A conformation of cyclosporin A in aqueous environment revealed by the X-ray structure of a cyclosporin-Fab complex

The Influence of Disulfide, Thioacetal and Lanthionine-Bridges on the Conformation of a Macrocyclic Peptide

Cyclisation of peptides by forming thioether (lanthionine), disulfide (cystine) or methylene thioacetal bridges between side chains is established as an important tool to stabilise a given structure, enhance metabolic stability and optimise both potency and selectivity. However, a systematic comparative study of the effects of differing bridging modalities on peptide conformation has not previously been carried out. In this paper, we have used the NMR deconvolution algorithm, NAMFIS, to determine the conformational ensembles, in aqueous solution, of three cyclic analogues of angiotensin(1-7), incorporating either disulfide, or non-reducible thioether or methylene thioacetal bridges. We demonstrate that the major solution conformations are conserved between the different bridged peptides, but the distribution of conformations differs appreciably. This suggests that subtle differences in ring size and bridging structure can be exploited to fine-tune the conformational properties of cyclic peptides, which may modulate their bioactivities.

In Vitro Selection of Macrocyclic l-α/d-α/β/γ-Hybrid Peptides Targeting IFN-γ/IFNGR1 Protein-Protein Interaction

Nonproteinogenic amino acids, including d-α-, β-, and γ-amino acids, present in bioactive peptides play pivotal roles in their biochemical activities and proteolytic stabilities. d-α-Amino acids (dαAA) are widely used building blocks that can enhance the proteolytic stability. Cyclic β2,3-amino acids (cβAA), for instance, can fold peptides into rigid secondary structures, improving the binding affinity and proteolytic stability. Cyclic γ2,4-amino acids (cγAA) are recently highlighted as rigid residues capable of preventing the proteolysis of flanking residues. Simultaneous incorporation of all dαAA, cβAA, and cγAA into a peptide is expected to yield l-α/d-α/β/γ-hybrid peptides with improved stability and potency. Despite challenges in the ribosomal incorporation of multiple nonproteinogenic amino acids, our engineered tRNAPro1E2 successfully reaches such a difficulty. Here, we report the ribosomal synthesis of macrocyclic l-α/d-α/β/γ-hybrid peptide libraries and their application to in vitro selection against interferon gamma receptor 1 (IFNGR1). One of the resulting l-α/d-α/β/γ-hybrid peptides, IB1, exhibited remarkable inhibitory activity against the IFN-γ/IFNGR1 protein-protein interaction (PPI) (IC50 = 12 nM), primarily attributed to the presence of a cβAA in the sequence. Additionally, cγAAs and dαAAs in the resulting peptides contributed to their serum stability. Furthermore, our peptides effectively inhibit IFN-γ/IFNGR1 PPI at the cellular level (best IC50 = 0.75 μM). Altogether, our platform expands the chemical space available for exploring peptides with high activity and stability, thereby enhancing their potential for drug discovery.

Cyclosporin A: Conformational Complexity and Chameleonicity

The chameleonic behavior of cyclosporin A (CsA) was investigated through conformational ensembles employing multicanonical molecular dynamics simulations that could sample the cis and trans isomers of N-methylated amino acids; these assessments were conducted in explicit water, dimethyl sulfoxide, acetonitrile, methanol, chloroform, cyclohexane (CHX), and n-hexane (HEX) using AMBER ff03, AMBER10:EHT, AMBER12:EHT, and AMBER14:EHT force fields. The conformational details were discussed employing the free-energy landscapes (FELs) at T = 300 K; it was observed that the experimentally determined structures of CsA were only a part of the conformational space. Comparing the ROESY measurements in CHX-d12 and HEX-d14, the major conformations in those apolar solvents were essentially the same as that in CDCl₃ except for the observation of some sidechain rotamers. The effects of the metal ions on the conformations, including the cis/trans isomerization, were also investigated. Based on the analysis of FELs, it was concluded that the AMBER ff03 force field best described the experimentally derived conformations, indicating that CsA intrinsically formed membrane-permeable conformations and that the metal ions might be the key to the cis/trans isomerization of N-methylated amino acids before binding a partner protein.

Cyclosporin Structure and Permeability: From A to Z and Beyond

Cyclosporins are natural or synthetic undecapeptides with a wide range of actual and potential pharmaceutical applications. Several members of the cyclosporin compound family have remarkably high passive membrane permeabilities that are not well-described by simple structural metrics. Here we review experimental studies of cyclosporin structure and permeability, including cyclosporin-metal complexes. We also discuss models for the conformation-dependent permeability of cyclosporins and similar compounds. Finally, we identify current knowledge gaps in the literature and provide recommendations regarding future avenues of exploration.

Cyanine Nanocage Activated by Near-IR Light for the Targeted Delivery of Cyclosporine A to Traumatic Brain Injury Sites

More than 2.8 million annually in the United States are afflicted with some form of traumatic brain injury (TBI), where 75% of victims have a mild form of TBI (MTBI). TBI risk is higher for individuals engaging in physical activities or involved in accidents. Although MTBI may not be initially life-threatening, a large number of these victims can develop cognitive and physical dysfunctions. These late clinical sequelae have been attributed to the development of secondary injuries that can occur minutes to days after the initial impact. To minimize brain damage from TBI, it is critical to diagnose and treat patients within the first or "golden" hour after TBI. Although it would be very helpful to quickly determine the TBI locations in the brain and direct the treatment selectively to the affected sites, this remains a challenge. Herein, we disclose our novel strategy to target cyclosporine A (CsA) into TBI sites, without the need to locate the exact location of the TBI lesion. Our approach is based on TBI treatment with a cyanine dye nanocage attached to CsA, a known therapeutic agent for TBI that is associated with unacceptable toxicities. In its caged form, CsA remains inactive, while after near-IR light photoactivation, the resulting fragmentation of the cyanine nanocage leads to the selective release of CsA at the TBI sites.

