Advances in magnetic microscopy

Research on Micro-Displacement Measurement Accuracy Enhancement Method Based on Ensemble NV Color Center

This paper builds a corresponding micro-displacement test system based on an ensemble nitrogen-vacancy (NV) color center magnetometer by combining the correlation between a magnetic flux concentrator, a permanent magnet, and micro-displacement. By comparing the measurement results obtained with and without the magnetic flux concentrator, it can be seen that the resolution of the system under the magnetic flux concentrator can reach 25 nm, which is 24 times higher than without the magnetic flux concentrator. The effectiveness of the method is proven. The above results provide a practical reference for high-precision micro-displacement detection based on the diamond ensemble.

Addressing the Silent Spread of Monkeypox Disease with Advanced Analytical Tools

Monkeypox disease is caused by a virus which belongs to the orthopoxvirus genus of the poxviridae family. This disease has recently spread out to several non-endemic countries. While some cases have been linked to travel from endemic regions, more recent infections are thought to have spread in the community without any travel links, raising the risks of a wider outbreak. This state of public health represents a highly unusual event which requires urgent surveillance. In this context, the opportunities and technological challenges of current bio/chemical sensors, nanomaterials, nanomaterial characterization instruments, and artificially intelligent biosystems collectively called "advanced analytical tools" are reviewed here, which will allow early detection, characterization, and inhibition of the monkeypox virus (MPXV) in the community and limit its expansion from endemic to pandemic. A summary of background information is also provided from biological and epidemiological perspective of monkeypox to support the scientific case for its holistic management using advanced analytical tools.

Long-distance polarizing microscope system combined with solenoid-type magnet for microscopy and simultaneous measurement of physical parameters

We have developed a long-distance polarizing microscope system combined with a solenoid-type superconducting magnet. By inserting an infinity-corrected objective lens into the magnet, direct or polarizing microscope images are observed in magnetic fields of up to 12 T at various temperatures down to 2 K. Through magneto-optical measurements in the transmission geometry, the local magnetization process of a transparent magnet is evaluated in areas of 10 × 10 µm². This system enables simultaneous measurements of other physical properties over a wide range of temperatures and magnetic fields. The basic principle of the proposed long-distance microscopy can be applied to imaging experiments in various research fields, particularly biology and chemistry.

Scanning gradiometry with a single spin quantum magnetometer

Quantum sensors based on spin defects in diamond have recently enabled detailed imaging of nanoscale magnetic patterns, such as chiral spin textures, two-dimensional ferromagnets, or superconducting vortices, based on a measurement of the static magnetic stray field. Here, we demonstrate a gradiometry technique that significantly enhances the measurement sensitivity of such static fields, leading to new opportunities in the imaging of weakly magnetic systems. Our method relies on the mechanical oscillation of a single nitrogen-vacancy center at the tip of a scanning diamond probe, which up-converts the local spatial gradients into ac magnetic fields enabling the use of sensitive ac quantum protocols. We show that gradiometry provides important advantages over static field imaging: (i) an order-of-magnitude better sensitivity, (ii) a more localized and sharper image, and (iii) a strong suppression of field drifts. We demonstrate the capabilities of gradiometry by imaging the nanotesla fields appearing above topographic defects and atomic steps in an antiferromagnet, direct currents in a graphene device, and para- and diamagnetic metals.

Enhancing sensitivity in atomic force microscopy for planar tip-on-chip probes

We present a new approach to tuning-fork-based atomic force microscopy for utilizing advanced "tip-on-chip" probes with high sensitivity and broad compatibility. Usually, such chip-like probes with a size reaching 2 × 2 mm² drastically perturb the oscillation of the tuning fork, resulting in poor performance in its intrinsic force sensing. Therefore, restoring initial oscillatory characteristics is necessary for regaining high sensitivity. To this end, we developed a new approach consisting of three basic steps: tuning-fork rebalancing, revamping holder-sensor fixation, and electrode reconfiguration. Mass rebalancing allows the tuning fork to recover the frequency and regain high Q-factor values up to 10⁴ in air and up to 4 × 10⁴ in ultra-high vacuum conditions. The floating-like holder-fixation using soft wires significantly reduces energy dissipation from the mounting elements. Combined with the soft wires, reconfigured electrodes provide electrical access to the chip-like probe without intervening in the force-sensing signal. Finally, our easy-to-implement approach allows converting the atomic force microscopy tip from a passive tool to a dedicated microdevice with extended functionality.

