Atomic force microscopy and dissection of gap junctions

Diversity in connexin biology

Over 35 years ago the cell biology community was introduced to connexins as the subunit employed to assemble semicrystalline clusters of intercellular channels that had been well described morphologically as gap junctions. The decade that followed would see knowledge of the unexpectedly large 21-member human connexin family grow to reflect unique and overlapping expression patterns in all organ systems. While connexin biology initially focused on their role in constructing highly regulated intercellular channels, this was destined to change as discoveries revealed that connexin hemichannels at the cell surface had novel roles in many cell types, especially when considering connexin pathologies. Acceptance of connexins as having bifunctional channel properties was initially met with some resistance, which has given way in recent years to the premise that connexins have multifunctional properties. Depending on the connexin isoform and cell of origin, connexins have wide-ranging half-lives that vary from a couple of hours to the life expectancy of the cell. Diversity in connexin channel characteristics and molecular properties were further revealed by X-ray crystallography and single-particle cryo-EM. New avenues have seen connexins or connexin fragments playing roles in cell adhesion, tunneling nanotubes, extracellular vesicles, mitochondrial membranes, transcription regulation, and in other emerging cellular functions. These discoveries were largely linked to Cx43, which is prominent in most human organs. Here, we will review the evolution of knowledge on connexin expression in human adults and more recent evidence linking connexins to a highly diverse array of cellular functions.

Comparative Analysis of Cx31 and Cx43 in Differentiation-Competent Rodent Keratinocytes

When considering connexin expression and regulation, the epidermis of the skin is one of the most complex tissues found in mammals even though it largely contains a single cell type, the keratinocyte. In the rodent epidermis, up to 9 connexin family members have been detected at the mRNA level. Many of these connexins are temporally and spatially regulated in coordination with keratinocyte progenitor cell differentiation and migration from the stratum basale to form the stratum spinosum and stratum granulosum layers before finally forming the stratum corneum. Cx43 is the principal connexin found in basal keratinocytes and to a lesser degree found in keratinocytes that have begun to differentiate where Cx26, Cx30 and Cx31 become prevalent. Here we show that the CRISPR-Cas9 ablation of Cx43 reduces overall gap junction coupling in monolayer cultures of rat epidermal keratinocytes (REKs) and dysregulates the differentiation of REKs when grown in organotypic cultures. Natively found in differentiated keratinocytes, Cx31 readily assembles into gap junctions when expressed in REKs where it can extensively co-assemble into the same gap junctions with co-expressed Cx30. Time-lapse imaging indicated that many Cx31 gap junctions are mobile within the plasma membrane undergoing both fusion and fission events. Finally, the persistence of pre-existing Cx31 gap junctions in the presence of the protein trafficking blocker, brefeldin A, is longer than that found for Cx43 gap junctions indicating that it has a distinctly different life expectancy in REKs. Collectively, this study highlights the importance of Cx43 in rodent keratinocyte differentiation and suggests that Cx31 acquires life-cycle properties that are distinct from Cx43.

Reversible Cation-Selective Attachment and Self-Assembly of Human Tau on Supported Brain Lipid Membranes

Misfolding and aggregation of the neuronal, microtubule-associated protein tau is involved in the pathogenesis of Alzheimer's disease and tauopathies. It has been proposed that neuronal membranes could play a role in tau release, internalization, and aggregation and that tau aggregates could exert toxicity via membrane permeabilization. Whether and how tau interacts with lipid membranes remains a matter of discussion. Here, we characterize the interaction of full-length human tau (htau40) with supported lipid membranes (SLMs) made from brain total lipid extract by time-lapse high-resolution atomic force microscopy (AFM). We observe that tau attaches to brain lipid membranes where it self-assembles in a cation-dependent manner. Sodium triggers the attachment, self-assembly, and growth, whereas potassium inhibits these processes. Moreover, tau assemblies are stable in the presence of sodium and lithium but disassemble in the presence of potassium and rubidium. Whereas the pseudorepeat domains (R1-R4) of htau40 promote the sodium-dependent attachment to the membrane and stabilize the tau assemblies, the N-terminal region promotes tau self-assembly and growth.

