo pharmacokinetics parameters of selected buccal film (F1) in rabbits were compared to oral administration. Films F1-F4 displayed optimal physicomechanical properties including mucoadhesive strength, which can prolong the buccal residence time. A biphasic, complete and higher drug release was seen in films F1 and F4, which followed Weibull model kinetics. The optimized film, F1, exhibited significantly higher (p < 0.005) rizatriptan buccal flux (71.94 ± 8.26 µg/cm²/h) with a short lag time. Film features suggested the drug particles were in an amorphous form, compatible with the polymers used and had an appropriate surface morphology suitable for buccal application. Pharmacokinetic data indicated a significantly higher rizatriptan plasma level (p < 0.005) and C_max (p < 0.0001) upon buccal film application as compared to oral solution. The observed AUC_0-12h (994.86 ± 95.79 ng.h/mL) in buccal treatment was two-fold higher (p < 0.0001) than the control, and the relative bioavailability judged was 245%. This investigation demonstrates the prospective of buccal films as a viable and alternative approach for effective rizatriptan delivery.

Formulation and evaluation of mucoadhesive buccal tablets of aceclofenac

This project was aimed to formulate and characterize mucoadhesive buccal tablets of aceclofenac, utilizing different proportions of three polymers carbopol 934, hydroxypropyl methylcellulose, and sodium carboxymethylcellulose. Twelve batches of buccoadhesive aceclofenac were prepared by the direct compression method. The compressed tablets were then evaluated for physicochemical parameters such as hardness, thickness, weight variation, drug content, friability, swelling index, surface pH, and ex vivo mucoadhesion. In vitro dissolution test was conducted for 12 h according to Indian Pharmacopeia 2018, using the rotating paddle method in phosphate buffer of pH 7.4. Physiochemical parameters like weight variation (231.25–268.75 mg), hardness (8.32–11.56 kg), friability (0.04–0.2%), diameter (9.00 mm), thickness (3.8–4.05 mm), and drug content ((97.67–102.25%) were within the acceptable limit as per Indian Pharmacopeia 2018. The swelling index was reported to be in the range of 112.93–450.19%, at 8 h. The surface pHs of all the batches were in between 6.72 to 6.96. The mucoadhesive strengths (40.5–50 g) varied with the change in polymer concentrations especially of carbopol 934. The dissolution profile of all the batches varied greatly, with a maximum release of 109.41% (in batch 12 at 6 h) to a minimum release of 44.82% (in batch 3 at 12 h). Among them, only batch 1 ensured sustained and effective drug release (88.34% at 12 h) with appropriate swelling index (112.93%) and mucoadhesive strength (40 g). Fourier Transform Infrared Spectroscopy analysis showed no evidence of drug excipients interaction. Hence, the results concluded that buccal mucoadhesive aceclofenac tablets can be formulated. Furthermore, the property of the tablet not only depends on the concentration but also the behavior of the polymers used.

Oromucosal precursors of in loco hydrogels for wound-dressing and drug delivery in oral mucositis: Retain, resist, and release

