The Regulation of Cellulose Biosynthesis in Plants

Detection of Heavy Metal Copper Stress in Apple Rootstocks Using Surface-Enhanced Raman Spectroscopy

Excessive use of copper (Cu) chemicals has led to soil contamination. This study utilized surface-enhanced Raman spectroscopy (SERS) to investigate the effects of 10 commonly encountered concentrations of Cu stress in orchards on apple rootstocks. Spectral preprocessing methods were employed to eliminate baseline drift and fluorescence background interference from the Raman spectra, while data augmentation techniques were incorporated to develop a one-dimensional stacked autoencoder convolutional neural network (1D-SAE-CNN) for classifying Cu stress levels, resulting in evaluation indices greater than 0.9. Scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) quantified Cu distribution in root, stem, and leaf tissues, while micro-Raman imaging visualized lignin, cellulose, and pigments under Cu stress. The results indicate that SERS combined with a deep learning model enables rapid and accurate differentiation of Cu stress levels in apple rootstocks in orchards, while SEM-EDS and micro-Raman imaging techniques reveal the migration effect of Cu2+ within apple rootstock tissues and the ″low concentration promotion, high concentration inhibition″ effect of Cu on apple rootstock growth. Therefore, this approach showcases rapid and accurate detection of heavy metal Cu stress in apple rootstock tissues and has great potential for analyzing various types of heavy metal pollution in agricultural orchard ecosystems.

Crucial Roles of Brassinosteroids in Cell Wall Composition and Structure Across Species: New Insights and Biotechnological Applications

Brassinosteroids (BR) are steroidal phytohormones essential for plant growth, development, and stress resistance. They fulfil this role partially by modulating cell wall structure and composition through the control of gene expression involved in primary and secondary cell wall biosynthesis and metabolism. This affects the deposition of cellulose, lignin, and other components, and modifies the inner architecture of the wall, allowing it to adapt to the developmental status and environmental conditions. This review focuses on the effects that BR exerts on the main components of the cell wall, cellulose, hemicellulose, pectin and lignin, in multiple and relevant plant species. We summarize the outcomes that result from modifying cell wall components by altering BR gene expression, applying exogenous BR and utilizing natural variability in BR content and describing new roles of BR in cell wall structure. Additionally, we discuss the potential use of BR to address pressing needs, such as increasing crop yield and quality, enhancing stress resistance and improving wood production through cell wall modulation.

Nitric oxide mitigates cadmium stress by promoting the biosynthesis of cell walls in Robinia pseudoacacia roots

Cadmium (Cd) pollution is a growing concern worldwide, because it threatens human health through the food chain. Woody plants, such as the pioneer species black locust (Robinia pseudoacacia L.), are widely used in phytoremediation of Cd-contaminated soils, but strongly differ in Cd tolerance. Nitric oxide (NO), a highly reactive gas of biogenic and anthropogenic origin, has been shown to protect plants to Cd exposure. We investigated the protective mechanism of NO against Cd toxicity in black locust using physiological, transcriptomic and metabolomic approaches. We studied the correlation between cell wall traits, genes, and metabolites. The findings indicated that NO improved the growth of black locust under Cd exposure and elevated the fraction of Cd in the cell wall. NO increased cell wall thickness by stimulating the biosynthesis of pectin, cellulose, hemicellulose, and lignin. Transcriptomic and metabolomic analyses demonstrated that NO upregulated genes related to root cell wall biosynthesis and increased the accumulation of related metabolites, thereby increasing the Cd resistance of black locust. Our results elucidated a molecular mechanism underlying NO-mediated Cd tolerance in black locust and provided novel insights for phytoremediation of Cd-polluted soils by woody plants.

Insights into Molecular Mechanism of Secondary Xylem Rapid Growth in Salix psammophila

Salix psammophila C. Wang & C. Y. Yang is an important windbreak and sand-fixing shrub species in Northwest China, with excellent characteristics such as resistance to drought, wind, and sand. S. psammophila needs to be stubbed flat after several years of growth to continue to grow, otherwise, its growth rate will slow down and even begin to die. To understand the genetic regulatory mechanism of secondary growth in S. psammophila, cell structure and transcriptome analysis were performed on the secondary xylem and secondary phloem of stems. The results showed that the secondary xylem and the secondary phloem of S. psammophila were well developed at 1, 2, and 3-year-old stages, and the secondary growth changes mainly occurred in the secondary xylem at the 2 to 3-year-old stage, with a faster growth rate. The CSE2 and CSE1 genes that regulate CSE (caffeoyl shikimate esterase) have high sequence similarity (92% and 93%) with the CSE2 and CSE1 genes of the genus Populus, respectively, and regulate lignin biosynthesis. Notably, the expression levels of these two genes decreased in the secondary xylem of 3-year-old S. psammophila, indicating that the rapid growth of S. psammophila may be related to lignin biosynthesis. Weighted gene co-expression network analysis (WGCNA) was utilized to screen candidate TFs and genes involved in the secondary growth processes of S. psammophila, which were categorized into six co-expression modules. A total of 79 genes were selected from these co-expression modules, and co-expression network maps of the genes were constructed. The results indicate that the secondary growth of S. psammophila was regulated by a TF regulatory network. Interestingly, PLATZ TFs were involved in the rapid secondary growth and stress tolerance in S. psammophila. This hints that S. psammophila may promote secondary growth by increasing stress tolerance.

A cell fractionation and quantitative proteomics pipeline to enable functional analyses of cotton fiber development

Cotton fibers are aerial trichoblasts that employ a highly polarized diffuse growth mechanism to emerge from the developing ovule epidermis. After executing a complicated morphogenetic program, the cells reach lengths over 2 cm and serve as the foundation of a multi-billion-dollar textile industry. Important traits such as fiber diameter, length, and strength are defined by the growth patterns and cell wall properties of individual cells. At present, the ability to engineer fiber traits is limited by our lack of understanding regarding the primary controls governing the rate, duration, and patterns of cell growth. To gain insights into the compartmentalized functions of proteins in cotton fiber cells, we developed a label-free liquid chromatography mass spectrometry method for systems-level analyses of fiber proteome. Purified fibers from a single locule were used to fractionate the fiber proteome into apoplast (APOT), membrane-associated (p200), and crude cytosolic (s200) fractions. Subsequently, proteins were identified, and their localizations and potential functions were analyzed using combinations of size exclusion chromatography, statistical and bioinformatic analyses. This method had good coverage of the p200 and APOT fractions, the latter of which was dominated by proteins associated with particulate membrane-enclosed compartments. The apoplastic proteome was diverse, the proteins were not degraded, and some displayed distinct multimerization states compared to their cytosolic pool. This quantitative proteomic pipeline can be used to improve coverage and functional analyses of the cotton fiber proteome as a function of developmental time or differing genotypes.

Identification and characterization of the auxin-response factor family in moso bamboo reveals that PeARF41 negatively regulates second cell wall formation

Auxin response factors (ARFs) are key transcriptional factors mediating the transcriptional of auxin-related genes that play crucial roles in a range of plant metabolic activities. The characteristics of 47 PeARFs, identified in moso bamboo and divided into three classes, were evaluated. Structural feature analysis showed that intron numbers ranged from 3 to 14, while Motif 1, 2, 7 and 10 were highly conserved, altogether forming DNA-binding and ARF domains. Analysis of RNA-seq from different tissues revealed that PeARFs showed tissue-specificity. Additionally, abundant hormone-response and stress-related elements were enriched in promoters of PeARFs, supporting the hypothesis that the expression of PeARFs was significantly activated or inhibited by ABA and cold treatments. Further, PeARF41 overexpression inhibited SCW formation by reducing hemicellulose, cellulose and lignin contents. Moreover, a co-expression network, containing 28 genes with PeARF41 at its core was predicted, and the results of yeast one hybridization (Y1H), electrophoretic mobility shift assay (EMSA) and dual-luciferase (Dul-LUC) assays showed that PeARF41 bound the PeSME1 promoter to inhibit its expression. We conclude that a 'PeARF41-PeSME1' regulatory cascade mediates SCW formation. Our findings provided a solid theoretical foundation for further research on the role of PeARFs.

The GhCEWT1-GhCEWT2-GhCes4D/GhCOBL4D module orchestrates plant cell elongation and cell wall thickness

Cell elongation defines cell size and shape, whereas the cell wall supports and protects it. However, the mechanism regulating cell elongation and cell wall thickness remains unknown. Here, taking advantage of a model for both cell elongation and cell wall biogenesis, cotton fiber, we identified a basic-helix-loop-helix (bHLH) factor, GhCEWT1, that contributes to both fiber cell elongation and cell wall thickness. Loss of function of GhCEWT1 reduced the fiber length and cell wall thickness. GhCEWT1 induced transcription of GhCEWT2. We also identified two target genes of GhCEWT2, cellulose synthase 4D (GhCes4D) and COBRA-LIKE 4D (GhCOBL4D). GhCEWT2 enhanced the transcription of GhCes4D and GhCOBL4D. GhCOBL4D overexpression significantly enhanced cotton fiber cell length and cell wall thickness. Our results revealed a GhCEWT1-GhCEWT2-GhCes4D/GhCOBL4D cascade functioning in both fiber cell elongation and cell wall thickness. These findings provide a comprehensive understanding of plant cell elongation and cell wall formation, as well as a theoretical basis for boosting the biomass on Earth.