Atomic Force Microscopy for Protein Detection and Their Physicoсhemical Characterization

This review is focused on the atomic force microscopy (AFM) capabilities to study the properties of protein biomolecules and to detect the proteins in solution. The possibilities of application of a wide range of measuring techniques and modes for visualization of proteins, determination of their stoichiometric characteristics and physicochemical properties, are analyzed. Particular attention is paid to the use of AFM as a molecular detector for detection of proteins in solutions at low concentrations, and also for determination of functional properties of single biomolecules, including the activity of individual molecules of enzymes. Prospects for the development of AFM in combination with other methods for studying biomacromolecules are discussed.

Probing Single Virus Binding Sites on Living Mammalian Cells Using AFM

In the last years, atomic force microscopy (AFM)-based approaches have evolved into a powerful multiparametric tool that allows biological samples ranging from single receptors to membranes and tissues to be probed. Force-distance curve-based AFM (FD-based AFM) nowadays enables to image living cells at high resolution and simultaneously localize and characterize specific ligand-receptor binding events. In this chapter, we present how FD-based AFM permits to investigate virus binding to living mammalian cells and quantify the kinetic and thermodynamic parameters that describe the free-energy landscape of the single virus-receptor-mediated binding. Using a model virus, we probed the specific interaction with cells expressing its cognate receptor and measured the affinity of the interaction. Furthermore, we observed that the virus rapidly established specific multivalent interactions and found that each bond formed in sequence strengthens the attachment of the virus to the cell.

Imaging modes of atomic force microscopy for application in molecular and cell biology

Atomic force microscopy (AFM) is a powerful, multifunctional imaging platform that allows biological samples, from single molecules to living cells, to be visualized and manipulated. Soon after the instrument was invented, it was recognized that in order to maximize the opportunities of AFM imaging in biology, various technological developments would be required to address certain limitations of the method. This has led to the creation of a range of new imaging modes, which continue to push the capabilities of the technique today. Here, we review the basic principles, advantages and limitations of the most common AFM bioimaging modes, including the popular contact and dynamic modes, as well as recently developed modes such as multiparametric, molecular recognition, multifrequency and high-speed imaging. For each of these modes, we discuss recent experiments that highlight their unique capabilities.

Exchange of chemical signals between cardiac cells. Fundamental role on cell communication and metabolic cooperation

The exchange of chemical signals between cardiac cells and its relevance for cell communication and metabolic cooperation was reviewed. The role of gap junctions on the transfer of chemical information was discussed as well as the different factors involved in its regulation including changes in cell volume, high glucose, activation of the renin angiotensin aldosterone system including the intracrine effect of renin and angiotensin II on chemical coupling and cardiac energetics. Finally, the possible role of epigenetic changes of the renin angiotensin aldosterone system (RAAS) on the expression of components of the RAAS was discussed. The evidence available leads to the conception of the heart as a metabolic syncytium in which glucose as well nucleotides and hormones can flow from cell-to-cell though gap junctions, providing a new vision of how alterations in metabolic cooperation can induce cardiac diseases. These findings represent a stimulus for future research in this important area of cardiac physiology and pathology.

Ion Channel Formation by Tau Protein: Implications for Alzheimer's Disease and Tauopathies

Tau is a microtubule associated protein implicated in the pathogenesis of several neurodegenerative diseases. Because of the channel forming properties of other amyloid peptides, we employed planar lipid bilayers and atomic force microscopy to test tau for its ability to form ion permeable channels. Our results demonstrate that tau can form such channels, but only under acidic conditions. The channels formed are remarkably similar to amyloid peptide channels in their appearance, physical and electrical size, permanence, lack of ion selectivity, and multiple channel conductances. These channels differ from amyloid channels in their voltage dependence and resistance to blockade by zinc ion. These channels could explain tau’s pathologic role in disease by lowering membrane potential, dysregulating calcium, depolarizing mitochondria, or depleting energy stores. Tau might also combine with amyloid beta peptides to form toxic channels.

Cellular level robotic surgery: Nanodissection of intermediate filaments in live keratinocytes

We present the nanosurgery on the cytoskeleton of live cells using AFM based nanorobotics to achieve adhesiolysis and mimic the effect of pathophysiological modulation of intercellular adhesion. Nanosurgery successfully severs the intermediate filament bundles and disrupts cell-cell adhesion similar to the desmosomal protein disassembly in autoimmune disease, or the cationic modulation of desmosome formation. Our nanomechanical analysis revealed that adhesion loss results in a decrease in cellular stiffness in both cases of biochemical modulation of the desmosome junctions and mechanical disruption of intercellular adhesion, supporting the notion that intercellular adhesion through intermediate filaments anchors the cell structure as focal adhesion does and that intermediate filaments are integral components in cell mechanical integrity. The surgical process could potentially help reveal the mechanism of autoimmune pathology-induced cell-cell adhesion loss as well as its related pathways that lead to cell apoptosis.

