Homology modelling of two subtilisin-like proteases from the hyperthermophilic archaea Pyrococcus furiosus and Thermococcus stetteri

Maturation process and characterization of a novel thermostable and halotolerant subtilisin-like protease with high collagenolytic but low gelatinolytic activity

Enzymatic degradation of collagen is of great industrial and environmental significance; however, little is known about thermophile-derived collagenolytic proteases. Here, we report a novel collagenolytic protease (TSS) from thermophilic Brevibacillus sp. WF146. The TSS precursor comprises a signal peptide, an N-terminal propeptide, a subtilisin-like catalytic domain, a β-jelly roll (βJR) domain, and a prepeptidase C-terminal (PPC) domain. The maturation of TSS involves a stepwise autoprocessing of the N-terminal propeptide and the PPC domain, and the βJR rather than the PPC domain is necessary for correct folding of the enzyme. Purified mature TSS displayed optimal activity at 70°C and pH 9.0, a half-life of 1.5 h at 75°C, and an increased thermostability with rising salinity up to 4 M. TSS possesses an increased number of surface acidic residues and ion pairs, as well as four Ca 2+ -binding sites, which contribute to its high thermostability and halotolerance. At high temperatures, TSS exhibited high activity toward insoluble type I collagen and azocoll, but showed a low gelatinolytic activity, with a strong preference for Arg and Gly at the P1 and P1’ positions, respectively. Both the βJR and PPC domains could bind but not swell collagen, and thus facilitate TSS-mediated collagenolysis via improving the accessibility of the enzyme to the substrate. Additionally, TSS has the ability to efficiently degrade fish scale collagen at high temperatures.

IMPORTANCE

Proteolytic degradation of collagen at high temperatures has the advantages of increasing degradation efficiency and minimizing the risk of microbial contamination. Reports on thermostable collagenolytic proteases are limited, and their maturation and catalytic mechanisms remain to be elucidated. Our results demonstrate that the thermophile-derived TSS matures in an autocatalytic manner, and represents one of the most thermostable collagenolytic proteases reported so far. At elevated temperatures, TSS prefers hydrolyzing insoluble heat-denatured collagen rather than gelatin, providing new insight into the mechanism of collagen degradation by thermostable collagenolytic proteases. Moreover, TSS has the potential to be used in recycling collagen-rich wastes such as fish scales.

Extracellular Production, Characterization, and Engineering of a Polyextremotolerant Subtilisin-Like Protease From Feather-Degrading Thermoactinomyces vulgaris Strain CDF

Here, the gene encoding a subtilisin-like protease (protease Als) was cloned from Thermoactinomyces vulgaris strain CDF and expressed in Escherichia coli. The recombinant enzyme was released into the culture medium of E. coli as a mature form (mAls). Purified mAls displayed optimal activity at 60–70°C and pH 10.0 using azo-casein as the substrate, and showed a half-life of 13.8 h at 70°C. Moreover, the activity of thermostable mAls was comparable to or higher than those of mesophilic subtilisin Carlsberg and proteinase K at low temperatures (10–30°C). Protease Als was also stable in several organic solvents and showed high compatibility with commercial laundry detergents. Notably, mAls exhibited approximately 100% of its activity at 3 M NaCl, and showed enhanced thermostability with the increase of NaCl concentration up to 3 M. Protease Als possesses an excess of solvent-accessible acidic amino acid residues, which may account for the high halotolerance of the enzyme. Compared with homologous protease C2 from the same strain, protease Als exhibits substantially lower activity toward insoluble keratin substrates but efficiently hydrolyzes soluble keratin released from chicken feathers. Additionally, direct substitution of the substrate-binding site of protease Als with that of protease C2 improves its activity against insoluble keratin substrates. By virtue of its polyextremotolerant attribute and kerationolytic capacity, protease Als may find broad applications in various industries such as laundry detergents, food processing, non-aqueous biocatalysis, and feather processing.

Principles for enhancing virus capsid capacity and stability from a thermophilic virus capsid structure

The capsids of double-stranded DNA viruses protect the viral genome from the harsh extracellular environment, while maintaining stability against the high internal pressure of packaged DNA. To elucidate how capsids maintain stability in an extreme environment, we use cryoelectron microscopy to determine the capsid structure of thermostable phage P74-26 to 2.8-Å resolution. We find P74-26 capsids exhibit an overall architecture very similar to those of other tailed bacteriophages, allowing us to directly compare structures to derive the structural basis for enhanced stability. Our structure reveals lasso-like interactions that appear to function like catch bonds. This architecture allows the capsid to expand during genome packaging, yet maintain structural stability. The P74-26 capsid has T = 7 geometry despite being twice as large as mesophilic homologs. Capsid capacity is increased with a larger, flatter major capsid protein. Given these results, we predict decreased icosahedral complexity (i.e. T ≤ 7) leads to a more stable capsid assembly.

Viral capsids need to protect the genome against harsh environmental conditions and cope with high internal pressure from the packaged genome. Here, the authors determine the structure of the thermostable phage P74-26 capsid at 2.8-Å resolution and identify features underlying enhanced capsid capacity and structural stability.

