Gravitropisms and reaction woods of forest trees - evolution, functions and mechanisms

How it all begins: molecular players of the early graviresponse in the non-elongating part of flax stem

Plants have developed two major strategies to adjust their position in response to gravity: differential cell growth on opposing sides of elongating regions and complex processes in non-elongating stem parts, such as the development of reaction wood. Gravistimulation of flax plants induces gravitropic curvature in non-elongating stem parts, largely associated with modifications in phloem and xylem fibers. To gain insight into the key "triggers" and "forward players" that induce negative gravitropic reactions, transcriptome profiling of phloem fibers and xylem tissues from the pulling and opposite stem sides was conducted 1 and 8 h after gravistimulation. The first observed reaction was the activation of processes associated with RNA synthesis and protein folding in both tissues and stem sides, followed by the activation of kinases and transferases. Transcriptomic data revealed rapid and substantial shifts in chloroplast metabolism across all analyzed tissues, including the temporal activation of the branched-chain amino acid pathway, adjustments to light-harvesting complexes, and jasmonic acid biosynthesis. Notably, auxin transporter genes were activated only in the xylem, while other auxin-related genes showed minimal upregulation 1 h after stem inclination in any analyzed sample. Asymmetric changes between stem sides included the sharp activation of ethylene-related genes in the phloem fibers of the opposite stem side, as well as tertiary cell wall deposition in both the phloem and xylem fibers of the pulling stem side during the later stages of the graviresponse. These results provide valuable insights into the mechanisms underlying plant response to gravity.

Branching angles in the modulation of plant architecture: Molecular mechanisms, dynamic regulation, and evolution

Plants develop branches to expand areas for assimilation and reproduction. Branching angles coordinate with branching types, creating diverse plant shapes that are adapted to various environments. Two types of branching angle-the angle between shoots and the angle in relation to gravity or the gravitropic set-point angle (GSA) along shoots-determine the spacing between shoots and the shape of the aboveground plant parts. However, it remains unclear how these branching angles are modulated throughout shoot development and how they interact with other factors that contribute to plant architecture. In this review, we systematically focus on the molecular mechanisms that regulate branching angles across various species, including gravitropism, anti-gravitropic offset, phototropism, and other regulatory factors, which collectively highlight comprehensive mechanisms centered on auxin. We also discuss the dynamics of branching angles during development and their relationships with branching number, stress resistance, and crop yield. Finally, we provide an evolutionary perspective on the conserved role of auxin in the regulation of branching angles.

Gelatinous fibers develop asymmetrically to support bends and coils in common bean vines (Phaseolus vulgaris)

PREMISE

Gelatinous (G)-fibers are specialized fibers that generate tensile force to bend and straighten many plant organs; this phenomenon has been intensively studied in tension wood of trees. Previous work has shown that G-fibers are common within the stems of twining vines, but we lack the spatiotemporal developmental data required to determine whether, or how, G-fibers contribute to the movement and/or stabilization of twining tissues.

METHODS

We employed multiple histochemical approaches to characterize the formation and cell wall architecture of G-fibers in twining and shrub phenotypes of common bean across a developmental time series.

RESULTS

Within an internode, G-fibers first formed asymmetrically via differentiation of pericyclic fibers on the concave side of an existing bend and later arose erratically from the vascular cambium. G-fibers were absent in immature and/or actively circumnutating internodes, thus validating previous reports that G-fibers are not involved in rapid dynamic movements. Instead, G-fibers formed in stationary internodes, where they developed (1) in an alternating asymmetric pattern, likely to support the posture maintenance of erect internodes at the base of twiners and throughout the length of shrubs or (2) on the concave side of twined internodes to stabilize their helical conformation.

CONCLUSIONS

Our spatiotemporal results indicate that common bean vines form G-fibers after an internode has fully elongated and becomes stationary, thus functioning to stabilize the posture of subtle bends and coil internodes. These results contribute to understanding how twining vines establish and maintain a grip on their host or supporting structure.

Drought-Induced Weakening of Temperature Control on Ecosystem Carbon Uptake Across Northern Lands

Rapid warming in northern lands has led to increased ecosystem carbon uptake. It remains unclear, however, whether and how the beneficial effects of warming on carbon uptake will continue with climate change. Moreover, the role played by water stress in temperature control on ecosystem carbon uptake remains highly uncertain. Here, we systematically explored the trend in the temperature control on gross primary production (measured by "SGPP-TAS") across northern lands (> 15°N) using a standardized multiple regression approach by controlling other covarying factors. We estimated SGPP-TAS using three types of GPP datasets: four satellite-derived GPP datasets, FLUXNET tower observed GPP datasets, and GPP outputs from nine CMIP6 models. Our analysis revealed a significant positive-to-negative transition around the year 2000 in the trend of SGPP-TAS. This transition was primarily driven by synchronized changes in soil water content over time and space. The SGPP-TAS trend transition covered about 32% of northern lands, especially in grasslands and coniferous forests where leaf water mediation and structural overshoot accelerated the drought-induced transition, respectively. In the future, widespread negative SGPP-TAS trends are projected in northern lands corresponding with decreasing soil water availability. These findings highlight the shrinking temperature control on northern land carbon uptake in a warmer and drier climate.

A COBRA family protein, PtrCOB3, contributes to gelatinous layer formation of tension wood fibers in poplar

Angiosperm trees usually develop tension wood (TW) in response to gravitational stimulation. TW comprises abundant gelatinous (G-) fibers with thick G-layers primarily composed of crystalline cellulose. Understanding the pivotal factors governing G-layer formation in TW fiber remains elusive. This study elucidates the role of a Populus trichocarpa COBRA family protein, PtrCOB3, in the G-layer formation of TW fibers. PtrCOB3 expression was upregulated, and its promoter activity was enhanced during TW formation. Comparative analysis with wild-type trees revealed that ptrcob3 mutants, mediated by Cas9/gRNA gene editing, were incapable of producing G-layers within TW fibers and showed severely impaired stem lift. Fluorescence immunolabeling data revealed a dearth of crystalline cellulose in the tertiary cell wall (TCW) of ptrcob3 TW fibers. The role of PtrCOB3 in G-layer formation is contingent upon its native promoter, as evidenced by the comparative phenotypic assessments of pCOB11::PtrCOB3, pCOB3::PtrCOB3, and pCOB3::PtrCOB11 transgenic lines in the ptrcob3 background. Overexpression of PtrCOB3 under the control of its native promoter expedited G-layer formation within TW fibers. We further identified 3 transcription factors that bind to the PtrCOB3 promoter and positively regulate its transcriptional levels. Alongside the primary TCW synthesis genes, these findings enable the construction of a 2-layer transcriptional regulatory network for the G-layer formation of TW fibers. Overall, this study uncovers mechanistic insight into TW formation, whereby a specific COB protein executes the deposition of cellulose, and consequently, G-layer formation within TW fibers.

PagKNAT2/6b regulates tension wood formation and gravitropism by targeting cytokinin metabolism

Tension wood is a specialized xylem tissue associated with gravitropism in angiosperm trees. However, few regulators of tension wood formation have been identified. The molecular mechanisms underpinning tension wood formation remain elusive. Here, we report that a Populus KNOTTED-like homeobox gene, PagKNAT2/6b, is involved in tension wood formation and gravity response. Transgenic poplar plants overexpressing PagKNAT2/6b displayed more sensitive gravitropism than controls, as indicated by increased stem curvature. Microscopic examination revealed greater abundance of fibre cells with a gelatinous cell wall layer (G-layer) and asymmetric growth of secondary xylem in PagKNAT2/6b overexpression lines. Conversely, PagKNAT2/6b dominant repression plants exhibited decreased tension wood formation and reduced response to gravity stimulation. Moreover, sensitivity to gravity stimulation showed a negative relationship with development stage. Expression of genes related to growth and senescence was affected in PagKNAT2/6b transgenic plants. More importantly, transcription activation and electrophoretic mobility shift assays suggested that PagKNAT2/6b promotes the expression of cytokinin metabolism genes. Consistently, cytokinin content was increased in PagKNAT2/6b overexpression plants. Therefore, PagKNAT2/6b is involved in gravitropism and tension wood formation, likely via modulation of cytokinin metabolism.

