Plasticity, canalization, and developmental stability of the Drosophila wing: joint effects of mutations and developmental temperature

No degradation of temperature-mediated phenotypic plasticity in Drosophila melanogaster after more than 275 generations of artificial selection on body-size

Body size is a fundamental trait that shapes a species' development and evolution. Importantly, body size can also be affected by environmental variables, especially development temperature. Here we measure phenotypic plasticity in a series of lineages that had experienced artificial selection on body size for over 275 generations. We found, despite substantial changes in overall size and sexual size dimorphism, only modest effects on developmental plasticity. Still, there were some significant, changes in the sex specific slopes of the relationship between size and rearing temperature, largely due to a reduction in plasticity in the treatment selected for small body size.

Environmental stress differentially affects phenotypic modularity and fluctuating asymmetry in generalist and specialist cactophilic Drosophila

Modularity and developmental (in)stability have the potential to influence phenotype production and, consequently, the evolutionary trajectories of species. Depending on the environmental factors involved and the buffering capacity of an organism, different developmental outcomes are expected. Cactophilic Drosophila species provide an established eco-evolutionary model with well-studied ecological conditions, making them ideal for studying these phenomena. Here, we investigated how variations in larval diet and exposure to alkaloids on primary and secondary host plants affect the degree of integration/modularity and fluctuating asymmetry (FA, a proxy for developmental instability) of wing shape in two sibling species with different degrees of specialisation: Drosophila buzzatii (generalist) and Drosophila koepferae (specialist). Additionally, we compared the anterior-posterior modular configuration with a recently proposed proximal-distal modular configuration. Our results revealed greater independence among proximal-distal modules compared to anterior-posterior modules. Moreover, we observed sex-specific responses, with males exhibiting greater susceptibility to stressful environments than females. Each species showed a particular trait pattern across treatments: D. buzzatii showed increased integration and FA when reared in a nutrient-poor, alkaloid-rich secondary host, while D. koepferae displayed similar responses in novel environments characterised by double doses of alkaloids on the secondary host plant. These findings align with the generalist-specialist paradigm, suggesting that specialists may be challenged by novel environments, whereas generalists may be more affected by stressful conditions. Our study highlights the importance of considering each part of the proximal-distal wing axis independently, and the need to consider ecological-evolutionary history when investigating the relationship between complex phenotypic traits and environmental stress.

Agricultural insect pests as models for studying stress-induced evolutionary processes

Agricultural insect pests (AIPs) are widely successful in adapting to natural and anthropogenic stressors, repeatedly overcoming population bottlenecks and acquiring resistance to intensive management practices. Although they have been largely overlooked in evolutionary studies, AIPs are ideal systems for understanding rapid adaptation under novel environmental conditions. Researchers have identified several genomic mechanisms that likely contribute to adaptive stress responses, including positive selection on de novo mutations, polygenic selection on standing allelic variation and phenotypic plasticity (e.g., hormesis). However, new theory suggests that stress itself may induce epigenetic modifications, which may confer heritable physiological changes (i.e., stress-resistant phenotypes). In this perspective, we discuss how environmental stress from agricultural management generates the epigenetic and genetic modifications that are associated with rapid adaptation in AIPs. We summarise existing evidence for stress-induced evolutionary processes in the context of insecticide resistance. Ultimately, we propose that studying AIPs offers new opportunities and resources for advancing our knowledge of stress-induced evolution.

Associations Between Developmental Stability, Canalization, and Phenotypic Plasticity in Response to Heterogeneous Experience

The processes of developmental stability, canalization, and phenotypic plasticity have ecological and evolutionary significance, and been studied extensively, but mostly separately and thus the relationships between them are not straightforward. Our objective was to better integrate these processes in the context of temporally heterogeneous environments. We did this by investigating the effects of early experience with temporal heterogeneity in water availability on associations between developmental stability, canalization, and phenotypic plasticity. We subjected eight plant species to a first round of alternating inundation and drought vs. constantly moderate water treatments (heterogeneous experience) and a second round of water conditions (to test plasticity). We measured fluctuating asymmetry (FA) in leaf size, intra- and inter-individual variation (CVintra and CVinter), and plasticity (PI) in traits and analyzed correlations between these variables across all species. Results showed little correlations between FA, CVintra and PI, several positive correlations between FA and CVinter in more stressful conditions, especially in as well as positive correlations between CVinter and PI initially and negative correlations between them later. These suggested the complexity of these relationships, which can depend on whether plasticity occurs. Greater inter-individual variation will more likely cooperate with plasticity before or during plastic response, whereas higher canalization may reflect phenotypic convergence. Both higher FA and CVintra can reflect faster growth, while CVintra may also reflect plant growth stage, and the two mechanisms should cooperate in response to environmental challenges. The complexity of these relationships suggests plants deal with environmental variation in elaborate and integrative ways which can be affected by many factors.

Deformity or variation? Phenotypic diversity in the zebrafish vertebral column

Vertebral bodies are composed of two types of metameric elements, centra and arches, each of which is considered as a developmental module. Most parts of the teleost vertebral column have a one-to-one relationship between centra and arches, although, in all teleosts, this one-to-one relationship is lost in the caudal fin endoskeleton. Deviation from the one-to-one relationship occurs in most vertebrates, related to changes in the number of vertebral centra or to a change in the number of arches. In zebrafish, deviations also occur predominantly in the caudal region of the vertebral column. In-depth phenotypic analysis of wild-type zebrafish was performed using whole-mount stained samples, histological analyses and synchrotron radiation X-ray tomographic microscopy 3D reconstructions. Three deviant centra phenotypes were observed: (i) fusion of two vertebral centra, (ii) wedge-shaped hemivertebrae and (iii) centra with reduced length. Neural and haemal arches and their spines displayed bilateral and unilateral variations that resemble vertebral column phenotypes of stem-ward actinopterygians or other gnathostomes as well as pathological conditions in extant species. Whether it is possible to distinguish variations from pathological alterations and whether alterations resemble ancestral conditions is discussed in the context of centra and arch variations in other vertebrate groups and basal actinopterygian species.

