Surveillance of Naegleria fowleri in Louisiana's public water systems

The free-living amoeba Naegleria fowleri (Nf) inhabits soil and natural waters worldwide: it is thermophilic and thrives at temperatures up to 45 °C and in a multitude of environments. Three deaths in Louisiana were attributed to primary amoebic meningoencephalitis (PAM) caused by Nf infection in 2011 and 2013. Following these incidents, public water systems are now monitored for the presence of Nf in Louisiana. From 2014 to 2018, 29% (27/93) of samples collected showed positive for Nf and 68% (63/93) showed all thermophilic amoeba culture. Ten raw water sources and 17 distribution water systems tested positive. The year 2017 showed the highest number of samples with Nf (n = 10) followed by nine samples in 2015. As climate change increases surface water temperatures, continued testing for Nf prevalence will be an important facet of water monitoring and will need to extend into locations farther north than the current most common range.

Assessing residential activity in a home plumbing system simulator: monitoring the occurrence and relationship of major opportunistic pathogens and phagocytic amoebas

Opportunistic premise plumbing pathogens (OPPPs) have been detected in buildings' plumbing systems causing waterborne disease outbreaks in the United States. In this study, we monitored the occurrence of OPPPs along with free-living amoeba (FLA) and investigated the effects of residential activities in a simulated home plumbing system (HPS). Water samples were collected from various locations in the HPS and analyzed for three major OPPPs: Legionella pneumophila, nontuberculous mycobacterial species (e.g., Mycobacterium avium, M. intracellulare, and M. abscessus), and Pseudomonas aeruginosa along with two groups of amoebas (Acanthamoeba and Vermamoeba vermiformis). A metagenomic approach was also used to further characterize the microbial communities. Results show that the microbial community is highly diverse with evidence of spatial and temporal structuring influenced by environmental conditions. L. pneumophila was the most prevalent pathogen (86% of samples), followed by M. intracellulare (66%) and P. aeruginosa (21%). Interestingly, M. avium and M. abscessus were not detected in any samples. The data revealed a relatively low prevalence of Acanthamoeba spp. (4%), while V. vermiformis was widely detected (81%) across all the sampling locations within the HPS. Locations with a high concentration of L. pneumophila and M. intracellulare coincided with the highest detection of V. vermiformis, suggesting the potential growth of both populations within FLA and additional protection in drinking water. After a period of stagnation lasting at least 2-weeks, the concentrations of OPPPs and amoeba immediately increased and then decreased gradually back to the baseline. Furthermore, monitoring the microbial population after drainage of the hot water tank and partial drainage of the entire HPS demonstrated no significant mitigation of the selected OPPPs. This study demonstrates that these organisms can adjust to their environment during such events and may survive in biofilms and/or grow within FLA, protecting them from stressors in the supplied water.

Mycobacterial contamination in tap and shower waters in Thailand

Waterborne disease is increasingly becoming associated with opportunistic premise plumbing pathogens (OPPPs), which can resist residual chlorination, regrow throughout drinking water distribution systems, and colonize premise plumbing. Nontuberculous mycobacteria (NTM) include clinically important species and exert a high burden on healthcare systems. We briefly report a qPCR-based survey of Mycobacterium spp. numbers in tap, POU-treated, and shower waters from Bangkok, Thailand. Non-stagnant tap waters and non-stagnant shower waters had mean numbers of 1.3 × 103 and 2.4 × 103 copies/mL, respectively. Water stagnation resulted in mean numbers higher by up to 1.0 log. The lowest number, 25 copies/mL, was obtained from a POU-treated sample, while the highest number, 2.0 × 104 copies/mL, came from a stagnant tap. Comparing with international data, mean numbers in this study were greater than those in nine out of 11 (82%) comparable studies, and the maximum numbers in this study were also high. Our samples of Bangkok waters exhibited relatively high Mycobacterium spp. numbers, suggesting the need for appropriate POU treatment systems where NTM infection is a health concern. This survey data can be used to set inactivation performance targets in POU water disinfection system design and may also lead to quantitative microbial risk assessment (QMRA) studies.

Using cyanobacteria and other phytoplankton to assess trophic conditions: A qPCR-based, multi-year study in twelve large rivers across the United States

Phytoplankton is the essential primary producer in fresh surface water ecosystems. However, excessive phytoplankton growth due to eutrophication significantly threatens ecologic, economic, and public health. Therefore, phytoplankton identification and quantification are essential to understanding the productivity and health of freshwater ecosystems as well as the impacts of phytoplankton overgrowth (such as Cyanobacterial blooms) on public health. Microscopy is the gold standard for phytoplankton assessment but is time-consuming, has low throughput, and requires rich experience in phytoplankton morphology. Quantitative polymerase chain reaction (qPCR) is accurate and straightforward with high throughput. In addition, qPCR does not require expertise in phytoplankton morphology. Therefore, qPCR can be a useful alternative for molecular identification and enumeration of phytoplankton. Nonetheless, a comprehensive study is missing which evaluates and compares the feasibility of using qPCR and microscopy to assess phytoplankton in fresh water. This study 1) compared the performance of qPCR and microscopy in identifying and quantifying phytoplankton and 2) evaluated qPCR as a molecular tool to assess phytoplankton and indicate eutrophication. We assessed phytoplankton using both qPCR and microscopy in twelve large freshwater rivers across the United States from early summer to late fall in 2017, 2018, and 2019. qPCR- and microscope-based phytoplankton abundance had a significant positive linear correlation (adjusted R2 = 0.836, p-value < 0.001). Phytoplankton abundance had limited temporal variation within each sampling season and over the three years studied. The sampling sites in the midcontinent rivers had higher phytoplankton abundance than those in the eastern and western rivers. For instance, the concentration (geometric mean) of Bacillariophyta, Cyanobacteria, Chlorophyta, and Dinoflagellates at the sampling sites in the midcontinent rivers was approximately three times that at the sampling sites in the western rivers and approximately 18 times that at the sampling sites in the eastern rivers. Welch's analysis of variance indicates that phytoplankton abundance at the sampling sites in the midcontinent rivers was significantly higher than that at the sampling sites in the eastern rivers (p-value = 0.013) but was comparable to that at the sampling sites in the western rivers (p-value = 0.095). The higher phytoplankton abundance at the sampling sites in the midcontinent rivers was presumably because these rivers were more eutrophic. Indeed, low phytoplankton abundance occurred in oligotrophic or low trophic sites, whereas eutrophic sites had greater phytoplankton abundance. This study demonstrates that qPCR-based phytoplankton abundance can be a useful numerical indicator of the trophic conditions and water quality in freshwater rivers.

Legionella monitoring results by water quality characteristics in a large public water system

Legionella, the causative agent of Legionnaires' disease, is an emerging concern for water utilities. Passaic Valley Water Commission (PVWC) is a public drinking water supplier, which provides treated surface water to approximately 800,000 customers in New Jersey. To evaluate the occurrence of Legionella in the PVWC distribution system, swab, first draw, and flushed cold water samples were collected from total coliform sites (n = 58) during a summer and winter sampling event. Endpoint PCR detection methods were combined with culture for Legionella detection. Among 58 total coliform sites during the summer, 17.2% (10/58) of first draw samples were positive for 16S and mip Legionella DNA markers and 15.5% (9/58) in flushed samples. Across both summer and winter sampling, a total of four out of 58 sites had low-level culture detection of Legionella spp. (0.5-1.6 CFU/mL) among first draw samples. Only one site had both a first and flush draw detection (8.5 CFU/mL and 1.1 CFU/mL) for an estimated culture detection frequency of 0% in the summer and 1.7% in the winter among flushed draw samples. No L. pneumophila was detected by culture. Legionella DNA detection was significantly greater in the summer than in the winter, and detection was greater in samples collected from areas treated with phosphate. No statistical difference was found between first draw and flush sample detection. Total organic carbon, copper, and nitrate were significantly associated with Legionella DNA detection.

Polystyrene microplastics mitigate the embryotoxic damage of metformin and guanylurea in Danio rerio

Microplastics (MPs) alone may endanger the health and fitness of aquatic species through different mechanisms. However, the harmful effects of these when mixed with other emerging contaminants require additional research. Herein, we aimed to determine whether a mixture of MPs with metformin (MET) or guanylurea (GUA) might induce embryotoxicity and oxidative stress in Danio rerio. Upon exposure to mixtures, our results showed MPs reduced the mortality rate of MET and GUA in embryos. Moreover, the severity and the rate of malformations were also decreased in all mixtures with MPs. Concerning oxidative stress, our findings indicated MET, GUA, MPs, and the mixtures increased the levels of lipoperoxidation, hydroperoxide content, and protein carbonyl content in D. rerio larvae. However, the oxidative damage induced in all mixtures was lower than that produced by both drugs alone. Thus, it is likely that the accumulation of MPs avoided the entrance of MET and GUA into the embryos. Once the embryo hatched, MPs did only remain accumulated in the yolk sac of larvae and did not translocate to other organs. Our risk assessment analysis confirmed that MPs shrunk the damage produced by MET and GUA. In a nutshell, MPs mitigate the embryotoxic damage of metformin and guanylurea in D. rerio by blocking their entrance.