Properties and Functional Analysis of Two Chorismate Mutases from Maritime Pine

Through the shikimate pathway, a massive metabolic flux connects the central carbon metabolism with the synthesis of chorismate, the common precursor of the aromatic amino acids phenylalanine, tyrosine, and tryptophan, as well as other compounds, including salicylate or folate. The alternative metabolic channeling of chorismate involves a key branch-point, finely regulated by aromatic amino acid levels. Chorismate mutase catalyzes the conversion of chorismate to prephenate, a precursor of phenylalanine and tyrosine and thus a vast repertoire of fundamental derived compounds, such as flavonoids or lignin. The regulation of this enzyme has been addressed in several plant species, but no study has included conifers or other gymnosperms, despite the importance of the phenolic metabolism for these plants in processes such as lignification and wood formation. Here, we show that maritime pine (Pinus pinaster Aiton) has two genes that encode for chorismate mutase, PpCM1 and PpCM2. Our investigations reveal that these genes encode plastidial isoenzymes displaying activities enhanced by tryptophan and repressed by phenylalanine and tyrosine. Using phylogenetic studies, we have provided new insights into the possible evolutionary origin of the cytosolic chorismate mutases in angiosperms involved in the synthesis of phenylalanine outside the plastid. Studies based on different platforms of gene expression and co-expression analysis have allowed us to propose that PpCM2 plays a central role in the phenylalanine synthesis pathway associated with lignification.

Flexure wood formation via growth reprogramming in hybrid aspen involves jasmonates and polyamines and transcriptional changes resembling tension wood development

Stem bending in trees induces flexure wood but its properties and development are poorly understood. Here, we investigated the effects of low-intensity multidirectional stem flexing on growth and wood properties of hybrid aspen, and on its transcriptomic and hormonal responses. Glasshouse-grown trees were either kept stationary or subjected to several daily shakes for 5 wk, after which the transcriptomes and hormones were analyzed in the cambial region and developing wood tissues, and the wood properties were analyzed by physical, chemical and microscopy techniques. Shaking increased primary and secondary growth and altered wood differentiation by stimulating gelatinous-fiber formation, reducing secondary wall thickness, changing matrix polysaccharides and increasing cellulose, G- and H-lignin contents, cell wall porosity and saccharification yields. Wood-forming tissues exhibited elevated jasmonate, polyamine, ethylene and brassinosteroids and reduced abscisic acid and gibberellin signaling. Transcriptional responses resembled those during tension wood formation but not opposite wood formation and revealed several thigmomorphogenesis-related genes as well as novel gene networks including FLA and XTH genes encoding plasma membrane-bound proteins. Low-intensity stem flexing stimulates growth and induces wood having improved biorefinery properties through molecular and hormonal pathways similar to thigmomorphogenesis in herbaceous plants and largely overlapping with the tension wood program of hardwoods.

Collective behavior in relation with changing environments: Dynamics, modularity, and agency

Collective behavior operates without central control, using local interactions among participants to adjust to changing conditions. Many natural systems operate collectively, and by specifying what objectives are met by the system, the idea of agency helps to describe how collective behavior is embedded in the conditions it deals with. Ant colonies function collectively, and the enormous diversity of more than 15K species of ants, in different habitats, provides opportunities to look for general ecological patterns in how collective behavior operates. The foraging behavior of harvester ants in the desert regulates activity to manage water loss, while the trail networks of turtle ants in the canopy tropical forest respond to rapidly changing resources and vegetation. These examples illustrate some broad correspondences in natural systems between the dynamics of collective behavior and the dynamics of the surroundings. To outline how interactions among participants, acting in relation with changing surroundings, achieve collective outcomes, I focus on three aspects of collective behavior: the rate at which interactions adjust to conditions, the feedback regime that stimulates and inhibits activity, and the modularity of the network of interactions. To characterize the dynamics of the surroundings, I consider gradients in stability, energy flow, and the distribution of resources and demands. I then propose some hypotheses that link how collective behavior operates with changing environments.

A single amino acid substitution in MdLAZY1A dominantly impairs shoot gravitropism in Malus

Plant architecture is 1 of the most important factors that determines crop yield potential and productivity. In apple (Malus domestica), genetic improvement of tree architecture has been challenging due to a long juvenile phase and growth as complex trees composed of a distinct scion and a rootstock. To better understand the genetic control of apple tree architecture, the dominant weeping growth phenotype was investigated. We report the identification of MdLAZY1A (MD13G1122400) as the genetic determinant underpinning the Weeping (W) locus that largely controls weeping growth in Malus. MdLAZY1A is 1 of the 4 paralogs in apple that are most closely related to AtLAZY1 involved in gravitropism in Arabidopsis (Arabidopsis thaliana). The weeping allele (MdLAZY1A-W) contains a single nucleotide mutation c.584T>C that leads to a leucine to proline (L195P) substitution within a predicted transmembrane domain that colocalizes with Region III, 1 of the 5 conserved regions in LAZY1-like proteins. Subcellular localization revealed that MdLAZY1A localizes to the plasma membrane and nucleus in plant cells. Overexpressing the weeping allele in apple cultivar Royal Gala (RG) with standard growth habit impaired its gravitropic response and altered the growth to weeping-like. Suppressing the standard allele (MdLAZY1A-S) by RNA interference (RNAi) in RG similarly changed the branch growth direction to downward. Overall, the L195P mutation in MdLAZY1A is genetically causal for weeping growth, underscoring not only the crucial roles of residue L195 and Region III in MdLAZY1A-mediated gravitropic response but also a potential DNA base editing target for tree architecture improvement in Malus and other crops.

Seasonal Developing Xylem Transcriptome Analysis of Pinus densiflora Unveils Novel Insights for Compression Wood Formation

Wood is the most important renewable resource not only for numerous practical utilizations but also for mitigating the global climate crisis by sequestering atmospheric carbon dioxide. The compressed wood (CW) of gymnosperms, such as conifers, plays a pivotal role in determining the structure of the tree through the reorientation of stems displaced by environmental forces and is characterized by a high content of lignin. Despite extensive studies on many genes involved in wood formation, the molecular mechanisms underlying seasonal and, particularly, CW formation remain unclear. This study examined the seasonal dynamics of two wood tissue types in Pinus densiflora: CW and opposite wood (OW). RNA sequencing of developing xylem for two consecutive years revealed comprehensive transcriptome changes and unique differences in CW and OW across seasons. During growth periods, such as spring and summer, we identified 2255 transcripts with differential expression in CW, with an upregulation in lignin biosynthesis genes and significant downregulation in stress response genes. Notably, among the laccases critical for monolignol polymerization, PdeLAC17 was found to be specifically expressed in CW, suggesting its vital role in CW formation. PdeERF4, an ERF transcription factor preferentially expressed in CW, seems to regulate PdeLAC17 activity. This research provides an initial insight into the transcriptional regulation of seasonal CW development in P. densiflora, forming a foundation for future studies to enhance our comprehension of wood formation in gymnosperms.