Multiprotein Complexes of Plant Glycosyltransferases Involved in Their Function and Trafficking

Plant cells utilize protein oligomerization for their functions in numerous important cellular processes. Protein-protein interactions are necessary to stabilize, optimize, and activate enzymes, as well as localize proteins to specific organelles and membranes. Glycosyltransferases-enzymes that attach sugars to polysaccharides, proteins, lipids, and RNA-across multiple plant biosynthetic processes have been demonstrated to interact with one another. The mechanisms behind these interactions are still unknown, but recent research has highlighted extensive examples of protein-protein interactions, specifically in the plant cell wall hemicellulose and pectin biosynthesis that takes place in the Golgi apparatus. In this review, we will discuss what is known so far about the interactions among Golgi-localized glycosyltransferases that are important for their functioning, trafficking, as well as structural aspects.

Metabolic and physiological functions of Patatin-like phospholipase-A in plants

Patatin-like phospholipase-A (pPLA) is a class of lipid acyl hydrolase enzymes found in both, the animal and plant kingdoms. Plant pPLAs are related to the potato tuber storage protein patatin in solanaceous plants. Despite extensive investigation of pPLA functions in the animal system, the mechanistic functional details and regulatory roles of pPLA are poorly understood in plants. In recent years, research pertaining to pPLAs has gain some momentum as some of the key members of pPLA family have been characterized functionally. These findings have provided key insights into the structural features, biochemical activities, and functional roles of plant pPLAs. In this review, we are presenting a holistic overview of pPLAs in plants and providing the latest updates on pPLA research. We have highlighted the genomic diversity and structural features of pPLAs in plants. Importantly, we have discussed the role of pPLAs in lipid metabolism, including sphingolipid metabolism, lignin and cellulose accumulation, lipid breakdown and seed oil content enhancement. Moreover, regulatory roles of pPLAs in physiological processes, such as plant stress response, plant-pathogen interactions and plant development have been discussed. This information will be critical in the biotechnological programs for crop improvement.

Tethering of cellulose synthase complex to the plasma membrane relies on the isoform of EXO70A1 in Arabidopsis

In yeast and mammals, the EXO70 subunit of the exocyst complex plays a key role in mediating the tethering of exocytic vesicles to the plasma membrane (PM). In plants, however, the role of EXO70 in regulating vesicle tethering during exocytosis remains unclear. In land plants, EXO70 has undergone significant evolutionary expansion, resulting in multiple EXO70 paralogues that may allow the exocyst to form various isoforms with specific functions. Previous research in Arabidopsis has shown that generally disrupting exocyst function leads to various defects in cellulose synthase (CESA) complex (CSC) trafficking. In this study, we utilized real-time imaging combined with genetic approaches to explore the role of EXO70A1, a member of the EXO70 family in Arabidopsis, in CSC trafficking. The exo70a1 mutant exhibited a decrease in crystalline cellulose content and a reduced density of functional CSCs in the PM. Moreover, the delivery of tdTomato-CESA6 from the cortex to the PM was compromised in the mutant, leading to the accumulation of CSC vesicles at the cell cortex. However, the velocity of tdTomato-CESA6 in the PM was unaffected in exo70a1. These findings suggest that EXO70A1 has a specific role in tethering CSCs to the PM.

COBRA-LIKE 9 modulates cotton cell wall development via regulating cellulose deposition

Plant cell walls are complex and dynamic cellular structures critical for plant growth, development, physiology, and adaptation. Cellulose is one of the most important components of the cell wall. However, how cellulose microfibrils deposit and assemble into crystalline cellulose remains elusive. The COBRA-LIKE plant-specific protein family plays a vital role in modulating the deposition and orientation of cellulose microfibril in plant cell walls. Here, we investigate the role of GhCOBL9 in cotton (Gossypium hirsutum) fiber development, an ideal model for studying cell elongation and cell wall thickening. The expression period of GhCOBL9 is consistent with the thickening stage of the secondary wall of cotton fibers. Overexpression of GhCOBL9 results in increased cellulose content in the cell wall and produces shorter, thicker, and stronger fibers, while RNA interference (RNAi)-mediated downregulation of GhCOBL9 leads to the opposite phenotypes, indicating its crucial role in cell wall development. Subcellular localization and binding activity assays reveal that GhCOBL9 targets the cell wall and binds to crystalline cellulose with high affinity. Transcriptomic analysis of GhCOBL9 transgenic lines uncovers expression alterations in genes related to cellulose and monosaccharide biosynthesis. Furthermore, we identify a fasciclin-like arabinogalactan protein 9 (GhFLA9) as an interacting partner of GhCOBL9 to modulate cell wall development. Additionally, the R2R3-MYB transcription factor GhMYB46-5 activates GhCOBL9 expression by binding to the MYB46-responsive cis-regulatory element in the GhCOBL9 promoter. These findings broaden our knowledge of COBL function in modulating plant cell wall development.

Heterogeneity in Mechanical Properties of Plant Cell Walls

The acquisition and utilization of cell walls have fundamentally shaped the plant lifestyle. While the walls provide mechanical strength and enable plants to grow and occupy a three-dimensional space, successful sessile life also requires the walls to undergo dynamic modifications to accommodate size and shape changes accurately. Plant cell walls exhibit substantial mechanical heterogeneity due to the diverse polysaccharide composition and different development stages. Here, we review recent research advances, both methodological and experimental, that shed new light on the architecture of cell walls, with a focus on the mechanical heterogeneity of plant cell walls. Facilitated by advanced techniques and tools, especially atomic force microscopy (AFM), research efforts over the last decade have contributed to impressive progress in our understanding of how mechanical properties are associated with cell growth. In particular, the pivotal importance of pectin, the most complex wall polysaccharide, in wall mechanics is rapidly emerging. Pectin is regarded as an important determinant for establishing anisotropic growth patterns of elongating cells. Altogether, the diversity of plant cell walls can lead to heterogeneity in the mechanical properties, which will help to reveal how mechanical factors regulate plant cell growth and organ morphogenesis.

GhCASPL1 regulates secondary cell wall thickening in cotton fibers by stabilizing the cellulose synthase complex on the plasma membrane

Cotton (Gossypium hirsutum) fibers are elongated single cells that rapidly accumulate cellulose during secondary cell wall (SCW) thickening, which requires cellulose synthase complex (CSC) activity. Here, we describe the CSC-interacting factor CASPARIAN STRIP MEMBRANE DOMAIN-LIKE1 (GhCASPL1), which contributes to SCW thickening by influencing CSC stability on the plasma membrane. GhCASPL1 is preferentially expressed in fiber cells during SCW biosynthesis and encodes a MARVEL domain protein. The ghcaspl1 ghcaspl2 mutant exhibited reduced plant height and produced mature fibers with fewer natural twists, lower tensile strength, and a thinner SCW compared to the wild type. Similarly, the Arabidopsis (Arabidopsis thaliana) caspl1 caspl2 double mutant showed a lower cellulose content and thinner cell walls in the stem vasculature than the wild type but normal plant morphology. Introducing the cotton gene GhCASPL1 successfully restored the reduced cellulose content of the Arabidopsis caspl1 caspl2 mutant. Detergent treatments, ultracentrifugation assays, and enzymatic assays showed that the CSC in the ghcaspl1 ghcaspl2 double mutant showed reduced membrane binding and decreased enzyme activity compared to the wild type. GhCASPL1 binds strongly to phosphatidic acid (PA), which is present in much higher amounts in thickening fiber cells compared to ovules and leaves. Mutating the PA-binding site in GhCASPL1 resulted in the loss of its colocalization with GhCesA8, and it failed to localize to the plasma membrane. PA may alter membrane structure to facilitate protein-protein interactions, suggesting that GhCASPL1 and PA collaboratively stabilize the CSC. Our findings shed light on CASPL functions and the molecular machinery behind SCW biosynthesis in cotton fibers.

