An acidic pectin lyase from Aspergillus niger with favourable efficiency in fruit juice clarification

Enhancing Acid Resistance of Aspergillus niger Pectin Lyase through Surface Charge Design for Improved Application in Juice Clarification

Pectin lyases (PNLs) can enhance juice clarity and flavor by degrading pectin in highly esterified fruits, but their inadequate acid resistance leads to rapid activity loss in juice. This study aimed to improve the acid resistance of Aspergillus niger PNL pelA through surface charge design. A modification platform was established by fusing pelA with a protein tag and expressing the fusion enzyme in Escherichia coli. Four single-point mutants were identified to increase the surface charge using computational tools. Moreover, the combined mutant M6 (S514D/S538E) exhibited 99.8% residual activity at pH 3.0. The M6 gene was then integrated into the A. niger genome using a multigene integration system to obtain the recombinant PNL AM6. Notably, AM6 improved the light transmittance of orange juice to 45.3%, which was 8.39 times higher than that of pelA. In conclusion, AM6 demonstrated the best-reported acid resistance, making it a promising candidate for industrial juice clarification.

High-yield production of acidic pectin lyase PNLZJ5B for juice processing

A pectin lyase gene pnlzj5b from Aspergillus niger ZJ5 was identified and overexpressed successfully in Pichia pastoris. Recombinant PNLZJ5B exhibited high activity toward citrus pectin (150 U mL^-1 ). Through further codon optimization, the expression efficiency of PNLZJ5B in P. pastoris increased to 3.5-fold (532 U mL^-1 /150 U mL^-1 ). PNLZJ5B was purified by ultrafiltration, anion exchange, and gel chromatography. It showed optimal activity and good stability at 58°C and pH 4.5. PNLZJ5B activity improved with increasing degrees of methyl esterification of pectin. The K_m and Vmax values were 0.81 mg mL^-1 and 372.8 μmol·min^-1 ·mg^-1 , respectively. In addition, PNLZJ5B effectively decreased the viscosity of apple juice. Compared with commercial pectin lyase, PNLZJ5B obtained a higher juice volume. These favorable enzymatic properties of PNLZJ5B show potential utility in juice-processing applications and other food-related fields.

Immobilization of Purified Pectin Lyase from Acinetobacter calcoaceticus onto Magnetic Carboxymethyl Cellulose Nanoparticles and Its Usability in Food Industry

An important component of the pectinase enzyme complex is pectin lyase (polymethylgalacturonate lyase; EC 4.2.2.10). In this study, extracellular pectin lyase enzyme was produced from Acinetobacter calcoaceticus bacteria. Pectin lyase was then purified using three-phase precipitation (TPP) technique with 25.5% yield. The pectin lyase was immobilized covalently via the L-glutaraldehyde spacer to the carboxymethyl cellulose. The immobilized pectin lyase was magnetized using Fe3O4 nanoparticles. Purified pectin lyase was connected to magnetized support material after 90 min at the rate of 80%. The most appropriate immobilization conditions were determined as pH 8 and 30°C. By characterizing the free and immobilized enzyme, KM, Vmax, and optimum pH and optimum temperature values were determined. It was optimum pH 8 and temperature 50°C for both free and immobilized pectin lyase. The structural characterization of the immobilized pectin lyase modified with Fe3O4 nanoparticles was carried out by SEM, FT-IR, and XRD chromatographic analyses. At the end of the study, free and immobilized enzymes were used for purification of some fruit juices and results were compared.

Comparative Characterization of Aspergillus Pectin Lyases by Discriminative Substrate Degradation Profiling

Fungal genomes often contain several copies of genes that encode carbohydrate active enzymes having similar activity. The copies usually have slight sequence variability, and it has been suggested that the multigenecity represents distinct reaction optima versions of the enzyme. Whether the copies represent differences in substrate attack proficiencies of the enzyme have rarely been considered. The genomes of Aspergillus species encode several pectin lyases (EC 4.2.2.10), which all belong to polysaccharide lyase subfamily PL1_4 in the CAZy database. The enzymes differ in terms of sequence identity and phylogeny, and exhibit structural differences near the active site in their homology models. These enzymes catalyze pectin degradation via eliminative cleavage of the α-(1,4) glycosidic linkages in homogalacturonan with a preference for linkages between methyl-esterified galacturonate residues. This study examines four different pectin lyases (PelB, PelC, PelD, and PelF) encoded by the same Aspergillus sp. (namely A. luchuensis), and further compares two PelA pectin lyases from two related Aspergillus spp. (A. aculeatus and A. tubingensis). We report the phylogeny, enzyme kinetics, and enzymatic degradation profiles of the enzymes' action on apple pectin, citrus pectin, and sugar beet pectin. All the pectin lyases exerted highest reaction rate on apple pectin [degree of methoxylation (DM) 69%, degree of acetylation (DAc) 2%] and lowest reaction rate on sugar beet pectin (DM 56%, DAc 19%). Activity comparison at pH 5-5.5 produced the following ranking: PelB > PelA > PelD > PelF > PelC. The evolution of homogalacturonan-oligomer product profiles during reaction was analyzed by liquid chromatography with mass spectrometry (LC-MS) detection. This analyses revealed subtle differences in the product profiles indicating distinct substrate degradation preferences amongst the enzymes, notably with regard to acetyl substitutions. The LC-MS product profiling analysis thus disclosed that the multigenecity appears to provide the fungus with additional substrate degradation versatility. This product profiling furthermore represents a novel approach to functionally compare pectin-degrading enzymes, which can help explain structure-function relations and reaction properties of disparate copies of carbohydrate active enzymes. A better understanding of the product profiles generated by pectin modifying enzymes has significant implications for targeted pectin modification in food and biorefinery processes.

