Plastics, the environment and human health: current consensus and future trends

Decoding the molecular concerto: Toxicotranscriptomic evaluation of microplastic and nanoplastic impacts on aquatic organisms

The pervasive and steadily increasing presence of microplastics/nanoplastics (MPs/NPs) in aquatic environments has raised significant concerns regarding their potential adverse effects on aquatic organisms and their integration into trophic dynamics. This emerging issue has garnered the attention of (eco)toxicologists, promoting the utilization of toxicotranscriptomics to unravel the responses of aquatic organisms not only to MPs/NPs but also to a wide spectrum of environmental pollutants. This review aims to systematically explore the broad repertoire of predicted molecular responses by aquatic organisms, providing valuable intuitions into complex interactions between plastic pollutants and aquatic biota. By synthesizing the latest literature, present analysis sheds light on transcriptomic signatures like gene expression, interconnected pathways and overall molecular mechanisms influenced by various plasticizers. Harmful effects of these contaminants on key genes/protein transcripts associated with crucial pathways lead to abnormal immune response, metabolic response, neural response, apoptosis and DNA damage, growth, development, reproductive abnormalities, detoxification, and oxidative stress in aquatic organisms. However, unique challenge lies in enhancing the fingerprint of MPs/NPs, presenting complicated enigma that requires decoding their specific impact at molecular levels. The exploration endeavors, not only to consolidate existing knowledge, but also to identify critical gaps in understanding, push forward the frontiers of knowledge about transcriptomic signatures of plastic contaminants. Moreover, this appraisal emphasizes the imperative to monitor and mitigate the contamination of commercially important aquatic species by MPs/NPs, highlighting the pivotal role that regulatory frameworks must play in protecting all aquatic ecosystems. This commitment aligns with the broader goal of ensuring the sustainability of aquatic resources and the resilience of ecosystems facing the growing threat of plastic pollutants.

Effects of microplastics on key reproductive and biochemical endpoints of the freshwater microcrustacean Daphnia magna

Human activities have directly impacted the environment, causing significant ecological imbalances. From the different contaminants resulting from human activities, plastics are of major environmental concern. Due to their high use and consequent discharge, plastics tend to accumulate in aquatic environments. There, plastics can form smaller particles (microplastics, MPs), due to fragmentation and weathering, which are more prone to interact with aquatic organisms and cause deleterious effects, including at the basis of different food webs. This study assessed the effects of two microplastics (polyethylene terephthalate, PET; and polypropylene, PP; both of common domestic use) in the freshwater cladoceran species Daphnia magna. Toxic effects were assessed by measuring reproductive traits (first brood and total number of offspring), and activities of biomarkers involved in xenobiotic metabolism (phase I: cytochrome P-450 isoenzymes CYP1A1, 1A2 and 3A4; phase II/conjugation: glutathione S-transferases; and antioxidant defense (catalase)). Both MPs showed a potential to significantly reduce reproductive parameters in D. magna. Furthermore, PET caused a significant increase in some isoenzymes of CYP450 in acutely exposed organisms, but this effect was not observed in chronically exposed animals. Similarly, the activity of the antioxidant defense (CAT) was significantly increased in acutely exposed animals, but not in chronically exposed organisms. This pattern of effects suggests a possible mechanism of long-term adaptation to the presence of the tested MPs. In conclusion, the herein tested MPs have shown the potential to induce deleterious effects on D. magna mainly observed in terms of the reproductive outcomes. Changes at the biochemical level seems transient and are not likely to occur in long term, environmentally exposed crustaceans.

Point-source tracking of microplastics in sewerage systems. Finding the culprit

Prior microplastic (MP) research has focused more on the efficiency of removal techniques within wastewater treatment plants (WWTP), with comparatively less emphasis placed on identifying and understanding the sources of MPs. In this study, the presence of MP in wastewater from various sources and their associated WWTPs was investigated. Utilising focal plane array micro Fourier Transform Infrared spectroscopy (FPA-μFTIR), the chemical composition, size distribution, and mass of MPs were quantified. Notably, wastewater generated from an industrial laundry facility exhibited the highest MP concentration of 6900 counts L-1 or 716 μg L-1. Domestic sewage contained MP levels (1534 counts L-1; 158 μg L-1) similar to those at the WWTPs (1640 counts L-1; 114 μg L-1). Polyester was identified as a significant component in most of the sources, predominantly originating from the shedding of fibres during textile washing. Additionally, a post-processing software was employed to compare two methods for fibre identification: aspect ratio and elongation ratio. These findings underscore the potential environmental impact of domestic activities and laundry washing on wastewater MP content.

Contemporary Concise Review 2023: Environmental and occupational lung diseases

Air pollutants have various effects on human health in environmental and occupational settings. Air pollutants can be a risk factor for incidence, exacerbation/aggravation and death due to various lung diseases, including asthma, chronic obstructive pulmonary disease (COPD), hypersensitivity pneumonitis or pneumonia (HP), pulmonary fibrosis such as pneumoconiosis and malignant respiratory diseases such as lung cancer and malignant pleural mesothelioma. Environmental and occupational respiratory diseases are crucial clinical and social issues worldwide, although the burden of respiratory disease due to environmental and occupational causes varies depending on country/region, demographic variables, geographical location, industrial structure and socioeconomic situation. The correct recognition of environmental and occupational lung diseases and taking appropriate measures are essential to their effective prevention.

Exposure to di-2-ethylhexyl phthalate and breast neoplasm incidence: A cohort study

BACKGROUND

Phthalates are ubiquitous environmental endocrine disruptors. As the predominant phthalate, di-2-ethylhexyl phthalate (DEHP) has been considered possibly carcinogenic to humans but large-scale longitudinal evidence is needed to further clarify its carcinogenicity.

OBJECTIVES

To examine the association between DEHP exposure and incidence of breast malignant neoplasm, carcinoma in situ and benign neoplasm.

METHODS

A total of 273,295 women from UK Biobank cohort were followed up for a median of 13.5 years. Disease information was collected from National Health Service Cancer Registry and National Death Index. Baseline and yearly-average level of DEHP exposure were estimated for each individual by linking chemical monitoring record of European Environment Agency with home address of the participants by Kriging interpolation model. Cox proportional hazard model was employed to estimate the association between DEHP exposure and breast neoplasms.

RESULTS

The median (IQR) of baseline and yearly-average DEHP concentration were 8000.25 (interquartile range: 6657.85-11,948.83) and 8000.25 (interquartile range: 1819.93-11,359.55) μg/L. The highest quartile of baseline DEHP was associated with 1.11 fold risk of carcinoma in situ (95 % CI, 1.00, 1.23, p < 0.001) and 1.27 fold risk of benign neoplasm (95 % CI, 1.05, 1.54, p < 0.001). As for yearly-average exposure, each quartile of DEHP was positively associated with higher risk of malignant neoplasm (HR, 1.05; 95 % CI, 1.03, 1.07, p < 0.001), carcinoma in situ (HR, 1.08; 95 % CI, 1.04, 1.11, p < 0.001) and benign neoplasm (HR, 1.13; 95 % CI, 1.07, 1.20, p < 0.001). Stratification analysis showed no significant modification effects on the DEHP-neoplasm relationship by menopausal status or ethnicity but a suggestive higher risk in younger women and those who underwent oral contraceptive pill therapy. In sensitivity analysis, the associations remained when excluding the cases diagnosed within 2 years post baseline.

CONCLUSIONS

Real-world level of DEHP exposure was associated with higher risk of breast neoplasms. Because of the health risks associated with DEHP, its release to the environment should be managed.

Nano/Micro-Plastic, an invisible threat getting into the Brain

Due to weather and working/operational conditions, plastic degradation produces toxic and non-biodegradable nano and microplastics (N/M-Ps, ranging from 10 nm to 5 mm), and over time these N/M-Ps have integrated with the human cycle through ingestion and inhalation. These N/M-Ps, as serious emerging pollutants, are causing considerable adverse health issues due to up-taken by the cells, tissue, and organs, including the brain. It has been proven that N/M-Ps can cross the blood-brain barrier (via olfactory and blood vessels) and affect the secretion of neuroinflammatory (cytokine and chemokine), transporters, and receptor markers. Neurotoxicity, neuroinflammation, and brain injury, which may result in such scenarios are a serious concern and may cause brain disorders. However, the related pathways and pathogenesis are not well-explored but are the focus of upcoming emerging research. Therefore, as a focus of this editorial, well-organized multidisciplinary research is required to explore associated pathways and pathogenesis, leading to brain mapping and nano-enabled therapeutics in acute and chronic N/M-P exposure.