Biofilm Control in Flow-Through Systems Using Polyvalent Phages Delivered by Peptide-Modified M13 Coliphages with Enhanced Polysaccharide Affinity

Eradication of biofilms that may harbor pathogens in water distribution systems is an elusive goal due to limited penetration of residual disinfectants. Here, we explore the use of engineered filamentous coliphage M13 for enhanced biofilm affinity and precise delivery of lytic polyvalent phages (i.e., broad-host-range phages lysing multiple host strains after infection). To promote biofilm attachment, we modified the M13 major coat protein (pVIII) by inserting a peptide sequence with high affinity for Pseudomonas aeruginosa (P. aeruginosa) extracellular polysaccharides (commonly present on the surface of biofilms in natural and engineered systems). Additionally, we engineered the M13 tail fiber protein (pIII) to contain a peptide sequence capable of binding a specific polyvalent lytic phage. The modified M13 had 102- and 5-fold higher affinity for P. aeruginosa-dominated mixed-species biofilms than wildtype M13 and unconjugated polyvalent phage, respectively. When applied to a simulated water distribution system, the resulting phage conjugates achieved targeted phage delivery to the biofilm and were more effective than polyvalent phages alone in reducing live bacterial biomass (84 vs 34%) and biofilm surface coverage (81 vs 22%). Biofilm regrowth was also mitigated as high phage concentrations induced residual bacteria to downregulate genes associated with quorum sensing and extracellular polymeric substance secretion. Overall, we demonstrate that engineered M13 can enable more accurate delivery of polyvalent phages to biofilms in flow-through systems for enhanced biofilm control.

It’s a Long Way to the Tap: Microbiome and DNA-Based Omics at the Core of Drinking Water Quality

Microbial communities interact with us and affect our health in ways that are only beginning to be understood. Microorganisms have been detected in every ecosystem on Earth, as well as in any built environment that has been investigated. Drinking water sources, drinking water treatment plants and distribution systems provide peculiar microbial ecological niches, dismantling the belief of the “biological simplicity” of drinking water. Nevertheless, drinking water microbiomes are understudied compared to other microbiomes. Recent DNA sequencing and meta-omics advancements allow a deeper understanding of drinking water microbiota. Thus, moving beyond the limits of day-to-day testing for specific pathogenic microbes, new approaches aim at predicting microbiome changes driven by disturbances at the macro-scale and overtime. This will foster an effective and proactive management of water sources, improving the drinking water supply system and the monitoring activities to lower public health risk. Here, we want to give a new angle on drinking water microbiome research. Starting from a selection of 231 scientific publications on this topic, we emphasize the value of biodiversity in drinking water ecosystems and how it can be related with industrialization. We then discuss how microbiome research can support sustainable drinking water management, encouraging collaborations across sectors and involving the society through responsible research and innovation.

Distribution, Diversity and Antibiotic Resistance of Pseudomonas spp. Isolated from the Water Dams in the North of Tunisia

Natural environment is one of the important reservoirs to disseminate antibiotic resistance, most of the antibiotics resistance researches were focused on clinical isolates. Thus, this work aimed to analyze surface water samples collected from dams and rivers in the north of Tunisia. Pseudomonas species were confirmed using biochemical and molecular identifications. Resistance was studied by testing their susceptibility against 19 antibiotics using the disc diffusion method moreover the virulence factors were studied by PCR targeting 13 genes. 104 isolates were confirmed as Pseudomonas genera distributed into 21 species. The most abundant species is P. aeruginosa (22.11%), followed by P. protegens (12.5%). No resistance phenotypes were observed towards imipenem, meropenem, ceftazidime, colistin, ciprofloxacin and amikacin. A high resistance level was observed against cefoxitin (94.23%), amoxicillin-clavulanic acid (67.31%), nalidixic acid (62.5%), streptomycin (57.69%), ticarcillin (43.27%), fosfomycin (64.42%) and tetracycline (23.08%). A low rate of resistance was observed against cefotaxime (16.35%) and gentamicin (7.69%). The majority (70.19%) of isolates were Multidrug-resistant (MDR). 12 of virulence genes were found in all P. aeruginosa isolates. Our results showed that Pseudomonas isolates could be an important reservoir of antibiotic resistance from environment sites.

Variation in the Structure and Composition of Bacterial Communities within Drinking Water Fountains in Melbourne, Australia

Modern drinking water distributions systems (DWDSs) have been designed to transport treated or untreated water safely to the consumer. DWDSs are complex environments where microorganisms are able to create their own niches within water, biofilm or sediment. This study was conducted on twelve drinking fountains (of three different types, namely types A, B and C) within the Melbourne (Australia) city area with the aim to (i) characterize the water quality and viable and total counts at each fountain, (ii) compare the differences in the structure and diversity of the bacterial community between bulk water and biofilm and (iii) determine differences between the bacterial communities based on fountain type. Samples of water and biofilm were assessed using both culture-dependent and culture-independent techniques. Heterotrophic plate counts of water samples ranged from 0.5 to 107.5 CFU mL−1, and as expected, total cell counts (cells mL−1) were, on average, 2.9 orders of magnitude higher. Based on the mean relative abundance of operational taxonomic units (OTUs), ANOSIM showed that the structure of the bacterial communities in drinking water and biofilm varied significantly (R = 0.58, p = 0.001). Additionally, ANOSIM showed that across fountain types (in water), the bacterial community was more diverse in fountain type C compared to type A (p < 0.001) and type B (p < 0.001). 16S rRNA next-generation sequencing revealed that the bacterial communities in both water and biofilm were dominated by only seven phyla, with Proteobacteria accounting for 71.3% of reads in water and 68.9% in biofilm. The next most abundant phylum was Actinobacteria (10.4% water; 11.7% biofilm). In water, the genus with the highest overall mean relative abundance was Sphingomonas (24.2%), while Methylobacterium had the highest mean relative abundance in biofilm samples (54.7%). At the level of genus and higher, significant differences in dominance were found across fountain types. In water, Solirubrobacterales (order) were present in type C fountains at a relative abundance of 17%, while the mean relative abundance of Sphingomonas sp. in type C fountains was less than half that in types A (25%) and B (43%). In biofilm, the relative abundance of Sphingomonas sp. was more than double in type A (10%) fountains compared to types B (4%) and C (5%), and Sandarakinorhabdus sp. were high in type A fountains (6%) and low in types B and C (1%). Overall this research showed that there were significant differences in the composition of bacterial communities in water and biofilm from the same site. Furthermore, significant variation exists between microbial communities present in the fountain types, which may be related to age. Long-established environments may lead to a greater chance of certain bacteria gaining abilities such as increased disinfection resistance. Variations between the structure of the bacterial community residing in water and biofilm and differences between fountain types show that it is essential to regularly test samples from individual locations to determine microbial quality.

Practitioners’ Perspective on the Prevalent Water Quality Management Practices for Legionella Control in Large Buildings in the United States

Managing building water systems is complicated by the need to maintain hot water temperatures high enough to control the growth of Legionella spp. while minimizing the risk of scalding. This study assessed water quality management practices in large buildings in the United States. Surveys conducted with building water quality managers found that more than 85% of buildings have hot water temperatures that are consistent with scald risk mitigation guidelines (i.e., <122 °F/50 °C). However, nearly two thirds and three quarters of buildings do not comply with the common temperature guidance for opportunistic pathogen control, i.e., water heater setpoint > 140 °F (60 °C) and recirculation loop > 122 °F (50 °C), respectively; median values for both setpoint and recirculation loop temperatures are 10 °F (6 °C) or more below temperatures recommended for opportunistic pathogen control. These observations suggest that many buildings are prone to Legionella spp. risk. The study also found that 27% of buildings do not comply with guidelines for time to equilibrium hot water temperature, over 33% fail to monitor temperature in the recirculation loop, more than 70% fail to replace or disinfect showerheads, more than 40% lack a written management plan, and only a minority conduct any monitoring of residual disinfectant levels or microbiological quality. Given the rise in Legionellosis infections in recent years, coupled with highlighted water quality concerns because of prolonged water stagnation in plumbing, such as in buildings closed due to COVID-19, current management practices, which appear to be focused on scald risk, may need to be broadened to include greater attention to control of opportunistic pathogens. To accomplish this, there is a need for formal training and resources for facility managers.

