Projecting mechanics into morphospace: disparity in the feeding system of labrid fishes

Four-bar Geometry is Shared among Ecologically DivergentFish Species

Understanding the factors that influence morphological evolution is a major goal in biology. One such factor is the ability to acquire and process prey. Prey hardness and evasiveness are important properties that can impact evolution of the jaws. Similar diets and biomechanical systems have repeatedly evolved among fish lineages, providing an opportunity to test for shared patterns of evolution across distantly related organisms. Four-bar linkages are structures often used by animals to transmit force and motion during feeding and that provide an excellent system to understand the impact of diet on morphological and biomechanical evolution. Here, we tested how diet influences the evolutionary dynamics of the oral four-bar linkage system in wrasses (Family: Labridae) and cichlids (Family: Cichlidae). We found that shifts in prey hardness/evasiveness are associated with limited modifications in four-bar geometry across these two distantly related fish lineages. Wrasse and cichlid four-bar systems largely exhibit many-to-one mapping in response to dietary shifts. Across two iconic adaptive radiations of fish, an optimal four-bar geometry has largely been co-opted for different dietary functions during their extensive ecological diversification. Given the exceptional jaw diversity of both lineages, many-to-one mapping of morphology to mechanical properties may be a core feature of fish adaptive radiation.

Ecophenotypic Variation of Midas Cichlid, Amphilophus citrinellus (Gunther, 1864), in Lake Batur, Bali, Indonesia

Cichlid fishes exhibit rapid adaptive radiations with significant diversification rates in response to ecological variability, i.e., ecological opportunity or geographical isolation. The discovery of a Midas cichlid species in Lake Batur, Indonesia's largest volcanic lake, first reported in 2013, could represent such adaptations. Midas cichlids can now be found in a range of habitats in Lake Batur and dominate the lake's fish population by up to 60%. This study aimed to identify the interaction between habitat, water quality, and Midas cichlid in Lake Batur, facilitating morphometric variances in the fish populations. The fish were captured at five locations in Lake Batur using fishing rods, community nets with mesh sizes of 2-3 inches, experimental gillnets with mesh sizes of 1 inch, and fish scoops in floating net cages during August and November 2022. There were 46 fish samples caught from the five stations, all photographed using a digital camera and later measured using the ZEN 2012 software. The fish measurement employed a truss morphometric method using 21 distinct morphometric body features. Canonical analysis was used to determine the distribution of characteristics, while discriminant analysis was used to examine the closeness of association. The measured water quality parameters included pH, DO, temperature, conductivity, and TDS for in-situ and TSS, TP, TN, and chlorophyll A for ex-situ. The findings revealed morphometric changes among Midas cichlid species in Lake Batur caused by habitat and water quality differences. The distinction can be detected in the anterior and posterior bodies (C1, B1, C3, C6, C5, B3 and B4). Temperature and aquatic plants, Azolla pinnata, may detect the station and shape of fish in Lake Batur. Body shape cannot be identified by chlorophyll A, TN, DO, and TDS. Future genetic research could answer why fish groups with varied body types coexist in the same location.

Organismal form constrains the evolution of complex lever systems in Neotropical cichlid four-bar linkages

The diversification of functional traits may be limited by the intrinsic constraints of organismal form (i.e., constructional constraints), owing to the differential investment in different anatomical structures. In this study, we test whether overall organismal form impacts the evolution of shape and function in complex lever systems. We examined the relationship between four-bar shape and overall head shape in two four-bar linkage systems: the oral-jaw and hyoid-neurocranium systems in Neotropical cichlids. We also investigated the strength of form-function mapping in these four-bar linkages and the impact of constraining head shape on these correlations. We quantified the shape of the head and two four-bar linkages using geometric morphometrics and compared these with the kinematic transmission coefficient of each linkage system. The shapes of both linkages were strongly correlated with their mechanical properties, and head shape appears to constrain the shape of both four-bar linkages. Head shape induced greater integration between the two linkages, was associated with stronger form-function correlations and higher rates of evolution in biomechanically important features. Head shape constraints may also contribute to a weak but significant trade-off in linkage kinematics. Elongation of the head and body, in particular, appears to minimize the impact of this trade-off, possibly through maximizing anterior-posterior space availability. However, the strength of relationships between shape and function, and the impact of head shape differed between the two linkages, with the hyoid four-bar in general showing stronger form-function relationships despite being more independent from head shape constraints.

Functional trait plasticity diverges between sexes in African cichlids: A contribution toward ecological sexual dimorphism?

Phenotypic plasticity enables development to produce multiple phenotypes in response to environmental conditions. Plasticity driven variation has been suggested to play a key role in adaptive divergence, and plasticity itself can evolve. However, the interaction of plasticity with the multiple levels involved with adaptive divergence is less understood. For example, sexual dimorphism can contribute adaptive variation through ecological sexual dimorphism (ESD), but the contribution of plasticity to this phenomenon is unknown. Therefore, to determine the potential contribution of plasticity to ESD, we used the adaptive radiation of Malawi cichlids. Two mouthbrooding species (Labeotropheus fuelleborni and Tropheops "Red Cheek") with differences in foraging tactics underwent foraging experiments using benthic and limnetic treatments while accounting for sex. Plasticity in craniofacial shape and three functionally important traits were measured. Plasticity was shown, but without any sex-based differences in shape. However, for mechanical advantage traits of the mandible sex by diet interactions were found. This suggests that ESD, may be influenced by phenotypic plasticity that diverges between sexes. Given the involvement of the mandible in parental care in cichlids this may indicate that sexual divergence in plasticity may trade-off against maternal care tactics.

Bridging Performance and Adaptive Landscapes to Understand Long-Term Functional Evolution

AbstractUnderstanding functional adaptation demands an integrative framework that captures the complex interactions between form, function, ecology, and evolutionary processes. In this review, we discuss how to integrate the following two distinct approaches to better understand functional evolution: (1) the adaptive landscape approach (ALA), aimed at finding adaptive peaks for different ecologies, and (2) the performance landscape approach (PLA), aimed at finding performance peaks for different ecologies. We focus on the Ornstein-Uhlenbeck process as the evolutionary model for the ALA and on biomechanical modeling to estimate performance for the PLA. Whereas both the ALA and the PLA have each given insight into functional adaptation, separately they cannot address how much performance contributes to fitness or whether evolutionary constraints have played a role in form-function evolution. We show that merging these approaches leads to a deeper understanding of these issues. By comparing the locations of performance and adaptive peaks, we can infer how much performance contributes to fitness in species' current environments. By testing for the relevance of history on phenotypic variation, we can infer the influence of past selection and constraints on functional adaptation. We apply this merged framework in a case study of turtle shell evolution and explain how to interpret different possible outcomes. Even though such outcomes can be quite complex, they represent the multifaceted relations among function, fitness, and constraints.