Transcriptomic Evidence Reveals Low Gelatinous Layer Biosynthesis in Neolamarckia cadamba after Gravistimulation

Trees can control their shape and resist gravity by producing tension wood (TW), which is a special wood that results from trees being put under stress. TW is characterized by the presence of a gelatinous layer (G layer) and the differential distribution of cell wall polymers. In this study, we investigated whether or not gravistimulation in N. cadamba resulted in TW with an obvious G layer. The results revealed an absence of an obvious G layer in samples of the upper side of a leaning stem (UW), as well as an accumulation of cellulose and a decrease in lignin content. A negligible change in the content of these polymers was recorded and compared to untreated plant (NW) samples, revealing the presence of a G layer either in much lower concentrations or in a lignified form. A transcriptomic investigation demonstrated a higher expression of cell wall esterase- and hydrolase-related genes in the UW, suggesting an accumulation of noncellulosic sugars in the UW, similar to the spectroscopy results. Furthermore, several G-layer-specific genes were also downregulated, including fasciclin-like arabinogalactan proteins (FLA), beta-galactosidase (BGAL) and chitinase-like proteins (CTL). The gene coexpression network revealed a strong correlation between cell-wall-synthesis-related genes and G-layer-synthesis-specific genes, suggesting their probable antagonistic role during G layer formation. In brief, the G layer in N. cadamba was either synthesized in a very low amount or was lignified during an early stage of growth; further experimental validation is required to understand the exact mechanism and stage of G layer formation in N. cadamba during gravistimulation.

Gravity sensing and responses in the coordination of the shoot gravitropic setpoint angle

Gravity is one of the fundamental environmental cues that affect plant development. Indeed, the plant architecture in the shoots and roots is modulated by gravity. Stems grow vertically upward, whereas lateral organs, such as the lateral branches in shoots, tend to grow at a specific angle according to a gravity vector known as the gravitropic setpoint angle (GSA). During this process, gravity is sensed in specialised gravity-sensing cells named statocytes, which convert gravity information into biochemical signals, leading to asymmetric auxin distribution and driving asymmetric cell division/expansion in the organs to achieve gravitropism. As a hypothetical offset mechanism against gravitropism to determine the GSA, the anti-gravitropic offset (AGO) has been proposed. According to this concept, the GSA is a balance of two antagonistic growth components, that is gravitropism and the AGO. Although the nature of the AGO has not been clarified, studies have suggested that gravitropism and the AGO share a common gravity-sensing mechanism in statocytes. This review discusses the molecular mechanisms underlying gravitropism as well as the hypothetical AGO in the control of the GSA.

A flax mutant with impaired intrusive growth of phloem and xylem fibres demonstrates constitutive gravitropic response

Intrusive growth is a type of growth in which a cell exceeds the growth rate of its neighbours and intrudes between them, reaching a much greater length. This process provides plant fibres with their exceptional length. Fibres are the most abundant cell type in the mechanical tissues of plants. At the same time, the plant fibres are of fundamental importance for the production of textiles, paper, biocomposites, etc. Here we describe a mutant of flax (reduced fibre 1, rdf) in which intrusive growth of fibres is impaired in both phloem and xylem. In addition to the intrinsic differences in fibre length, the mutant is characterized by a constitutive gravitropic response, mechanical aberrations at the macro- and nanolevels, disruption of the cambium and uneven transition of xylem cells to secondary cell wall formation. Gelatinous cell walls in both phloem and xylem of mutant plants have disturbed structure and reduced elasticity. The existence of this mutant-control pair offers both prospects for finding the molecular players involved in triggering intrusive growth, cell wall thickening and for understanding the principles of plant mechanical tissue functioning.

Clonality drives structural patterns and shapes the community assemblage of the Mediterranean Fagus sylvatica subalpine belt

Past anthropogenic disturbances lowered the altitudinal distribution of the Mediterranean Fagus sylvatica forests below 2,000 m a.s.l. Accordingly, our current understanding of the southern distribution range of F. sylvatica forests is restricted to managed stands below this elevation, neglecting relic forests growing above. This study has shed light on the structure and species assemblage of an unmanaged relict subalpine F. sylvatica stand growing within the core of its southernmost glacial refugia and at its highest species range elevation limit (2,140 m a.s.l.) in southern Apennines (Italy). Here, tree biometric attributes and understory species abundances were assessed in eight permanent plots systematically positioned from 1,650 to 2,130 m a.s.l. In the subalpine belt, F. sylvatica had formed a dense clonal stem population that was layered downward on the steepest slopes. The density and spatial aggregation of the stems were increased, while their stature and crown size were decreased. Above 2,000 m, changes in tree growth patterns, from upright single-stemmed to procumbent multi-stemmed, and canopy layer architecture, with crowns packed and closer to the floor, were allowed for the persistence of understory herbaceous species of biogeographic interest. Clonal layering represents an adaptive regeneration strategy for the subalpine belt environmental constraints not previously recognized in managed Mediterranean F. sylvatica forests. The clonal structure and unique species assemblage of this relic forest highlight the value of its inclusion in the priority areas networks, representing a long-term management strategy of emblematic glacial and microclimatic refugia.

WAKL8 Regulates Arabidopsis Stem Secondary Wall Development

Wall-associated kinases/kinase-likes (WAKs/WAKLs) are plant cell surface sensors. A variety of studies have revealed the important functions of WAKs/WAKLs in regulating cell expansion and defense in cells with primary cell walls. Less is known about their roles during the development of the secondary cell walls (SCWs) that are present in xylem vessel (XV) and interfascicular fiber (IF) cells. In this study, we used RNA-seq data to screen Arabidopsis thaliana WAKs/WAKLs members that may be involved in SCW development and identified WAKL8 as a candidate. We obtained T-DNA insertion mutants wakl8-1 (inserted at the promoter region) and wakl8-2 (inserted at the first exon) and compared the phenotypes to wild-type (WT) plants. Decreased WAKL8 transcript levels in stems were found in the wakl8-2 mutant plants, and the phenotypes observed included reduced stem length and thinner walls in XV and IFs compared with those in the WT plants. Cell wall analysis showed no significant changes in the crystalline cellulose or lignin content in mutant stems compared with those in the WT. We found that WAKL8 had alternative spliced versions predicted to have only extracellular regions, which may interfere with the function of the full-length version of WAKL8. Our results suggest WAKL8 can regulate SCW thickening in Arabidopsis stems.

A combination of scanning electron microscopy and broad argon ion beam milling provides intact structure of secondary tissues in woody plants

The secondary tissues of woody plants consist of fragile cells and rigid cell walls. However, the structures are easily damaged during mechanical cross-sectioning for electron microscopy analysis. Broad argon ion beam (BIB) milling is commonly employed for scanning electron microscopy (SEM) of hard materials to generate a large and distortion-free cross-section. However, BIB milling has rarely been used in plant science. In the present study, SEM combined with BIB milling was validated as an accurate tool for structural observation of secondary woody tissues of two samples, living pine (Pinus densiflora) and high-density oak wood (Quercus phillyraeoides), and compared with classical microtome cross-sectioning. The BIB milling method does not require epoxy resin embedding because of prior chemical fixation and critical point drying of the sample, thus producing a three-dimensional image. The results showed that xylem structures were well-preserved in their natural state in the BIB-milled cross-section compared with the microtome cross-section. The observations using SEM combined with BIB milling were useful for wide-area imaging of both hard and soft plant tissues, which are difficult to observe with transmitted electron microscopy because it is difficult to obtain sections of such tissues, particularly those of fragile reaction woods.

Bouncing back stronger: Diversity, structure, and molecular regulation of gelatinous fiber development

Gelatinous fibers (G-fibers) are specialized contractile cells found in a diversity of vascular plant tissues, where they provide mechanical support and/or facilitate plant mobility. G-fibers are distinct from typical fibers by the presence of an innermost thickened G-layer, comprised mainly of axially oriented cellulose microfibrils. Despite the disparate developmental origins-tension wood fibers from the vascular cambium or primary phloem fibers from the procambium-G-fiber development, composition, and molecular signatures are remarkably similar; however, important distinctions do exist. Here, we synthesize current knowledge of the phylogenetic diversity, compositional makeup, and the molecular profiles that characterize G-fiber development and highlight open questions for future investigation.

