Direct writing of customized structural-color graphics with colloidal photonic inks

Detection of isomers based on silica colloidal crystals doped with noble metals

Structural colors (or stopbands) of different photonic crystals (PCs) could be changed by doping different concentrations of noble metals. The maximum stopband shift of PCs is about 61 nm when Pd colloid nanoparticles are doped into the PCs. Varied of PCs have been used for detecting chemicals, but it is uncommon for detection of isomers based on the simple PCs from SiO2 spheres and noble metals. Although difference of refractive indices of m-xylene and p-xylene is only 0.002, after noble metals as intermedium are doped into PCs, difference of the total average stopband shifts is about 37 nm. The total stopband shifts are related to diameters of SiO2 spheres, species of analytes, doping amounts and kinds of noble metal nanoparticles. The proposed strategy provides a convenient, cheap, trace detection method to distinguish isomers. These PCs have potential applications in display, isomer recognition and anti-counterfeiting.

3D Printing of Stiff Photonic Microparticles into Load-Bearing Structures

Structural colors are bright and possess a remarkable resistance to light exposure, humidity, and temperature such that they constitute an environmentally friendly alternative to chemical pigments. Unfortunately, upscaling the production of photonic structures obtained via conventional colloidal self-assembly is challenging because defects often occur during the assembly of larger structures. Moreover, the processing of materials exhibiting structural colors into intricate 3D structures remains challenging. To address these limitations, rigid photonic microparticles are formulated into an ink that can be 3D printed through direct ink writing (DIW) at room temperature to form intricate macroscopic structures possessing locally varying mechanical and optical properties. This is achieved by adding small amounts of soft microgels to the rigid photonic particles. To rigidify the granular structure, a percolating hydrogel network is formed that covalently connects the microgels. The mechanical properties of the resulting photonic granular materials can be adjusted with the composition and volume fraction of the microgels. The potential of this approach is demonstrated by 3D printing a centimeter-sized photonic butterfly and a temperature-responsive photonic material.

Precision printing and control of total internal reflection structural colors: Applications in anti-counterfeiting and color blindness detection

HYPOTHESIS

The fabrication and optical performance of structural colors are influenced by microstructure geometry and surface interactions. Total internal reflection (TIR)-based structural colors, formed by microspherical crown structures on hydrophobic substrates, are expected to exhibit tunable optical properties such as single-sided visibility and angle dependence. By precisely controlling droplet volume and substrate wettability, it should be possible to achieve customizable anti-counterfeiting features and color blindness detection applications.

EXPERIMENTS

Polyacrylic acid (PAA)-based inks were formulated with optimized molecular weight, solid content, and solvent composition to enable stable precision printing. Microspherical crown structures were printed on hydrophobic substrates under varying droplet volumes and contact angles. The printed patterns were characterized using scanning electron microscopy (SEM) and optical spectroscopy to analyze their morphology and color tunability. Environmental stability was tested under UV exposure, high temperatures, and freezing conditions.

FINDINGS

The printed TIR structural colors displayed single-sided visibility, angle-dependent reflectance, and high color saturation. Controlled variations in microstructure size and contact angle enabled fine-tuning of the optical response. The technique successfully produced transparent anti-counterfeiting labels and a single-sample diagnostic tool for distinguishing different types of color blindness. The structural colors remained stable under environmental stress, demonstrating their potential for practical applications in security features and biomedical diagnostics.

Towards injured joint rehabilitation: structural color hydrogels for accelerated wound healing and rehabilitation exercise monitoring

Joint injuries caused by severe acute trauma seriously affect patients' mobility and quality of life. Traumatic or postoperative wound healing and rehabilitation training are both essential for restoring joint functions, calling for effective wound healing materials that are also capable of monitoring rehabilitation training for joint condition evaluation and physical therapy guiding. Herein, a structural color hydrogel for wound care and naked-eye rehabilitation exercise monitoring of injured joints is designed by constructing a hybrid double-network, which contains a covalently crosslinked network and a Zn2+ coordination based dynamic network. The crosslinking formed by Zn2+ coordination endows the structural color hydrogel with enhanced mechanical properties for joint wounds with motion requirements, as well as antibacterial, anti-inflammatory, and pro-angiogenic properties that promote wound healing. Meanwhile, the Poisson's ratio of the structural color hydrogel can be easily tuned by varying the covalently-crosslink density to achieve sensibility ranging from 3.6 nm to 6.2 nm photonic-bandgap shift per 1% strain, achieving a remarkable color change responding to joint range-of-motion from minimal (0-2°) to wide-range (0-90°) bending during rehabilitation exercises. This structural color hydrogel provides an approach to the multi-stage management of joint injuries and real-time clinical insights into rehabilitation progress.

Bio-Based Multicompartment Photonic Pigments: Unlocking Non-Iridescent Pure RGB Structural Colors for Versatile Chromatic Engineering

Non-iridescent photonic glass pigments of block copolymers show great potential for sustainable structural coloration. However, the ability to create accurate RGB color mixtures for real-world applications is limited by the prevalent use of non-degradable, fossil oil-derived components and the difficulty in achieving pure red hues. This work presents an alternative strategy for achieving more sustainable structural coloration by fabricating composite photonic pigments through controlled self-assembly of water, vegetable oil, and biodegradable bottlebrush block copolymers (BBCPs) in a complex emulsion system. The obtained photonic balls feature unprecedented multicompartment structures characterized by a short-range ordered assembly of water nanodroplets stabilized by the BBCPs, along with oil droplets stabilized by these nanodroplets, which substantially enhances resistance to Ostwald ripening. Furthermore, a new structural model is introduced to eliminate disordered scattering, successfully creating a pure red structural color and overcoming a long-standing limitation in versatile chromatic engineering.

Dynamic multimodal information encryption combining programmable structural coloration and switchable circularly polarized luminescence

Multimodal optical-materials are highly desirable due to their advantages in enhancing information security, though independent modulation is challenging, especially accurately controlling the orthogonal relationship between the structural coloration (SC) and fluorescence (FL) pattern. Herein, we report a strategy which combines programmable structural coloration and switchable circularly polarized luminescence (CPL) for multimodal information encryption. Using photomask with aligned grating, programmable periodic patterns are fabricated on a polydiacetylene (PDA) gel film, which produces image in tunable structural colors. Introducing a chiral fluorescence layer containing perovskite nanocrystals and twisted-stacking Ag nanowires (NWs) bilayers, which provides stimuli-responsive FL and CPL with high dissymmetry factor (glum, up to 1.3). Importantly, the structural coloration information and FL patterns (including CPL pattern) can be independently modulated without mutual interference, even selectively concealed or exposed by varying microstructure design of the cross-linked PDA gel or by acetonitrile treatment.