Impact of non-proteinogenic amino acids in the discovery and development of peptide therapeutics

With the development of modern chemistry and biology, non-proteinogenic amino acids (NPAAs) have become a powerful tool for developing peptide-based drug candidates. Drug-like properties of peptidic medicines, due to the smaller size and simpler structure compared to large proteins, can be changed fundamentally by introducing NPAAs in its sequence. While peptides composed of natural amino acids can be used as drug candidates, the majority have shown to be less stable in biological conditions. The impact of NPAA incorporation can be extremely beneficial in improving the stability, potency, permeability, and bioavailability of peptide-based therapies. Conversely, undesired effects such as toxicity or immunogenicity should also be considered. The impact of NPAAs in the development of peptide-based therapeutics is reviewed in this article. Further, numerous examples of peptides containing NPAAs are presented to highlight the ongoing development in peptide-based therapeutics.

Strategies for Fine-Tuning the Conformations of Cyclic Peptides

Cyclic peptides are promising scaffolds for drug development, attributable in part to their increased conformational order compared to linear peptides. However, when optimizing the target-binding or pharmacokinetic properties of cyclic peptides, it is frequently necessary to "fine-tune" their conformations, e.g., by imposing greater rigidity, by subtly altering certain side chain vectors, or by adjusting the global shape of the macrocycle. This review systematically examines the various types of structural modifications that can be made to cyclic peptides in order to achieve such conformational control.

Conformation of the Macrocyclic Drug Lorlatinib in Polar and Nonpolar Environments: A MD Simulation and NMR Study

The replica exchange molecular dynamics (REMD) simulation is demonstrated to readily predict the conformations of the macrocyclic drug lorlatinib, as validated by solution NMR studies. In aqueous solution, lorlatinib adopts a conformer identical to its target bound structure. This conformer is stabilized by an extensive hydrogen bond network to the solvents. In chloroform, lorlatinib populates two conformers with the second one being less polar, which may contribute to lorlatinib's ability to cross cell membranes.

Conformational Sampling of Macrocyclic Drugs in Different Environments: Can We Find the Relevant Conformations?

Conformational flexibility is a major determinant of the properties of macrocycles and other drugs in beyond rule of 5 (bRo5) space. Prediction of conformations is essential for design of drugs in this space, and we have evaluated three tools for conformational sampling of a set of 10 bRo5 drugs and clinical candidates in polar and apolar environments. The distance-geometry based OMEGA was found to yield ensembles spanning larger structure and property spaces than the ensembles obtained by MOE-LowModeMD (MOE) and MacroModel (MC). Both MC and OMEGA but not MOE generated different ensembles for polar and apolar environments. All three conformational search methods generated conformers similar to the crystal structure conformers for 9 of the 10 compounds, with OMEGA performing somewhat better than MOE and MC. MOE and OMEGA found all six conformers of roxithromycin that were identified by NMR in aqueous solutions, whereas only OMEGA sampled the three conformers observed in chloroform. We suggest that characterization of conformers using molecular descriptors, e.g., the radius of gyration and polar surface area, is preferred to energy- or root-mean-square deviation-based methods for selection of biologically relevant conformers in drug discovery in bRo5 space.

Flexibility is important for inhibition of the MDM2/p53 protein-protein interaction by cyclic β-hairpins

Protein-protein interactions that have large, flat and featureless binding sites are difficult drug targets. In the development of their modulators conventional drug discovery strategies are often unsuccessful. Gaining a detailed understanding of the binding mode of protein-protein interaction inhibitors is therefore of vast importance for their future pharmaceutical use. The MDM2/p53 protein pair is a highly promising target for cancer treatment. Disruption of the protein complex using p53 α-helix mimetics has been shown to be a successful strategy to control p53 activity. To gain further insight into the binding of inhibitors to MDM2, the flexibility of four cyclic β-hairpins that act as α-helical mimetics and potential MDM2/p53 interaction inhibitors was investigated in relation to their inhibitory activity. MDM2-binding of the mimetics was determined using fluorescence polarization and surface plasmon resonance assays, whereas their conformation and dynamics in solution was described by the combined experimental and computational NAMFIS analysis. Molecular flexibility was shown to be important for the activity of the cyclic β-hairpin based MDM2 inhibitors.

Signatures of Mechanically Interlocked Topology of Lasso Peptides by Ion Mobility-Mass Spectrometry: Lessons from a Collection of Representatives

Lasso peptides are characterized by a mechanically interlocked structure, where the C-terminal tail of the peptide is threaded and trapped within an N-terminal macrolactam ring. Their compact and stable structures have a significant impact on their biological and physical properties and make them highly interesting for drug development. Ion mobility - mass spectrometry (IM-MS) has shown to be effective to discriminate the lasso topology from their corresponding branched-cyclic topoisomers in which the C-terminal tail is unthreaded. In fact, previous comparison of the IM-MS data of the two topologies has yielded three trends that allow differentiation of the lasso fold from the branched-cyclic structure: (1) the low abundance of highly charged ions, (2) the low change in collision cross sections (CCS) with increasing charge state and (3) a narrow ion mobility peak width. In this study, a three-dimensional plot was generated using three indicators based on these three trends: (1) mean charge divided by mass (ζ), (2) relative range of CCS covered by all protonated molecules (ΔΩ/Ω) and (3) mean ion mobility peak width (δΩ). The data were first collected on a set of twenty one lasso peptides and eight branched-cyclic peptides. The indicators were obtained also for eight variants of the well-known lasso peptide MccJ25 obtained by site-directed mutagenesis and further extended to five linear peptides, two macrocyclic peptides and one disulfide constrained peptide. In all cases, a clear clustering was observed between constrained and unconstrained structures, thus providing a new strategy to discriminate mechanically interlocked topologies. Graphical Abstract ᅟ.

