Intracuticular wax fixes and restricts strain in leaf and fruit cuticles

Identification of Apple Fruit-Skin Constitutive Laws by Full-Field Methods Using Uniaxial Tensile Loading

The protective and preservative role of apple skin in maintaining the integrity of the fruit is well-known, with its mechanical behaviour playing a pivotal role in determining fruit storage capacity. This study employs a combination of experimental and numerical methodologies, specifically utilising the digital image correlation (DIC) technique. A specially devised inverse strategy is applied to evaluate the mechanical behaviour of apple skin under uniaxial tensile loading. Three apple cultivars were tested in this work: Malus domestica Starking Delicious, Malus pumila Rennet, and Malus domestica Golden Delicious. Stress-strain curves were reconstructed, revealing distinct variations in the mechanical responses among these cultivars. Yeoh's hyperelastic model was fitted to the experimental data to identify the coefficients capable of reproducing the non-linear deformation. The results suggest that apple skin varies significantly in composition and structure among the tested cultivars, as evidenced by differences in elastic properties and non-linear behaviour. These differences can significantly affect how fruit is handled, stored, and transported. Thus, the insights resulting from this research enable the development of mathematical models based on the mechanical behaviour of apple tissue, constituting important data for improvements in the economics of the agri-food industry.

Microcracking of strawberry fruit cuticles: mechanism and factors

Microscopic cracks in the cuticle (microcracks) are the first symptom of the strawberry fruit disorder 'water soaking' in which the fruit surface appears watery, translucent, and pale. Water soaking severely impacts fruit quality. The objective was to investigate the factors and mechanisms of cuticular microcracking in strawberry. Fluorescence microscopy revealed numerous microcracks in the achene depressions, on the rims between depressions and at the bases of trichomes. Microcracks in the achene depressions and on the rims were either parallel or transversely oriented relative to a radius drawn from the rim to the point of attachment of the achene. In the achene depression, the frequency of microcracks with parallel orientation decreased from the calyx end of the fruit, towards the fruit tip, while the frequency of those with transverse orientation remained constant. Most microcracks occurred above the periclinal cell walls of the epidermal cells. The long axes of the epidermal cells were primarily parallel-oriented. Microcracking increased during fruit development. Cuticle mass per fruit remained constant as fruit surface area increased but cuticle thickness decreased. When fruit developed under high relative humidity (RH) conditions, the cuticle had more microcracks than under low RH conditions. Exposing the fruit surface to increasing RHs, increased microcracking, especially above 75% RH. Liquid-phase water on the fruit surface was markedly more effective in inducing microcracking than high vapor-phase water (high RH). The results demonstrate that a combination of surface area growth strain and water exposure is causal in inducing microcracking of the strawberry cuticle.

Neck shrivel in European plum is caused by cuticular microcracks, resulting from rapid lateral expansion of the neck late in development

MAIN CONCLUSION

Susceptibility to neck shrivel in European plum is due to cuticular microcracking resulting from high surface area growth rates in the neck region, late in development. Susceptibility to the commercially important fruit disorder 'neck shrivel' differs among European plum cultivars. Radial cuticular microcracking occurs in the neck regions of susceptible cultivars, but not in non-susceptible ones, so would seem to be causal. However, the reason for the microcracking is unknown. The objective was to identify potential relationships between fruit growth pattern and microcracking incidence in the neck (proximal) and stylar (distal) ends of selected shrivel-susceptible and non-susceptible cultivars. Growth analysis revealed two allometric categories: The first category, the 'narrow-neck' cultivars, showed hypoallometric growth in the neck region (i.e., slower growth than in the region of maximum diameter) during early development (stages I + II). Later (during stage III) the neck region was 'filled out' by hyperallometric growth (i.e., faster than in the region of maximum diameter). The second category, the 'broad-neck' cultivars, had more symmetrical, allometric growth (all regions grew equally fast) throughout development. The narrow-neck cultivars exhibited extensive radial cuticular microcracking in the neck region, but little microcracking in the stylar region. In contrast, the broad-neck cultivars exhibited little microcracking overall, with no difference between the neck and stylar regions. Across all cultivars, a positive relationship was obtained for the level of microcracking in the neck region and the difference in allometric growth ratios between stage III and stages I + II. There were no similar relationships for the stylar region. The results demonstrate that accelerated stage III neck growth in the narrow-neck plum cultivars is associated with more microcracking and thus with more shrivel.

Cuticle architecture and mechanical properties: a functional relationship delineated through correlated multimodal imaging

Cuticles are multifunctional hydrophobic biocomposites that protect the aerial organs of plants. During plant development, plant cuticles must accommodate different mechanical constraints combining extensibility and stiffness, and the corresponding relationships with their architecture are unknown. Recent data showed a fine-tuning of cuticle architecture during fruit development, with several chemical clusters which raise the question of how they impact the mechanical properties of cuticles. We investigated the in-depth nanomechanical properties of tomato (Solanum lycopersicum) fruit cuticle from early development to ripening, in relation to chemical and structural heterogeneities by developing a correlative multimodal imaging approach. Unprecedented sharps heterogeneities were evidenced including an in-depth mechanical gradient and a 'soft' central furrow that were maintained throughout the plant development despite the overall increase in elastic modulus. In addition, we demonstrated that these local mechanical areas are correlated to chemical and structural gradients. This study shed light on fine-tuning of mechanical properties of cuticles through the modulation of their architecture, providing new insight for our understanding of structure-function relationships of plant cuticles and for the design of bioinspired material.

3D (x-y-t) Raman imaging of tomato fruit cuticle: Microchemistry during development

The cuticle is a protective extracellular matrix that covers the above-ground epidermis of land plants. Here, we studied the cuticle of tomato (Solanum lycopersicum L.) fruits in situ using confocal Raman microscopy. Microsections from cuticles isolated at different developmental stages were scanned to visualize cuticle components with a spatial resolution of 342 nm by univariate and multivariate data analysis. Three main components, cutin, polysaccharides, and aromatics, were identified, with the latter exhibiting the strongest Raman scattering intensity. Phenolic acids and flavonoids were differentiated within the cuticle, and three schematic cuticle models were identified during development. Phenolic acids were found across the entire cuticle at the earliest stage of development, i.e. during the formation of the procuticle layer. Based on a mixture analysis with reference component spectra, the phenolic acids were identified as mainly esterified p-coumaric acid together with free p-hydroxybenzoic acid. During the cell expansion period of growth, phenolic acids accumulated in an outermost layer of the cuticle and in the middle region of the pegs. In these stages of development, cellulose and pectin were detected next to the inner cuticle region, close to the epidermal cell where flavonoid impregnation started during ripening. In the first ripening stage, chalconaringenin was observed, while methoxylated chalcones were chosen by the algorithm to fit the mature cuticle spectra. The colocation of carbohydrates, esterified p-coumaric acid, and methoxylated chalconaringenin suggests that the latter two link polysaccharide and cutin domains. Elucidating the different distribution of aromatics within the cuticle, suggests important functions: (1) overall impregnation conferring mechanical and thermal functions (2) the outermost phenolic acid layer displaying UV-B protection of the plant tissue.