Disappearing and reappearing of structure order in colloidal photonic crystals

Mechanoresponsive colloidal photonic crystals embedded in elastic solid matrices exhibit tunable optical properties under mechanical force, showing great potential for various applications. However, the response of colloidal crystals embedded in a liquid matrix remains largely unexplored. In this study, we investigate the structural and optical transitions of colloidal crystals composed of particles suspended in a liquid oligomer under pressing and shear forces. We observe that pressing induces a transition from an ordered to a disordered particle arrangement, while subsequent bending shear, such as simple hand-flipping, restores the ordered structure. This reversible transition produces press-induced optical traces that can be erased by subsequent shear, making this material a promising candidate for applications in reversible direct-writing photonic paper and anti-counterfeiting technologies. Our work provides new insights into the structural dynamics of liquid colloidal photonic crystals under mechanical force and highlights their potential for mechanoresponsive applications.

Full-Spectrum Mechanochromic Photonic Films with Large Interparticle Distance

Non-close-packed crystalline arrays of colloidal particles in an elastic matrix exhibit mechanochromism. However, small interparticle distances often limit the range of reversible color shifts and reduce reflectivity during a blueshift. A straightforward, reproducible strategy using matrix swelling to increase interparticle distance and improve mechanochromic performance is presented. Photonic composites are initially prepared with silica particle arrays embedded in an elastomer matrix at volume fractions of 0.35-0.5. To increase interparticle distance, the composites are immersed in an elastomer-forming monomer, causing the matrix to swell, followed by photopolymerization, thereby producing liquid-free composites. The degree of swelling is controllable up to 3.16, depending on monomer choice, matrix volume fraction, and crosslinking density. The process can be repeated to further increase swelling up to 10.36. This method can reduce the volume fraction of silica particles from 40% to 3.8%, while interparticle distance increases from 53 to 257 nm. The swollen photonic composites exhibit a full visible spectrum under compression, while minimizing reflectivity loss. This allows red-colored photonic composites to be transformed into vivid multicolor patterns when compressed with stamps featuring spatial height variations.

Retroreflective Multichrome Microdome Arrays Created by Single-Step Reflow

Structural colors are known for their tunability, fade resistance, and eco-friendliness. Recent advancements have shown that such colors can be efficiently produced using total internal reflection (TIR) on high-refractive-index convex microstructures without the need for periodic nanostructures. However, a reproducible, fast, and programmable production strategy for these microstructures is essential for commercial applications. Here, a single-step method is reported for creating multicolor patterns by transforming photolithographically-patterned micropillars into microdomes through thermal reflow. These micropillars, uniform in height but varying in diameter, are converted into microdomes that differ in diameter and height, which display a full spectrum of structural colors, creating a versatile color palette. This process enables the production of high-resolution multicolor graphics using a rainbow color set, with high reproducibility. Additionally, by mixing distinct microdomes and adjusting their densities, a rich variety of color presentations can be achieved, enabling the recreation of arbitrary color images with microdome arrays. The variable heights of the microdomes also allow for dynamic discoloration or color changes through mechanical compression. The high reproducibility and scalability of this method hold significant commercial promise for various optical applications.

NIR-Reflective Black Photonic Films Designed for Effective LiDAR Recognition

Conventional dark-tone paints absorb both visible light and near-infrared (NIR) wavelengths, posing a challenge for light detection and ranging (LiDAR) recognition in autonomous driving. To overcome this issue, various chemical and structural coating materials have been explored to selectively reflect NIR. In this study, we newly propose colloidal photonic crystals with a stopband in the NIR range, fabricated through the spontaneous formation of crystalline arrays of silica particles dispersed in a photocurable resin, as a potential solution. The stopband position is finely adjusted by controlling the volume fraction of particles, and the translucent films are rendered black by incorporating carbon black nanoparticles into the interstitial regions. By optimizing the concentration of carbon black, we achieve a balance of low visible light and high LiDAR intensity. These black photonic films demonstrate superior LiDAR intensity compared to commercial dark-tone paints and perform on par with the perylene black-deposited white coating, one of the most promising LiDAR-assistive materials currently available, under normal reflection conditions. Additionally, the photonic films are highly durable, thermally stable, nontoxic, and environmentally friendly, making them promising candidates for LiDAR-assistive coatings.

Multidimensional Resonance Controlled by Critical Size in Printed Binary Colloidal Crystals for High-Contrast Imaging

Colloidal crystal engineering enables the precise construction of structures with remarkable properties. However, the flexible and synergistic regulation of multiple properties of colloidal crystals remains a significant challenge. Here, we inspire from Brazilian opals to self-assemble polymer nanoparticles in the gaps of a single-layer opal substrate to fabricate large-scale binary colloidal crystals (BCCs). These BCCs have well-defined sizes, compositions, and dimensions, of which the crystallization process is finely controlled by the Marangoni flow. Notably, we find a critical size for the simultaneous and independent regulation of their lattice resonance wavelength and intensity, forming a full-color palette. Moreover, these BCCs as optical coatings allow for high-contrast imaging of microbials, benefiting from strong spatial confinement. Compared to glass in clinical smearing, they have an order of magnitude improvement in chromatism without dyeing. This work demonstrates that BCCs hold great potential in creating multifunctional devices for various applications including information display, biological detection, and optical imaging.

Brush-Like Polymeric Gels Enabled Photonic Crystals toward Ultrasensitive Cosolvent Chromism

Responsive photonic crystals (RPCs) exhibit dynamic chromism upon trigger by various solvents, showing potential applications in qualitative identification and quantitative analysis of multicomponent solvents. However, distinguishing similar solvents, especially traces of cosolvents, remains challenging due to the limited sensitivity of RPCs. To address this, we herein introduce brush-like polymeric gels inside photonic crystals, forming a brush-like polymeric photonic gel (BPPG) that can trace tiny component changes. In this BPPG system, the acrylate backbones and polyethylene glycol (PEG) side-chains stretch incrementally due to the cosolvency of ethanol-water mixtures, resulting in highly sensitive chromatic responses within ethanol-rich concentrations. With water content varying slightly from 0 to 1 vol %, the reflection wavelength of BPPG can sharply redshift over 30 nm, leading to very noticeable changes in structural color. This enhanced sensitivity makes BPPG suitable for real-time, in situ purity monitoring of absolute ethanol during storage, transportation, and other applications.

Size-Dependent Magnetic Responsiveness of a Photonic Crystal of Graphene Oxide Nanosheets

A magnetically responsive photonic crystal of colloidal nanosheets can exhibit a controllable structural color, offering diverse potential applications. In this study, we systematically investigated how the lateral sizes of graphene oxide (GO) nanosheets affect their magnetic responsiveness in a photonic system. Contrary to the prediction that larger lateral sizes of nanosheets would be more responsive to an applied magnetic field based on the magnetic energy of anisotropic materials, we discovered that GO nanosheets with larger lateral sizes in the photonic system scarcely responded to a 12 T magnetic field. The lack of magnetic response may be due to the strongly restricted rotational motion of GO nanosheets by mutual electrostatic forces. In contrast, GO nanosheets with medium lateral sizes readily responded to the 12 T magnetic field, forming a uniaxially oriented structure that resulted in a vivid structural color. However, smaller GO nanosheets displayed a less vivid structural color, possibly because of less structural ordering of GO nanosheets. Finally, we found that the photonic crystal of GO nanosheets with optimized lateral sizes responded effectively to the 12 T magnetic field across various GO concentrations, resulting in a vivid and tunable structural color.