Sublethal effects of a pyrethroid insecticide on cuticle thickness, wing size and shape in the main vector Triatoma infestans

Exposure to sublethal doses of insecticide may affect biological traits in triatomines. We investigated the effects of toxicological phenotype (pyrethroid resistance status) and exposure to sublethal doses of deltamethrin on two traits of Triatoma infestans Klug (Heteroptera: Reduviidae) using a phenotypic plasticity experimental design. First-instar nymphs from 14 and 10 full-sib families from pyrethroid-susceptible and pyrethroid-resistant populations, respectively, were used. For the susceptible population, we treated first instars topically with acetone (control) or deltamethrin (treatment) once. For the resistant population, instars were treated once, twice and three times as first, third or fifth-instar nymphs, respectively. We measured cuticle thickness, wing size and wing shape of 484 emerging adults, and tested for treatment effects using mixed ANOVA and MANOVA models. Toxicological phenotype, exposure to deltamethrin and full-sib family exerted significant effects on cuticle thickness, wing size and wing shape. Adult triatomines previously treated with deltamethrin developed significantly thicker cuticles than control triatomines only in the resistant population and significantly bigger wings in both populations. Mean cuticle thickness and wing size increased with increasing exposures to deltamethrin. Exposure to sublethal doses of deltamethrin generated morphological modifications that may affect insect survival and flight dispersal, and hence may have evolutionary and epidemiological consequences.

Variable paralog expression underlies phenotype variation

Human faces are variable; we look different from one another. Craniofacial disorders further increase facial variation. To understand craniofacial variation and how it can be buffered, we analyzed the zebrafish mef2ca mutant. When this transcription factor encoding gene is mutated, zebrafish develop dramatically variable craniofacial phenotypes. Years of selective breeding for low and high penetrance of mutant phenotypes produced strains that are either resilient or sensitive to the mef2ca mutation. Here, we compared gene expression between these strains, which revealed that selective breeding enriched for high and low mef2ca paralog expression in the low- and high-penetrance strains, respectively. We found that mef2ca paralog expression is variable in unselected wild-type zebrafish, motivating the hypothesis that heritable variation in paralog expression underlies mutant phenotype severity and variation. In support, mutagenizing the mef2ca paralogs, mef2aa, mef2b, mef2cb, and mef2d demonstrated modular buffering by paralogs. Specifically, some paralogs buffer severity while others buffer variability. We present a novel, mechanistic model for phenotypic variation where variable, vestigial paralog expression buffers development. These studies are a major step forward in understanding the mechanisms of facial variation, including how some genetically resilient individuals can overcome a deleterious mutation.

Associations between leaf developmental stability, variability, canalization, and phenotypic plasticity in Abutilon theophrasti

Developmental stability, canalization, and phenotypic plasticity are the most common sources of phenotypic variation, yet comparative studies investigating the relationships between these sources, specifically in plants, are lacking. To investigate the relationships among developmental stability or instability, developmental variability, canalization, and plasticity in plants, we conducted a field experiment with Abutilon theophrasti, by subjecting plants to three densities under infertile vs. fertile soil conditions. We measured the leaf width (leaf size) and calculated fluctuating asymmetry (FA), coefficient of variation within and among individuals (CVintra and CVinter), and plasticity (PIrel) in leaf size at days 30, 50, and 70 of plant growth, to analyze the correlations among these variables in response to density and soil conditions, at each of or across all growth stages. Results showed increased density led to lower leaf FA, CVintra, and PIrel and higher CVinter in fertile soil. A positive correlation between FA and PIrel occurred in infertile soil, while correlations between CVinter and PIrel and between CVinter and CVintra were negative at high density and/or in fertile soil, with nonsignificant correlations among them in other cases. Results suggested the complexity of responses of developmental instability, variability, and canalization in leaf size, as well as their relationships, which depend on the strength of stresses. Intense aboveground competition that accelerates the decrease in leaf size (leading to lower plasticity) will be more likely to reduce developmental instability, variability, and canalization in leaf size. Increased developmental instability and intra- and interindividual variability should be advantageous and facilitate adaptive plasticity in less stressful conditions; thus, they are more likely to positively correlate with plasticity, whereas developmental stability and canalization with lower developmental variability should be beneficial for stabilizing plant performance in more stressful conditions, where they tend to have more negative correlations with plasticity.

Ecdysone coordinates plastic growth with robust pattern in the developing wing

Animals develop in unpredictable, variable environments. In response to environmental change, some aspects of development adjust to generate plastic phenotypes. Other aspects of development, however, are buffered against environmental change to produce robust phenotypes. How organ development is coordinated to accommodate both plastic and robust developmental responses is poorly understood. Here, we demonstrate that the steroid hormone ecdysone coordinates both plasticity of organ size and robustness of organ pattern in the developing wings of the fruit fly Drosophila melanogaster. Using fed and starved larvae that lack prothoracic glands, which synthesize ecdysone, we show that nutrition regulates growth both via ecdysone and via an ecdysone-independent mechanism, while nutrition regulates patterning only via ecdysone. We then demonstrate that growth shows a graded response to ecdysone concentration, while patterning shows a threshold response. Collectively, these data support a model where nutritionally regulated ecdysone fluctuations confer plasticity by regulating disc growth in response to basal ecdysone levels and confer robustness by initiating patterning only once ecdysone peaks exceed a threshold concentration. This could represent a generalizable mechanism through which hormones coordinate plastic growth with robust patterning in the face of environmental change.

Conserved and Divergent Aspects of Plasticity and Sexual Dimorphism in Wing Size and Shape in Three Diptera

The ability of powered flight in insects facilitated their great evolutionary success allowing them to occupy various ecological niches. Beyond this primary task, wings are often involved in various premating behaviors, such as the generation of courtship songs and the initiation of mating in flight. These specific functions imply special adaptations of wing morphology, as well as sex-specific wing morphologies. Although wing morphology has been extensively studied in Drosophila melanogaster (Meigen, 1830), a comprehensive understanding of developmental plasticity and the impact of sex on wing size and shape plasticity is missing for other Diptera. Therefore, we raised flies of the three Diptera species Drosophila melanogaster, Ceratitis capitata (Wiedemann, 1824) and Musca domestica (Linnaeus, 1758) at different environmental conditions and applied geometric morphometrics to analyze wing shape. Our data showed extensive interspecific differences in wing shape, as well as a clear sexual wing shape dimorphism in all three species. We revealed an impact of different rearing temperatures on wing shape in all three species, which was mostly explained by plasticity in wing size in D. melanogaster. Rearing densities had significant effects on allometric wing shape in D. melanogaster, while no obvious effects were observed for the other two species. Additionally, we did not find evidence for sex-specific response to different rearing conditions in D. melanogaster and C. capitata, while a male-specific impact of different rearing conditions was observed on non-allometric wing shape in M. domestica. Overall, our data strongly suggests that many aspects of wing morphology underly species-specific adaptations and we discuss potential developmental and functional implications of our results.