Effects of preharvest sprays of iodine, selenium and calcium on apple biofortification and their quality and storability

The low dietary intake of iodine (I) and selenium (Se) by humans leads to serious health and socioeconomic problems. Therefore, enrichment of plants with I and Se using fertilisers containing these micronutrients is commonly recommended. In this study, we examined the impacts of combined spraying of I as iodide or iodate, Se as selenite or selenate, and calcium (Ca) as Ca-chloride on the enrichment of 'Red Jonaprince' (Malus domestica Borth.) apples, as well as fruit quality and their storability. Sprays were applied 2 weeks before harvest at rates of 0.5 kg I, 0.25 kg Se and 7 kg Ca per ha. Trees not sprayed with these nutrients served as controls. The tested sprays caused leaf burn, but they did not affect the cold injury of buds and shoots. Those sprays had no effect on yield, fruit size and russeting or skin colouring. At harvest, sprayed apples contained about 50 times more I and Se and 30% more Ca than the control fruit. After storage, compared to the control fruit, sprayed apples were firmer, had more organic acids and were less susceptible to disorders, such as bitter pit, internal breakdown and decay caused by Neofabraea spp. The results indicate that preharvest spraying with I, Se and Ca at high rates can be recommended to effectively enrich apples with I and Se and to simultaneously improve their storability.

Misregulation of MYB16 expression causes stomatal cluster formation by disrupting polarity during asymmetric cell divisions

Stomatal pores and the leaf cuticle regulate evaporation from the plant body and balance the tradeoff between photosynthesis and water loss. MYB16, encoding a transcription factor involved in cutin biosynthesis, is expressed in stomatal lineage ground cells, suggesting a link between cutin biosynthesis and stomatal development. Here, we show that the downregulation of MYB16 in meristemoids is directly mediated by the stomatal master transcription factor SPEECHLESS (SPCH) in Arabidopsis thaliana. The suppression of MYB16 before an asymmetric division is crucial for stomatal patterning, as its overexpression or ectopic expression in meristemoids increased stomatal density and resulted in the formation of stomatal clusters, as well as affecting the outer cell wall structure. Expressing a cutinase gene in plants ectopically expressing MYB16 reduced stomatal clustering, suggesting that cutin affects stomatal signaling or the polarity setup in asymmetrically dividing cells. The clustered stomatal phenotype was rescued by overexpressing EPIDERMAL PATTERNING FACTOR2, suggesting that stomatal signaling was still functional in these plants. Growing seedlings ectopically expressing MYB16 on high-percentage agar plates to modulate tensile strength rescued the polarity and stomatal cluster defects of these seedlings. Therefore, the inhibition of MYB16 expression by SPCH in the early stomatal lineage is required to correctly place the polarity protein needed for stomatal patterning during leaf morphogenesis.

Sculpting the surface: Structural patterning of plant epidermis

Plant epidermis are multifunctional surfaces that directly affect how plants interact with animals or microorganisms and influence their ability to harvest or protect from abiotic factors. To do this, plants rely on minuscule structures that confer remarkable properties to their outer layer. These microscopic features emerge from the hierarchical organization of epidermal cells with various shapes and dimensions combined with different elaborations of the cuticle, a protective film that covers plant surfaces. Understanding the properties and functions of those tridimensional elements as well as disentangling the mechanisms that control their formation and spatial distribution warrant a multidisciplinary approach. Here we show how interdisciplinary efforts of coupling modern tools of experimental biology, physics, and chemistry with advanced computational modeling and state-of-the art microscopy are yielding broad new insights into the seemingly arcane patterning processes that sculpt the outer layer of plants.

Direct Evidence for a Radial Gradient in Age of the Apple Fruit Cuticle

The pattern of cuticle deposition plays an important role in managing strain buildup in fruit cuticles. Cuticular strain is the primary trigger for numerous fruit-surface disorders in many fruit crop species. Recent evidence indicates a strain gradient may exist within the apple fruit cuticle. The outer layers of the cuticle are more strained and thus more susceptible to microcracking than the inner layers. A radial gradient in cuticle age is the most likely explanation. Our study aimed to establish whether (or not) deposition of new cutin in a developing apple fruit occurs on the inner surface of the cuticle, i.e., immediately abutting the outward-facing epidermal cell wall. Developing apples were fed with ¹³C oleic acid through the skin. Following a 14-d period for incorporation, the fruit was harvested and the cuticular membranes (CMs) isolated enzymatically. The CMs were then ablated to varying extents from the inner or the outer surfaces, using a cold atmospheric pressure plasma (CAPP). Afterwards, the ablated CMs were dewaxed and the ¹³C contents were determined by mass spectrometry. The incorporation of ¹³C in the cutin fraction was higher than in the wax fraction. The ¹³C content was highest in non-ablated, dewaxed CM (DCM) and decreased as ablation depth from the inner surface increased. There was no change in ¹³C content when ablation was carried out from the outer surface. As fruit development proceeded, more ¹³C label was found towards the middle of the DCM. These results offered direct evidence for deposition of cutin being on the inner surface of the cuticle, resulting in a radial gradient in cuticular age-the most recent deposition (youngest) being on the inner cuticle surface (abutting the epidermal cell wall) and the earliest deposition (oldest) being on the outer surface (abutting the atmosphere).