Calcium ion induced thermodynamic stability, bisubstrate specificity, and differential organic solvent tolerance of a predominantly β-sheet serine protease from Bacillus aquimaris VITP4

The present study was aimed to get insights on the role of calcium ions on the thermodynamic stability, substrate specificity, and organic solvent compatibility of the extracellular protease produced by Bacillus aquimaris VITP4. Presence of Ca²⁺ enhanced the activity of the enzyme in the temperature range of 30-60 °C and increased the half-life from 164 to 234 Min. Circular dichroism experiments indicated that the temperature of half-denaturation (T_m ) of the protease increased from 76 to 86 °C. As judged by fluorescence emission profiles, the overall fold of the enzyme around the tryptophan residues could be similar. Further, thermal inactivation experiments revealed that the enzyme followed first order kinetics, with increase in energy for inactivation (E_ai ) by 24.2 ± 1.2 kJ mol ^-1 in the presence of Ca²⁺ . Studies with synthetic peptides as well as with bovine serum albumin signified preferential hydrolysis of the peptide bonds at the C-terminus of alanine residues (with a k_cat /K_M of 141,400 M^-1  Sec^-1 ) and at the C-terminus of arginine residues with a lower specificity (72,400 M^-1  Sec^-1 ), indicating bisubstrate specificity of the enzyme. The enzyme was found to be compatible with organic solvents (50%, v/v) such as acetonitrile and butanol, indicating possible application under demanding nonaqueous conditions.

Four Inserts within the Catalytic Domain Confer Extra Stability and Activity to Hyperthermostable Pyrolysin from Pyrococcus furiosus

Pyrolysin from the hyperthermophilic archaeon Pyrococcus furiosus is the prototype of the pyrolysin family of the subtilisin-like serine protease superfamily (subtilases). It contains four inserts (IS147, IS29, IS27, and IS8) of unknown function in the catalytic domain. We performed domain deletions and showed that three inserts are either essential (IS147 and IS27) or important (IS8) for efficient maturation of pyrolysin at high temperatures, whereas IS29 is dispensable. The large insert IS147 contains Ca3 and Ca4, two calcium-binding Dx[DN]xDG motifs that are conserved in many pyrolysin-like proteases. Mutagenesis revealed that the Ca3 site contributes to enzyme thermostability and the Ca4 site is necessary for pyrolysin to fold into a maturation-competent conformation. Mature insert-deletion variants were characterized and showed that IS29 and IS8 contribute to enzyme activity and stability, respectively. In the presence of NaCl, pyrolysin undergoes autocleavage at two sites: one within IS29 and the other in IS27 Disrupting the ion pairs in IS27 and IS8 induces autocleavage in the absence of salts. Interestingly, autocleavage products combine noncovalently to form an active, nicked enzyme that is resistant to SDS and urea denaturation. Additionally, a single mutation in IS29 increases resistance to salt-induced autocleavage and further increases enzyme thermostability. Our results suggest that these extra structural elements play a crucial role in adapting pyrolysin to hyperthermal environments.IMPORTANCE Pyrolysin-like proteases belong to the subtilase superfamily and are characterized by large inserts and long C-terminal extensions; however, the role of the inserts in enzyme function is unclear. Our results demonstrate that four inserts in the catalytic domain of hyperthermostable pyrolysin contribute to the folding, maturation, stability, and activity of the enzyme at high temperatures. The modification of extra structural elements in pyrolysin-like proteases is a promising strategy for modulating global structure stability and enzymatic activity of this class of protease.

Analysis of Comparative Sequence and Genomic Data to Verify Phylogenetic Relationship and Explore a New Subfamily of Bacterial Lipases

Thermostable and organic solvent-tolerant enzymes have significant potential in a wide range of synthetic reactions in industry due to their inherent stability at high temperatures and their ability to endure harsh organic solvents. In this study, a novel gene encoding a true lipase was isolated by construction of a genomic DNA library of thermophilic Aneurinibacillus thermoaerophilus strain HZ into Escherichia coli plasmid vector. Sequence analysis revealed that HZ lipase had 62% identity to putative lipase from Bacillus pseudomycoides. The closely characterized lipases to the HZ lipase gene are from thermostable Bacillus and Geobacillus lipases belonging to the subfamily I.5 with ≤ 57% identity. The amino acid sequence analysis of HZ lipase determined a conserved pentapeptide containing the active serine, GHSMG and a Ca²⁺-binding motif, GCYGSD in the enzyme. Protein structure modeling showed that HZ lipase consisted of an α/β hydrolase fold and a lid domain. Protein sequence alignment, conserved regions analysis, clustal distance matrix and amino acid composition illustrated differences between HZ lipase and other thermostable lipases. Phylogenetic analysis revealed that this lipase represented a new subfamily of family I of bacterial true lipases, classified as family I.9. The HZ lipase was expressed under promoter P_lac using IPTG and was characterized. The recombinant enzyme showed optimal activity at 65°C and retained ≥ 97% activity after incubation at 50°C for 1h. The HZ lipase was stable in various polar and non-polar organic solvents.