Morphological canalization, integration, and plasticity in response to population density in Abutilon theophrasti: Influences of soil conditions and growth stages

Phenotypic integration and developmental canalization have been hypothesized to constrain the degree of phenotypic plasticity, but little evidence exists, probably due to the lack of studies on the relationships among the three processes, especially for plants under different environments. We conducted a field experiment by subjecting plants of Abutilon theophrasti to three densities, under infertile and fertile soil conditions, and analyzing correlations among canalization, integration, and plasticity in a variety of measured morphological traits after 50 and 70 days, to investigate the relationships among the three variables in response to density and how these responses vary with soil conditions and growth stages. Results showed trait canalization decreased and phenotypic integration and the degree of plasticity (absolute plasticity) in traits increased with density. Phenotypic integration often positively correlated with absolute plasticity, whereas correlations between trait canalization and plasticity were insignificant in most cases, with a few positive ones between canalization and absolute plasticity at low and medium densities. As plants grew, these correlations intensified in infertile soil and attenuated in fertile soil. Our findings suggested the complexity of the relationship between canalization and plasticity: Decreased canalization is more likely to facilitate active plastic responses under more favorable conditions, whereas increased level of integration should mainly be an outcome of plastic responses. Soil conditions and growth stage may affect responses of these correlations to density via modifying plant size, competition strength, and plastic responses in traits. We also predicted that decreased canalization can be advantageous or disadvantageous, and the lack of response to stress may demonstrate a stronger ability of adaptation than passive response, thus should be adaptive plasticity as active response.

Phenotypic plasticity, canalisation and developmental stability of Triatoma infestans wings: effects of a sublethal application of a pyrethroid insecticide

BACKGROUND

Triatomine control campaigns have traditionally consisted of spraying the inside of houses with pyrethroid insecticides. However, exposure to sublethal insecticide doses after the initial application is a common occurrence and may have phenotypic consequences for survivors. Here, using Triatoma infestans (the main vector of Chagas disease in the Southern Cone of South America) as a model species, we quantified the effects of exposure to a sublethal dose of pyrethroid insecticide on wing morphology. We tested if the treatment (i) induced a plastic effect (change in the character mean); (ii) altered environmental canalisation (higher individual variation within genotypes); (iii) altered genetic canalisation (higher variation among genotypes); and (iv) altered developmental stability (higher fluctuating asymmetry [FA]).

METHODS

Each of 25 full-sib families known to be susceptible to pyrethroid insecticides were split in two groups: one to be treated with a sublethal dose of deltamethrin (insecticide-treated group) and the other to be treated with pure acetone (control group). Wings of the emerging adults were used in a landmark-based geometric morphometry analysis to extract size and shape measurements. Average differences among treatments were measured. Levels of variation among families, among individuals within families and among sides within individuals were computed and compared among treatments.

RESULTS

Wing size and shape were affected by a sublethal dose of deltamethrin. The treated insects had larger wings and a more variable wing size and shape than control insects. For both wing size and shape, genetic variation was higher in treated individuals. Individual variations and variations in FA were also greater in deltamethrin-treated insects than in control ones for all full-sib families; however, the patterns of shape variation associated with genetic variation, individual variation and FA were different.

CONCLUSIONS

Insects exposed to a sublethal dose of deltamethrin presented larger, less symmetrical and less canalised wings. The insecticide treatment jointly impaired developmental stability and genetic and environmental canalisation. The divergent patterns of shape variation suggest that the related developmental buffering processes differed at least partially. The morphological modifications induced by a single sublethal exposure to pyrethroids early in life may impinge on subsequent flight performance and consequently affect the dynamics of house invasion and reinfestation, and the effectiveness of triatomine control operations.

Transgene-mediated skeletal phenotypic variation in zebrafish

When considering relationships between genotype and phenotype we frequently ignore the fact that the genome of a typical animal, notably including that of a fish and a human, harbours a huge amount of foreign DNA. Such DNA, in the form of transposable elements, can affect genome function in a major way, and transgene biology needs to be included in our understanding of the genome. Here we examine an unexpected phenotypic effect of the chromosomally integrated transgene fli1a-F-hsp70l:Gal4VP16 that serves as a model for transgene function generally. We examine larval fras1 mutant zebrafish (Danio rerio). Gal4VP16 is a potent transcriptional activator that is already well known for toxicity and mediating unusual transcriptional effects. In the presence of the transgene, phenotypes in the neural crest-derived craniofacial skeleton, notably fusions and shape changes associated with loss of function fras1 mutations, are made more severe, as we quantify by scoring phenotypic penetrance, the fraction of mutants expressing the trait. A very interesting feature is that the enhancements are highly specific for fras1 mutant phenotypes, occurring in the apparent absence of more widespread changes. Except for the features due to the fras1 mutation, the transgene-bearing larvae appear generally healthy and to be developing normally. The transgene behaves as a genetic partial dominant: a single copy is sufficient for the enhancements, yet, for some traits, two copies may exert a stronger effect. We made new strains bearing independent insertions of the fli1a-F-hsp70l:Gal4VP16 transgene in new locations in the genome, and observed increased severities of the same phenotypes as observed for the original insertion. This finding suggests that sequences within the transgene, for example Gal4VP16, are responsible for the enhancements, rather than the effect on neighbouring host sequences (such as an insertional mutation). The specificity and biological action underlying the traits are subjects of considerable interest for further investigation, as we discuss. Our findings show that work with transgenes needs to be undertaken with caution and attention to detail.

The Pronotum of Worker of Camponotus borellii Emery (Hymenoptera: Formicidae): How Can It Affect Performance of the Head, Work Division, and Development of the Worker Caste?

In polymorphic ants, whose workers display continuous size distribution, each subcaste occupies a phenotypic space, usually with diffuse morphological boundaries. These morphological differences are closely associated to size by allometry although the environment also plays a key role that affects the fitness of the species. In Camponotus borellii Emery, the species selected as a study model, workers exhibit a continuous increase in size; geometric morphometric (GM) was used over four morphological traits: head capsule, clypeus, pronotum, and mesosoma, in order to assess (1) changes in shape, among the worker caste; (2) the influence of allometry on such changes; and (3) pronotum shape in respect to the head so as to infer which factors may influence the polymorphic development of the worker caste. The results indicated that the pronotum is organized into two highly integrated functional modules (neck and shield), corresponding to one developmental module. GM shows a similar pattern to that obtained for linear morphometry, though the worker ratio was different along continuous size distribution due to shape changes in two traits, with are also useful for delimiting modular units: (1) rounded shape of the posterior region of the head in minor workers; (2) shape of the pronotum, especially its anterior region, henceforth, neck, which widens as a consequence of the higher development of its central region, henceforth, shield, in major workers. The relevance of these results is discussed regarding functional morphology (pronotum in relation to the head), work division, and development of the worker caste.