Exogenous silicon improved the cell wall stability by activating non-structural carbohydrates and structural carbohydrates metabolism in salt and drought stressed Glycyrrhiza uralensis stem

The plant cell wall is a crucial barrier against environmental stress, mainly composed of lignin and carbohydrates such as cellulose, hemicellulose, and pectin. This study explored the direct regulatory mechanism of silicon (Si) on cell wall components of Glycyrrhiza uralensis (G. uralensis) stems under salt and drought (S + D) stress and the indirect regulatory mechanism of non-structural carbohydrates on structural carbohydrates, mediated by uridine diphosphate glucose (UDPG), through joint physiological, biochemical, and transcriptomic analyses. Under S + D stress, Si increased the contents of cell wall components, altered the structure of cell wall, and directly promoted cell wall re-construction by regulating gene expression levels and enzyme activities related to cell wall biosynthesis. Meanwhile, Si facilitated the accumulation of carbohydrates by regulating enzyme activities and gene expression levels in the anabolic pathway of polysaccharides, thereby promoting UDPG conversion and indirectly providing substrates for cell wall synthesis. In conclusion, Si directly and indirectly facilitates the synthesis of cell wall components by regulating both cell wall metabolism and non-structural carbohydrates metabolism, thus reinforcing the cell wall, enhancing its stability, and improving the salt and drought tolerance of G. uralensis stems.

Genetic linkage analysis of stable QTLs in Gossypium hirsutum RIL population revealed function of GhCesA4 in fiber development

INTRODUCTION

Upland cotton is an important allotetrapolyploid crop providing natural fibers for textile industry. Under the present high-level breeding and production conditions, further simultaneous improvement of fiber quality and yield is facing unprecedented challenges due to their complex negative correlations.

OBJECTIVES

The study was to adequately identify quantitative trait loci (QTLs) and dissect how they orchestrate the formation of fiber quality and yield.

METHODS

A high-density genetic map (HDGM) based on an intraspecific recombinant inbred line (RIL) population consisting of 231 individuals was used to identify QTLs and QTL clusters of fiber quality and yield traits. The weighted gene correlation network analysis (WGCNA) package in R software was utilized to identify WGCNA network and hub genes related to fiber development. Gene functions were verified via virus-induced gene silencing (VIGS) and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 strategies.

RESULTS

An HDGM consisting of 8045 markers was constructed spanning 4943.01 cM of cotton genome. A total of 295 QTLs were identified based on multi-environmental phenotypes. Among 139 stable QTLs, including 35 newly identified ones, seventy five were of fiber quality and 64 yield traits. A total of 33 QTL clusters harboring 74 QTLs were identified. Eleven candidate hub genes were identified via WGCNA using genes in all stable QTLs and QTL clusters. The relative expression profiles of these hub genes revealed their correlations with fiber development. VIGS and CRISPR/Cas9 edition revealed that the hub gene cellulose synthase 4 (GhCesA4, GH_D07G2262) positively regulate fiber length and fiber strength formation and negatively lint percentage.

CONCLUSION

Multiple analyses demonstrate that the hub genes harbored in the QTLs orchestrate the fiber development. The hub gene GhCesA4 has opposite pleiotropic effects in regulating trait formation of fiber quality and yield. The results facilitate understanding the genetic basis of negative correlation between cotton fiber quality and yield.

The fnr-like mutants confer isoxaben tolerance by initiating mitochondrial retrograde signalling

Isoxaben is a pre-emergent herbicide used to control broadleaf weeds. While the phytotoxic mechanism is not completely understood, isoxaben interferes with cellulose synthesis. Certain mutations in cellulose synthase complex proteins can confer isoxaben tolerance; however, these mutations can cause compromised cellulose synthesis and perturbed plant growth, rendering them unsuitable as herbicide tolerance traits. We conducted a genetic screen to identify new genes associated with isoxaben tolerance by screening a selection of Arabidopsis thaliana T-DNA mutants. We found that mutations in a FERREDOXIN-NADP(+) OXIDOREDUCTASE-LIKE (FNRL) gene enhanced tolerance to isoxaben, exhibited as a reduction in primary root stunting, reactive oxygen species accumulation and ectopic lignification. The fnrl mutant did not exhibit a reduction in cellulose levels following exposure to isoxaben, indicating that FNRL operates upstream of isoxaben-induced cellulose inhibition. In line with these results, transcriptomic analysis revealed a highly reduced response to isoxaben treatment in fnrl mutant roots. The fnrl mutants displayed constitutively induced mitochondrial retrograde signalling, and the observed isoxaben tolerance is partially dependent on the transcription factor ANAC017, a key regulator of mitochondrial retrograde signalling. Moreover, FNRL is highly conserved across all plant lineages, implying conservation of its function. Notably, fnrl mutants did not show a growth penalty in shoots, making FNRL a promising target for biotechnological applications in breeding isoxaben tolerance in crops.

Deciphering the Genetic Basis of Kernel Composition in a Maize Association Panel

The primary objective in contemporary maize breeding is to pursue high quality alongside high yield. Deciphering the genetic basis of natural variation in starch, protein, oil, and fiber contents is essential for manipulating kernel composition, thereby enhancing the kernel quality and meeting growing demands. Here, we identified 12 to 88 statistically significant loci associated with kernel composition traits through a genome-wide association study (GWAS) using a panel of 212 diverse inbred lines. A regional association study pinpointed numerous causal candidate genes at these loci. Coexpression and protein-protein interaction network analyses of candidate genes revealed several causal genes directly or indirectly involved in the metabolic processes related to kernel composition traits. Subsequent mutant experiment revealed that nonsense mutations in ZmTIFY12 affect starch, protein, and fiber content, whereas nonsense mutations in ZmTT12 affect starch, protein, and oil content. These findings provide valuable guidance for improving kernel quality in maize breeding efforts.

Genetic Evidence of SpGH9A3 in Leaf Morphology Variation of Spathiphyllum 'Mojo'

Leaves play a crucial role as ornamental organs in Spathiphyllum, exhibiting distinct differences across various Spathiphyllum varieties. Leaf development is intricately linked to processes of cell proliferation and expansion, with cell morphology often regulated by plant cell walls, primarily composed of cellulose. Alterations in cellulose content can impact cell morphology, subsequently influencing the overall shape of plant organs. Although cellulases have been shown to affect cellulose levels in plant cells, genetic evidence linking them to the regulation of leaf shape remains limited. This study took the leaves of Spathiphyllum 'Mojo' and its somatic variants as the research objects. We screened four cellulase gene family members from the transcriptome and then measured the leaf cellulose content, cellulase activity, and expression levels of cellulase-related genes. Correlation analysis pinpointed the gene SpGH9A3 as closely associated with leaf shape variations in the mutant. Green fluorescent fusion protein assays revealed that the SpGH9A3 protein was localized to the cell membrane. Notably, the expression of the SpGH9A3 gene in mutant leaves peaked during the early spread stage, resulting in smaller overall leaf size and reduced cellulose content upon overexpression in Arabidopsis.

Genome-Wide Identification of a Maize Chitinase Gene Family and the Induction of Its Expression by Fusarium verticillioides (Sacc.) Nirenberg (1976) Infection

Maize chitinases are involved in chitin hydrolysis. Chitinases are distributed across various organisms including animals, plants, and fungi and are grouped into different glycosyl hydrolase families and classes, depending on protein structure. However, many chitinase functions and their interactions with other plant proteins remain unknown. The economic importance of maize (Zea mays L.) makes it relevant for studying the function of plant chitinases and their biological roles. This work aims to identify chitinase genes in the maize genome to study their gene structure, family/class classification, cis-related elements, and gene expression under biotic stress, such as Fusarium verticillioides infection. Thirty-nine chitinase genes were identified and found to be distributed in three glycosyl hydrolase (GH) families (18, 19 and 20). Likewise, the conserved domains and motifs were identified in each GH family member. The identified cis-regulatory elements are involved in plant development, hormone response, defense, and abiotic stress response. Chitinase protein-interaction network analysis predicted that they interact mainly with cell wall proteins. qRT-PCR analysis confirmed in silico data showing that ten different maize chitinase genes are induced in the presence of F. verticillioides, and that they could have several roles in pathogen infection depending on chitinase structure and cell wall localization.

Botrytis cinerea causes different plant responses in grape (Vitis vinifera) berries during noble and grey rot: diverse metabolism versus simple defence

The complexity of the interaction between the necrotrophic pathogen Botrytis cinerea and grape berries (Vitis vinifera spp.) can result in the formation of either the preferred noble rot (NR) or the loss-making grey rot (GR), depending on the prevailing climatic conditions. In this study, we focus on the functional gene set of V. vinifera by performing multidimensional scaling followed by differential expression and enrichment analyses. The aim of this study is to identify the differences in gene expression between grape berries in the phases of grey rot, noble rot, and developing rot (DR, in its early stages) phases. The grapevine transcriptome at the NR phase was found to exhibit significant differences from that at the DR and GR stages, which displayed strong similarities. Similarly, several plant defence-related pathways, including plant-pathogen interactions as hypersensitive plant responses were found to be enriched. The results of the analyses identified a potential plant stress response pathway (SGT1 activated hypersensitive response) that was found to be upregulated in the GR berry but downregulated in the NR berry. The study revealed a decrease in defence-related in V. vinifera genes during the NR stages, with a high degree of variability in functions, particularly in enriched pathways. This indicates that the plant is not actively defending itself against Botrytis cinerea, which is otherwise present on its surface with high biomass. This discrepancy underscores the notion that during the NR phase, the grapevine and the pathogenic fungi interact in a state of equilibrium. Conversely the initial stages of botrytis infection manifest as a virulent fungus-plant interaction, irrespective of whether the outcome is grey or noble rot.