Nanoscale adhesion forces between enamel pellicle proteins and hydroxyapatite

The acquired enamel pellicle (AEP) is important for minimizing the abrasion caused by parafunctional conditions as they occur, for instance, during bruxism. It is a remarkable feature of the AEP that a protein/peptide film can provide enough protection in normofunction to prevent teeth from abrasion and wear. Despite its obvious critical role in the protection of tooth surfaces, the essential adhesion features of AEP proteins on the enamel surface are poorly characterized. The objective of this study was to measure the adhesion force between histatin 5, a primary AEP component, and hydroxyapatite (HA) surfaces. Both biotinylated histatin 5 and biotinylated human serum albumin were allowed to adsorb to streptavidin-coated silica microspheres attached to atomic force microscope (AFM) cantilevers. A multimode AFM with a Nanoscope IIIa controller was used to measure the adhesion force between protein-functionalized silica microspheres attached to cantilever tips and the HA surface. The imaging was performed in tapping mode with a Si3N4 AFM cantilever, while the adhesion forces were measured in AFM contact mode. A collection of force-distance curves (~3,000/replicate) was obtained to generate histograms from which the adhesion forces between histatin 5 or albumin and the HA surface were measured. We found that histatin 5 exhibited stronger adhesion forces (90% >1.830 nN) to the HA surface than did albumin (90% > 0.282 nN). This study presents an objective approach to adhesion force measurements between histatin 5 and HA, and provides the experimental basis for measuring the same parameters for other AEP constituents. Such knowledge will help in the design of synthetic proteins and peptides with preventive and therapeutic benefits for tooth enamel.

Gap junctions

Gap junctions are essential to the function of multicellular animals, which require a high degree of coordination between cells. In vertebrates, gap junctions comprise connexins and currently 21 connexins are known in humans. The functions of gap junctions are highly diverse and include exchange of metabolites and electrical signals between cells, as well as functions, which are apparently unrelated to intercellular communication. Given the diversity of gap junction physiology, regulation of gap junction activity is complex. The structure of the various connexins is known to some extent; and structural rearrangements and intramolecular interactions are important for regulation of channel function. Intercellular coupling is further regulated by the number and activity of channels present in gap junctional plaques. The number of connexins in cell-cell channels is regulated by controlling transcription, translation, trafficking, and degradation; and all of these processes are under strict control. Once in the membrane, channel activity is determined by the conductive properties of the connexin involved, which can be regulated by voltage and chemical gating, as well as a large number of posttranslational modifications. The aim of the present article is to review our current knowledge on the structure, regulation, function, and pharmacology of gap junctions. This will be supported by examples of how different connexins and their regulation act in concert to achieve appropriate physiological control, and how disturbances of connexin function can lead to disease.

Quantitative imaging of the electrostatic field and potential generated by a transmembrane protein pore at subnanometer resolution

Elucidating the mechanisms by which proteins translocate small molecules and ions through transmembrane pores and channels is of great interest in biology, medicine, and nanotechnology. However, the characterization of pore forming proteins in their native state lacks suitable methods that are capable of high-resolution imaging (~1 nm) while simultaneously mapping physical and chemical properties. Here we report how force-distance (FD) curve-based atomic force microscopy (AFM) imaging can be applied to image the native pore forming outer membrane protein F (OmpF) at subnanometer resolution and to quantify the electrostatic field and potential generated by the transmembrane pore. We further observe the electrostatic field and potential of the OmpF pore switching "on" and "off" in dependence of the electrolyte concentration. Because electrostatic field and potential select for charged molecules and ions and guide them to the transmembrane pore the insights are of fundamental importance to understand the pore function. These experimental results establish FD-based AFM as a unique tool to image biological systems to subnanometer resolution and to quantify their electrostatic properties.