Low cuticle deposition rate in 'Apple' mango increases elastic strain, weakens the cuticle and increases russet

Russeting compromises appearance and downgrades the market value of many fruitcrops, including of the mango cv. ‘Apple’. The objective was to identify the mechanistic basis of ‘Apple’ mango’s high susceptibility to russeting. We focused on fruit growth, cuticle deposition, stress/strain relaxation analysis and the mechanical properties of the cuticle. The non-susceptible mango cv. ‘Tommy Atkins’ served for comparison. Compared with ‘Tommy Atkins’, fruit of ‘Apple’ had a lower mass, a smaller surface area and a lower growth rate. There were little differences between the epidermal and hypodermal cells of ‘Apple’ and ‘Tommy Atkins’ including cell size, cell orientation and cell number. Lenticel density decreased during development, being lower in ‘Apple’ than in ‘Tommy Atkins’. The mean lenticel area increased during development but was consistently greater in ‘Apple’ than in ‘Tommy Atkins’. The deposition rate of the cuticular membrane was initially rapid but later slowed till it matched the area expansion rate, thereafter mass per unit area was effectively constant. The cuticle of ‘Apple’ is thinner than that of ‘Tommy Atkins’. Cumulative strain increased sigmoidally with fruit growth. Strains released stepwise on excision and isolation (ε_exc+iso), and on wax extraction (ε_extr) were higher in ‘Apple’ than in ‘Tommy Atkins’. Membrane stiffness increased during development being consistently lower in ‘Apple’ than in ‘Tommy Atkins’. Membrane fracture force (F_max) was low and constant in developing ‘Apple’ but increased in ‘Tommy Atkin’. Membrane strain at fracture (ε_max) decreased linearly during development but was lower in ‘Apple’ than in ‘Tommy Atkins’. Frequency of membrane failure associated with lenticels increased during development and was consistently higher in ‘Apple’ than in ‘Tommy Atkins’. The lower rate of cuticular deposition, the higher strain releases on excision, isolation and wax extraction and the weaker cuticle account for the high russet susceptibility of ‘Apple’ mango.

Water Sorption and Desorption of Isolated Cuticles From Three Woody Species With Focus on Ilex aquifolium

The cuticle is a lipid-rich layer that protects aerial plant organs against multiple stress factors such as dehydration. In this study, cuticle composition and structure in relation to water loss are examined in a broad ecophysiological context, taking into consideration leaf age and side from Ilex aquifolium (holly) in comparison with Eucalyptus globulus (eucalypt) and Prunus laurocerasus (cherry laurel). Enzymatically isolated cuticular membranes from holly leaves were studied under three treatment conditions: natural (no chemical treatment), after dewaxing, and after methanolysis, and the rate of water loss was assessed. Structural and chemical changes were evaluated using different microscopy techniques and by Fourier transform infrared (FTIR) spectroscopy. The potential mechanisms of solute absorption by holly leaves were additionally evaluated, also testing if its prickly leaf margin may facilitate uptake. The results indicate that the treatment conditions led to structural changes, and that chemical composition was hardly affected because of the occurrence of cutan. Structural changes led to more hydrophilic adaxial surfaces, which retained more water and were more efficient than natural cuticles, while changes were not significant for abaxial surfaces. Across natural cuticles, age was a significant factor for eucalypt but not for holly. Young eucalypt cuticles were the group that absorbed more water and had the lowest water loss rate. When comparing older leaf cuticles of the three species, cherry laurel was found to absorb more water, which was, however, lost more slowly, compared with the other species. Evidence was gained that holly leaves can absorb foliar-applied solutes (traced after calcium chloride application) through the adaxial and abaxial surfaces, the adaxial mid veins, and to a lower extent, the spines. In conclusion, for the species examined, the results show variations in leaf cuticle composition and structure in relation to leaf ontogeny, and water sorption and desorption capacity.

Cuticle and skin cell walls have common and unique roles in grape berry splitting

The skin protects a fruit from environmental stresses and supports the fruit's structure. Failure of the skin leads to fruit splitting and may compromise commercial production for fruit growers. The mechanical properties of the cuticle and skin cell walls might influence the splitting susceptibility of fleshy fruits. Thin shell theory and fracture mechanics were utilized in this study to target the potential factors contributing to splitting susceptibility. The study analyzed the structure of the cuticle and epidermis in ripening grape berries and examined the temporal dynamics of berry splitting. Cuticular waxes were partially removed, and skin cell walls were manipulated using wall stiffening and loosening solutions that altered reactions involving hydrogen peroxide. A more than twofold difference in cuticle thickness among grape cultivars did not account for their differences in splitting resistance. However, while removing predominantly epicuticular wax did not alter the berries' splitting resistance, their surface appearance and increasing yield strength following partial wax removal support the notion that cuticular waxes contribute to berry mechanical properties. Immersing berries in H₂O₂-based cell wall loosening solutions increased the splitting probability and accelerated berry splitting, whereas cell wall stiffening solutions decreased the splitting probability and delayed berry splitting. These results showed that both cuticle and skin cell walls contribute to the mechanical properties of grape berries and to their splitting resistance. The results also suggest that the two current explanations for fruit splitting, the critical turgor model and the zipper model, should be viewed as complementary rather than incompatible.

Very-Long-Chain Wax Constituents from Primula veris and P. acaulis: Does the Paradigm of Non-Branched vs. Branched Chain Dominance Universally Hold in all Plant Taxa?

Herein n-, iso- and anteiso-series of very-long-chained (VLC) alkanes (C₂₁ -C₃₅ ), fatty acid benzyl esters (FABEs; C₂₀ -C₃₂ ), and 2-alkanones (C₂₃ -C₃₅ ) were identified in the wax of Primula veris L. and P. acaulis (L.) L. (Primulaceae). For the very first time in a sample of natural origin, the presence of iso- and anteiso-VLC FABEs and 2-alkanones was unequivocally confirmed by synthetic work, derivatization, and NMR. It should be noted that the studied species produced unusually high amounts of branched wax constituents (e. g., >50 % of 2-alkanones were branched isomers). The domination of iso-isomers, probably biosynthesized from leucine-derived starters, is a unique feature in the Plant Kingdom. The plant organ distribution of these VLC compounds in P. acaulis samples (different habitats and phenological phases) pointed to their possible ecological value. This was supported by a eutectic behavior of binary blends of FABEs and alkanes, as well as by high UV-C absorption by FABEs.

Genome-wide QTL analysis of tomato fruit cuticle deposition and composition

Genetics of traits related to fruit cuticle deposition and composition was studied in two red-fruited tomato species. Two mapping populations derived from the cross between the cultivated tomato (Solanum lycopersicum L.) and its closest relative wild species Solanum pimpinellifolium L. were employed to conduct a QTL analysis. A combination of fruit cuticle deposition, components and anatomical traits were investigated and the individual effect of each QTL evaluated. A total of 70 QTLs were identified, indicating that all the cuticle traits analyzed have a complex polygenic nature. A combination of additive and epistatic interactions was observed for all the traits, with positive contribution of both parental lines to most of them. Colocalization of QTLs for various traits uncovered novel genomic regions producing extensive changes in the cuticle. Cuticle density emerges as an important trait since it can modulate cuticle thickness and invagination thus providing a strategy for sustaining mechanical strength without compromising palatability. Two genomic regions, located in chromosomes 1 and 12, are responsible for the negative interaction between cuticle waxes and phenolics identified in tomato fruit. Several candidate genes, including transcription factors and structural genes, are postulated and their expression analyzed throughout development.