Immobilization of Purified Pectin Lyase from Pseudomonas putida onto Magnetic Lily Flowers (Lilium candidum L.) Nanoparticles and Applicability in Industrial Processes

Pectinases are an important class of enzymes distributed in many higher plants and microorganisms. One of these enzymes is pectin lyase which has an important role in industrial applications such as clarification of fruit juices. Pectin lyase was purified with 73% yield from Pseudomonas putida bacteria and was 220.7-fold using three phase precipitation technique. Molecular weight of purified pectin lyase was determined as 32.88 kDa with SDS-polyacrylamide gel electrophoresis. The pectin lyase was immobilized covalently via the L-glutaraldehyde spacer to the cellulosic structures of lily flowers (Lilium candidum L.). The immobilized enzyme was then magnetized by modifying with γ-Fe₃O₄ nanoparticles and determined the most appropriate immobilization conditions as pH 6 and 30 °C. Purified pectin lyase was connected to magnetized support material after 60 min at the rate of 86.4%. The optimum pH and temperatures for the free and immobilized pectin lyase was found to be 6.0 and 40 °C. pH and thermal stabilities of the free and immobilized pectin lyase enzyme have been preserved at high-low temperatures and pH. The structural characterization of the immobilized pectin lyase was performed by SEM, FT-IR, and XRD chromatographic analyses and it was observed that the support materials structure was appropriated to immobilization with pectin lyase and to modify with Fe₃O₄ nanoparticles.

Production pectin oligosaccharides using Humicola insolens Y1-derived unusual pectate lyase

The economical production of pectin oligosaccharides with a specific degree of polymerization and structure from agro-food waste is an industrially important process. This study identified a novel pectate lyase gene (plhy1) from the thermophilic cellulolytic fungus H. insolens Y1 and tested its ability to produce pectin oligosaccharides. The recombinant PLHY1 produced in Pichia pastoris was superior to other similar enzymes due to its high thermal and pH stability. PLHY1 demonstrated optimal enzymatic activity at 55°C and pH 10.0 in the presence of 0.4 mM Ca²⁺, and preferred methyl esterified substrates for digestion. High performance anion exchange chromatography-pulsed amperometric detector and ultra high performance liquid chromatography in combination with electrospray ionization tandem mass spectrometry analysis showed that galacturonic acid-oligosaccharides with a small degree of polymerization (4-6) were the major hydrolysates produced by the degradation of apple peel pectin by PLHY1. The properties of PLHY1 make it valuable for application in the agro-food industry for the production of pectin oligosaccharides.

Pectin Oligosaccharides Ameliorate Colon Cancer by Regulating Oxidative Stress- and Inflammation-Activated Signaling Pathways

Colon cancer (CC) is the third common neoplasm worldwide, and it is still a big challenge for exploring new effective medicine for treating CC. Natural product promoting human health has become a hot topic and attracted many researchers recently. Pectin, a complex polysaccharide in plant cell wall, mainly consists of four major types of polysaccharides: homogalacturonan, xylogalacturonan, rhamnogalacturonan I and II, all of which can be degraded into various pectin oligosaccharides (POS) and may provide abundant resource for exploring potential anticancer drugs. POS have been regarded as a novel class of potential functional food with multiple health-promoting properties. POS have antibacterial activities against some aggressive and recurrent bacterial infection and exert beneficial immunomodulation for controlling CC risk. However, the molecular functional role of POS in the prevention of CC risk and progression remains doubtful. The review focuses on antioxidant and anti-inflammatory roles of POS for promoting human health by regulating some potential oxidative and inflammation-activated pathways, such as ATP-activated protein kinase (AMPK), nuclear factor erythroid-2-related factor-2 (Nrf2), and nuclear factor-κB (NF-κB) pathways. The activation of these signaling pathways increases the antioxidant and antiinflammatory activities, which will result in the apoptosis of CC cells or in the prevention of CC risk and progression. Thus, POS may inhibit CC development by affecting antioxidant and antiinflammatory signaling pathways AMPK, Nrf2, and NF-κB. However, POS also can activate signal transduction and transcriptional activator 1 and 3 signaling pathway, which will reduce antioxidant and anti-inflammatory properties and promote CC progression. Specific structural and structurally modified POS may be associated with their functions and should be deeply explored in the future. The present review paper lacks the important information for the linkage between the specific structure of POS and its function. To further explore the effects of prebiotic potential of POS and their derivatives on human immunomodulation in the prevention of CC, the specific POS with a certain degree of polymerization or purified polymers are highly demanded to be performed in clinical practice.