Structural, mutational and biophysical studies reveal a canonical mode of molecular recognition between immune receptor TIGIT and nectin-2

In addition to antigen-specific stimulation of T cell receptor (TCR) by a peptide-MHC complex, the functional outcome of TCR engagement is regulated by antigen-independent costimulatory signals. Costimulatory signals are provided by an array of interactions involving activating and inhibitory receptors expressed on T cells and their cognate ligands on antigen presenting cells. T cell immunoglobulin and ITIM domain (TIGIT), a recently identified immune receptor expressed on T and NK cells, upon interaction with either of its two ligands, nectin-2 or poliovirus receptor (PVR), inhibits activation of T and NK cells. Here we report the crystal structure of the human TIGIT ectodomain, which exhibits the classic two-layer β-sandwich topology observed in other immunoglobulin super family (IgSF) members. Biophysical studies indicate that TIGIT is monomeric in solution but can form a dimer at high concentrations, consistent with the observation of a canonical immunoglobulin-like dimer interface in the crystalline state. Based on existing structural data, we present a model of the TIGIT:nectin-2 complex and utilized complementary biochemical studies to map the nectin-binding interface on TIGIT. Our data provide important structural and biochemical determinants responsible for the recognition of nectin-2 by TIGIT. Defining the TIGIT:nectin-2 binding interface provides the basis for rational manipulation of this molecular interaction for the development of immunotherapeutic reagents in autoimmunity and cancer.

Rational, computer-enabled peptide drug design: principles, methods, applications and future directions

Peptides provide promising templates for developing drugs to occupy a middle space between small molecules and antibodies and for targeting 'undruggable' intracellular protein-protein interactions. Importantly, rational or in cerebro design, especially when coupled with validated in silico tools, can be used to efficiently explore chemical space and identify islands of 'drug-like' peptides to satisfy diverse drug discovery program objectives. Here, we consider the underlying principles of and recent advances in rational, computer-enabled peptide drug design. In particular, we consider the impact of basic physicochemical properties, potency and ADME/Tox opportunities and challenges, and recently developed computational tools for enabling rational peptide drug design. Key principles and practices are spotlighted by recent case studies. We close with a hypothetical future case study.

Discovering functional, non-proteinogenic amino acid containing, peptides using genetic code reprogramming

The protein synthesis machinery of the cell, the ribosome and associated factors, is able to accurately follow the canonical genetic code, that which maps RNA sequence to protein sequence, to assemble functional proteins from the twenty or so proteinogenic amino acids. A number of innovative methods have arisen to take advantage of this accurate, and efficient, machinery to direct the assembly of non-proteinogenic amino acids. We review and compare these routes to 'reprogram the genetic code' including in vitro translation, engineered aminoacyl tRNA synthetases, and RNA 'flexizymes'. These studies show that the ribosome is highly tolerant of unnatural amino acids, with hundreds of unusual substrates of varying structure and chemistries being incorporated into protein chains. We also discuss how these methods have been coupled to selection techniques, such as phage display and mRNA display, opening up an exciting new avenue for the production of proteins and peptides with properties and functions beyond that which is possible using proteins composed entirely of the proteinogenic amino acids.

Selection-based discovery of druglike macrocyclic peptides

Macrocyclic peptides are an emerging class of therapeutics that can modulate protein-protein interactions. In contrast to the heavily automated high-throughput screening systems traditionally used for the identification of chemically synthesized small-molecule drugs, peptide-based macrocycles can be synthesized by ribosomal translation and identified using in vitro selection techniques, allowing for extremely rapid (hours to days) screening of compound libraries comprising more than 10(13) different species. Furthermore, chemical modification of translated peptides and engineering of the genetic code have greatly expanded the structural diversity of the available peptide libraries. In this review, we discuss the use of these technologies for the identification of bioactive macrocyclic peptides, emphasizing recent developments.

Getting in shape: controlling peptide bioactivity and bioavailability using conformational constraints

Chemical biologists commonly seek out correlations between the physicochemical properties of molecules and their behavior in biological systems. However, a new paradigm is emerging for peptides in which conformation is recognized as the primary determinant of bioactivity and bioavailability. This review highlights an emerging body of work that directly addresses how a peptide's conformation controls its biological effects, cell penetration, and intestinal absorption. Based on this work, the dream of mimicking the potency and bioavailability of natural product peptides is getting closer to reality.

Dynamics of the glycosidic bond: conformational space of lactose

The dynamics of the glycosidic bond of lactose was studied by a paramagnetic tagging-based NMR technique, which allowed the collection of an unusually large series of NMR data for a single compound. By the use of distance- and orientation-dependent residual dipolar couplings and pseudocontact shifts, the simultaneous fitting of the probabilities of computed conformations and the orientation of the magnetic susceptibility tensor of a series of lanthanide complexes of lactose show that its glycosidic bond samples syn/syn, anti/syn and syn/anti ϕ/ψ regions of the conformational space in water. The analysis indicates a higher reliability of pseudocontact shift data as compared to residual dipolar couplings with the presently available weakly orienting paramagnetic tagging technique. The method presented herein allows for an improved understanding of the dynamic behaviour of oligosaccharides.

A possible role for metallic ions in the carbohydrate cluster recognition displayed by a Lewis Y specific antibody

Background

Lewis Y (Le^y) is a blood group-related carbohydrate that is expressed at high surface densities on the majority of epithelial carcinomas and is a promising target for antibody-based immunotherapy. A humanized Le^y-specific antibody (hu3S193) has shown encouraging safety, pharmacokinetic and tumor-targeting properties in recently completed Phase I clinical trials.