The Impact of Extreme Weather Events on Bacterial Communities and Opportunistic Pathogens in a Drinking Water Treatment Plant

Drinking water treatment processes are highly effective at improving water quality, but pathogens can still persist in treated water, especially after extreme weather events. To identify how extreme weather events affected bacterial populations in source and treated water, water samples were collected from the Yangtze River Delta area and a local full-scale drinking water treatment plant. Bacterial community structure and the occurrence of pathogens were investigated in samples using 16S rRNA sequencing and qPCR techniques. In this study, the results show that intense rainfall can significantly increase levels of bacteria and opportunistic pathogens in river and drinking water treatment processes (p < 0.05); in particular, the relative abundance of Cyanobacteria increased after a super typhoon event (p < 0.05). The biological activated carbon (BAC) tank was identified as a potential pathogen reservoir and was responsible for 52 ± 6% of the bacteria released downstream, according to Bayesian-based SourceTracker analysis. Our results provide an insight into the challenges faced by maintaining finished water quality under changing weather conditions.

Spatial-temporal targeted and non-targeted surveys to assess microbiological composition of drinking water in Puerto Rico following Hurricane Maria

Loss of basic utilities, such as drinking water and electricity distribution, were sustained for months in the aftermath of Hurricane Maria's (HM) landfall in Puerto Rico (PR) in September 2017. The goal of this study was to assess if there was deterioration in biological quality of drinking water due to these disruptions. This study characterized the microbial composition of drinking water following HM across nine drinking water systems (DWSs) in PR and utilized an extended temporal sampling campaign to determine if changes in the drinking water microbiome were indicative of HM associated disturbance followed by recovery. In addition to monitoring water chemistry, the samples were subjected to culture independent targeted and non-targeted microbial analysis including quantitative PCR (qPCR) and genome-resolved metagenomics. The qPCR results showed that residual disinfectant was the major driver of bacterial concentrations in tap water with marked decrease in concentrations from early to late sampling timepoints. While Mycobacterium avium and Pseudomonas aeruginosa were not detected in any sampling locations and timepoints, genetic material from Leptospira and Legionella pneumophila were transiently detected in a few sampling locations. The majority of metagenome assembled genomes (MAGs) recovered from these samples were not associated with pathogens and were consistent with bacterial community members routinely detected in DWSs. Further, whole metagenome-level comparisons between drinking water samples collected in this study with samples from other full-scale DWS indicated no significant deviation from expected community membership of the drinking water microbiome. Overall, our results suggest that disruptions due to HM did not result in significant and sustained deterioration of biological quality of drinking water at our study sites.

Characterization of eukaryotic microbiome and associated bacteria communities in a drinking water treatment plant

The effectiveness of drinking water treatment is critical to achieve an optimal and safe drinking water. Disinfection is one of the most important steps to eliminate the health concern caused by the microbial population in this type of water. However, no study has evaluated the changes in its microbiome, specially the eukaryotic microbiome, and the fates of opportunistic pathogens generated by UV disinfection with medium-pressure mercury lamps in drinking water treatment plants (DWTPs). In this work, the eukaryotic community composition of a DWTP with UV disinfection was evaluated before and after a UV disinfection treatment by means of Illumina 18S rRNA amplicon-based sequencing. Among the physicochemical parameters analysed, flow and nitrate appeared to be related with the changes in the eukaryotic microbiome shape. Public health concern eukaryotic organisms such as Blastocystis, Entamoeba, Acanthamoeba, Hartmannella, Naegleria, Microsporidium or Caenorhabditis were identified. Additionally, the relation between the occurrence of some human bacterial pathogens and the presence of some eukaryotic organisms has been studied. The presence of some human bacterial pathogens such as Arcobacter, Mycobacterium, Pseudomonas and Parachlamydia were statistically correlated with the presence of some eukaryotic carriers showing the public health risk due to the bacterial pathogens they could shelter.

Legionella: A Promising Supplementary Indicator of Microbial Drinking Water Quality in Municipal Engineered Water Systems

Opportunistic pathogens (OPs) are natural inhabitants and the predominant disease causative biotic agents in municipal engineered water systems (EWSs). In EWSs, OPs occur at high frequencies and concentrations, cause drinking-water-related disease outbreaks, and are a major factor threatening public health. Therefore, the prevalence of OPs in EWSs represents microbial drinking water quality. Closely or routinely monitoring the dynamics of OPs in municipal EWSs is thus critical to ensuring drinking water quality and protecting public health. Monitoring the dynamics of conventional (fecal) indicators (e.g., total coliforms, fecal coliforms, and Escherichia coli) is the customary or even exclusive means of assessing microbial drinking water quality. However, those indicators infer only fecal contamination due to treatment (e.g., disinfection within water utilities) failure and EWS infrastructure issues (e.g., water main breaks and infiltration), whereas OPs are not contaminants in drinking water. In addition, those indicators appear in EWSs at low concentrations (often absent in well-maintained EWSs) and are uncorrelated with OPs. For instance, conventional indicators decay, while OPs regrow with increasing hydraulic residence time. As a result, conventional indicators are poor indicators of OPs (the major aspect of microbial drinking water quality) in EWSs. An additional or supplementary indicator that can well infer the prevalence of OPs in EWSs is highly needed. This systematic review argues that Legionella as a dominant OP-containing genus and natural inhabitant in EWSs is a promising candidate for such a supplementary indicator. Through comprehensively comparing the behavior (i.e., occurrence, growth and regrowth, spatiotemporal variations in concentrations, resistance to disinfectant residuals, and responses to physicochemical water quality parameters) of major OPs (e.g., Legionella especially L. pneumophila, Mycobacterium, and Pseudomonas especially P. aeruginosa), this review proves that Legionella is a promising supplementary indicator for the prevalence of OPs in EWSs while other OPs lack this indication feature. Legionella as a dominant natural inhabitant in EWSs occurs frequently, has a high concentration, and correlates with more microbial and physicochemical water quality parameters than other common OPs. Legionella and OPs in EWSs share multiple key features such as high disinfectant resistance, biofilm formation, proliferation within amoebae, and significant spatiotemporal variations in concentrations. Therefore, the presence and concentration of Legionella well indicate the presence and concentrations of OPs (especially L. pneumophila) and microbial drinking water quality in EWSs. In addition, Legionella concentration indicates the efficacies of disinfectant residuals in EWSs. Furthermore, with the development of modern Legionella quantification methods (especially quantitative polymerase chain reactions), monitoring Legionella in ESWs is becoming easier, more affordable, and less labor-intensive. Those features make Legionella a proper supplementary indicator for microbial drinking water quality (especially the prevalence of OPs) in EWSs. Water authorities may use Legionella and conventional indicators in combination to more comprehensively assess microbial drinking water quality in municipal EWSs. Future work should further explore the indication role of Legionella in EWSs and propose drinking water Legionella concentration limits that indicate serious public health effects and require enhanced treatment (e.g., booster disinfection).

A comprehensive investigation of the microbial risk of secondary water supply systems in residential neighborhoods in a large city

Secondary water supply systems (SWSSs) are characterized by long water stagnation and low levels of chlorine residuals, which may pose a high microbial risk to terminal users. In this study, the SWSSs of 12 residential neighborhoods in a metropolitan area of 5 million people in southeastern China were seasonally investigated to assess their microbial risks by determining more than 30 physicochemical and biological parameters. Although the microbiological quality of SWSS water met the requirements of the standards for drinking water quality of China, it did deteriorate in various aspects. The heterotrophic plate counts with R2A media were high (> 100 CFU/mL) in some SWSS tank and tap water samples. Propidium monoazide (PMA)-qPCR revealed a one magnitude higher abundance of viable bacteria in the tank and tap water samples (average 10^3.63±1.10 and 10^3.65±1.25 gene copies/mL, respectively) compared with the input water samples, and Enterococcus, Acanthamoeba, and Hartmannella vermiformis were only detected in the tanks. In particular, the high detection frequency of Legionella in 35% tank and 21% tap water samples suggested it is a supplementary microbial safety indicator in SWSSs. The microbial regrowth potential was more obvious in summer, and Illumina sequencing also demonstrated distinct seasonal changes in the relative abundance of bacterial gene sequences at the genus level. Turbidity and residual chlorine were closely connected with total bacterial biomass, and the latter seemed responsible for microbial community structure alteration. The extremely low chlorine residuals associated with a high abundance of total bacteria (as high as 10^6.48 gene copies/mL) and Legionella (as high as 10^6.71 gene copies/100 mL) in the closed valve tanks highlighted the high microbial risk increased by mishandling the operation of SWSSs. This study found that SWSSs possessed a higher microbial risk than the drinking water network, which suggested that the frequency and scope of monitoring the microbial risk of SWSSs in megacities should be strengthened for the purpose of waterborne epidemic disease prevention and control.