Single-molecule force spectroscopy of G-protein-coupled receptors

The applicability of single-molecule force spectroscopy (SMFS) to characterize membrane proteins in vitro is developing rapidly and opening a wide range of fascinating possibilities to study how intra- and intermolecular interactions determine their structural stability and functional state. In particular, understanding how molecular interactions contribute to the functional state of G-protein-coupled receptors (GPCRs) is of importance because they mediate most of our physiological responses and act as therapeutic targets for a broad spectrum of diseases. In our review we focus on SMFS to characterize GPCRs embedded in their physiologically relevant membranes and exposed to physiologically relevant conditions. SMFS uses a molecularly sharp stylus to grasp the terminal end of a GPCR and to quickly unfold the receptor while recording interaction forces. The positional accuracy of SMFS localizes these interactions to structural segments of the GPCR whereas the sensitivity of SMFS enables their stabilizing interaction forces to be quantified. To further investigate the kinetic, energetic and mechanical properties of the structural segments, dynamic SMFS (DFS) probes their stability over a wide range of loading rates. These parameters provide insight into the energy landscape that provides information on the structural and functional properties of the GPCRs. Selected highlights exemplify the application of SMFS to characterize inter- and intramolecular interactions, which change the properties of GPCRs in relation to their functional state (e.g., ligand binding), diseased state (e.g., mutation), or lipid environment such as cholesterol.

Visualizing the attack of RNase enzymes on dendriplexes and naked RNA using atomic force microscopy

Cationic polymers such as poly(amidoamine), PAMAM, dendrimers have been used to electrostatically complex siRNA molecules forming dendriplexes for enhancing the cytoplasmic delivery of the encapsulated cargo. However, excess PAMAM dendrimers is typically used to protect the loaded siRNA against enzymatic attack, which results in systemic toxicity that hinders the in vivo use of these particles. In this paper, we evaluate the ability of G4 (flexible) and G5 (rigid) dendrimers to complex model siRNA molecules at low +/− ratio of 2/1 upon incubation for 20 minutes and 24 hours. We examine the ability of the formed G4 and G5 dendriplexes to shield the loaded siRNA molecules and protect them from degradation by RNase V1 enzymes using atomic force microscopy (AFM). Results show that G4 and G5 dendrimers form similar hexagonal complexes upon incubation with siRNA molecules for 20 minutes with average full width of 43±19.3 nm and 62±8.3 at half the maximum height, respectively. AFM images show that these G4 and G5 dendriplexes were attacked by RNase V1 enzyme leading to degradation of the exposed RNA molecules that increased with the increase in incubation time. In comparison, incubating G4 and G5 dendrimers with siRNA for 24 hours led to the formation of large particles with average full width of 263±60 nm and 48.3±2.5 nm at half the maximum height, respectively. Both G4 and G5 dendriplexes had a dense central core that proved to shield the loaded RNA molecules from enzymatic attack for up to 60 minutes. These results show the feasibility of formulating G4 and G5 dendriplexes at a low N/P (+/−) ratio that can resist degradation by RNase enzymes, which reduces the risk of inducing non-specific toxicity when used in vivo.

A history of gap junction structure: hexagonal arrays to atomic resolution

Gap junctions are specialized membrane structures that provide an intercellular pathway for the propagation and/or amplification of signaling cascades responsible for impulse propagation, cell growth, and development. Prior to the identification of the proteins that comprise gap junctions, elucidation of channel structure began with initial observations of a hexagonal nexus connecting apposed cellular membranes. Concomitant with technological advancements spanning over 50 years, atomic resolution structures are now available detailing channel architecture and the cytoplasmic domains that have helped to define mechanisms governing the regulation of gap junctions. Highlighted in this review are the seminal structural studies that have led to our current understanding of gap junction biology.

Heteroepitaxial streptavidin nanocrystals reveal critical role of proton "fingers" and subsurface atoms in determining adsorbed protein orientation