Fate and behaviour of Microplastics (> 25µm) within the water distribution network, from water treatment works to service reservoirs and customer taps

Water treatment works have previously shown high efficiency in removing microplastics > 25 µm from raw source water. However, what is less well known is the extent to which microplastics of this size class are generated or lost within the water distribution network, particularly whether there is a greater presence in the customer tap than in the water treatment works outlet. This study focused on the presence of 21 different types of synthetic polymer particles with sizes larger than 25 µm examined through multiple rounds of sampling at outlets of water treatment works (WTW), service reservoirs (SR), and customer taps (CT) managed by seven different water companies in Britain. Nineteen different types of polymers were detected; their signature and concentration varied based on the round of sampling, the location within the water supply network, and the water company responsible for managing the supply. Among the polymers examined, polyamide (PA), polyethene terephthalate (PET), polypropylene (PP), and polystyrene (PS) were the most commonly found. Apart from PET having its highest concentration of 0.0189 microplastic per litre (MP/L) in the SR, the concentrations of the other three most frequent polymers (PS = 0.017 MP/L, PA = 0.0752 MP/L, PP= 0.1513 MP/L) were highest in the CT. The overall prevalence of this size of microplastics in the network is low, but there was a high variability of polymer types and occurrences. These spatial and temporal variations suggested that the MP in the distribution network may exist as a series of pulses. Given the presence and polymer types, the potential for some of the microplastics to originate from materials used in the water network and domestic plumbing systems cannot be ruled out. As found before, the absolute number of microplastics in the water distribution network remained extremely low.

Ingestion and adherence of microplastics by estuarine mysid shrimp

Microplastics have been reported to be present in zooplankton, yet questions persist regarding their fate and dynamics within biota. We selected the commercial mysid shrimp, Mesopodopsis orientalis, as the focal zooplankton for this study due to their crucial role in our study area, the Inner Gulf of Thailand in January 2022. We investigated the presence of microplastics in mysid bodies and fecal pellets, examining both attached microplastics on external body parts and those ingested. In addition, we conducted microplastic feeding experiments, exposing mysids to various treatments of microplastics. The results of the field investigation indicate that mysids exhibited an average of 0.12 ± 0.03 microplastic items/mysid from whole-body samples. The shape, type, and color of microplastics found in mysids were similar to those present in seawater, with blue PET microfibers being the most prevalent. Our observations on live mysids revealed that microplastics were acquired through ingestion and adherence to appendages and exoskeletons. Microplastics were observed in mysid's fecal pellets at 0.09 ± 0.03 items/mysid, while microplastics adhering to the mysid's body and appendages were observed at 0.10 ± 0.04 items/mysid. The sizes of microplastics extracted from preserved mysids ranged from 58 μm to 4669 μm, with median of 507 μm. The laboratory experiments revealed that the presence of microalgae enhanced microplastic ingestion in mysids; microplastics incubated with a cyanobacterium, Oscillatoria sp., and diatom Navicula sp. significantly increased the number of microplastic particles ingested by mysids. This study showed that microplastics can be more ingested in mysids, especially when food items are present. Microplastic fate in these animals may involve expulsion into the environment or adherence, potentially facilitating their transfer up the marine food web.

Microplastics and plastisphere at surface waters in the Southwestern Caribbean sea

Pollution generated by plastic waste has brought an environmental problem characterized by the omnipresence of smaller pieces of this material known as microplastics (MP). This issue was addresses by collecting samples with 250 μm pore size nets in two marine-coastal sectors of Southwestern Caribbean Sea during two contrasting seasons. Higher concentrations were found in rainy season than in dry season, reaching respectively 1.72 MP/m3 and 0.22 MP/m3. Within each sector, there were differences caused firstly by localities of higher concentrations of semi-closed water bodies localities during rainy season (Ciénaga Grande de Santa Marta and La Caimanera marsh), and secondly by lower concentrations of localities with less influenced of flow rates during dry season (Salamanca and Isla Fuerte). Moreover, the lowest concentration in dry season corresponding to La Caimanera marsh reflects how the community environmental management might decrease MP pollution. In both sectors and seasons, the particles of 0.3 mm (0.3-1.4 mm) size class dominated over those of 1.4 mm (1.4-5.0 mm) (reaching each respectively 1.33 MP/m3 and 0.39 MP/m3), with a dominance of fibers, except in the rainy season in Magdalena, where they were films. Using the FTIR technique, polypropylene was identified as the most abundant polymer in both sectors. The composition of the assemblage of microorganisms attached to microplastics presented higher richness and differed from that of free-living planktonic microbes. The most abundant members of the plastisphere were proteobacteria whose major representation was the pathogenic genus Vibrio, while the cyanobacteria dominated in seawater samples.

Size dependent ingestion and effects of microplastics on survivability, hematology and intestinal histopathology of juvenile striped catfish (Pangasianodon hypophthalmus)

Microplastic pollution is drastically increasing in aquatic ecosystems and it is assumed that different sizes of microplastics have diverse impacts on the physiology of aquatic organisms. Therefore, this study was intended to examine the ingestion and size specific effects of polyamide microplastic (PA-MP) on different physiological aspects such as growth, feed utilization, survivability, blood parameters and intestinal histopathology of juvenile striped catfish (Pangasianodon hypophthalmus). In a 28-day exposure, the fish were fed with different sized PA-MP with a concentration of 500 mg per kg of feed in order to simulate highly microplastic contaminated environment. Three different treatments were set for this experiment i.e. T1, 25-50 μm (smaller microplastic); T2, 300 μm-2 mm (larger microplastic); T3, (mixed) including a control (C); each had three replicates. The highest ingestion was recorded in the gastrointestinal tract (GIT) of fish exposed to smaller PA-MP treatments (T1 followed by T3). The results also showed compromised weight gain (WG; g), specific growth rate (SGR; %/day) and feed conversion ratio (FCR) with the exposure of PA-MP. Besides, survivability significantly reduced among treatments with the ingestion of smaller sized microplastic and found lowest in T1 (65.0 ± 5.0). In addition, the presence of PA-MP in feed negatively affected the concentration of hemoglobin and blood glucose. Similarly, smaller PA-MP caused most erythrocytic cellular and nuclear abnormalities; found highest in T1 that significantly different from other treatments (p < 0.05). Various histopathological deformities were observed in fish fed with PA-MP incorporated feed. The principal component analysis (PCA) showed that the toxicity and stress imparted by smaller PA-MP affected the survivability and blood parameters where larger PA-MP caused mild to severe abnormalities. Based on eigenvector values, the major abnormalities in intestine included occurrence of epithelium columnar degeneration (ECD: 0.402; PC1), hyperplasia of internal mucosa (HISM: 0.411; PC1), beheading of villi (BV: 0.323; PC1), atrophy of mucosa (AM: 0.322; PC1), tiny vacuoles in apical villi (TV: 0.438. PC2), crypt degeneration (CD: 0.375: PC2) and atrophy of goblet cell (AGC: 0.375; PC2). Therefore, it has been speculated that the size based PA-MP ingestion in the GIT interfered with the digestion and absorption as well as caused deformities that reflected negatively in survivability and hemato-biochemical parameters of juvenile striped catfish.

Plasticlusters: A marine litter microhabitat in a marina of Tunisia, N Africa

Plastic debris is a significant and rapidly developing ecological issue in coastal marine ecosystems, especially in areas where it accumulates. This study introduces "plasticlusters", a new form of floating debris agglomeration found in the Yasmine Hammamet marina (Tunisia, North-Africa), loosely attached to pontoon ropes around the water surface level. The analysis of two samples revealed that they were formed primarily by average 2.11 mm polystyrene fragments, 3.43 mm fibers, 104 mm polypropylene and polyethylene sheets, and 122 mm decomposing seagrass leaves. They were inhabited by several taxa, including at least 2 cryptogenic and 5 non-indigenous species (NIS). Unlike other plastic formations, plasticlusters provide a novel and potentially temporal microhabitat to fouling assemblages due to their loose and unconsolidated structure which, combined with marinas being NIS hubs, could enhance NIS dispersion. The results of this study raise concerns about the combined ecological effects of debris accumulation and biocontamination inside marinas.