Oromucosal films and tablets were developed as multifunctional biomaterials for the treatment of oral mucositis. These are intended to function as a hybrid, performing as a controlled drug delivery system and as a wound-dressing device. The dosage forms are precursors for in loco hydrogels that are activated by the saliva. An anti-inflammatory and anesthetic activity is attained from budesonide tripartite polymeric nanoparticles and lidocaine, while the polymeric network allows the protection and cicatrization of the wound. Different biomaterials and blends were investigated, focusing on the capacity to retain and resist on-site, as well as achieve a long-lasting controlled release. As the limiting factor, the choice was made according to the films' results. A polymer mix of Methocel™ K100M and Carbopol® (974P, EDT 2020, or Ultrez 10) blends were used. Overall, regrading critical factors, Carbopol® increased films' elasticity and flexibility, mucoadhesion, and the strength of the hydrogels, while higher concentrations led to thicker, more opaque, and lower strain resistance products. Whereas 974P and Ultrez 10 performed similarly, EDT 2020 led to uniformity problems and weaker films, hydrogels and bioadhesion. The optimized products were enhanced with sodium hyaluronate and drug-loaded for further characterization. Concerning the dosage form, the films' hydrogels were more resilient, while the tablets had higher mucoadhesiveness and longer swelling. Although through different networks and mechanisms, both dosage forms and grades revealed similar release profiles. A Case II time-evolving stereoselectivity for the 22R and 22S budesonide epimers was found, and Fickian-diffusion for lidocaine. Ultimately, the developed formulations show great potential to be used in OM management. Both of the selected grades at 0.6% displayed excellent performance, while Ultrez 10 can be preferable for the films' production due to its lower viscosity before neutralization and higher after activation. Where the tablets are easier to produce and offer better adhesion, the films are more customizable post-production and have higher rheological performance for wound-dressing.

Development and Evaluation of a Novel Oral Mucoadhesive Ointment Containing Pomegranate Peel Extract as an Adjuvant for Oral Hygiene of Dogs

Herbal therapies are used worldwide to treat a variety of health conditions, including dental conditions in veterinary medicine. In this context, the use of medicinal plant-based formulations as potential therapeutics and preventatives in veterinary dentistry is worth highlighting. The objective of the present study was to develop a mucoadhesive ointment formulation, named orabase, that contained pomegranate extract for use in the oral cavity of dogs, with the aim of improving their oral hygiene. The hydroalcoholic extracts of pomegranate peels was incorporated into the orabase in 3 different concentrations. The formulations were subjected to in vitro microbiological testing by a modified disc-diffusion method to study the susceptibility of microorganisms collected from the oral cavities of the dogs. The samples were taken from the buccal mucosa of dogs having the same management and diet. The most effective formulation was submitted to physicochemical tests to evaluate the functionality of the product, namely pH, swelling index, spreadability, and mechanical properties (hardness, cohesiveness, and adhesiveness). The formulation containing 25.0% w/w of the extract was considered most suitable for the intended use as it showed antiseptic activity and demonstrated a swelling index of approximately 35% in the first 20 minutes of the test, high spreadability, and suitable mechanical properties. The results suggest that the product obtained from pomegranate peel extract is a viable option for use to improve oral hygiene, helping to reduce the bacterial component of dental plaque in dogs.

Effects of medicated enema and nasal drops using Triphaladi oil in the management of obesity - A pilot study

An open label, randomized, comparative, interventional pilot study was done to assess the effect of Lekhana Basti (medicated enema) and Rechana Nasya Karma (Errhine therapy) in the management of Sthoulya with special reference to obesity. In the study 30 clinically diagnosed patient of either sex were randomly divided into two groups. In Basti group, Lekhana Basti in Karma Basti manner was given for 30 days. Anuvasana Basti (enema with Triphaladi Taila) in the dose of 120 mL and Asthapana Basti (enema with Triphaladi decoction etc.) in the dose of approximately 960 mL was given. In Nasya group, Rechananasya on alternate days was given with Triphaladi (oil) in the dose of 0.5 mL per nostril for total 28 days. The patients were assessed on objective criteria such as such as weight, chest circumference, mid-arm circumference, mid-thigh circumference, triceps skin fold thickness, sub-scapular skin fold thickness, abdominal skin fold thickness, waist-hip ratio and lipid profile. It was observed that Basti group was a better intervention in providing relief, however there intergroup standard deviation was low on most of the variable expect the lipid profile. The results suggest that the Nasya Karma may be developed as a better practical approach in obesity management.