Effects of metal ions on stability and activity of hyperthermophilic pyrolysin and further stabilization of this enzyme by modification of a Ca2+-binding site

Pyrolysin is an extracellular subtilase produced by the marine hyperthermophilic archaeon Pyrococcus furiosus. This enzyme functions at high temperatures in seawater, but little is known about the effects of metal ions on the properties of pyrolysin. Here, we report that the supplementation of Na(+), Ca(2+), or Mg(2+) salts at concentrations similar to those in seawater destabilizes recombinant pyrolysin but leads to an increase in enzyme activity. The destabilizing effect of metal ions on pyrolysin appears to be related to the disturbance of surface electrostatic interactions of the enzyme. In addition, mutational analysis of two predicted high-affinity Ca(2+)-binding sites (Ca1 and Ca2) revealed that the binding of Ca(2+) is important for the stabilization of this enzyme. Interestingly, Asn substitutions at residues Asp818 and Asp820 of the Ca2 site, which is located in the C-terminal extension of pyrolysin, resulted in improvements in both enzyme thermostability and activity without affecting Ca(2+)-binding affinity. These effects were most likely due to the elimination of unfavorable electrostatic repulsion at the Ca2 site. Together, these results suggest that metal ions play important roles in modulating the stability and activity of pyrolysin.

Purification, characterization and identification of a senescence related serine protease in dark-induced senescent wheat leaves

Senescence-related proteases play important roles in leaf senescence by regulating protein degradation and nutrient recycling. A 98.9kDa senescence-related protease EP3 in wheat leaves was purified by ammonium sulfate precipitation, Q-Sepharose fast flow anion exchange chromatography and gel slicing after gel electrophoresis. Due to its relatively high thermal stability, its protease activity did not decrease after incubation at 40°C for 1-h. EP3 protease was suggested to be a metal-dependent serine protease, because its activity was inhibited by serine protease inhibitors PMSF and AEBSF and metal related protease inhibitor EGTA. It was identified as a subtilisin-like serine protease of the S8A family based on data from both mass spectrometry and the cloned cDNA sequence. Therefore, these data suggest that a serine protease of the S8A subfamily with specific biochemical properties is involved in senescence-associated protein degradation.

Proteolysin, a novel highly thermostable and cosolvent-compatible protease from the thermophilic bacterium Coprothermobacter proteolyticus

Through genome mining, we identified a gene encoding a putative serine protease of the thermitase subgroup of subtilases (EC 3.4.21.66) in the thermophilic bacterium Coprothermobacter proteolyticus. The gene was functionally expressed in Escherichia coli, and the enzyme, which we called proteolysin, was purified to near homogeneity from crude cell lysate by a single heat treatment step. Proteolysin has a broad pH tolerance and is active at temperatures of up to 80°C. In addition, the enzyme shows good activity and stability in the presence of organic solvents, detergents, and dithiothreitol, and it remains active in 6 M guanidinium hydrochloride. Based on its stability and activity profile, proteolysin can be an excellent candidate for applications where resistance to harsh process conditions is required.

The Multi-Leu peptide inhibitor discriminates between PACE4 and furin and exhibits antiproliferative effects on prostate cancer cells

The proprotein convertases (PCs) play an important role in protein precursor activation through processing at paired basic residues. However, significant substrate cleavage redundancy has been reported between PCs. The question remains whether specific PC inhibitors can be designed. This study describes the identification of the sequence LLLLRVKR, named Multi-Leu (ML)-peptide, that displayed a 20-fold selectivity on PACE4 over furin, two enzymes with similar structural characteristics. We have previously demonstrated that PACE4 plays an important role in prostate cancer and could be a druggable target. The present study demonstrates that the ML-peptide significantly reduced the proliferation of DU145 and LNCaP prostate cancer-derived cell lines and induced G₀/G₁ cell cycle arrest. However, the ML-peptide must enter the cell to inhibit proliferation. It is concluded that peptide-based inhibitors can yield specific PC inhibitors and that the ML-peptide is an important lead compound that could potentially have applications in prostate cancer.

Insights into the maturation of hyperthermophilic pyrolysin and the roles of its N-terminal propeptide and long C-terminal extension

Pyrolysin-like proteases from hyperthermophiles are characterized by large insertions and long C-terminal extensions (CTEs). However, little is known about the roles of these extra structural elements or the maturation of these enzymes. Here, the recombinant proform of Pyrococcus furiosus pyrolysin (Pls) and several N- and C-terminal deletion mutants were successfully expressed in Escherichia coli. Pls was converted to mature enzyme (mPls) at high temperatures via autoprocessing of both the N-terminal propeptide and the C-terminal portion of the long CTE, indicating that the long CTE actually consists of the C-terminal propeptide and the C-terminal extension (CTEm), which remains attached to the catalytic domain in the mature enzyme. Although the N-terminal propeptide deletion mutant PlsΔN displayed weak activity, this mutant was highly susceptible to autoproteolysis and/or thermogenic hydrolysis. The N-terminal propeptide acts as an intramolecular chaperone to assist the folding of pyrolysin into its thermostable conformation. In contrast, the C-terminal propeptide deletion mutant PlsΔC199 was converted to a mature form (mPlsΔC199), which is the same size as but less stable than mPls, suggesting that the C-terminal propeptide is not essential for folding but is important for pyrolysin hyperthermostability. Characterization of the full-length (mPls) and CTEm deletion (mPlsΔC740) mature forms demonstrated that CTEm not only confers additional stability to the enzyme but also improves its catalytic efficiency for both proteineous and small synthetic peptide substrates. Our results may provide important clues about the roles of propeptides and CTEs in the adaptation of hyperthermophilic proteases to hyperthermal environments.