Sex and tissue-specific evolution of developmental plasticity in Drosophila melanogaster

Developmental plasticity influences the size of adult tissues in insects. Tissues can have unique responses to environmental perturbation during development; however, the prevalence of within species evolution of tissue-specific developmental plasticity remains unclear. To address this, we studied the effects of temperature and nutrition on wing and femur size in D. melanogaster populations from a temperate and tropical region. Wings were more sensitive to temperature, while wings and femurs were equally responsive to nutrition in both populations and sexes. The temperate population was larger under all conditions, except for femurs of starved females. In line with this, we observed greater femur size plasticity in response to starvation in temperate females, leading to differences in sexual dimorphism between populations such that the slope of the reaction norm of sexual dimorphism in the tropical population was double that of the temperate population. Lastly, we observed a significant trend for steeper slopes of reaction norms in temperate than in tropical females, but not in males. These findings highlight that plasticity divergence between populations can evolve heterogeneously across sexes and tissues and that nutritional plasticity can alter sexual dimorphism in D. melanogaster.

Global constraints within the developmental program of the Drosophila wing

Organismal development is a complex process, involving a vast number of molecular constituents interacting on multiple spatio-temporal scales in the formation of intricate body structures. Despite this complexity, development is remarkably reproducible and displays tolerance to both genetic and environmental perturbations. This robustness implies the existence of hidden simplicities in developmental programs. Here, using the Drosophila wing as a model system, we develop a new quantitative strategy that enables a robust description of biologically salient phenotypic variation. Analyzing natural phenotypic variation across a highly outbred population and variation generated by weak perturbations in genetic and environmental conditions, we observe a highly constrained set of wing phenotypes. Remarkably, the phenotypic variants can be described by a single integrated mode that corresponds to a non-intuitive combination of structural variations across the wing. This work demonstrates the presence of constraints that funnel environmental inputs and genetic variation into phenotypes stretched along a single axis in morphological space. Our results provide quantitative insights into the nature of robustness in complex forms while yet accommodating the potential for evolutionary variations. Methodologically, we introduce a general strategy for finding such invariances in other developmental contexts.

Breaking Symmetry: Fluctuating Asymmetry and Geometric Morphometrics as Tools for Evaluating Developmental Instability under Diverse Agroecosystems

Fluctuating asymmetry (FA), in contrast with other asymmetries, is the bilateral asymmetry that represents small, random developmental differences between right and left sides. After nearly a century of using traditional morphometrics in the estimation of FA, geometric morphometrics (GM) now provides new insights into the use of FA as a tool, especially for assessing environmental and developmental stress. Thus, it will be possible to assess adaptation to various environmental stressors as particular triggers for unavoidable selection pressures. In this review, we describe measures of FA that use geometric morphometrics, and we include a flow chart of the methodology. We also describe how this combination (GM + FA) has been tested in several agroecosystems. Nutritional stress, temperature, chemical pollution, and population density are known stressors experienced by populations in agroecosystems.

Schizophrenia: Developmental Variability Interacts with Risk Factors to Cause the Disorder: Nonspecific Variability-Enhancing Factors Combine with Specific Risk Factors to Cause Schizophrenia

A new etiological model is proposed for schizophrenia that combines variability-enhancing nonspecific factors acting during development with more specific risk factors. This model is better suited than the current etiological models of schizophrenia, based on the risk factors paradigm, for predicting and/or explaining several important findings about schizophrenia: high co-morbidity rates, low specificity of many risk factors, and persistence in the population of the associated genetic polymorphisms. Compared with similar models, e.g., de-canalization, common psychopathology factor, sexual-selection, or differential sensitivity to the environment, this proposal is more general and integrative. Recently developed research methods have proven the existence of genetic and environmental factors that enhance developmental variability. Applying such methods to newly collected or already available data can allow for testing the hypotheses upon which this model is built. If validated, this model may change the understanding of the etiology of schizophrenia, the research models, and preventionbrk paradigms.

Genetic and environmental canalization are not associated among altitudinally varying populations of Drosophila melanogaster

Organisms are exposed to environmental and mutational effects influencing both mean and variance of phenotypes. Potentially deleterious effects arising from this variation can be reduced by the evolution of buffering (canalizing) mechanisms, ultimately reducing phenotypic variability. There has been interest regarding the conditions enabling the evolution of canalization. Under some models, the circumstances under which genetic canalization evolves are limited despite apparent empirical evidence for it. It has been argued that genetic canalization evolves as a correlated response to environmental canalization (congruence model). Yet, empirical evidence has not consistently supported predictions of a correlation between genetic and environmental canalization. In a recent study, a population of Drosophila adapted to high altitude showed evidence of genetic decanalization relative to those from low altitudes. Using strains derived from these populations, we tested if they varied for multiple aspects of environmental canalization We observed the expected differences in wing size, shape, cell (trichome) density and mutational defects between high- and low-altitude populations. However, we observed little evidence for a relationship between measures of environmental canalization with population or with defect frequency. Our results do not support the predicted association between genetic and environmental canalization.

Functional Identification of Px-fringe and Px-engrailed Genes under Heat Stress in Chlorpyrifos-Resistant and -Susceptible Plutela xylostella (Lepidoptera: Plutellidae)

In our previous research, the fitness cost of resistance of the diamondback moth (DBM), Plutella xylostella found in insecticide-resistant DBM (Rc-DBM) under heat stress was based on heavier damage to wing veins when compared to insecticide-susceptible DBM (Sm-DBM). To investigate the molecular mechanism of the damage to the veins between Rc- and Sm-DBM, the full-length sequences of two related genes involved in the development of wing veins, fringe (Px-fng) and engrailed (Px-en) of DBM were cloned, and the mRNA expressions of both Px-fng and Px-en were studied. The Px-fng and Px-en cDNA contained 1038 bp and 1152 bp of open reading frames (ORFs), respectively, which encoded a putative protein comprising 345 and 383 amino acids with a calculated molecular weight of 39.59 kDa and 42.69 kDa. Significantly down regulated expressions of Px-fng and Px-en under heat stress were found in pupae and adults of Rc-DBM compared to Sm-DBM, and a result of higher damage to wing veins in Rc-DBM under heat stress. Based on RNAi experiments, significant inhibitions on expressions of Px-fng and Px-en in both Sm-DBM and Rc-DBM were found when the pupae were infected by dsFng or dsEn. Corresponding to these, infections of dsFng or dsEn resulted in significant decrease of eclosion rate and increase malformation rate of DBM. Our results suggest that the higher damage of wing veins in DBM might be related to the heavier inhibitions of Px-fng and Px-en expression, and the Px-fng and Px-en are involved in the development of wings and veins.