Emerging contaminants in water environments: progress, evolution, and prospects

This article employs bibliometric tools like VOSviewer, Bibliometrix, and CiteSpace for a comprehensive visual analysis of 1,612 documents on Emerging Contaminants in Waters from the Web of Science database. The objective is to elucidate the historical development, research hotspots, and trends in international studies of this field, offering valuable insights and guidance for future research directions. The analysis reveals a consistent increase in publications from 2003 to 2023, with the United States, China, and Spain being the most prolific contributors. A detailed examination of keyword co-occurrence and cluster analysis shows a predominant focus on themes such as pollutant detection, risk assessment, and biogeochemical cycling. Furthermore, the study underscores the significance of forming interdisciplinary networks among authors and institutions, highlighting its critical role in enhancing the quality and innovation of scientific research. The findings of this study not only chart the progression and focal points of research in this domain but also underscore the pivotal role of international collaboration, serving as an indispensable reference for shaping future research trajectories and fostering global cooperation.

Mixture toxicity of 6PPD-quinone and polystyrene nanoplastics in zebrafish

Plastic pollution, including micro- and nanoplastics, is a growing concern. Tyre-wear particles (TWPs) are the second largest source of microplastics in the ocean following abrasion of synthetic fibres. In addition to the particles themselves, TWPs contain many harmful chemicals, including 6PPD. This chemical reacts with atmospheric ozone and forms the toxic compound 6PPD-quinone (6PPDq), which poses a danger to aquatic life. There is a knowledge gap in understanding risks associated with the combined toxicity of nanoplastics (NPs) and 6PPDq. The present study aimed to investigate the toxicity of NPs and 6PPDq on adult zebrafish using phenotypic (behaviour, histology) and transcriptomic endpoints. Zebrafish were exposed to four treatments: control (contaminant-free), 50 μg/L 6PPDq, 3 mg/L polystyrene (PS)-NPs, and a combination of 50 μg/L 6PPDq and 3 mg/L PS-NPs. We did not observe locomotory dysregulation in zebrafish exposed to NPs. However, we found significant hyperlocomotion in zebrafish exposed to 6PPDq and this effect was even more substantial after co-exposure with PS-NPs. This study explores the molecular mechanisms behind these effects, identifying genes associated with neurotransmitters and fatty acid metabolism that were dysregulated by the co-exposure. Transcriptomic analysis further showed that both 6PPDq and PS-NPs impacted cellular processes associated with sterol biosynthesis, cholesterol metabolism, and muscle tissue development. The effects on these mechanisms were stronger in co-exposed zebrafish, indicating a heightened risk to cellular integrity and mitochondrial dysfunction. These results highlight the significance of mixture toxicity when studying the effects of NPs and associated chemicals like 6PPDq.

Adsorption of Macrolide Antibiotics and a Metabolite onto Polyethylene Terephthalate and Polyethylene Microplastics in Aquatic Environments

Microplastics (MPs) and antibiotics are emerging pollutants widely found in aquatic environments, potentially causing environmental harm. MPs may act as carriers for antibiotics, affecting their environmental distribution. This study investigates the adsorption of four macrolide antibiotics and a metabolite onto two types of MPs: polyethylene terephthalate (PET) and polyethylene (PE). Results revealed a linear isotherm adsorption model, with higher adsorption to PET than to PE (R2 > 0.936 for PE and R2 > 0.910 for PET). Hydrophobic interactions and hydrogen bonding could be the main adsorption mechanisms, with pore filling potentially involved. Reduced particle size enhances adsorption due to the increase of active adsorption sites. This increasement is more pronounced in PE than in PET, leading to an 11.6% increase in the average adsorption of all macrolides to PE, compared to only 5.1% to PET. Dissolved organic matter inhibits adsorption (azithromycin adsorption to PE was reduced from 12% to 5.1%), while salinity enhances it just until 1% salinity. pH slightly influences adsorption, with maximal adsorption at neutral pH. Results in real samples showed that complexity of the matrix decreased adsorption. Overall, these findings indicate that PE and PET MPs can be a vector of macrolides in aquatic environments.

Microplastic contamination in different shell length in Tivela mactroides (Born, 1778)

Microplastic identification and distribution throughout oceans has become a great concern due to its substantial uprising and its consequent interactions with marine biota. Microplastics can be absorbed and adsorbed by several marine species owing to their very small size. Among these organisms are bivalves, including ones used as food for humans. In this context, this research aims to understand the absorption scale of microplastics by Tivela mactroides according to their size and consequently life stage. Thus, T. mactroides mussels were collected at Camburi Beach (Brazil) and grouped into 30 different size classes from 06 to 35 mm. Later, 20 specimens from each size class (N = 600) had the soft tissues removed and a pool was performed through digestion with 10 % KOH solution. Results showed the presence of microplastics in all size classes of T. mactroides, evidencing that organisms from 06 mm can already be contaminated by microplastics and a tendency of the number of microplastics particles to increase as shell size increases. Furthermore, the amount of blue filament-type MPs was significantly higher than the other types and colors. Additionally, analyzes performed by Raman spectroscopy showed that the blue filaments have a PET composition. Finally, larger individuals presented larger quantities of MPs, as well as larger filaments. This might suggest that there are differences between the assimilation of the size of MPs in the different size classes, i.e. that size makes a difference.

Bioengineering of Cu2O structured macro-biotemplate for the ultra-efficient and selective hand-retrieval of glyphosate from agro-farms

Glyphosate (Gly) is a massively utilized toxic herbicide exceeding its statutory restrictions, causing adverse environmental and health impacts. Engineered nanomaterials, even though are integral to remediate Gly, their practical use is limited due to time and energy driven purifications, and negative environmental impacts. Here, a 3D wide area (~1.6 ± 0.4 cm2) Cu2O nanoparticle supported biotemplate is designed using fish-scale wastes as a sustainable approach for the ultra-efficient and selective hand-remediation of Gly from real-time samples from agro-farms. While the innate metal binding and reducing ability of collagenous scales aided self-synthesis cum grafting of Cu2O, the selective binding potential of Cu2O to Gly facilitated its hand-retrieval; as assessed using optical characterizations, Fourier transform infrared spectroscopy, thermogravimetric analysis and liquid chromatography mass spectrometry. Optimization studies revealed extractions of diverse pay-loads of Gly between 0.1 μg/mL to 40 μg/mL per 80 mg biotemplate grafted with ~6.354 μg of sub-5 nm Cu2O and was exponential to the number of Cu2O@biotemplates. Even though pH and surfactant didn't have any impact on the adsorption of Gly to the Cu2O@biotemplates, increase in the ionic strength led to a drastic increase in the adsorption. Density function theory simulations unveiled the involvement of phosphonic and carboxylic groups of Gly for interaction with Cu2O with a bond length of 1.826 Å and 1.833 Å, respectively. Overall, our sustainably generated, cost-efficient, hand-retrievable Cu2O supported biotemplate can be generalized to extract diverse organophosphorus toxins from agro-farms and other sewage embodiments. SYNOPSIS: Glyphosate is an excessively applied herbicide with potent health hazards and carcinogenicity. Thus, a hand removable Cu2O-supported biotemplate to selectively and efficiently remediate glyphosate from irrigation water is developed.

Microplastics as an emerging threat to amphibians: Current status and future perspectives

Given their pervasiveness in the environment, particularly in aquatic ecosystems, plastics are posing a growing concern worldwide. Many vertebrates and invertebrates in marine, freshwater, and terrestrial ecosystems exhibit microplastic (MP) uptake and accumulation. Some studies have indicated the fatal impacts of MPs on animals and their possible transfer through food chains. Thus, it is crucial to study MP pollution and its impacts on environment-sensitive and globally threatened animal groups, such as amphibians, which also play an important role in the energy transfer between ecosystems. Unfortunately, research in this field is lacking and sources of organized information are also scarce. Hence, we systematically reviewed published literature on MPs in amphibians to fill the existing knowledge gap. Our review revealed that most of the previous studies have focused on MP bioaccumulation in amphibians, whereas, only a few research highlighted its impacts. We found that more than 80% of the studied species exhibited MP accumulation. MPs were reported to persist in different organs for a long time and get transferred to other trophic levels. They can also exhibit cytotoxic and mutagenic effects and may have fatal impacts. Moreover, they can increase the disease susceptibility of amphibians. Our study concludes the MPs as a potential threat to amphibians and urges increasing the scope and frequency of research on MP pollution and its impacts on this vulnerable animal group. We also provide a generalized method for studying MPs in amphibians with future perspectives and research directions. Our study is significant for extending the knowledge of MPs and their impacts on amphibians and guiding prospective research.