Nanoscale Magnetization and Current Imaging Using Time-Resolved Scanning-Probe Magnetothermal Microscopy

Magnetic microscopy that combines nanoscale spatial resolution with picosecond scale temporal resolution uniquely enables direct observation of the spatiotemporal magnetic phenomena that are relevant to future high-speed, high-density magnetic storage and logic technologies. Magnetic microscopes that combine these metrics has been limited to facility-level instruments. To address this gap in lab-accessible spatiotemporal imaging, we develop a time-resolved near-field magnetic microscope based on magnetothermal interactions. We demonstrate both magnetization and current density imaging modalities, each with spatial resolution that far surpasses the optical diffraction limit. In addition, we study the near-field and time-resolved characteristics of our signal and find that our instrument possesses a spatial resolution on the scale of 100 nm and a temporal resolution below 100 ps. Our results demonstrate an accessible and comparatively low-cost approach to nanoscale spatiotemporal magnetic microscopy in a table-top form to aid the science and technology of dynamic magnetic devices with complex spin textures.

Retroreflection and diffraction of a Bose-Einstein condensate by evanescent standing wave potential

The characteristic of the angular distributions of accelerated Bose-Einstein condensate (BEC) atoms incidence on the surface is designed using the mathematical modeling method. Here, we proposed the idea to study retroreflection and diffraction of a BEC from an evanescent standing wave potential (ESWP). The ESWP is formed by multiple reflections of the laser beam from the surface of the prism under the influence of gravity. After BEC's reflection and diffraction, the so-called BEC's density rainbow patterns develop due to the interference which depends on the surface structure which we model with the periodic decaying evanescent field. The interaction of accelerated bosonic atoms with a surface can help to demonstrate surface structures or to determine surface roughness, or to build future high spatial resolution and high sensitivity magnetic-field sensors in two-dimensional systems.

Opportunities and Challenges for Biosensors and Nanoscale Analytical Tools for Pandemics: COVID-19

Biosensors and nanoscale analytical tools have shown huge growth in literature in the past 20 years, with a large number of reports on the topic of 'ultrasensitive', 'cost-effective', and 'early detection' tools with a potential of 'mass-production' cited on the web of science. Yet none of these tools are commercially available in the market or practically viable for mass production and use in pandemic diseases such as coronavirus disease 2019 (COVID-19). In this context, we review the technological challenges and opportunities of current bio/chemical sensors and analytical tools by critically analyzing the bottlenecks which have hindered the implementation of advanced sensing technologies in pandemic diseases. We also describe in brief COVID-19 by comparing it with other pandemic strains such as that of severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS) for the identification of features that enable biosensing. Moreover, we discuss visualization and characterization tools that can potentially be used not only for sensing applications but also to assist in speeding up the drug discovery and vaccine development process. Furthermore, we discuss the emerging monitoring mechanism, namely wastewater-based epidemiology, for early warning of the outbreak, focusing on sensors for rapid and on-site analysis of SARS-CoV2 in sewage. To conclude, we provide holistic insights into challenges associated with the quick translation of sensing technologies, policies, ethical issues, technology adoption, and an overall outlook of the role of the sensing technologies in pandemics.

Parallel Aligned Nickel Nanocone Arrays for Multiband Microwave Absorption

Magnetic nanostructures with conical shape are highly desired for pursuing extraordinary magnetic properties and microwave absorption. However, the fabrication of such nanostructures with controlled shape and size uniformities and alignment is not yet realized. Accordingly, the magnetic properties and their application as microwave absorber are not well understood. Here, we report on the first demonstration of controlled fabrication of soft magnetic nickel nanocone arrays with sharp geometry, large aspect ratio, uniform size, and parallel alignment. The imaginary part of the relative complex permeability shows multiband absorption in the 2-17 GHz range. Such an exceptional microwave absorption results from the uniform conical shape and size and the parallel alignment. The absorption mechanisms are discussed under the framework of natural resonance and exchange resonance. The natural resonance is dependent on the shape anisotropy and facilitated by the conical geometry. The exchange resonance is well explained by the observation of the bulk spin waves with exchange coupling at the tip of nanocones using the inelastic light scattering and is consistent with exchange theory predictions for the quantization of bulk spin waves. We expect that our work will shed light on the physical insights into the magnetic properties of nanocones and find great potential in applications of microwave absorption.

Spin-polarised electrons in a one-magnet-only Mott spin junction

The current flowing through a Mott spin junction depends on the relative spin orientation of the two ferromagnetic layers comprising the "source" and "drain" sides of the junction. The resulting current asymmetry is detected as giant or tunnelling magnetoresistance depending on whether the two ferromagnets are separated by a metal or an insulator. Based on the fundamental principles of reciprocity for spin-dependent electron scattering, one can envisage a one-magnet-only spin junction in which the source is non-magnetic, and the spin information is encoded by the spin polarisation of the electrons that have crossed or are backscattered from the drain magnetic layer. The practical significance of using an unpolarised source is that the state of the magnetic layer can be modified without affecting the process of probing it. Whether this reciprocity is realised in the actual junctions is not yet known. Here, we demonstrate a nano-sized, one-magnet-only Mott spin junction by measuring the finite spin polarisation of the backscattered electrons. Based on this finding, we conclude that since the junction acts as a spin filter, the magnetic layer must experience a spin transfer that could become detectable in view of the high current densities achievable in this technology.