Trehalose metabolism confers developmental robustness and stability in Drosophila by regulating glucose homeostasis

Organisms have evolved molecular mechanisms to ensure consistent and invariant phenotypes in the face of environmental fluctuations. Developmental homeostasis is determined by two factors: robustness, which buffers against environmental variations; and developmental stability, which buffers against intrinsic random variations. However, our understanding of these noise-buffering mechanisms remains incomplete. Here, we showed that appropriate glycemic control confers developmental homeostasis in the fruit fly Drosophila. We found that circulating glucose levels are buffered by trehalose metabolism, which acts as a glucose sink in circulation. Furthermore, mutations in trehalose synthesis enzyme (Tps1) increased the among-individual and within-individual variations in wing size. Whereas wild-type flies were largely resistant to changes in dietary carbohydrate and protein levels, Tps1 mutants experienced significant disruptions in developmental homeostasis in response to dietary stress. These results demonstrate that glucose homeostasis against dietary stress is crucial for developmental homeostasis.

Drosophila suzukii wing spot size is robust to developmental temperature

Phenotypic plasticity is an important mechanism allowing adaptation to new environments and as such it has been suggested to facilitate biological invasions. Under this assumption, invasive populations are predicted to exhibit stronger plastic responses than native populations. Drosophila suzukii is an invasive species whose males harbor a spot on the wing tip. In this study, by manipulating developmental temperature, we compare the phenotypic plasticity of wing spot size of two invasive populations with that of a native population. We then compare the results with data obtained from wild-caught flies from different natural populations. While both wing size and spot size are plastic to temperature, no difference in plasticity was detected between native and invasive populations, rejecting the hypothesis of a role of the wing-spot plasticity in the invasion success. In contrast, we observed a remarkable stability in the spot-to-wing ratio across temperatures, as well as among geographic populations. This stability suggests either that the spot relative size is under stabilizing selection, or that its variation might be constrained by a tight developmental correlation between spot size and wing size. Our data show that this correlation was lost at high temperature, leading to an increased variation in the relative spot size, particularly marked in the two invasive populations. This suggests: (a) that D. suzukii's development is impaired by hot temperatures, in agreement with the cold-adapted status of this species; (b) that the spot size can be decoupled from wing size, rejecting the hypothesis of an absolute constraint and suggesting that the wing color pattern might be under stabilizing (sexual) selection; and (c) that such sexual selection might be relaxed in the invasive populations. Finally, a subtle but consistent directional asymmetry in spot size was detected in favor of the right side in all populations and temperatures, possibly indicative of a lateralized sexual behavior.

Morphometric criteria to differentiate Drosophila suzukii (Diptera: Drosophilidae) seasonal morphs

Temperate insect species often enter diapause in preparation for overwintering. One such species is the invasive vinegar fly, Drosophila suzukii (Matsumura), which has seasonal polymorphisms, considered winter and summer morphs. To date, the morphs have been differentiated by color and size with winter morphs typically being darker and larger compared to summer morphs. ‘Dark’ and ‘large’ are subjective, however, and standardizing an identification process can ensure that the morph of interest is being accurately characterized. The goal of our research was to investigate a quantitative method to distinguish between D. suzukii morphs based on body and wing size. We reared winter and summer morph D. suzukii in the laboratory using standard procedures, and measured wing length, wing width, and hind tibia length. Additionally, we collected field D. suzukii to document the seasonal phenology of the morphs in Minnesota based on our model’s cutoff criteria. A classification and regression tree analysis were used to determine which metrics would be best for predicting field-caught D. suzukii morphs. Using laboratory-reared flies as our known morphs for the training data in the classification model we developed classification trees based on wing length and the ratio of wing length to hind tibia length. The frequency of winter and summer morphs present in the field varied based on which classification tree was used. Nevertheless, we suggest ratio of wing length to hind tibia length as the most robust criteria for differentiating D. suzukii morphs because the ratio accounts for the size variability between laboratory-reared and field-caught flies and the error rate of misclassification is reduced to 0.01 for males. The results from this work can aid in future D. suzukii research by allowing scientists to objectively differentiate the morphs, and thereby improve our understanding of the biology and phenology of seasonal morph dynamics.

Embryonic canalization and its limits-A view from temperature

Many animals are able to produce similar offspring over a range of environmental conditions. This property of the developmental process has been termed canalization-the channeling of developmental pathways to generate a stable outcome despite varying conditions. Temperature is one environmental parameter that has fundamental effects on cell physiology and biochemistry, yet developmental programs generally result in a stable phenotype under a range of temperatures. On the other hand, there are typically upper and lower temperature limits beyond which the developmental program is unable to produce normal offspring. This review summarizes data on how development is affected by temperature, particularly high temperature, in various animal species. It also brings together information on potential cell biological and developmental genetic factors that may be responsible for developmental stability in varying temperatures, and likely critical mechanisms that break down at high temperature. Also reviewed are possible means for studying temperature effects on embryogenesis and how to determine which factors are most critical at the high-temperature limits for normal development. Increased knowledge of these critical factors will point to the targets of selection under climate change, and more generally, how developmental robustness in varying environments is maintained.

Computational analysis of size, shape and structure of insect wings

The size, shape and structure of insect wings are intimately linked to their ability to fly. However, there are few systematic studies of the variability of the natural patterns in wing morphology across insects. We have assembled a dataset of 789 insect wings with representatives from 25 families and performed a comprehensive computational analysis of their morphology using topological and geometric notions in terms of (i) wing size and contour shape, (ii) vein topology, and (iii) shape and distribution of wing membrane domains. These morphospaces are complementary to existing methods for quantitatively characterizing wing morphology and are likely to be useful for investigating wing function and evolution. This Methods and Techniques paper is accompanied by a set of computational tools for open use.

This article has an associated First Person interview with the first author of the paper.

Summary: We provide a set of simple quantitative measures to compare morphological variation in size, shape, and structure of insect wings across species, families and orders.

Epistasis regulates the developmental stability of the mouse craniofacial shape

Fluctuating asymmetry is a classic concept linked to organismal development. It has traditionally been used as a measure of developmental instability, which is the inability of an organism to buffer environmental fluctuations during development. Developmental stability has a genetic component that influences the final phenotype of the organism and can lead to congenital disorders. According to alternative hypotheses, this genetic component might be either the result of additive genetic effects or a by-product of developmental gene networks. Here we present a genome-wide association study of the genetic architecture of fluctuating asymmetry of the skull shape in mice. Geometric morphometric methods were applied to quantify fluctuating asymmetry: we estimated fluctuating asymmetry as Mahalanobis distances to the mean asymmetry, correcting first for genetic directional asymmetry. We applied the marginal epistasis test to study epistasis among genomic regions. Results showed no evidence of additive effects but several interacting regions significantly associated with fluctuating asymmetry. Among the candidate genes overlapping these interacting regions we found an over-representation of genes involved in craniofacial development. A gene network is likely to be associated with skull developmental stability, and genes originally described as buffering genes (e.g., Hspa2) might occupy central positions within these networks, where regulatory elements may also play an important role. Our results constitute an important step in the exploration of the molecular roots of developmental stability and the first empirical evidence about its genetic architecture.