Methodology/Principal Findings

We report the three-dimensional structures for both the free (unliganded) and bound (Le^y tetrasaccharide) hu3S193 Fab from the same crystal grown in the presence of divalent zinc ions. There is no evidence of significant conformational changes occurring in either the Le^y carbohydrate antigen or the hu3S193 binding site, which suggests a rigid fit binding mechanism. In the crystal, the hu3S193 Fab molecules are coordinated at their protein-protein interface by two zinc ions and in solution aggregation of Fab can be initiated by zinc, but not magnesium ions. Dynamic light scattering revealed that zinc ions could initiate a sharp transition from hu3S193 Fab monomers to large multimeric aggregates in solution.

Conclusions/Significance

Zinc ions can mediate interactions between hu3S193 Fab in crystals and in solution. Whether metallic ion mediated aggregation of antibody occurs in vivo is not known, but the present results suggest that similar clustering mechanisms could occur when hu3S193 binds to Le^y on cells, particularly given the high surface densities of antigen on the target tumor cells.

Oral cyclosporine A--the current picture of its liposomal and other delivery systems

The discovery of cyclosporine A was a milestone in organ transplantation and the treatment of autoimmune diseases. However, developing an efficient oral delivery system for this drug is complicated by its poor biopharmaceutical characteristics (low solubility and permeability) and the need to carefully monitor its levels in the blood. Current research is exploring various approaches, including those based on emulsions, microspheres, nanoparticles, and liposomes. Although progress has been made, none of the formulations is flawless. This review is a brief description of the main pharmaceutical systems and devices that have been described for the oral delivery of cyclosporine A in the context of the physicochemical properties of the drug and the character of its interactions with lipid membranes.

Conformational preferences of natural and C3-modified epothilones in aqueous solution

The conformational properties of the microtubule-stabilizing agent epothilone A ( 1a) and its 3-deoxy and 3-deoxy-2,3-didehydro derivatives 2 and 3 have been investigated in aqueous solution by a combination of NMR spectroscopic methods, Monte Carlo conformational searches, and NAMFIS calculations. The tubulin-bound conformation of epothilone A ( 1a), as previously proposed on the basis of solution NMR data, was found to represent a significant fraction of the ensemble of conformations present for the free ligands in aqueous solution.

The structure of a polyQ-anti-polyQ complex reveals binding according to a linear lattice model

Huntington and related neurological diseases result from expansion of a polyglutamine (polyQ) tract. The linear lattice model for the structure and binding properties of polyQ proposes that both expanded and normal polyQ tracts in the preaggregation state are random-coil structures but that an expanded polyQ repeat contains a larger number of epitopes recognized by antibodies or other proteins. The crystal structure of polyQ bound to MW1, an antibody against polyQ, reveals that polyQ adopts an extended, coil-like structure. Consistent with the linear lattice model, multimeric MW1 Fvs bind more tightly to longer than to shorter polyQ tracts and, compared with monomeric Fv, bind expanded polyQ repeats with higher apparent affinities. These results suggest a mechanism for the toxicity of expanded polyQ and a strategy to link anti-polyQ compounds to create high-avidity therapeutics.

In vitro and in vivo studies of cyclosporin A-loaded microspheres based on copolymers of lactide and ɛ-caprolactone: Comparison with conventional PLGA microspheres

A hydrophobic peptide, cyclosporin A (CyA), was incorporated in microspheres based on poly(lactide-b-epsilon-caprolactone) (P(LA-b-CL), LA/CL (in molar ratio): 78.7/21.3 and 48.1/51.9) and poly(lactide-co-glycolide) (PLGA, LA/GA: 80/20) using oil-in-water (O/W) emulsion solvent evaporation method. The microspheres were characterized by SEM, DSC and X-ray diffraction, and CyA release rate was determined by HPLC. It was revealed that CyA can be efficiently loaded into all the microspheres (exceed 96%). Compared to PLGA microspheres, P(LA-b-CL) microspheres liberated CyA more rapidly. Within the first day, about 75, 50 and 12% of CyA released from P(LA-b-CL) (48.1/51.9), P(LA-b-CL) (78.7/21.3) and PLGA microspheres, respectively, which can be attributed to the partial crystallization occurring in P(LA-b-CL) microspheres. CyA levels in whole blood were also tested. In comparison with PLGA microspheres, P(LA-b-CL) microspheres provided a higher blood level of CyA. The maximum CyA concentration in whole blood (approximately 520, 450 and 400 ng ml(-1) for P(LA-b-CL) (48.1/51.9) P(LA-b-CL) (78.7/21.3) and PLGA microspheres, respectively) was reached at the second day post administration. And then P(LA-b-CL) microspheres showed a constant CyA level (about 100-200 ng ml(-1)) for extended periods of time (several weeks). Such CyA-loaded P(LA-b-CL) microspheres displaying higher CyA concentration during the first few days and similar constant blood CyA level thereafter showed more advantages than those prepared with PLGA and could meet clinical needs more efficiently.

Effects of cyclosporin A on model lipid membranes

Cyclosporin A (CSA) is a widely used immunosuppressant drug for transplant therapy, however its limitation is its toxicity. The effect of CSA on model membranes such as dimyristoyl phosphatidylcholine (DMPC) bilayers was studied using small-angle X-ray diffraction and differential scanning calorimetry (DSC). CSA abolishes the pretransition and affects the transition of DMPC model membranes in a concentration-related manner as is shown by DSC. CSA induces a second peak at the high temperature side of the main transition, which is interpreted as a phase separation between areas rich and poor in CSA concentration. Small angle X-ray diffraction shows that the repeat distance of the DMPC bilayers in the lamellar Lalpha state increases as a function of concentration up to 10 mol% and remains constant thereafter. Furthermore, CSA affects the fatty acyl chains of the bilayer, especially the part of the chain proximal to the head group. In conclusion, CSA, as both small-angle X-ray diffraction and DSC show, affects in a concentration-wise manner the DMPC model membranes and perturbs the bilayer, in particular the acyl chain region.