Biodegradation of low-density polyethylene film by Bacillus gaemokensis strain SSR01 isolated from the guts of earthworm

In recent years, low-density polyethylene (LDPE) has emerged as an essential component of the routine tasks that people engage in on a daily basis. However, over use of it resulted in environmental buildup that contaminated aquatic habitats and human health. Biodegradation is the most effective way for controlling pollution caused by synthetic plastic waste in a sustainable manner. In the present study, the LDPE degrading bacterial strain was screened from gut of Earthworms collected from plastic waste dumped area Mettur dam, Salem district, Tamil Nadu, India. The LDPE degrading bacterial strain was screened and identified genotypically. The LDPE degrading Bacillus gaemokensis strain SSR01 was submitted in NCBI. The B. gaemokensis strain SSR01 bacterial isolate degraded LDPE film after 14 days of incubation and demonstrated maximum weight loss of up to 4.98%. The study of deteriorated film using attenuated total reflection-Fourier transform infrared revealed the presence of a degraded product. The degradation of LDPE film by B. gaemokensis strain SSR01 was characterized by field-emission scanning electron microscopy analysis for surface alterations. The energy dispersive X-ray spectroscopy test confirmed that the broken-down LDPE film had basic carbon reduction. The present study of LDPE flim biodegradation by B. gaemokensis strain SSR01 has acted as a suitable candidate and will help in decreasing plastic waste.

The mitochondrial link: Phthalate exposure and cardiovascular disease

Phthalates' pervasive presence in everyday life poses concern as they have been revealed to induce perturbing health defects. Utilized as a plasticizer, phthalates are riddled throughout many common consumer products including personal care products, food packaging, home furnishings, and medical supplies. Phthalates permeate into the environment by leaching out of these products which can subsequently be taken up by the human body. It is previously established that a connection exists between phthalate exposure and cardiovascular disease (CVD) development; however, the specific mitochondrial link in this scenario has not yet been described. Prior studies have indicated that one possible mechanism for how phthalates exert their effects is through mitochondrial dysfunction. By disturbing mitochondrial structure, function, and signaling, phthalates can contribute to the development of the foremost cause of death worldwide, CVD. This review will examine the potential link among phthalates and their effects on the mitochondria, permissive of CVD development.

Microplastics in packaged water, community stored water, groundwater, and surface water in rivers of Tamil Nadu after the COVID-19 pandemic outbreak

The increased load of plastic in waste streams after the COVID-19 pandemic outbreak has increased the possibility of microplastics (MPs) contamination channelling through the rivers and infiltrating the aquatic ecosystems. MPs in packaged water, community-stored water, groundwater, and surface water of Kaveri River (KR), Thamirabarani River (TR), Adyar River (AR), and Cooum River (CR) in Tamil Nadu were therefore investigated about 2 years after the COVID-19 pandemic outbreak. Using μFTIR and μRaman spectroscopy, polyamide, polypropylene, polyethylene, ethylene vinyl alcohol copolymer resin, and polyvinyl chloride were identified as the primary polymer types. The average number of MPs was 2.15 ± 1.9 MP/L, 1.1 ± 0.99 MP/L, 5.25 ± 1.15 MP/L, and 4 ± 2.65 MP/L in KR, TR, AR, and CR, respectively, and 1.75 ± 1.26 MP/L in groundwater, and 2.33 ± 1.52 MP/L in community stored water. Only LDPE was detected in recycled plastic-made drinking water bottles. More than 50% of MPs were found to be of size less than 1 mm, with fibrous MPs being the prevalent type, and a notable prevalence of blue-coloured microplastics in all the sample types. The Pollution Load Index (PLI) was >1 in all the rivers. Toxicity rating based on the polymer risk index (PORI) categorized AR and TR at medium risk (category II), compared to KR and CR at considerable risk (category III). Overall pollution risk index (PRI) followed a decreasing trend with CR > AR > KR > TR of considerable to low-risk category. Ecological risk assessment indicates a negligible risk to freshwater biota, except for four sites in the middle and lower stretches of Adyar River (AR - 2, AR - 4) and upper and lower stretches of Cooum River (CR - 1, CR - 3), located adjacent to direct sewer outlets, and one location in the lower stretch of Kaveri River (KR - 9), known for fishing and tourist activities.

Transport behavior of microplastics in soil‒water environments and its dependence on soil components

Microplastic (MP) pollution has become a global concern, and the transport behavior of MPs in soil-water systems is vital in determining their distribution and potential risks to the subsurface environment. To reveal the role of various soil components on MP migration, the downward transport behavior of polystyrene (PS) MPs were explored in this study via column experiments with mono or multi-soil components as porous media. Compared with the selected soil mineral volcanic rock (VR) and fine river sand (RS), condensed soil organic matter (SOM) resulted in higher transport efficiencies for PS microparticles, with greater than 90% total mass recovery under the experimental conditions. The more surface charges of SOM than minerals contribute to the high migration efficiency of PS MPs, and electrostatic repulsion is assumed a significant driving mechanism in the migration of negatively charged PS particles in soils. The ionic strength of porewater influenced the PS migration behaviors by altering the electrostatic interactions between the MPs and soil grains. The uniform mixing of SOM with mineral grains significantly enhanced the transport efficiency of PS MPs in the columns. The results provide supports for the prediction and prevention of the risks of MPs to the subsurface environment.

Preparation of synthetic micro- and nano plastics for method validation studies

Microplastic (MP) pollution is a persisting global problem. Accurate analysis is essential in quantifying the effects of microplastic pollution and develop novel technologies that reliably and reproducibly measure microplastic content in various samples. The most common methods for this are FTIR and Raman spectroscopy. Coloured, standardized beads are often used for method validation tests, which limits the conclusions to a very specific case rarely observed in the natural environment. This study focuses on the preparation of reference micro- and nanoplastics via cryogenic milling and shows their use for FTIR and Raman method validation studies. MPs can now be reproducibly milled from various plastics, offering the advantages of a better representation of MPs in real environment. Moreover, this study highlights issues with the current detection methods, up to now considered as the most reliable ones for MP detection and identification. Such issues, e.g. misidentification, will need to be addressed in the future. Additionally, milled MPs were used in experiments with commercial high-resolution imaging device, enabling a possible in-situ optical detection of microplastics. These experiments represent a step forward in understanding MPs in a water sample and provide a basis for a more accurate detection and identification directly from water, which would considerably reduce the time of analysis.

Assessment of dietary polyvinylchloride, polypropylene and polyethylene terephthalate exposure in Nile tilapia, Oreochromis niloticus: Bioaccumulation, and effects on behaviour, growth, hematology and histology

Microplastics (MPs) have been recognized as emerging aquatic pollutants receiving major concern due to their detrimental effects on aquatic life. Nile Tilapia, Oreochromis niloticus is a model species considered in toxicological studies to address the effects of pollutants in freshwater animals. However, comprehensive knowledge comparing the impacts on fish across various MPs polymers is scarce. Therefore, the overarching aim of the current study was to examine the bioconcentration of MPs polymers: polyvinylchloride (PVC), polypropylene (PP), and polyethylene terephthalate (PET), and their toxic effects on growth, and behavioral responses, hematology, and histology of gills, liver, and intestine in O. niloticus. Fishes were subjected to a 21-day dietary exposure to MPs by assigning them into six treatment groups: T1 (4% of PVC), T2 (4% of PP), T3 (4% of PET), T4 (8% of PVC), T5 (8% of PP), T6 (8% of PET), and control (0% of MPs), to assess the effects on fish across the polymers and dosage. Results showed several abnormalities in anatomical and behavioral parameters, lower growth, and high mortality in MPs-exposed fish, indicating a dose-dependent relationship. The elevated dosage of polymers raised the bioavailability of PVC, PP, and PET in gills and gut tissues. Noteworthy erythrocyte degeneration referred to cytotoxicity and stress imposed by MPs, whereas the alterations in hematological parameters were possibly due to blood cell damage, also indicating mechanisms of defense against MPs toxicity. Histopathological changes in the gills, liver, and intestine confirmed the degree of toxicity and associated dysfunctions in fish. A higher sensitivity of O. niloticus to PET-MPs compared to other polymers is likely due to its chemical properties and species-specific morphological and physiological characteristics. Overall, the present study reveals valuable insights into the emerging threat of MPs toxicity in freshwater species, which could be supportive of future toxicological research.