Structure, Assembly and Function of Cuticle from Mechanical Perspective with Special Focus on Perianth

This review is devoted to the structure, assembly and function of cuticle. The topics are discussed from the mechanical perspective and whenever the data are available a special attention is paid to the cuticle of perianth organs, i.e., sepals, petals or tepals. The cuticle covering these organs is special in both its structure and function and some of these peculiarities are related to the cuticle mechanics. In particular, strengthening of the perianth surface is often provided by a folded cuticle that functionally resembles profiled plates, while on the surface of the petal epidermis of some plants, the cuticle is the only integral continuous layer. The perianth cuticle is distinguished also by those aspects of its mechanics and development that need further studies. In particular, more investigations are needed to explain the formation and maintenance of cuticle folding, which is typical for the perianth epidermis, and also to elucidate the mechanical properties and behavior of the perianth cuticle in situ. Gaps in our knowledge are partly due to technical problems caused by very small thicknesses of the perianth cuticle but modern tools may help to overcome these obstacles.

Cutin Synthesis in Developing, Field-Grown Apple Fruit Examined by External Feeding of Labelled Precursors

An intact skin is essential in high-quality apples. Ongoing deposition of cuticular material during fruit development may decrease microcracking. Our objective was to establish a system for quantifying cutin and wax deposition in developing apple fruit. Oleic acid (13C and 14C labelled) and palmitic acid (14C labelled) were fed to developing apples and the amounts incorporated in the cutin and wax fractions were quantified. The incorporation of 14C oleic acid (C18) was significantly higher than that of 14C palmitic acid (C16) and the incorporation in the cutin fraction exceeded that in the wax fraction. The amount of precursor incorporated in the cutin increased asymptotically with time, but the amount in the wax fraction remained about constant. Increasing the concentration of the precursor applied generally increased incorporation. Incorporation in the cutin fraction was high during early development (43 days after full bloom) and decreased towards maturity. Incorporation was higher from a dilute donor solution (infinite dose feeding) than from a donor solution subjected to drying (finite dose feeding) or from perfusion of the precursor by injection. Feeding the skin of a developing apple with oleic acid resulted in significant incorporation in the cutin fraction under both laboratory and field conditions.

Developmental pattern of grapevine (Vitis vinifera L.) berry cuticular wax: Differentiation between epicuticular crystals and underlying wax

The grapevine berry surface is covered by a cuticle consisting of cutin and various lipophilic wax compounds. The latter build the main barrier for transpirational water loss and protect the fruit against environmental factors e.g. pests, mechanical impacts or radiation. The integrety of the fruit surface is one important key factor for post-harvest quality and storage of fruits. Nonetheless, the developmental pattern of cuticular wax was so far only investigated for a very limited number of fruits. Therefore, we performed comparative investigations on the compositional and morphological nature of epicuticular wax crystals and underlying wax during fruit development in Vitis vinifera. The main compound oleanolic acid belongs to the pentacyclic triterpenoids, which occur very early in the development in high amounts inside the cuticle. The amount increases until veraison and decreases further during ripening. In general, very-long chain aliphatic (VLCA) compounds are present in much smaller amounts and alcohols and aldehydes follow the same trend during development. In contrast, the amount of fatty acids constantly increases from fruit set to ripening while wax esters only occur in significant amount at veraison and increase further. Wax crystals at the fruit surface are solely composed of VLCAs and the morphology changes during development according to the compositional changes of the VLCA wax compounds. The remarkable compositional differences between epicuticular wax crystals and the underlying wax are important to understand in terms of studying grape-pest interactions or the influence of environmental factors, since only wax crystals directly face the environment.

Mechanical Performances of Isolated Cuticles Along Tomato Fruit Growth and Ripening

The cuticle is the most external layer that protects fruits from the environment and constitutes the first shield against physical impacts. The preservation of its mechanical integrity is essential to avoid the access to epidermal cell walls and to prevent mass loss and damage that affect the commercial quality of fruits. The rheology of the cuticle is also very important to respond to the size modification along fruit growth and to regulate the diffusion of molecules from and toward the atmosphere. The mechanical performance of cuticles is regulated by the amount and assembly of its components (mainly cutin, polysaccharides, and waxes). In tomato fruit cuticles, phenolics, a minor cuticle component, have been found to have a strong influence on their mechanical behavior. To fully characterize the biomechanics of tomato fruit cuticle, transient creep, uniaxial tests, and multi strain dynamic mechanical analysis (DMA) measurements have been carried out. Two well-differentiated stages have been identified. At early stages of growth, characterized by a low phenolic content, the cuticle displays a soft elastic behavior. Upon increased phenolic accumulation during ripening, a progressive stiffening is observed. The increment of viscoelasticity in ripe fruit cuticles has also been associated with the presence of these compounds. The transition from the soft elastic to the more rigid viscoelastic regime can be explained by the cooperative association of phenolics with both the cutin and the polysaccharide fractions.

Surface moisture increases microcracking and water vapour permeance of apple fruit skin

Surface moisture induces microcracking in the cuticle of fruit skins. Our objective was to study the effects of surface moisture on cuticular microcracking, the permeance to water vapour and russeting in developing 'Pinova' apple fruit. Surface moisture was applied by fixing to the fruit a plastic tube containing deionized water. Microcracking was quantified by fluorescence microscopy and image analysis following infiltration with acridine orange. Water vapour permeance was determined gravimetrically using skin segments (ES) mounted in diffusion cells. Cumulative water loss through the ES increased linearly with time. Throughout development, surface moisture significantly increased skin permeance. The effect was largest during early development and decreased towards maturity. Recovery time courses revealed that following moisture treatment of young fruit for 12 days, skin permeance continued to increase until about 14 days after terminating the moisture treatment. Thereafter, skin permeance decreased over the next 28 days, then approaching the control level. This behaviour indicates gradual healing of the impaired cuticular barrier. Nevertheless, permeance still remained significantly higher compared with the untreated control. Similar patterns of permeance change were observed following moisture treatments at later stages of development. The early moisture treatment beginning at 23 DAFB resulted in russeting of the exposed surfaces. There was no russet in control fruit without a tube or in control fruit with a tube mounted for 12 days without water. The data demonstrate that surface moisture increases microcracking and water vapour permeance. This may lead to the formation of a periderm and, hence, a russeted fruit surface.