Crystal structures of human antibodies: a detailed and unfinished tapestry of immunoglobulin gene products

Sequencing of all human immunoglobulin (Ig) germline gene segments has recently been completed. However, our first glimpses of the recombined products of this combinatorial gene system were in the 1970s, in landmark publications, reporting the crystal structures of two human myeloma proteins, the Mcg lambda light chain dimer and the New IgG1(lambda) Fab. Although numerous crystal structures of murine and human antibodies have now been determined, only a relatively small proportion of the human germline genes have had their corresponding protein three-dimensional structures resolved. Therefore, further structural investigations are required before the inherent diversity of the antibody repertoire can be fully appreciated. We discuss the detailed structural information available for human antibodies with regard to their immune functions. Also discussed, is how the structural information is finding application in the 'humanization' of murine antibodies as part of their development as 'biopharmaceuticals' for the treatment of human disease.

Cyclosporin A as a model antigen: immunochemical and structural studies

The immunosuppressant drug cyclosporin (Cs) A is a cyclic undecapeptide which has been used as a model antigen because structural information and a large number of analogs, modified at each of its 11 positions, were available. This review summarizes immunochemical and crystallographic studies of the interaction between the Fab of monoclonal antibody R45-45-11 and Cs. Three points are discussed: (1) the different conformations of CsA and the question of its biologically active form; (2) the Fab-CsA recognition mechanism; and (3) the relationship between structure and binding properties of CsA analogs.

Crystal structure of the liganded anti-gibberellin A(4) antibody 4-B8(8)/E9 Fab fragment

Gibberellins, a class of plant hormones, consist of more than 120 members. Only a few of them are recognized by a receptor that remains unknown. The haptenic mouse monoclonal antibody, 4-B8(8)/E9, was generated against gibberellin A(4) (GA(4)) to recognize biologically active GA selectivity, and we attempted to confirm the binding properties between the antibody and GA(4). We carried out an X-ray crystallographic analysis of the 4-B8(8)/E9 Fab fragment complexed with GA(4) at a 2.8 A resolution by using the molecular replacement method. The crystal structure of the Fab fragment showed the typical immunoglobulin fold of the beta-barrel structure which is the common motif of all antibodies. A small hapten-combining site was made up of three heavy chain CDR loops. On the other hand, CDRs of the light chain did not interact directly with GA(4). The C/D rings of the GA(4) molecule were in van der Waals contact mainly with the aromatic side chain of Tyr100AH and Phe100BH of CDR-H3. The 3 beta-hydroxyl and 6 beta-carboxyl groups were, respectively, hydrogen-bonded to the main chain of Ala33H and to the Thr53H heavy chain.

Peptide interactions with G-protein coupled receptors

Peptide recognition by G-protein coupled receptors (GPCRs) is reviewed with an emphasis on the indirect approach used to determine the receptor-bound conformation of peptide ligands. This approach was developed in response to the lack of detailed structural information available for these receptors. Recent advances in the structural determination of rhodopsin (the GPCR of the visual system) by crystallography have provided a scaffold for homology modeling of the inactive state of a wide variety of GPCRs that interact with peptide messages. Additionally, the ability to mutate GPCRs and assay compounds of similar chemical structure to test a common binding site on the receptor provides a firm experimental basis for structure-activity studies. Recognition motifs, common in other well-studied systems such as proteolytic enzymes and major histocompatibility class receptors (MHC) are reviewed briefly to provide a basis of comparison. Finally, the development of true peptidomimetics is contrasted with nonpeptide ligands, discovered through combinatorial chemistry. In many systems, the evidence suggests that the peptide ligands bind at the interface between the transmembrane segments and the extracellular loops, while nonpeptide antagonists bind within the transmembrane segments. Plausible models of GPCRs and the mechanism by which they activate G-proteins on binding peptides are beginning to emerge.

Cross-reactive binding of cyclic peptides to an anti-TGFalpha antibody Fab fragment: an X-ray structural and thermodynamic analysis

The monoclonal antibody tAb2 binds the N-terminal sequence of transforming growth factor alpha, VVSHFND. With the help of combinatorial peptide libraries it is possible to find homologous peptides that bind tAb2 with an affinity similar to that of the epitope. The conformational flexibility of short peptides can be constrained by cyclization in order to improve their affinity to the antibody and their stability towards proteolysis. Two cyclic peptides which are cross-reactive binders for tAb2 were selected earlier using combinatorial peptide libraries. One is cyclized by an amide bond between the N-alpha group and the side-chain of the last residue (cyclo-SHFNEYE), and the other by a disulfide bridge (cyclo-CSHFNDYC). The complex structures of tAb2 with the linear epitope peptide VVSHFND and with cyclo-SHFNEYE were determined by X-ray diffraction. Both peptides show a similar conformation and binding pattern in the complex. The linear peptide SHFNEYE does not bind tAb2, but cyclo-SHFNEYE is stabilized in a loop conformation suitable for binding. Hence the cyclization counteracts the exchange of aspartate in the epitope sequence to glutamate. Isothermal titration calorimetry was used to characterize the binding energetics of tAb2 with the two cyclic peptides and the epitope peptide. The binding reactions are enthalpically driven with an unfavorable entropic contribution under all measured conditions. The association reactions are characterized by negative DeltaC(p) changes and by the uptake of one proton per binding site. A putative candidate for proton uptake during binding is the histidine residue in each of the peptides. Hydrogen bonds and the putative formation of an electrostatic pair between the protonated histidine and a carboxy group may contribute markedly to the favorable enthalpy of complex formation. Implications to cyclization of peptides for stabilization are discussed.