Functional morphology of prey capture in stream-dwelling sailfin silversides (Telmatherinidae) based on high-speed video recordings

Understanding how ecology shapes the evolution of morphological traits is a major goal in organismal biology. By quantifying force of motion, hypotheses on the function of fundamental tasks of animals like feeding can be tested. Ray-finned fishes use various feeding strategies, classified into three main feeding modes: suction, ram and manipulation. While manipulation feeders are usually distinct in morphology and feeding behavior, differentiation between suction and ram feeders is often fine-scaled and transitional. Previous studies have identified different feeding modes and biomechanical adaptations on interspecific and intersexual levels in lake-dwelling sailfin silversides, species of a Sulawesi freshwater radiation. Functional feeding morphology of stream-dwelling species remained in contrast unstudied. We hypothesized that different requirements of riverine habitats favor the evolution of alternative functional adaptations in stream-dwelling sailfin silversides. To test this hypothesis, we investigated feeding of two phenotypically distinct riverine species, Telmatherina bonti and Marosatherina ladigesi, and their sexes, by high-speed videos and biomechanical models. The kinematic approaches identify T. bonti as ram feeder and M. ladigesi as suction feeder. Surprisingly, the biomechanical models of the jaw apparatus provide contradicting results: only one out of three studied parameters varies between both species. Contrarily to lake-dwelling Telmatherina, sexes of both species do not differ in feeding biomechanics. We conclude that T. bonti predominantly uses ram feeding while M. ladigesi primarily uses suction feeding as its main hunting strategy. Feeding biomechanics of stream-dwelling sailfin silversides are less distinct compared to lake-dwelling species, likely due to different trophic ecologies or less stable ecological conditions.

Shifts in morphological covariation and evolutionary rates across multiple acquisitions of the trap-jaw mechanism in Strumigenys

A long-standing question in comparative biology is how the evolution of biomechanical systems influences morphological evolution. The need for functional fidelity implies that the evolution of such systems should be associated with tighter morphological covariation, which may promote or dampen rates of morphological evolution. I examine this question across multiple evolutionary origins of the trap-jaw mechanism in the genus Strumigenys. Trap-jaw ants have latch-mediated, spring-actuated systems that amplify the power output of their mandibles. I use Bayesian estimates of covariation and evolutionary rates to test the hypotheses that the evolution of this high-performance system is associated with tighter morphological covariation in the head and mandibles relative to nontrap-jaw forms and that this leads to shifts in rates of morphological evolution. Contrary to these hypotheses, there is no evidence of a large-scale shift to higher covariation in trap-jaw forms, while different traits show both increased and decreased evolutionary rates between forms. These patterns may be indicative of many-to-one mapping and/or mechanical sensitivity in the trap-jaw LaMSA system. Overall, it appears that the evolution of trap-jaw forms in Strumigenys did not require a correlated increase in morphological covariation, partly explaining the proclivity with which the system has evolved.

The role of paleontological data in bryophyte systematics

Systematics reconstructs tempo and mode in biological evolution by resolving the phylogenetic fabric of biodiversity. The staggering duration and complexity of evolution, coupled with loss of information (extinction), render exhaustive reconstruction of the evolutionary history of life unattainable. Instead, we sample its products-phenotypes and genotypes-to generate phylogenetic hypotheses, which we sequentially reassess and update against new data. Current consensus in evolutionary biology emphasizes fossil integration in total-evidence analyses, requiring in-depth understanding of fossils-age, phenotypes, and systematic affinities-and a detailed morphological framework uniting fossil and extant taxa. Bryophytes present a special case: deep evolutionary history but sparse fossil record and phenotypic diversity encompassing small dimensional scales. We review how these peculiarities shape fossil inclusion in bryophyte systematics. Paucity of the bryophyte fossil record, driven primarily by phenotypic (small plant size) and ecological constraints (patchy substrate-hugging populations), and incomplete exploration, results in many morphologically isolated, taxonomically ambiguous fossil taxa. Nevertheless, instances of exquisite preservation and pioneering studies demonstrate the feasibility of including bryophyte fossils in evolutionary inference. Further progress will arise from developing extensive morphological matrices for bryophytes, continued exploration of the fossil record, re-evaluation of previously described fossils, and training specialists in identification and characterization of bryophyte fossils, and in bryophyte morphology.

A new theoretical performance landscape for suction feeding reveals adaptive kinematics in a natural population of reef damselfish

Understanding how organismal traits determine performance and, ultimately, fitness is a fundamental goal of evolutionary eco-morphology. However, multiple traits can interact in non-linear and context-dependent ways to affect performance, hindering efforts to place natural populations with respect to performance peaks or valleys. Here, we used an established mechanistic model of suction-feeding performance (SIFF) derived from hydrodynamic principles to estimate a theoretical performance landscape for zooplankton prey capture. This performance space can be used to predict prey capture performance for any combination of six morphological and kinematic trait values. We then mapped in situ high-speed video observations of suction feeding in a natural population of a coral reef zooplanktivore, Chromis viridis, onto the performance space to estimate the population's location with respect to the topography of the performance landscape. Although the kinematics of the natural population closely matched regions of high performance in the landscape, the population was not located on a performance peak. Individuals were furthest from performance peaks on the peak gape, ram speed and mouth opening speed trait axes. Moreover, we found that the trait combinations in the observed population were associated with higher performance than expected by chance, suggesting that these combinations are under selection. Our results provide a framework for assessing whether natural populations occupy performance optima.

Are fish communities on coral reefs becoming less colourful?

An organism's colouration is often linked to the environment in which it lives. The fishes that inhabit coral reefs are extremely diverse in colouration, but the specific environmental factors that support this extreme diversity remain unclear. Interestingly, much of the aesthetic and intrinsic value humans place on coral reefs (a core ecosystem service they provide) is based on this extreme diversity of colours. However, like many processes on coral reefs, the relationship between colouration and the environment is likely to be impacted by global environmental change. Using a novel community-level measure of fish colouration, as perceived by humans, we explore the potential links between fish community colouration and the environment. We then asked if this relationship is impacted by human-induced environmental disturbances, e.g. mass coral bleaching events, using a community-level dataset spanning 27 years on the Great Barrier Reef. We found that the diversity of colours found within a fish community is directly related to the composition of the local environment. Areas with a higher cover of structurally complex corals contained fish species with more diverse and brighter colourations. Most notably, fish community colouration contracted significantly in the years following the 1998 global coral bleaching event. Fishes with colouration directly appealing to human aesthetics are becoming increasingly rare, with the potential for marked declines in the perceived colour of reef fish communities in the near future. Future reefs may not be the colourful ecosystems we recognize today, representing the loss of a culturally significant ecosystem service.