Differential Expression of Arabinogalactan in Response to Inclination in Stem of Pinus radiata Seedlings

Arabinogalactan proteins (AGPs) are members of a family of proteins that play important roles in cell wall dynamics. AGPs from inclined pines were determined using JIM7, LM2, and LM6 antibodies, showing a higher concentration in one side of the stem. The accumulation of AGPs in xylem and cell wall tissues is enhanced in response to loss of tree stem verticality. The differential gene expression of AGPs indicates that these proteins could be involved in the early response to inclination and also trigger signals such as lignin accumulation, as well as thicken cell wall and lamella media to restore stem vertical growth. A subfamily member of AGPs, which is Fasciclin-like has been described in angiosperm species as inducing tension wood and in some gymnosperms. A search for gene sequences of this subfamily was performed on an RNA-seq library, where 12 sequences were identified containing one or two fasciclin I domains (FAS), named PrFLA1 to PrFLA12. Four of these sequences were phylogenetically classified in group A, where PrFLA1 and PrFLA4 are differentially expressed in tilted pine trees.

FLA11 and FLA12 glycoproteins fine-tune stem secondary wall properties in response to mechanical stresses

Secondary cell walls (SCWs) in stem xylem vessel and fibre cells enable plants to withstand the enormous compressive forces associated with upright growth. It remains unclear if xylem vessel and fibre cells can directly sense mechanical stimuli and modify their SCW during development. We provide evidence that Arabidopsis SCW-specific Fasciclin-Like Arabinogalactan-proteins 11 (FLA11) and 12 (FLA12) are possible cell surface sensors regulating SCW development in response to mechanical stimuli. Plants overexpressing FLA11 (OE-FLA11) showed earlier SCW development compared to the wild-type (WT) and altered SCW properties that phenocopy WT plants under compression stress. By contrast, OE-FLA12 stems showed higher cellulose content compared to WT plants, similar to plants experiencing tensile stress. fla11, OE-FLA11, fla12, and OE-FLA12 plants showed altered SCW responses to mechanical stress compared to the WT. Quantitative polymerase chain reaction (qPCR) and RNA-seq analysis revealed the up-regulation of genes and pathways involved in stress responses and SCW synthesis and regulation. Analysis of OE-FLA11 nst1 nst3 plants suggests that FLA11 regulation of SCWs is reliant on classical transcriptional networks. Our data support the involvement of FLA11 and FLA12 in SCW sensing complexes to fine-tune both the initiation of SCW development and the balance of lignin and cellulose synthesis/deposition in SCWs during development and in response to mechanical stimuli.

A PtrLBD39-mediated transcriptional network regulates tension wood formation in Populus trichocarpa

Tension wood (TW) is a specialized xylem tissue formed in angiosperm trees under gravitational stimulus or mechanical stresses (e.g., bending). The genetic regulation that underlies this important mechanism remains poorly understood. Here, we used laser capture microdissection of stem xylem cells coupled with full transcriptome RNA-sequencing to analyze TW formation in Populus trichocarpa. After tree bending, PtrLBD39 was the most significantly induced transcription factor gene; it has a phylogenetically paired homolog, PtrLBD22. CRISPR-based knockout of PtrLBD39/22 severely inhibited TW formation, reducing cellulose and increasing lignin content. Transcriptomic analyses of CRISPR-based PtrLBD39/22 double mutants showed that these two genes regulate a set of TW-related genes. Chromatin immunoprecipitation sequencing (ChIP-seq) was used to identify direct targets of PtrLBD39. We integrated transcriptomic analyses and ChIP-seq assays to construct a transcriptional regulatory network (TRN) mediated by PtrLBD39. In this TRN, PtrLBD39 directly regulates 26 novel TW-responsive transcription factor genes. Our work suggests that PtrLBD39 and PtrLBD22 specifically control TW formation by mediating a TW-specific TRN in Populus.

Do woody vines use gelatinous fibers to climb?

Many plant movements are facilitated by contractile cells called gelatinous fibers (G-fibers), but how G-fibers function in the climbing movements of woody vines remains underexplored. In this Insight, we compare the presence and distribution of G-fibers in the stems of stem-twiners, which wrap around supports, with non-stem-twiners, which attach to supports via tendrils or adventitious roots. An examination of 164 species spanning the vascular plant phylogeny reveals that G-fibers are common in stem-twiners but scarce in non-stem-twiners, suggesting that G-fibers are preferentially formed in the organ responsible for movement. When present, G-fibers are in the xylem, phloem, pericycle, and/or cortex. We discuss the hypothesis that G-fibers are foundational to plant movement and highlight research opportunities concerning G-fiber development and function.

The Inducible Accumulation of Cell Wall-Bound p-Hydroxybenzoates Is Involved in the Regulation of Gravitropic Response of Poplar

Lignin in Populus species is acylated with p-hydroxybenzoate. Monolignol p-hydroxybenzoyltransferase 1 (PHBMT1) mediates p-hydroxybenzoylation of sinapyl alcohol, eventually leading to the modification of syringyl lignin subunits. Angiosperm trees upon gravistimulation undergo the re-orientation of their growth along with the production of specialized secondary xylem, i.e., tension wood (TW), that generates tensile force to pull the inclined stem or leaning branch upward. Sporadic evidence suggests that angiosperm TW contains relatively a high percentage of syringyl lignin and lignin-bound p-hydroxybenzoate. However, whether such lignin modification plays a role in gravitropic response remains unclear. By imposing mechanical bending and/or gravitropic stimuli to the hybrid aspens in the wild type (WT), lignin p-hydroxybenzoate deficient, and p-hydroxybenzoate overproduction plants, we examined the responses of plants to gravitropic/mechanical stress and their cell wall composition changes. We revealed that mechanical bending or gravitropic stimulation not only induced the overproduction of crystalline cellulose fibers and increased the relative abundance of syringyl lignin, but also significantly induced the expression of PHBMT1 and the increased accumulation of p-hydroxybenzoates in TW. Furthermore, we found that although disturbing lignin-bound p-hydroxybenzoate accumulation in the PHBMT1 knockout and overexpression (OE) poplars did not affect the major chemical composition shifts of the cell walls in their TW as occurred in the WT plants, depletion of p-hydroxybenzoates intensified the gravitropic curving of the plantlets in response to gravistimulation, evident with the enhanced stem secant bending angle. By contrast, hyperaccumulation of p-hydroxybenzoates mitigated gravitropic response. These data suggest that PHBMT1-mediated lignin modification is involved in the regulation of poplar gravitropic response and, likely by compromising gravitropism and/or enhancing autotropism, negatively coordinates the action of TW cellulose fibers to control the poplar wood deformation and plant growth.

Functional understanding of secondary cell wall cellulose synthases in Populus trichocarpa via the Cas9/gRNA-induced gene knockouts

Plant cellulose is synthesized by a large plasma membrane-localized cellulose synthase (CesA) complex. However, an overall functional determination of secondary cell wall (SCW) CesAs is still lacking in trees, especially one based on gene knockouts. Here, the Cas9/gRNA-induced knockouts of PtrCesA4, 7A, 7B, 8A and 8B genes were produced in Populus trichocarpa. Based on anatomical, immunohistochemical and wood composition evidence, we gained a comprehensive understanding of five SCW PtrCesAs at the genetic level. Complete loss of PtrCesA4, 7A/B or 8A/B led to similar morphological abnormalities, indicating similar and nonredundant genetic functions. The absence of the gelatinous (G) layer, one-layer-walled fibres and a 90% decrease in cellulose in these mutant woods revealed that the three classes of SCW PtrCesAs are essential for multilayered SCW structure and wood G-fibre. In addition, the mutant primary and secondary phloem fibres lost the n(G + L)- and G-layers and retained the thicker S-layers (L, lignified; S, secondary). Together with polysaccharide immunolocalization data, these findings suggest differences in the role of SCW PtrCesAs-synthesized cellulose in wood and phloem fibre wall structures. Overall, this functional understanding of the SCW PtrCesAs provides further insights into the impact of lacking cellulose biosynthesis on growth, SCW, wood G-fibre and phloem fibre wall structures in the tree.