Sub-nanometer Resolution Imaging with Amplitude-modulation Atomic Force Microscopy in Liquid

Atomic force microscopy (AFM) has become a well-established technique for nanoscale imaging of samples in air and in liquid. Recent studies have shown that when operated in amplitude-modulation (tapping) mode, atomic or molecular-level resolution images can be achieved over a wide range of soft and hard samples in liquid. In these situations, small oscillation amplitudes (SAM-AFM) enhance the resolution by exploiting the solvated liquid at the surface of the sample. Although the technique has been successfully applied across fields as diverse as materials science, biology and biophysics and surface chemistry, obtaining high-resolution images in liquid can still remain challenging for novice users. This is partly due to the large number of variables to control and optimize such as the choice of cantilever, the sample preparation, and the correct manipulation of the imaging parameters. Here, we present a protocol for achieving high-resolution images of hard and soft samples in fluid using SAM-AFM on a commercial instrument. Our goal is to provide a step-by-step practical guide to achieving high-resolution images, including the cleaning and preparation of the apparatus and the sample, the choice of cantilever and optimization of the imaging parameters. For each step, we explain the scientific rationale behind our choices to facilitate the adaptation of the methodology to every user's specific system.

Measuring spectroscopy and magnetism of extracted and intracellular magnetosomes using soft X-ray ptychography

Characterizing the chemistry and magnetism of magnetotactic bacteria (MTB) is an important aspect of understanding the biomineralization mechanism and function of the chains of magnetosomes (Fe₃O₄ nanoparticles) found in such species. Images and X-ray absorption spectra (XAS) of magnetosomes extracted from, and magnetosomes in, whole Magnetovibrio blakemorei strain MV-1 cells have been recorded using soft X-ray ptychography at the Fe 2p edge. A spatial resolution of 7 nm is demonstrated. Precursor-like and immature magnetosome phases in a whole MV-1 cell were visualized, and their Fe 2p spectra were measured. Based on these results, a model for the pathway of magnetosome biomineralization for MV-1 is proposed. Fe 2p X-ray magnetic circular dichroism (XMCD) spectra have been derived from ptychography image sequences recorded using left and right circular polarization. The shape of the XAS and XMCD signals in the ptychographic absorption spectra of both sample types is identical to the shape and signals measured with conventional bright-field scanning transmission X-ray microscope. A weaker and inverted XMCD signal was observed in the ptychographic phase spectra of the extracted magnetosomes. The XMCD ptychographic phase spectrum of the intracellular magnetosomes differed from the ptychographic phase spectrum of the extracted magnetosomes. These results demonstrate that spectro-ptychography offers a superior means of characterizing the chemical and magnetic properties of MTB at the individual magnetosome level.

Magneto-optical micromechanical systems for magnetic field mapping

A new method for magnetic field mapping based on the optical response of organized dense arrays of flexible magnetic cantilevers is explored. When subjected to the stray field of a magnetized material, the mobile parts of the cantilevers deviate from their initial positions, which locally changes the light reflectivity on the magneto-optical surface, thus allowing to visualize the field lines. While the final goal is to be able to map and quantify non-uniform fields, calibrating and testing the device can be done with uniform fields. Under a uniform field, the device can be assimilated to a magnetic-field-sensitive diffraction grating, and therefore, can be analyzed by coherent light diffraction. A theoretical model for the diffraction patterns, which accounts for both magnetic and mechanical interactions within each cantilever, is proposed and confronted to the experimental data.

Magneto-optical imaging of thin magnetic films using spins in diamond

Imaging the fields of magnetic materials provides crucial insight into the physical and chemical processes surrounding magnetism, and has been a key ingredient in the spectacular development of magnetic data storage. Existing approaches using the magneto-optic Kerr effect, x-ray and electron microscopy have limitations that constrain further development, and there is increasing demand for imaging and characterisation of magnetic phenomena in real time with high spatial resolution. Here we show how the magneto-optical response of an array of negatively-charged nitrogen-vacancy spins in diamond can be used to image and map the sub-micron stray magnetic field patterns from thin ferromagnetic films. Using optically detected magnetic resonance, we demonstrate wide-field magnetic imaging over 100 × 100 μm² with sub-micron spatial resolution at video frame rates, under ambient conditions. We demonstrate an all-optical spin relaxation contrast imaging approach which can image magnetic structures in the absence of an applied microwave field. Straightforward extensions promise imaging with sub-μT sensitivity and sub-optical spatial and millisecond temporal resolution. This work establishes practical diamond-based wide-field microscopy for rapid high-sensitivity characterisation and imaging of magnetic samples, with the capability for investigating magnetic phenomena such as domain wall and skyrmion dynamics and the spin Hall effect in metals.