Advanced Approaches of Bioactive Peptide Molecules and Protein Drug Delivery Systems

Despite the fact that protein and peptide therapeutics are widely employed in the treatment of various diseases, their delivery is posing an unembellished challenge to the scientists. It was discovered that delivery of these therapeutic systems through oral route is easy with high patient compliance. However, proteolytic degradation and absorption through the mucosal epithelium are the barriers in this route. These issues can be minimized by the use of enzyme inhibitors, absorption enhancers, different carrier systems or either by direct modification. In the process of investigation, it was found that transdermal route is not posing any challenges of enzymatic degradation, but, still absorption is the limitation as the outer layer of skin acts as a barrier. To suppress the effect of the barrier and increase the rate of the absorption, various advanced technologies were developed, namely, microneedle technology, iontophoresis, electroporation, sonophoresis and biochemical enhancement. Indeed, even these molecules are targeted to the cells with the use of cell-penetrating peptides. In this review, delivery of the peptide and protein therapeutics using oral, transdermal and other routes is discussed in detail.

Mucoadhesive buccal film of almotriptan improved therapeutic delivery in rabbit model

Administration of almotriptan as an oral therapy is largely limited because of poor aqueous solubility and rather low bioavailability. The aim of present investigation was to formulate oral mucoadhesive film of almotriptan to improve the drug delivery and desired therapeutic effects. Placebo films (F1-F8) were prepared by varying the concentrations of Proloc 15 (7.5-15% w/v) and Eudragit RL 100/RS 100 (15-30% w/v) polymers. Physicomechanical and pharmaceutical characteristics of drug loaded films (FA1-FA4) were examined. Selected FA4 film was evaluated in vivo by assessing the pharmacokinetic profile and compared with oral therapy in rabbits. FA1-FA4 films exhibited excellent physicomechanical properties and rapid hydration. A biphasic and considerably greater drug release (p < 0.05) was observed in FA3 and FA4 films contain higher amount of hydrophilic polymer. The rate of permeation of almotriptan was found to be significantly higher in FA4 than FA3 film (p < 0.005). Fourier transform infrared spectral scan indicates no incompatibility exists between the drug and polymers used. Differential scanning calorimetry thermogram represents the evidence of almotriptan amorphization and molecular dispersion of it in the film. Scanning electron microscopy images shows that FA4 possess good morphological features and hence suitable for use in the buccal application. In vivo data demonstrated rapid and efficient absorption (p < 0.005) of almotriptan with greater AUC_0-12 (>2 folds, p < 0.0001) by FA4 film as compared to oral (control). In general, the data established the potential of FA4 film to improve the therapeutic delivery of almotriptan and offers a promising option in migraine therapy.

Manufacturing Different Types of Solid Dispersions of BCS Class IV Polyphenol (Daidzein) by Spray Drying: Formulation and Bioavailability

Daidzein (DZ) is a polyphenolic compound belonging to Biopharmaceutical Classification System class IV, which shows that it may have limited therapeutic effects due to its low solubility and poor bioavailability. This study aimed to obtain high-purity DZ and prepare and characterize different types of solid dispersions (SDs) in order to enhance aqueous solubility and bioavailability. Excipients were investigated in order to manufacture different types of solid dispersions (SDs). Second-generation solid dispersions (SG), third-generation solid dispersions (TG), and second- and third-generation pH-modulated solid dispersions (SD and TG pHM-SD) were produced via spray drying. The SDs were characterized and tested for in vitro DZ release and oral bioavailability. SDs have shown increased aqueous solubility and in vitro release rate. Solid-state characterization showed that DZ was in an amorphous state in most of the formulations. The enhanced aqueous solubility of TG-pHM SD was reflected by an increase in oral bioavailability, which significantly increased the maximum plasma concentration approximately 20-fold and decreased the time to reach the maximum plasma concentration. The production of pHM SDs that contain DZ via spray drying is a simple and effective approach for oral drug delivery, which has the potential to greatly reduce the dose and enhance therapeutics effects.