Integrative Approach Uncovers New Patterns of Ecomorphological Convergence in Slow Arboreal Xenarthrans

Identifying ecomorphological convergence examples is a central focus in evolutionary biology. In xenarthrans, slow arboreality independently arose at least three times, in the two genera of ‘tree sloths’, Bradypus and Choloepus, and the silky anteater, Cyclopes. This specialized locomotor ecology is expectedly reflected by distinctive morpho-functional convergences. Cyclopes, although sharing several ecological features with ‘tree sloths’, do not fully mirror the latter in their outstandingly similar suspensory slow arboreal locomotion. We hypothesized that the morphology of Cyclopes is closer to ‘tree sloths’ than to anteaters, but yet distinct, entailing that slow arboreal xenarthrans evolved through ‘incomplete’ convergence. In a multivariate trait space, slow arboreal xenarthrans are hence expected to depart from their sister taxa evolving toward the same area, but not showing extensive phenotypical overlap, due to the distinct position of Cyclopes. Conversely, a pattern of ‘complete’ convergence (i.e., widely overlapping morphologies) is hypothesized for ‘tree sloths’. Through phylogenetic comparative methods, we quantified humeral and femoral convergence in slow arboreal xenarthrans, including a sample of extant and extinct non-slow arboreal xenarthrans. Through 3D geometric morphometrics, cross-sectional properties (CSP) and trabecular architecture, we integratively quantified external shape, diaphyseal anatomy and internal epiphyseal structure. Several traits converged in slow arboreal xenarthrans, especially those pertaining to CSP. Phylomorphospaces and quantitative convergence analyses substantiated the expected patterns of ‘incomplete’ and ‘complete’ convergence for slow arboreal xenarthrans and ‘tree sloths’, respectively. This work, highlighting previously unidentified convergence patterns, emphasizes the value of an integrative multi-pronged quantitative approach to cope with complex mechanisms underlying ecomorphological convergence.

Widespread convergence in stream fishes

Convergent evolution, the evolution of similar phenotypes among distantly related lineages, is often attributed to adaptation in response to similar selective pressures. Here, we assess the prevalence and degree of convergence in functional traits of stream fishes at the microhabitat scale in five zoogeographical regions across the world. We categorized species by microhabitat, water velocity and preference for substrate complexity and calculated the prevalence of convergence, degree of convergence and functional diversity for each category. Among species occupying similar microhabitats of small, low-gradient streams, 34% had combinations of convergent traits. Convergence occurred at higher rates than expected by chance alone, implying that adaptation to similar environmental conditions often resulted in similar evolutionary patterns along multiple niche dimensions. Two of the microhabitat groupings had significantly convergent species represented in all zoogeographical regions. Fishes occupying microhabitats with high water velocity and low structural complexity generally occupied a restricted morphospace and exhibited greater prevalence and higher degrees of convergence. This suggests that water velocity and habitat structural complexity interact, selecting a restricted distribution of trait distributions and higher degrees of convergence in stream fish assemblages. Furthermore, these results suggest that microhabitat features in streams select for fish trait distributions in a fairly predictable and deterministic manner worldwide.

Insectivory leads to functional convergence in a group of Neotropical rodents

The mandible of vertebrates serves as insertion area for masticatory muscles that originate on the skull, and its functional properties are subject to selective forces related to trophic ecology. The efficiency of masticatory muscles can be measured as mechanical advantage on the mandible, which, in turn, has the property of correlating with bite force and shape. In the present work, we quantify the mechanical advantage of the mandible of akodontine rodents, which present a diverse radiation of insectivorous specialists, to assess their relationship to the estimated bite force and diet. We also tested the degree of morphofunctional convergence in response to insectivory on the group. We found the mechanical advantages to be convergent on insectivorous species, and associated with the estimated bite force, with higher mechanical advantages in species with a stronger bite and short, robust mandibles and lower mechanical advantages in insectivorous species with weaker bites and more elongated, dorso-ventrally compressed mandibles. Insectivorous species of Akodontini are functional specialists for the consumption of live prey and may exploit the resources that shrews, moles and hedgehogs consume elsewhere.

Adding the third dimension to studies of parallel evolution of morphology and function: An exploration based on parapatric lake-stream stickleback

Recent methodological advances have led to a rapid expansion of evolutionary studies employing three-dimensional landmark-based geometric morphometrics (GM). GM methods generally enable researchers to capture and compare complex shape phenotypes, and to quantify their relationship to environmental gradients. However, some recent studies have shown that the common, inexpensive, and relatively rapid two-dimensional GM methods can distort important information and produce misleading results because they cannot capture variation in the depth (Z) dimension. We use micro-CT scanned threespine stickleback (Gasterosteus aculeatus Linnaeus, 1758) from six parapatric lake-stream populations on Vancouver Island, British Columbia, to test whether the loss of the depth dimension in 2D GM studies results in misleading interpretations of parallel evolution. Using joint locations described with 2D or 3D landmarks, we compare results from separate 2D and 3D shape spaces, from a combined 2D-3D shape space, and from estimates of biomechanical function. We show that, although shape is distorted enough in 2D projections to strongly influence the interpretation of morphological parallelism, estimates of biomechanical function are relatively robust to the loss of the Z dimension.

Trophic separation in planktivorous reef fishes: a new role for mucus?

The feeding apparatus directly influences a species' trophic ecology. In fishes, our understanding of feeding modes is largely derived from studies of rigid structures (i.e. bones, teeth, gill rakers). A recently described lip innovation, however, highlighted the role of soft anatomy in enabling specialized feeding modes. In this study, we explore whether similar diversification may also occur in the soft anatomy of the buccal cavity. Using four key anatomical traits to classify 19 species (14 genera) of wrasses, we evaluated the relationship between anatomical specialization of the buccal cavity and diet. Our data revealed a previously undocumented anatomical adaptation in the mouths of fairy wrasses (Cirrhilabrus): the mucosa throughout the buccal cavity (i.e. anterior to the pharynx) is packed with goblet cells, enabling it to secrete large quantities of mucus in this region; a new trait that, until now, had not been documented in wrasses. This disparity reflects diet differences, with mucus secretion found only in planktivorous Cirrhilabrus that feed predominantly on amorphous organic material (potentially gelatinous organisms). This suggests a cryptic mucus-based resource partitioning in planktivorous wrasses.

