Effect of nanoparticles on digitoxin uptake and pharmacologic activity in rat glomerular mesangial cell cultures

One-pot polyglycidol nanogels via liposome master templates for dual drug delivery

Polyglycidol-based nanohydrogels (nHGs) have been prepared by optimizing the use of liposome master templates resulting in a high-yielding and more practical one-pot process to provide materials capable of carrying drugs of adverse chemical nature. The nanogels prepared with the one-pot method showed favorable kinetics for the release of either Nile Red (NR) or lysozyme (LYS), loaded with gel precursors such as semi-branched poly(glycidol allylglycidyl ether), PEG dithiol (1KDa), a free radical initiator and liposomal lipids at the liposome formation step. This process is superior to a comparable step-wise traditional approach and circumvents loading of the gel precursors with the hydrophilic drug into preformed liposome templates. A thiol-ene crosslinking reaction accomplishes the formation of the nanonetwork resulting in nHGs prepared in the traditional step-wise (nHG-SW) approach and the one-pot (nHG-OP) process. Both nanogel networks were characterized in terms of particle size and zeta (ζ) potential with average values of 148nm±39nm and -25.9mV±9.2 for the nHG-SW and 132nm±32 and -23.1mV±9.7 for the nHG-OPs. Loading efficiency for both of the nanogels with NR was determined by spectrophotometry to be 28% (nHP-SW) and 31% (nHP-OP). The LYS loading was based on the target loading of 10μg/mg for both nanogels found to be 84% and 86% for the nHG-SW and nHP-OP, respectively. As proof of concept for combination drug delivery, the in vitro release of both drug mimics, NR and LYS, were monitored under physiologically relevant conditions by an optimized dialysis method. The implementation of the multi-functional and semi-branched polyglycidol is recognized as the main contributor for the observed highly controlled release of proteins that are otherwise rapidly released from common PEG-based nanogel networks. Furthermore, the one-pot process led to be the most favorable drug delivery system based on the release kinetics pointing to a denser polymer network.

In vitro effects of nanoparticles on renal cells

Background

The ability of nanoparticles to cross the lung-blood barrier suggests that they may translocate to blood and to targets distant from their portal of entry. Nevertheless, nanotoxicity in organs has received little attention. The purpose of this study was to evaluate nanotoxicity in renal cells using in vitro models. Various carbon black (CB) (FW2–13 nm, Printex60-21 nm and LB101-95 nm) and titanium dioxide (TiO₂-15 and TiO₂-50 nm) nanoparticles were characterized on size by electron microscopy. We evaluated theirs effects on glomerular mesangial (IP15) and epithelial proximal tubular (LLC-PK₁) renal cells, using light microscopy, WST-1 assay, immunofluorescence labeling and DCFH-DA for reactive oxygen species (ROS) assay.

Results

Nanoparticles induced a variety of cell responses. On both IP15 and LLC-PK₁ cells, the smallest FW2 NP was found to be the most cytotoxic with classic dose-behavior. For the other NPs tested, different cytotoxic profiles were found, with LLC-PK₁ cells being more sensitive than IP15 cells. Exposure to FW2 NPs, evidenced in our experiments as the most cytotoxic particle type, significantly enhanced production of ROS in both IP15 and LLC-PK₁ cells. Immunofluorescence microscopy using latex beads indicated that depending on their size, the cells internalized particles, which accumulated in the cell cytoplasm. Additionally using transmission electronic microscope micrographs show nanoparticles inside the cells and trapped in vesicles.

Conclusion

The present data constitute the first step towards determining in vitro dose effect of manufactured CB and TiO₂ NPs in renal cells. Cytotoxicological assays using epithelial tubular and glomerular mesangial cell lines rapidly provide information and demonstrated that NP materials exhibit varying degrees of cytotoxicity. It seems clear that in vitro cellular systems will need to be further developed, standardized and validated (relative to in vivo effects) in order to provide useful screening data about the relative toxicity of nanoparticles.

Air pollution and atherothrombosis

Observational studies have consistently demonstrated an association between exposure to air pollution and increased cardiovascular morbidity and mortality. This association is strongest for particulate matter (PM), of which combustion-derived particulate is an important component. Studies assessing the effects of PM exposure in vitro and in vivo have provided insight into the biological mechanisms underlying these observations. In this review we discuss the potential for inhaled particles to impact on the development and progression of atherosclerosis. Oxidative stress and inflammation are central to both the toxicology of PM and the pathogenesis of atherosclerosis. It is possible that nanoparticulates or soluble components of PM may translocate into the bloodstream, resulting in direct effects on atherosclerotic plaque stability, the vascular endothelium, platelet function, and thrombosis. We summarize the latest experimental research and relate this to current understanding of the role of inflammation and vascular dysfunction in the pathogenesis of atherothrombosis. Ongoing research in this area will continue to provide insight into the adverse vascular effects of PM, with the possibility of therapeutic interventions to reduce the impact of environmental air pollution on cardiovascular disease a realistic goal.