Plasticity Through Canalization: The Contrasting Effect of Temperature on Trait Size and Growth in Drosophila

In most ectotherms, a reduction in developmental temperature leads to an increase in body size, a phenomenon known as the temperature size rule (TSR). In Drosophila melanogaster, temperature affects body size primarily by affecting critical size, the point in development when larvae initiate the hormonal cascade that stops growth and starts metamorphosis. However, while the thermal plasticity of critical size can explain the effect of temperature on overall body size, it cannot entirely account for the effect of temperature on the size of individual traits, which vary in their thermal sensitivity. Specifically, the legs and male genitalia show reduced thermal plasticity for size, while the wings show elevated thermal plasticity, relative to overall body size. Here, we show that these differences in thermal plasticity among traits reflect, in part, differences in the effect of temperature on the rates of cell proliferation during trait growth. Counterintuitively, the elevated thermal plasticity of the wings is due to canalization in the rate of cell proliferation across temperatures. The opposite is true for the legs. These data reveal that environmental canalization at one level of organization may explain plasticity at another, and vice versa.

Morphological allometry constrains symmetric shape variation, but not asymmetry, of Halimeda tuna (Bryopsidales, Ulvophyceae) segments

Green algae of the genus Halimeda have modular siphonous thalli composed of multiple repeated segments. Morphological variation among the segments has been related to various environmental factors, which often jointly affect their size and shape. The segments are bilaterally symmetric, which means that their shape variation can be decomposed into the symmetric and asymmetric components. Asymmetric variation might reflect both environmental heterogeneity and developmental instability of morphogenetic processes during the development of segments. In the present study, we examined if segment shape in H. tuna is related to their size and if an allometric relationship can also be found with respect to their asymmetry. Relative contributions of directional and fluctuating asymmetry to the segment shape variation within individual plants were investigated at two close localities in the northern Adriatic Sea. A series of equidistant semilandmarks were set along the outline of the segments, and analyzed by geometric morphometrics using two parallel methods to optimize their final position. Symmetric variation was strongly constrained by allometry, which also explained differences between populations. Smaller segments were significantly more asymmetric, but the difference in asymmetry between populations could not be explained solely by this allometric relationship. These differences between populations might have been caused by variation in local environmental factors. We conclude that members of the genus Halimeda represent an intriguing model system for studies of morphometric symmetry and asymmetry of sessile marine organisms, including effects of allometric relationships and infraspecific variation in relation to environmental factors of the benthic coastal habitats.

Cloning of Wing-Development-Related Genes and mRNA Expression Under Heat Stress in Chlorpyrifos-Resistant and -Susceptible Plutella xylostella

Chlorpyrifos-resistant (Rc) Plutella xylostella (DBM) shows higher wing-vein injury than chlorpyrifos-susceptible (Sm) DBM under heat stress in our previous study. To investigate the toxicological mechanisms of the differences in injury of wing vein between Rc- and Sm-DBM collected from Fuzhou, China, total ten cDNA sequences of wing-development-related genes were isolated and characterized in DBM, including seven open reading frame (ORF) (ash1, ah2, ash3, ase, dpp, srf and dll encoded 187 amino acids, 231 aa, 223aa, 397aa, 423aa, 229aa and 299aa, respectively), and three partly sequences (salm, ser and wnt-1 encoded 614aa, 369aa and 388aa, respectively). The mRNA expression of the genes was inhibited in Rc- and Sm-DBM under heat stress, as compared with that an average temperature (25 °C). And, in general, significantly higher down-regulated expressions of the mRNA expression of the wing development-related genes were found in Rc-DBM as compared to those in Sm-DBM under heat stress. The results indicated that Sm-DBM displayed higher adaptability at high temperature because of significantly lower inhibition the mRNA expressions of wing-development-related genes. We suggest that significantly higher injury of wing vein showed in Rc-DBM under heat stress might be associated with the strong down-regulation of wing-development-related genes.

Stressful conditions reveal decrease in size, modification of shape but relatively stable asymmetry in bumblebee wings

Human activities can generate a wide variety of direct and indirect effects on animals, which can manifest as environmental and genetic stressors. Several phenotypic markers have been proposed as indicators of these stressful conditions but have displayed contrasting results, depending, among others, on the phenotypic trait measured. Knowing the worldwide decline of multiple bumblebee species, it is important to understand these stressors and link them with the drivers of decline. We assessed the impact of several stressors (i.e. natural toxin-, parasite-, thermic- and inbreeding- stress) on both wing shape and size and their variability as well as their directional and fluctuating asymmetries. The total data set includes 650 individuals of Bombus terrestris (Hymenoptera: Apidae). Overall wing size and shape were affected by all the tested stressors. Except for the sinigrin (e.g. glucosinolate) stress, each stress implies a decrease of wing size. Size variance was affected by several stressors, contrary to shape variance that was affected by none of them. Although wing size directional and fluctuating asymmetries were significantly affected by sinigrin, parasites and high temperatures, neither directional nor fluctuating shape asymmetry was significantly affected by any tested stressor. Parasites and high temperatures led to the strongest phenotype modifications. Overall size and shape were the most sensitive morphological traits, which contrasts with the common view that fluctuating asymmetry is the major phenotypic marker of stress.

Planar morphometrics using Teichmüller maps

Inspired by the question of quantifying wing shape, we propose a computational approach for analysing planar shapes. We first establish a correspondence between the boundaries of two planar shapes with boundary landmarks using geometric functional data analysis and then compute a landmark-matching curvature-guided Teichmüller mapping with uniform quasi-conformal distortion in the bulk. This allows us to analyse the pair-wise difference between the planar shapes and construct a similarity matrix on which we deploy methods from network analysis to cluster shapes. We deploy our method to study a variety of Drosophila wings across species to highlight the phenotypic variation between them, and Lepidoptera wings over time to study the developmental progression of wings. Our approach of combining complex analysis, computation and statistics to quantify, compare and classify planar shapes may be usefully deployed in other biological and physical systems.

Directional selection reduces developmental canalization against genetic and environmental perturbations in Drosophila wings

Natural selection may enhance or weaken the robustness of phenotypes against genetic or environmental perturbations. However, important aspects of the relationship between adaptive evolution and canalization remain unclear. Recent work showed that the evolution of larger wing size in a high altitude natural population of Drosophila melanogaster was accompanied by decanalized wing development--specifically a loss of robustness to genetic perturbation. But this study did not address environmental robustness, and it compared populations that may have numerous biological differences. Here, we perform artificial selection on this same trait in D. melanogaster (larger wing length) and directly test whether this directional selection resulted in decanalization. We find that in general, size-selected replicates show greater frequencies of wing defects than control replicates both after mutagenesis (genetic perturbation) and when subjected to high temperature stress (environmental perturbation), although the increase in defect frequency varies importantly among replicates. These results support the hypothesis that directional selection may result in the loss of both genetic and environmental robustness-offering a rare window into the relationship between adaptation and canalization.