Deep learning analysis for rapid detection and classification of household plastics based on Raman spectroscopy

The overuse of plastics releases large amounts of microplastics. These tiny and complex pollutants may cause immeasurable damage to human social life. Raman spectroscopy detection technology is widely used in the detection, identification and analysis of microplastics due to its advantages of fast speed, high sensitivity and non-destructive. In this work, we first recorded the Raman spectra of eight common plastics in daily life. By adjusting parameters such as laser wavelength, laser power, and acquisition time, the Raman data under different acquisition conditions were diversified, and the corresponding Raman spectra were obtained, and a database of eight household plastics was established. Combined with deep learning algorithms, an accurate, fast and simple classification and identification method for 8 types of plastics is established. Firstly, the acquired spectral data were preprocessed for baseline correction and noise reduction, Then, four machine learning algorithms, linear discriminant analysis (LDA), decision tree, support vector machine (SVM) and one-dimensional convolutional neural network (1D-CNN), are used to classify and identify the preprocessed data. The results showed that the classification accuracy of the three machine learning models for the Raman spectra of standard plastic samples were 84%, 93% and 93% respectively. The 1D-CNN model has an accuracy rate of up to 97% for Raman spectroscopy. Our study shows that the combination of Raman spectroscopy detection techniques and deep learning algorithms is a very valuable approach for microplastic classification and identification.

Toxic effects of nanoplastics and microcystin-LR coexposure on the liver-gut axis of Hypophthalmichthys molitrix

Plastic products and nutrients are widely used in aquaculture facilities, resulting in copresence of nanoplastics (NPs) released from plastics and microcystins (MCs) from toxic cyanobacteria. The potential effects of NPs-MCs coexposure on aquatic products require investigation. This study investigated the toxic effects of polystyrene (PS) NPs and MC-LR on the gut-liver axis of silver carp Hypophthalmichthys molitrix, a representative commercial fish, and explored the effects of the coexposure on intestinal microorganism structure and liver metabolic function using traditional toxicology and multi-omics association analysis. The results showed that the PS-NPs and MC-LR coexposure significantly shortened villi length, and the higher the concentration of PS-NPs, the more obvious the villi shortening. The coexposure of high concentrations of PS-NPs and MC-LR increased the hepatocyte space in fish, and caused obvious loss of gill filaments. The diversity and richness of the fish gut microbes significantly increased after the PS-NPs exposure, and this trend was amplified in the copresence of MC-LR. In the coexposure, MC-LR contributed more to the alteration of fish liver metabolism, which affected the enrichment pathway in glycerophospholipid metabolism and folic acid biosynthesis, and there was a correlation between the differential glycerophospholipid metabolites and affected bacteria. These results suggested that the toxic mechanism of PS-NPs and MC-LR coexposure may be pathological changes of the liver, gut, and gill tissues, intestinal microbiota disturbance, and glycerophospholipid metabolism imbalance. The findings not only improve the understanding of environmental risks of NPs combined with other pollutants, but also provide potential microbiota and glycerophospholipid biomarkers in silver carp.

Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling

The processes by which small nanoplastics (NPs) accumulate in soil are unclear. To clarify the different deposition processes that affect small NPs (< 30 nm) compared to larger NPs in the soil environment, due to their interaction with clays as major soil components, the transport behavior of two-sized NPs (20 and 80 nm) with two clays (diatomite (Diat) and montmorillonite (Mont)) in NaCl and CaCl2 solutions were investigated in water-saturated quartz sand columns. The experimental results showed that more 20 nm NPs could enter the lattice structure of Diat than Mont in NaCl solution. This contributed to the stronger deposition of 20 nm NPs by Diat on sand, which was associated with a lower k1d/k1 value (obtained from two-site kinetic attachment model). In contrast, 80 nm NPs had a stronger reversible retention than 20 nm NPs with Mont, even though both sizes of NPs-Mont displayed a similar transportability. In CaCl2 solution, the larger NPs-Mont hetero-aggregates formed with a stronger suppressed depth of φmax based on Derjaguin-Landau-Verwey-Overbeek theory. Thus, Mont had a stronger transport inhibition than Diat for both NPs sizes, with a lower k1d/k1. These findings could benefit in predicting the size-based deposition of NPs in a heterogenous soil environment.

Tracking anthropogenic microparticles in wildlife of an alpine insular environment

Despite the isolation of remote natural regions, it has been discovered that they are experiencing the accumulation of anthropogenic microparticles (i.e., microplastics or natural or semisynthetic cellulosic particles). Teide National Park (Canary Islands, Spain) is a high-mountain protected area known for its rich biodiversity. This study aims to assess the occurrence of coloured anthropogenic particles in the faecal matter of wild mammals, specifically rabbits and mouflons, residing in the park. With this purpose, faeces were collected from 68 systematically distributed sampling points. A stereomicroscopy-guided grinding process allowed a chemical-free and quick visual inspection of 616 individual excreta, revealing that 96% were particle-free. However, 37 anthropogenic particles were found, which correspond to 0.79 ± 0.20 items per gram of dry faecal matter. The archetypical particle was a cellulosic blue microfibre of 2721 ± 407 µm, though poly(ethylene-vinyl acetate) and polypropylene were also identified via micro Fourier-transform infrared spectroscopic analysis. Atmospheric deposition and touristic pressure may be the sources of the anthropogenic particles, as they were randomly found in 36% of the sampling points. These findings represent the first evidence of anthropogenic particle ingestion by wild rabbits and mouflons, signifying the introduction of microplastics into terrestrial food chains in a remote high-mountain environment.

Impacts of education and perception on Vietnamese high school students' behaviors regarding plastic waste: the mediating role of attitude

This study analyzed the impact of educational, perception, and attitudinal factors on the plastic waste behavior of high school students in Vietnam. A cross-sectional research design and questionnaire survey method were used to collect data from 573 high school students. All the statistical analyses and hypothesis tests were performed using SPSS 26 and AmoS 20 software. Research results show that perception does not directly affect students' behavior toward the plastic waste problem (B = 0.051, p = 0.201 > 0.05, CI = [- 0.027; 0.130]) but has an indirect impact through attitude mediation, with an impact coefficient of B = 0.107 (p = 0.016 < 0.05, CI = [0.042; 0.177]). Educational factors positively impact students' behavior toward plastic waste through both direct effects, with an impact coefficient of B = 0.546 (p = 0.00 < 0.05, CI = [0.473; 0.620], and indirect effects, mediated by attitude, with an impact coefficient of B = 0.017 (p = 0.007 < 0.05, CI = [0.003; 0.037]). These findings are new compared to previous studies, contributing to enriching theories related to behavior toward the plastic waste problem and bringing practical significance to Vietnam. The findings of this study provide the basis for proposing measures to improve plastic waste behaviors for Vietnamese high school students.

Integrating aggregate exposure pathway and adverse outcome pathway for micro/nanoplastics: A review on exposure, toxicokinetics, and toxicity studies

Micro/nanoplastics (MNPs) have emerged as a significant environmental concern due to their widespread distribution and potential adverse effects on human health and the environment. In this study, to integrate exposure and toxicity pathways of MNPs, a comprehensive review of the occurrence, toxicokinetics (absorption, distribution, and excretion [ADE]), and toxicity of MNPs were investigated using the aggregate exposure pathway (AEP) and adverse outcome pathway (AOP) frameworks. Eighty-five papers were selected: 34 papers were on detecting MNPs in environmental samples, 38 papers were on the ADE of MNPs in humans and fish, and 36 papers were related to MNPs toxicity using experimental models. This review not only summarizes individual studies but also presents a preliminary AEP-AOP framework. This framework offers a comprehensive overview of pathways, enabling a clearer visualization of intricate processes spanning from environmental media, absorption, distribution, and molecular effects to adverse outcomes. Overall, this review emphasizes the importance of integrating exposure and toxicity pathways of MNPs by utilizing AEP-AOP to comprehensively understand their impacts on human and ecological organisms. The findings contribute to highlighting the need for further research to fill the existing knowledge gaps in this field and the development of more effective strategies for the safe management of MNPs.