Drought elicits contrasting responses on the autumn dynamics of wood formation in late successional deciduous tree species

Research on wood phenology has mainly focused on reactivation of the cambium in spring. In this study we investigated if summer drought advances cessation of wood formation and if it has any influence on wood structure in late successional forest trees of the temperate zone. The end of xylogenesis was monitored between August and November in stands of European beech and pedunculate oak in Belgium for two consecutive years, 2017 and 2018, with the latter year having experienced an exceptional summer drought. Wood formation in oak was affected by the drought, with oak trees ceasing cambial activity and wood maturation about 3 weeks earlier in 2018 compared with 2017. Beech ceased wood formation before oak, but its wood phenology did not differ between years. Furthermore, between the 2 years, no significant difference was found in ring width, percentage of mature fibers in the late season, vessel size and density. In 2018, beech did show thinner fiber walls, whereas oak showed thicker walls. In this paper, we showed that summer drought can have an important impact on late season wood phenology xylem development. This will help to better understand forest ecosystems and improve forest models.

Localised laccase activity modulates distribution of lignin polymers in gymnosperm compression wood

The woody stems of coniferous gymnosperms produce specialised compression wood to adjust the stem growth orientation in response to gravitropic stimulation. During this process, tracheids develop a compression-wood-specific S₂ L cell wall layer with lignins highly enriched with p-hydroxyphenyl (H)-type units derived from H-type monolignol, whereas lignins produced in the cell walls of normal wood tracheids are exclusively composed of guaiacyl (G)-type units from G-type monolignol with a trace amount of H-type units. We show that laccases, a class of lignin polymerisation enzymes, play a crucial role in the spatially organised polymerisation of H-type and G-type monolignols during compression wood formation in Japanese cypress (Chamaecyparis obtusa). We performed a series of chemical-probe-aided imaging analysis on C. obtusa compression wood cell walls, together with gene expression, protein localisation and enzymatic assays of C. obtusa laccases. Our data indicated that CoLac1 and CoLac3 with differential oxidation activities towards H-type and G-type monolignols were precisely localised to distinct cell wall layers in which H-type and G-type lignin units were preferentially produced during the development of compression wood tracheids. We propose that, not only the spatial localisation of laccases, but also their biochemical characteristics dictate the spatial patterning of lignin polymerisation in gymnosperm compression wood.

Gravitational Influence on Human Living Systems and the Evolution of Species on Earth

Gravity constituted the only constant environmental parameter, during the evolutionary period of living matter on Earth. However, whether gravity has affected the evolution of species, and its impact is still ongoing. The topic has not been investigated in depth, as this would require frequent and long-term experimentations in space or an environment of altered gravity. In addition, each organism should be studied throughout numerous generations to determine the profound biological changes in evolution. Here, we review the significant abnormalities presented in the cardiovascular, immune, vestibular and musculoskeletal systems, due to altered gravity conditions. We also review the impact that gravity played in the anatomy of snakes and amphibians, during their evolution. Overall, it appears that gravity does not only curve the space-time continuum but the biological continuum, as well.

Cell Wall Layer Induced in Xylem Fibers of Flax Upon Gravistimulation Is Similar to Constitutively Formed Cell Walls of Bast Fibers

In the fibers of many plant species after the formation of secondary cell walls, cellulose-enriched cell wall layers (often named G-layers or tertiary cell walls) are deposited which are important in many physiological situations. Flax (Linum usitatissimum L.) phloem fibers constitutively develop tertiary cell walls during normal plant growth. During the gravitropic response after plant inclination, the deposition of a cellulose-enriched cell wall layer is induced in xylem fibers on one side of the stem, providing a system similar to that of tension wood in angiosperm trees. Atomic force microscopy (AFM), immunochemistry, and transcriptomic analyses demonstrated that the G-layer induced in flax xylem fibers was similar to the constitutively formed tertiary cell wall of bast (phloem) fibers but different from the secondary cell wall. The tertiary cell walls, independent of tissue of origin and inducibility, were twice as stiff as the secondary cell walls. In the gravitropic response, the tertiary cell wall deposition rate in xylem was higher than that of the secondary cell wall. Rhamnogalacturonan I (RG-I) with galactan side chains was a prominent component in cellulose-rich layers of both phloem and xylem flax fibers. Transcriptomic events underlying G-layer deposition in phloem and xylem fibers had much in common. At the induction of tertiary cell wall deposition, several genes for rhamnosyltransferases of the GT106 family were activated in xylem samples. The same genes were expressed in the isolated phloem fibers depositing the tertiary cell wall. The comparison of transcriptomes in fibers with both inducible and constitutive tertiary cell wall deposition and xylem tissues that formed the secondary cell walls is an effective system that revealed important molecular players involved in the formation of cellulose-enriched cell walls.

Early transcriptional response to gravistimulation in poplar without phototropic confounding factors

In response to gravistimulation under anisotropic light, tree stems showing an active cambium produce reaction wood that redirects the axis of the trees. Several studies have described transcriptomic or proteomic models of reaction wood relative to the opposite wood. However, the mechanisms leading to the formation of reaction wood are difficult to decipher because so many environmental factors can induce various signalling pathways leading to this developmental reprogramming. Using an innovative isotropic device where the phototropic response does not interfere with gravistimulation we characterized the early molecular responses occurring in the stem of poplar after gravistimulation in an isotropic environment, and without deformation of the stem. After 30 min tilting at 35° under anisotropic light, we collected the upper and lower xylems from the inclined stems. Controls were collected from vertical stems. We used a microarray approach to identify differentially expressed transcripts. High-throughput real-time PCR allowed a kinetic experiment at 0, 30, 120 and 180 min after tilting at 35°, with candidate genes. We identified 668 differentially expressed transcripts, from which we selected 153 candidates for additional Fluidigm qPCR assessment. Five candidate co-expression gene clusters have been identified after the kinetic monitoring of the expression of candidate genes. Gene ontology analyses indicate that molecular reprogramming of processes such as 'wood cell expansion', 'cell wall reorganization' and 'programmed cell death' occur as early as 30 min after gravistimulation. Of note is that the change in the expression of different genes involves a fine regulation of gibberellin and brassinosteroid pathways as well as flavonoid and phosphoinositide pathways. Our experimental set-up allowed the identification of genes regulated in early gravitropic response without the bias introduced by phototropic and stem bending responses.

Comparative studies on lignin structures in normal and tension wood of Populus × euramericana cv. "74/76"

Tension wood is a type of defect of wood, however, it has some especial character and structure. In this study, cellulase lignin structures in normal and tension wood of Poplar 107 (Populus × euramericana cv. '74/76') were compared using ultraviolet (UV), Fourier transform infrared (FT-IR), Raman and magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC) and elemental analysis. The results showed that the lignins in both normal and tension wood were dominated by syringyl units, followed by guaiacyl and p-hydroxyphenyl units. The FT-IR result presented that the relative intensity of syringyl units in normal and tension wood were 0.87 and 0.90. The contents of aliphatic hydroxyl, methoxyl, condensed phenolic hydroxyl and carboxyl of lignin in tension wood were higher than those of phenolic hydroxyl groups and β-5. The contents of β-O-4, β-β and β-1 in tension wood were similar with those in normal wood. The average per-C₉-unit formulae of the lignin in normal and tension wood of Poplar 107 were C₉H_7.21O_1.79 (OH)_{1.17_x0001_}(OCH₃)_1.55 and C₉H_7.23O_1.76(OH)_{1.25_x0001_}(OCH₃)_1.62, respectively.