Rahman RNZR, Leow TC, Ali MSM, Basri M, Salleh AB. Improvement of thermal stability via outer-loop ion pair interaction of mutated T1 lipase from Geobacillus zalihae strain T1

Mutant D311E and K344R were constructed using site-directed mutagenesis to introduce an additional ion pair at the inter-loop and the intra-loop, respectively, to determine the effect of ion pairs on the stability of T1 lipase isolated from Geobacillus zalihae. A series of purification steps was applied, and the pure lipases of T1, D311E and K344R were obtained. The wild-type and mutant lipases were analyzed using circular dichroism. The T_m for T1 lipase, D311E lipase and K344R lipase were approximately 68.52 °C, 70.59 °C and 68.54 °C, respectively. Mutation at D311 increases the stability of T1 lipase and exhibited higher T_m as compared to the wild-type and K344R. Based on the above, D311E lipase was chosen for further study. D311E lipase was successfully crystallized using the sitting drop vapor diffusion method. The crystal was diffracted at 2.1 Å using an in-house X-ray beam and belonged to the monoclinic space group C2 with the unit cell parameters a = 117.32 Å, b = 81.16 Å and c = 100.14 Å. Structural analysis showed the existence of an additional ion pair around E311 in the structure of D311E. The additional ion pair in D311E may regulate the stability of this mutant lipase at high temperatures as predicted in silico and spectroscopically.

Isolation and characterization of two serine proteases from metagenomic libraries of the Gobi and Death Valley deserts

The screening of environmental DNA metagenome libraries for functional activities can provide an important source of new molecules and enzymes. In this study, we identified 17 potential protease-producing clones from two metagenomic libraries derived from samples of surface sand from the Gobi and Death Valley deserts. Two of the proteases, DV1 and M30, were purified and biochemically examined. These two proteases displayed a molecular mass of 41.5 kDa and 45.7 kDa, respectively, on SDS polyacrylamide gels. Alignments with known protease sequences showed less than 55% amino acid sequence identity. These two serine proteases appear to belong to the subtilisin (S8A) family and displayed several unique biochemical properties. Protease DV1 had an optimum pH of 8 and an optimal activity at 55°C, while protease M30 had an optimum pH >11 and optimal activity at 40°C. The properties of these enzymes make them potentially useful for biotechnological applications and again demonstrate that metagenomic approaches can be useful, especially when coupled with the study of novel environments such as deserts.

Expression and characterization of a novel mesophilic protease from metagenomic library derived from Antarctic coastal sediment

A metagenomic cosmid library was constructed, in which the insert DNA was derived from the coastal sediment near Antarctic China Zhongshan Station. One clone (ACPRO001) expressing protease activity was isolated from the library using milk agar plates. Sequencing of the clone revealed a novel protease gene. The amino acid sequence comparison and phylogenetic analysis indicated that it could be classified as a subtilisin-like serine protease, though the highly conserved residue Asp was replaced by Ala. The ACPRO001 protease gene was expressed in pET-His and purified for characterization. The optimal temperature and pH for the activity of the ACPRO001 protease were 60°C and pH 9.0, respectively. The enzyme retained about 73% of residual activity after 2 h incubation at 50°C in the presence of Ca(2+). The presence of Ca(2+) increased the thermostability of ACPRO001 protease obviously. The enzymatic activity was inhibited by 1 mM phenylmethyl sulfonylfluoride (PMSF) and hydrochloride 4-(2-aminoethyl)-benzenesulfonyl fluoride (AEBSF), indicating that it was a serine protease.

Cloning, expression and characterization of the serine protease gene from Chaetomium thermophilum

AIMS

Microbial proteases play an essential role in scientific research and commercial applications. This study is to clone, sequence, and express a thermostable protease gene from the thermophilic fungi Chaetomium thermophilum and to generate yeast strains expressing C. thermophilum protease suitable for industrial applications.

METHODS AND RESULTS

Degenerate primers were designed based on the conserved domain of other identified serine proteases and cDNA fragment of C. thermophilum gene pro was obtained through reverse transcriptase-polymerase chain reaction (RT-PCR). The full-length cDNA of 2007 bp was generated using RACE amplification. The cDNA contains an open reading frame of 1596 bp encoding 532 amino acids. Sequence analysis of the deduced amino acid sequence revealed high homology with the catalytic domains of the subtilisin serine proteases. The C. thermophilum gene pro was expressed in Escherichia coli BL21 (DE3) and Pichia pastoris, respectively and soluble protein was obtained in P. pastoris. The expressed protease was secreted into the culture medium by the yeast in a functional active form and the purified recombinant protease exhibits optimum catalytic activity at pH 8.0 and 60 degrees C. The enzyme is stable at 60 degrees C. The integration of gene pro into P. pastoris genome is stable after 10 generations and the yeast transformants showed a consistent protease expression.