Reshaping the Primary Cell Wall: Dual Effects on Plant Resistance to Ralstonia solanacearum and Heat Stress Response

Temperature elevation drastically affects plant defense responses to Ralstonia solanacearum and inhibits the major source of resistance in Arabidopsis thaliana, which is mediated by the receptor pair RRS1-R/RPS4. In this study, we refined a previous genome-wide association (GWA) mapping analysis by using a local score approach and detected the primary cell wall CESA3 gene as a major gene involved in plant response to R. solanacearum at both 27°C and an elevated temperature, 30°C. We functionally validated CESA3 as a susceptibility gene involved in resistance to R. solanacearum at both 27 and 30°C through a reverse genetic approach. We provide evidence that the cesa3mre1 mutant enhances resistance to bacterial disease and that resistance is associated with an alteration of root cell morphology conserved at elevated temperatures. However, even by forcing the entry of the bacterium to bypass the primary cell wall barrier, the cesa3mre1 mutant still showed enhanced resistance to R. solanacearum with delayed onset of bacterial wilt symptoms. We demonstrated that the cesa3mre1 mutant had constitutive expression of the defense-related gene VSP1, which is upregulated at elevated temperatures, and that during infection, its expression level is maintained higher than in the wild-type Col-0. In conclusion, this study reveals that alteration of the primary cell wall by mutating the cellulose synthase subunit CESA3 contributes to enhanced resistance to R. solanacearum, remaining effective under heat stress. We expect that these results will help to identify robust genetic sources of resistance to R. solanacearum in the context of global warming. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Stem lodging Resistance-1 controls stem strength by positively regulating the biosynthesis of cell wall components in Capsicum annuum L

Lodging presents a significant challenge in cultivating high-yield crops with extensive above-ground biomass, yet the molecular mechanisms underlying this phenomenon in the Solanaceae family remain largely unexplored. In this study, we identified a gene, CaSLR1 (Capsicum annuum Stem Lodging Resistance 1), which encodes a MYELOBLASTOSIS (MYB) family transcription factor, from a lodging-affected C. annuum EMS mutant. The suppression of CaSLR1 expression in pepper led to notable stem lodging, reduced thickness of the secondary cell wall, and decreased stem strength. A similar phenotype was observed in tomato with the knockdown of SlMYB61, the orthologous gene to CaSLR1. Further investigations demonstrated that CaNAC6, a gene involved in secondary cell wall (SCW) formation, is co-expressed with CaSLR1 and acts as a positive regulator of its expression, as confirmed through yeast one-hybrid, dual-luciferase reporter assays, and electrophoretic mobility shift assays. These findings elucidate the CaNAC6-CaSLR1 module that contributes to lodging resistance, emphasizing the critical role of CaSLR1 in the lodging resistance regulatory network.

Carbon usage in yellow-fleshed Manihot esculenta storage roots shifts from starch biosynthesis to cell wall and raffinose biosynthesis via the myo-inositol pathway

Cassava is a crucial staple crop for smallholder farmers in tropical Asia and Sub-Saharan Africa. Although high yield remains the top priority for farmers, the significance of nutritional values has increased in cassava breeding programs. A notable negative correlation between provitamin A and starch accumulation poses a significant challenge for breeding efforts. The negative correlation between starch and carotenoid levels in conventional and genetically modified cassava plants implies the absence of a direct genomic connection between the two traits. The competition among various carbon pathways seems to account for this relationship. In this study, we conducted a thorough analysis of 49 African cassava genotypes with varying levels of starch and provitamin A. Our goal was to identify factors contributing to differential starch accumulation. Considering carotenoid levels as a confounding factor in starch production, we found that yellow- and white-fleshed storage roots did not differ significantly in most measured components of starch or de novo fatty acid biosynthesis. However, genes and metabolites associated with myo-inositol synthesis and cell wall polymer production were substantially enriched in high provitamin A genotypes. These results indicate that yellow-fleshed cultivars, in comparison to their white-fleshed counterparts, direct more carbon toward the synthesis of raffinose and cell wall components. This finding is underlined by a significant rise in cell wall components measured within the 20 most contrasting genotypes for carotenoid levels. Our findings enhance the comprehension of the biosynthesis of starch and carotenoids in the storage roots of cassava.

Xylem cell size regulation is a key adaptive response to water deficit in Eucalyptus grandis

Future climatic scenarios forecast increasingly frequent droughts that will pose substantial consequences on tree mortality. In light of this, drought-tolerant eucalypts have been propagated; however, the severity of these conditions will invoke adaptive responses, impacting the commercially valuable wood properties. To determine what mechanisms govern the wood anatomical adaptive response, highly controlled drought experiments were conducted in Eucalyptus grandis W. Hill ex Maiden, with the tree physiology and transcriptome closely monitored. In response to water deficit, E. grandis displays an isohydric stomatal response to conserve water and enable stem growth to continue, albeit at a reduced rate. Maintaining gaseous exchange is likely a critical short-term response that drives the formation of hydraulically safer xylem. For instance, the development of significantly smaller fibers and vessels was found to increase cellular density, thereby promoting drought tolerance through improved functional redundancy, as well as implosion and cavitation resistance. The transcriptome was explored to identify the molecular mechanisms responsible for controlling xylem cell size during prolonged water deficit. Downregulation of genes associated with cell wall remodeling and the biosynthesis of cellulose, hemicellulose and pectin appeared to coincide with a reduction in cellular enlargement during drought. Furthermore, transcript levels of NAC and MYB transcription factors, vital for cell wall component biosynthesis, were reduced, while those linked to lignification increased. The upregulation of EgCAD and various peroxidases under water deficit did not correlate with an increased lignin composition. However, with the elevated cellular density, a higher lignin content per xylem cross-sectional area was observed, potentially enhancing hydraulic safety. These results support the requirement for higher density, drought-adapted wood as a long-term adaptive response in E. grandis, which is largely influenced by the isohydric stomatal response coupled with cellular expansion-related molecular processes.

Bottom-Up Synthesized Glucan Materials: Opportunities from Applied Biocatalysis

Linear d-glucans are natural polysaccharides of simple chemical structure. They are comprised of d-glucosyl units linked by a single type of glycosidic bond. Noncovalent interactions within, and between, the d-glucan chains give rise to a broad variety of macromolecular nanostructures that can assemble into crystalline-organized materials of tunable morphology. Structure design and functionalization of d-glucans for diverse material applications largely relies on top-down processing and chemical derivatization of naturally derived starting materials. The top-down approach encounters critical limitations in efficiency, selectivity, and flexibility. Bottom-up approaches of d-glucan synthesis offer different, and often more precise, ways of polymer structure control and provide means of functional diversification widely inaccessible to top-down routes of polysaccharide material processing. Here the natural and engineered enzymes (glycosyltransferases, glycoside hydrolases and phosphorylases, glycosynthases) for d-glucan polymerization are described and the use of applied biocatalysis for the bottom-up assembly of specific d-glucan structures is shown. Advanced material applications of the resulting polymeric products are further shown and their important role in the development of sustainable macromolecular materials in a bio-based circular economy is discussed.

Five amino acid mismatches in the zinc-finger domains of Cellulose Synthase 5 and Cellulose Synthase 6 cooperatively modulate their functional properties by controlling homodimerization in Arabidopsis

Cellulose synthase 5 (CESA5) and CESA6 are known to share substantial functional overlap. In the zinc-finger domain (ZN) of CESA5, there are five amino acid (AA) mismatches when compared to CESA6. These mismatches in CESA5 were replaced with their CESA6 counterparts one by one until all were replaced, generating nine engineered CESA5s. Each N-terminal enhanced yellow fluorescent protein-tagged engineered CESA5 was introduced to prc1-1, a cesa6 null mutant, and resulting mutants were subjected to phenotypic analyses. We found that five single AA-replaced CESA5 proteins partially rescue the prc1-1 mutant phenotypes to different extents. Multi-AA replaced CESA5s further rescued the mutant phenotypes in an additive manner, culminating in full recovery by CESA5G43R + S49T+S54P+S80A+Y88F. Investigations in cellulose content, cellulose synthase complex (CSC) motility, and cellulose microfibril organization in the same mutants support the results of the phenotypic analyses. Bimolecular fluorescence complementation assays demonstrated that the level of homodimerization in every engineered CESA5 is substantially higher than CESA5. The mean fluorescence intensity of CSCs carrying each engineered CESA5 fluctuates with the degree to which the prc1-1 mutant phenotypes are rescued by introducing a corresponding engineered CESA5. Taken together, these five AA mismatches in the ZNs of CESA5 and CESA6 cooperatively modulate the functional properties of these CESAs by controlling their homodimerization capacity, which in turn imposes proportional changes on the incorporation of these CESAs into CSCs.