Mechanical measurement of gravitropic bending force in pea sprouts

Environmental stimuli such as gravity and light modify the plant development to optimize overall architecture. Many physiological and molecular biological studies of gravitropism and phototropism have been carried out. However, sufficient analysis has not been performed from a mechanical point of view. If the biological and mechanical characteristics of gravitropism and phototropism can be accurately grasped, then controlling the environmental conditions would be helpful to control the growth of plants into a specific shape. In this study, to clarify the mechanical characteristics of gravitropism, we examined the transverse bending moment occurring in cantilevered pea (Pisum sativum) sprouts in response to gravistimulation. The force of the pea sprouts lifting themselves during gravitropism was measured using an electronic balance. The gravitropic bending force of the pea sprouts was in the order of 10⁰ Nmm in the conditions set for this study, although there were wide variations due to individual differences.

Evolutionary network genomics of wood formation in a phylogenetic survey of angiosperm forest trees

Wood formation was present in early angiosperms, but has been highly modified through evolution to generate the anatomical diversity seen in extant angiosperm lineages. In this project, we modeled changes in gene coexpression relationships associated with the evolution of wood formation in a phylogenetic survey of 13 angiosperm tree species. Gravitropic stimulation was used as an experimental treatment to alter wood formation and also perturb gene expression. Gene transcript abundances were determined using RNA sequencing of developing wood tissues from upright trees, and from the top (tension wood) and bottom (opposite wood) tissues of gravistimulated trees. A network-based approach was employed to align gene coexpression networks across species based on orthologous relationships. A large-scale, multilayer network was modeled that identified both lineage-specific gene coexpression modules and modules conserved across multiple species. Functional annotation and analysis of modules identified specific regulatory processes associated with conserved modules, including regulation of hormones, protein phosphorylation, meristem development and epigenetic processes. Our results provide novel insights into the evolution and development of wood formation, and demonstrate the ability to identify biological processes and genes important for the evolution of a foundational trait in nonmodel, undomesticated forest trees.

Modification of Fire Regimes Inferred from the Age Structure of Two Conifer Species in a Tropical Montane Forest, Mexico

Research Highlights: Age structure was used to infer fire regimes in the Monarch Butterfly Biosphere Reserve. Uneven-aged structures in stands dominated and co-dominated by pine and fir species, which are distributed according to an altitudinal gradient, indicated a regime of frequent, low-severity, and low-intensity fires. Background and Objectives: Age structure analyses have been used to infer natural and disrupted fire regimes when field-based descriptions of fires are scarce or unavailable. In montane conifer forests, fire regimes typically vary according to an altitudinal gradient, shaping contrasting tree establishment patterns. In the Monarch Butterfly Biosphere Reserve, Mexico, the altitudinal distribution and fire regimes of sacred fir forests (Abies religiosa), smooth-bark Mexican pine forests (Pinus pseudostrobus), and mixed-conifer forests are poorly documented. The objectives of this study were to determine the altitudinal ranges occupied by mono-dominant and co-dominant stands and to reconstruct tree establishment history to infer historical fire regimes. Materials and Methods: Six altitudinal transects were established along the reserve, each one at elevations from 2400 to 3300 m, with sampling sites at every 150 m of elevation. In each site, increment cores were collected from the base of 25 mature trees. A total of 800 increment cores were collected and cross-dated. Results: P. pseudostrobus is dominant in stands between 2400 and 2850 m, A. religiosa between 3150 and 3300 m, and both species co-dominate between 2850 and 3150 m. The establishment pattern for both species has been continuous, represented by uneven-aged structures, suggesting that tree establishment in smooth-bark Mexican pine forests, mixed-conifer forests, and sacred fir forests, is likely to be associated with frequent, low-severity, and low-intensity fires. Conclusions: These fire regimes suggest, by the one hand, the disruption of natural fire regimes by human activities, limiting the occurrence of high-severity fires; on the other hand, a distinctive feature of these tropical montane forests.

Transcriptional analysis of arogenate dehydratase genes identifies a link between phenylalanine biosynthesis and lignin biosynthesis

Biogenesis of the secondary cell wall in trees involves the massive biosynthesis of the phenylalanine-derived polymer lignin. Arogenate dehydratase (ADT) catalyzes the last, and rate-limiting, step of the main pathway for phenylalanine biosynthesis. In this study, we found that transcript levels for several members of the large ADT gene family, including ADT-A and ADT-D, were enhanced in compression wood of maritime pine, a xylem tissue enriched in lignin. Transcriptomic analysis of maritime pine silenced for PpMYB8 revealed that this gene plays a critical role in coordinating the deposition of lignin with the biosynthesis of phenylalanine. Specifically, it was found that ADT-A and ADT-D were strongly down-regulated in PpMYB8-silenced plants and that they were transcriptionally regulated through direct interaction of this transcription factor with regulatory elements present in their promoters. Another transcription factor, PpHY5, exhibited an expression profile opposite to that of PpMYB8 and also interacted with specific regulatory elements of ADT-A and ADT-D genes, suggesting that it is involved in transcriptional regulation of phenylalanine biosynthesis. Taken together, our results reveal that PpMYB8 and PpHY5 are involved in the control of phenylalanine formation and its metabolic channeling for lignin biosynthesis and deposition during wood formation in maritime pine.

Stem length, not climate, controls vessel diameter in two trees species across a sharp precipitation gradient

Variation in xylem conduit diameter traditionally has been explained by climate, whereas other evidence suggests that tree height is the main driver of conduit diameter. The effect of climate versus stem length on vessel diameter was tested in two tree species (Embothrium coccineum, Nothofagus antarctica) that both span an exceptionally wide precipitation gradient (2300-500 mm). To see whether, when taking stem length into account, plants in wetter areas had wider vessels, not only the scaling of vessel diameter at the stem base across individuals of different heights, but also the tip-to-base scaling along individuals of similar heights across sites were examined. Within each species, plants of similar heights had similar mean vessel diameters and similar tip-to-base widening of vessel diameter, regardless of climate, with the slopes and intercepts of the vessel diameter-stem length relationship remaining invariant within species across climates. This study focusing on within-species variation--thus, avoiding noise associated with the great morphological variation across species--showed unequivocally that plant size, not climate, is the main driver of variation in vessel diameter. Therefore, to the extent that climate selects for differing vessel diameters, it will inevitably also affect plant height.

Formation of Annual Ring Eccentricity in Coarse Roots within the Root Cage of Pinus ponderosa Growing on Slopes

The coarse roots of Pinus ponderosa included in the cage are the ones most involved in tree stability. This study explored the variations in traits, such as volume, cross-sectional area, and radius length of cage roots, and used those data to develop a mathematical model to better understand the type of forces occurring for each shallow lateral root segment belonging to different quadrants of the three-dimensional (3D) root system architecture. The pattern and intensity of these forces were modelled along the root segment from the branching point to the cage edge. Data of root cage volume in the upper 30 cm of soil showed a higher value in the downslope and windward quadrant while, at a deeper soil depth (>30 cm), we found higher values in both upslope and leeward quadrants. The analysis of radius length and the cross-sectional area of the shallow lateral roots revealed the presence of a considerable degree of eccentricity of the annual rings at the branching point and at the cage edge. This eccentricity is due to the formation of compression wood, and the eccentricity changes from the top portion at the branching point to the bottom portion at the cage edge, which we hypothesize may be a response to the variation in mechanical forces occurring in the various zones of the cage. This hypothesis is supported by a mathematical model that shows how the pattern and intensity of different types of mechanical forces are present within the various quadrants of the same root system from the taproot to the cage edge.

Brassinosteroid regulation of wood formation in poplar

Brassinosteroids have been implicated in the differentiation of vascular cell types in herbaceous plants, but their roles during secondary growth and wood formation are not well defined. Here we pharmacologically and genetically manipulated brassinosteroid levels in poplar trees and assayed the effects on secondary growth and wood formation, and on gene expression within stems. Elevated brassinosteroid levels resulted in increases in secondary growth and tension wood formation, while inhibition of brassinosteroid synthesis resulted in decreased growth and secondary vascular differentiation. Analysis of gene expression showed that brassinosteroid action is positively associated with genes involved in cell differentiation and cell-wall biosynthesis. The results presented here show that brassinosteroids play a foundational role in the regulation of secondary growth and wood formation, in part through the regulation of cell differentiation and secondary cell wall biosynthesis.