Legionella and other opportunistic pathogens in full-scale chloraminated municipal drinking water distribution systems

Water-based opportunistic pathogens (OPs) are a leading cause of drinking-water-related disease outbreaks, especially in developed countries such as the United States (US). Physicochemical water quality parameters, especially disinfectant residuals, control the (re)growth, presence, colonization, and concentrations of OPs in drinking water distribution systems (DWDSs), while the relationship between OPs and those parameters remain unclear. This study aimed to quantify how physicochemical parameters, mainly monochloramine residual concentration, hydraulic residence time (HRT), and seasonality, affected the occurrence and concentrations of four common OPs (Legionella, Mycobacterium, Pseudomonas, and Vermamoeba vermiformis) in four full-scale DWDSs in the US. Legionella as a dominant OP occurred in 93.8% of the 64 sampling events and had a mean density of 4.27 × 105 genome copies per liter. Legionella positively correlated with Mycobacterium, Pseudomonas, and total bacteria. Multiple regression with data from the four DWDSs showed that Legionella had significant correlations with total chlorine residual level, free ammonia concentration, and trihalomethane concentration. Therefore, Legionella is a promising indicator of water-based OPs, reflecting microbial water quality in chloraminated DWDSs. The OP concentrations had strong seasonal variations and peaked in winter and/or spring possibly because of reduced water usage (i.e., increased water stagnation or HRT) during cold seasons. The OP concentrations generally increased with HRT presumably because of disinfectant residual decay, indicating the importance of well-maintaining disinfectant residuals in DWDSs for OP control. The concentrations of Mycobacterium, Pseudomonas, and V. vermiformis were significantly associated with total chlorine residual concentration, free ammonia concentration, and pH and trihalomethane concentration, respectively. Overall, this study demonstrates how the significant spatiotemporal variations of OP concentrations in chloraminated DWDSs correlated with critical physicochemical water quality parameters such as disinfectant residual levels. This work also indicates that Legionella is a promising indicator of OPs and microbial water quality in chloraminated DWDSs.

Microbial composition and diversity of drinking water: A full scale spatial-temporal investigation of a city in northern China

The microbiological water quality of drinking water distribution systems (DWDSs) is of primary importance for public health. The detachment of biofilm attached on the pipe wall attribution to water source switch and the occurrence of potentially pathogenic chlorine-resistant bacteria (CRB) under chlorine disinfection get lots of attention. Studies examining microbial communities after the water source switch, particularly in low-salinity water, have been scant. The UV‑chlorine combined disinfection applied in one of the investigated drinking water plants provided insight into the control of CRBs. We applied high-throughput sequencing of the 16S rRNA gene to characterize the bacterial communities of the DWDS in northern China over 1 year. A network comprising four different DWDSs was sampled at 48 sites every season (temperate continental monsoon climate), and the impact of key spatial-temporal and physicochemical parameters was investigated. Overall, the entire bacterial community was not significantly different among the four DWDSs (spatial parameter) but varied with seasons (temporal parameter). The switch in water sources might increase the relative abundance of potentially opportunistic pathogens in DWDSs. UV‑chlorine combined disinfection can decrease community diversity and is likely to control the growth of potential opportunistic pathogens in DWDSs.

Optimizing disinfectant residual dosage in engineered water systems to minimize the overall health risks of opportunistic pathogens and disinfection by-products

This Discussion argues that municipal water utilities may need to consider the health risks of both opportunistic pathogens (OPs) and disinfection by-products (DBPs) while selecting disinfectant residual dosages or levels in engineered water systems. OPs are natural inhabitants in municipal water systems and the leading cause of drinking-water-related disease outbreaks threatening public health. DBPs in water systems are genotoxic/carcinogenic and also significantly affect public health. Disinfectant residuals (such as free chlorine and chloramine residuals) dictate OP (re)growth and DBP formation in engineered water systems. Therefore, regulating the dosages or levels of disinfectant residuals is effective in controlling OP (re)growth and DBP formation. Existing effects assessing optimal disinfectant residual dosages focus solely on minimizing OP (re)growth or solely on DBP formation. However, selecting disinfectant residual dosages aiming to solely limit the formation of DBPs might compromise OP (re)growth control, and vice versa. An optimal disinfectant residual level for DBP formation control or OP (re)growth control might not be optimal for minimizing the overall or combined health effects of OPs and DBPs in drinking water. To better protect public health, water authorities may need to update the current residual disinfection practice and maintain disinfectant residuals in engineered water systems at an optimal level to minimize the overall health risks of OPs and DBPs.

The Increasing Importance of Vermamoeba vermiformis

Vermamoeba vermiformis are one of the most prevalent free-living amoebae. These amoebae are ubiquitous and also thermotolerant. Of concern, V. vermiformis have been found in hospital water networks. Furthermore, associations between V. vermiformis and pathogenic bacteria have been reported, such as Legionella pneumophila. Moreover, V. vermiformis are well known to host viruses, bacteria, and other microorganisms and cases of keratitis due to V. vermiformis in conjunction with other amoebae have been reported. Despite the preceding, the medical importance of V. vermiformis is still an ongoing discussion and its genome has been only recently sequenced. Herein, we present a review of the current understanding of the biology and pathogenesis pertaining to V. vermiformis, as well as its' role as an etiological agent and trojan horse. An approach known as theranostics which combines both diagnosis and therapy could be utilized to eradicate and diagnose keratitis cases caused by such amoebae. Given the rise in global warming, it is imperative to investigate these rarely studied amoebae and to understand their importance in human health.

The Bacterial Community Diversity of Bathroom Hot Tap Water Was Significantly Lower Than That of Cold Tap and Shower Water

Microbial drinking water quality in premise plumbing systems (PPSs) strongly affects public health. Bacterial community structure is the essential aspect of microbial water quality. Studies have elucidated the microbial community structure in cold tap water, while the microbial community structures in hot tap and shower water are poorly understood. We sampled cold tap, hot tap, and shower water from a simulated PPS monthly for 16 consecutive months and assessed the bacterial community structures in those samples via high-throughput sequencing of bacterial 16S rRNA genes. The total relative abundance of the top five most abundant phyla (Proteobacteria, Actinobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes) was greater than 90% among the 24 identified phyla. The most abundant families were Burkholderiaceae, Sphingomonadaceae, unclassified Alphaproteobacteria, unclassified Corynebacteriales, and Mycobacteriaceae. A multiple linear regression suggests that the bacterial community diversity increased with water temperature and the age of the simulated PPS, decreased with total chlorine residual concentration, and had a limited seasonal variation. The bacterial community in hot tap water had significantly lower Shannon and Inverse Simpson diversity indices (p < 0.05) and thus a much lower diversity than those in cold tap and shower water. The paradoxical results (i.e., diversity increased with water temperature, but hot tap water bacterial community was less diverse) were presumably because (1) other environmental factors made hot tap water bacterial community less diverse, (2) the diversity of bacterial communities in all types of water samples increased with water temperature, and (3) the first draw samples of hot tap water could have a comparable or even lower temperature than shower water samples and the second draw samples of cold tap water. In both a three-dimensional Non-metric multidimensional scaling ordination plot and a phylogenetic dendrogram, the samples of cold tap and shower water cluster and are separate from hot tap water samples (p < 0.05). In summary, the bacterial community in hot tap water in the simulated PPS had a distinct structure from and a much lower diversity than those in cold tap and shower water.

Metagenomic analysis of microbiota and antibiotic resistome in household activated carbon drinking water purifiers

Existing drinking water treatment systems have limited ability to control emerging contaminants such as antibiotic resistance genes (ARGs). Household activated carbon water purifiers (HWPs) are convenient measures to assure drinking water quality. However, ARGs distribution in HWPs has not been reported. Here, ARGs, mobile genetic elements (MGEs) and bacteria communities were profiled in tap water (TW), filter water (FW) and activated carbon (AC) biofilm from six kinds of HWPs after 80 days operation, using metagenomics. Results showed that the bacteria community diversities in FW and AC were higher than those in TW. A total of 88, 116 and 80 ARG subtypes were detected in TW, AC and FW, respectively. The AC structure was an important factor influencing the bacterial communities and ARG profiles in FW. The network analysis revealed the co-occurrence patterns between ARGs and bacteria. SourceTracker analyses showed AC biofilms were important contributors of microbes (29-79%) and ARGs (17-53%) in FW. Moreover, MGEs e.g. pBBta01, pMKMS02 and pMFLV01 plasmids, and ISMysp3 had significant co-occurrence patterns with ARGs in the AC biofilms. This study helps to understand the actual purification effect of HWPs and provides a theoretical reference for the management and control of ARGs pollution in domestic drinking water.