Characterization of noncovalent interactions between nanometer-sized structures, such as proteins, and solid surfaces is a subject of intense interest of late owing to the rapid development of numerous solid materials for medical and technological applications. Yet the rational design of these surfaces to promote the adsorption of specific nanoscale complexes is hindered by a lack of an understanding of the noncovalent interactions between nanostructures and solid surfaces. Here we take advantage of the unexpected observation of two-dimensional nanocrystals of streptavidin on muscovite mica to provide details of the streptavidin-mica interface. Analysis of atomic force microscopic images together with structural modeling identifies six positively charged residues whose terminal amine locations match the positions of the single atom-sized anionic cavities in the basal mica surface to within 1 Å. Moreover, we find that the streptavidin crystallites are oriented only along a single direction on this surface and not in either of three different directions as they must be if the protein interacted solely with the 3-fold symmetric basal surface atoms. Hence, this broken symmetry indicates that the terminal amine protons must also interact directly with the subsurface hydroxide atoms that line the bottom of these anionic cavities and generate only a single axis of symmetry. Thus, in total, these results reveal that subsurface atoms can have a significant influence on protein adsorption and orientation and identify the insertion of proton "fingers" as a means by which proteins may generally interact with solid surfaces.

Potential role of atomic force microscopy in systems biology

Systems biology is a quantitative approach for understanding a biological system at its global level through systematic perturbation and integrated analysis of all its components. Simultaneous acquisition of information data sets pertaining to the system components (e.g., genome, proteome) is essential to implement this approach. There are limitations to such an approach in measuring gene expression levels and accounting for all proteins in the system. The success of genomic studies is critically dependent on polymerase chain reaction (PCR) for its amplification, but PCR is very uneven in amplifying the samples, ineffective in scarce samples and unreliable in low copy number transcripts. On the other hand, lack of amplifying techniques for proteins critically limits their identification to only a small fraction of high concentration proteins. Atomic force microscopy (AFM), AFM cantilever sensors, and AFM force spectroscopy in particular, could address these issues directly. In this article, we reviewed and assessed their potential role in systems biology.

DeStripe: frequency-based algorithm for removing stripe noises from AFM images

Background

Atomic force microscopy (AFM) is a relatively recently developed technique that shows a promising impact in the field of structural biology and biophysics. It has been used to image the molecular surface of membrane proteins at a lateral resolution of one nanometer or less. An immediate obstacle of characterizing surface features in AFM images is stripe noise. To better interpret structures at a sub-domain level, pre-processing of AFM images for removing stripe noises is necessary. Noise removal can be performed in either spatial or frequency domain. However, denoising processing in the frequency domain is a better solution for preserving edge sharpness.

Results

We have developed a denoising protocol, called DeStripe, for AFM bio-molecular images that are contaminated with heavy and fine stripes. This program adopts a divide-and-conquer approach by dividing the Fourier spectrum of the image into central and off-center regions for noisy pixels detection and intensity restoration; it is also applicable to other images interfered with high-density stripes such as those acquired by the scanning electron microscope. The denoising effect brought by DeStripe provides better visualization for image objects without introducing additional artifacts into the restored image.

Conclusions

The DeStripe denoising effect on AFM images is illustrated in the present work. It allows extracting extended information from the topographic measurements and implicitly enhances the molecular features in the image. All the presented images were processed by DeStripe with the raw image as the only input without any requirement for other prior information. A web service, http://biodev.cea.fr/destripe, is available for running DeStripe.

Imaging and interrogating native membrane proteins using the atomic force microscope

Membrane proteins exist in a lipid bilayer and provide for cell-cell communication, transport solutes, and convert energies. Detergents are used to extract membrane proteins and keep them in solution for purification and subsequent analyses. The atomic force microscope (AFM) is a powerful tool for imaging and manipulating membrane proteins in their native state without the necessity to solubilize them. It allows membranes that are adsorbed to flat solid supports to be raster-scanned in physiological solutions with an atomically sharp tip. Therefore, AFM is capable of observing biological molecular machines at work. Superb images of native membranes have been recorded, and a quantitative interpretation of the data acquired using the AFM tip has become possible. In addition, multifunctional probes to simultaneously acquire information on the topography and electrical properties of membrane proteins have been produced. This progress is discussed here and fosters expectations for future developments and applications of AFM and single-molecule force spectroscopy.

Multidimensional atomic force microscopy: a versatile novel technology for nanopharmacology research

Nanotechnology is giving us a glimpse into a nascent field of nanopharmacology that deals with pharmacological phenomena at molecular scale. This review presents our perspective on the use of scanning probe microscopy techniques with special emphasis to multidimensional atomic force microscopy (m-AFM) to explore this new field with a particular emphasis to define targets, design therapeutics, and track outcomes of molecular-scale pharmacological interactions. The approach will be to first discuss operating principles of m-AFM and provide representative examples of studies to understand human health and disease at the molecular level and then to address different strategies in defining target macromolecules, screening potential drug candidates, developing and characterizing of drug delivery systems, and monitoring target–drug interactions. Finally, we will discuss some future directions including AFM tip-based parallel sensors integrated with other high-throughput technologies which could be a powerful platform for drug discovery.