Droplet-Pen Writing of Ultra-Uniform Graphene Pattern for Multi-Spectral Applications

Artificial optical patterns bring wide benefits in applications like structural color display, photonic camouflage, and electromagnetic cloak. Their scalable coating on large-scale objects will greatly enrich the multimodal-interactive society. Here, a droplet-pen writing (DPW) method to directly write multi-spectral patterns of thin-film graphene is reported. By amphiphilicity regulations of 2D graphene nanosheets, ultra-uniform and ultrathin films can spontaneously form on droplet caps and pave to the substrate, thus inducing optical interference. This allows the on-surface patterning by pen writing of droplets. Specifically, drop-on-demand thin films are achieved with millimeter lateral size and uniformity up to 97% in subwavelength thickness (<100 nm), corresponding to an aspect ratio of over 30 000. The pixelated thin-film patterns of disks and lines in an 8-inch wafer scale are demonstrated, which enable low-emittance structural color paintings. Furthermore, the applications of these patterns for dual-band camouflage and infrared-to-visible encryption are investigated. This study highlights the potential of 2D material self-assembly in the large-scale preparation and multi-spectral application of thin film-based optical patterns.

Ultra-Fast Fabrication of Mechanical-Water-Responsive Color-Changing Photonic Crystals Elastomers and 3D Complex Devices

The traditional fabrication of opal-structured photonic crystals is constrained by the rate of solvent evaporation, a process that is not only time-consuming but also labor-intensive. This study introduces a paradigm shift by incorporating silica nanoparticles (SiNPs) with high zeta potentials and hydrogen bonding capabilities into an elastomeric matrix, resulting in a novel non-close-packed structure. This innovation circumvents the limitations of conventional methods by enabling the rapid formation of photonic inks (PI) into vibrant and luminous photonic elastomers (PEs) within seconds. These PEs demonstrate remarkable mechanochromic properties, exhibiting dynamic color changes across the visible spectrum in response to tensile and compressive deformations. Furthermore, the presence of hydroxyl groups endows the PEs with superior water-responsiveness, which can be finely tuned through the ink formulation. The elimination of solvent evaporation dependency facilitates the fabrication of macroscopic photonic crystal devices with complex geometries using digital light processing (DLP)-based 3D printing. This approach ensures exceptional optical performance and high customization potential. The resulting PEs hold significant promise for applications in smart wearables, soft robotics, and advanced human-machine interface technologies.

Scalable Macroscopic Engineering from Polymer-Based Nanoscale Building Blocks: Existing Challenges and Emerging Opportunities

Natural materials exhibit exceptional properties due to their hierarchical structures spanning from the nano- to the macroscale. Replicating these intricate spatial arrangements in synthetic materials presents a significant challenge as it requires precise control of nanometric features within large-scale structures. Addressing this challenge depends on developing methods that integrate assembly techniques across multiple length scales to construct multiscale-structured synthetic materials in practical, bulk forms. Polymers and polymer-hybrid nanoparticles, with their tunable composition and structural versatility, are promising candidates for creating hierarchically organized materials. This review highlights advances in scalable techniques for nanoscale organization of polymer-based building blocks within macroscopic structures, including block copolymer self-assembly with additive manufacturing, polymer brush nanoparticles capable of self-assembling into larger, ordered structures, and direct-write colloidal assembly. These techniques offer promising pathways toward the scalable fabrication of materials with emergent properties suited for advanced applications such as bioelectronic interfaces, artificial muscles, and other biomaterials.

3D Printing Photonic Crystals: A Review

Living organisms in nature possess diverse and vibrant structural colors generated from their intrinsic surface micro/nanostructures. These intricate micro/nanostructures can be harnessed to develop a new generation of colorful materials for various fields such as photonics, information storage, display, and sensing. Recent advancements in the fabrication of photonic crystals have enabled the preparation of structurally colored materials with customized geometries using 3D printing technologies. Here, a comprehensive review of the historical development of fabrication methods for photonic crystals is provided. Diverse 3D printing approaches along with the underlying mechanisms, as well as the regulation methods adopted to generate photonic crystals with structural color, are discussed. This review aims to offer the readers an overview of the state-of-the-art 3D printing techniques for photonic crystals, present a guide and considerations to fabricate photonic crystals leveraging different 3D printing methods.

Enhanced Colorimetric Detection of Volatile Organic Compounds Using a Dye-Incorporated Photonic Crystal-Based Sensor Array

Chemoresponsive dyes offer the potential to selectively detect volatile organic compounds (VOCs) unique to certain disease states. Among different VOC sensing techniques, colorimetric sensing offers the advantage of facile recognition. However, it is often challenging to discern the color changes by the naked eye. Here, highly sensitive colorimetric VOC sensor arrays from dye-incorporated colloidal photonic crystals (dye-cPhCs) are reported. cPhCs are scalably fabricated on a 4-inch wafer by spin-coating of silica nanoparticles (NPs) dispersed in a photo-cross-linkable monomer, where the gradient shear flow along the film thickness creates densely-packed square arrays of NPs in the top layers, whereas the bulk is quasi-amorphous with larger periodicities. The broadened reflection peak allows for augmented dye absorption originating from the overlap between the photonic bandgap edge of the cPhC and the dye absorption peak, leading to a more noticeable color change upon exposure to VOCs. The sensor array generates distinct color difference maps for acetaldehyde, acetone, and acetic acid, respectively, without any data amplification. The limit of detection for acetaldehyde, acetone, and acetic acid is 1, 0.1, and 0.02 ppm, respectively. Moreover, VOC can be diagonalized by visually intuitive pattern recognition, and principal component analysis at reduced dimensionality is demonstrated.

Facile Synthesis of Soft Core-Shell Nanospheres for Constructing Multiresponsive Photonic Crystal Security Patterns

Responsive photonic crystals (RPCs) presenting tunable structural colors under external stimuli are widely applied in the fields of dynamic displays, sensors, and anticounterfeiting. However, the development of multiresponsive photonic crystal (MRPC) films possessing versatile variable optical properties remains a significant challenge due to the tedious synthetic procedure of multifunctional building blocks and complex assembly processes, thereby constraining their extensive applications. In the present work, a series of soft nanospheres with a hydrophobic cores and responsive hydrophilic shells have been synthesized by a facile one-step surfactant-free emulsion polymerization method. The MRPC patterns were then prepared by depositing soft nanosphere emulsions onto the 3D-printed substrates with a topological structure followed by drying at room temperature. The shells of soft nanospheres deformed and fused with each other, resulting in the formation of transparent MRPC film patterns. The MRPC patterns exhibited brilliant structural color in a wet state but lost the color again after complete drying. Such a reversible structural color was ascribed to the change of the refractive index (RI) of the hydrophilic shell layers of nanospheres according to wetting/drying state shifting. Moreover, the on-demand designed MRPC patterns could rapidly respond to external stimuli of temperature, pH, and organic solvents in a reversible manner, and multichannel encrypted security labels were also demonstrated. We postulate that our facile and feasible approach can be applied to the systematic design and large-scale production of MRPC patterns for a variety of applications.