Russeting in Apple is Initiated after Exposure to Moisture Ends: Molecular and Biochemical Evidence

Exposure of the fruit surface to moisture during early development is causal in russeting of apple (Malus × domestica Borkh.). Moisture exposure results in formation of microcracks and decreased cuticle thickness. Periderm differentiation begins in the hypodermis, but only after discontinuation of moisture exposure. Expressions of selected genes involved in cutin, wax and suberin synthesis were quantified, as were the wax, cutin and suberin compositions. Experiments were conducted in two phases. In Phase I (31 days after full bloom) the fruit surface was exposed to moisture for 6 or 12 d. Phase II was after moisture exposure had been discontinued. Unexposed areas on the same fruit served as unexposed controls. During Phase I, cutin and wax synthesis genes were down-regulated only in the moisture-exposed patches. During Phase II, suberin synthesis genes were up-regulated only in the moisture-exposed patches. The expressions of cutin and wax genes in the moisture-exposed patches increased slightly during Phase II, but the levels of expression were much lower than in the control patches. Amounts and compositions of cutin, wax and suberin were consistent with the gene expressions. Thus, moisture-induced russet is a two-step process: moisture exposure reduces cutin and wax synthesis, moisture removal triggers suberin synthesis.

Wax composition and concentration in jujube (Ziziphus jujuba Mill.) cultivars with differential resistance to fruit cracking

Fruit cracking is a key problem restricting the development of the jujube (Ziziphus jujuba) industry, and is closely related to the distribution of the wax layer on the surface of the fruit. Three jujube cultivars with different levels of cracking resistance, namely 'Popozao', 'Banzao', and 'Hupingzao', were selected for comparison. Cracks on the cuticular membrane (CM) of 'Hupingzao' widened and deepened during the coloring period. The wax level of highly cracking-resistant 'Popozao' was significantly higher than that of 'Hupingzao' during the fruit coloring period. The fruit wax composition of the three jujube cultivars were quite similar, consisting mainly of alkanes, triterpenoids, aldehydes, amines, phenols, esters, ketones, fatty acids, primary alcohols, and other, unclassified compounds. Fatty acids, primary alcohols, and alkanes were the predominant fruit wax compounds of the three cultivars. We further analyzed the carbon chain length of aliphatic compounds and found that the concentration of fatty acids in 'Popozao' was significantly lower than that in 'Banzao' and 'Hupingzao' during the coloring period. Moreover, C28-30 were the most abundant primary alcohols during fruit development. Highly cracking-resistant cultivar 'Popozao' contains more very-long-chain alkanes and aldehydes (carbon atom >20) than 'Banzao' and 'Hupingzao' during the coloring period. In addition, we assessed the expression levels of 11 genes involved in fatty acid biosynthesis, elongation, and degradation, and in wax biosynthesis. Gene expression analysis indicated that KCS1, CER1, CYP86B1, and CYP86A play crucial roles in wax formation on jujube fruit. In conclusion, fruit cracking was correlated with whether wax synthesis is coordinated with fruit enlargement and'Popozao' has a stronger ability to synthesize very-long-chain alkanes and aldehydes. Understanding the diff ;erences in the cuticular wax and the activities of the corresponding genes in jujube cultivars with different sensitivities to cracking will provide a specific way to prevent fruit cracking.

Chemical composition of the cuticular membrane in guava fruit (Psidium guajava L.) affects barrier property to transpiration

The cuticular membrane covering almost all aerial plant organs has a primary function in limiting uncontrolled water loss. The guava fruits were collected and this work was done to study the potential contribution of cuticular chemical composition to fruit transpiration after harvest. The detailed cuticular chemical composition, based on gas chromatography together with mass spectrometry, and the transpiration rate determined gravimetrically in guava fruit were characterized in the present study. The predominant wax mixtures were fatty acids and primary alcohols with homologous series of C₁₆-C₃₃, as well as various pentacyclic triterpenoids with abundant amounts of ursolic acid, maslinic acid and uvaol. The most prominent cutin compounds were C₁₆ and C₁₈‒type monomers dominated by 9(10),16-diOH-hexadecanoic acid and 9,10-epoxy-ω-OH-octadecanoic acid, respectively. Relatively high water permeability with a value of 5.1 × 10^-4 m s^-1 was detected for guava fruit. The lower efficiency of the cuticle as barrier to transpiration in guava fruit, as compared to that of other reported fruits, leaves, and petals, was seemingly related to the relatively short average chain-length of acyclic compounds in wax mixtures. These findings provide useful insights linking the chemical composition of the cuticular membrane that covers plant organs to putative physiological roles.

Russeting in Apple Is Initiated After Exposure to Moisture Ends-I. Histological Evidence

Russeting (periderm formation) is a critical fruit-surface disorder in apple (Malus × domestica Borkh.). The first symptom of insipient russeting is cuticular microcracking. Humid and rainy weather increases russeting. The aim was to determine the ontogeny of moisture-induced russeting in 'Pinova' apple. We recorded the effects of duration of exposure to water and the stage of fruit development at exposure on microcracking, periderm formation and cuticle deposition. Early on (21 or 31 days after full bloom; DAFB) short periods (2 to 12 d) of moisture exposure induced cuticular microcracking-but not later on (66 or 93 DAFB). A periderm was not formed during moisture exposure but 4 d after exposure ended. A periderm was formed in the hypodermis beneath a microcrack. Russeting frequency and severity were low for up to 4 d of moisture exposure but increased after 6 d. Cuticle thickness was not affected by moisture for up to 8 d but decreased for longer exposures. Cuticular ridge thickness decreased around a microcrack. In general, moisture did not affect cuticular strain release. We conclude that a hypodermal periderm forms after termination of moisture exposure and after microcrack formation. Reduced cuticle deposition may cause moisture-induced microcracking and, thus, russeting.

Leaf cuticle analyses: implications for the existence of cutan/non-ester cutin and its biosynthetic origin

BACKGROUND AND AIMS

The cuticle of a limited number of plant species contains cutan, a chemically highly resistant biopolymer. As yet, the biosynthesis of cutan is not fully understood. Attempting to further unravel the origin of cutan, we analysed the chemical composition of enzymatically isolated cuticular membranes of Agave americana leaves.

METHODS

Cuticular waxes were extracted with organic solvents. Subsequently, the dewaxed cuticular membrane was depolymerized by acid-catalysed transesterification yielding cutin monomers and cutan, a non-hydrolysable, cuticular membrane residue. The cutan matrix was analysed by thermal extraction, flash pyrolysis and thermally assisted hydrolysis and methylation to elucidate the monomeric composition and deduce a putative biosynthetic origin.