Imaging cell wall architecture in single Zinnia elegans tracheary elements

The chemical and structural organization of the plant cell wall was examined in Zinnia elegans tracheary elements (TEs), which specialize by developing prominent secondary wall thickenings underlying the primary wall during xylogenesis in vitro. Three imaging platforms were used in conjunction with chemical extraction of wall components to investigate the composition and structure of single Zinnia TEs. Using fluorescence microscopy with a green fluorescent protein-tagged Clostridium thermocellum family 3 carbohydrate-binding module specific for crystalline cellulose, we found that cellulose accessibility and binding in TEs increased significantly following an acidified chlorite treatment. Examination of chemical composition by synchrotron radiation-based Fourier-transform infrared spectromicroscopy indicated a loss of lignin and a modest loss of other polysaccharides in treated TEs. Atomic force microscopy was used to extensively characterize the topography of cell wall surfaces in TEs, revealing an outer granular matrix covering the underlying meshwork of cellulose fibrils. The internal organization of TEs was determined using secondary wall fragments generated by sonication. Atomic force microscopy revealed that the resulting rings, spirals, and reticulate structures were composed of fibrils arranged in parallel. Based on these combined results, we generated an architectural model of Zinnia TEs composed of three layers: an outermost granular layer, a middle primary wall composed of a meshwork of cellulose fibrils, and inner secondary wall thickenings containing parallel cellulose fibrils. In addition to insights in plant biology, studies using Zinnia TEs could prove especially productive in assessing cell wall responses to enzymatic and microbial degradation, thus aiding current efforts in lignocellulosic biofuel production.

Atomic force microscopy of biological membranes

Atomic force microscopy (AFM) is an ideal method to study the surface topography of biological membranes. It allows membranes that are adsorbed to flat solid supports to be raster-scanned in physiological solutions with an atomically sharp tip. Therefore, AFM is capable of observing biological molecular machines at work. In addition, the tip can be tethered to the end of a single membrane protein, and forces acting on the tip upon its retraction indicate barriers that occur during the process of protein unfolding. Here we discuss the fundamental limitations of AFM determined by the properties of cantilevers, present aspects of sample preparation, and review results achieved on reconstituted and native biological membranes.

Mapping of proteomic composition on the surfaces of bacillus spores by atomic force microscopy-based immunolabeling

Atomic force microscopy (AFM) provides a unique capability to image high-resolution architecture and structural dynamics of pathogens (e.g., viruses, bacteria, and bacterial spores) at near-molecular resolution in native conditions. Further development of atomic force microscopy to enable the correlation of pathogen protein surface structures with specific gene products is essential to understand the mechanisms of the pathogen life cycle. We applied an AFM-based immunolabeling technique for the proteomic mapping of macromolecular structures through the visualization of the binding of antibodies, conjugated with nanogold particles, to specific epitopes on Bacillus spore surfaces. This information is generated while simultaneously acquiring the surface morphology of the pathogen. The immunospecificity of this labeling method was established through the utilization of specific polyclonal and monoclonal antibodies that target spore coat and exosporium epitopes of Bacillus atrophaeus and Bacillus anthracis spores.

Fully automated single-molecule force spectroscopy for screening applications

With the introduction of single-molecule force spectroscopy (SMFS) it has become possible to directly access the interactions of various molecular systems. A bottleneck in conventional SMFS is collecting the large amount of data required for statistically meaningful analysis. Currently, atomic force microscopy (AFM)-based SMFS requires the user to tediously 'fish' for single molecules. In addition, most experimental and environmental conditions must be manually adjusted. Here, we developed a fully automated single-molecule force spectroscope. The instrument is able to perform SMFS while monitoring and regulating experimental conditions such as buffer composition and temperature. Cantilever alignment and calibration can also be automatically performed during experiments. This, combined with in-line data analysis, enables the instrument, once set up, to perform complete SMFS experiments autonomously.