Ultrafast Laser Manipulation of In-Lattice Plasmonic Nanoparticles

Plasmonic nanoparticles enable manipulation and enhancement of light fields at deep subwavelength scales, leading to structures and devices for diverse applications in optics. Despite hybrid plasmonic materials display remarkable optical properties due to interactions between components in nanoproximity, scalable production of plasmonic nanostructures within a single-crystalline matrix to achieve an ideal plasmon-crystal interface remains challenging. Here, a novel approach is presented to realize efficient manipulation of in-lattice plasmonic nanoparticles. Employing ultrafast-laser-driven plasmonic nanolithography, metallic nanoparticles with controllable morphology are precisely defined in the crystalline lattice of yttrium aluminum garnet (YAG) crystal. Through direct ion implantation, hybrid plasmonic material composed of nanoparticles embedded in a sub-surface amorphous YAG layer is created. Subsequently, femtosecond laser pulses guide formation and reshaping of plasmonic nanoparticles from the amorphous layer into the single-crystalline matrix along direction of light propagation, facilitated by a plasmon-mediated evolution of laser energy deposition. By tailoring resonance modes and optimizing the coupling between structured particle assemblies, a range of applications including polarization-dependent absorption and nonlinearity, controllable photoluminescence, and structural color generation is demonstrated. This research introduces a new approach for fabricating advanced optical materials featuring in-lattice plasmonic nanostructures, paving the way for the development of diverse functional photonic devices.

Biomimetic Colored Coating toward Robust Display under Hostile Conditions

Structural colors particularly of the angle-independent category stemming from wavelength-dependent light scattering have aroused increasing interest due to their considerable applications spanning displays and sensors to detection. Nevertheless, these colors would be heavily altered and even disappear during practical applications, which is related with the variation of refractive index mismatch by liquid wetting/infiltrating. Inspired by bird feathers, we propose a simple deposition toward the coating with angle-independent structural color and superamphiphobicity. The coating is composed of ∼200 nm-sized channel-type structures between hollow silica and air nanostructures, exhibiting a robust sapphire blue color independent of intense liquid intrusion, which duplicates the characteristics of the back feather of Eastern Bluebird. A high color saturation and superamphiphobicity of the biomimetic coating are optimized by manipulating the coating parameters or adding black substances. Excellent durability under harsh conditions endows the coating with long-term service life in various extreme environments.

Host-Guest Interaction Mediated Interfacial Co-Assembly of Cyclodextrin and Bottlebrush Surfactants for Precisely Tunable Photonic Supraballs

Investigations of host-guest interactions at water-oil (w/o) interfaces are limited in single emulsion systems producing simple self-assembled objects with limited uses. Here, within hierarchically ordered water-in-oil-in-water (w/o/w) multiple emulsion droplets, interfacial self-assembly of (polynorbornene-graft-polystyrene)-block-(polynorbornene-graft-polyethylene glycol) (PNPS-b-PNPEG) bottlebrush block copolymers can be precisely controlled through host-guest interactions. α-Cyclodextrin (α-CD) in the aqueous phase can thread onto PEG side chains of the bottlebrush surfactants adsorbed at the w/o interface, leading to dehydration and collapsed chain conformation of the PEG block. Consequently, spherical curvature of the w/o internal droplets increases with the increased asymmetry of the bottlebrush molecules, producing photonic supraballs with precisely tailored structural parameters as well as photonic bandgaps. This work provides a simple but highly effective strategy for precise manipulation of complex emulsion systems applicable in a variety of applications, such as photonic pigments, cosmetic products, pesticides, artificial cells, etc.

Chemically and geometrically programmable photoreactive polymers for transformational humidity-sensitive full-color devices

Humidity-sensitive structural color has emerged as a promising technology due to its numerous advantages that include fast response, intuitiveness, stand-alone capability, non-toxicity, as well as resistance to thermal and chemical stresses. Despite immense technological advancements, these structural colors lack the ability to present independent multiple images through transformation. Herein, we present an approach to address this constraint by introducing a chemically and geometrically programmable photoreactive polymer which allows preparation of transformational humidity-sensitive full-color devices. Utilizing azido-grafted carboxymethyl cellulose (CMC-N3) allows adjustments in swelling properties based on the grafting ratio (Γ) of azido groups upon UV-induced crosslinking. Also, the distinctive photo-curability of the polymer enables precise geometric control to achieve vivid colors in combination with disordered plasmonic cavities. Our work culminates in the development of an advanced anti-counterfeiting multiplexer capable of displaying different full-color images with variation in humidity levels. The showcased color displays signify pivotal breakthroughs in tunable optical technologies, illustrating how chemical modifications in hydrogels provides additional degrees of freedom in the design of advanced optical devices.

Structural Color Enhancement through Synchronizing Natural Convection and Marangoni Flow in Pendant Drops

Structural color, renowned for its enduring vibrancy, has been extensively developed and applied in the fields of display and anticounterfeiting. However, its limitations in brightness and saturation hinder further application in these areas. Herein, we propose a pendant evaporation self-assembly method to address these challenges simultaneously. By leveraging natural convection and Marangoni flow synchronization, the self-assembly process enhances the dynamics and duration of colloidal nanoparticles, thereby enhancing the orderliness of colloidal photonic crystals. On average, this technique boosts the brightness of structural color by 20% and its saturation by 35%. Moreover, pendant evaporation self-assembly is simple and convenient to operate, making it suitable for industrial production. We anticipate that its adoption will remarkably advance the industrialization of structural color, facilitating its engineering applications across various fields, such as display technology and anticounterfeiting identification.

Strain to shine: stretching-induced three-dimensional symmetries in nanoparticle-assembled photonic crystals

Stretching elastic materials containing nanoparticle lattices is common in research and industrial settings, yet our knowledge of the deformation process remains limited. Understanding how such lattices reconfigure is critically important, as changes in microstructure lead to significant alterations in their performance. This understanding has been extremely difficult to achieve due to a lack of fundamental rules governing the rearrangements. Our study elucidates the physical processes and underlying mechanisms of three-dimensional lattice transformations in a polymeric photonic crystal from 0% to over 200% strain during uniaxial stretching. Corroborated by comprehensive experimental characterizations, we present analytical models that precisely predict both the three-dimensional lattice structures and the macroscale deformations throughout the stretching process. These models reveal how the nanoparticle lattice and matrix polymer jointly determine the resultant structures, which breaks the original structural symmetry and profoundly changes the dispersion of photonic bandgaps. Stretching induces shifting of the main pseudogap structure out from the 1st Brillouin zone and the merging of different symmetry points. Evolutions of multiple photonic bandgaps reveal potential optical singularities shifting with strain. This work sets a new benchmark for the reconfiguration of soft material structures and may lay the groundwork for the study of stretchable three-dimensional topological photonic crystals.