Living with Legionella and Other Waterborne Pathogens

Legionella spp. and other opportunistic premise plumbing pathogens (OPPPs), including Pseudomonas aeruginosa, Mycobacterium avium, Stenotrophomonas maltophilia, and Acinetobacter baumannii, are normal inhabitants of natural waters, drinking water distribution systems and premise plumbing. Thus, humans are regularly exposed to these pathogens. Unfortunately, Legionella spp. and the other OPPPs share a number of features that allow them to grow and persist in premise plumbing. They form biofilms and are also relatively disinfectant-resistant, able to grow at low organic matter concentrations, and able to grow under stagnant conditions. Infections have been traced to exposure to premise plumbing or aerosols generated in showers. A number of measures can lead to reduction in OPPP numbers in premise plumbing, including elevation of water heater temperatures.

Prevalence, Virulence, Antimicrobial Resistance, and Molecular Characterization of Pseudomonas aeruginosa Isolates From Drinking Water in China

Pseudomonas aeruginosa is an important opportunistic pathogen and remains a major threat to the microbial safety of drinking water. There is a lack of comprehensive data on P. aeruginosa contamination in drinking water in China. Therefore, this study aimed to determine the prevalence, genetic diversity, virulence genes, and antimicrobial resistance of P. aeruginosa isolated from mineral water and spring water in China. From January 2013 to January 2014, 314 drinking water samples were collected from 23 cities in China. Of the collected samples, 77 (24.5%) were contaminated with P. aeruginosa, and these comprised 34 raw water (30.4%), 39 activated carbon-filtered water (30.6%), and four final water product (3.9%). A total of 132 P. aeruginosa isolates were obtained, and all of them showed the presence of virulence genes, with the detection rates of ExoU, ExoS, phzM, toxA, and lasB genes being 7.6, 86.3, 95.5, 89.4, and 100%, respectively. All isolates were sensitive to the 14 antibiotics (ciprofloxacin, levofloxacin, ofloxacin, norfloxacin, gentamicin, tobramycin, amikacin, polymyxin B, imipenem, meropenem, aztreonam, ceftazidime, cefepime, and piperacillin/tazobactam) tested. The 132 isolates were categorized into 42 sequence types according to multilocus sequence typing, and ST235 accounted for 8.3% (11) of the total isolates. Thus, this study provides comprehensive data on the prevalence and characteristics of P. aeruginosa in drinking water in China and can aid in developing preventive measures against contamination during the drinking water treatment process.

Impacts of Municipal Water-Rainwater Source Transitions on Microbial and Chemical Water Quality Dynamics at the Tap

When rainwater harvesting is utilized as an alternative water resource in buildings, a combination of municipal water and rainwater is typically required to meet water demands. Altering source water chemistry can disrupt pipe scale and biofilm and negatively impact water quality at the distribution level. Still, it is unknown if similar reactions occur within building plumbing following a transition in source water quality. The goal of this study was to investigate changes in water chemistry and microbiology at a green building following a transition between municipal water and rainwater. We monitored water chemistry (metals, alkalinity, and disinfectant byproducts) and microbiology (total cell counts, plate counts, and opportunistic pathogen gene markers) throughout two source water transitions. Several constituents including alkalinity and disinfectant byproducts served as indicators of municipal water remaining in the system since the rainwater source does not contain these constituents. In the treated rainwater, microbial proliferation and Legionella spp. gene copy numbers were often three logs higher than those in municipal water. Because of differences in source water chemistry, rainwater and municipal water uniquely interacted with building plumbing and generated distinctively different drinking water chemical and microbial quality profiles.

Stochasticity in microbiology: managing unpredictability to reach the Sustainable Development Goals

Pure (single) cultures of microorganisms and mixed microbial communities (microbiomes) have been important for centuries in providing renewable energy, clean water and food products to human society and will continue to play a crucial role to pursue the Sustainable Development Goals. To use microorganisms effectively, microbial engineered processes require adequate control. Microbial communities are shaped by manageable deterministic processes, but also by stochastic processes, which can promote unforeseeable variations and adaptations. Here, we highlight the impact of stochasticity in single culture and microbiome engineering. First, we discuss the concepts and mechanisms of stochasticity in relation to microbial ecology of single cultures and microbiomes. Second, we discuss the consequences of stochasticity in relation to process performance and human health, which are reflected in key disadvantages and important opportunities. Third, we propose a suitable decision tool to deal with stochasticity in which monitoring of stochasticity and setting the boundaries of stochasticity by regulators are central aspects. Stochasticity may give rise to some risks, such as the presence of pathogens in microbiomes. We argue here that by taking the necessary precautions and through clever monitoring and interpretation, these risks can be mitigated.

Legionella pneumophila and Protozoan Hosts: Implications for the Control of Hospital and Potable Water Systems

Legionella pneumophila is an opportunistic waterborne pathogen of public health concern. It is the causative agent of Legionnaires’ disease (LD) and Pontiac fever and is ubiquitous in manufactured water systems, where protozoan hosts and complex microbial communities provide protection from disinfection procedures. This review collates the literature describing interactions between L. pneumophila and protozoan hosts in hospital and municipal potable water distribution systems. The effectiveness of currently available water disinfection protocols to control L. pneumophila and its protozoan hosts is explored. The studies identified in this systematic literature review demonstrated the failure of common disinfection procedures to achieve long term elimination of L. pneumophila and protozoan hosts from potable water. It has been demonstrated that protozoan hosts facilitate the intracellular replication and packaging of viable L. pneumophila in infectious vesicles; whereas, cyst-forming protozoans provide protection from prolonged environmental stress. Disinfection procedures and protozoan hosts also facilitate biogenesis of viable but non-culturable (VBNC) L. pneumophila which have been shown to be highly resistant to many water disinfection protocols. In conclusion, a better understanding of L. pneumophila-protozoan interactions and the structure of complex microbial biofilms is required for the improved management of L. pneumophila and the prevention of LD.

Molecular detection of opportunistic premise plumbing pathogens in rural Louisiana's drinking water distribution system

Opportunistic premise plumbing pathogens (OPPPs) in drinking water distribution systems are responsible for causing numerous infections such as Legionnaires' disease and pneumonia through the consumption of contaminated drinking water. The incidence of opportunistic pathogens and the number of individuals at risk of contracting infections caused by these OPPPs in drinking water has risen drastically in the past decade. Preflush and postflush water samples were collected from 64 houses in a rural town in northeast Louisiana to determine drinking water quality in terms of understanding abiotic and biotic factors on potential proliferation of OPPPs. Physical and chemical water quality parameters, such as pH, temperature, dissolved oxygen, salinity, and specific conductance were also measured. The quantitative polymerase chain reaction (qPCR) results indicated that Legionella spp. had the highest prevalence and was found in 46/64 samples (72%), followed by Mycobacterium spp. which was found in 43/64 samples (67%), E. coli in 31/64 samples (48%) and, Naegleria fowleri in 4/64 samples (6%) respectively. The results indicate the persistence of Legionella spp. DNA marker in these water samples.

To treat or not to treat? Misbeliefs in spa water disinfection

"Spa waters should be left untreated" says the dogmatic approach. Health authorities of European countries having traditional spa culture strictly control hygienic conditions of bathing in thermal/mineral waters. These regulations are based on the assumption that chemical treatment (disinfection) of such waters impacts their healing effects. However, a slow change of paradigm has been observed in studying the mode of action of spa waters that could help overcome recent attitudes. Organic content or the role of microbiome has also been emphasized by some authors recently. The article deals with possible interactions among aquatic microorganisms and the disinfection and health effects of spa waters and tries to explain the new findings in this field.