KEY RESULTS

According to gas chromatography-mass spectrometry analyses, the cuticular waxes of A. americana contained primarily very-long-chain alkanoic acids and primary alkanols dominated by C32, whereas the cutin biopolyester of A. americana mainly consisted of 9,10-epoxy ω-hydroxy and 9,10,ω-trihydroxy C18 alkanoic acids. The main aliphatic cutan monomers were alkanoic acids, primary alkanols, ω-hydroxy alkanoic acids and alkane-α,ω-diols ranging predominantly from C28 to C34 and maximizing at C32. Minor contributions of benzene-1,3,5-triol and derivatives suggested that these aromatic moieties form the polymeric core of cutan, to which the aliphatic moieties are linked via ester and possibly ether bonds.

CONCLUSIONS

High similarity of aliphatic moieties in the cutan and the cuticular wax component indicated a common biosynthetic origin. In order to exclude species-specific peculiarities of A. americana and to place our results in a broader context, cuticular waxes, cutin and cutan of Clivia miniata, Ficus elastica and Prunus laurocerasus leaves were also investigated. A detailed comparison showed compositional and structural differences, indicated that cutan was only found in leaves of perennial evergreen A. americana and C. miniata, and made clear that the phenomenon of cutan is possibly less present in plant species than suggested in the literature.

Drought stress modulates cuticular wax composition of the grape berry

Drought events are a major challenge for many horticultural crops, including grapes, which are often cultivated in dry and warm climates. It is not understood how the cuticle contributes to the grape berry response to water deficit (WD); furthermore, the cuticular waxes and the related biosynthetic pathways are poorly characterized in this fruit. In this study, we identified candidate wax-related genes from the grapevine genome by phylogenetic and transcriptomic analyses. Developmental and stress response expression patterns of these candidates were characterized across pre-existing RNA sequencing data sets and confirmed a high responsiveness of the pathway to environmental stresses. We then characterized the developmental and WD-induced changes in berry cuticular wax composition, and quantified differences in berry transpiration. Cuticular aliphatic wax content was modulated during development and an increase was observed under WD, with wax esters being strongly up-regulated. These compositional changes were related to up-regulated candidate genes of the aliphatic wax biosynthetic pathway, including CER10, CER2, CER3, CER1, CER4, and WSD1. The effect of WD on berry transpiration was not significant. This study indicates that changes in cuticular wax amount and composition are part of the metabolic response of the grape berry to WD, but these changes do not reduce berry transpiration.

Advances in Biosynthesis, Regulation, and Function of Apple Cuticular Wax

A layer of cuticular wax is deposited on the surface of terrestrial plants, which reduces the damage caused by environmental stress and maintains growth in a relatively stable internal environment. Apple cuticular wax is an important part of the fruit epidermis that plays an essential role in apple development, storage, and adaptation to environmental stress. The formation of cuticular wax has been described at the transcriptional, post-transcriptional, and translational levels in Arabidopsis, whereas less research has been performed on apple cuticular wax. Here, we provide a brief overview of how apple cuticular wax is formed, as well as its structure, composition, and function. An association among the environment, genes, and apple cuticular wax deposition was revealed. Cuticular wax prevents fruit rust from occurring on apple. Taken together, a detailed understanding of apple cuticular wax is discussed. The results will act as a reference for extending the storage period and increasing the commodity value of apple.

Cell type-specific gene expression underpins remodelling of cell wall pectin in exocarp and cortex during apple fruit development

In apple (Malus×domestica) fruit, the different layers of the exocarp (cuticle, epidermis, and hypodermis) protect and maintain fruit integrity, and resist the turgor-driven expansion of the underlying thin-walled cortical cells during growth. Using in situ immunolocalization and size exclusion epitope detection chromatography, distinct cell type differences in cell wall composition in the exocarp were revealed during apple fruit development. Epidermal cell walls lacked pectic (1→4)-β-d-galactan (associated with rigidity), whereas linear (1→5)-α-l-arabinan (associated with flexibility) was exclusively present in the epidermal cell walls in expanding fruit and then appeared in all cell types during ripening. Branched (1→5)-α-l-arabinan was uniformly distributed between cell types. Laser capture microdissection and RNA sequencing (RNA-seq) were used to explore transcriptomic differences controlling cell type-specific wall modification. The RNA-seq data indicate that the control of cell wall composition is achieved through cell-specific gene expression of hydrolases. In epidermal cells, this results in the degradation of galactan side chains by possibly five β-galactosidases (BGAL2, BGAL7, BGAL10, BGAL11, and BGAL103) and debranching of arabinans by α-arabinofuranosidases AF1 and AF2. Together, these results demonstrate that flexibility and rigidity of the different cell layers in apple fruit during development and ripening are determined, at least in part, by the control of cell wall pectin remodelling.

Shelf Life Potential and the Fruit Cuticle: The Unexpected Player

The plant cuticle is an extracellular barrier that protects the aerial, non-lignified parts of plants from the surrounding environment, and furthermore plays important functions in organ growth and development. The role of the cuticle in post-harvest quality of fruits is a topic currently driving a lot of interest since an increasing bulk of research data show its modulating influence on a number of important traits determining shelf life and storage potential, including water transpiration and fruit dehydration, susceptibility to rots, pests and disorders, and even firmness. Moreover, the properties of fruit cuticles keep evolving after harvest, and have also been shown to be highly responsive to the external conditions surrounding the fruit. Indeed, common post-harvest treatments will have an impact on cuticle integrity and performance that needs to be evaluated for a deeper understanding of changes in post-harvest quality. In this review, chemical and biophysical properties of fruit cuticles are summarized. An overview is also provided of post-harvest changes in cuticles and the effects thereupon of some post-harvest procedures, with the purpose of offering a comprehensive summary of currently available information. Identification of natural sources of variability in relevant quality traits would allow breeding for the improvement of post-harvest life of fruit commodities.

Genotypic and heat stress effects on leaf cuticles of field pea using ATR-FTIR spectroscopy

MAIN CONCLUSION

ATR-FTIR spectroscopy in combination with uni- and multivariate analysis was used to quantify the spectral-chemical composition of the leaf cuticle of pea, investigating the effects of variety and heat stress. Field pea (Pisum sativum L.) is sensitive to heat stress and our goal was to improve canopy cooling and flower retention by investigating the protective role of lipid-related compounds in leaf cuticle, and to use results in the future to identify heat resistant genotypes. The objective was to use Attenuated Total Reflection (ATR)-Fourier Transform Infrared (FTIR) spectroscopy, a non-invasive technique, to investigate and quantify changes in adaxial cuticles of fresh leaves of pea varieties that were subjected to heat stress. Eleven varieties were grown under control (24/18 °C day/night) and heat stress conditions (35/18 °C day/night, for 5 days at the early flowering stage). These 11 had significant spectral differences in the integrated area of the main lipid region, CH2 region, CH3 peak, asymmetric and symmetric CH2 peaks, ester carbonyl peak, and the peak area ratio of CH2 to CH3 and ester carbonyl to CH2 asymmetric peak, indicating that cuticles had spectral-chemical diversity of waxes, cutin, and polysaccharides. Results indicated considerable diversity in spectral-chemical makeup of leaf cuticles within commercially available field pea varieties and they responded differently to high growth temperature, revealing their diverse potential to resist heat stress. The ATR-FTIR spectral technique can, therefore, be further used as a medium-throughput approach for rapid screening of superior cultivars for heat tolerance.