Hydrogen bonding-based strongly adhesive coacervate hydrogels synthesized using poly(N-vinylpyrrolidone) and tannic acid

When multiple intermolecular interactions occur simultaneously, complexed molecules undergo gelation by inter-cohesive bonding, inducing a pseudo-crosslinking effect to form a supramolecular gel. Among the number of substances that can induce supramolecular assembly, phenolic species such as 3,4-dihydroxy-l-phenylalanine (DOPA) are widely utilized for synthesizing adhesive materials. However, despite the strong adhesion capability of monomeric phenol, it lacks cohesive strength and rarely forms a supramolecular gel to secure its mechanical properties. In this study, to overcome this obstacle, we synthesized a supramolecular coacervate hydrogel by simply mixing poly(N-vinylpyrrolidone) (PVP) and tannic acid (TA), resulting in strong cohesive interactions by virtue of the larger molecular size of TA and reinforced molecular interactions attributed to the presence of galloyl groups with a high density. We further analyzed the rheological and adhesive properties of PVP-TA coacervate hydrogels, revealing that they could exhibit not only a self-healing property, but also super adhesive properties with an average adhesion strength of 3.71 MPa on a glass substrate, which is >4 times stronger than that of conventional PVP.

Challenges in the local delivery of peptides and proteins for oral mucositis management

Oral mucositis, a common inflammatory side effect of oncological treatments, is a disorder of the oral mucosa that can cause painful ulcerations, local motor disabilities, and an increased risk of infections. Due to the discomfort it produces and the associated health risks, it can lead to cancer treatment restrains, such as the need for dose reduction, cycle delays or abandonment. Current mucositis management has low efficiency in prevention and treatment. A topical drug application for a local action can be a more effective approach than systemic routes when addressing oral cavity pathologies. Local delivery of growth factors, antibodies, and anti-inflammatory cytokines have shown promising results. However, due to the peptide and protein nature of these novel agents, and the several anatomic, physiological and environmental challenges of the oral cavity, their local action might be limited when using traditional delivering systems. This review is an awareness of the issues and strategies in the local delivery of macromolecules for the management of oral mucositis.

Engineering nanomaterials to overcome the mucosal barrier by modulating surface properties

Although nanotechnology has been investigated during recent years to increase the bioavailability and therapeutic effects of mucosal administrated drugs, numerous barriers (e.g., pH environment, enzymes and mucus) still limit the delivery efficiency. And the epithelium would also affect the systemic mucosal drug delivery. Amongst all the barriers, the protective mucus has drawn more and more attention, which strongly hinders the accessibility of nanovehicles to epithelium. Therefore, trials to conquer the mucus barrier have been designed using two controversial strategies: mucoadhesion and mucus-penetration. This review summarizes the influence of mucus layer on nanomaterials and introduces the modification strategies by modulating surface properties (i.e., hydrophilicity/hydrophobicity and surface charge) to overcome mucus barriers. Furthermore, it also reviews advanced modification methods to meet the different surface requirements of nanovehicles to overcome mucus and epithelium barriers in systemic mucosal delivery.

Formulation and In Vitro Release Kinetics of Mucoadhesive Blend Gels Containing Matrine for Buccal Administration

Enterovirus 71 (EV71) is a pathogenic factor of severe hand, foot, and mouth disease (HFMD). No vaccine or specific treatment is currently available for EV71 infection. Hence, we developed a buccal mucoadhesive gel containing matrine to protect against HFMD. Mucoadhesive gels were prepared by Carbopol 974P and were combined with Carbopol 971P, sodium carboxymethyl cellulose (CMC-Na), or hydroxypropylmethy cellulose (HPMC K100M). The formulations were characterized in terms of tensile testing and continuous flow techniques for mucoadhesion. The rheological studies and in vitro drug release characteristics were also investigated. The results showed that combinations of two polymers significantly improved mucoadhesion, especially Carbopol 974P blended with HPMC. Carbopol 974P to HPMC blend ratios of 1:1 and 2:1 induced better mucoadhesion in the tensile test and continuous flow method, respectively. The most sustained release was obtained at a Carbopol 974P to HPMC ratio of 2.5:1. A predominantly non-Fickian diffusion release mechanism was obtained. The gel containing 2.5% Carbopol 974P combined with 1% HPMC showed good mucoadhesion properties and sustained drug release.