The transcriptional regulation of a putative hemicellulose gene, PtrPARVUS2 in poplar

The plant cell wall serves as a critical interface between the plant and its environment, offering protection against various stresses and contributing to biomass production. Hemicellulose is one of the major components of the cell wall, and understanding the transcriptional regulation of its production is essential to fully understanding cell wall formation. This study explores the regulatory mechanisms underlying one of the genes involved in hemicellulose biosynthesis, PtrPARVUS2. Six transcription factors (TFs) were identified from a xylem-biased library to negatively regulate PtrPARVUS2 expression. These TFs, belonging to diverse TF families, were confirmed to bind to specific cis-elements in the PtrPARVUS2 promoter region, as validated by Yeast One-Hybrid (Y1H) assays, transient expression analysis, and Chromatin Immunoprecipitation sequencing (ChIP-seq) assays. Furthermore, motif analysis identified putative cis-regulatory elements bound by these TFs, shedding light on the transcriptional regulation of SCW biosynthesis genes. Notably, several TFs targeted genes encoding uridine diphosphate glycosyltransferases (UGTs), crucial enzymes involved in hemicellulose glycosylation. Phylogenetic analysis of UGTs regulated by these TFs highlighted their diverse roles in modulating hemicellulose synthesis. Overall, this study identifies a set of TFs that regulate PARVUS2 in poplar, providing insights into the intricate coordination of TFs and PtrPARVUS2 in SCW formation. Understanding these regulatory mechanisms enhances our ability to engineer plant biomass for tailored applications, including biofuel production and bioproduct development.

Genome-Wide Identification and Hormone Response Analysis of the COBL Gene Family in Barley

Barley (Hordeum vulgare L.), a diverse cereal crop, exhibits remarkable versatility in its applications, ranging from food and fodder to industrial uses. The content of cellulose in barley is significantly influenced by the COBRA genes, which encode the plant glycosylphosphatidylinositol (GPI)-anchored protein (GAP) that plays a pivotal role in the deposition of cellulose within the cell wall. The COBL (COBRA-Like) gene family has been discovered across numerous species, yet the specific members of this family in barley remain undetermined. In this study, we discovered 13 COBL genes within the barley genome using bioinformatics methods, subcellular localization, and protein structure analysis, finding that most of the barley COBL proteins have a signal peptide structure and are localized on the plasma membrane. Simultaneously, we constructed a phylogenetic tree and undertook a comprehensive analysis of the evolutionary relationships. Other characteristics of HvCOBL family members, including intraspecific collinearity, gene structure, conserved motifs, and cis-acting elements, were thoroughly characterized in detail. The assessment of HvCOBL gene expression in barley under various hormone treatments was conducted through qRT-PCR analysis, revealing jasmonic acid (JA) as the predominant hormonal regulator of HvCOBL gene expression. In summary, this study comprehensively identified and analyzed the barley COBL gene family, aiming to provide basic information for exploring the members of the HvCOBL gene family and to propose directions for further research.

The plant cell wall-dynamic, strong, and adaptable-is a natural shapeshifter

Mythology is replete with good and evil shapeshifters, who, by definition, display great adaptability and assume many different forms-with several even turning themselves into trees. Cell walls certainly fit this definition as they can undergo subtle or dramatic changes in structure, assume many shapes, and perform many functions. In this review, we cover the evolution of knowledge of the structures, biosynthesis, and functions of the 5 major cell wall polymer types that range from deceptively simple to fiendishly complex. Along the way, we recognize some of the colorful historical figures who shaped cell wall research over the past 100 years. The shapeshifter analogy emerges more clearly as we examine the evolving proposals for how cell walls are constructed to allow growth while remaining strong, the complex signaling involved in maintaining cell wall integrity and defense against disease, and the ways cell walls adapt as they progress from birth, through growth to maturation, and in the end, often function long after cell death. We predict the next century of progress will include deciphering cell type-specific wall polymers; regulation at all levels of polymer production, crosslinks, and architecture; and how walls respond to developmental and environmental signals to drive plant success in diverse environments.

Golgi-localized APYRASE 1 is critical for Arabidopsis growth by affecting cell wall integrity under boron deficiency

Many nucleoside triphosphate-diphosphohydrolases (NTPDases/APYRASEs, APYs) play a key role in modulating extracellular nucleotide levels. However, the Golgi-localized APYs, which help control glycosylation, have rarely been studied. Here, we identified AtAPY1, a gene encoding an NTPDase in the Golgi apparatus, which is required for cell wall integrity and plant growth under boron (B) limited availability. Loss of function in AtAPY1 hindered cell elongation and division in root tips while increasing the number of cortical cell layers, leading to swelling of the root tip and abundant root hairs under low B stress. Further, expression pattern analysis revealed that B deficiency significantly induced AtAPY1, especially in the root meristem and stele. Fluorescent-labeled AtAPY1-GFP localized to the Golgi stack. Biochemical analysis showed that AtAPY1 exhibited a preference of UDP and GDP hydrolysis activities. Consequently, the loss of function in AtAPY1 might disturb the homoeostasis of NMP-driven NDP-sugar transport, which was closely related to the synthesis of cell wall polysaccharides. Further, cell wall-composition analysis showed that pectin content increased and borate-dimerized RG-II decreased in apy1 mutants, along with a decrease in cellulose content. Eventually, altered polysaccharide characteristics presumably cause growth defects in apy1 mutants under B deficiency. Altogether, these data strongly support a novel role for AtAPY1 in mediating responses to low B availability by regulating cell wall integrity.

Allelic variations of WAK106-E2Fa-DPb1-UGT74E2 module regulate fibre properties in Populus tomentosa

Wood formation, intricately linked to the carbohydrate metabolism pathway, underpins the capacity of trees to produce renewable resources and offer vital ecosystem services. Despite their importance, the genetic regulatory mechanisms governing wood fibre properties in woody plants remain enigmatic. In this study, we identified a pivotal module comprising 158 high-priority core genes implicated in wood formation, drawing upon tissue-specific gene expression profiles from 22 Populus samples. Initially, we conducted a module-based association study in a natural population of 435 Populus tomentosa, pinpointing PtoDPb1 as the key gene contributing to wood formation through the carbohydrate metabolic pathway. Overexpressing PtoDPb1 led to a 52.91% surge in cellulose content, a reduction of 14.34% in fibre length, and an increment of 38.21% in fibre width in transgenic poplar. Moreover, by integrating co-expression patterns, RNA-sequencing analysis, and expression quantitative trait nucleotide (eQTN) mapping, we identified a PtoDPb1-mediated genetic module of PtoWAK106-PtoDPb1-PtoE2Fa-PtoUGT74E2 responsible for fibre properties in Populus. Additionally, we discovered the two PtoDPb1 haplotypes that influenced protein interaction efficiency between PtoE2Fa-PtoDPb1 and PtoDPb1-PtoWAK106, respectively. The transcriptional activation activity of the PtoE2Fa-PtoDPb1 haplotype-1 complex on the promoter of PtoUGT74E2 surpassed that of the PtoE2Fa-PtoDPb1 haplotype-2 complex. Taken together, our findings provide novel insights into the regulatory mechanisms of fibre properties in Populus, orchestrated by PtoDPb1, and offer a practical module for expediting genetic breeding in woody plants via molecular design.

Development of hybrid biomicroparticles: cellulose exposing functionalized fusion proteins

BACKGROUND

One of the leading current trends in technology is the miniaturization of devices to the microscale and nanoscale. The highly advanced approaches are based on biological systems, subjected to bioengineering using chemical, enzymatic and recombinant methods. Here we have utilised the biological affinity towards cellulose of the cellulose binding domain (CBD) fused with recombinant proteins.

RESULTS

Here we focused on fusions with 'artificial', concatemeric proteins with preprogrammed functions, constructed using DNA FACE™ technology. Such CBD fusions can be efficiently attached to micro-/nanocellulose to form functional, hybrid bionanoparticles. Microcellulose (MCC) particles were generated by a novel approach to enzymatic hydrolysis using Aspergillus sp. cellulase. The interaction between the constructs components - MCC, CBD and fused concatemeric proteins - was evaluated. Obtaining of hybrid biomicroparticles of a natural cellulose biocarrier with proteins with therapeutic properties, fused with CBD, was confirmed. Further, biological tests on the hybrid bioMCC particles confirmed the lack of their cytotoxicity on 46BR.1 N fibroblasts and human adipose derived stem cells (ASCs). The XTT analysis showed a slight inhibition of the proliferation of 46BR.1 N fibroblasts and ACSs cells stimulated with the hybrid biomicroparticles. However, in both cases no changes in the morphology of the examined cells after incubation with the hybrid biomicroparticles' MCC were detected.