CONCLUSIONS

Gene pro encoding a serine protease from C. thermophilum was cloned, sequenced, and overexpressed successfully in P. pastoris. The expressed protease was purified and the properties of the recombinant protease are characterized.

SIGNIFICANCE AND IMPACT OF THE STUDY

Chaetomium thermophilum is a soil-borne thermophilic fungus and the protease cloned from it is stable in a high temperature and a wide rage of pH. The overexpression of the enzyme in a mesophilic micro-organism offers a potential value for scientific research and commercial applications.

Biochemical properties of Bacillus intermedius subtilisin-like proteinase secreted by a Bacillus subtilis recombinant strain in its stationary phase of growth

Biochemical properties of Bacillus intermedius subtilisin-like proteinase (AprBi) secreted by a B. subtilis recombinant strain in the early and late stationary phases of growth have been determined. Protein structure was analyzed and its stability estimated. It was noted that the enzyme corresponding to different phases of bacterial growth retains activity in the presence of reducing and oxidizing agents (C2H5OH and H2O2). Different effects of bivalent metal ions on activity of two proteinase fractions were found. Calcium ions more efficiently activate proteinase secreted in the late stationary phase. Unlike the first enzyme fraction, the second forms catalytically active dimers.

Prediction of signal peptides in archaea

Computational prediction of signal peptides (SPs) and their cleavage sites is of great importance in computational biology; however, currently there is no available method capable of predicting reliably the SPs of archaea, due to the limited amount of experimentally verified proteins with SPs. We performed an extensive literature search in order to identify archaeal proteins having experimentally verified SP and managed to find 69 such proteins, the largest number ever reported. A detailed analysis of these sequences revealed some unique features of the SPs of archaea, such as the unique amino acid composition of the hydrophobic region with a higher than expected occurrence of isoleucine, and a cleavage site resembling more the sequences of gram-positives with almost equal amounts of alanine and valine at the position-3 before the cleavage site and a dominant alanine at position-1, followed in abundance by serine and glycine. Using these proteins as a training set, we trained a hidden Markov model method that predicts the presence of the SPs and their cleavage sites and also discriminates such proteins from cytoplasmic and transmembrane ones. The method performs satisfactorily, yielding a 35-fold cross-validation procedure, a sensitivity of 100% and specificity 98.41% with the Matthews' correlation coefficient being equal to 0.964. This particular method is currently the only available method for the prediction of secretory SPs in archaea, and performs consistently and significantly better compared with other available predictors that were trained on sequences of eukaryotic or bacterial origin. Searching 48 completely sequenced archaeal genomes we identified 9437 putative SPs. The method, PRED-SIGNAL, and the results are freely available for academic users at http://bioinformatics.biol.uoa.gr/PRED-SIGNAL/ and we anticipate that it will be a valuable tool for the computational analysis of archaeal genomes.

Crystal structure of a family 16 endoglucanase from the hyperthermophile Pyrococcus furiosus--structural basis of substrate recognition

Bacterial and archaeal endo-beta-1,3-glucanases that belong to glycoside hydrolase family 16 share a beta-jelly-roll fold, but differ significantly in sequence and in substrate specificity. The crystal structure of the laminarinase (EC 3.2.1.39) from the hyperthermophilic archaeon Pyrococcus furiosus (pfLamA) has been determined at 2.1 A resolution by molecular replacement. The pfLamA structure reveals a kink of six residues (72-77) at the entrance of the catalytic cleft. This peptide is absent in the endoglucanases from alkaliphilic Nocardiopsis sp. strain F96 and Bacillus macerans, two proteins displaying an overall fold similar to that of pfLamA, but with different substrate specificity. A deletion mutant of pfLamA, lacking residues 72-75, hydrolyses the mixed-linkage beta-1,3-1,4-glucan lichenan 10 times more efficiently than the wild-type protein, indicating the importance of the kink in substrate preference.

Effect of selected Ser/Ala and Xaa/Pro mutations on the stability and catalytic properties of a cold adapted subtilisin-like serine proteinase

A subtilisin-like serine proteinase from a psychrotrophic Vibrio species (VPR) shows distinct cold adapted traits regarding stability and catalytic properties, while sharing high sequence homology with enzymes adapted to higher temperatures. Based on comparisons of sequences and examination of 3D structural models of VPR and related enzymes of higher temperature origin, five sites were chosen to be subject to site directed mutagenesis. Three serine residues were substituted with alanine and two residues in loops were substituted with proline. The single mutations were combined to make double and triple mutants. The single Ser/Ala mutations had a moderately stabilizing effect and concomitantly decreased catalytic efficiency. Introducing a second Ser/Ala mutation did not have additive effect on stability; on the contrary a double Ser/Ala mutant had reduced stability with regard to both wild type and single mutants. The Xaa/Pro mutations stabilized the enzyme and did also tend to decrease the catalytic efficiency more than the Ser/Ala mutations.