Covariance analysis of protein families: the case of the variable domains of antibodies

A nonrestrictive method for identifying covariance in protein families is described and applied to human and mouse germline Vkappa and VH sequence alignments. Amino acids that occur at each position in a sequence alignment are divided into two sets, called a word, by generating all possible combinations of alternative amino acids. Each word is associated with a pattern of changes. Words with identical patterns identify covariant positions. In antibody variable domains, the number of words generated ranged between 1103 and 2195 depending on the alignment, of which 4 to 12 % occurred in covariant pairs. Despite the nonrestrictive character of pattern generation, covariant residues did not reflect a random selection with respect to the nature of amino acid changes and/or their spatial proximity in a reference crystallographic structure. This approach allowed the identification of a covariance signal for positions with high variability, mostly located in the outer part of the common structural framework of antibody variable domains. Covariance in these regions may reflect the existence of alternative and mutually exclusive atomic arrangements that are compatible with antibody function. The method may be of general applicability to rationalize residue variability in protein families.

The three-dimensional structure of a complex of a murine Fab (NC10. 14) with a potent sweetener (NC174): an illustration of structural diversity in antigen recognition by immunoglobulins

The three-dimensional structure of a complex of an Fab from a murine IgG2b(lambda) antibody (NC10.14) with a high potency sweet tasting hap- ten, N-(p-cyanophenyl)-N'-(diphenylmethyl)-N"-(carboxymethyl)guan idine (NC174), has been determined to 2.6 A resolution by X-ray crystallography. This complex crystallized in the triclinic space group P1, with two molecules in the asymmetric unit. In contrast to a companion monoclonal antibody (NC6.8) with a kappa-type light chain and similar high affinity for the NC174 ligand, the NC10.14 antibody possessed a large and deep antigen combining site bounded primarily by the third complementarity-determining regions (CDR3s) of the light and heavy chains. CDR3 of the heavy chain dominated the site and its crown protruded into the external solvent as a type 1' beta-turn. NC174 was nested against HCDR3 and was held in place by two tryptophan side-chains (L91 and L96) from LCDR3. The diphenyl rings were accommodated on an upper tier of the binding pocket that is largely hydrophobic. At the floor of the site, a positively charged arginine side-chain (H95) stabilized the orientation of the electronegative cyano group of the hapten. The negative charge on the acetate group was partially neutralized by a hydrogen bond with the phenolic hydroxyl group of tyrosine H58. Comparisons of the modes of binding of NC174 to the NC6.8 and NC10.14 antibodies illustrate the enormous structural and mechanistic diversity manifest by immune responses.

Dual conformations for the HIV-1 gp120 V3 loop in complexes with different neutralizing fabs

BACKGROUND

The third hypervariable (V3) loop of HIV-1 gp120 has been termed the principal neutralizing determinant (PND) of the virus and is involved in many aspects of virus infectivity. The V3 loop is required for viral entry into the cell via membrane fusion and is believed to interact with cell surface chemokine receptors on T cells and macrophages. Sequence changes in V3 can affect chemokine receptor usage, and can, therefore, modulate which types of cells are infected. Antibodies raised against peptides with V3 sequences can neutralize laboratory-adapted strains of the virus and inhibit syncytia formation. Fab fragments of these neutralizing antibodies in complex with V3 loop peptides have been studied by X-ray crystallography to determine the conformation of the V3 loop.

RESULTS

We have determined three crystal structures of Fab 58.2, a broadly neutralizing antibody, in complex with one linear and two cyclic peptides the amino acid sequence of which comes from the MN isolate of the gp120 V3 loop. Although the peptide conformations are very similar for the linear and cyclic forms, they differ from that seen for the identical peptide bound to a different broadly neutralizing antibody, Fab 59.1, and for a similar peptide bound to the MN-specific Fab 50.1. The conformational difference in the peptide is localized around residues Gly-Pro-Gly-Arg, which are highly conserved in different HIV-1 isolates and are predicted to adopt a type II beta turn.

CONCLUSIONS

The V3 loop can adopt at least two different conformations for the highly conserved Gly-Pro-Gly-Arg sequence at the tip of the loop. Thus, the HIV-1 V3 loop has some inherent conformational flexibility that may relate to its biological function.

Crystal structure at 1.95 A resolution of the breast tumour-specific antibody SM3 complexed with its peptide epitope reveals novel hypervariable loop recognition

The anti-breast tumour antibody SM3 has a high selectivity in reacting specifically with carcinoma-associated mucin. SM3 recognises the core repeating motif (Pro-Asp-Thr-Arg-Pro) of aberrantly glycosylated epithelial mucin MUC1, and has potential as a therapeutic and diagnostic tool. Here we report the crystal structure of the Fab fragment of SM3 in complex with a 13-residue MUC1 peptide antigen (Thr1P-Ser2P-Ala3P-Pro4P-Asp5P-Thr6P -Arg7P-Pro8P-Ala9P-Pro10P-Gly11P- Ser12P-Thr13P). The SM3-MUC1 peptide structure was solved by molecular replacement, and the current model is refined at 1.95 A resolution with an R-factor of 21.3% and R-free 28.3%. The MUC1 peptide is bound both by non-polar interactions and hydrogen bonds in an elongated groove in the antibody-combining site through interactions with Complimentarity Determining Regions (CDRs), three of the light chain (L1, L2, L3) and two of the heavy chain (H1 and H3). The conformation of the peptide is mainly extended with no discernable standard secondary structure. There is a single non-proline cis-peptide bond in H3 (Val95H-Gly96H-Gln97H-Phe98H-Ala101H-Ty r102H) between Gly96H and Gln97H, which appears to play a role in SM3-peptide antigen interactions, and represents the first such example within an antibody hypervariable loop. The SM3-MUC1 peptide structure has implications for rational therapeutic and diagnostic antibody engineering.