CONCLUSIONS

Microcellulose display with recombinant proteins involves utilizing cellulose, a natural polymer found in plants, as a platform for presenting or displaying proteins. This approach harnesses the structural properties of cellulose to express or exhibit various recombinant proteins on its surface. It offers a novel method for protein expression, presentation, or immobilization, enabling various applications in biotechnology, biomedicine, and other fields. Microcellulose shows promise in biomedical fields for wound healing materials, drug delivery systems, tissue engineering scaffolds, and as a component in bio-sensors due to its biocompatibility and structural properties.

Genome-wide analysis of cellulose synthase gene superfamily in Tectona grandis L.f

This study aimed to explore Cellulose synthase gene superfamily of teak, and its evolutionary relationship with homologous genes of other woody species. The incidence of evolutionary events like gene duplication and gene loss, influence of the selection pressure, and consequent adaptive functional divergence of the duplicated TgCes gene were assessed alongside it's role in wood coloration. This study identified 39 full-length non-redundant proteins belonging to CesA and Csl gene families. TgCesA and TgCsl proteins with Cellulose synthase domain repeats indicated tandem gene duplication and probable genetic variability, enabling local adaptation. Further, multi-domain protein (MYB-like DNA-binding domain and CesA domain) with maximum introns was also identified indicating gene fusion and formation of complex protein with novel functions. Phylogenetic analysis grouped the genes into seven subfamilies (CesA, CslA, CslC, CslD, CslE, CslG, and CslM) with each undergoing gene duplication and loss along their evolutionary history. Post-species gene duplications and probable neofunctionalization were identified in TgCesA and TgCsl gene families. Each subfamily was found to be under strong purifying selection with a few or no sites under positive selection. Functional divergence analysis further revealed site-specific selective constraints in CesA and Csl genes of the teak Cellulose synthase gene family. Furthermore, protein-protein interaction network analysis identified co-expression of Cellulose synthase gene with flavonoid 3',5'-hydroxylase (F3'5'H, CYP75A), involved in the biosynthesis of xylem anthocyanin compounds, probably responsible for wood coloration. This study thus offers a foundation for future research in wood formation and wood property traits specific to teak and its provenances.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-024-03927-6.

Wood of trees: Cellular structure, molecular formation, and genetic engineering

Wood is an invaluable asset to human society due to its renewable nature, making it suitable for both sustainable energy production and material manufacturing. Additionally, wood derived from forest trees plays a crucial role in sequestering a significant portion of the carbon dioxide fixed during photosynthesis by terrestrial plants. Nevertheless, with the expansion of the global population and ongoing industrialization, forest coverage has been substantially decreased, resulting in significant challenges for wood production and supply. Wood production practices have changed away from natural forests toward plantation forests. Thus, understanding the underlying genetic mechanisms of wood formation is the foundation for developing high-quality, fast-growing plantation trees. Breeding ideal forest trees for wood production using genetic technologies has attracted the interest of many. Tremendous studies have been carried out in recent years on the molecular, genetic, and cell-biological mechanisms of wood formation, and considerable progress and findings have been achieved. These studies and findings indicate enormous possibilities and prospects for tree improvement. This review will outline and assess the cellular and molecular mechanisms of wood formation, as well as studies on genetically improving forest trees, and address future development prospects.

Tuning thermoresponsive properties of carboxymethyl cellulose (CMC)-agarose composite bioinks to fabricate complex 3D constructs for regenerative medicine

3D bioprinting has emerged as a viable tool to fabricate 3D tissue constructs with high precision using various bioinks which offer instantaneous gelation, shape fidelity, and cytocompatibility. Among various bioinks, cellulose is the most abundantly available natural polymer & widely used as bioink for 3D bioprinting applications. To mitigate the demanding crosslinking needs of cellulose, it is frequently chemically modified or blended with other polymers to develop stable hydrogels. In this study, we have developed a thermoresponsive, composite bioink using carboxymethyl cellulose (CMC) and agarose in different ratios (9:1, 8:2, 7:3, 6:4, and 5:5). Among the tested combinations, the 5:5 ratio showed better gel formation at 37 °C and were further characterized for physicochemical properties. Cytocompatibility was assessed by in vitro extract cytotoxicity assay (ISO 10993-5) using skin fibroblasts cells. CMC-agarose (5:5) bioink was successfully used to fabricate complex 3D structures through extrusion bioprinting and maintained over 80 % cell viability over seven days. Finally, in vivo studies using rat full-thickness wounds showed the potential of CMC-agarose bulk and bioprinted gels in promoting skin regeneration. These results indicate the cytocompatibility and suitability of CMC-agarose bioinks for tissue engineering and 3D bioprinting applications.

Identification and expression analysis of expansin gene family in Salvia miltiorrhiza

BACKGROUND

Expansins (EXP) are important enzymes that are involved in the extension of plant cells and regulation of root configurations, which play important roles in resisting various stresses. As a model medicinal plant, Salvia miltiorrhiza is well recognized for treating coronary heart disease, myocardial infection, and other cardiovascular and cerebrovascular diseases; however, the SmEXP gene family has not yet been analyzed.

METHODS

The SmEXP family was systematically analyzed using bioinformatics. Quantitative real-time PCR was employed to analyze the tissue expression patterns of the SmEXP family, as well as its expression under abscisic acid (ABA) treatment and abiotic stress. Subcellular localization assay revealed the localization of SmEXLA1, SmEXLB1, and SmEXPA2.

RESULTS

This study identified 29 SmEXP that belonged to four different subfamilies. SmEXP promoter analysis suggested that it may be involved in the growth, development, and stress adaptation of S. miltiorrhiza. An analysis of the expression patterns of SmEXP revealed that ABA, Cu2+, and NaCl had regulatory effects on its expression. A subcellular localization assay showed that SmEXLA1 and SmEXLB1 were located on the nucleus and cell membrane, while SmEXPA2 was located on the cell wall.

CONCLUSION

For this study, the SmEXP family was systematically analyzed for the first time, which lays a foundation for further elucidating its physiological and biological functionality.

Deciphering the intricate hierarchical gene regulatory network: unraveling multi-level regulation and modifications driving secondary cell wall formation

Wood quality is predominantly determined by the amount and the composition of secondary cell walls (SCWs). Consequently, unraveling the molecular regulatory mechanisms governing SCW formation is of paramount importance for genetic engineering aimed at enhancing wood properties. Although SCW formation is known to be governed by a hierarchical gene regulatory network (HGRN), our understanding of how a HGRN operates and regulates the formation of heterogeneous SCWs for plant development and adaption to ever-changing environment remains limited. In this review, we examined the HGRNs governing SCW formation and highlighted the significant key differences between herbaceous Arabidopsis and woody plant poplar. We clarified many confusions in existing literatures regarding the HGRNs and their orthologous gene names and functions. Additionally, we revealed many network motifs including feed-forward loops, feed-back loops, and negative and positive autoregulation in the HGRNs. We also conducted a thorough review of post-transcriptional and post-translational aspects, protein-protein interactions, and epigenetic modifications of the HGRNs. Furthermore, we summarized how the HGRNs respond to environmental factors and cues, influencing SCW biosynthesis through regulatory cascades, including many regulatory chains, wiring regulations, and network motifs. Finally, we highlighted the future research directions for gaining a further understanding of molecular regulatory mechanisms underlying SCW formation.

Phosphate starvation regulates cellulose synthesis to modify root growth

In the model plant Arabidopsis (Arabidopsis thaliana), the absence of the essential macro-nutrient phosphate reduces primary root growth through decreased cell division and elongation, requiring alterations to the polysaccharide-rich cell wall surrounding the cells. Despite its importance, the regulation of cell wall synthesis in response to low phosphate levels is not well understood. In this study, we show that plants increase cellulose synthesis in roots under limiting phosphate conditions, which leads to changes in the thickness and structure of the cell wall. These changes contribute to the reduced growth of primary roots in low-phosphate conditions. Furthermore, we found that the cellulose synthase complex (CSC) activity at the plasma membrane increases during phosphate deficiency. Moreover, we show that this increase in the activity of the CSC is likely due to alterations in the phosphorylation status of cellulose synthases in low-phosphate conditions. Specifically, phosphorylation of CELLULOSE SYNTHASE 1 (CESA1) at the S688 site decreases in low-phosphate conditions. Phosphomimic versions of CESA1 with an S688E mutation showed significantly reduced cellulose induction and primary root length changes in low-phosphate conditions. Protein structure modeling suggests that the phosphorylation status of S688 in CESA1 could play a role in stabilizing and activating the CSC. This mechanistic understanding of root growth regulation under limiting phosphate conditions provides potential strategies for changing root responses to soil phosphate content.

