Microflora of processed cheese and the factors affecting it

Sterilized Processed Cheese: Principles, Technological Aspects, and Properties: A Review

Sterilized processed cheese is a dairy product with prolonged shelf life compared to regular processed cheese. The extension of durability is made possible by the thermosterilization of processed cheese, while regular processed cheese is submitted to pasteurization process during manufacturing. Sterilized processed cheese can be classified as long-life foods and their shelf life may reach up to 24 months, if stored at ambient temperature (approx. 25 ± 1 °C). This fact is an advantage over regular processed cheese, which has a shelf life of only around 6 months. Sterilized processed cheese finds application in everyday life when refrigeration facilities are not available; i.e., it is intended for regular retail. However, their most important use is for storage in state material reserves and, moreover, for catering for members of the armed forces and/or members of the integrated rescue system. This review aimed to gather general information on sterilized processed cheeses, their characterization, usage and production. Furthermore, the review discusses the principles of sterilization and factors affecting the course of sterilization focusing on the setting the sterilization limits and sterilization parameters in order to maximize end-product quality. Moreover, last part of the review is devoted to the effect of sterilization and long-term storage on the qualitative parameters of sterilized processed cheese.

Humidity-Responsive Amorphous Calcium-Magnesium Pyrophosphate/Cassava Starch Scaffold for Enhanced Neurovascular Bone Regeneration

Developing a neurovascular bone repair scaffold with an appropriate mechanical strength remains a challenge. Calcium phosphate (CaP) is similar to human bone, but its scaffolds are inherently brittle and inactive, which require recombination with active ions and polymers for bioactivity and suitable strength. This work discussed the synthesis of amorphous magnesium-calcium pyrophosphate (AMCP) and the subsequent development of a humidity-responsive AMCP/cassava starch (CS) scaffold. The scaffold demonstrated enhanced mechanical properties by strengthening the intermolecular hydrogen bonds and ionic bonds between AMCP and CS during the gelatinization and freeze-thawing processes. The release of active ions was rapid initially and stabilized into a long-term stable release after 3 days, which is well-matched with new bone growth. The release of pyrophosphate ions endowed the scaffold with antibacterial properties. At the cellular level, the released active ions simultaneously promoted the proliferation and mineralization of osteoblasts, the proliferation and migration of endothelial cells, and the proliferation of Schwann cells. At the animal level, the scaffold was demonstrated to promote vascular growth and peripheral nerve regeneration in a rat skull defect experiment, ultimately resulting in the significant and rapid repair of bone defects. The construction of the AMCP/CS scaffold offers practical suggestions and references for neurovascular bone repair.

Evaluation of processed cheese viscoelastic properties during sterilization observed in situ

Sterilized processed cheese is a specific dairy product with a prolonged shelf life intended for regular retail offer but also as food provisions for armies during peacetime, as well as during crisis and emergency situations, and for storage in state material reserves. Storage requirements are usually defined as ≤25°C for at least 24 mo. One of the ways to achieve such a shelf life is sterilization. Therefore, the aim of the work was to describe, for the first time in the available scientific literature, in situ changes in the viscoelastic properties of spreadable melt (34% wt/wt DM content, 45% wt/wt fat in DM content, and 14% wt/wt protein content) during an increase in temperature (target temperature 122°C), holding at sterilization temperature (20 min) and subsequent cooling (to ~30°C). While increasing to the target sterilization temperature, a significant decrease occurred in the storage and loss moduli values. Both moduli started to increase again during the target sterilization temperature period and during the whole cooling phase. The values of the storage and loss moduli were significantly higher at the end of the cooling of the sterilized product, and conversely, the phase angle value was lower compared with the melt before sterilization. As a result of sterilization, an increase occurred in the levels of markers of the Maillard reaction complex and lipid oxidation processes. The value of hardness, corrected stress, and elongational viscosity also increased compared with nonsterilized products. As a result of sterilization, the flavor worsened and sterilized processed cheeses showed darker (brownish) color. However, even after sterilization, the products were evaluated as acceptable for consumers and maintained their spreadability.