Composition and Dynamics of Bacterial Communities in a Full-Scale Mineral Water Treatment Plant

The aim of this study was to gain insight into the bacterial composition and dynamics in a mineral water treatment system (MWTS). The bacterial community of a full-scale mineral water treatment plant in the Maofeng Mountain, South China, was studied using high-throughput sequencing combined with cultivation-based techniques in both the dry and wet season. Overall, adenosine tri-phosphate (ATP) concentration (6.47 × 10^-11 – 3.32 × 10^-8 M) and heterotrophic plate counts (HPC) (3 – 1.29 × 10³ CFU/mL) of water samples in the wet season were lower than those (ATP concentration 5.10 × 10^-11 – 6.96 × 10^-8 M, HPC 2 – 1.97 × 10³ CFU/mL) in the dry season throughout the whole MWTS. The microbial activity and biomass of water samples obviously changed along with treatment process. All 300 isolates obtained using cultivation-based techniques were distributed in 5 phyla, 7 classes, and 19 genera. Proteobacteria accounted for 55.7% (167) of the total isolates, among which predominant genus was Pseudomonas (19.3%). Illumina sequencing analysis of 16s rRNA genes revealed 15 bacterial phyla (relative abundance >0.1%) as being identified in all water samples. Among these, Proteobacteria constituted the dominant bacteria microbiota in all water samples. A large shift in the proportion of Bacteroidetes, Actinobacteria, and Firmicutes was obtained during the treatment process, with the proportion of Bacteroidetes, Actinobacteria decreasing sharply, whereas that of Firmicutes increased and predominated in the final water product. The core microbiome, which was still present in whole MWTS comprised several genera including Pseudomonas, Acinetobacter, Clostridium, and Mycobacterium, that contain species that are opportunistic pathogens, suggesting a potential threat for mineral water microbiology safety. This study is the first to investigate the bacterial community of a full-scale mineral water treatment plant in China. The results provided data regarding the bacteria composition and dynamics in an MWTS, which will contribute to the beneficial manipulation of the mineral water microbiome.

Legionella: a reemerging pathogen

PURPOSE OF REVIEW

The present review summarizes new knowledge about Legionella epidemiology, clinical characteristics, community-associated and hospital-based outbreaks, molecular typing and molecular epidemiology, prevention, and detection in environmental and clinical specimens.

RECENT FINDINGS

The incidence of Legionnaire's disease is rising and the mortality rate remains high, particularly for immunocompromised patients. Extracorporeal membrane oxygenation may help support patients with severe respiratory failure. Fluoroquinolones and macrolides appear to be equally efficacious for treating Legionnaires' disease. Whole genome sequencing is an important tool for determining the source for Legionella infections and for understanding routes of transmission and mechanisms by which new pathogenic clones emerge. Real-time quantitative polymerase chain reaction testing of respiratory specimens may improve our ability to diagnose Legionnaire's disease. The frequency of viable but nonculturable organisms is quite high in some water systems but their role in causing clinical disease has not been defined.

SUMMARY

Legionellosis remains an important public health threat. To prevent these infections, staff of municipalities and large buildings must implement effective water system management programs that reduce Legionella growth and transmission and all Medicare-certified healthcare facilities must have water management policies. In addition, we need better methods for detecting Legionella in water systems and in clinical specimens to improve prevention strategies and clinical diagnosis.

Spatio-temporal survey of opportunistic premise plumbing pathogens in the Paris drinking water distribution system

Opportunistic premise plumbing pathogens present in drinking water are linked to a significant number of infections for health compromised patients. However, their monitoring is not required in current water potability standards and they have been poorly studied in a full-scale network. In this study, we quantified, by qPCR, three opportunistic pathogens, Mycobacterium spp., Legionella pneumophila, Pseudomonas aeruginosa throughout the Paris drinking water network over a one-year sampling campaign. While Mycobacteria spp. seemed ubiquitous whatever the distribution system and the time of the year, the occurrence of L. pneumophila and P. aeruginosa showed seasonal variations. Unlike L. pneumophila and P. aeruginosa, the concentration (copies number/L) of Mycobacterium spp. varied between sampling sites. The variation in microbial numbers did not demonstrate any correlations with temperature, pH, chlorine, conductivity, orthophosphate or nitrate levels. In conclusion, Mycobacterium spp. are common inhabitants of the Paris network while L. pneumophila and P. aeruginosa presence fluctuate over space and time. Such qPCR approach would help to better understand the behaviour of opportunistic premise plumbing pathogens.

Nontuberculous mycobacteria in drinking water systems - the challenges of characterization and risk mitigation

Nontuberculous mycobacteria (NTM) pulmonary infections are a growing concern worldwide, with a disproportionate incidence in persons with pre-existing health conditions. NTM have frequently been found in municipally-treated drinking water and building plumbing, leading to the hypothesis that an important source of NTM exposure is drinking water. The identification and quantification of NTM in environmental samples are complicated by genetic variability among NTM species, making it challenging to determine if clinically relevant NTM are present. Additionally, their unique cellular features and lifestyles make NTM and their nucleic acids difficult to recover. This review highlights a recent work focused on quantification and characterization of NTM and on understanding the influence of source water, treatment plants, distribution systems, and building plumbing on the abundance of NTM in drinking water.

Risk-Based Critical Concentrations of Legionella pneumophila for Indoor Residential Water Uses

Legionella spp. is a key contributor to the United States waterborne disease burden. Despite potentially widespread exposure, human disease is relatively uncommon, except under circumstances where pathogen concentrations are high, host immunity is low, or exposure to small-diameter aerosols occurs. Water quality guidance values for Legionella are available for building managers but are generally not based on technical criteria. To address this gap, a quantitative microbial risk assessment (QMRA) was conducted using target risk values in order to calculate corresponding critical concentrations on a per-fixture and aggregate (multiple fixture exposure) basis. Showers were the driving indoor exposure risk compared to sinks and toilets. Critical concentrations depended on the dose response model (infection vs clinical severity infection, CSI), risk target used (infection risk vs disability adjusted life years [DALY] on a per-exposure or annual basis), and fixture type (conventional vs water efficient or "green"). Median critical concentrations based on exposure to a combination of toilet, faucet, and shower aerosols ranged from ∼10^-2 to ∼10⁰ CFU per L and ∼10¹ to ∼10³ CFU per L for infection and CSI dose response models, respectively. As infection model results for critical L. pneumophila concentrations were often below a feasible detection limit for culture-based assays, the use of CSI model results for nonhealthcare water systems with a 10^-6 DALY pppy target (the more conservative target) would result in an estimate of 12.3 CFU per L (arithmetic mean of samples across multiple fixtures and/or over time). Single sample critical concentrations with a per-exposure-corrected DALY target at each conventional fixture would be 1.06 × 10³ CFU per L (faucets), 8.84 × 10³ CFU per L (toilets), and 14.4 CFU per L (showers). Using a 10^-4 annual infection risk target would give a 1.20 × 10³ CFU per L mean for multiple fixtures and single sample critical concentrations of 1.02 × 10⁵, 8.59 × 10⁵, and 1.40 × 10³ CFU per L for faucets, toilets, and showers, respectively. Annual infection risk-based target estimates are in line with most current guidance documents of less than 1000 CFU per L, while DALY-based guidance suggests lower critical concentrations might be warranted in some cases. Furthermore, approximately <10 CFU per mL L. pneumophila may be appropriate for healthcare or susceptible population settings. This analysis underscores the importance of the choice of risk target as well as sampling program considerations when choosing the most appropriate critical concentration for use in public health guidance.

New insights into antibiotic resistome in drinking water and management perspectives: A metagenomic based study of small-sized microbes

The proliferation of antibiotic resistance genes (ARGs) in drinking water and their potential horizontal transfer to pathogenic microbes may cause failure of antibiotics. However, antimicrobial resistome monitoring in drinking water is not currently routine. The bacterial hosts of ARGs, especially small-sized microbes in drinking water, may not be effectively removed by membrane filtration disinfection and thus pose threats to human health. In the present study, using metagenomic based approach, we investigated antibiotic resistome of small-sized microbes (0.2-0.45 μm) in 20 household drinking water samples from 12 cities in Mainland China, Hong Kong and Singapore. A total of 265 ARG subtypes belonging to 17 ARG types were detected at abundances ranging from 4.0 × 10^-2 to 1.0 × 10⁰ copies/cell. Multidrug, bacitracin and aminoglycoside resistance genes are dominant, and 43 ARG subtypes were specifically carried by small-size microbes. Metagenomic assembly strategy revealed fragments of three opportunistic pathogen, i.e. Pseudomonas alcaligenes, Pseudomonas aeruginosa and Mycobacterium gordonae, carried mexW, aph(3')-I and aac(2')-I, respectively. Drinking water samples were classified into three groups based on the presence of ARG, pathogen and ARG-carrying pathogen. These new insights into the antibiotic resistome of small microbes in drinking water over a broad scale indicate the need for more comprehensive ARGs monitoring and surveillance of drinking water supplies. These findings, together with the perspectives and strategies proposed in this study, could support initiatives to improve drinking water safety.