The potential risks of nanomaterials: a review carried out for ECETOC

During the last few years, research on toxicologically relevant properties of engineered nanoparticles has increased tremendously. A number of international research projects and additional activities are ongoing in the EU and the US, nourishing the expectation that more relevant technical and toxicological data will be published. Their widespread use allows for potential exposure to engineered nanoparticles during the whole lifecycle of a variety of products. When looking at possible exposure routes for manufactured Nanoparticles, inhalation, dermal and oral exposure are the most obvious, depending on the type of product in which Nanoparticles are used. This review shows that (1) Nanoparticles can deposit in the respiratory tract after inhalation. For a number of nanoparticles, oxidative stress-related inflammatory reactions have been observed. Tumour-related effects have only been observed in rats, and might be related to overload conditions. There are also a few reports that indicate uptake of nanoparticles in the brain via the olfactory epithelium. Nanoparticle translocation into the systemic circulation may occur after inhalation but conflicting evidence is present on the extent of translocation. These findings urge the need for additional studies to further elucidate these findings and to characterize the physiological impact. (2) There is currently little evidence from skin penetration studies that dermal applications of metal oxide nanoparticles used in sunscreens lead to systemic exposure. However, the question has been raised whether the usual testing with healthy, intact skin will be sufficient. (3) Uptake of nanoparticles in the gastrointestinal tract after oral uptake is a known phenomenon, of which use is intentionally made in the design of food and pharmacological components. Finally, this review indicates that only few specific nanoparticles have been investigated in a limited number of test systems and extrapolation of this data to other materials is not possible. Air pollution studies have generated indirect evidence for the role of combustion derived nanoparticles (CDNP) in driving adverse health effects in susceptible groups. Experimental studies with some bulk nanoparticles (carbon black, titanium dioxide, iron oxides) that have been used for decades suggest various adverse effects. However, engineered nanomaterials with new chemical and physical properties are being produced constantly and the toxicity of these is unknown. Therefore, despite the existing database on nanoparticles, no blanket statements about human toxicity can be given at this time. In addition, limited ecotoxicological data for nanomaterials precludes a systematic assessment of the impact of Nanoparticles on ecosystems.

Preparation of nanoparticles composed of chitosan/poly-gamma-glutamic acid and evaluation of their permeability through Caco-2 cells

In this study, a novel nanoparticle system for paracellular transport was prepared using a simple and mild ionic-gelation method upon addition of a poly-gamma-glutamic acid (gamma-PGA) solution into a low-molecular-weight chitosan (low-MW CS) solution. The particle size and the zeta potential value of the prepared nanoparticles can be controlled by their constituted compositions. The results obtained by the TEM and AFM examinations showed that the morphology of the prepared nanoparticles was spherical in shape. Evaluation of the prepared nanoparticles in enhancing intestinal paracellular transport was investigated in vitro in Caco-2 cell monolayers. It was found that the nanoparticles with CS dominated on the surfaces could effectively reduce the transepithelial electrical resistance (TEER) of Caco-2 cell monolayers. After removal of the incubated nanoparticles, a gradual increase in TEER was noticed. The confocal laser scanning microscopy observations confirmed that the nanoparticles with CS dominated on the surface were able to open the tight junctions between Caco-2 cells and allowed transport of the nanoparticles via the paracellular pathways.

Glial cell line-derived neurotrophic factor-conjugated nanoparticles suppress acquisition of cocaine self-administration in rats

The neurotrophic factor glial cell line-derived neurotrophic factor (GDNF) may have therapeutic potential for preventing and treating cocaine addiction. Previously, we found that transplantation of a GDNF-expressing astrocyte cell line into the striatum and nucleus accumbens attenuates cocaine-seeking behavior in Sprague-Dawley rats. However, as a potential treatment for humans, cell transplantation presents several technical and ethical complications. Nanoparticulate systems are a safe and effective method for introducing exogenous compounds into the brain. Therefore, we examined the effect of GDNF-conjugated nanoparticles microinjected into the striatum and nucleus accumbens on cocaine self-administration in rats. GDNF-conjugated nanoparticles blocked the acquisition of cocaine self-administration compared to control treatments. Furthermore, a cocaine dose response demonstrated that decreased lever response in rats that received GDNF-conjugated nanoparticles persisted after substitution with different cocaine doses. This effect is not due to a non-specific disruption of locomotor or operant behavior, as seen following a water operant task. The current study is one of the first demonstrations that drug-conjugated nanoparticles may be effective in treating brain disorders. These findings suggest that GDNF-conjugated nanoparticles may serve as a novel potential treatment for drug addiction.