Reproducing the natural evolution of protein structural features with the selectively infective phage (SIP) technology. The kink in the first strand of antibody kappa domains

The beta-sandwich structure of immunoglobulin variable domains is characterized by a typical kink in the first strand, which allows the first part of the strand to hydrogen bond to the outer beta-sheet (away from the VH-VL interface) and the second part to the inner beta-sheet. This kink differs in length and sequence between the Vkappa, Vlambda and VH domains and yet is involved in several almost perfectly conserved interactions with framework residues. We have used the selectively infective phage (SIP) system to select the optimal kink region from several defined libraries, using an anti-hemagglutinin single-chain Fv (scFv) fragment as a model system. Both for the kink with the Vkappa domain length and that with the Vlambda length, a sequence distribution was selected that coincides remarkably well with the sequence distribution of natural antibodies. The selected scFv fragments were purified and characterized, and thermodynamic stability was found to be the prime factor responsible for selection. These data show that the SIP technology can be used for optimizing protein structural features by evolutionary approaches.

NMR structural characterization of oligo-N-substituted glycine lead compounds from a combinatorial library

Synthesis and screening of combinatorial libraries for pharmaceutical lead discovery is a rapidly expanding field. Oligo-N-substituted glycines (NSGs) were one of the earliest sources of molecular diversity in combinatorial libraries. In one of the first demonstrations of the power of combinatorial chemistry, two NSG trimers, CHIR-2279 and CHIR-4531, were identified as nM ligands for two 7-transmembrane G-protein-coupled receptors. The NMR characterization of these two lead compounds was undertaken to verify covalent connectivity and to determine solution conformations, if any. The sequential chemical shift assignments were performed using a new strategy for assigning 1H and 13C resonances of NSGs. The conformational preferences were then determined in both an aqueous co-solvent system and an organic solvent to probe the effects of hydrophobic collapse. NSGs are expected to be more flexible than peptides due to the tertiary amide, with both cis and trans amide bond conformations being accessible. Solution NMR studies indicate that although CHIR-2279 and CHIR-4531 have identical backbones and termini, and very similar side chains, they do not display the same solution conformational characteristics.

Conformations of the third hypervariable region in the VH domain of immunoglobulins

Antigen-combining sites of antibodies are constructed from six loops from VL and VH domains. The third hypervariable region of the heavy chain is far more variable than the others in length, sequence and structure, and was not included in the canonical-structure description of the conformational repertoire of the three hypervariable regions of V kappa chains and the first two of VH chains. Here we present an analysis of the conformations of the third hypervariable region of VH domains (the H3 regions) in antibodies of known structure. We define the H3 region as comprising the residues between 92Cys and 104Gly. We divide it into a torso comprising residues proximal to the framework, four residues from the N terminus and six residues from the C terminus, and a head. There are two major classes of H3 structures that have more than ten residues between 92Cys and 104Gly: (1) the conformation of the torso has a beta-bulge at residue 101, and (2) the torso does not contain a bulge, but continues the regular hydrogen-bonding pattern of the beta-sheet hairpin. The choice of bulged versus non-bulged torso conformation is dictated primarily by the sequence, through the formation of a salt bridge between the side-chains of an Arg or Lys at position 94 and an Asp at position 101. Thus the torso region appears to have a limited repertoire of conformations, as in the canonical structure model of other antigen-binding loops. The heads or apices of the loops have a very wide variety of conformations. In shorter H3 regions, and in those containing the non-bulged torso conformation, the heads follow the rules relating sequence to structure in short hairpins. We surveyed the heads of longer H3 regions, finding that those with bulged torsos present many very different conformations of the head. We recognize that H3, unlike the other five antigen-binding loops, has a conformation that depends strongly on the environment, and we have analysed the interactions of H3 with residues elsewhere in the VH domain, in the VL domain, and with ligands, and their effects on the conformation of H3. We tested these results by attempts to predict the conformations of H3 regions in antibody structures solved after the results were derived. The general conclusion of this work is that the conformation of H3 shows some regularities, from which rules relating sequence to conformation can be stated, but to a less complete degree than for the other five antigen-binding loops. Accurate prediction of the torso conformation is possible in most cases; predictions of the conformation of the head is possible in some cases. However, our understanding of the sequence-structure relationships has reduced the uncertainty to no more than a few residues at the apex of the H3 region.

Three-dimensional structure of a human Fab with high affinity for tetanus toxoid

BACKGROUND

The wide range of antibody specificity and affinity results from the differing shapes and chemical compositions of their binding sites. These shapes range from discrete grooves in antibodies elicited by linear oligomers of nucleotides and carbohydrates to shallow depressions or flat surfaces for accommodation of proteins, peptides and large organic compounds.

OBJECTIVES

To determine the Fab structure of a high-affinity human antitoxin antibody. To explore structural features which enable the antibody to bind to intact tetanus toxoid, peptides derived from the sequence of the natural immunogen and antigenic mimics identified by combinatorial chemistry. To explain why this Fab shows a remarkable tendency to produce crystals consistently diffracting to d spacings of 1.7-1.8 A. To use this information to engineer a strong tendency to crystallize into the design of other Fabs.

STUDY DESIGN

The protein was crystallized in hanging or sitting drops by a microseeding technique in polyethylene glycol (PEG) 8000. Crystals were subjected to X-ray analysis and the three-dimensional structure of the Fab was determined by the molecular replacement method. Interactive computer graphics were employed to fit models to electron density maps, survey the structure in multiple views and discover the crystal packing motif of the protein.

RESULTS

Exceptionally large single crystals of this protein have been obtained, one measuring 5 x 3 x 2 mm (l x w x d). The latter was cut into six irregular pieces, each retaining the features of the original in diffracting to high resolution (1.8 A) with little decay in the X-ray beam. In an individual Fab, the active site is relatively flat and it seems likely that the protein antigen and derivative peptides are tightly held on the outer surface without significant penetration into the interior. There is no free space to accommodate even a dipeptide between VH and VL. One of the unique features of the B7-15A2 Fab is a large aliphatic ridge dominating the center of the active site. The CDR3 of the H chain contributes significantly to this ridge, as well as to adjoining regions projected to be important for the docking of the antigen. Both the ease of crystallization and the favorable diffraction properties are mainly attributable to the tight packing of the protein molecules in the crystal lattice.