Nanoparticle-releasing nanofiber composites for enhanced in vivo vaginal retention

Current approaches for topical vaginal administration of nanoparticles result in poor retention and extensive leakage. To overcome these challenges, we developed a nanoparticle-releasing nanofiber delivery platform and evaluated its ability to improve nanoparticle retention in a murine model. We individually tailored two components of this drug delivery system for optimal interaction with mucus, designing (1) mucoadhesive fibers for better retention in the vaginal tract, and (2) PEGylated nanoparticles that diffuse quickly through mucus. We hypothesized that this novel dual-functioning (mucoadhesive/mucus-penetrating) composite material would provide enhanced retention of nanoparticles in the vaginal mucosa. Equivalent doses of fluorescent nanoparticles were vaginally administered to mice in either water (aqueous suspension) or fiber composites, and fluorescent content was quantified in cervicovaginal mucus and vaginal tissue at time points from 24 h to 7d. We also fabricated composite fibers containing etravirine-loaded nanoparticles and evaluated the pharmacokinetics over 7d. We found that our composite materials provided approximately 30-fold greater retention of nanoparticles in the reproductive tract at 24 h compared to aqueous suspensions. Compared to nanoparticles in aqueous suspension, the nanoparticles in fiber composites exhibited sustained and higher etravirine concentrations after 24 h and up to 7d, demonstrating the capabilities of this new delivery platform to sustain nanoparticle release out to 3d and drug retention out to one week after a single administration. This is the first report of nanoparticle-releasing fibers for vaginal drug delivery, as well as the first study of a single delivery system that combines two components uniquely engineered for complementary interactions with mucus.

Combining amino amide salts in mucoadhesive films enhances needle-free buccal anesthesia in adults

Needle-phobia is usually a great concern in dentistry, and the replacement of painful injections by patient-friendly needle-free topical formulations would bring several advantages in dental practice worldwide. In this pursuit, the effects of combining prilocaine hydrochloride (PCL) and lidocaine hydrochloride (LCL) in different proportions in mucoadhesive films on their in vitro permeation and retention through porcine esophageal mucosa was studied. Complementarily, the permeation and retention of isolated LCL was investigated. The in vitro model used for evaluating buccal anesthetic penetration and retention in buccal epithelium was validated. In addition, the feasibility of a novel in vivo model to evaluate the painful sensation due to puncture "needle-shaped" gum jaw of adults at shallow and deep levels was demonstrated. The in vivo clinical survey revealed the efficiency of the films, which had onset of anesthesia at 5min, peak of anesthetic effect within 15 and 25min and anesthesia duration of 50min after being placed in maxillary sites. The in vitro drug flux, permeability coefficient and retention in the epithelium significantly correlated with in vivo onset, peak and extent of shallow and deep anesthetic effect. At shallow level, the permeation of LCL has shown to be closely related to the onset of anesthesia, while the penetration of PCL has a significant impact in the peak of anesthetic effect. Concerning the deep level, the penetration of PCL is required to attain the onset of anesthetic effect. The total amount of drug retained in the epithelium showed to modulate the extent of both shallow and deep anesthesia. Thus, the combination of LCL and PCL in mucoadhesive films may offer dentists and their patients a safe improvement for pain management during dental procedures.