Purification, characterization and retting of Crotolaria juncea fibres by an alkaline pectin lyase from Fusarium oxysporum MTCC 1755

Using solid-state fermentation, production of an industrially important pectin lyase from a fungal strain Fusarium oxysporum MTCC 1755 was attempted, which was further subjected to purification and characterization. The enzyme was purified by three steps, namely ammonium sulfate fractionation, cation-exchange chromatography on CM cellulose followed by gel filtration chromatography using Sephadex G-100 column. A 16-fold purification with 31.2% yield and 3.2 U/mg specific activity was achieved. The optimum pH of the purified enzyme was 9.0 and stability ranged from pH 5.0-7.0 for 24 h. Optimum temperature of purified enzyme was found to be 40 °C while temperature stability ranged from 10 to 50 °C for 30 min. The K _m and k _cat of the enzyme was 1.75 mg/ml and 83.3 s^-1, respectively. The purified enzyme was found to be highly stimulated by Ca²⁺ ions while sugars like mannitol and sorbitol, and salts like NaCl and CaCl₂ enhanced the thermostability. The purified pectin lyase was found suitable for retting of Crotolaria juncea fiber.

Efficient Expression of an Acidic Endo-polygalacturonase from Aspergillus niger and Its Application in Juice Production

An endo-polygalacturonase gene (pga-zj5a) was cloned by reverse transcription from cDNAs synthesized from Aspergillus niger ZJ5 total RNA. The open reading frame of pga-zj5a was 1089 base pairs encoding 362 amino acids. Pga-zj5a lacking a signal peptide sequence was successfully amplified using A. niger ZJ5 cDNA as the template and was ligated into the pPIC9 vector. The resulting plasmid was transformed into competent cells of Pichia pastoris GS115 for heterologous expression. The polygalacturonase showed a maximum activity level of 10436 U/mL in the culture supernatant from a 3 L fermenter. Assays of enzymatic properties showed that the optimal pH and temperature of the recombinant PGA-ZJ5A were 4.5 and 40 °C, respectively. PGA-ZJ5A was effective in pear juice clarification, increased the volume of pear juice by 41.8%, and improved its light transmittance 3-fold.

A Novel Non-Cumbersome Approach Towards Biosynthesis of Pectic-Oligosaccharides by Non-Aflatoxigenic Aspergillus sp. Section Flavi Strain EGY1 DSM 101520 through Citrus Pectin Fermentation

Pectic-Oligosaccharides (POS) have a growing potential in food and feed industries. To satisfy the demand of worldwide markets from POS and avoid the shortcomings of currently applied methodologies encountered in their preparation, the present study highlights a novel robust approach for POS biosynthesis. In the current approach, Aspergillus sp.section Flavi strain EGY1 DSM 101520 was grown on citrus pectin-based medium as a core POS production medium. POS' levels accumulated in the fungal fermentation broth were optimized through a three step sequential statistical mathematical methodology; Plackett-Burman design (PBD), Box-Behnken design (BBD) and canonical analysis. Three key determinants namely citrus pectin, peptone and NaH2PO4 were pointed out by PBD to impose significant consequences (P<0.05) on the process outcome (POS' levels). Optimal levels of these key determinants along with maximal of POS' levels were set by BBD and canonical analysis to be 2.28% (w/v) citrus pectin, 0.026% (w/v) peptone and 0.28% (w/v) NaH2PO4 to achieve a net amount of 1.3 g POS /2.28 g citrus pectin. Through this approach, a yield of 57% (w/w) POS of the total citrus pectin was obtained after 24 h of fungal growth on optimized citrus pectin-based medium. A fold enhancement of 13 times in POS' levels released in the fermentation fungal broth was realized by the end of the optimization strategy. This novel robust approach is considered a new insight towards POS biosynthesis via efficient, rapid and non-cumbersome procedure. To the best of authors' knowledge, the present work is the first article underlining detailed POS production from the fermentation broth of a fungus growing on citrus pectin-based medium.