The crystal structure of a hyperthermostable subfamily II isocitrate dehydrogenase from Thermotoga maritima

Isocitrate dehydrogenase (IDH) from the hyperthermophile Thermotoga maritima (TmIDH) catalyses NADP+- and metal-dependent oxidative decarboxylation of isocitrate to alpha-ketoglutarate. It belongs to the beta-decarboxylating dehydrogenase family and is the only hyperthermostable IDH identified within subfamily II. Furthermore, it is the only IDH that has been characterized as both dimeric and tetrameric in solution. We solved the crystal structure of the dimeric apo form of TmIDH at 2.2 A. The R-factor of the refined model was 18.5% (R(free) 22.4%). The conformation of the TmIDH structure was open and showed a domain rotation of 25-30 degrees compared with closed IDHs. The separate domains were found to be homologous to those of the mesophilic mammalian IDHs of subfamily II and were subjected to a comparative analysis in order to find differences that could explain the large difference in thermostability. Mutational studies revealed that stabilization of the N- and C-termini via long-range electrostatic interactions were important for the higher thermostability of TmIDH. Moreover, the number of intra- and intersubunit ion pairs was higher and the ionic networks were larger compared with the mesophilic IDHs. Other factors likely to confer higher stability in TmIDH were a less hydrophobic and more charged accessible surface, a more hydrophobic subunit interface, more hydrogen bonds per residue and a few loop deletions. The residues responsible for the binding of isocitrate and NADP+ were found to be highly conserved between TmIDH and the mammalian IDHs and it is likely that the reaction mechanism is the same.

Cloning and expression of islandisin, a new thermostable subtilisin from Fervidobacterium islandicum, in Escherichia coli

A gene encoding a subtilisin-like protease, designated islandisin, from the extremely thermophilic bacterium Fervidobacterium islandicum (DSMZ 5733) was cloned and actively expressed in Escherichia coli. The gene was identified by PCR using degenerated primers based on conserved regions around two of the three catalytic residues (Asp, His, and Ser) of subtilisin-like serine protease-encoding genes. Using inverse PCR regions flanking the catalytic residues, the gene could be cloned. Sequencing revealed an open reading frame of 2,106 bp. The deduced amino acid sequence indicated that the enzyme is synthesized as a proenzyme with a putative signal sequence of 33 amino acids (aa) in length. The mature protein contains the three catalytic residues (Asp177, His215, and Ser391) and has a length of 668 aa. Amino acid sequence comparison and phylogenetic analysis indicated that this enzyme could be classified as a subtilisin-like serine protease in the subgroup of thermitase. The whole gene was amplified by PCR, ligated into pET-15b, and successfully expressed in E. coli BL21(DE3)pLysS. The recombinant islandisin was purified by heat denaturation, followed by hydroxyapatite chromatography. The enzyme is active at a broad range of temperatures (60 to 80 degrees C) and pHs (pH 6 to 8.5) and shows optimal proteolytic activity at 80 degrees C and pH 8.0. Islandisin is resistant to a number of detergents and solvents and shows high thermostability over a long period of time (up to 32 h) at 80 degrees C with a half-life of 4 h at 90 degrees C and 1.5 h at 100 degrees C.

Extreme environments as a resource for microorganisms and novel biocatalysts

The steady increase in the number of newly isolated extremophilic microorganisms and the discovery of their enzymes by academic and industrial institutions underlines the enormous potential of extremophiles for application in future biotechnological processes. Enzymes from extremophilic microorganisms offer versatile tools for sustainable developments in a variety of industrial application as they show important environmental benefits due to their biodegradability, specific stability under extreme conditions, improved use of raw materials and decreased amount of waste products. Although major advances have been made in the last decade, our knowledge of the physiology, metabolism, enzymology and genetics of this fascinating group of extremophilic microorganisms and their related enzymes is still limited. In-depth information on the molecular properties of the enzymes and their genes, however, has to be obtained to analyze the structure and function of proteins that are catalytically active around the boiling and freezing points of water and extremes of pH. New techniques, such as genomics, metanogenomics, DNA evolution and gene shuffling, will lead to the production of enzymes that are highly specific for countless industrial applications. Due to the unusual properties of enzymes from extremophiles, they are expected to optimize already existing processes or even develop new sustainable technologies.

Proteolysis in hyperthermophilic microorganisms

Proteases are found in every cell, where they recognize and break down unneeded or abnormal polypeptides or peptide-based nutrients within or outside the cell. Genome sequence data can be used to compare proteolytic enzyme inventories of different organisms as they relate to physiological needs for protein modification and hydrolysis. In this review, we exploit genome sequence data to compare hyperthermophilic microorganisms from the euryarchaeotal genus Pyrococcus, the crenarchaeote Sulfolobus solfataricus, and the bacterium Thermotoga maritima. An overview of the proteases in these organisms is given based on those proteases that have been characterized and on putative proteases that have been identified from genomic sequences, but have yet to be characterized. The analysis revealed both similarities and differences in the mechanisms utilized for proteolysis by each of these hyperthermophiles and indicated how these mechanisms relate to proteolysis in less thermophilic cells and organisms.