Laser-induced locally controllable craze-like microstructures for polymer white structural coloration

As a promising candidate for the inkless coloring method, white structural color has undergone widespread investigation because of its fascinating properties. Recently, various methods have been developed to prepare disordered micro/nanostructures to produce white structural color. However, complex and high-cost processing procedures severely restrict the efficient and large-scale preparation of disordered micro/nanostructures for achieving white structural color. Herein, we report an ingenious way to realize white structural color by laser-inducing craze-like microstructures in core-shell microfiber-based polymers. A microfiber with copper nanowires (CuNWs) as the core surrounded by a polyformaldehyde (POM) shell is prepared by a simple in situ fibrillation method. The craze-like microstructures with micro/nanofibrils and micropores are locally constructed in polymers by a facile, efficient, inexpensive, controllable, and environmentally friendly laser direct writing (LDW) technique. Ascribed to the broadband visible light reflection caused by disordered microstructures, the laser-induced craze-like microstructures in polymers based on CuNWs@POM core-shell microfibers exhibit a distinct white structural color. This work paves a way for achieving white structural color and provides a novel insight for utilizing the previously considered useless crazing phenomenon.

Metal-organic framework photonic crystals with bidisperse particles-based brilliant structural colors and high optical transparency for elaborate anti-counterfeiting

Photonic crystals (PCs) have attracted great interest and wide applications in displays, printing, anti-counterfeiting, etc. However, two main challenges significantly hinder their applications: 1) the tradeoff between high optical transparency across the whole visible range and brilliant colors requiring a large refractive index contrast (Δn), and 2) the way of regulating structural colors by altering tens of different sizes. To address these issues, a new type of metal-organic framework (MOF)-based transparent photonic crystal (TPC) has been fabricated through self-assembling MOF particles into three-dimensional ordered structures which were then infiltrated by polydimethylsiloxane (PDMS). Compared to conventional PCs, these TPCs exhibit 1) both brilliant forward iridescent structural colors and high transmittance (>75 %) across the whole visible spectra range, and 2) conveniently adjustable colors based on bidisperse particles. The unique color-generating mechanism of the light diffraction by each plane lattice and the small Δn between MOF particles and PDMS are the keys to TPCs' characteristics. Moreover, the prepared invisible anti-counterfeit labels can reversibly hide-reveal patterns with elaborate and exchangeable color contrast in a non-destructive way, showing potential applications in anti-counterfeiting, information encryption, and optical devices.

Fine Optimization of Colloidal Photonic Crystal Structural Color for Physically Unclonable Multiplex Encryption and Anti-Counterfeiting

Robust anti-counterfeiting techniques aim for easy identification while remaining difficult to forge, especially for high-value items such as currency and passports. However, many existing anti-counterfeiting techniques rely on deterministic processes, resulting in loopholes for duplication and counterfeiting. Therefore, achieving high-level encryption and easy authentication through conventional anti-counterfeiting techniques has remained a significant challenge. To address this, this work proposes a solution that combined fluorescence and structural colors, creating a physically unclonable multiplex encryption system (PUMES). In this study, the physicochemical properties of colloidal photonic inks are systematically adjusted to construct a comprehensive printing phase diagram, revealing the printable region. Furthermore, the brightness and color saturation of inkjet-printed colloidal photonic crystal structural colors are optimized by controlling the substrate's hydrophobicity, printed droplet volume, and the addition of noble metals. Finally, fluorescence is incorporated to build PUMES, including macroscopic fluorescence and structural color patterns, as well as microscopic physically unclonable fluorescence patterns. The PUMES with intrinsic randomness and high encoding capacity are authenticated by a deep learning algorithm, which proved to be reliable and efficient under various observation conditions. This approach can provide easy identification and formidable resistance against counterfeiting, making it highly promising for the next-generation anti-counterfeiting of currency and passports.

Structural Color Inks Containing Photonic Microbeads for Direct Writing

Printing structurally colored patterns is of great importance for providing customized graphics for various purposes. Although a direct writing technique has been developed, the use of colloidal dispersions as photonic inks requires delicate printing conditions and restricts the mechanical and optical properties of printed patterns. In this work, we produce elastic photonic microbeads through scalable bulk emulsification and formulate photonic inks containing microbeads for direct writing. To produce the microbeads, a photocurable colloidal dispersion is emulsified into a highly concentrated sucrose solution via vortexing, which results in spherical emulsion droplets with a relatively narrow size distribution. The microbeads are produced by photopolymerization and are then suspended in urethane acrylate resin at volume fractions of 0.35-0.45. The photonic inks retain high color saturation of the microbeads and offer enhanced printability and dimensional control on various target substrates including fabrics, papers, and even skins. Importantly, the printed graphics show high mechanical stability as the elastic microbeads are embedded in the polyurethane matrix. Moreover, the colors show a wide viewing angle and low-angle dependency due to the optical isotropy of individual microbeads and light refraction at the air-matrix interface. We postulate that this versatile direct writing technique is potentially useful for structural color coating and printing on the surfaces of arbitrary 3D objects.

Advanced Additive Manufacturing of Structurally-Colored Architectures

Direct ink writing (DIW) stands out as a facile additive manufacturing method, minimizing material waste. Nonetheless, developing homogeneous Bingham inks with high yield stress and swift liquid-to-solid transitions for versatile 3D printing remains a challenge. In this study, high-performance Bingham inks are formulated by destabilizing silica particle suspensions in acrylate-based resin. A colloidal network forms in the shear-free state through interparticle attraction, achieved by disrupting the solvation layer of large resin molecules using polar molecules. The network is highly dense, with evenly distributed linkage strength as monodisperse particles undergo gelation at an ultra-high fraction. Crucially, the strength is calibrated to ensure a sufficiently large yield stress, while still allowing the network to reversibly melt under shear flow. The inks immediately undergo a liquid-to-solid transition upon discharge, while maintaining fluidity without nozzle clogging. The dense colloidal networks develop structural colors due to the short-range order. This enables the rapid and sophisticated drawing of structurally-colored 3D structures, relying solely on rheological properties. Moreover, the printed composite structures exhibit high mechanical stability due to the presence of the colloidal network, which expands the range of potential applications.

3D-Printed Biomimetic Structural Colors

Resolution control and expansibility have always been challenges to the fabrication of structural color materials. Here, a facile strategy to print cholesteric liquid crystal elastomers (CLCEs) into complex structural color patterns with variable resolution and enhanced expansibility is reported. A volatile solvent is introduced into the synthesized CLC oligomers, modifying its rheological properties and allowing direct-ink-writing (DIW) under mild conditions. The combination of printing shear flow and anisotropic deswelling of ink drives the CLC molecules into an ordered cholesteric arrangement. The authors meticulously investigate the influence of printing parameters to achieve resolution control over a wide range, allowing for the printing of multi-sized 1D or 2D patterns with constant quality. Furthermore, such solvent-cast direct-ink-writing (DIW) strategy is highly expandable and can be integrated easily into the DIW of bionic robots. Multi-responsive bionic butterfly and flower are printed with biomimetic in both locomotion and coloration. Such designs dramatically reduced the processing difficulty of precise full-color printing and expanded the capability of structural color materials to collaborate with other systems.