The Evolutionary Dynamics of Mechanically Complex Systems

Animals use a diverse array of motion to feed, escape predators, and reproduce. Linking morphology, performance, and fitness is a foundational paradigm in organismal biology and evolution. Yet, the influence of mechanical relationships on evolutionary diversity remains unresolved. Here, I focus on the many-to-one mapping of form to function, a widespread, emergent property of many mechanical systems in nature, and discuss how mechanical redundancy influences the tempo and mode of phenotypic evolution. By supplying many possible morphological pathways for functional adaptation, many-to-one mapping can release morphology from selection on performance. Consequently, many-to-one mapping decouples morphological and functional diversification. In fish, for example, parallel morphological evolution is weaker for traits that contribute to mechanically redundant motions, like suction feeding performance, than for systems with one-to-one form-function relationships, like lower jaw lever ratios. As mechanical complexity increases, historical factors play a stronger role in shaping evolutionary trajectories. Many-to-one mapping, however, does not always result in equal freedom of morphological evolution. The kinematics of complex systems can often be reduced to variation in a few traits of high mechanical effect. In various different four-bar linkage systems, for example, mechanical output (kinematic transmission) is highly sensitive to size variation in one or two links, and insensitive to variation in the others. In four-bar linkage systems, faster rates of evolution are biased to traits of high mechanical effect. Mechanical sensitivity also results in stronger parallel evolution-evolutionary transitions in mechanical output are coupled with transition in linkages of high mechanical effect. In other words, the evolutionary dynamics of complex systems can actually approximate that of simpler, one-to-one systems when mechanical sensitivity is strong. When examined in a macroevolutionary framework, the same mechanical system may experience distinct selective pressures in different groups of organisms. For example, performance tradeoffs are stronger for organisms that use the same mechanical structure for more functions. In general, stronger performance tradeoffs result in less phenotypic diversity in the system and, sometimes, a slower rate of evolution. These macroevolutionary trends can contribute to unevenness in functional and lineage diversity across the tree of life. Finally, I discuss how the evolution of mechanical systems informs our understanding of the relative roles of determinism and contingency in evolution.

Intercontinental trends in functional and phylogenetic structure of stream fish assemblages

Understanding of community assembly has been improved by phylogenetic and trait-based approaches, yet there is little consensus regarding the relative importance of alternative mechanisms and few studies have been done at large geographic and phylogenetic scales. Here, we use phylogenetic and trait dispersion approaches to determine the relative contribution of limiting similarity and environmental filtering to community assembly of stream fishes at an intercontinental scale. We sampled stream fishes from five zoogeographic regions. Analysis of traits associated with habitat use, feeding, or both resulted in more occurrences of trait underdispersion than overdispersion regardless of spatial scale or species pool. Our results suggest that environmental filtering and, to a lesser extent, species interactions were important mechanisms of community assembly for fishes inhabiting small, low-gradient streams in all five regions. However, a large proportion of the trait dispersion values were no different from random. This suggests that stochastic factors or opposing assembly mechanisms also influenced stream fish assemblages and their trait dispersion patterns. Local assemblages tended to have lower functional diversity in microhabitats with high water velocity, shallow water depth, and homogeneous substrates lacking structural complexity, lending support for the stress-dominance hypothesis. A high prevalence of functional underdispersion coupled with phylogenetic underdispersion could reflect phylogenetic niche conservatism and/or stabilizing selection. These findings imply that environmental filtering of stream fish assemblages is not only deterministic, but also influences assemblage structure in a fairly consistent manner worldwide.

Functional performance of turtle humerus shape across an ecological adaptive landscape

The concept of the adaptive landscape has been invaluable to evolutionary biologists for visualizing the dynamics of selection and adaptation, and is increasingly being used to study morpho-functional data. Here, we construct adaptive landscapes to explore functional trade-offs associated with variation in humerus morphology among turtles adapted to three different locomotor environments: marine, semiaquatic, and terrestrial. Humerus shape from 40 species of cryptodire turtles was quantified using a pseudolandmark approach. Hypothetical shapes were extracted in a grid across morphospace and four functional traits (strength, stride length, mechanical advantage, and hydrodynamics) measured on those shapes. Quantitative trait modeling was used to construct adaptive landscapes that optimize the functional traits for each of the three locomotor ecologies. Our data show that turtles living in different environments have statistically different humeral shapes. The optimum adaptive landscape for each ecology is defined by a different combination of performance trade-offs, with turtle species clustering around their respective adaptive peak. Further, species adhere to pareto fronts between marine-semiaquatic and semiaquatic-terrestrial optima, but not between marine-terrestrial. Our study demonstrates the utility of adaptive landscapes in informing the link between form, function, and ecological adaptation, and establishes a framework for reconstructing turtle ecological evolution using isolated humeri from the fossil record.

Pleiotropic jaw morphology links the evolution of mechanical modularity and functional feeding convergence in Lake Malawi cichlids

Complexity in how mechanistic variation translates into ecological novelty could be critical to organismal diversification. For instance, when multiple distinct morphologies can generate the same mechanical or functional phenotype, this could mitigate trade-offs and/or provide alternative ways to meet the same ecological challenge. To investigate how this type of complexity shapes diversity in a classic adaptive radiation, we tested several evolutionary consequences of the anterior jaw four-bar linkage for Lake Malawi cichlid trophic diversification. Using a novel phylogenetic framework, we demonstrated that different mechanical outputs of the same four jaw elements are evolutionarily associated with both jaw protrusion distance and jaw protrusion angle. However, these two functional aspects of jaw protrusion have evolved independently. Additionally, although four-bar morphology showed little evidence for attraction to optima, there was substantial evidence of adaptive peaks for emergent four-bar linkage mechanics and jaw protrusion abilities among Malawi feeding guilds. Finally, we highlighted a clear case of two cichlid species that have -independently evolved to graze algae in less than 2 Myr and have converged on similar jaw protrusion abilities as well as four-bar linkage mechanics, but have evolved these similarities via non-convergent four-bar morphologies.