Development of Oromucosal Dosage Forms by Combining Electrospinning and Inkjet Printing

Printing technology has been shown to enable flexible fabrication of solid dosage forms for personalized drug therapy. Several methods can be applied for tailoring the properties of the printed pharmaceuticals. In this study, the use of electrospun fibrous substrates in the fabrication of inkjet-printed dosage forms was investigated. A single-drug formulation with lidocaine hydrochloride (LH) and a combination drug system containing LH and piroxicam (PRX) for oromucosal administration were prepared. The LH was deposited on the electrospun and cross-linked gelatin substrates by inkjet printing, whereas PRX was incorporated within the substrate fibers during electrospinning. The solid state analysis of the electrospun substrates showed that PRX was in an amorphous state within the fibers. Furthermore, the results indicated the entrapment and solidification of the dissolved LH within the fibrous gelatin matrix. The printed drug amount (2-3 mg) was in good correlation with the theoretical dose calculated based on the printing parameters. However, a noticeable degradation of the printed LH was detected after a few months. An immediate release (over 85% drug release after 8 min) of both drugs from the printed dosage forms was observed. In conclusion, the prepared electrospun gelatin scaffolds were shown to be suitable substrates for inkjet printing of oromucosal formulations. The combination of electrospinning and inkjet printing allowed the preparation of a dual drug system.

Development and characterization of a mucoadhesive sublingual formulation for pain control: extemporaneous oxycodone films in personalized therapy

OBJECTIVE

The aim of this work was the development of mucoadhesive sublingual films, prepared using a casting method, for the administration of oxycodone.

MATERIALS AND METHODS

A solvent casting method was employed to prepare the mucoadhesive films. A calibrated pipette was used to deposit single aliquots of different polymeric solutions on a polystyrene plate lid. Among the various tested polymers, hydroxypropylcellulose at low and medium molecular weight (HPC) and pectin at two different degrees of esterification (PC) were chosen for preparing solutions with good casting properties, capable of producing films suitable for mucosal application.

RESULTS AND DISCUSSION

The obtained films showed excellent drug content uniformity and stability and rapid drug release, which, at 8 min, ranged from 60% to 80%. All films presented satisfactory mucoadhesive and mechanical properties, also confirmed by a test on healthy volunteers, who did not experience irritation or mucosa damages. Pectin films based on pectin at lower degrees of esterification have been further evaluated to study the influence of two different amounts of drug on the physicochemical properties of the formulation. A slight reduction in elasticity has been observed in films containing a higher drug dose; nevertheless, the formulation maintained satisfactory flexibility and resistance to elongation.

CONCLUSIONS

HPC and PC sublingual films, obtained by a simple casting method, could be proposed to realize personalized hospital pharmacy preparations on a small scale.

Thiolated polymers as mucoadhesive drug delivery systems

Mucoadhesion is the process of binding a material to the mucosal layer of the body. Utilising both natural and synthetic polymers, mucoadhesive drug delivery is a method of controlled drug release which allows for intimate contact between the polymer and a target tissue. It has the potential to increase bioavailability, decrease potential side effects and offer protection to more sensitive drugs such as proteins and peptide based drugs. The thiolation of polymers has, in the last number of years, come to the fore of mucoadhesive drug delivery, markedly improving mucoadhesion due to the introduction of free thiol groups onto the polymer backbone while also offering a more cohesive polymeric matrix for the slower and more controlled release of drug. This review explores the concept of mucoadhesion and the recent advances in both the polymers and the methods of thiolation used in the synthesis of mucoadhesive drug delivery devices.

Magnetically Controlled Drug Release System through Magnetomechanical Actuation

A drug release system is developed capable to modulate the drug release kinetics by the application of a magnetic field. Thus, this work reports on the production, characterization, and release kinetics of a poly(l-lactic acid) (PLLA) microporous membrane containing a zeolite (Faujasite) and a magnetic stimuli-sensitive component, magnetostrictive Terfenol-D (TD), for the release of ibuprofen (IBU) as drug model. For membranes containing IBU-loaded zeolites and TD without an applied AC magnetic field, the release kinetics is characterized by a first order release. On the other hand, the application of an AC magnetic field modifies the release profile of the membrane, leading to an increase of the release rate by more than 30%, the magnetically driven release being characterized by a super case-II within the Korsmeyer-Peppas model, indicating a release mainly driven by a swelling or erosion mechanism, induced by the magnetostrictive particles under the applied magnetic field. The increase of the TD w/w from 10% to 20% has as a consequence a decrease in the quantity of IBU released from 79% to 70%; on the contrary, increasing the H _AC intensity from 100 to 200 mT promotes an increase on the percentage of IBU released from 67% to 75%.