Quantitatively probing the magnetic behavior of individual nanoparticles by an AC field-modulated magnetic force microscopy

Despite decades of advances in magnetic imaging, obtaining direct, quantitative information with nanometer scale spatial resolution remains an outstanding challenge. Current approaches, for example, Hall micromagnetometer and nitrogen-vacancy magnetometer, are limited by highly complex experimental apparatus and a dedicated sample preparation process. Here we present a new AC field-modulated magnetic force microscopy (MFM) and report the local and quantitative measurements of the magnetic information of individual magnetic nanoparticles (MNPs), which is one of the most iconic objects of nanomagnetism. This technique provides simultaneously a direct visualization of the magnetization process of the individual MNPs, with spatial resolution and magnetic sensitivity of about 4.8 nm and 1.85 × 10⁻²⁰ A m², respectively, enabling us to separately estimate the distributions of the dipolar fields and the local switching fields of individual MNPs. Moreover, we demonstrate that quantitative magnetization moment of individual MNPs can be routinely obtained using MFM signals. Therefore, it underscores the power of the AC field-modulated MFM for biological and biomedical applications of MNPs and opens up the possibility for directly and quantitatively probing the weak magnetic stray fields from nanoscale magnetic systems with superior spatial resolution.

Magnetic ordering induced giant optical property change in tetragonal BiFeO3

Magnetic ordering could have significant influence on band structures, spin-dependent transport, and other important properties of materials. Its measurement, especially for the case of antiferromagnetic (AFM) ordering, however, is generally difficult to be achieved. Here we demonstrate the feasibility of magnetic ordering detection using a noncontact and nondestructive optical method. Taking the tetragonal BiFeO3 (BFO) as an example and combining density functional theory calculations with tight-binding models, we find that when BFO changes from C1-type to G-type AFM phase, the top of valance band shifts from the Z point to Γ point, which makes the original direct band gap become indirect. This can be explained by Slater-Koster parameters using the Harrison approach. The impact of magnetic ordering on band dispersion dramatically changes the optical properties. For the linear ones, the energy shift of the optical band gap could be as large as 0.4 eV. As for the nonlinear ones, the change is even larger. The second-harmonic generation coefficient d33 of G-AFM becomes more than 13 times smaller than that of C1-AFM case. Finally, we propose a practical way to distinguish the two AFM phases of BFO using the optical method, which is of great importance in next-generation information storage technologies.

Towards a table-top microscope for nanoscale magnetic imaging using picosecond thermal gradients

Research advancement in magnetoelectronics is challenged by the lack of a table-top magnetic measurement technique with the simultaneous temporal and spatial resolution necessary for characterizing magnetization dynamics in devices of interest, such as magnetic memory and spin torque oscillators. Although magneto-optical microscopy provides superb temporal resolution, its spatial resolution is fundamentally limited by optical diffraction. To address this challenge, we study heat rather than light as a vehicle to stroboscopically transduce a local magnetic moment into an electrical signal while retaining picosecond temporal resolution. Using this concept, we demonstrate spatiotemporal magnetic microscopy using the time-resolved anomalous Nernst effect (TRANE). Experimentally and with supporting numerical calculations, we find that TRANE microscopy has temporal resolution below 30 ps and spatial resolution determined by the area of thermal excitation. Based on these findings, we suggest a route to exceed the limits imposed by far-field optical diffraction.

The impact of structural relaxation on spin polarization and magnetization reversal of individual nano structures studied by spin-polarized scanning tunneling microscopy

The application of low temperature spin-polarized scanning tunneling microscopy and spectroscopy in magnetic fields for the quantitative characterization of spin polarization, magnetization reversal and magnetic anisotropy of individual nano structures is reviewed. We find that structural relaxation, spin polarization and magnetic anisotropy vary on the nm scale near the border of a bilayer Co island on Cu(1 1 1). This relaxation is lifted by perimetric decoration with Fe. We discuss the role of spatial variations of the spin-dependent electronic properties within and at the edge of a single nano structure for its magnetic properties.