Plant cuticle under global change: Biophysical implications

Climatic stressors due to global change induce important modifications to the chemical composition of plant cuticles and their biophysical properties. In particular, plant cuticles can become heavier, stiffer and more inert, improving plant protection.

Mechanical properties of cuticles and their primary determinants

Cuticles envelope primary surfaces of the above-ground portion of plants. They function as barriers to water movement and to gas exchange, and in pathogen defense. To serve as a barrier on growing organs, cuticles must remain intact but at the same time must accommodate ongoing growth. Minimizing cuticle failure has stimulated significant research on the cuticle's mechanical properties. The objective here is to review the literature on the mechanical properties of isolated fruit and leaf cuticles. Cuticles are viscoelastic polymers. Viscoelasticity results mainly from the cutin matrix. Impregnation by waxes, flavonoids, and cutan increases stiffness and strength but decreases extensibility. On the inner side, the cutin matrix is impregnated by cell wall polysaccharides, which are responsible for its elastic behavior. Across species, the maximum forces sustainable by hydrated cuticles in uniaxial tensile tests averaged 0.82 N (range 0.15-1.63 N), the maximum stresses averaged 13.2 MPa (range 2.0-29.0 MPa), the maximum strains averaged 8.8% (range 1.6-28.0%), and the moduli of elasticity averaged 224 MPa (range 60-730 MPa). Among the environmental factors, high temperature and hydration both decreased stiffness. Therefore, the mechanical properties of cuticles in vivo depend largely on the relative proportions of their constituents. These proportions change during development and are also affected by environmental factors such as temperature.

Mismatch between cuticle deposition and area expansion in fruit skins allows potentially catastrophic buildup of elastic strain

The continuous deposition of cutin and wax during leaf and fruit growth is crucial to alleviate elastic strain of the cuticle, minimize the risk of failure and maintain its barrier functions. The cuticular membrane (CM) is a lipoidal biopolymer that covers primary surfaces of terrestrial plants. CMs have barrier functions in water and solute transfer and pathogen invasion. These require intact CMs throughout growth. This is a challenge particularly for fruit, because they increase in area from initiation through to maturity. Our paper investigates the effects of cutin and wax deposition on strain buildup in the CM. We use developing fruits and leaves of apple (Malus × domestica) and sweet cherry (Prunus avium) as models. The hypothesis was that the continuous deposition of the CM prevents the buildup of excessive elastic strain in fruit and leaves. Strains were quantified from decreases in surface area of CMs after isolation from epidermal discs, after wax extraction and from increases in surface area during development. Cuticle mass per unit area increased throughout development in apple fruit, and leaves of apple and sweet cherry. In sweet cherry fruit, however, CM mass increased only initially, but thereafter decreased as the surface expanded rapidly. The release of strain on CM isolation was low in apple fruit and leaves and sweet cherry leaves, but high in sweet cherry fruit. Conversely, strains fixed by the deposition of wax and cutin were high in apple fruit and leaves and sweet cherry leaves, but low in sweet cherry fruit. Our results indicate that in expanding organs, deposition of cutin and wax in the CM allows conversion of elastic to plastic strain. Hence, any lack of such deposition allows buildup of high, potentially catastrophic, elastic strain.

Sugar demand of ripening grape berries leads to recycling of surplus phloem water via the xylem

We tested the common assumption that fleshy fruits become dependent on phloem water supply because xylem inflow declines at the onset of ripening. Using two distinct grape genotypes exposed to drought stress, we found that a sink-driven rise in phloem inflow at the beginning of ripening was sufficient to reverse drought-induced berry shrinkage. Rewatering accelerated berry growth and sugar accumulation concurrently with leaf photosynthetic recovery. Interrupting phloem flow through the peduncle prevented the increase in berry growth after rewatering, but interrupting xylem flow did not. Nevertheless, xylem flow in ripening berries, but not berry size, remained responsive to root or shoot pressurization. A mass balance analysis on ripening berries sampled in the field suggested that phloem water inflow may exceed growth and transpiration water demands. Collecting apoplastic sap from ripening berries showed that osmotic pressure increased at distinct rates in berry vacuoles and apoplast. Our results indicate that the decrease in xylem inflow at the onset of ripening may be a consequence of the sink-driven increase in phloem inflow. We propose a conceptual model in which surplus phloem water bypasses the fruit cells and partly evaporates from the berry surface and partly moves apoplastically to the xylem for outflow.

CHS silencing suggests a negative cross-talk between wax and flavonoid pathways in tomato fruit cuticle

Tomato fruits (Solanum lycopersicum L.) accumulate flavonoids in their cuticle and epidermal cells during ripening. These flavonoids come from de novo biosynthesis due to a significant increase in chalcone synthase (CHS) activity during ripening. Virus-induced gene silencing (VIGS) of tomato fruits have been used to down-regulate SlCHS expression during ripening and analyze the effects at the epidermal and cuticle level. Besides the expected change in fruit color due to a lack of flavonoids incorporated to the cuticle, several other modifications such as a decrease in the amount of cutin and polysaccharides were observed. These indicate a role for either flavonoids or CHS in the alteration of the expression levels of some genes involved in cuticle biosynthesis. Moreover, a negative interaction between the 2 cuticle components, flavonoids and waxes, suggests a relationship between these 2 metabolic pathways.

Transient silencing of CHALCONE SYNTHASE during fruit ripening modifies tomato epidermal cells and cuticle properties

Tomato (Solanum lycopersicum) fruit ripening is accompanied by an increase in CHALCONE SYNTHASE (CHS) activity and flavonoid biosynthesis. Flavonoids accumulate in the cuticle, giving its characteristic orange color that contributes to the eventual red color of the ripe fruit. Using virus-induced gene silencing in fruits, we have down-regulated the expression of SlCHS during ripening and compared the cuticles derived from silenced and nonsilenced regions. Silenced regions showed a pink color due to the lack of flavonoids incorporated to the cuticle. This change in color was accompanied by several other changes in the cuticle and epidermis. The epidermal cells displayed a decreased tangential cell width; a decrease in the amount of cuticle and its main components, cutin and polysaccharides, was also observed. Flavonoids dramatically altered the cuticle biomechanical properties by stiffening the elastic and viscoelastic phase and by reducing the ability of the cuticle to deform. There seemed to be a negative relation between SlCHS expression and wax accumulation during ripening that could be related to the decreased cuticle permeability to water observed in the regions silencing SlCHS. A reduction in the overall number of ester linkages present in the cutin matrix was also dependent on the presence of flavonoids.