Influence of Emulsifying Salts on the Growth of Bacillus thuringiensis CFBP 3476 and Clostridium perfringens ATCC 13124 in Processed Cheese

Processed cheese is a dairy product with multiple end-use applications, where emulsifying salts play a fundamental role in physicochemical changes during production. Moreover, some of these salts may be a strategy to control spoilage and pathogenic microorganisms, contributing to safety and shelf life extension. This study aimed to evaluate the in vitro inhibitory activity of two emulsifying salts (ESSP = short polyP and BSLP = long polyP) against Bacillus thuringiensis CFBP 3476 and Clostridium perfringens ATCC 13124, and to compare the in situ effects of two emulsifying salts treatments (T1 = 1.5% ESSP and T2 = 1.0% ESSP + 0.5% BSLP) in processed cheeses obtained by two different methods (laboratory- and pilot-scales), during 45-day storage at 6 °C. C. perfringens ATCC 13124 growth was not affected in vitro or in situ (p > 0.05), but both of the treatments reduced B. thuringiensis CFBP 4376 counts in the tested condition. Counts of the treatments with B. thuringiensis CFBP 3476 presented a higher and faster reduction in cheeses produced by the laboratory-scale method (1.6 log cfu/g) when compared to the pilot-scale method (1.8 log cfu/g) (p < 0.05). For the first time, the inhibitory effect of emulsifying salts in processed cheeses obtained by two different methods was confirmed, and changes promoted by laboratory-scale equipment influenced important interactions between the processed cheese matrix and emulsifying salts, resulting in B. thuringiensis CFBP 4376 growth reduction.

The effect of homogenization and addition of polysaccharides on the viscoelastic properties of processed cheese sauce

This study was conducted to determine the effect of 1-stage homogenization (OSH) and 2-stage homogenization (TSH) and the addition of polysaccharides [κ-carrageenan (CR) or furcellaran (FR) at levels ranging from 0.000 to 1.000% (wt/wt)] on the physicochemical, viscoelastic, and mechanical vibration damping properties of processed cheese sauces (PCS) after 30 d of storage (6 ± 2°C). The basic chemical properties (pH, dry matter content) were similar for all tested samples. Viscoelastic measurements indicated that PCS rigidity was directly proportional to increasing CR or FR concentration and to the application of homogenization. The interactions between the application of homogenization and the concentration of polysaccharides used were also significant. Compared with OSH, TSH did not lead to any further increase in the rigidity. The preceding results were also supported by data obtained from a nondestructive method of mechanical vibration damping. No changes in water activity were observed in any PCS sample. Overall, the addition of FR or CR appeared to be highly suitable for increasing the emulsion stability of PCS. If PCS products with softer consistency are desired, then a concentration of CR/FR ≤0.250% (wt/wt) could be recommended together with OSH/TSH. For products for which a firmer PCS consistency is required, the addition of CR in concentrations of ≥0.500% (wt/wt) or FR in concentrations of ≥1.000% (wt/wt) together with OSH is recommended. Finally, as the concentration of polysaccharides increased, a darker PCS color was observed.

Diversity of microorganisms in the traditional Slovak cheese

The aim of the present study was to describe the microbial groups of the traditional Slovak cheese Parenica during rippening. The microbial group included the total bacterial count, coliform bacteria, enterococci, lactic acid bacteria, and microscopic filamentous fungi, which may affect the organoleptic characteristics of this product. A total of 42 cheese samples were collected from four different farms during three months. The total bacterial counts were cultivated on Plate count agar at 30 °C, lactic acid bacteria (LAB) on MRS, APT and MSE at 37 °C, coliform bacteria on VRBL at 37 °C. Gram-positive and Gram-negative isolates were identified by MALDI-TOF MS profiling. Bacillus sp. and Enterococcus faecium were the most frequently identified species of bacteria. Candida kefyr was the most distributed yeast according to microbiological methods. Lactic acid bacteria group was represented by Lactobacillus helveticus, L. jensenii, L. alimentarius, L. crispatus, L. curvatus, L. fermentum, L. suebicus, L. delbrueckii ssp. lactis, L. paracasei ssp. paracasei, Lactococcus lactis ssp. lactis, Leuconostoc lactis and Le. mesenteroides ssp. mesenteroides . This report describing the indigenous microbiota of the traditional raw milk cheeses from Slovakia. Our results provide useful information on occurrence of valuable microbial strain for the industrialization of producing of the traditional dairy products in Slovakia.