Research progress on electronic phase separation in low-dimensional perovskite manganite nanostructures

Perovskite oxide manganites with a general formula of R1-x AxMnO3 (where R is a trivalent rare-earth element such as La, Pr, Sm, and A is a divalent alkaline-earth element such as Ca, Sr, and Ba) have received much attention due to their unusual electron-transport and magnetic properties, which are indispensable for applications in microelectronic, magnetic, and spintronic devices. Recent advances in the science and technology have resulted in the feature sizes of microelectronic devices based on perovskite manganite oxides down-scaling into nanoscale dimensions. At the nanoscale, low-dimensional perovskite manganite oxide nanostructures display novel physical properties that are different from their bulk and film counterparts. Recently, there is strong experimental evidence to indicate that the low-dimensional perovskite manganite oxide nanostructures are electronically inhomogeneous, consisting of different spatial regions with different electronic orders, a phenomenon that is named as electronic phase separation (EPS). As the geometry sizes of the low-dimensional manganite nanostructures are reduced to the characteristic EPS length scale (typically several tens of nanometers in manganites), the EPS is expected to be strongly modulated, leading to quite dramatic changes in functionality and more emergent phenomena. Therefore, reduced dimensionality opens a door to the new functionalities in perovskite manganite oxides and offers a way to gain new insight into the nature of EPS. During the past few years, much progress has been made in understanding the physical nature of the EPS in low-dimensional perovskite manganite nanostructures both from experimentalists and theorists, which have a profound impact on the oxide nanoelectronics. This nanoreview covers the research progresses of the EPS in low-dimensional perovskite manganite nanostructures such as nanoparticles, nanowires/nanotubes, and nanostructured films and/or patterns. The possible physical origins of the EPS are also discussed from the signatures of electronic inhomogeneities as well as some theoretical scenarios, to shed light on understanding this phenomenon. Finally, the perspectives to the future researches in this area are also outlined.

Magnetometry with nitrogen-vacancy defects in diamond

The isolated electronic spin system of the nitrogen-vacancy (NV) centre in diamond offers unique possibilities to be employed as a nanoscale sensor for detection and imaging of weak magnetic fields. Magnetic imaging with nanometric resolution and field detection capabilities in the nanotesla range are enabled by the atomic-size and exceptionally long spin-coherence times of this naturally occurring defect. The exciting perspectives that ensue from these characteristics have triggered vivid experimental activities in the emerging field of 'NV magnetometry'. It is the purpose of this article to review the recent progress in high-sensitivity nanoscale NV magnetometry, generate an overview of the most pertinent results of the last years and highlight perspectives for future developments. We will present the physical principles that allow for magnetic field detection with NV centres and discuss first applications of NV magnetometers that have been demonstrated in the context of nano magnetism, mesoscopic physics and the life sciences.

Topological properties and dynamics of magnetic skyrmions

Magnetic skyrmions are particle-like nanometre-sized spin textures of topological origin found in several magnetic materials, and are characterized by a long lifetime. Skyrmions have been observed both by means of neutron scattering in momentum space and microscopy techniques in real space, and their properties include novel Hall effects, current-driven motion with ultralow current density and multiferroic behaviour. These properties can be understood from a unified viewpoint, namely the emergent electromagnetism associated with the non-coplanar spin structure of skyrmions. From this description, potential applications of skyrmions as information carriers in magnetic information storage and processing devices are envisaged.

High sensitivity piezomagnetic force microscopy for quantitative probing of magnetic materials at the nanoscale

Accurate scanning probing of magnetic materials at the nanoscale is essential for developing and characterizing magnetic nanostructures, yet quantitative analysis is difficult using the state of the art magnetic force microscopy, and has limited spatial resolution and sensitivity. In this communication, we develop a novel piezomagnetic force microscopy (PmFM) technique, with the imaging principle based on the detection of magnetostrictive response excited by an external magnetic field. In combination with the dual AC resonance tracking (DART) technique, the contact stiffness and energy dissipation of the samples can be simultaneously mapped along with the PmFM phase and amplitude, enabling quantitative probing of magnetic materials and structures at the nanoscale with high sensitivity and spatial resolution. PmFM has been applied to probe magnetic soft discs and cobalt ferrite thin films, demonstrating it as a powerful tool for a wide range of magnetic materials.

Nanoscale magnetic characterization of tunneling magnetoresistance spin valve head by electron holography

Nanostructured magnetic materials play an important role in increasing miniaturized devices. For the studies of their magnetic properties and behaviors, nanoscale imaging of magnetic field is indispensible. Here, using electron holography, the magnetization distribution of a TMR spin valve head of commercial design is investigated without and with a magnetic field applied. Characterized is the magnetic flux distribution in complex hetero-nanostructures by averaging the phase images and separating their component magnetic vectors and electric potentials. The magnetic flux densities of the NiFe (shield and 5 nm-free layers) and the CoPt (20 nm-bias layer) are estimated to be 1.0 T and 0.9 T, respectively. The changes in the magnetization distribution of the shield, bias, and free layers are visualized in situ for an applied field of 14 kOe. This study demonstrates the promise of electron holography for characterizing the magnetic properties of hetero-interfaces, nanostructures, and catalysts.