Evidence for a radial strain gradient in apple fruit cuticles

The morphological outer side of the apple fruit cuticle is markedly more strained than the inner side. This strain is released upon wax extraction. This paper investigates the effect of ablating outer and inner surfaces of isolated cuticular membranes (CM) of mature apple (Malus × domestica) fruit using cold atmospheric pressure plasma (CAPP) on the release of strain after extraction of waxes. Strain release was quantified as the decrease in area of CM discs following CAPP treatment and subsequent solvent extraction of wax. Increasing duration of CAPP treatment proportionally decreased CM mass per unit area. There was no difference in mass loss rate between CAPP treatments of outer or inner surfaces. Also, there was no difference in surface area of CMs before and after CAPP treatment. However, upon subsequent wax extraction, surface area of CMs decreased indicating the release of strain. Increasing the duration of CAPP treatment resulted in increasing strain release up to 47.7 ± 8.0 % at 20 min when CAPP was applied to the inner surface. In contrast, strain release was independent of CAPP duration averaging about 12.1 ± 0.6 % when applied to the outer surface of the CM. Our results provide evidence for a marked gradient of strain between the outer side (strained) and the inner side of the CM (not strained) of mature apple fruit.

Biomechanical properties of the tomato (Solanum lycopersicum) fruit cuticle during development are modulated by changes in the relative amounts of its components

In this study, growth-dependent changes in the mechanical properties of the tomato (Solanum lycopersicum) cuticle during fruit development were investigated in two cultivars with different patterns of cuticle growth and accumulation. The mechanical properties were determined in uniaxial tensile tests using strips of isolated cuticles. Changes in the functional groups of the cuticle chemical components were analysed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The early stages of fruit growth are characterized by an elastic cuticle, and viscoelastic behaviour only appeared at the beginning of cell enlargement. Changes in the cutin:polysaccharide ratio during development affected the strength required to achieve viscoelastic deformation. The increase in stiffness and decrease in extensibility during ripening, related to flavonoid accumulation, were accompanied by an increase in cutin depolymerization as a result of a reduction in the overall number of ester bonds. Quantitative changes in cuticle components influence the elastic/viscoelastic behaviour of the cuticle. The cutin:polysaccharide ratio modulates the stress required to permanently deform the cuticle and allow cell enlargement. Flavonoids stiffen the elastic phase and reduce permanent viscoelastic deformation. Ripening is accompanied by a chemical cleavage of cutin ester bonds. An infrared (IR) band related to phenolic accumulation can be used to monitor changes in the cutin esterification index.

Biaxial tensile tests identify epidermis and hypodermis as the main structural elements of sweet cherry skin

The skin of developing soft and fleshy fruit is subjected to considerable growth stress, and failure of the skin is associated with impaired barrier properties in water transport and pathogen defence. The objectives were to establish a standardized, biaxial tensile test of the skin of soft and fleshy fruit and to use it to characterize and quantify mechanical properties of the sweet cherry (Prunus avium) fruit skin as a model. A segment of the exocarp (ES) comprising cuticle, epidermis, hypodermis and adhering flesh was mounted in the elastometer such that the in vivo strain was maintained. The ES was pressurized from the inner surface and the pressure and extent of associated bulging were recorded. Pressure : strain responses were almost linear up to the point of fracture, indicating that the modulus of elasticity was nearly constant. Abrading the cuticle decreased the fracture strain but had no effect on the fracture pressure. When pressure was held constant, bulging of the ES continued to increase. Strain relaxation upon releasing the pressure was complete and depended on time. Strains in longitudinal and latitudinal directions on the bulging ES did not differ significantly. Exocarp segments that released their in vivo strain before the test had higher fracture strains and lower moduli of elasticity. The results demonstrate that the cherry skin is isotropic in the tangential plane and exhibits elastic and viscoelastic behaviour. The epidermis and hypodermis, but not the cuticle, represent the structural 'backbone' in a cherry skin. This test is useful in quantifying the mechanical properties of soft and fleshy fruit of a range of species under standardized conditions.

Transcriptional dynamics of the developing sweet cherry (Prunus avium L.) fruit: sequencing, annotation and expression profiling of exocarp-associated genes

The exocarp, or skin, of fleshy fruit is a specialized tissue that protects the fruit, attracts seed dispersing fruit eaters, and has large economical relevance for fruit quality. Development of the exocarp involves regulated activities of many genes. This research analyzed global gene expression in the exocarp of developing sweet cherry (Prunus avium L., 'Regina'), a fruit crop species with little public genomic resources. A catalog of transcript models (contigs) representing expressed genes was constructed from de novo assembled short complementary DNA (cDNA) sequences generated from developing fruit between flowering and maturity at 14 time points. Expression levels in each sample were estimated for 34 695 contigs from numbers of reads mapping to each contig. Contigs were annotated functionally based on BLAST, gene ontology and InterProScan analyses. Coregulated genes were detected using partitional clustering of expression patterns. The results are discussed with emphasis on genes putatively involved in cuticle deposition, cell wall metabolism and sugar transport. The high temporal resolution of the expression patterns presented here reveals finely tuned developmental specialization of individual members of gene families. Moreover, the de novo assembled sweet cherry fruit transcriptome with 7760 full-length protein coding sequences and over 20 000 other, annotated cDNA sequences together with their developmental expression patterns is expected to accelerate molecular research on this important tree fruit crop.

Infrared and Raman spectroscopic features of plant cuticles: a review

The cuticle is one of the most important plant barriers. It is an external and continuous lipid membrane that covers the surface of epidermal cells and whose main function is to prevent the massive loss of water. The spectroscopic characterization of the plant cuticle and its components (cutin, cutan, waxes, polysaccharides and phenolics) by infrared and Raman spectroscopies has provided significant advances in the knowledge of the functional groups present in the cuticular matrix and on their structural role, interaction and macromolecular arrangement. Additionally, these spectroscopies have been used in the study of cuticle interaction with exogenous molecules, degradation, distribution of components within the cuticle matrix, changes during growth and development and characterization of fossil plants.