Hyperreflective photonic crystals created by shearing colloidal dispersions at ultrahigh volume fraction

Colloidal crystallization serves as one of the most economic and scalable production methods for photonic crystals. However, insufficient optical performance, nonuniformity and low reproducibility remain challenges for advanced high-value applications. In this study, we optimally formulate a photocurable dispersion of silica particles and apply shear flow to unify the orientation of the colloidal crystals, ensuring high optical performance and uniformity. The silica particles experience strong repulsion at ultrahigh volume fractions of 50% but demonstrate low mobility, leading to polycrystalline structures. Applying shear flow to the dispersions allows the silica particles to rearrange into larger crystalline domains with a unidirectional orientation along the flow. This shear-induced structural change produces absolute reflectivity at the stopband as high as 90% and a high transparency of 90% at off-resonant wavelengths with minimal diffusive scattering. Furthermore, the strong interparticle repulsion ensures a uniform volume fraction of particles throughout the dispersion, reducing deviations in the optical properties. We intricately micropattern the photocurable dispersions using photolithography. Additionally, the photonic films and patterns can be stacked to form multiple layers, displaying mixed structural colors and multiple reflectance peaks without sacrificing reflectivity. These superior photonic materials hold promise for various optical applications, including optical components and anticounterfeiting patches.

Sustainable Cellulose-Derived Organic Photonic Gels with Tunable and Dynamic Structural Color

Structural color is a fascinating optical phenomenon arising from intricate light-matter interactions. Biological structural colors from natural polymers are invaluable in biomimetic design and sustainable construction. Here, we report a renewable, abundant, and biodegradable cellulose-derived organic gel that generates stable cholesteric liquid crystal structures with vivid structural colors. We construct the chromatic gel using a 68 wt % hydroxypropyl cellulose (HPC) matrix, incorporating distinct polyethylene glycol (PEG) guest molecules. The PEGs contain peculiar end groups with tailored polarity, allowing for precise positioning on the HPC helical backbone through electrostatic repulsion between the PEG and HPC chains. This preserves the HPC's chiral nematic phase without being disrupted. We demonstrate that the PEGs' polarity tunes the HPC gel's reflective color. Additionally, gels with variable polarities are highly sensitive to temperature, pressure, and stretching, resulting in rapid, continuous, and reversible color changes. These exceptional dynamic traits establish the chiral nematic gel as an outstanding candidate for next-generation applications across displays, wearables, flexible electronics, health monitoring, and multifunctional sensors.

Full-Color Generation via Phototunable Mono Ink for Fast and Elaborate Printings

Unlike pigment-based colors, which are determined by their molecular structure, diverse colors can be expressed by a regular arrangement of nanomaterials. However, existing techniques for constructing such nanostructures have struggled to combine high precision and speed, resulting in a narrow gamut, and prolonged color fabrication time. Here, this work reports a phototunable mono ink that can generate a wide range of colors by controlling regularly arranged nanostructure. Core-shell growth controlled by polymerization time precisely regulates the distance between arranged particles at a nanometer-scale, enabling the generation of various colors. Moreover, the wide and thin arrangement induces constrained out-of-plane growth, thus facilitating the intricate color generation at the desired location via photopolymerization. Upon terminating polymerization by oxygen gas, the generated colors are readily fixed and kept stable. Utilizing programmed ultraviolet illumination, large-scale and high-resolution (≈1 µm) full-color printings are demonstrated at high speed (100 mm2 s-1 ).

3D printing of non-iridescent structural color inks for optical anti-counterfeiting

In this work, structural color inks with practical significance in anti-counterfeiting applications have been successfully manufactured by facilely mixing SiO2@PDA@PHEMA hybrid colloidal particles with the mediated molecules of HEMA. The appropriate rheological properties of these photonic inks provide high viscosity and self-supporting performance, ensuring sufficient interaction between particles to form short-range ordered arrays during the mixing and shearing process and thus generating non-iridescent colors. The strong and broad uniform light absorption capabilities of polydopamine (PDA) not only suppress the incoherent multiple scattering of the photonic inks, but also impart surprising optical anti-counterfeiting properties, i.e. black color under ambient illumination and dazzling reflective coloration under strong illumination. With the 3D printing technique, complicated angle-independent patterns with visualization and high fidelity are expected to be fabricated with the as-prepared photonic inks for real-life applications in smart anti-counterfeiting labels, thus encoding encrypted information and selective color rendering accessories.

Construction of Steady Amorphous Colloidal Array Patterns via Infiltration-Driven Assembly of Core-Shell Microparticles followed by Short-Time Heating

Although core-shell microparticles with a hard core and soft shell are often used to fabricate photonic crystal films, they are rarely applied to construct steady amorphous colloidal array (ACA) patterns. In this work, a series of monodisperse core-shell microparticles with a polystyrene (PS) core and poly(methyl methacrylate-butyl acrylate) (P(MMA-BA)) shell have been successfully synthesized, and the glass transition temperatures (Tg) of the shell layer have been well regulated. The synthesized core-shell microparticles were then used to fabricate ACA patterns via a convenient infiltration-driven assembly method. The results showed that the Tg of the shell significantly affected the microstructure of the amorphous colloidal arrays (ACAs). During the assembly process, the microparticles quickly contacted each other and the lower-Tg shells could merge with each other to form a continuous film. In this situation, the PS core was embedded and ranked in the P(MMA-BA) film, and both the refractive index contrast and order degree of the colloidal array became relatively low, resulting in a poor structural color. However, when the Tg of the shell layer was moderately high, a short-range ordered array was prepared via infiltration-driven assembly, thereby displaying a bright structural color. More importantly, the shell layers could merge with each other to some extent after short-time heating, resulting in fine mechanical stability. In brief, this study provides a facile and environmental approach to construct steady ACA patterns, which is promising in printing and painting industries.

Stimulus-responsive nonclose-packed photonic crystals: fabrications and applications

Stimulus-responsive photonic crystals (PCs) possessing unconventional nonclosely packed structures have received growing attention due to their unique capability of mimicking the active structural colors of natural organisms (for example, chameleons' mechanochromic properties). However, there is rarely any systematic review regarding the progress of nonclose-packed photonic crystals (NPCs), involving their fabrication, working mechanisms, and applications. Herein, a comprehensive review of the fundamental principles and practical fabrication strategies of one/two/three-dimensional NPCs is summarized from the perspective of designing nonclose-packed structures. Subsequently, responsive NPCs with exciting functions and working mechanisms are sorted and delineated according to their diverse responses to physical (force, temperature, magnetic, and electric fields), chemical (ions, pH, vapors, and solvents), and biological (glucose, organophosphate, creatinine, and bacteria) stimuli. We then systematically introduced and discussed the applications of NPCs in sensors, printing, anticounterfeiting, display, optical devices, etc. Finally, the current challenges and development prospects for NPCs are presented. This review not only concludes the design principle for NPCs but also provides a significant basis for the exploration of next-generation NPCs.