Phenotypic plasticity of Drosophila suzukii wing to developmental temperature: implications for flight

Phenotypic plasticity has been proposed as a mechanism that facilitates the success of biological invasions. In order to test the hypothesis of an adaptive role for plasticity in invasions, particular attention should be paid to the relationship between the focal plastic trait, the environmental stimulus and the functional importance of the trait. The Drosophila wing is particularly amenable to experimental studies of phenotypic plasticity. Wing morphology is known for its plastic variation under different experimental temperatures, but this plasticity has rarely been investigated in a functional context of flight. Here, we investigate the effect of temperature on wing morphology and flight in the invasive pest species Drosophila suzukii Although the rapid invasion of both Europe and North America was most likely facilitated by human activities, D. suzukii is also expected to disperse actively. By quantifying wing morphology and individual flight trajectories of flies raised under different temperatures, we tested whether (1) invasive populations of D. suzukii show higher phenotypic plasticity than their native counterparts, and (2) wing plasticity affects flight parameters. Developmental temperature was found to affect both wing morphology and flight parameters (in particular speed and acceleration), leaving open the possibility of an adaptive value for wing plasticity. Our results show no difference in phenotypic plasticity between invasive and native populations, rejecting a role for wing plasticity in the invasion success.

The developmental-genetics of canalization

Canalization, or robustness to genetic or environmental perturbations, is fundamental to complex organisms. While there is strong evidence for canalization as an evolved property that varies among genotypes, the developmental and genetic mechanisms that produce this phenomenon are very poorly understood. For evolutionary biology, understanding how canalization arises is important because, by modulating the phenotypic variation that arises in response to genetic differences, canalization is a determinant of evolvability. For genetics of disease in humans and for economically important traits in agriculture, this subject is important because canalization is a potentially significant cause of missing heritability that confounds genomic prediction of phenotypes. We review the major lines of thought on the developmental-genetic basis for canalization. These fall into two groups. One proposes specific evolved molecular mechanisms while the other deals with robustness or canalization as a more general feature of development. These explanations for canalization are not mutually exclusive and they overlap in several ways. General explanations for canalization are more likely to involve emergent features of development than specific molecular mechanisms. Disentangling these explanations is also complicated by differences in perspectives between genetics and developmental biology. Understanding canalization at a mechanistic level will require conceptual and methodological approaches that integrate quantitative genetics and developmental biology.

Morphological homeostasis in the fossil record

Morphological homeostasis limits the extent to which genetic and/or environmental variation is translated into phenotypic variation, providing generation-to-generation fitness advantage under a stabilizing selection regime. Depending on its lability, morphological homeostasis might also have a longer-term impact on evolution by restricting the variation-and thus the response to directional selection-of a trait. The fossil record offers an inviting opportunity to investigate whether and how morphological homeostasis constrained trait evolution in lineages or clades on long timescales (thousands to millions of years) that are not accessible to neontological studies. Fossils can also reveal insight into the nature of primitive developmental systems that might not be predictable from the study of modern organisms. The ability to study morphological homeostasis in fossils is strongly limited by taphonomic processes that can destroy, blur, or distort the original biological signal: genetic data are unavailable; phenotypic data can be modified by tectonic or compaction-related deformation; time-averaging limits temporal resolution; and environmental variation is hard to study and impossible to control. As a result of these processes, neither allelic sensitivity (and thus genetic canalization) nor macroenvironmental sensitivity (and thus environmental canalization) can be unambiguously assessed in the fossil record. However, homeorhesis-robustness against microenvironmental variation (developmental noise)-can be assessed in ancient developmental systems by measuring the level of fluctuating asymmetry (FA) in a nominally symmetric trait. This requires the analysis of multiple, minimally time-averaged samples of exquisite preservational quality. Studies of FA in fossils stand to make valuable contributions to our understanding of the deep-time significance of homeorhesis. Few empirical studies have been conducted to date, and future paleontological research focusing on how homeorhesis relates to evolutionary rate (including stasis), species survivorship, and purported macroevolutionary trends in evolvability would reap high reward.

Multiple modes of canalization: Links between genetic, environmental canalizations and developmental stability, and their trait-specificity

The robustness of biological systems against mutational and environmental perturbations is termed canalization. Because reducing phenotypic variability under environmental and genetic perturbations can be adaptive and facilitated by natural selection, it has been suggested that once canalization mechanisms have evolved to buffer the effects of environmental perturbations, they may act to buffer any and all sources of variation. Although whether canalization mechanisms are general or specific to the types of perturbation or phenotypic traits that they buffer is often addressed, the links between different canalization mechanisms remain unclear. In this review, three major sources of phenotypic variation, associated canalization concepts and indicators of the degree of canalization are first outlined. Then, the molecular bases of canalization mechanisms based on recent empirical studies are overviewed. Finally, the links between the underlying processes of different canalization mechanisms are explored.

Phenotypic plasticity, canalization, and the origins of novelty: Evidence and mechanisms from amphibians

A growing number of biologists have begun asking whether environmentally induced phenotypic change--'phenotypic plasticity'--precedes and facilitates the origin and canalization of novel, complex phenotypes. However, such 'plasticity-first evolution' (PFE) remains controversial. Here, we summarize the PFE hypothesis and describe how it can be evaluated in natural systems. We then review the evidence for PFE from amphibians (a group in which phenotypic plasticity is especially widespread) and describe how phenotypic plasticity might have facilitated macroevolutionary change. Finally, we discuss what is known about the proximate mechanisms of PFE in amphibians. We close with suggestions for future research. As we describe, amphibians offer some of the best support for plasticity's role in the origin of evolutionary novelties.

Wing morphology variations in a natural population of Phlebotomus tobbi Adler and Theodor 1930

Cutaneous leishmaniasis (CL) is highly endemic in the Cukurova region, located on the crossroads of main refugee routes from the Middle East to Europe on the eastern Mediterranean part of Turkey. Our purpose was to investigate the phenotypic variation of Phlebotomus tobbi, the known vector of CL in the region, during one active season. Sand flies and microclimatic data were collected monthly from May to October, 2011, from five locations in six villages in the study area. A geometric morphometric approach was used to investigate wing morphology. Shape analyses revealed that males collected in May and June comprised one group, while specimens collected in August, September, and October formed a second group. Specimens from July were found to be distributed within these two groups. A similar distribution pattern was observed for females, but specimens from October were represented as the third district group. Significant size variation was detected for both sexes between months. Wing size and temperature were negatively correlated for females, but there was no temperature effect for males. Wing size of both sexes was increased in correlation to increasing relative humidity. Males were found to have smaller wings with increasing population density.