Zolpidem Mucoadhesive Formulations for Intranasal Delivery: Characterization, In Vitro Permeability, Pharmacokinetics, and Nasal Ciliotoxicity in Rats

Zolpidem is a non-benzodiazepine hypnotic for the treatment of insomnia characterized by difficulties with sleep initiation. Our study aimed at developing a zolpidem mucoadhesive formulation with minimal local toxicity, prolonged nasal residence time, and enhanced absorption after intranasal delivery. In vitro permeability studies using artificial membrane and Calu-3 cell culture model indicated efficient permeability of zolpidem. Aqueous solubility of zolpidem was found to be significantly improved by hydroxypropyl-β-cyclodextrin. Various mucoadhesive formulations were then prepared comprising zolpidem, hydroxypropyl-β-cyclodextrin, and mucoadhesive polymers such as hydroxypropyl methylcellulose, sodium carboxymethylcellulose, and sodium alginate. Pharmacokinetic studies in rats demonstrated that intranasally administered zolpidem could achieve significantly faster absorption rate and higher plasma concentration than that from oral route. In comparison with solution formulation (ZLP-S03), the optimized mucoadhesive formulation (ZLP-B01) containing 0.25% hydroxypropyl methylcellulose was found to improve Cmax from 352.6 ± 86.0 to 555.7 ± 175.8 ng/mL, and AUC0-inf from 32,890 ± 7547 to 65,447 ± 36,996 ng·min/mL with mild nasal ciliotoxicity in rats.

Mucoadhesive therapeutic compositions: a patent review (2011-2014)

INTRODUCTION

With the introduction of mucoadhesion in 1980, pharmaceutical researchers have gained interest in mucoadhesive compositions. This interest has led to the development of mucoadhesive drug delivery systems aiming (I) to target a specific tissue, (II) to overcome barriers to absorption as well as (III) to control drug release of the therapeutic compositions.

AREAS COVERED

In this review, the term mucoadhesion and a variety of targetable mucosa are described through review of the literature. Mucoadhesive drug delivery systems and mucoadhesive polymers, such as thiomers, which are reported within the patent literature or in related publications are described in detail, including their therapeutic uses.

EXPERT OPINION

Mucoadhesion is associated with benefits such as controlled, sustained release, prolonged residence time at the site of action, the ability to target specific mucosae and ease of application which leads to higher rates of patient compliance. Although many research groups are investigating in this domain, not many drug delivery systems based on mucoadhesive polymers have got from bench to market. The most promising and advanced applications seen in patent literature within the last five years seems to be for oral application.

Multilayered Graphene Nano-Film for Controlled Protein Delivery by Desired Electro-Stimuli

Recent research has highlighted the potential use of "smart" films, such as graphene sheets, that would allow for the controlled release of a variety of therapeutic drugs. Taking full advantage of these versatile conducting sheets, we investigated the novel concept of applying graphene oxide (GO) and reduced graphene oxide (rGO) materials as both barrier and conducting layers that afford controlled entrapment and release of any molecules of interest. We fabricated multilayered nanofilm architectures using a hydrolytically degradable cationic poly(β-amino ester) (PAE), a model protein antigen, ovalbumin (OVA) as a building block along with the GO and rGO. We successfully showed that these multilayer films are capable of blocking the initial burst release of OVA, and they can be triggered to precisely control the release upon the application of electrochemical potential. This new drug delivery platform will find its usefulness in various transdermal drug delivery devices where on-demand control of drug release from the surface is necessary.