Citizen science through a recreational underwater diving project supports the collection of large-scale marine litter data: The Oceania case study

In recent years, a growing body of literature on seafloor macro-litter has been produced worldwide. However, the spatial coverage of these studies is still limited and highly unbalanced, resulting in considerable knowledge gaps in some regions. To address this lack of information in Oceania, we extracted data from the Citizen Science project Dive Against Debris® to characterize marine debris collected by volunteer scuba divers on the coastal seafloor. Overall, the average litter density was 58.22 items/100m2, with plastics accounting for approximately 50 % of the total abundance and Single Use Plastics accounting for nearly 17 %. Notably, 36 % of the total litter abundance consisted of lost Fishing Gear including fishing lines, sinkers, baits and hooks as the most abundant debris items. To reduce lost fishing gear, clean-up initiatives by divers along with management actions such as education programs for fishermen, gear restrictions and the identification of designated fishing sites are recommended.

Determinants of obesity in Latin America

Obesity rates are increasing almost everywhere in the world, although the pace and timing for this increase differ when populations from developed and developing countries are compared. The sharp and more recent increase in obesity rates in many Latin American countries is an example of that and results from regional characteristics that emerge from interactions between multiple factors. Aware of the complexity of enumerating these factors, we highlight eight main determinants (the physical environment, food exposure, economic and political interest, social inequity, limited access to scientific knowledge, culture, contextual behaviour and genetics) and discuss how they impact obesity rates in Latin American countries. We propose that initiatives aimed at understanding obesity and hampering obesity growth in Latin America should involve multidisciplinary, global approaches that consider these determinants to build more effective public policy and strategies, accounting for regional differences and disease complexity at the individual and systemic levels.

Changes in Flavor-Related Biomarkers in Pacific Oysters (Crassostrea gigas) Following Microplastic Exposure

Microplastics have been an emerging threat to filtering species and the ingestion and impacts of microplastics on oysters are a cause for concern. However, much remains unknown about the effects of microplastics on flavor-related biomarkers in oysters. Herein, a laboratory microplastic exposure with concentrations of 1, 10, and 100 mg/L for 15 days was performed to investigate the impacts of microplastics on the flavor parameters of oysters. Exposure to microplastics changed the odor characteristics of oysters. Microplastic exposure had minor effects on the fatty acid composition; however, significant alterations in free amino acids and nucleotides were observed under the 1 and 10 mg/L exposure groups, respectively. The overall results indicated 10 mg/L of microplastic exposure significantly increased the equivalent umami value of oysters. These findings stressed the effects of microplastics on oysters and would be an important reference for the assessment of the potential risks associated with microplastics in marine edible species.

Evaluation of bioplastics biodegradation under simulated landfill conditions

Bioplastics that are generated from renewable sources have been regarded as an alternative to conventional plastics. Polylactic acid (PLA) is one of the mostly produced bioplastics because of its long shelf life for various applications. Even though bioplastics have drawn attention recently, their ultimate fate in landfills is still unknown. In this study, a standardized laboratory-scale lysimeter experiment was performed for the simulation of landfill conditions in order to evaluate the biodegradability of PLA during municipal solid waste stabilization. The reactors were loaded with municipal solid waste (MSW) taken from an operating landfill, certified PLA cups, and seed sludge. Various phases of landfill stabilization were simulated; hence, the reactors were operated under aerobic, semi-aerobic, and anaerobic conditions, respectively. Throughout the operation, both leachate and biogas generation in the reactors were regularly monitored. At the end of each phase, bioplastic cups were removed from the reactors, gently cleaned, weighed, and examined under a scanning electron microscope (SEM). The experimental results indicated that bioplastics did not undergo significant biodegradation during the first two stabilization phases (aerobic and semi-aerobic). On the other hand, it was observed that the cups were much softer and whiter at the end of the anaerobic phase. The weight of cups decreased by 12.8% on average, and their surfaces were prominently damaged after the completion of the last phase indicating the potential signs of biodegradation.

What do we know about plastic pollution in Brazilian aquatic ecosystems?

Due to the increasing use and inadequate disposal of plastic by humans, aquatic environments have become receptacles for pollutants such as plastic. This study aimed to perform an analysis of plastic particles pollution in Brazilian aquatic ecosystems with special attention to inland aquatic environments and fish in order to identify information gaps in this field. Manuscripts published in the last 21 years and indexed in the Web of Science database were consulted. A total of 185 met the proposed inclusion criteria, such as having empirical data, being conducted in Brazil, and dealing with plastic pollution. In general, the number of studies increases over the years, and this increasing number of publications is accompanied by declared financial support; the Southeast and Northeast regions are the regions that publish the most on the topic, with São Paulo, Rio de Janeiro, and Pernambuco being the main states; the main focus of the studies is the detection of plastic particles mainly in biota (51%) and sediment (34%), and the most frequent ecosystem is the marine (89%); regarding the taxa, the majority is about plastic detection in fish (75%). Only 18% of the papers studying fishes consider their bio-ecological data, and only 17% of the manuscripts carried out the chemical characterization of the particles. However, 99% of the papers considered the shape of the plastic particle. We emphasize the need for more research and grants for studies with Brazilian inland aquatic ecosystems on the effects of plastic particle pollution on freshwater fish. Regional and national research funding agencies are very important to encourage an increase in the number of grants and specific calls for studies on plastic pollution and its impact on freshwater biota, considering the different macro-regions in Brazil, especially in the northern region.

Microplastics in Scylla Serrata: A baseline study from southwest India

Scylla serrata plays a crucial role in India's seafood exports yet there exists limited understanding on the occurrence of microplastics (MPs) in these crabs. In this baseline study, we examined the presence of microplastics in the digestive tracts of S. serrata collected from the Kota mangroves, southwestern coast of India. Our analysis revealed the presence of 264 MPs in all the samples with an average (± standard deviation) of 29.33 (±11.53) MPs/Individual. The most dominant categories were fibres (98.86 %) and fragments (1.14 %). Primarily 0.1-0.3 mm (50.90 %) and 0.3-1 mm (37.65 %) size range dominated. The predominant polymers were polypropylene (33.71 %), high-density polyethylene (31.44 %), and polyethylene terephthalate (17.80 %). Scanning electron microscopy revealed extensive weathering on the surface of the microplastics. Risk assessments indicated severe risks to S. serrata due to microplastic ingestion emphasizing the need to protect delicate ecosystems like mangroves and the biota within.

Microplastics in dermatology: Potential effects on skin homeostasis

BACKGROUND

Microplastics (MPs) and nanoplastics (NPs) have become a growing concern in dermatology due to their widespread presence in cosmetic formulations and the environment. These minuscule synthetic polymer particles prompt an essential exploration of their potential impact on dermatological homeostasis.

AIMS

This study aims to investigate the effects of MPs and NPs on the integumentary system. Specifically, it seeks to understand the potential cutaneous alterations, inflammatory responses, and disruptions to the skin's physiological functions caused by these synthetic particles.

PATIENTS/METHODS

The investigation involves a comprehensive analysis of emerging research on MPs and NPs. This includes their presence in cosmetic formulations and environmental pervasiveness. The study delves into their capacity to breach the cutaneous barrier, raising concerns about the implications of prolonged exposure.

RESULTS

Evidence suggests that MPs and NPs may indeed incite cutaneous alterations, provoke inflammatory responses, and disturb the homeostasis of the skin's physiological functions. Their small dimensions enhance their capability to breach the cutaneous barrier, further emphasizing the apprehensions associated with prolonged exposure.

CONCLUSIONS

While a precise understanding of the implications of MPs and NPs on dermatological health remains an ongoing scientific endeavor, this study underscores the growing significance of these synthetic particles. The findings emphasize the need for proactive measures to safeguard both individual well-being and environmental preservation in the context of dermatological health.

Polystyrene microplastics effects on zebrafish embryological development: Comparison of two different sizes

Microplastics have become a great worldwide problem and it's therefore important to study their possible effects on human and environmental health. In this study, zebrafish embryos were used to compare two different sizes of polystyrene microplastics (PS-MPs), 1 µm and 3 µm respectively, at 0.01, 0.1, 1.0 and 10.0 mgL-1, and were monitored up to 72 h. Toxicity tests demonstrated that neither of the PS-MPs altered the embryos' survival and the normal hatching process. Instead, higher concentrations of both sizes caused an increase of the heart rate and phenotypic changes. The PS-MPs of both sizes entered and accumulated in the larvae at the concentration of 10.0 mgL-1 and the same concentration caused an increase of apoptotic processes correlated to redox homeostasis changes. The reported results give a realistic view of the negative effects of exposure to PS-MPs and provide new information on their toxicity, also considering their sizes.