The ontogeny of developmental buffering in lizard head shape

Canalization and developmental stability (DS) are important organismal properties involved in determining the level of phenotypic variation. Ontogenetic patterns of phenotypic variance components can shed light on the mechanistic basis of developmental buffering (DB). Here, we analyze how individual FA and among-individual variation in head shape change in ontogenetic series of three lizard species raised in laboratory. The degree of asymmetry increased slightly with size, suggesting that developmental mechanisms hypothesized to correct for deviations either do not exist, or that their efficiency is truncated with increasing size. Alternatively, they may need the disturbance as a trigger. The relationship between asymmetry and age was complex, with asymmetry being stable across the age range in two species but increased with age in the third. Lack of congruence in ontogenetic patterns of asymmetry might be due to intrinsic differences in buffering mechanisms or a result of species-specific growth patterns. Head shape was shown to be equally canalized across both size and age range in all species, probably as a result of a balance between the buffering mechanisms and mechanisms generating variance. The patterns of symmetric and asymmetric head shape variation were highly correlated across species meaning that DS and canalization may rely on similar mechanisms.

Development and evolution of segmentation assessed by geometric morphometrics: The centipede Strigamia maritima as a case study

Using the centipede model species Strigamia maritima as a subject of study, we illustrate the potential of geometric morphometrics for investigating the development and evolution of segmentation, with a specific focus on post-embryonic segmental patterning. We show how these techniques can contribute detailed descriptive data for comparative purposes, but also precious information on some features of the developmental system that are considered relevant for the evolvability of a segmented body architecture, such as developmental stability and canalization. Morphometric analyses allow to separately investigate several sources of phenotypic variation along a segmented body axis, like constitutive and random segment heteronomy, both within and among individuals. Specifically, in S. maritima, the segmental pattern of ventral sclerite shapes mirrors that of their bilateral fluctuating asymmetry and among-individual variation in associating the most anterior and most posterior segments in diverging from the central ones. Also, among segments, there seems to be a correlation between fluctuating asymmetry and shape variation among individuals, suggesting that canalization and developmental stability are somehow associated. Overall, these associations might stem from a joint influence of the segmental position on the two processes of developmental buffering.

Evolved Repression Overcomes Enhancer Robustness

Biological systems display extraordinary robustness. Robustness of transcriptional enhancers results mainly from clusters of binding sites for the same transcription factor, and it is not clear how robust enhancers can evolve loss of expression through point mutations. Here, we report the high-resolution functional dissection of a robust enhancer of the shavenbaby gene that has contributed to morphological evolution. We found that robustness is encoded by many binding sites for the transcriptional activator Arrowhead and that, during evolution, some of these activator sites were lost, weakening enhancer activity. Complete silencing of enhancer function, however, required evolution of a binding site for the spatially restricted potent repressor Abrupt. These findings illustrate that recruitment of repressor binding sites can overcome enhancer robustness and may minimize pleiotropic consequences of enhancer evolution. Recruitment of repression may be a general mode of evolution to break robust regulatory linkages.

Disintegrating the fly: A mutational perspective on phenotypic integration and covariation

The structure of environmentally induced phenotypic covariation can influence the effective strength and magnitude of natural selection. Yet our understanding of the factors that contribute to and influence the evolutionary lability of such covariation is poor. Most studies have either examined environmental variation without accounting for covariation, or examined phenotypic and genetic covariation without distinguishing the environmental component. In this study, we examined the effect of mutational perturbations on different properties of environmental covariation, as well as mean shape. We use strains of Drosophila melanogaster bearing well-characterized mutations known to influence wing shape, as well as naturally derived strains, all reared under carefully controlled conditions and with the same genetic background. We find that mean shape changes more freely than the covariance structure, and that different properties of the covariance matrix change independently from each other. The perturbations affect matrix orientation more than they affect matrix eccentricity or total variance. Yet, mutational effects on matrix orientation do not cluster according to the developmental pathway that they target. These results suggest that it might be useful to consider a more general concept of "decanalization," involving all aspects of variation and covariation.

Drosophila wing modularity revisited through a quantitative genetic approach

To predict the response of complex morphological structures to selection it is necessary to know how the covariation among its different parts is organized. Two key features of covariation are modularity and integration. The Drosophila wing is currently considered a fully integrated structure. Here, we study the patterns of integration of the Drosophila wing and test the hypothesis of the wing being divided into two modules along the proximo-distal axis, as suggested by developmental, biomechanical, and evolutionary evidence. To achieve these goals we perform a multilevel analysis of covariation combining the techniques of geometric morphometrics and quantitative genetics. Our results indicate that the Drosophila wing is indeed organized into two main modules, the wing base and the wing blade. The patterns of integration and modularity were highly concordant at the phenotypic, genetic, environmental, and developmental levels. Besides, we found that modularity at the developmental level was considerably higher than modularity at other levels, suggesting that in the Drosophila wing direct developmental interactions are major contributors to total phenotypic shape variation. We propose that the precise time at which covariance-generating developmental processes occur and/or the magnitude of variation that they produce favor proximo-distal, rather than anterior-posterior, modularity in the Drosophila wing.

Does 3D Phenotyping Yield Substantial Insights in the Genetics of the Mouse Mandible Shape?

We describe the application of high-resolution 3D microcomputed tomography, together with 3D landmarks and geometric morphometrics, to validate and further improve previous quantitative genetic studies that reported QTL responsible for variation in the mandible shape of laboratory mice using a new backcross between C57BL/6J and A/J inbred strains. Despite the increasing availability of 3D imaging techniques, artificial flattening of the mandible by 2D imaging techniques seems at first an acceptable compromise for large-scale phenotyping protocols, thanks to an abundance of low-cost digital imaging systems such as microscopes or digital cameras. We evaluated the gain of information from considering explicitly this additional third dimension, and also from capturing variation on the bone surface where no precise anatomical landmark can be marked. Multivariate QTL mapping conducted with different landmark configurations (2D vs. 3D; manual vs. semilandmarks) broadly agreed with the findings of previous studies. Significantly more QTL (23) were identified and more precisely mapped when the mandible shape was captured with a large set of semilandmarks coupled with manual landmarks. It appears that finer phenotypic characterization of the mandibular shape with 3D landmarks, along with higher density genotyping, yields better insights into the genetic architecture of mandibular development. Most of the main variation is, nonetheless, preferentially embedded in the natural 2D plane of the hemi-mandible, reinforcing the results of earlier influential investigations.