A new subfamily of fungal subtilases: structural and functional analysis of a Pleurotus ostreatus member

Pleurotus ostreatus produces several extracellular proteases which are believed to be involved in the regulation of the ligninolytic activities of this fungus. Recently, purification and characterization of the most abundant P. ostreatus extracellular protease (PoSl) have been reported. The sequence of the posl gene and of the corresponding cDNA has been determined, allowing the identification of its pre- and pro-sequences. A mature protein sequence has been verified by mass spectrometry mapping, the N-glycosylation sites have been identified and the glycosidic moieties characterized. Mature PoSl shows a cleaved peptide bond in the C-terminal region, which remains associated with the catalytic domain in a non-covalent complex. Reported results indicate that this enzyme is involved in the activation of other P. ostreatus secreted proteases, thus suggesting its leading role in cascade activation mechanisms. Analyses of the PoSl sequence by homology search resulted in the identification of a DNA sequence encoding a new protease, homologous to PoSl, in the Phanerochaete chrysosporium genome. A new subgroup of subtilisin-like proteases, belonging to the pyrolysin family, has been defined, which includes proteases from ascomycete and basidiomycete fungi.

An evolutionary route to xylanase process fitness

Directed evolution technologies were used to selectively improve the stability of an enzyme without compromising its catalytic activity. In particular, this article describes the tandem use of two evolution strategies to evolve a xylanase, rendering it tolerant to temperatures in excess of 90 degrees C. A library of all possible 19 amino acid substitutions at each residue position was generated and screened for activity after a temperature challenge. Nine single amino acid residue changes were identified that enhanced thermostability. All 512 possible combinatorial variants of the nine mutations were then generated and screened for improved thermal tolerance under stringent conditions. The screen yielded eleven variants with substantially improved thermal tolerance. Denaturation temperature transition midpoints were increased from 61 degrees C to as high as 96 degrees C. The use of two evolution strategies in combination enabled the rapid discovery of the enzyme variant with the highest degree of fitness (greater thermal tolerance and activity relative to the wild-type parent).

Comparative analysis of thermoadaptation within the archaeal glyceraldehyde-3-phosphate dehydrogenases from mesophilic Methanobacterium bryantii and thermophilic Methanothermus fervidus

To gain insight into the molecular determinants of thermoadaptation within the family of archaeal glyceraldehyde-3-phosphate dehydrogenases (GAPDH), a homology-based 3-D model of the mesophilic GAPDH from Methanobacterium bryantii was built and compared with the crystal structure of the thermophilic GAPDH from Methanothermus fervidus. The homotetrameric model of the holoenzyme was initially assembled from identical subunits completed with NADP molecules. The structure was then refined by energy minimization and simulated-annealing procedures. PROCHECK and the 3-D profile method were used to appraise the model reliability. Striking molecular features underlying the difference in stability between the enzymes were deduced from their structural comparison. First, both the increase in hydrophobic contacts and the decrease in accessibility to the protein core were shown to discriminate in favor of the thermophilic enzyme. Besides, but to a lesser degree, the number of ion pairs involved in cooperative clusters appeared to correlate with thermostability. Finally, the decreased stability of the mesophilic enzyme was also predicted to proceed from both the lack of charge-dipole interactions within alpha-helices and the enhanced entropy of unfolding due to an increase in chain flexibility. Thus, archaeal GAPDHs appear to be governed by thermoadaptation rules that differ in some aspects from those previously observed within their eubacterial counterparts.

Patterns of adaptation in a laboratory evolved thermophilic enzyme

The heat sensitive psychrophilic protease subtilisin S41 was previously subjected to three rounds of mutagenesis/recombination and screening, resulting in variant 3-2G7, whose half-life at 60 degrees C is approx. 500 times that of wild-type. Here we report the results of five additional generations of laboratory evolution starting from 3-2G7. The half-life of 8th generation enzyme 8-4A9 at 60 degrees C is 1200 times that of wild-type, and slightly more than twice that of 3-2G7. This half-life is >20-fold greater than those of homologous mesophilic subtilisins SSII and BPN'. Circular dichroism melting curves indicate that subtilisin 8-4A9 unfolds at temperatures approx. 25 degrees C higher than wild-type. It is also substantially more resistant to proteolysis at 30 degrees C. Nearly half of the 13 amino acid substitutions accumulated in 8-4A9 involve the mutation of serine residues. This mirrors a pattern observed in natural proteins, where serines are statistically less prevalent in thermophilic enzymes compared to mesophilic ones.