Independent and combined effects of microplastics pollution and drought on soil bacterial community

Global terrestrial ecosystems are simultaneously threatened by multiple environmental pressures, with microplastics (MPs) pollution and drought possibly being the most pressing, both of which may have unanticipated effects on soil organisms. Here, we investigated the responses of diversity, composition and functions of soil bacterial community to MPs pollution (including two MPs types: polyethylene (PE) and polylactic acid (PLA); two MPs sizes: < 20 μm and <300 μm) and drought in microcosms. We found that only 20 μm PLA MPs significantly decreased soil bacterial diversity by 17.4 % and altered soil bacterial community composition, while PE MPs and 300 μm PLA MPs had no significant effects. The copiotrophic bacteria (i.e., Proteobacteria and Firmicutes) were enriched in the 20 μm PLA MPs pollution soils due to the enhanced dissolved organic carbon contents. Moreover, our results showed that the 20 μm PLA MPs also affected the potential phenotypes and functions of soil bacterial community, increasing the potentially pathogenic, stress-tolerant, containing mobile elements and forming biofilms phenotypes, and promoting membrane transport and signal transduction pathways. These results suggested that the effects of MPs on soil bacterial community varied depending on MPs types and sizes. However, drought significantly increased soil bacterial diversity by 10.3 % and affected soil bacterial community composition in the 20 μm PLA MPs pollution soils. We also found that drought inhibited the levels of potentially pathogenic, containing mobile elements and forming biofilms phenotypes in the 20 μm PLA MPs pollution soils. Taken together, these findings reveal that drought may alleviate the adverse effects of MPs pollution on soil bacterial community, which enhances our understanding of the interactive effects of multiple global change factors on agroecosystem functions.

Degradation of Plastic Beads Containing Low Density Polyethylene (LDPE) by Sequential Photolysis, Hydrolysis and Bacterial Isolates

Plastic is an important part of today's human daily lifestyle, and it is classified as a "global pollutant" due to its durability. The natural degradation of plastic is extremely slow and will take a hundred years or more. The ultimate destinations of plastics as well as their effects on the ecosystem vary with the type of plastic and the rate of their degradation. In this study, an attempt was made to explain the degradation of low-density polyethylene (LDPE) plastic beads with the help of selected bacterial isolates in both laboratory and field conditions. 16 S rRNA gene sequencing further identified the bacterial isolates as Micrococcus luteus and Bacillus pumilus, obtained from the municipal waste disposal site near Anand, Gujarat, India. The beads were subjected to photolysis and hydrolysis for a predetermined amount of time in addition to biodegradation. After 60 days of treatment with Pseudomonas aeruginosa, Micrococcus luteus, and Bacillus pumilus in both laboratory and field conditions, a significant percentage decrease in the weight of LDPE beads was observed. Pseudomonas aeruginosa was taken as a positive control. Further, the rate of degradation was found to be accelerated in the presence of 10% starch.

An Emerging Role of Micro- and Nanoplastics in Vascular Diseases

Vascular diseases are the leading causes of death worldwide, and they are attributable to multiple pathologies, such as atherosclerosis, diabetes, and chronic obstructive pulmonary disease. Exposure to various environmental contaminants is associated with the development of various diseases, including vascular diseases. Among environmental contaminants, micro- and nanoplastics have gained attention as global environmental risk factors that threaten human health. Recently, extensive research has been conducted on the effects of micro- and nanoplastics on various human diseases, including vascular diseases. In this review, we highlight the effects of micro- and nanoplastics on vascular diseases.

Challenges of proper disposal of old long-lasting insecticidal nets and its alternative uses in rural south-eastern Tanzania

INTRODUCTION

Insecticide-treated nets (ITNs), specifically long-lasting insecticidal nets (LLINs), are the most commonly used, scalable, and cost-effective tools for controlling malaria transmission in sub-Saharan Africa. However, the multiple alternative uses of retired LLINs have been associated with poor disposal practices. The World Health Organization (WHO) has provided guidelines and recommendations for the proper management of worn-out LLINs. This study assessed the existing alternative uses and disposal practices of old LLINs.

METHODS

An explanatory sequential mixed-methods approach was used to assess LLINs existing alternative uses, disposal practices, knowledge, and perceptions regarding WHO recommendations on proper disposal of old LLINs among stakeholders in Kilombero and Ulanga districts, south-eastern Tanzania. A survey questionnaire was administered to 384 participants. Furthermore, the study employed focus group discussions (FGD) and key informant interviews (KII) to elucidate responses regarding existing disposal practices, associated challenges, and alternative uses of LLINs. The insights derived from both study components were subsequently used for inferential analysis.

RESULTS

The major challenge influencing the proper disposal of LLINs was limited awareness of how to properly dispose of them. Of the 384 people surveyed, 97.0% were not aware of the WHO recommendations for the proper disposal of old LLINs. All key informants were unaware of the WHO guidelines for proper disposal of old LLINs. The common methods used to dispose of LLINs were burning (30.7%), disposing them into garbage pits (14.8%), and alternative uses (12.2%). Of the 239 respondents with LLINs, 41.0% had alternative use, while 59.0% had no alternative use. The common alternative uses were ropes for tying or covering items (20.9%), garden fencing (7.5%), chicken coops (5.0%), and 7.5% for other minor alternative uses.

CONCLUSION

Strengthening awareness and education on proper LLIN disposal practices among community members and key stakeholders is essential for enhancing malaria control efforts and preventing environmental pollution.

Integrating transcriptomics and biochemical analysis to understand the interactive mechanisms of the coexisting exposure of nanoplastics and erythromycin on Chlorella pyrenoidosa

Nanoplastics and antibiotics frequently co-exist in water polluted by algal blooms, but little information is available about interaction between substances. Erythromycin, as a representative of antibiotics, has been frequently detected in aquatic environments. This investigation attempted to reveal the interaction mechanism of nanoplastics and erythromycin on Chlorella pyrenoidosa. Results demonstrated that the joint toxicity of erythromycin and nanoplastics was dynamic and depended on nanoplastics concentration. Antagonistic effects of 1/2 or 1 EC50 erythromycin and nanoplastic concentration (10 mg/L) on the growth of C. pyrenoidosa was observed. The joint toxicity of 1/2 or 1 EC50 erythromycin and nanoplastic concentration (50 mg/L) was initially synergistic during 24-48 h and then turned to antagonistic during 72-96 h. Consequently, antagonistic effect was the endpoint for joint toxicity. Integration of transcriptomics and physiological biochemical analysis indicated that the co-existence of nanoplastics and erythromycin affected the signal transduction and molecular transport of algal cell membrane, induced intracellular oxidative stress, and hindered photosynthetic efficiency. Overall, this study provided a theoretical basis for evaluating the interactive mechanisms of nanoplastics and antibiotics.

Mitigating microplastic pollution: A critical review on the effects, remediation, and utilization strategies of microplastics

Microplastics are found ubiquitous in the natural environment and are an increasing source of worry for global health. Rapid industrialization and inappropriate plastic waste management in our daily lives have resulted in an increase in the amount of microplastics in the ecosystem. Microplastics that are <150 μm in size could be easily ingested by living beings and cause considerable toxicity. Microplastics can aggregate in living organisms and cause acute, chronic, carcinogenic, developmental, and genotoxic damage. As a result, a sustainable approach to reducing, reusing, and recycling plastic waste is required to manage microplastic pollution in the environment. However, there is still a significant lack of effective methods for managing these pollutants. As a result, the purpose of this review is to convey information on microplastic toxicity and management practices that may aid in the reduction of microplastic pollution. This review further insights on how plastic trash could be converted as value-added products, reducing the load of accumulating plastic wastes in the environment, and leading to a beneficial endeavor for humanity.