The bioconjugation of DNA with gold nanoparticles towards the spectrophotometric genosensing of pathogenic bacteria

The investigation of important bio-molecular events such as expression of special genes has shown promise with the advent of nanotechnology.

Vermamoeba vermiformis: a Free-Living Amoeba of Interest

Free-living amoebae are protists that are widely distributed in the environment including water, soil, and air. Although the amoebae of the genus Acanthamoeba are still the most studied, other species, such as Vermamoeba vermiformis (formerly Hartmannella vermiformis), are the subject of increased interest. Found in natural or man-made aquatic environments, V. vermiformis can support the multiplication of other microorganisms and is able to harbor and potentially protect pathogenic bacteria or viruses. This feature is to be noted because of the presence of this thermotolerant amoeba in hospital water networks. As a consequence, this protist could be implicated in health concerns and be indirectly responsible for healthcare-related infections. This review highlights, among others, the consequences of V. vermiformis relationships with other microorganisms and shows that this free-living amoeba species is therefore of interest for public health.

Cross-transmission in the Dental Office: Does This Make You Ill?

PURPOSE OF REVIEW

Recently, numerous scientific publications were published which shed new light on the possible risks of infection for dental healthcare workers and their patients. This review aimed to provide the latest insights in the relative risks of transmission of (pathogenic) micro-organisms in the dental office.

RECENT FINDINGS

Of all different routes of micro-organism transmission during or immediately after dental treatment (via direct contact/via blood-blood contact/via dental unit water and aerosols), evidence of transmission is available. However, the recent results put the risks in perspective; infections related to the dental office are most likely when infection control measures are not followed meticulously.

SUMMARY

The risk for transmission of pathogens in a dental office resulting in an infectious disease is still unknown; it seems to be limited in developed countries but it cannot be considered negligible. Therefore, maintaining high standards of infection preventive measures is of high importance for dental healthcare workers to avoid infectious diseases due to cross-contamination.

Pseudomonas-Specific NGS Assay Provides Insight Into Abundance and Dynamics of Pseudomonas Species Including P. aeruginosa in a Cooling Tower

Pseudomonas species are frequent inhabitants of freshwater environments and colonizers of water supply networks via bioadhesion and biofilm formation. P. aeruginosa is the species most commonly associated with human disease, causing a wide variety of infections with links to its presence in freshwater systems. Though several other Pseudomonas species are of ecological and public health importance, little knowledge exists regarding environmental abundances of these species. In the present study, an Illumina-based next-generation sequencing (NGS) approach using Pseudomonas-specific primers targeting the 16S rRNA gene was evaluated and applied to a set of freshwater samples from different environments including a cooling tower sampled monthly during 2 years. Our approach showed high in situ specificity and accuracy. NGS read counts revealed a precise quantification of P. aeruginosa and a good correlation with the absolute number of Pseudomonas genome copies in a validated genus-specific qPCR assay, demonstrating the ability of the NGS approach to determine both relative and absolute abundances of Pseudomonas species and P. aeruginosa. The characterization of Pseudomonas communities in cooling tower water allowed us to identify 43 phylotypes, with P. aeruginosa being the most abundant. A shift existed within each year from a community dominated by phylotypes belonging to P. fluorescens and P. oleovorans phylogenetic groups to a community where P. aeruginosa was highly abundant. Co-occurrence was observed between P. aeruginosa and other phylotypes of P. aeruginosa group as well as the potentially pathogenic species P. stutzeri, but not with phylotypes of the P. fluorescens group, indicating the need to further investigate the metabolic networks and ecological traits of Pseudomonas species. This study demonstrates the potential of deep sequencing as a valuable tool in environmental diagnostics and surveillance of health-related pathogens in freshwater environments.

The cellulose synthase BcsA plays a role in interactions of Salmonella typhimurium with Acanthamoeba castellanii genotype T4

Pathogenic bacteria share their natural habitat with many other organisms such as animals, plants, insects, parasites and amoeba. Interactions between these organisms influence not only the life style of the host organisms, but also modulate bacterial physiology. Adaptation can include biofilm formation, capsule formation, and production of virulence factors. Although biofilm formation is a dominant mode of bacterial life in environmental settings, its role in host-pathogen interactions is not extensively studied. In this work, we investigated the role of molecular pathways involved in rdar biofilm formation in the interaction of Salmonella typhimurium with the Acanthamoeba castellanii genotype T4. Genes coding for the rdar biofilm activator CsgD, the cellulose synthase BcsA, and curli fimbriae subunits CsgBA were deleted from the genome of S. typhimurium. Assessment of interactions of wild-type and mutant strains of S. typhimurium with A. castellanii revealed that deletion of the cellulose synthase BcsA promoted association and uptake by A. castellanii, whereas the interactions with csgD and csgBA mutants were not changed. Our findings suggest that cellulose synthase BcsA inhibits the capabilities of S. typhimurium to associate with and invade into A. castellanii.

Opportunistic Pathogens and Microbial Communities and Their Associations with Sediment Physical Parameters in Drinking Water Storage Tank Sediments

The occurrence and densities of opportunistic pathogens (OPs), the microbial community structure, and their associations with sediment elements from eight water storage tanks in Ohio, West Virginia, and Texas were investigated. The elemental composition of sediments was measured through X-ray fluorescence (XRF) spectra. The occurrence and densities of OPs and amoeba hosts (i.e., Legionella spp. and L. pneumophila, Mycobacterium spp., P. aeruginosa, V. vermiformis, Acanthamoeba spp.) were determined using genus- or species-specific qPCR assays. Microbial community analysis was performed using next generation sequencing on the Illumina Miseq platform. Mycobacterium spp. were most frequently detected in the sediments and water samples (88% and 88%), followed by Legionella spp. (50% and 50%), Acanthamoeba spp. (63% and 13%), V. vermiformis (50% and 25%), and P. aeruginosa (0 and 50%) by qPCR method. Comamonadaceae (22.8%), Sphingomonadaceae (10.3%), and Oxalobacteraceae (10.1%) were the most dominant families by sequencing method. Microbial communities in water samples were mostly separated with those in sediment samples, suggesting differences of communities between two matrices even in the same location. There were associations of OPs with microbial communities. Both OPs and microbial community structures were positively associated with some elements (Al and K) in sediments mainly from pipe material corrosions. Opportunistic pathogens presented in both water and sediments, and the latter could act as a reservoir of microbial contamination. There appears to be an association between potential opportunistic pathogens and microbial community structures. These microbial communities may be influenced by constituents within storage tank sediments. The results imply that compositions of microbial community and elements may influence and indicate microbial water quality and pipeline corrosion, and that these constituents may be important for optimal storage tank management within a distribution system.

Ten Questions Concerning the Aerosolization and Transmission of Legionella in the Built Environment

Legionella is a genus of pathogenic Gram-negative bacteria responsible for a serious disease known as legionellosis, which is transmitted via inhalation of this pathogen in aerosol form. There are two forms of legionellosis: Legionnaires' disease, which causes pneumonia-like symptoms, and Pontiac fever, which causes influenza-like symptoms. Legionella can be aerosolized from various water sources in the built environment including showers, faucets, hot tubs/swimming pools, cooling towers, and fountains. Incidence of the disease is higher in the summertime, possibly because of increased use of cooling towers for air conditioning systems and differences in water chemistry when outdoor temperatures are higher. Although there have been decades of research related to Legionella transmission, many knowledge gaps remain. While conventional wisdom suggests that showering is an important source of exposure in buildings, existing measurements do not provide strong support for this idea. There has been limited research on the potential for Legionella transmission through heating, ventilation, and air conditioning (HVAC) systems. Epidemiological data suggest a large proportion of legionellosis cases go unreported, as most people who are infected do not seek medical attention. Additionally, controlled laboratory studies examining water-to-air transfer and source tracking are still needed. Herein, we discuss ten questions that spotlight current knowledge about Legionella transmission in the built environment, engineering controls that might prevent future disease outbreaks, and future research that is needed to advance understanding of transmission and control of legionellosis.