A Photopatternable Conjugated Polymer with Thermal-Annealing-Promoted Interchain Stacking for Highly Stable Anti-Counterfeiting Materials

Photoresponsive polymers can be conveniently used to fabricate anti-counterfeiting materials through photopatterning. However, an unsolved problem is that ambient light and heat can damage anti-counterfeiting patterns on photoresponsive polymers. Herein, photo- and thermostable anti-counterfeiting materials are developed by photopatterning and thermal annealing of a photoresponsive conjugated polymer (MC-Azo). MC-Azo contains alternating azobenzene and fluorene units in the polymer backbone. To prepare an anti-counterfeiting material, an MC-Azo film is irradiated with polarized blue light through a photomask, and then thermally annealed under the pressure of a photonic stamp. This strategy generates a highly secure anti-counterfeiting material with dual patterns, which is stable to sunlight and heat over 200 °C. A key for the stability is that thermal annealing promotes interchain stacking, which converts photoresponsive MC-Azo to a photostable material. Another key for the stability is that the conjugated structure endows MC-Azo with desirable thermal properties. This study shows that the design of photopatternable conjugated polymers with thermal-annealing-promoted interchain stacking provides a new strategy for the development of highly stable and secure anti-counterfeiting materials.

pH- and temperature-responsive supramolecular assemblies with highly adjustable viscoelasticity: a multi-stimuli binary system

Stimuli-responsive materials are increasingly needed for the development of smart electronic, mechanical, and biological devices and systems relying on switchable, tunable, and adaptable properties. Herein, we report a novel pH- and temperature-responsive binary supramolecular assembly involving a long-chain hydroxyamino amide (HAA) and an inorganic hydrotrope, boric acid, with highly tunable viscous and viscoelastic properties. The system under investigation demonstrates a high degree of control over its viscosity, with the capacity to achieve over four orders of magnitude of control through the concomitant manipulation of pH and temperature. In addition, the transformation from non-Maxwellian to Maxwellian fluid behavior could also be induced by changing the pH and temperature. Switchable rheological properties were ascribed to the morphological transformation between spherical vesicles, aggregated/fused spherical vesicles, and bicontinuous gyroid structures revealed by cryo-TEM studies. The observed transitions are attributed to the modulation of the head group spacing between HAA molecules under different pH conditions. Specifically, acidic conditions induce electrostatic repulsion between the protonated amino head groups, leading to an increased spacing. Conversely, under basic conditions, the HAA head group spacing is reduced due to the intercalation of tetrahydroxyborate, facilitated by hydrogen bonding.

Heterogeneous Self-Assembly of a Single Type of Nanoparticle Modulated by Skin Formation

Self-assembly of colloidal nanoparticles has generated tremendous interest due to its widespread applications in structural colorations, sensors, and optoelectronics. Despite numerous strategies being developed to fabricate sophisticated structures, the heterogeneous self-assembly of a single type of nanoparticle in one step remains challenging. Here, facilitated by spatial confinement induced by a skin layer in a drying droplet, we achieve the heterogeneous self-assembly of a single type of nanoparticle by quickly evaporating a colloid-poly (ethylene glycol) (PEG) droplet. During the drying process, a skin layer forms at the droplet surface. The resultant spatial confinement assembles nanoparticles into face-centered-cubic (FCC) lattices with (111) and (100) plane orientations, generating binary bandgaps and two structural colors. The self-assembly of nanoparticles can be regulated by varying the PEG concentration so that FCC lattices with homo- or heterogeneous orientation planes can be prepared on demand. Besides, the approach is applicable for diverse droplet shapes, various substrates, and different nanoparticles. The one-pot general strategy breaks the requirements for multiple types of building blocks and predesigned substrates, extending the fundamental understanding underlying colloidal self-assembly.

Crack-Free Structural Color Materials Prepared without Disrupting the Particle Arrangement by Controlling the Internal Stress Relaxation and Interactions of the Melanin Particles

In fabricating structural color materials with assembled colloidal particles, there is a trade-off between the internal stresses acting on the particles and the interactions between the particles during solvent volatilization. It is crucial to fabricate crack-free materials that maintain the periodic arrangements of the particles by understanding the mechanism for crack initiation. Here, we focused on the composition and additives of melanin particle dispersions to obtain crack-free structural color materials without disturbing the particle arrangements. The use of a water/ethanol mixture as a dispersant effectively reduced the internal stresses of the particles during solvent evaporation. Furthermore, the addition of low-molecular-weight, low-volatility ionic liquids ensured that the arrangement and interactions of the particles were maintained after solvent volatilization. Optimization of the composition and additives of the dispersion made it possible to achieve crack-free melanin-based structural color materials while maintaining vivid, angular-dependent color tones.

Direct ink writing 3D-printed optical waveguides for multi-layer interconnect

Low-cost, short-range optical interconnect technology plays an indispensable role in high-speed board-level data communications. In general, 3D printing technology can easily and quickly produce optical components with free-form shapes, while the traditional manufacturing process is complicated and time-consuming. Here, we present a direct ink writing 3D-printing technology to fabricate optical waveguides for optical interconnects. The waveguide core is 3D printed optical polymethylmethacrylate (PMMA) polymer, with propagation loss of 0.21 dB/cm at 980 nm, 0.42 dB/cm at 1310 nm, and 1.08 dB/cm at 1550 nm, respectively. Furthermore, a high-density multilayer waveguide arrays, including a four-layer waveguide arrays with a total of 144 waveguide channels, is demonstrated. Error-free data transmission at 30 Gb/s is achieved for each waveguide channel, indicating that the printing method can produce optical waveguides with excellent optical transmission performance. We believe this simple, low-cost, highly flexible, and environmentally friendly method has great potential for high-speed short-range optical interconnects.

Rotary Structural Color Spindles from Droplet Confined Magnetic Self-Assembly

Structural colors materials are profoundly explored owing to their fantastic optical properties and widespread applications. Development of structural color materials bearing flexible morphologies and versatile functionalities is highly anticipated. Here, a droplet-confined, magnetic-induced self-assembly strategy for generating rotary structural color spindles (SCSPs) by fast solvent extraction is proposed. The as-prepared SCSPs exhibit an orderly close-packed lattice structure, thus appearing brilliant structural colors that serve as encoding tags for multiplexed bioassays. Besides, benefitting from the abundant specific surface area, biomarkers can be labeled on the SCSPs with high efficiency for specific detection of analytes in clinical samples. Moreover, the directional magnetic moment arrangement enables contactless magnetic manipulation of the SCSPs, and the resultant rotary motions of the SCSPs generates turbulence in the detection solution, thus significantly improving the detection efficiency and shortening the detection time. Based on these merits, a portable point-of-care-testing strip integrating the rotary SCSPs is further constructed and the capability and advantages of this platform for multiplexed detection of tumor-related exosomes in clinical samples are demonstrated. This study offers a new way for the control of bottom-up self-assembly and extends the configuration and application values of colloidal crystal structural colors materials.