Metagenomics of pasteurized and unpasteurized gouda cheese using targeted 16S rDNA sequencing

BACKGROUND

The microbiome of cheese is diverse, even within a variety. The metagenomics of cheese is dependent on a vast array of biotic and abiotic factors. Biotic factors include the population of microbiota and their resulting cellular metabolism. Abiotic factors, including the pH, water activity, fat, salt, and moisture content of the cheese matrix, as well as environmental conditions (temperature, humidity, and location of aging), influence the biotic factors. This study assessed the metagenomics of commercial Gouda cheese prepared using pasteurized or unpasteurized cow milk or pasteurized goat milk via 16S rDNA sequencing.

RESULTS

Results were analyzed and compared based on milk pasteurization and source, spatial variability (core, outer, and under the rind), and length of aging (2-4 up to 12-18 months). The dominant organisms in the Gouda cheeses, based on percentage of sequence reads identified at the family or genus levels, were Bacillaceae, Lactococcus, Lactobacillus, Streptococcus, and Staphylococcus. More genus- or family-level (e.g. Bacillaceae) identifications were observed in the Gouda cheeses prepared with unpasteurized cow milk (120) compared with those prepared with pasteurized cow milk (92). When assessing influence of spatial variability on the metagenomics of the cheese, more pronounced differences in bacterial genera were observed in the samples taken under the rind; Brachybacterium, Pseudoalteromonas, Yersinia, Klebsiella, and Weissella were only detected in these samples. Lastly, the aging length of the cheese greatly influenced the number of organisms observed. Twenty-seven additional genus-level identifications were observed in Gouda cheese aged for 12-18 months compared with cheese only aged 2-4 months.

CONCLUSIONS

Collectively, the results of this study are important in determining the typical microbiota associated with Gouda cheese and how the microbiome plays a role in safety and quality.

Citrofulvicin, an Antiosteoporotic Polyketide from Penicillium velutinum

Citrofulvicin (1), along with its early shunt product fulvionol (2), was characterized as a skeletally unprecedented antiosteoporotic agent from a human sputum-derived fungus Penicillium velutinum. The unique citrofulvicin framework is likely formed by a nonenzymatic intermolecular Diels-Alder cycloaddition between heptaketide-based intermediates. Citrofulvicin and fulvionol were demonstrated to be osteogenic at 0.1 μM in the prednisolone-induced osteoporotic zebrafish.

Physicochemical, microbiological and spoilage analysis of probiotic processed cheese analogues with reduced emulsifying salts during refrigerated storage

Microbial quality of low-salt processed cheeses supplemented with Bacillus coagulans spores (10(7)-10(8) CFU/g) relying on their physicochemical characteristics during 60 day-cold storage was evaluated. A reduction in moisture content, water activity and pH value and a significant enhancement in proteolytic index of control and probiotic samples were obtained by prolonging storage time. Survival rate of the probiotic cells significantly decreased up to day 30, while total count of the viable cells increased by increasing storage time. A 20 and 67 % increase in total counts of coliforms and mold-yeast of the control sample were respectively observed after 60 days of cold storage. A considerable decrease in the total counts of coliforms and mold-yeast was also found in the processed cheeses containing probiotic supplement. According to the macroscopic and sensory assessment, off-odors and off-flavors in the control sample were diagnosed after day 1 of cold-storage. Noticeably, the resistance to spoilage was more prominent in samples containing the probiotic cells.