Host Cell S Phase Restricts Legionella pneumophila Intracellular Replication by Destabilizing the Membrane-Bound Replication Compartment

Legionella pneumophila grows within cells ranging from environmental amoebae to human macrophages. In spite of this conserved strategy of pathogenesis, identification of host factors that restrict L. pneumophila intracellular replication has not been extended outside components of the mammalian innate immune response. We performed a double-stranded RNA (dsRNA) screen against more than 50% of the Drosophila melanogaster annotated open reading frames (ORFs) to identify host cell factors that restrict L. pneumophila. The majority of analyzed dsRNAs that stimulated L. pneumophila intracellular replication were directed against host proteins involved in protein synthesis or cell cycle control. Consistent with disruption of the cell cycle stimulating intracellular replication, proteins involved in translation initiation also resulted in G₁ arrest. Stimulation of replication was dependent on the stage of cell cycle arrest, as dsRNAs causing arrest during S phase had an inhibitory effect on intracellular replication. The inhibitory effects of S phase arrest could be recapitulated in a human cell line, indicating that cell cycle control of L. pneumophila replication is evolutionarily conserved. Synchronized HeLa cell populations in S phase and challenged with L. pneumophila failed to progress through the cell cycle and were depressed for supporting intracellular replication. Poor bacterial replication in S phase was associated with loss of the vacuole membrane barrier, resulting in exposure of bacteria to the cytosol and their eventual degradation. These results are consistent with the model that S phase is inhibitory for L. pneumophila intracellular survival as a consequence of failure to maintain the integrity of the membrane surrounding intracellular bacteria.

Legionella pneumophila has the ability to replicate within human macrophages and amoebal hosts. Here, we report that the host cell cycle influences L. pneumophila intracellular replication. Our data demonstrate that the G₁ and G₂/M phases of the host cell cycle are permissive for bacterial replication, while S phase is toxic for the bacterium. L. pneumophila replicates poorly within host cells present in S phase. The inability of L. pneumophila to replicate relies on its failure to control the integrity of its vacuole, leading to cytosolic exposure of the bacteria and eventual degradation. The data presented here argue that growth-arrested host cells that are encountered by L. pneumophila in either the environment or within human hosts are ideal targets for intracellular replication because their transit through S phase is blocked.

Impact of drinking water treatment and distribution on the microbiome continuum: an ecological disturbance's perspective

While microbes are known to be present at different stages of a drinking water system, their potential functions and ability to grow in such systems are poorly understood. In this study, we demonstrated that treatment and distribution processes could be viewed as ecological disturbances exhibited over space on the microbiome continuum in a groundwater-derived system. Results from 16S rRNA gene amplicon analysis and metagenomics suggested that disturbances in the system were intense as the community diversity was substantially reduced during the treatment steps. Specifically, syntrophs and methanogens dominant in raw water (RW) disappeared after water abstraction, accompanied by a substantial decrease in both the abundance and number of functional genes related to methanogenesis. The softening effluent was dominated by an Exiguobacterium-related population, likely due to its ability to use the phosphotransferase system (PTS) as regulatory machinery to control the energy conditions of the cell. After disinfection and entering the distribution system, community-level functionality remained relatively stable, whereas the community structure differed from those taken in the treatment steps. The diversity and high abundance of some eukaryotic groups in the system suggested that predation could be a disturbance to the bacterial microbiome, which could further drive the diversification of the bacterial community.

Mortality from selected diseases that can be transmitted by water - United States, 2003-2009

Diseases spread by water are caused by fecal-oral, contact, inhalation, or other routes, resulting in illnesses affecting multiple body systems. We selected 13 pathogens or syndromes implicated in waterborne disease outbreaks or other well-documented waterborne transmission (acute otitis externa, Campylobacter, Cryptosporidium, Escherichia coli (E. coli), free-living ameba, Giardia, Hepatitis A virus, Legionella (Legionnaires' disease), nontuberculous mycobacteria (NTM), Pseudomonas-related pneumonia or septicemia, Salmonella, Shigella, and Vibrio). We documented annual numbers of deaths in the United States associated with these infections using a combination of death certificate data, nationally representative hospital discharge data, and disease-specific surveillance systems (2003-2009). We documented 6,939 annual total deaths associated with the 13 infections; of these, 493 (7%) were caused by seven pathogens transmitted by the fecal-oral route. A total of 6,301 deaths (91%) were associated with infections from Pseudomonas, NTM, and Legionella, environmental pathogens that grow in water system biofilms. Biofilm-associated pathogens can cause illness following inhalation of aerosols or contact with contaminated water. These findings suggest that most mortality from these 13 selected infections in the United States does not result from classical fecal-oral transmission but rather from other transmission routes.

Impact of water heater temperature setting and water use frequency on the building plumbing microbiome

Hot water plumbing is an important conduit of microbes into the indoor environment and can increase risk of opportunistic pathogens (for example, Legionella pneumophila). We examined the combined effects of water heater temperature (39, 42, 48, 51 and 58 °C), pipe orientation (upward/downward), and water use frequency (21, 3 and 1 flush per week) on the microbial composition at the tap using a pilot-scale pipe rig. 16S rRNA gene amplicon sequencing indicated that bulk water and corresponding biofilm typically had distinct taxonomic compositions (R²_Adonis=0.246, P_Adonis=0.001), yet similar predicted functions based on PICRUSt analysis (R²_Adonis=0.087, P_Adonis=0.001). Although a prior study had identified 51 °C under low water use frequency to enrich Legionella at the tap, here we reveal that 51 °C is also a threshold above which there are marked effects of the combined influences of temperature, pipe orientation, and use frequency on taxonomic and functional composition. A positive association was noted between relative abundances of Legionella and mitochondrial DNA of Vermamoeba, a genus of amoebae that can enhance virulence and facilitate replication of some pathogens. This study takes a step towards intentional control of the plumbing microbiome and highlights the importance of microbial ecology in governing pathogen proliferation.

Infection Sources of a Common Non-tuberculous Mycobacterial Pathogen, Mycobacterium avium Complex

Numerous studies have revealed a continuous increase in the worldwide incidence and prevalence of non-tuberculous mycobacteria (NTM) diseases, especially pulmonary Mycobacterium avium complex (MAC) diseases. Although it is not clear why NTM diseases have been increasing, one possibility is an increase of mycobacterial infection sources in the environment. Thus, in this review, we focused on the infection sources of pathogenic NTM, especially MAC. The environmental niches for MAC include water, soil, and dust. The formation of aerosols containing NTM arising from shower water, soil, and pool water implies that these niches can be infection sources. Furthermore, genotyping has shown that clinical isolates are identical to environmental ones from household tap water, bathrooms, potting soil, and garden soil. Therefore, to prevent and treat MAC diseases, it is essential to identify the infection sources for these organisms, because patients with these diseases often suffer from reinfections and recurrent infections with them. In the environmental sources, MAC and other NTM organisms can form biofilms, survive within amoebae, and exist in a free-living state. Mycobacterial communities are also likely to occur in these infection sources in households. Water distribution systems are a transmission route from natural water reservoirs to household tap water. Other infection sources include areas with frequent human contact, such as soil and bathrooms, indicating that individuals may carry NTM organisms that concomitantly attach to their household belongings. To explore the mechanisms associated with the global spread of infection and MAC transmission routes, an epidemiological population-wide genotyping survey would be very useful. A good example of the power of genotyping comes from M. avium subsp. hominissuis, where close genetic relatedness was found between isolates of it from European patients and pigs in Japan and Europe, implying global transmission of this bacterium. It is anticipated that whole genome sequencing technologies will improve NTM surveys so that the mechanisms for the global spread of MAC disease will become clearer in the near future. Better understanding of the niches exploited by MAC and its ecology is essential for preventing MAC infections and developing new methods for its effective treatment and elimination.

Dose response models and a quantitative microbial risk assessment framework for the Mycobacterium avium complex that account for recent developments in molecular biology, taxonomy, and epidemiology

Mycobacterium avium complex (MAC) is a group of environmentally-transmitted pathogens of great public health importance. This group is known to be harbored, amplified, and selected for more human-virulent characteristics by amoeba species in aquatic biofilms. However, a quantitative microbial risk assessment (QMRA) has not been performed due to the lack of dose response models resulting from significant heterogeneity within even a single species or subspecies of MAC, as well as the range of human susceptibilities to mycobacterial disease. The primary human-relevant species and subspecies responsible for the majority of the human disease burden and present in drinking water, biofilms, and soil are M. avium subsp. hominissuis, M. intracellulare, and M. chimaera. A critical review of the published literature identified important health endpoints, exposure routes, and susceptible populations for MAC risk assessment. In addition, data sets for quantitative dose-response functions were extracted from published in vivo animal dosing experiments. As a result, seven new exponential dose response models for human-relevant species of MAC with endpoints of lung lesions, death, disseminated infection, liver infection, and lymph node lesions are proposed. Although current physical and biochemical tests used in clinical settings do not differentiate between M. avium and M. intracellulare, differentiating between environmental species and subspecies of the MAC can aid in the assessment of health risks and control of MAC sources. A framework is proposed for incorporating the proposed dose response models into susceptible population- and exposure route-specific QMRA models.