Finding the weakest link: mechanical sensitivity in a fish cranial linkage system

Understanding the physical mechanics behind morphological systems can offer insights into their evolution. Recent work on linkage systems in fish and crustaceans has suggested that the evolution of such systems may depend on mechanical sensitivity, where geometrical changes to different parts of a biomechanical system have variable influence on mechanical outputs. While examined at the evolutionary level, no study has directly explored this idea at the level of the mechanism. We analyse the mechanical sensitivity of a fish cranial linkage to identify the influence of linkage geometry on the kinematic transmission (KT) of the suspensorium, hyoid and lower jaw. Specifically, we answer two questions about the sensitivity of this linkage system: (i) What changes in linkage geometry affect one KT while keeping the other KTs constant? (ii) Which geometry changes result in the largest and smallest changes to KT? Our results show that there are ways to alter the morphology that change each KT individually, and that there are multiple ways to alter a single link that have variable influence on KT. These results provide insight into the morphological evolution of the fish skull and highlight which structural features in the system may have more freedom to evolve than others.

Strong biomechanical relationships bias the tempo and mode of morphological evolution

The influence of biomechanics on the tempo and mode of morphological evolution is unresolved, yet is fundamental to organismal diversification. Across multiple four-bar linkage systems in animals, we discovered that rapid morphological evolution (tempo) is associated with mechanical sensitivity (strong correlation between a mechanical system's output and one or more of its components). Mechanical sensitivity is explained by size: the smallest link(s) are disproportionately affected by length changes and most strongly influence mechanical output. Rate of evolutionary change (tempo) is greatest in the smallest links and trait shifts across phylogeny (mode) occur exclusively via the influential, small links. Our findings illuminate the paradigms of many-to-one mapping, mechanical sensitivity, and constraints: tempo and mode are dominated by strong correlations that exemplify mechanical sensitivity, even in linkage systems known for exhibiting many-to-one mapping. Amidst myriad influences, mechanical sensitivity imparts distinct, predictable footprints on morphological diversity.

Decoupled diversification dynamics of feeding morphology following a major functional innovation in marine butterflyfishes

The diversity of fishes on coral reefs is influenced by the evolution of feeding innovations. For instance, the evolution of an intramandibular jaw joint has aided shifts to corallivory in Chaetodon butterflyfishes following their Miocene colonization of coral reefs. Today, over half of all Chaetodon species consume coral, easily the largest concentration of corallivores in any reef fish family. In contrast with Chaetodon, other chaetodontids, including the long-jawed bannerfishes, remain less intimately associated with coral and mainly consume other invertebrate prey. Here, we test (i) if intramandibular joint (IMJ) evolution in Chaetodon has accelerated feeding morphological diversification, and (ii) if cranial and post-cranial traits were affected similarly. We measured 19 cranial functional morphological traits, gut length and body elongation for 33 Indo-Pacific species. Comparisons of Brownian motion rate parameters revealed that cranial diversification was about four times slower in Chaetodon butterflyfishes with the IMJ than in other chaetodontids. However, the rate of gut length evolution was significantly faster in Chaetodon, with no group-differences for body elongation. The contrasting patterns of cranial and post-cranial morphological evolution stress the importance of comprehensive datasets in ecomorphology. The IMJ appears to enhance coral feeding ability in Chaetodon and represents a design breakthrough that facilitates this trophic strategy. Meanwhile, variation in gut anatomy probably reflects diversity in how coral tissues are procured and assimilated. Bannerfishes, by contrast, retain a relatively unspecialized gut for processing invertebrate prey, but have evolved some of the most extreme cranial mechanical innovations among bony fishes for procuring elusive prey.

Mechanical sensitivity and the dynamics of evolutionary rate shifts in biomechanical systems

The influence of biophysical relationships on rates of morphological evolution is a cornerstone of evolutionary theory. Mechanical sensitivity-the correlation strength between mechanical output and the system's underlying morphological components-is thought to impact the evolutionary dynamics of form-function relationships, yet has rarely been examined. Here, we compare the evolutionary rates of the mechanical components of the four-bar linkage system in the raptorial appendage of mantis shrimp (Order Stomatopoda). This system's mechanical output (kinematic transmission (KT)) is highly sensitive to variation in its output link, and less sensitive to its input and coupler links. We found that differential mechanical sensitivity is associated with variation in evolutionary rate: KT and the output link exhibit faster rates of evolution than the input and coupler links to which KT is less sensitive. Furthermore, for KT and, to a lesser extent, the output link, rates of evolution were faster in 'spearing' stomatopods than 'smashers', indicating that mechanical sensitivity may influence trait-dependent diversification. Our results suggest that mechanical sensitivity can impact morphological evolution and guide the process of phenotypic diversification. The connection between mechanical sensitivity and evolutionary rates provides a window into the interaction between physical rules and the evolutionary dynamics of morphological diversification.

Many-to-one form-to-function mapping weakens parallel morphological evolution

Evolutionary ecologists aim to explain and predict evolutionary change under different selective regimes. Theory suggests that such evolutionary prediction should be more difficult for biomechanical systems in which different trait combinations generate the same functional output: "many-to-one mapping." Many-to-one mapping of phenotype to function enables multiple morphological solutions to meet the same adaptive challenges. Therefore, many-to-one mapping should undermine parallel morphological evolution, and hence evolutionary predictability, even when selection pressures are shared among populations. Studying 16 replicate pairs of lake- and stream-adapted threespine stickleback (Gasterosteus aculeatus), we quantified three parts of the teleost feeding apparatus and used biomechanical models to calculate their expected functional outputs. The three feeding structures differed in their form-to-function relationship from one-to-one (lower jaw lever ratio) to increasingly many-to-one (buccal suction index, opercular 4-bar linkage). We tested for (1) weaker linear correlations between phenotype and calculated function, and (2) less parallel evolution across lake-stream pairs, in the many-to-one systems relative to the one-to-one system. We confirm both predictions, thus supporting the theoretical expectation that increasing many-to-one mapping undermines parallel evolution. Therefore, sole consideration of morphological variation within and among populations might not serve as a proxy for functional variation when multiple adaptive trait combinations exist.

Morphospaces of functionally analogous traits show ecological separation between birds and pterosaurs

Birds originated and radiated in the presence of another group of flying vertebrates, the pterosaurs. Opinion is divided as to whether birds competitively displaced pterosaurs from small-body size niches or whether the two groups coexisted with little competition. Previous studies of Mesozoic birds and pterosaurs compared measurements of homologous limb bones to test these hypotheses. However, these characters probably reflect differing ancestries rather than ecologies. Here, competition and ecological separation were tested for using multivariate analyses of functionally equivalent morphological characters. As well as using characters from the fore- and hindlimbs, these analyses also included measurements of the lower jaw. The results of this study indicate that pterosaurs had relatively longer jaws, shorter metatarsals and shorter brachial regions compared with birds of similar size. Contrary to the results of previous studies, the distal wing was not important for separating the two clades in morphospace owing to the inclusion of the primary feathers in this unit. The differences found here indicate ecological separation based on differences in size, locomotory features and feeding adaptations. Thus, instead of one group displacing the other, birds and pterosaurs appear to have adopted distinctive ecological strategies throughout their period of coexistence.