Note: unique characterization possibilities in the ultra high vacuum scanning transmission x-ray microscope (UHV-STXM) "MAXYMUS" using a rotatable permanent magnetic field up to 0.22 T

Using the x-ray magnetic circular dichroism effect, the soft x-ray range provides powerful detection capabilities concerning element specific structural, chemical, and magnetic properties. We present the implementation of a variable 0.22 T magnet system based on permanent magnets into the new UHV scanning microscope "MAXYMUS" at HZB/BESSY II, allowing surface sensitive and simultaneous standard transmission microscopic investigations in a variable external magnetic field. The outstanding potential of these new investigation possibilities will be demonstrated showing the development of the magnetic domain structure concurrently at the surface and in the bulk, providing a profound understanding of fundamental mechanisms in coupled magnetic systems.

Correlation between the magnetic imaging of cobalt nanoconstrictions and their magnetoresistance response

Scanning transmission x-ray microscopy (STXM) and magnetoresistance (MR) measurements are used to investigate the magnetic behavior of a nanoconstriction joining two micrometric electrodes (a pad and a wire). The reversal of the magnetization under variable external static magnetic fields is imaged. By means of a detailed analysis of the STXM images at the nanocontact area, the MR is calculated, based on diffusive anisotropic-MR. This MR agrees well with that obtained from electrical transport measurements, allowing a direct correlation between the MR signal and the magnetic reversal of the system. The magnetization behavior depends on the sample thickness and constriction dimensions. In 40 nm-thick samples, with 20 × 175 nm(2) contact areas, the magnetization at the two sides of the constriction forms a net angle of 90°, with a progressive evolution of the magnetization structure between the electrodes during switching. The MR in those cases has a more peaked shape than with 20 nm-thick electrodes and 10 × 80 nm(2) contact areas, where the magnetization forms 180° between them, with a wide domain wall pinned at the constriction. As a consequence of this configuration, a plateau in the MR is observed for about 20 Oe.

Studies of nanomagnetism using synchrotron-based x-ray photoemission electron microscopy (X-PEEM)

As interest in magnetic devices has increased over the last 20 years, research into nanomagnetism has experienced a corresponding growth. Device applications from magnetic storage to magnetic logic have compelled interest in the influence of geometry and finite size on magnetism and magnetic excitations, in particular where the smallest dimensions reach the important magnetic interaction length scales. The dynamical behavior of nanoscale magnets is an especially important subset of research, as these phenomena are both critical for device physics and profoundly influenced by finite size. At the same time, nanoscale systems offer unique geometries to promote and study model systems, such as magnetic vortices, leading to new fundamental insights into magnetization dynamics. A wide array of experimental and computational techniques have been applied to these problems. Among these, imaging techniques that provide real-space information on the magnetic order are particularly useful. X-ray microscopy offers several advantages over scanning probe or optical techniques, such as high spatial resolution, element specificity and the possibility for high time resolution. Here, we review recent contributions using static and time-resolved x-ray photoemission electron microscopy to nanomagnetism research.

High contrast magnetic and nonmagnetic sample current microscopy for bulk and transparent samples using soft X-rays

The soft X-ray energy range provides important detection capabilities for a wide range of material systems, e.g., the K-edge behavior of biological materials or magnetic contrast imaging at the L2,3- and M4,5-edges, respectively, using the X-ray magnetic circular dichroism effect. The need for thinned samples due to the short penetration depth of soft X-rays is a limiting factor for microscopic imaging in transmission microscopy. In contrast, the more surface sensitive photoelectron emission microscopy allows the X-ray microscopic investigation of nontransparent bulk samples, but only small magnetic fields and very smooth surfaces are possible. As both high magnetic fields as well as bulk samples are important for magnetic imaging, we present total electron yield (TEY) microscopy results using the total sample current detection performed at the new ultra high vacuum scanning microscope "MAXYMUS" at HZB/BESSY II. We compare synchronous measurements in TEY and transmission mode to demonstrate the capabilities of TEY microscopy. Pictures and spectra with high absorption contrast and three-dimensional-like edge enhancement are observed as known for scanning electron microscopy. This unveils details on smallest length scales of the surface morphology. Furthermore, surface sensitive in- and out-of-plane magnetic TEY measurements at nontransparent samples are shown.