Active subtilisin-like protease from a hyperthermophilic archaeon in a form with a putative prosequence

The gene encoding subtilisin-like protease T. kodakaraensis subtilisin was cloned from a hyperthermophilic archaeon Thermococcus kodakaraensis KOD1. T. kodakaraensis subtilisin is a member of the subtilisin family and composed of 422 amino acid residues with a molecular weight of 43,783. It consists of a putative presequence, prosequence, and catalytic domain. Like bacterial subtilisins, T. kodakaraensis subtilisin was overproduced in Escherichia coli in a form with a putative prosequence in inclusion bodies, solubilized in the presence of 8 M urea, and refolded and converted to an active molecule. However, unlike bacterial subtilisins, in which the prosequence was removed from the catalytic domain by autoprocessing upon refolding, T. kodakaraensis subtilisin was refolded in a form with a putative prosequence. This refolded protein of recombinant T. kodakaraensis subtilisin which is composed of 398 amino acid residues (Gly(-82) to Gly(316)), was purified to give a single band on a sodium dodecyl sulfate (SDS)-polyacrylamide gel and characterized for biochemical and enzymatic properties. The good agreement of the molecular weights estimated by SDS-polyacrylamide gel electrophoresis (44,000) and gel filtration (40,000) suggests that T. kodakaraensis subtilisin exists in a monomeric form. T. kodakaraensis subtilisin hydrolyzed the synthetic substrate N-succinyl-Ala-Ala-Pro-Phe-p-nitroanilide only in the presence of the Ca(2+) ion with an optimal pH and temperature of pH 9.5 and 80 degrees C. Like bacterial subtilisins, it showed a broad substrate specificity, with a preference for aromatic or large nonpolar P1 substrate residues. However, it was much more stable than bacterial subtilisins against heat inactivation and lost activity with half-lives of >60 min at 80 degrees C, 20 min at 90 degrees C, and 7 min at 100 degrees C.

Molecular identification of a mechanosensitive channel in archaea

The TM1 domain of the large conductance mechanosensitive (MS) channel of Escherichia coli was used as a genetic probe to search the genomic database of the archaeon Methanoccoccus jannashii for MscL homologs. We report that the hypothetical protein MJ0170 of M. jannashii exhibited 38.5% sequence identity with the TM1 domain of Eco-MscL. Moreover, MJ0170 was found to be a conserved homolog of MscS, the second type of E. coli MS channel encoded by the yggB gene. Furthermore, we identified a cluster of charged residues KIKEE in the C-terminus of MJ0170 that strikingly resembled the charged C-terminal amino acid cluster present in Eco-MscL (RKKEE). We cloned and expressed MJ0170 in E. coli, which when reconstituted into liposomes or expressed in the cell membrane of giant E. coli spheroplasts, exhibited similar activity to the bacterial MS channels. Our study suggests that the M. jannashii MS channel and its homologs evolved as a result of gene duplication of the ancestral MscL-like molecule with the TM1 domain remaining the most conserved structural motif among prokaryotic MS channels.

Cold-active serine alkaline protease from the psychrotrophic bacterium Shewanella strain ac10: gene cloning and enzyme purification and characterization

The gene encoding serine alkaline protease (SapSh) of the psychrotrophic bacterium Shewanella strain Ac10 was cloned in Escherichia coli. The amino acid sequence deduced from the 2,442-bp nucleotide sequence revealed that the protein was 814 amino acids long and had an estimated molecular weight of 85,113. SapSh exhibited sequence similarities with members of the subtilisin family of proteases, and there was a high level of conservation in the regions around a putative catalytic triad consisting of Asp-30, His-65, and Ser-369. The amino acid sequence contained the following regions which were assigned on the basis of homology to previously described sequences: a signal peptide (26 residues), a propeptide (117 residues), and an extension up to the C terminus (about 250 residues). Another feature of SapSh is the fact that the space between His-65 and Ser-369 is approximately 150 residues longer than the corresponding spaces in other proteases belonging to the subtilisin family. SapSh was purified to homogeneity from the culture supernatant of E. coli recombinant cells by affinity chromatography with a bacitracin-Sepharose column. The recombinant SapSh (rSapSh) was found to have a molecular weight of about 44,000 and to be highly active in the alkaline region (optimum pH, around 9.0) when azocasein and synthetic peptides were used as substrates. rSapSh was characterized by its high levels of activity at low temperatures; it was five times more active than subtilisin Carlsberg at temperatures ranging from 5 to 15 degreesC. The activation energy for hydrolysis of azocasein by rSapSh was much lower than the activation energy for hydrolysis of azocasein by the subtilisin. However, rSapSh was far less stable than the subtilisin.

Extremely thermostable serine-type protease from Aquifex pyrophilus. Molecular cloning, expression, and characterization

A gene encoding a serine-type protease has been cloned from Aquifex pyrophilus using a sequence tag containing the consensus sequence of proteases as a probe. Sequence analysis of the cloned gene reveals an open reading frame of 619 residues that has three canonical residues (Asp-140, His-184, and Ser-502) that form the catalytic site of serine-type proteases. The size of the mature form (43 kDa) and its localization in the cell wall fraction indicate that both the NH2- and COOH-terminal sequences of the protein are processed during maturation. When the cloned gene is expressed in Escherichia coli, it is weakly expressed as active and processed forms. The pH optimum of this protease is very broad, and its activity is completely inactivated by phenylmethylsulfonyl fluoride. The half-life of the protein is 6 h at 105 degreesC, suggesting that it is one of the most heat-stable proteases. The cysteine residues in the mature form may form disulfide bonds that are responsible for the strong stability of this protease, because the thermostability of the protein is significantly reduced in the presence of reducing reagent.