Atomistic, macromolecular model of the Populus secondary cell wall informed by solid-state NMR

Plant secondary cell walls (SCWs) are composed of a heterogeneous interplay of three major biopolymers: cellulose, hemicelluloses, and lignin. Details regarding specific intermolecular interactions and higher-order architecture of the SCW superstructure remain ambiguous. Here, we use solid-state nuclear magnetic resonance (ssNMR) measurements to infer refined details about the structural configuration, intermolecular interactions, and relative proximity of all three major biopolymers within air-dried Populus wood. To enhance the utility of these findings and enable evaluation of hypotheses in a physics-based environment in silico, the NMR observables are articulated into an atomistic, macromolecular model for biopolymer assemblies within the plant SCW. Through molecular dynamics simulation, we quantitatively evaluate several variations of atomistic models to determine structural details that are corroborated by ssNMR measurements.

Functionalizing natural polymers to develop green adsorbents for wastewater treatment applications

The present study provides an overview of scientific developments made in the last decade in the field of green adsorbents focusing on the modifications in natural polymers and their applications such as, wastewater treatment, and ion exchange. For this purpose, an introduction to the various methods of modifying natural polymers is first given, and then the properties, application, and future priorities of green adsorbents are also discussed. Methods of modification of natural polymers under homogeneous and heterogeneous conditions using modifiers with different properties are also described. Various methods for modifying natural polymers and the use of the obtained green adsorbents are reviewed. A comparison of the sorption properties of green adsorbents based on natural polymers and other adsorbents used in industry has also been carried out. With the participation of green adsorbents based on natural polymers, the properties of treated wastewaters having toxic metal ions, organic dyes, petroleum products, and other harmful compounds was analyzed. Future perspectives on green adsorbents based on natural polymers are as also highlighted.

The damage-associated molecular pattern cellotriose alters the phosphorylation pattern of proteins involved in cellulose synthesis and trans-Golgi trafficking in Arabidopsis thaliana

We have recently demonstrated that the cellulose breakdown product cellotriose is a damage-associated molecular pattern (DAMP) which induces responses related to the integrity of the cell wall. Activation of downstream responses requires the Arabidopsis malectin domain-containing CELLOOLIGOMER RECEPTOR KINASE1 (CORK1)¹. The cellotriose/CORK1 pathway induces immune responses, including NADPH oxidase-mediated reactive oxygen species production, mitogen-activated protein kinase 3/6 phosphorylation-dependent defense gene activation, and the biosynthesis of defense hormones. However, apoplastic accumulation of cell wall breakdown products should also activate cell wall repair mechanisms. We demonstrate that the phosphorylation pattern of numerous proteins involved in the accumulation of an active cellulose synthase complex in the plasma membrane and those for protein trafficking to and within the trans-Golgi network (TGN) are altered within minutes after cellotriose application to Arabidopsis roots. The phosphorylation pattern of enzymes involved in hemicellulose or pectin biosynthesis and the transcript levels for polysaccharide-synthesizing enzymes responded barely to cellotriose treatments. Our data show that the phosphorylation pattern of proteins involved in cellulose biosynthesis and trans-Golgi trafficking is an early target of the cellotriose/CORK1 pathway.

The role of lipid-modified proteins in cell wall synthesis and signaling

The plant cell wall is a complex and dynamic extracellular matrix. Plant primary cell walls are the first line of defense against pathogens and regulate cell expansion. Specialized cells deposit a secondary cell wall that provides support and permits water transport. The composition and organization of the cell wall varies between cell types and species, contributing to the extensibility, stiffness, and hydrophobicity required for its proper function. Recently, many of the proteins involved in the biosynthesis, maintenance, and remodeling of the cell wall have been identified as being post-translationally modified with lipids. These modifications exhibit diverse structures and attach to proteins at different sites, which defines the specific role played by each lipid modification. The introduction of relatively hydrophobic lipid moieties promotes the interaction of proteins with membranes and can act as sorting signals, allowing targeted delivery to the plasma membrane regions and secretion into the apoplast. Disruption of lipid modification results in aberrant deposition of cell wall components and defective cell wall remodeling in response to stresses, demonstrating the essential nature of these modifications. Although much is known about which proteins bear lipid modifications, many questions remain regarding the contribution of lipid-driven membrane domain localization and lipid heterogeneity to protein function in cell wall metabolism. In this update, we highlight the contribution of lipid modifications to proteins involved in the formation and maintenance of plant cell walls, with a focus on the addition of glycosylphosphatidylinositol anchors, N-myristoylation, prenylation, and S-acylation.

Identification of the Key Genes Involved in Proline-Mediated Modification of Cell Wall Components in Rice Seedlings under Trivalent Chromium Exposure

Chromium (Cr) toxicity exerts a detrimental effect on various physiological, biochemical, and molecular attributes of plants including the structure and functions of cell walls. On the other hand, the exogenous application of proline (Pro) is a beneficial strategy to overcome Cr toxicity. Therefore, it is a novel strategy to find the key genes associated with cell wall composition in rice under trivalent Cr with/without Pro application. A total of 203 genes were activated in the four cell wall biosynthesis pathways under chromium stress, namely cellulose (60), hemicellulose (57), lignin (35), and pectin (51). Based on the expression abundance of microarrays, the number of differentially expressed genes, and the expression level of genes, the lignin pathway was a crucial pathway in response to Cr treatments, followed by the cellulose pathway. Through the estimation of gene expression variation factors between 'Cr' and 'Cr+Pro' treatments, OsUGP1, OsBGLU24, OsBGLU29, OsBGLU33, OsBMY1, and OsBMY2 in the cellulose pathway; OsXTH9, OsXTH10, OsXTH16, OsGAUT3, OsGAUT19, OsGAUT28, OsXTH1, OsGAUT12, and OsGAUT21 in the hemicellulose pathway; OsPAL3, OsPAL3, OsPOX1, and OsPRX77 in the lignin pathway; and OsPME25, OsPGL27, OsPME26, OsPGL9, and OsPLL12 in the pectin pathway are the key genes involved in cell wall modification during Cr exposure with exogenous Pro application. The Pro-mediated activation of these genes could be crucial players in modifying the cell wall structure and composition of rice plants under Cr stress, which needs to be further clarified.

Cell Wall Pectin Content Refers to Favored Delivery of Negatively Charged Carbon Dots in Leaf Cells

In this work, we systematically investigated how cell wall and cell wall components affect the delivery of charged carbon quantum dots (CDs, from -34 to +41 mV) to leaf cells of cucumber and Arabidopsis plants. Four different types of leaf cells in cucumber and Arabidopsis were used, i.e., protoplasts (without cell wall), isolated individual cells (cell wall hydrolyzed with pectinase), regenerated individual cells (cell wall regenerated from protoplast), and intact leaf cells (intact cell wall, in planta). Leaf cells were incubated with charged CDs (0.5 mg/mL) for 2 h. Confocal imaging results showed that protoplasts, regenerated individual cells, and leaf cells showed favored uptake of the negatively charged CDs (-34 mV) compared to the PEI (polyethylenimine) coated and positively charged carbon dots [PEI600-CDs (17 mV) and PEI10K-CDs (41 mV)], while in isolated individual cells, the trend is opposite. The results of the content of the cell wall components showed that no significant changes in the total cell wall content were found between isolated individual cells and regenerated individual cells (1.28 vs 1.11 mg/106 cells), while regenerated individual cells showed significant higher pectin content [water-soluble pectin (0.13 vs 0.06 mg/106 cells, P < 0.01), chelator-soluble pectin (0.04 vs 0.01 mg/106 cells, P < 0.01), and alkaline pectin (0.02 vs 0.01 mg/106 cells, P < 0.01)] and significant lower cellulose content (0.13 vs 0.32 mg/106 cells, P < 0.01) than the isolated individual cells. No difference of the hemicellulose content was found between isolated individual cells and regenerated individual cells (0.20 vs 0.21 mg/106 cells). Our results suggest that compared with cellulose and hemicellulose in the cell wall, the pectin is a more important factor referring to the favored uptake of negatively charged carbon dots in leaf cells. Overall, this work provides a method to study the role of cell wall components in the uptake of nanoparticles in plant cells and also points out the importance of understanding the interactions between cell barriers and nanoparticles to design nanoparticles for agricultural use.

Actomyosin and CSI1/POM2 cooperate to deliver cellulose synthase from Golgi to cortical microtubules in Arabidopsis

As one of the major components of plant cell walls, cellulose is crucial for plant growth and development. Cellulose is synthesized by cellulose synthase (CesA) complexes (CSCs), which are trafficked and delivered from the Golgi apparatus to the plasma membrane. How CesAs are released from Golgi remains largely unclear. In this study, we observed that STELLO (STL) family proteins localized at a group of small CesA-containing compartments called Small CesA compartments (SmaCCs) or microtubule-associated CesA compartments (MASCs). The STL-labeled SmaCCs/MASCs were directly derived from Golgi through a membrane-stretching process: membrane-patches of Golgi attached to cortical microtubules, which led to emergence of membrane-tails that finally ruptured to generate SmaCCs/MASCs associated with the cortical microtubules. While myosin propelled the movement of Golgi along actin filaments to stretch the tails, the CesA-microtubule linker protein, CSI1/POM2 was indispensable for the tight anchor of the membrane-tail ends at cortical microtubules. Together, our data reveal a non-canonical delivery route to the plasma membrane of a major enzyme complex in plant biology.