Dichroic coherent diffractive imaging

Understanding electronic structure at the nanoscale is crucial to untangling fundamental physics puzzles such as phase separation and emergent behavior in complex magnetic oxides. Probes with the ability to see beyond surfaces on nanometer length and subpicosecond time scales can greatly enhance our understanding of these systems and will undoubtedly impact development of future information technologies. Polarized X-rays are an appealing choice of probe due to their penetrating power, elemental and magnetic specificity, and high spatial resolution. The resolution of traditional X-ray microscopes is limited by the nanometer precision required to fabricate X-ray optics. Here we present a novel approach to lensless imaging of an extended magnetic nanostructure, in which a scanned series of dichroic coherent diffraction patterns is recorded and numerically inverted to map its magnetic domain configuration. Unlike holographic methods, it does not require a reference wave or precision optics. In addition, it enables the imaging of samples with arbitrarily large spatial dimensions, at a spatial resolution limited solely by the coherent X-ray flux, wavelength, and stability of the sample with respect to the beam. It can readily be extended to nonmagnetic systems that exhibit circular or linear dichroism. We demonstrate this approach by imaging ferrimagnetic labyrinthine domains in a Gd/Fe multilayer with perpendicular anisotropy and follow the evolution of the domain structure through part of its magnetization hysteresis loop. This approach is scalable to imaging with diffraction-limited resolution, a prospect rapidly becoming a reality in view of the new generation of phenomenally brilliant X-ray sources.

4D Lorentz electron microscopy imaging: magnetic domain wall nucleation, reversal, and wave velocity

Magnetization reversal is an important topic of research in the fields of both basic and applied ferromagnetism. For the study of magnetization reversal dynamics and magnetic domain wall (DW) motion in ferromagnetic thin films, imaging techniques are indispensable. Here, we report 4D imaging of DWs by the out-of-focus Fresnel method in Lorentz ultrafast electron microscopy (UEM), with in situ spatial and temporal resolutions. The temporal change in magnetization, as revealed by changes in image contrast, is clocked using an impulsive optical field to produce structural deformation of the specimen, thus modulating magnetic field components in the specimen plane. Directly visualized are DW nucleation and subsequent annihilation and oscillatory reappearance (periods of 32 and 45 ns) in nickel films on two different substrates. For the case of Ni films on a Ti/Si(3)N(4) substrate, under conditions of minimum residual external magnetic field, the oscillation is associated with a unique traveling wave train of periodic magnetization reversal. The velocity of DW propagation in this wave train is measured to be 172 m/s with a wavelength of 7.8 microm. The success of this study demonstrates the promise of Lorentz UEM for real-space imaging of spin switching, ferromagnetic resonance, and laser-induced demagnetization in ferromagnetic nanostructures.

Separation of topographic features from magnetic force images using capacitive coupling effect

Separation of topographic features from magnetic images has been an issue for the past two decades in magnetic force microscopy (MFM). The frequent pickups of the topographic features are interpreted as transitions of the tip between bistable states of the tip-sample assembly in the noncontact and tapping regions. MFM using electrostatic force modulation demonstrates the separation of the topographic features from the magnetic images by removing the tapping state from the bistable states through the introduction of a capacitive coupling.

Compact cryogenic Kerr microscope for time-resolved studies of electron spin transport in microstructures

A compact cryogenic Kerr microscope for operation in the small volume of high-field magnets is described. It is suited for measurements both in Voigt and Faraday configurations. Coupled with a pulsed laser source, the microscope is used to measure the time-resolved Kerr rotation response of semiconductor microstructures with approximately 1 mum spatial resolution. The microscope was designed to study spin transport, a critical issue in the field of spintronics. It is thus possible to generate spin polarization at a given location on a microstructure and probe it at a different location. The operation of the microscope is demonstrated by time-resolved measurements of micrometer distance diffusion of spin polarized electrons in a GaAs/AlGaAs heterojunction quantum well at 4.2 K and 7 T.

Benchtop time-resolved magneto-optical Kerr magnetometer

We present here the construction and application of a compact benchtop time-resolved Kerr magnetometer to measure the magnetization precession in magnetic thin films and lithographically patterned elements. As opposed to very expensive femtosecond lasers this system is built upon a picosecond pulsed injection diode laser and electronic pulse and delay generators. The precession is triggered by the electronic pulses of controlled duration and shape, which is launched onto the sample by a microstrip line. We used polarized optical pulses synchronous to the electronic pulses to measure the magneto-optical Kerr rotation. The system is integrated in a conventional upright microscope configuration with separate illumination, imaging, and magneto-optical probe paths. The system offers high stability, relative ease of alignment, sample changing, and a long range of time delay. We demonstrate the measurements of time-resolved dynamics of a Permalloy microwire and microdot using this system, which showed dynamics at two different time scales.