Printing Crack-Free Microporous Structures by Combining Additive Manufacturing with Colloidal Assembly

To date high printing resolution and scalability, i.e., macroscale component dimensions and fast printing, are incompatible characteristics for additive manufacturing (AM) processes. It is hereby demonstrated that the combination of direct writing as an AM process with colloidal assembly enables the breaching of this processing barrier. By tailoring printing parameters for polystyrene (PS) microparticle-templates, how to avoid coffee ring formation is demonstrated, thus printing uniform single lines and macroscale areas. Moreover, a novel "comb"-strategy is introduced to print macroscale, crack-free colloidal coatings with low viscous colloidal suspensions. The printed templates are transformed into ceramic microporous channels as well as photonic coatings via atomic layer deposition (ALD) and calcination. The obtained structures reveal promising wicking capabilities and broadband reflection in the near-infrared, respectively. This work provides guidelines for printing low viscous colloidal suspensions and highlights the advancements that this printing process offers toward novel applications of colloidal-based printed structures.

Recent Advances in Printable Flexible Optical Devices: From Printing Technology and Optimization Strategies to Perspectives

Recently, flexible optical devices have triggered booming developments in various research fields, including display equipment, sensors, energy conversion, and so on, due to their high compatibility, portability, and wearability. With the advantages of strong design ability, high precision, and high integration, printing technologies have been recognized as promising methods to realize flexible optical devices. In this Perspective, recent progress on printing strategies for fabricating flexible optical devices are introduced systematically. First, through adjusting the composition of inks, selecting flexible substrates, and controlling external stimulation, fabrication of flexible optical devices based on inkjet printing is illustrated. Then, flexible optical devices fabricated by template-induced printing, 3D printing, slot-die printing, and screen printing are summarized. Finally, prospects and future development directions based on printing technology for flexible optical devices are proposed.

An angle-compensating colorimetric strain sensor with wide working range and its fabrication method

The visual response is one of the most intuitive principles of sensors. Therefore, emission and change of the colors are widely studied for development of chemical, thermal and mechanical sensors. And it is still a challenging issue to fabricate them with a simple working mechanism, high sensitivity, good reliability, and a cost-effective fabrication process. In this study, we propose a mechanical strain sensor, which has 2D photonic crystal structures in nanoscale on stretchable polydimethylsiloxane (PDMS) substrate. Due to the periodic nanostructures, the surface of the sensor produces structural colors. And when it is stretched, the periodicity of the nanostructures changes, which results in the shift of the colors. Multiple nanostructures with different periodicities are integrated on the sensor in order to extend the working range up to 150% with high sensitivity. In addition, reusable and robust molds, which are fabricated by self-assembly of nanoparticles, are used for multiple replications of sensor substrates. Thus, the fabrication process of this study is believed to be potential for possible industrial manufacturing. This study is expected to contribute to strain sensors in the future for the applications of health care, infrastructure monitoring, soft robotics, and wearable devices.

Structural Color Ionic Hydrogel Patches for Wound Management

Ionic hydrogels have attracted extensive attention because of their wide applicability in electronic skins, biosensors, and other biomedical areas. Tremendous effort is dedicated to developing ionic hydrogels with improved detection accuracy and multifunctionality. Herein, we present an inverse opal scaffold-based structural color ionic hydrogel with the desired features as intelligent patches for wound management. The patches were composed of a polyacrylamide-poly(vinyl alcohol)-polyethylenimine-lithium chloride (PAM-PVA-PEI-LiCl) inverse opal scaffold and a vascular endothelial growth factor (VEGF) mixed methacrylated gelatin (GelMA) hydrogel filler surface. The scaffold imparted the composite patches with brilliant structural color, conductive property, and freezing resistance, while the VEGF-GelMA surface could not only prevent the ionic hydrogel from the interference of complex wound conditions but also contribute to the cell proliferation and tissue repair in the wounds. Thus, the hydrogel patches could serve as electronic skins for in vivo wound healing and monitoring with high accuracy and reliability. These features indicate that the proposed structural color ionic hydrogel patches have great potential for clinical applications.

Bioinspired Colloidal Photonic Composites: Fabrications and Emerging Applications

Organisms in nature have evolved unique structural colors and stimuli-responsive functions for camouflage, warning, and communication over millions of years, which are essential to their survival in harsh conditions. Inspired by these characteristics, colloidal photonic composites (CPCs) composed of colloidal photonic crystals embedded in the polymeric matrix are artificially prepared and show great promise in applications. This review focuses on the summary of building blocks, i.e., colloidal particles and polymeric matrices, and constructive strategies from the perspective of designing CPCs with robust performance and specific functionality. Furthermore, their state-of-the-art applications are also discussed, including colorful coatings, anti-counterfeiting, and regulation of photoluminescence, especially in the field of visualized sensing. Finally, current challenges and potential for future developments in this field are discussed. The purpose of this review is not only to clarify the design principle for artificial CPCs but also to serve as a roadmap for the exploration of next-generation photonic materials.

Continuous resin refilling and hydrogen bond synergistically assisted 3D structural color printing

3D photonic crystals (PCs) have attracted extensive attention due to their unique optical properties. However, fabricating 3D PCs structure by 3D printing colloidal particles is limited by control of assembly under a fast-printing speed. Here, we employ continuous digital light processing (DLP) 3D printing strategy with hydrogen bonds assisted colloidal inks for fabricating well-assembled 3D PCs structures. Stable dispersion of colloidal particles inside UV-curable system induced by hydrogen bonding and suction force induced by continuous curing manner cooperatively realize the simultaneous macroscopic printing and microscopic particle assembly, which endows volumetric color property. Structural color can be well regulated by controlling the particle diameter and printing speed, through which various complex 3D structures with desired structural color distribution and optical light-guide properties are acquired. This 3D color construction approach shows great potential in customized jewelry accessories, decoration and optical device preparation, and will innovate the development of structural color.

Designing photonic microparticles with droplet microfluidics

Photonic materials with a periodic change of refractive index show unique optical properties through wavelength-selective diffraction and modulation of the optical density of state, which is promising for various optical applications. In particular, photonic structures have been produced in the format of microparticles using emulsion templates to achieve advanced properties and applications beyond those of a conventional film format. Photonic microparticles can be used as a building block to construct macroscopic photonic materials, and the individual microparticles can serve as miniaturized photonic devices. Droplet microfluidics enables the production of emulsion drops with a controlled size, composition, and configuration that serve as the optimal confining geometry for designing photonic microparticles. This feature article reviews the recent progress and current state of the art in the field of photonic microparticles, covering all aspects of microfluidic production methods, microparticle geometries, optical properties, and applications. Two distinct bottom-up approaches based on colloidal assembly and liquid crystals are, respectively, discussed and compared.