DISCUSSION

The B7-15A2 active site provides a stable and well defined platform for high affinity docking of proteins, peptides and their mimotopes. The advantages for future developments are suggested by the analysis of the crystal properties. It should be possible to incorporate the features promoting crystallization, close packing and resistance to radiation damage into engineered human antibodies without altering the desired specificities and affinities of their active sites.

Does conformational free energy distinguish loop conformations in proteins?

Limitations in protein homology modeling often arise from the inability to adequately model loops. In this paper we focus on the selection of loop conformations. We present a complete computational treatment that allows the screening of loop conformations to identify those that best fit a molecular model. The stability of a loop in a protein is evaluated via computations of conformational free energies in solution, i.e., the free energy difference between the reference structure and the modeled one. A thermodynamic cycle is used for calculation of the conformational free energy, in which the total free energy of the reference state (i.e., gas phase) is the CHARMm potential energy. The electrostatic contribution of the solvation free energy is obtained from solving the finite-difference Poisson-Boltzmann equation. The nonpolar contribution is based on a surface area-based expression. We applied this computational scheme to a simple but well-characterized system, the antibody hypervariable loop (complementarity-determining region, CDR). Instead of creating loop conformations, we generated a database of loops extracted from high-resolution crystal structures of proteins, which display geometrical similarities with antibody CDRs. We inserted loops from our database into a framework of an antibody; then we calculated the conformational free energies of each loop. Results show that we successfully identified loops with a "reference-like" CDR geometry, with the lowest conformational free energy in gas phase only. Surprisingly, the solvation energy term plays a confusing role, sometimes discriminating "reference-like" CDR geometry and many times allowing "non-reference-like" conformations to have the lowest conformational free energies (for short loops). Most "reference-like" loop conformations are separated from others by a gap in the gas phase conformational free energy scale. Naturally, loops from antibody molecules are found to be the best models for long CDRs (> or = 6 residues), mainly because of a better packing of backbone atoms into the framework of the antibody model.

A molecular basis for different interactions of marine toxins with protein phosphatase-1. Molecular models for bound motuporin, microcystins, okadaic acid, and calyculin A

The hepatotoxic cyclic heptapeptide microcystins and cyclic pentapeptide nodularins are powerful liver tumor promoters and potent inhibitors of the catalytic subunits of protein phosphatase-1 and -2A (PP-1c and PP-2Ac). In marked contrast to microcystins, which interact covalently with PP-1 and PP-2A, the nodularins do not bind covalently to PP-1 and PP-2A and may additionally possess unique carcinogenic properties. The conformation of microcystin-LR has been determined in solution and bound to PP-1c. We show here that the free NMR solution structures of two distinct microcystin structural congeners (microcystin-LR and -LL) are remarkably similar to the bound crystal structure of microcystin-LR. We have exploited this finding by using Metropolis Monte Carlo modeling to dock the solution structures of microcystin-LL and the marine toxin motuporin (nodularin-V) onto the crystal structure of PP-1c. Both of these toxins occupy a position similar to that of microcystin-LR when bound to PP-1c. However, although there are relatively minor differences in the structural orientation of microcystin-LL compared with microcystin-LR, there is a striking difference in the position of the N-methyldehydrobutyrine residue in motuporin relative to the comparable N-methyldehydroalanine residue in microcystin-LR. We propose that this difference in orientation provides a molecular explanation for why nodularins are incapable of forming a covalent linkage with PP-1c. Furthermore, the predicted position of N-methyldehydrobutyrine in motuporin is at the surface of the PP-1c-toxin complex, which may thus facilitate chemical interaction with a further macromolecule(s) possibly relating to its carcinogenic properties. PP-1c and PP-2Ac are also targets for other marine toxins such as okadaic acid and calyculin A. It was therefore of interest to use Metropolis Monte Carlo modeling to dock the known free crystal structures of okadaic acid and calyculin A to the crystal structure of PP-1c. These experiments predict that both okadaic acid and calyculin A are strikingly similar to microcystins and motuporin in their tertiary structure and relative PP-1c binding position.

Crystal structures of peptides and modified peptides

The X-ray diffraction experiments on peptides and related molecules which have been carried out in Western Europe, except Italy, in the last eight years are reviewed. The crystal structures of some bioactive peptides such as Leu-enkephalin (a neurotransmitter), cyclosporin A (an immunomodulator in both the free and protein-bound state), balhimycin (an antibiotic) and octreotide (a somatostatin analogue) are briefly presented. Crystallized N- and C-protected model peptides have given an insight into the folding tendency and folding modes depending on the peptide sequences. The crystal structures of various pseudopeptide molecules reveal how the three-dimensional structure of peptide analogues can be modulated by substituting non-peptide groups for the peptide bond. A few examples of structural mimetics of the beta- and gamma-turns, and of templates for alpha-helix induction are also presented.

Modeling conformational changes in cyclosporin A

NMR and X-ray structures for the immunosuppressant cyclosporin A (CsA) reveal a remarkable difference between the unbound (free) conformation in organic solvents and the conformation bound to cyclophilin. We have performed computer simulations of the molecular dynamics of CsA under a variety of conditions and confirmed the stability of these two conformations at room temperature in water and in vacuum. However, when the free conformation was modeled in vacuum at 600 K, a transition pathway leading to the bound conformation was observed. This involved a change in the cis MeLeu-9 peptide bond to a trans conformation and the movement of the side chains forming the dominant hydrophobic cluster (residues MeBmt-1, MeLeu-4, MeLeu-6, and MeLeu-10) to the opposite side of the plane formed by the backbone atoms in the molecular ring. The final conformation had a backbone RMS deviation from the bound conformation of 0.53 A and was as stable in dynamics simulations as the bound conformation. Our calculations allowed us to make a detailed analysis of a transition pathway between the free and the bound conformations of CsA and to identify two distinct regions of coordinated movement in CsA, both of which underwent transitions independently.