Common evolutionary trends underlie the four-bar linkage systems of sunfish and mantis shrimp

Comparative biomechanics offers an opportunity to explore the evolution of disparate biological systems that share common underlying mechanics. Four-bar linkage modeling has been applied to various biological systems such as fish jaws and crustacean appendages to explore the relationship between biomechanics and evolutionary diversification. Mechanical sensitivity states that the functional output of a mechanical system will show differential sensitivity to changes in specific morphological components. We document similar patterns of mechanical sensitivity in two disparate four-bar systems from different phyla: the opercular four-bar system in centrarchid fishes and the raptorial appendage of stomatopods. We built dynamic linkage models of 19 centrarchid and 36 stomatopod species and used phylogenetic generalized least squares regression (PGLS) to compare evolutionary shifts in linkage morphology and mechanical outputs derived from the models. In both systems, the kinematics of the four-bar mechanism show significant evolutionary correlation with the output link, while travel distance of the output arm is correlated with the coupler link. This common evolutionary pattern seen in both fish and crustacean taxa is a potential consequence of the mechanical principles underlying four-bar systems. Our results illustrate the potential influence of physical principles on morphological evolution across biological systems with different structures, behaviors, and ecologies.

Form-function relationships in dragonfly mandibles under an evolutionary perspective

Functional requirements may constrain phenotypic diversification or foster it. For insect mouthparts, the quantification of the relationship between shape and function in an evolutionary framework remained largely unexplored. Here, the question of a functional influence on phenotypic diversification for dragonfly mandibles is assessed with a large-scale biomechanical analysis covering nearly all anisopteran families, using finite element analysis in combination with geometric morphometrics. A constraining effect of phylogeny could be found for shape, the mandibular mechanical advantage (MA), and certain mechanical joint parameters, while stresses and strains, the majority of joint parameters and size are influenced by shared ancestry. Furthermore, joint mechanics are correlated with neither strain nor mandibular MA and size effects have virtually play no role for shape or mechanical variation. The presence of mandibular strengthening ridges shows no phylogenetic signal except for one ridge peculiar to Libelluloidea, and ridge presence is also not correlated with each other. The results suggest that functional traits are more variable at this taxonomic level and that they are not influenced by shared ancestry. At the same time, the results contradict the widespread idea that mandibular morphology mainly reflects functional demands at least at this taxonomic level. The varying functional factors rather lead to the same mandibular performance as expressed by the MA, which suggests a many-to-one mapping of the investigated parameters onto the same narrow mandibular performance space.

Rare ecomorphological convergence on a complex adaptive landscape: Body size and diet mediate evolution of jaw shape in squirrels (Sciuridae)

Convergence is widely regarded as compelling evidence for adaptation, often being portrayed as evidence that phenotypic outcomes are predictable from ecology, overriding contingencies of history. However, repeated outcomes may be very rare unless adaptive landscapes are simple, structured by strong ecological and functional constraints. One such constraint may be a limitation on body size because performance often scales with size, allowing species to adapt to challenging functions by modifying only size. When size is constrained, species might adapt by changing shape; convergent shapes may therefore be common when size is limiting and functions are challenging. We examine the roles of size and diet as determinants of jaw shape in Sciuridae. As expected, size and diet have significant interdependent effects on jaw shape and ecomorphological convergence is rare, typically involving demanding diets and limiting sizes. More surprising is morphological without ecological convergence, which is equally common between and within dietary classes. Those cases, like rare ecomorphological convergence, may be consequences of evolving on an adaptive landscape shaped by many-to-many relationships between ecology and function, many-to-one relationships between form and performance, and one-to-many relationships between functionally versatile morphologies and ecology. On complex adaptive landscapes, ecological selection can yield different outcomes.

Mechanical Transgressive Segregation and the Rapid Origin of Trophic Novelty

Hybrid phenotypes are often intermediate between those of parental species. However, hybridization can generate novel phenotypes when traits are complex. For instance, even when the morphologies of individual musculo-skeletal components do not segregate outside the parental range in hybrid offspring, complex functional systems can exhibit emergent phenotypes whose mechanics exceed the parental values. To determine if transgression in mechanics could facilitate divergence during an adaptive radiation, we examined three functional systems in the trophic apparatus of Lake Malawi cichlid fishes. We conducted a simulation study of hybridization between species pairs whose morphology for three functional systems was empirically measured, to determine how the evolutionary divergence of parental species influences the frequency that hybridization could produce mechanics that transgress the parental range. Our simulations suggest that the complex mechanical systems of the cichlid trophic apparatus commonly exhibit greater transgression between more recently diverged cichlid species. Because (1) all three mechanical systems produce hybrids with transgressive mechanics in Lake Malawi cichlids, (2) hybridization is common, and (3) single hybrid crosses often recapitulate a substantial diversity of mechanics, we conclude that mechanical transgressive segregation could play an important role in the rapid accumulation of phenotypic variation in adaptive radiations.

Musculoskeletal modelling under an evolutionary perspective: deciphering the role of single muscle regions in closely related insects

Insects show a remarkable diversity of muscle configurations, yet the factors leading to this functional diversity are poorly understood. Here, we use musculoskeletal modelling to understand the spatio-temporal activity of an insect muscle in several dragonfly species and to reveal potential mechanical factors leading to a particular muscle configuration. Bite characteristics potentially show systematic signal, but absolute bite force is not correlated with size. Muscle configuration and inverse dynamics show that the wider relative area of muscle attachment and the higher activity of subapical muscle groups are responsible for this high bite force. This wider attachment area is, however, not an evolutionary trend within dragonflies. Our inverse dynamic data, furthermore, show that maximum bite forces most probably do not reflect maximal muscle force production capability in all studied species. The thin head capsule and the attachment areas of muscles most probably limit the maximum force output of the mandibular muscles.