Proximal magnetometry in thin films using betaNMR

Low energy ion implantation of hyperpolarized radioactive magnetic resonance probes allows the NMR study of thin film heterostructures by enabling depth-resolved measurements on a nanometer lengthscale. By stopping the probe ions in a layer adjacent to a layer of interest, it is possible to study magnetic fields proximally. Here we show that, in the simplest case of a uniformly magnetized layer, this yields an unperturbed in situ frequency reference. We also discuss demagnetization contributions to measured shifts for this case. With a simple illustrative calculation, we show how a nonuniformly magnetized layer causes a strongly depth-dependent line broadening in an adjacent layer. We then give some experimental examples of resonance line broadening in heterostructures.

Femtosecond magneto-optical Kerr microscopy

We have developed a magneto-optical Kerr microscope that allows us to measure the ultrafast magnetization dynamics of ferromagnetic nanostructures. The magneto-optical signal can be recorded in a confocal reflection geometry with an accurate selection of the polarization. The magnetization dynamics is obtained from pump-probe measurements using frequency nondegenerate collinear pump and probe beams with a temporal resolution of 180 fs. Both probe and pump beams are focused to their diffraction limit, leading to an overall spatial resolution of 600 nm. The efficiency of the apparatus is tested by investigating the magnetization dynamics of individual CoPt(3) disks with a submicrometer diameter and a thickness of 15 nm.

Application of magnetic force microscopy in nanomaterials characterization

This review describes the basic technical aspects of magnetic force microscopy and how this technique has been applied to the study of colossal magnetoresistance materials, superconductors, and patterned magnetic materials. Recently, current distribution in a patterned aluminum strip has been measured by magnetic force microscopy, opening the possibility of measuring currents in buried interconnects in integrated circuits.

Bose-Einstein condensates: microscopic magnetic-field imaging

Today's magnetic-field sensors are not capable of making measurements with both high spatial resolution and good field sensitivity. For example, magnetic force microscopy allows the investigation of magnetic structures with a spatial resolution in the nanometre range, but with low sensitivity, whereas SQUIDs and atomic magnetometers enable extremely sensitive magnetic-field measurements to be made, but at low resolution. Here we use one-dimensional Bose-Einstein condensates in a microscopic field-imaging technique that combines high spatial resolution (within 3 micrometres) with high field sensitivity (300 picotesla).

Ultrafast dynamics of a ferromagnetic nanocomposite

Ensembles of iron nanocrystals up to 25 nm in diameter embedded in SiO(2) were found to exhibit an ultrafast magnetic response to a transient out-of-plane magnetic field. The response time varies as a function of in-plane bias magnetic field with the fastest rise times, as short as 26 ps, observed for both zero and high bias fields (140 kA/m). Analytical modeling and micromagnetic simulations confirm that magnetostatic interactions between nanoparticles play an important role in the dynamic response.

Spectromicroscope for the PHotoelectron Imaging of Nanostructures with X-rays (SPHINX): performance in biology, medicine and geology

Several X-ray PhotoElectron Emission spectroMicroscopes (X-PEEMs) exist around the world at this time. We present recent performance and resolution tests of one of them, the Spectromicroscope for PHotoelectron Imaging of Nanostructures with X-rays (SPHINX) X-PEEM, installed at the University of Wisconsin Synchrotron Radiation Center. With this state-of-the-art instrument we demonstrate chemical analysis capabilities on conducting and insulating specimens of diverse interests, and an unprecedented lateral resolution of 10 nm with monochromatic X-rays and 7.2 nm with ultraviolet illumination.

Spin-wave quantization in ferromagnetic nickel nanowires

The dynamical properties of uniform two-dimensional arrays of nickel nanowires have been investigated by inelastic light scattering. Multiple spin waves are observed that are in accordance with dipole-exchange theory predictions for the quantization of bulk spin waves. This first study of the spin-wave dynamics in ferromagnetic nanowire arrays reveals strong mode quantization effects and indications of a subtle magnetic interplay between nanowires. The results show that it is important to take proper account of these effects for the fundamental physics and future technological developments of magnetic nanowires.

Spintronics: a spin-based electronics vision for the future

This review describes a new paradigm of electronics based on the spin degree of freedom of the electron. Either adding the spin degree of freedom to conventional charge-based electronic devices or using the spin alone has the potential advantages of nonvolatility, increased data processing speed, decreased electric power consumption, and increased integration densities compared with conventional semiconductor devices. To successfully incorporate spins into existing semiconductor technology, one has to resolve technical issues such as efficient injection, transport, control and manipulation, and detection of spin polarization as well as spin-polarized currents. Recent advances in new materials engineering hold the promise of realizing spintronic devices in the near future. We review the current state of the spin-based devices, efforts in new materials fabrication, issues in spin transport, and optical spin manipulation.