The Cytoskeleton and Its Role in Determining Cellulose Microfibril Angle in Secondary Cell Walls of Woody Tree Species

Recent advances in our understanding of the molecular control of secondary cell wall (SCW) formation have shed light on molecular mechanisms that underpin domestication traits related to wood formation. One such trait is the cellulose microfibril angle (MFA), an important wood quality determinant that varies along tree developmental phases and in response to gravitational stimulus. The cytoskeleton, mainly composed of microtubules and actin filaments, collectively contribute to plant growth and development by participating in several cellular processes, including cellulose deposition. Studies in Arabidopsis have significantly aided our understanding of the roles of microtubules in xylem cell development during which correct SCW deposition and patterning are essential to provide structural support and allow for water transport. In contrast, studies relating to SCW formation in xylary elements performed in woody trees remain elusive. In combination, the data reviewed here suggest that the cytoskeleton plays important roles in determining the exact sites of cellulose deposition, overall SCW patterning and more specifically, the alignment and orientation of cellulose microfibrils. By relating the reviewed evidence to the process of wood formation, we present a model of microtubule participation in determining MFA in woody trees forming reaction wood (RW).

Immunolocalization of β-(1-4)-D-galactan, xyloglucans and xylans in the reaction xylem fibres of Leucaena leucocephala (Lam.) de Wit

Cell wall architecture of tension wood fibres represents a suitable biological system to study the mechanism of growth and maintenance of posture of trees growing under various physical and physiological growth constraints. In the present study, we investigated the spatial distributions of β-(1-4)-D-galactan, xyloglucan and xylans (both less and highly substituted) in the opposite and tension wood fibres of bent Leucaena leucocephala by immunolabelling with monoclonal antibodies LM5, CCRCM1, LM10 and LM11 specific to these carbohydrate epitopes. The presence of non-lignified, tertiary wall layer is the typical tension wood characteristic associated with the reaction xylem fibres in Leucaena. LM5 labelling of opposite fibres showed weak labelling in the cell walls indicating less concentration of β-(1-4)-D-galactans while tension wood showed strong labelling in the tertiary wall layer suggesting the gelatinous layer (G-layer) has a strong cross linking with β-(1-4)-D-galactans. Xyloglucan distribution was more in the compound middle lamellae and the primary wall-S1 layer boundary of tension wood fibres as compared to that of opposite wood. A weak labelling was also evident near the boundary between the G-layer and the secondary wall of tension wood fibres. The secondary wall of opposite and tension wood fibres showed a strong distribution of both ls ACG Xs (LM10) and hs ACG Xs (LM11) while a weak labelling was noticed in the compound middle lamella. Tension wood fibres also showed strong xylan labelling mainly confined to the lignified secondary walls while the G-layer showed weak xylan labelling. In conclusion, our results suggest that β-(1-4)-D-galactans and xyloglucans could be implicated in the tensile stress generation within the G-layer of tension wood fibres of Leucaena leucocephala.

Posture control in land plants: growth, position sensing, proprioception, balance, and elasticity

The colonization of the atmosphere by land plants was a major evolutionary step. The mechanisms that allow for vertical growth through air and the establishment and control of a stable erect habit are just starting to be understood. A key mechanism was found to be continuous posture control to counterbalance the mechanical and developmental challenges of maintaining a growing upright structure. An interdisciplinary systems biology approach was invaluable in understanding the underlying principles and in designing pertinent experiments. Since this discovery previously held views of gravitropic perception had to be reexamined and this has led to the description of proprioception in plants. In this review, we take a purposefully pedagogical approach to present the dynamics involved from the cellular to whole-plant level. We show how the textbook model of how plants sense gravitational force has been replaced by a model of position sensing, a clinometer mechanism that involves both passive avalanches and active motion of statoliths, granular starch-filled plastids, in statocytes. Moreover, there is a transmission of information between statocytes and other specialized cells that sense the degree of organ curvature and reset asymmetric growth to straighten and realign the structure. We give an overview of how plants have used the interplay of active posture control and elastic sagging to generate a whole range of spatial displays during their life cycles. Finally, a position-integrating mechanism has been discovered that prevents directional plant growth from being disrupted by wind-induced oscillations.

Electrical resistivity tomography: patterns in Betula pendula, Fagus sylvatica, Picea abies and Pinus sylvestris

Electrical resistivity (ER) tomography is a promising technique to minimally invasively study stems of living trees. It allows insights into xylem properties based on the cross-sectional distribution of ER that is governed by the wood's electrical conductance. In this study, ER measurements were carried out on four forest tree species, Betula pendula, Fagus sylvatica, Picea abies and Pinus sylvestris, to demonstrate interspecific, intraspecific and within-tree variation of ER tomograms. Further, ER patterns were linked to xylem moisture content (MC), electrolyte content and density obtained from wood core analyses. The ER patterns of both coniferous species, P. abies and P. sylvestris, were found to be more homogenous and concentric compared with the complex tomograms of angiosperms. However, the ER range of coniferous trees showed considerable intraspecific variation. Measurements near ground level showed pronounced effects on ER tomograms, highlighting the importance of the chosen measurement height. A strong relation between ER and wood density was found in F. sylvatica while ER patterns of conifers were mainly influenced by MC. Results demonstrate a high species specificity of ER tomograms and of respective influencing xylem traits. They underline the importance of reference measurements for a correct interpretation of ER studies.

Disentangling the effects of disturbance, climate and tree age on xylem hydraulic conductivity of Betula pendula

BACKGROUND AND AIMS

The increasing frequency of disturbances in temperate forests is responsible for the greater numbers of trees with mechanically damaged cambial zones. Adjustment of wood anatomical structure to balance between safe and efficient water conductivity is one mechanism trees employ to cope with mechanical damage. The relative role of disturbances, tree age and climate in shaping xylem conduits and affecting xylem hydraulic conductivity remains unknown.

METHODS

We performed an experiment with five different mechanical treatments simulating natural disturbances of juvenile Betula pendula trees (stem scarring, tilting, decapitation, root exposure and stem-base burial). After 3 years, trees were cut down, conduit size and density were measured, and specific hydraulic conductivity of each tree ring was calculated. Between-tree and between-year variability in xylem conductivity was decomposed into effects of tree age, climate and disturbances using linear mixed-effects models.

KEY RESULTS

Xylem-specific hydraulic conductivity decreased significantly after treatment in decapitated, tilted and scarred trees. In the last treatment, wood anatomical adjustment was restricted to the area next to the callus tissue zone; in contrast, specific hydraulic conductivity declined over the entire stem circumference after tilting or decapitation. The response of trees with buried stems and exposed roots was generally weak. The overall effect of disturbances on inter-annual variability of wood anatomical structure was greater than the contribution of tree age and climate.

CONCLUSIONS

The results indicate that disturbances are important drivers of xylem hydraulic conductivity. Expected increases in the frequency and intensity of disturbances may alter the theoretical capacity of forest stands for water conductance with a feedback to climate.

The Dynamics of Cambial Stem Cell Activity

Stem cell populations in meristematic tissues at distinct locations in the plant body provide the potency of continuous plant growth. Primary meristems, at the apices of the plant body, contribute mainly to the elongation of the main plant axes, whereas secondary meristems in lateral positions are responsible for the thickening of these axes. The stem cells of the vascular cambium-a secondary lateral meristem-produce the secondary phloem (bast) and secondary xylem (wood). The sites of primary and secondary growth are spatially separated, and mobile signals are expected to coordinate growth rates between apical and lateral stem cell populations. Although the underlying mechanisms have not yet been uncovered, it seems likely that hormones, peptides, and mechanical cues orchestrate primary and secondary growth. In this review, we highlight the current knowledge and recent discoveries of how cambial stem cell activity is regulated, with a focus on mobile signals and the response of cambial activity to environmental and stress factors.