How much does nasal cavity morphology matter? Patterns and rates of olfactory airflow in phyllostomid bats

The morphology of the nasal cavity in mammals with a good sense of smell includes features that are thought to improve olfactory airflow, such as a dorsal conduit that delivers odours quickly to the olfactory mucosa, an enlarged olfactory recess at the back of the airway, and a clear separation of the olfactory and respiratory regions of the nose. The link between these features and having a good sense of smell has been established by functional examinations of a handful of distantly related mammalian species. In this paper, we provide the first detailed examination of olfactory airflow in a group of closely related species that nevertheless vary in their sense of smell. We study six species of phyllostomid bats that have different airway morphologies and foraging ecologies, which have been linked to differences in olfactory ability or reliance. We hypothesize that differences in morphology correlate with differences in the patterns and rates of airflow, which in turn are consistent with dietary differences. To compare species, we make qualitative and quantitative comparisons of the patterns and rates of airflow through the olfactory region during both inhalation and exhalation across the six species. Contrary to our expectations, we find no clear differences among species in either the patterns of airflow through the airway or in rates of flow through the olfactory region. By and large, olfactory airflow seems to be conserved across species, suggesting that morphological differences appear to be driven by other mechanical demands on the snout, such as breathing and feeding. Olfactory ability may depend on other aspects of the system, such as the neurobiological processing of odours that work within the existing morphology imposed by other functional demands on the nasal cavity.

Linking suckling biomechanics to the development of the palate

Skulls are amongst the most informative documents of evolutionary history but a complex geometry, coupled with composite material properties and complicated biomechanics, have made it particularly challenging to identify mechanical principles guiding the skull’s morphogenesis. Despite this challenge, multiple lines of evidence, for example the relationship between masticatory function and the evolution of jaw shape, nonetheless suggest that mechanobiology plays a major role in skull morphogenesis. To begin to tackle this persistent challenge, cellular, molecular and tissue-level analyses of the developing mouse palate were coupled with finite element modeling to demonstrate that patterns of strain created by mammalian-specific oral behaviors produce complementary patterns of chondrogenic gene expression in an initially homogeneous population of cranial neural crest cells. Neural crest cells change from an osteogenic to a chondrogenic fate, leading to the materialization of cartilaginous growth plate-like structures in the palatal midline. These growth plates contribute to lateral expansion of the head but are transient structures; when the strain patterns associated with suckling dissipate at weaning, the growth plates disappear and the palate ossifies. Thus, mechanical cues such as strain appear to co-regulate cell fate specification and ultimately, help drive large-scale morphogenetic changes in head shape.

Mechanical sensitivity reveals evolutionary dynamics of mechanical systems

A classic question in evolutionary biology is how form-function relationships promote or limit diversification. Mechanical metrics, such as kinematic transmission (KT) in linkage systems, are useful tools for examining the evolution of form and function in a comparative context. The convergence of disparate systems on equivalent metric values (mechanical equivalence) has been highlighted as a source of potential morphological diversity under the assumption that morphology can evolve with minimal impact on function. However, this assumption does not account for mechanical sensitivity-the sensitivity of the metric to morphological changes in individual components of a structure. We examined the diversification of a four-bar linkage system in mantis shrimp (Stomatopoda), and found evidence for both mechanical equivalence and differential mechanical sensitivity. KT exhibited variable correlations with individual linkage components, highlighting the components that influence KT evolution, and the components that are free to evolve independently from KT and thereby contribute to the observed pattern of mechanical equivalence. Determining the mechanical sensitivity in a system leads to a deeper understanding of both functional convergence and morphological diversification. This study illustrates the importance of multi-level analyses in delineating the factors that limit and promote diversification in form-function systems.

A morphospace for reef fishes: elongation is the dominant axis of body shape evolution

Tropical reef fishes are widely regarded as being perhaps the most morphologically diverse vertebrate assemblage on earth, yet much remains to be discovered about the scope and patterns of this diversity. We created a morphospace of 2,939 species spanning 56 families of tropical Indo-Pacific reef fishes and established the primary axes of body shape variation, the phylogenetic consistency of these patterns, and whether dominant patterns of shape change can be accomplished by diverse underlying changes. Principal component analysis showed a major axis of shape variation that contrasts deep-bodied species with slender, elongate forms. Furthermore, using custom methods to compare the elongation vector (axis that maximizes elongation deformation) and the main vector of shape variation (first principal component) for each family in the morphospace, we showed that two thirds of the families diversify along an axis of body elongation. Finally, a comparative analysis using a principal coordinate analysis based on the angles among first principal component vectors of each family shape showed that families accomplish changes in elongation with a wide range of underlying modifications. Some groups such as Pomacentridae and Lethrinidae undergo decreases in body depth with proportional increases in all body regions, while other families show disproportionate changes in the length of the head (e.g., Labridae), the trunk or caudal region in all combinations (e.g., Pempheridae and Pinguipedidae). In conclusion, we found that evolutionary changes in body shape along an axis of elongation dominates diversification in reef fishes. Changes in shape on this axis are thought to have immediate implications for swimming performance, defense from gape limited predators, suction feeding performance and access to some highly specialized habitats. The morphological modifications that underlie changes in elongation are highly diverse, suggesting a role for a range of developmental processes and functional consequences.

Suction among pickers: jaw mechanics, dietary breadth and feeding behaviour in beach-spawning Leuresthes spp. compared with their relatives

Jaw mechanics and dietary breadth in California grunion Leuresthes tenuis and Gulf grunion Leuresthes sardina were compared with three other members of the tribe Atherinopsini to test whether these two species have evolved a novel jaw protrusion that might be associated with feeding narrowly on abundant prey near spawning beaches. Quantitative comparison of cleared-and-stained specimens of five members of the atherinopsine clade showed that, compared with false grunion Colpichthys regis, topsmelt Atherinops affinis and jacksmelt Atherinopsis californiensis, L. tenuis and L. sardina have longer, more downwardly directed premaxillary protrusion, expanded dentary and premaxillary bones, greater lower jaw rotation and larger premaxilla-vomer separation. Leuresthes tenuis showed greater differences than L. sardina in these features. Comparison of the gut contents of L. tenuis and A. affinis with zooplankton samples collected simultaneously with these fishes in the water column within 1 km of shore showed that, as predicted, L. tenuis fed predominantly on mysid crustaceans and had a narrower diet than A. affinis. High-speed video analysis showed that L. tenuis exhibits a mean time to maximum jaw protrusion c. 2.5 times shorter than that of A. affinis. The grunion sister species, especially L. tenuis, have evolved suction feeding that may allow efficient feeding on common, evasive prey near spawning sites. The morphological traits seen in both species of Leuresthes signify a marked difference from their closest relatives in prey capture and suggest a type of jaw protrusion not yet seen in cyprinodontiforms or perciforms.