Cellulose assembles into helical bundles of uniform handedness in cell walls with abnormal pectin composition

Plant cells and organs grow into a remarkable diversity of shapes, as directed by cell walls composed primarily of polysaccharides such as cellulose and multiple structurally distinct pectins. The properties of the cell wall that allow for precise control of morphogenesis are distinct from those of the individual polysaccharide components. For example, cellulose, the primary determinant of cell morphology, is a chiral macromolecule that can self-assemble in vitro into larger-scale structures of consistent chirality, and yet most plant cells do not display consistent chirality in their growth. One interesting exception is the Arabidopsis thaliana rhm1 mutant, which has decreased levels of the pectin rhamnogalacturonan-I and causes conical petal epidermal cells to grow with a left-handed helical twist. Here, we show that in rhm1 the cellulose is bundled into large macrofibrils, unlike the evenly distributed microfibrils of the wild type. This cellulose bundling becomes increasingly severe over time, consistent with cellulose being synthesized normally and then self-associating into macrofibrils. We also show that in the wild type, cellulose is oriented transversely, whereas in rhm1 mutants, the cellulose forms right-handed helices that can account for the helical morphology of the petal cells. Our results indicate that when the composition of pectin is altered, cellulose can form cellular-scale chiral structures in vivo, analogous to the helicoids formed in vitro by cellulose nano-crystals. We propose that an important emergent property of the interplay between rhamnogalacturonan-I and cellulose is to permit the assembly of nonbundled cellulose structures, providing plants flexibility to orient cellulose and direct morphogenesis.

The YABBY gene SHATTERING1 controls activation rather than patterning of the abscission zone in Setaria viridis

Abscission is predetermined in specialized cell layers called the abscission zone (AZ) and activated by developmental or environmental signals. In the grass family, most identified AZ genes regulate AZ anatomy, which differs among lineages. A YABBY transcription factor, SHATTERING1 (SH1), is a domestication gene regulating abscission in multiple cereals, including rice and Setaria. In rice, SH1 inhibits lignification specifically in the AZ. However, the AZ of Setaria is nonlignified throughout, raising the question of how SH1 functions in species without lignification. Crispr-Cas9 knockout mutants of SH1 were generated in Setaria viridis and characterized with histology, cell wall and auxin immunofluorescence, transmission electron microscopy, hormonal treatment and RNA-Seq analysis. The sh1 mutant lacks shattering, as expected. No differences in cell anatomy or cell wall components including lignin were observed between sh1 and the wild-type (WT) until abscission occurs. Chloroplasts degenerated in the AZ of WT before abscission, but degeneration was suppressed by auxin treatment. Auxin distribution and expression of auxin-related genes differed between WT and sh1, with the signal of an antibody to auxin detected in the sh1 chloroplast. SH1 in Setaria is required for activation of abscission through auxin signaling, which is not reported in other grass species.

Modification of lignin composition by ectopic expressing wheat TaF5H1 led to decreased salt tolerance in transgenic Arabidopsis plants

Lignin is an important cell wall component that provides plants with mechanical support and improved tolerance to pathogen attacks. Previous studies have shown that plants rich in S-lignin content or with a higher S/G ratio always exhibit higher efficiency in the utilization of lignocellulosic biomass. Ferulate 5-hydroxylase, or coniferaldehyde 5-hydroxylase (F5H, or CAld5H), is the critical enzyme in syringyl lignin biosynthesis. Some F5Hs have been characterized in several plant species, e.g., Arabidopsis, rice, and poplar. However, information about F5Hs in wheat remains unclear. In this study, a wheat F5H gene, TaF5H1, together with its native promoter (pTaF5H1), was functionally characterized in transgenic Arabidopsis. Gus staining results showed that TaF5H1 could be expressed predominantly in the highly lignified tissues in transgenic Arabidopsis plants carrying pTaF5H1:Gus. qRT-PCR results showed that TaF5H1 was significantly inhibited by NaCl treatment. Ectopic expression of TaF5H1 driven by pTaF5H1 (i.e., pTaF5H1:TaF5H1) could increase the biomass yield, S-lignin content, and S/G ratio in transgenic Arabidopsis plants, which could also restore the traces of S-lignin in fah1-2, the Arabidopsis F5H mutant, to an even higher level than the wild type (WT), suggesting that TaF5H1 is a critical enzyme in S lignin biosynthesis, and pTaF5H1:TaF5H1 module has potential in the manipulation of S-lignin composition without any compromise on the biomass yield. However, expression of pTaF5H1:TaF5H1 also led to decreased salt tolerance compared with the WT. RNA-seq analysis showed that many stress-responsive genes and genes responsible for the biosynthesis of cell walls were differentially expressed between the seedlings harboring pTaF5H1:TaF5H1 and the WT, hinting that manipulation of the cell wall components targeting F5H may also affect the stress adaptability of the modified plants due to the interference to the cell wall integrity. In summary, this study demonstrated that the wheat pTaF5H1: TaF5H1 cassette has the potential to modulate S-lignin composition without any compromise in biomass yield in future engineering practice. Still, its negative effect on stress adaptability to transgenic plants should also be considered.

Differential subgenome expression underlies biomass accumulation in allotetraploid Pennisetum giganteum

BACKGROUND

Pennisetum giganteum (AABB, 2n = 4x = 28) is a C4 plant in the genus Pennisetum with origin in Africa but currently also grown in Asia and America. It is a crucial forage and potential energy grass with significant advantages in yield, stress resistance, and environmental adaptation. However, the mechanisms underlying these advantageous traits remain largely unexplored. Here, we present a high-quality genome assembly of the allotetraploid P. giganteum aiming at providing insights into biomass accumulation.

RESULTS

Our assembly has a genome size 2.03 Gb and contig N50 of 88.47 Mb that was further divided into A and B subgenomes. Genome evolution analysis revealed the evolutionary relationships across the Panicoideae subfamily lineages and identified numerous genome rearrangements that had occurred in P. giganteum. Comparative genomic analysis showed functional differentiation between the subgenomes. Transcriptome analysis found no subgenome dominance at the overall gene expression level; however, differentially expressed homoeologous genes and homoeolog-specific expressed genes between the two subgenomes were identified, suggesting that complementary effects between the A and B subgenomes contributed to biomass accumulation of P. giganteum. Besides, C4 photosynthesis-related genes were significantly expanded in P. giganteum and their sequences and expression patterns were highly conserved between the two subgenomes, implying that both subgenomes contributed greatly and almost equally to the highly efficient C4 photosynthesis in P. giganteum. We also identified key candidate genes in the C4 photosynthesis pathway that showed sustained high expression across all developmental stages of P. giganteum.

CONCLUSIONS

Our study provides important genomic resources for elucidating the genetic basis of advantageous traits in polyploid species, and facilitates further functional genomics research and genetic improvement of P. giganteum.

Point mutations in the catalytic domain disrupt cellulose synthase (CESA6) vesicle trafficking and protein dynamics

Cellulose, the main component of the plant cell wall, is synthesized by the multimeric cellulose synthase (CESA) complex (CSC). In plant cells, CSCs are assembled in the endoplasmic reticulum or Golgi and transported through the endomembrane system to the plasma membrane (PM). However, how CESA catalytic activity or conserved motifs around the catalytic core influence vesicle trafficking or protein dynamics is not well understood. Here, we used yellow fluorescent protein (YFP)-tagged AtCESA6 and created 18 mutants in key motifs of the catalytic domain to analyze how they affected seedling growth, cellulose biosynthesis, complex formation, and CSC dynamics and trafficking in Arabidopsis thaliana. Seedling growth and cellulose content were reduced by nearly all mutations. Moreover, mutations in most conserved motifs slowed CSC movement in the PM as well as delivery of CSCs to the PM. Interestingly, mutations in the DDG and QXXRW motifs affected YFP-CESA6 abundance in the Golgi. These mutations also perturbed post-Golgi trafficking of CSCs. The 18 mutations were divided into 2 groups based on their phenotypes; we propose that Group I mutations cause CSC trafficking defects, whereas Group II mutations, especially in the QXXRW motif, affect protein folding and/or CSC rosette formation. Collectively, our results demonstrate that the CESA6 catalytic domain is essential for cellulose biosynthesis as well as CSC formation, protein folding and dynamics, and vesicle trafficking.