Plant Vascular Tissues-Connecting Tissue Comes in All Shapes

For centuries, humans have grown and used structures based on vascular tissues in plants. One could imagine that life would have developed differently without wood as a resource for building material, paper, heating energy, or fuel and without edible tubers as a food source. In this review, we will summarise the status of research on Arabidopsis thaliana vascular development and subsequently focus on how this knowledge has been applied and expanded in research on the wood of trees and storage organs of crop plants. We will conclude with an outlook on interesting open questions and exciting new research opportunities in this growing and important field.

RNA-Seq analysis of differential gene expression in Betula luminifera xylem during the early stages of tension wood formation

Background

Betula luminifera H. Winkler, which is widely distributed in southern China, is an economically important broadleaf tree species. However, little genomic information of B. luminifera is available, and little is known about the molecular mechanisms of wood formation in this species. Meanwhile, few efforts have focused on investigating the early transcriptional changes during tension wood formation in woody plants.

Results

A reference transcriptome dataset was first generated containing 45,700 Unigenes, and 35,135 (76.9%) Unigenes were annotated by a BLAST similarity search against four public databases. Then, based on an anatomical investigation, the global gene expression changes during the early stages of tension wood formation were analyzed. Gene expression profiling showed that a total of 13,273 Unigenes were differentially regulated during the early stages of tension wood formation. Most genes involved in cellulose and lignin biosynthesis were highlighted to reveal their biological importance in tension wood formation. In addition, the transcription levels of many genes involved in the auxin response pathway were significantly changed during the early stages of tension wood formation. Furthermore, 18 TFs co-expressed with key enzymes of cellulose synthesis were identified.

Conclusions

Our results revealed the transcriptional changes associated with TW formation and identified potential key genes in the regulation of this process. These results will help to dissect the molecular mechanism of wood formation and provide key candidate genes for marker-assisted selection in B. luminifera.

Transcriptional and temporal response of Populus stems to gravi-stimulation

Plants modify development in response to external stimuli, to produce new growth that is appropriate for environmental conditions. For example, gravi-stimulation of leaning branches in angiosperm trees results in modifications of wood development, to produce tension wood that pulls leaning stems upright. Here, we use gravi-stimulation and tension wood response to dissect the temporal changes in gene expression underlying wood formation in Populus stems. Using time-series analysis of seven time points over a 14-d experiment, we identified 8,919 genes that were differentially expressed between tension wood (upper) and opposite wood (lower) sides of leaning stems. Clustering of differentially expressed genes showed four major transcriptional responses, including gene clusters whose transcript levels were associated with two types of tissue-specific impulse responses that peaked at about 24-48 h, and gene clusters with sustained changes in transcript levels that persisted until the end of the 14-d experiment. Functional enrichment analysis of those clusters suggests they reflect temporal changes in pathways associated with hormone regulation, protein localization, cell wall biosynthesis and epigenetic processes. Time-series analysis of gene expression is an underutilized approach for dissecting complex developmental responses in plants, and can reveal gene clusters and mechanisms influencing development.

Loss of a highly conserved sterile alpha motif domain gene (WEEP) results in pendulous branch growth in peach trees

Plant shoots typically grow upward in opposition to the pull of gravity. However, exceptions exist throughout the plant kingdom. Most conspicuous are trees with weeping or pendulous branches. While such trees have long been cultivated and appreciated for their ornamental value, the molecular basis behind the weeping habit is not known. Here, we characterized a weeping tree phenotype in Prunus persica (peach) and identified the underlying genetic mutation using a genomic sequencing approach. Weeping peach tree shoots exhibited a downward elliptical growth pattern and did not exhibit an upward bending in response to 90° reorientation. The causative allele was found to be an uncharacterized gene, Ppa013325, having a 1.8-Kb deletion spanning the 5' end. This gene, dubbed WEEP, was predominantly expressed in phloem tissues and encodes a highly conserved 129-amino acid protein containing a sterile alpha motif (SAM) domain. Silencing WEEP in the related tree species Prunus domestica (plum) resulted in more outward, downward, and wandering shoot orientations compared to standard trees, supporting a role for WEEP in directing lateral shoot growth in trees. This previously unknown regulator of branch orientation, which may also be a regulator of gravity perception or response, provides insights into our understanding of how tree branches grow in opposition to gravity and could serve as a critical target for manipulating tree architecture for improved tree shape in agricultural and horticulture applications.

Feeling stretched or compressed? The multiple mechanosensitive responses of wood formation to bending

Background and Aims

Trees constantly experience wind, perceive resulting mechanical cues, and modify their growth and development accordingly. Previous studies have demonstrated that multiple bending treatments trigger ovalization of the stem and the formation of flexure wood in gymnosperms, but ovalization and flexure wood have rarely been studied in angiosperms, and none of the experiments conducted so far has used multidirectional bending treatments at controlled intensities. Assuming that bending involves tensile and compressive strain, we hypothesized that different local strains may generate specific growth and wood differentiation responses.

Methods

Basal parts of young poplar stems were subjected to multiple transient controlled unidirectional bending treatments during 8 weeks, which enabled a distinction to be made between the wood formed under tensile or compressive flexural strains. This set-up enabled a local analysis of poplar stem responses to multiple stem bending treatments at growth, anatomical, biochemical and molecular levels.

Key Results

In response to multiple unidirectional bending treatments, poplar stems developed significant cross-sectional ovalization. At the tissue level, some aspects of wood differentiation were similarly modulated in the compressed and stretched zones (vessel frequency and diameter of fibres without a G-layer), whereas other anatomical traits (vessel diameter, G-layer formation, diameter of fibres with a G-layer and microfibril angle) and the expression of fasciclin-encoding genes were differentially modulated in the two zones.

Conclusions

This work leads us to propose new terminologies to distinguish the 'flexure wood' produced in response to multiple bidirectional bending treatments from wood produced under transient tensile strain (tensile flexure wood; TFW) or under transient compressive strain (compressive flexure wood; CFW). By highlighting similarities and differences between tension wood and TFW and by demonstrating that plants could have the ability to discriminate positive strains from negative strains, this work provides new insight into the mechanisms of mechanosensitivity in plants.

Ethylene signaling induces gelatinous layers with typical features of tension wood in hybrid aspen

The phytohormone ethylene impacts secondary stem growth in plants by stimulating cambial activity, xylem development and fiber over vessel formation. We report the effect of ethylene on secondary cell wall formation and the molecular connection between ethylene signaling and wood formation. We applied exogenous ethylene or its precursor 1-aminocyclopropane-1-carboxylic acid (ACC) to wild-type and ethylene-insensitive hybrid aspen trees (Populus tremula × tremuloides) and studied secondary cell wall anatomy, chemistry and ultrastructure. We furthermore analyzed the transcriptome (RNA Seq) after ACC application to wild-type and ethylene-insensitive trees. We demonstrate that ACC and ethylene induce gelatinous layers (G-layers) and alter the fiber cell wall cellulose microfibril angle. G-layers are tertiary wall layers rich in cellulose, typically found in tension wood of aspen trees. A vast majority of transcripts affected by ACC are downstream of ethylene perception and include a large number of transcription factors (TFs). Motif-analyses reveal potential connections between ethylene TFs (Ethylene Response Factors (ERFs), ETHYLENE INSENSITIVE 3/ETHYLENE INSENSITIVE3-LIKE1 (EIN3/EIL1)) and wood formation. G-layer formation upon ethylene application suggests that the increase in ethylene biosynthesis observed during tension wood formation is important for its formation. Ethylene-regulated TFs of the ERF and EIN3/EIL1 type could transmit the ethylene signal.