Morphology and efficiency of a specialized foraging behavior, sediment sifting, in neotropical cichlid fishes

Understanding of relationships between morphology and ecological performance can help to reveal how natural selection drives biological diversification. We investigate relationships between feeding behavior, foraging performance and morphology within a diverse group of teleost fishes, and examine the extent to which associations can be explained by evolutionary relatedness. Morphological adaptation associated with sediment sifting was examined using a phylogenetic linear discriminant analysis on a set of ecomorphological traits from 27 species of Neotropical cichlids. For most sifting taxa, feeding behavior could be effectively predicted by a linear discriminant function of ecomorphology across multiple clades of sediment sifters, and this pattern could not be explained by shared evolutionary history alone. Additionally, we tested foraging efficiency in seven Neotropical cichlid species, five of which are specialized benthic feeders with differing head morphology. Efficiency was evaluated based on the degree to which invertebrate prey could be retrieved at different depths of sediment. Feeding performance was compared both with respect to feeding mode and species using a phylogenetic ANCOVA, with substrate depth as a covariate. Benthic foraging performance was constant across sediment depths in non-sifters but declined with depth in sifters. The non-sifting Hypsophrys used sweeping motions of the body and fins to excavate large pits to uncover prey; this tactic was more efficient for consuming deeply buried invertebrates than observed among sediment sifters. Findings indicate that similar feeding performance among sediment-sifting cichlids extracting invertebrate prey from shallow sediment layers reflects constraints associated with functional morphology and, to a lesser extent, phylogeny.

Morphological and biomechanical disparity of crocodile-line archosaurs following the end-Triassic extinction

Mesozoic crurotarsans exhibited diverse morphologies and feeding modes, representing considerable ecological diversity, yet macroevolutionary patterns remain unexplored. Here, we use a unique combination of morphological and biomechanical disparity metrics to quantify the ecological diversity and trophic radiations of Mesozoic crurotarsans, using the mandible as a morpho-functional proxy. We recover three major trends. First, the diverse assemblage of Late Triassic crurotarsans was morphologically and biomechanically disparate, implying high levels of ecological variation; but, following the end-Triassic extinction, disparity declined. Second, the Jurassic radiation of marine thalattosuchians resulted in very low morphological disparity but moderate variation in jaw biomechanics, highlighting a hydrodynamic constraint on mandibular form. Third, during the Cretaceous terrestrial radiations of neosuchians and notosuchians, mandibular morphological variation increased considerably. By the Late Cretaceous, crocodylomorphs evolved a range of morphologies equalling Late Triassic crurotarsans. By contrast, biomechanical disparity in the Cretaceous did not increase, essentially decoupling from morphology. This enigmatic result could be attributed to biomechanical evolution in other anatomical regions (e.g. cranium, dentition or postcranium), possibly releasing the mandible from selective pressures. Overall, our analyses reveal a complex relationship between morphological and biomechanical disparity in Mesozoic crurotarsans that culminated in specialized feeding ecologies and associated lifestyles.

Testing for ancient adaptive radiations in neotropical cichlid fishes

Most contemporary studies of adaptive radiation focus on relatively recent and geographically restricted clades. It is less clear whether diversification of ancient clades spanning entire continents is consistent with adaptive radiation. We used novel fossil calibrations to generate a chronogram of Neotropical cichlid fishes and to test whether patterns of lineage and morphological diversification are congruent with hypothesized adaptive radiations in South and Central America. We found that diversification in the Neotropical cichlid clade and the highly diverse tribe Geophagini was consistent with diversity-dependent, early bursts of divergence followed by decreased rates of lineage accumulation. South American Geophagini underwent early rapid differentiation in body shape, expanding into novel morphological space characterized by elongate-bodied predators. Divergence in head shape attributes associated with trophic specialization evolved under strong adaptive constraints in all Neotropical cichlid clades. The South American Cichlasomatini followed patterns consistent with constant rates of morphological divergence. Although morphological diversification in South American Heroini was limited, Eocene invasion of Central American habitats was followed by convergent diversification mirroring variation observed in Geophagini. Diversification in Neotropical cichlids was influenced by the early adaptive radiation of Geophagini, which potentially limited differentiation in other cichlid clades.

The genetic basis of a complex functional system

The relationship between form and function can have profound effects on evolutionary dynamics and such effects may differ for simple versus complex systems. In particular, functions produced by multiple structural configurations (many-to-one mapping, MTOM) may dampen constituent trade-offs and promote diversification. Unfortunately, we lack information about the genetic architecture of MTOM functional systems. The skulls of teleost fishes contain both simple (lower jaw levers) as well as more complex (jaws modeled as 4-bar linkages) functional systems within the same craniofacial unit. We examined the mapping of form to function and the genetic basis of these systems by identifying quantitative trait loci (QTL) in hybrids of two Lake Malawi cichlid species. Hybrid individuals exhibited novelty (transgressive segregation) in morphological components and function of the simple and complex jaw systems. Functional novelty was proportional to the prevalence of extreme morphologies in the simple levers; by contrast, recombination of parental morphologies produced transgression in the MTOM 4-bar linkage. We found multiple loci of moderate effect and epistasis controlling jaw phenotypes in both the simple and complex systems, with less phenotypic variance explained by QTL for the 4-bar. Genetic linkage between components of the simple and complex systems partly explains phenotypic correlations and may constrain functional evolution.

Evolution of high trophic diversity based on limited functional disparity in the feeding apparatus of marine angelfishes (f. Pomacanthidae)

The use of biting to obtain food items attached to the substratum is an ecologically widespread and important mode of feeding among aquatic vertebrates, which rarely has been studied. We did the first evolutionary analyses of morphology and motion kinematics of the feeding apparatus in Indo-Pacific members of an iconic family of biters, the marine angelfishes (f. Pomacanthidae). We found clear interspecific differences in gut morphology that clearly reflected a wide range of trophic niches. In contrast, feeding apparatus morphology appeared to be conserved. A few unusual structural innovations enabled angelfishes to protrude their jaws, close them in the protruded state, and tear food items from the substratum at a high velocity. Only one clade, the speciose pygmy angelfishes, showed functional departure from the generalized and clade-defining grab-and-tearing feeding pattern. By comparing the feeding kinematics of angelfishes with wrasses and parrotfishes (f. Labridae) we showed that grab-and-tearing is based on low kinematics disparity. Regardless of its restricted disparity, the grab-and-tearing feeding apparatus has enabled angelfishes to negotiate ecological thresholds: Given their widely different body sizes, angelfishes can access many structurally complex benthic surfaces that other biters likely are unable to exploit. From these surfaces, angelfishes can dislodge sturdy food items from their tough attachments. Angelfishes thus provide an intriguing example of a successful group that appears to have evolved considerable trophic diversity based on an unusual yet conserved feeding apparatus configuration that is characterized by limited functional disparity.