Chemotherapeutic efficacy of poly (DL-lactide-co-glycolide) nanoparticle encapsulated antitubercular drugs at sub-therapeutic dose against experimental tuberculosis

The present study was designed to evaluate the chemotherapeutic efficacy of poly (DL-lactide-co-glycolide) (PLG) nanoparticles (NP) encapsulating three front-line antitubercular drugs (ATDs: rifampicin, RIF; isoniazid, INH and pyrazinamide, PZA) at 2/3rd therapeutic dose. PLG nanoparticles prepared by the double emulsion and solvent evaporation technique were administered orally at 2/3rd therapeutic dose to guinea pigs. A single oral administration of the formulation resulted in sustained drug levels in the plasma for 7-12 days and in the organs for 11-14 days with a significant improvement in mean residence time as well as drug bioavailability. The administration of PLG nanoparticles every 10 days (five doses) to Mycobacterium tuberculosis H(37)Rv infected guinea pigs led to undetectable bacilli in the organs, as did 46 conventional doses. Therefore, nanoparticle based antitubercular chemotherapy forms a sound basis for a reduction in dosing frequency and also offers the possibility of reducing the drug dosage.

Poly-epsilon-caprolactone microspheres and nanospheres: an overview

Poly-epsilon-caprolactone (PCL) is a biodegradable, biocompatible and semicrystalline polymer having a very low glass transition temperature. Due to its slow degradation, PCL is ideally suitable for long-term delivery extending over a period of more than one year. This has led to its application in the preparation of different delivery systems in the form of microspheres, nanospheres and implants. Various categories of drugs have been encapsulated in PCL for targeted drug delivery and for controlled drug release. Microspheres of PCL either alone or of PCL copolymers have been prepared to obtain the drug release characteristics. This article reviews the advancements made in PCL-based microspheres and nanospheres with special reference to the method of preparation of these and their suitability in developing effective delivery systems.

New lipid nanocapsules exhibit sustained release properties for amiodarone

Amiodarone is widely used in heart diseases but also provokes severe adverse effects due to its accumulation in other tissues than the heart. In order to circumvent side effects colloidal drug carriers have been designed to deliver the drug specifically to the site of action. Many preparation methods have been described and most have been reported to involve a high initial drug loss when introduced in an aqueous environment. Lipid nanocapsules (LNC) were prepared by a new phase inversion procedure and characterized in terms of size, surface potential, encapsulation efficiency, and drug release pattern. The encapsulation rate was varying between 92 and 94%. LNC did not display a distinct initial burst effect while the drug release of amiodarone can be prolonged over a significant period. Acceptor phase interfaces such as liposomes or blank LNC were applied to the release medium to enable a drug release to larger extents. The release was triggered by the pH of the release medium showing a faster release for lower pH; t(50%) values vary from 25.6 h (pH 2) to 236.3 h (pH 7.4). Moreover, LNC were prepared of different sizes (24.7+/-2.0 to 102.5+/-0.9 nm) showing only slight influences on their drug release profiles. It was concluded that the LNC surface is able to retain amphiphilic drugs. Such properties could allow drug delivery to the site of action without high initial drug loss.

Synthesis and characterization of chitosan-poly(acrylic acid) nanoparticles

Chitosan (CS)-poly(acrylic acid) (PAA) complex nanoparticles, which are well dispersed and stable in aqueous solution, have been prepared by template polymerization of acrylic acid (AA) in chitosan solution. The physicochemical properties of nanoparticles were investigated by using size exclusion chromatography, FT-IR, dynamic light scattering, transmission electron microscope and zeta potential. It was found that the molecular weight of PAA in nanoparticles increased with the increase of molecular weight of CS, indicating that the polymerization of acrylic acid in the chitosan solution was a template polymerization. It was also found that the prepared nanoparticles carried a positive charge and showed the size in the range from 50 to 400 nm. The surface structure and zeta potential of nanoparticles can be controlled by different preparation processes. The experiment of in vitro silk peptide (SP) release showed that these nanoparticles provided a continuous release of the entrapped SP for 10 days, and the release behavior was influenced by the pH value of the medium.