Physical characteristics of microplastic particles and potential for global atmospheric transport: A meta-analysis

Recent interest in microplastic pollution of natural environments has brought forth samples which confirm the pollutant's omnipresence in a variety of ecosystems. This includes locations furthest removed from human activity. Atmospheric transport and deposition are suspected as the primary transport pathway to these remote locations. The factors most influential on participation in atmospheric transport are yet to be determined. This meta-analysis aims to identify patterns that exist between physical characteristics of microplastic particles and their potential for atmospheric transport. Our review addresses the following questions: Which characteristics of microplastic particles promote atmospheric transport and deposition into remote regions, and how significant are these factors in determining distance transported from their sources? This article analyzes commonly reported physical attributes-- shape, polymer composition and color-- from studies in urban and remote areas. The analysis of 68 studies, composed of data from 2078 samples, shows higher occurrence of microplastic particles in remote samples with fiber shapes, polyester compositions, and red, blue, and transparent colors. This meta-analysis is the first to identify patterns between physical properties of microplastic particles and extent of their participation in atmospheric transport to global remote locations.

Microplastic pollution and risk assessment in surface water and sediments of the Zandvlei Catchment and estuary, Cape Town, South Africa

Microplastic (MP) (plastic <5 mm) pollution in South Africa is widespread but few studies have been done in catchments and estuaries of the country. The aim of this study was to investigate the abundance, characteristics and risks posed by microplastics in the Zandvlei Catchment and Estuary in Cape Town, South Africa. Water and sediment were sampled between 2019 and 2021, during wet and dry seasons, MPs extracted and identified using microscopy and fourier-transformed infrared spectrophotometry (FTIR) analyses. MP abundances were 70.23 ± 7.36 (standard error) MPs/Kg dw in sediment and 2.62 ± 0.41 MP/L in water samples for the study period. Lower reaches of the catchment and upper reaches of the estuary can be considered sinks for MP contamination as these sites recorded higher MP abundances. MPs were mainly transparent fibres smaller than 0.5 mm. Polyethylene (46%) followed by polypropylene (16%) fibres were the most common polymers recorded. Pollution load indices in MPs were categorised as dangerous in both water and sediment. MP polymer risk indices ranged from moderate in catchment sediment to very high in catchment water. Pollution risk indices were categories as dangerous in water (catchment and sediment) and sediment estuary but low in catchment sediment. Ecological risk assessments hence indicated that polymers in water and sediment were mostly dangerous and poses a threat to the ecological health of both the catchment and estuary studied.

Chemical recycling of polyolefins via ring-closing metathesis depolymerization

The current insufficient recycling of commodity polymer waste has resulted in pressing environmental and human health issues in our modern society. In the quest for next-generation polymer materials, chemists have recently shifted their attention to the design of chemically recyclable polymers that can undergo depolymerization to regenerate monomers under mild conditions. During the past decade, ring-closing metathesis reactions have been demonstrated to be a robust approach for the depolymerization of polyolefins, producing low-strain cyclic alkene products which can be repolymerized back to new batches of polymers. In this review, we aim to highlight the recent advances in chemical recycling of polyolefins enabled by ring-closing metathesis depolymerization (RCMD). A library of depolymerizable polyolefins will be covered based on the ring size of their monomers or depolymerization products, including five-membered, six-membered, eight-membered, and macrocyclic rings. Moreover, current limitations, potential applications, and future opportunities of the RCMD approach will be discussed. It is clear from recent research in this field that RCMD represents a powerful strategy towards closed-loop chemical recycling of novel polyolefin materials.

Recent Advances in Solid-State Modification for Thermoplastic Polymers: A Comprehensive Review

This review introduces groundbreaking insights in polymer science, specifically spotlighting a novel review of the solid-state modification (SSM) approach of thermoplastic polymers, a method not extensively explored. Unlike traditional melt polymer modification, SSM stands out by incorporating monomers or oligomers into the amorphous phase of polymers through innovative exchange reactions. The background of the study places thermoplastics within the context of their increased use over the past century, highlighting their versatility in various applications and the associated environmental and health concerns due to certain additives. The results section outlines the unique aspects of SSM and its increasing recognition for its potential to enhance material performance in areas such as catalysts and composites. It also discusses the application of SSM in modifying different thermoplastic polymers, highlighting various studies demonstrating the method's effectiveness in altering polymer properties. Finally, this work emphasizes SSM's importance in environmental sustainability and its potential in the recycling and upcycling of plastic materials. It acknowledges the challenges and future perspectives in the field, particularly regarding the scalability of SSM techniques for industrial applications and their role in advancing a circular economy in the polymer industry.

The processes and transport fluxes of land-based macroplastics and microplastics entering the ocean via rivers

Approximately 80% of marine plastic waste originates from land-based sources and enters oceans through rivers. Hence, to create effective regulations, it is crucial to thoroughly examine the processes by which land-based plastic waste flows into marine environments. To this end, this review covers the complete journey of macro- and microplastics from their initial input into rivers to their ultimate release into oceans. Here, we also discuss the primary influencing factors and current popular research topics. Additionally, the principles, applicability, accuracy, uncertainty, and potential improvement of the standard methods used for flux estimation at each stage are outlined. Emission estimates of land-based macro- and microplastics are typically assessed using the emission factor approach, coefficient accounting approach, or material flow analysis. Accurately estimating mismanaged plastic waste is crucial for reducing uncertainty in the macroplastic emission inventory. In our review of the processes by which land-originating plastics enter rivers, we categorized them into two major types: point-source and diffuse-source pollution. Land surface hydrological models simulate transport from diffuse sources to rivers, necessitating further research. Riverine (micro)plastic flux to the ocean is often estimated using monitoring statistics and watershed hydrological models at the watershed scale; however, standardized monitoring methods have not yet been established. At the global scale, algorithms based on river datasets are often used, which require further improvements in river data selection and microplastic number-mass conversion factors. Furthermore, the article summarizes the accuracy and sources of uncertainty of various methods. Future research efforts should focus on quantifying and mitigating uncertainties in resultant projections. Overall, this review deepens our understanding of the processes by which land-based plastic waste enters the ocean and helps scholars efficiently select or improve relevant methods when studying land-ocean transport fluxes.

An inversion model of microplastics abundance based on satellite remote sensing: a case study in the Bohai Sea

Nowadays, microplastics (MPs) as emerging contaminants have posed great risks to marine ecosystems and human health. However, non-continuous field sampling data makes it difficult to meet the needs of scientific research and pollution control of marine MPs. Consequently, the development of rapid monitoring techniques for marine MPs to achieve efficient acquisition of data is increasingly essential. Remote sensing technology provides a convenient and effective tool for monitoring and mapping marine MPs pollution. Therefore, we established an inversion model based on multiple regression by combining the remote sensing data and the measured data to predict the MPs pollution status in the Bohai Sea. The feature variables of a model are crucial to the prediction, and we proposed three methods of variable selection, namely successive projections algorithm (SPA), band combination method, and remote sensing index method. By comparing accuracy evaluation metrics, an approach based on SPA was selected to analyze the abundance and spatio-temporal distribution of MPs in the Bohai Sea in 2022. The determination coefficient of the SPA model is 0.75, and the root mean square error is 0.38 items/m3. The error of the model is within an acceptable range. It was found that the MPs abundance on the sea surface of the Bohai Sea varied significantly in different seasons and regions. This study indicates that satellite remote sensing technology has great potential in monitoring marine MPs.

From Fundamental Amyloid Protein Self-Assembly to Development of Bioplastics

Proteins can self-assemble into a range of nanostructures as a result of molecular interactions. Amyloid nanofibrils, as one of them, were first discovered with regard to the relevance of neurodegenerative diseases but now have been exploited as building blocks to generate multiscale materials with designed functions for versatile applications. This review interconnects the mechanism of amyloid fibrillation, the current approaches to synthesizing amyloid protein-based materials, and the application in bioplastic development. We focus on the fundamental structures of self-assembled amyloid fibrils and how external factors can affect protein aggregation to optimize the process. Protein self-assembly is essentially the autonomous congregation of smaller protein units into larger, organized structures. Since the properties of the self-assembly can be manipulated by changing intrinsic factors and external conditions, protein self-assembly serves as an excellent building block for bioplastic development. Building on these principles, general processing methods and pathways from raw protein sources to mature state materials are proposed, providing a guide for the development of large-scale production. Additionally, this review discusses the diverse properties of protein-based amyloid nanofibrils and how they can be utilized as bioplastics. The economic feasibility of the protein bioplastics is also compared to conventional plastics in large-scale production scenarios, supporting their potential as sustainable bioplastics for future applications.