Past, present and future of atomic force microscopy in life sciences and medicine

To introduce this special issue of the Journal of Molecular Recognition dedicated to the applications of atomic force microscopy (AFM) in life sciences, this paper presents a short summary of the history of AFM in biology. Based on contributions from the first international conference of AFM in biological sciences and medicine (AFM BioMed Barcelona, 19-21 April 2007), we present and discuss recent progress made using AFM for studying cells and cellular interactions, probing single molecules, imaging biosurfaces at high resolution and investigating model membranes and their interactions. Future prospects in these different fields are also highlighted.

High-speed atomic force microscopy for observing dynamic biomolecular processes

The atomic force microscope (AFM) is unique in its capability to capture high-resolution images of biological samples in liquids. This capability will become more valuable to biological sciences if AFM additionally acquires an ability of high-speed imaging, because 'direct and real-time visualization' is a straightforward and powerful means to understand biomolecular processes. With conventional AFMs, it takes more than a minute to capture an image, while biomolecular processes generally occur on a millisecond timescale or less. In order to fill this large gap, various efforts have been carried out in the past decade. Here, we review these past efforts, describe the current state of the capability and limitations of high-speed AFM, and discuss possibilities that may break the limitations and lead to the development of a truly useful high-speed AFM for biological sciences.

Direct visualization of KirBac3.1 potassium channel gating by atomic force microscopy

KirBac3.1 belongs to a family of transmembrane potassium (K(+)) channels that permit the selective flow of K-ions across biological membranes and thereby regulate cell excitability. They are crucial for a wide range of biological processes and mutations in their genes cause multiple human diseases. Opening and closing (gating) of Kir channels may occur spontaneously but is modulated by numerous intracellular ligands that bind to the channel itself. These include lipids (such as PIP(2)), G-proteins, nucleotides (such as ATP) and ions (e.g. H(+), Mg(2+), Ca(2+)). We have used high-resolution atomic force microscopy (AFM) to examine KirBac3.1 in two different configurations. AFM imaging of the cytoplasmic surface of KirBac3.1 embedded in a lipid bilayer has allowed visualization of the tetrameric assembly of the ligand-binding domain. In the absence of Mg(2+), the four subunits appeared as four protrusions surrounding a central depression corresponding to the cytoplasmic pore. They did not display 4-fold symmetry, but formed a dimer-of-dimers with 2-fold symmetry. Upon addition of Mg(2+), a marked rearrangement of the intracellular ligand-binding domains was observed: the four protrusions condensed into a single protrusion per tetramer, and there was an accompanying increase in protrusion height. The central cavity within the four intracellular domains also disappeared on addition of Mg(2+), indicating constriction of the cytoplasmic pore. These structural changes are likely transduced to the transmembrane helices, which gate the K(+) channel. This is the first time AFM has been used as an interactive tool to study K(+) channels. It has enabled us to directly measure the conformational changes in the protein surface produced by ligand binding.

Atomic force microscopy of protein films and crystals

A customized atomic force microscopy (AFM) instrument optimized for imaging protein crystals in solution is described. The device was tested on crystals and Langmuir-Blodgett (LB) films of two proteins with quite different molecular weights. This approach enables the periodicity and morphology of crystals to be studied in their mother liquid, thereby preserving the native periodic protein crystal structure, which is typically destroyed by drying. Moreover, the instrument appears to distinguish protein crystals from salt crystals, which under the optical microscope are frequently quite similar, the difference between them often being revealed only during x-ray analysis. AFM estimates of the packing, order, and morphology of the given single proteins appear quite similar in the LB thin film and in the crystals, which means that routine crystal measurements can be performed at high resolution. The AFM consists of a custom-built measuring head and a homemade flexible SPM controller which can drive the head for contact, noncontact and spectroscopy modes, thus providing the user with a high degree of customization for crystal measurement.

Atomic force spectroscopy on poly(o-ethoxyaniline) nanostructured films: sensing nonspecific interactions

Atomic force spectroscopy (AFS) was used to measure interaction forces between the tip and nanostructured layers of poly(o-ethoxyaniline) (POEA) in pure water and CuSO4 solutions. When the tip approach and retraction were carried out at low speeds, POEA chains could be physisorbed onto the Si3N4 tip via nonspecific interactions. We conjecture that while detaching, POEA chains were stretched and the estimated chain lengths were consistent with the expected values from the measured POEA molecular weight. The effects from POEA doping could be investigated directly by performing AFS measurements in a liquid cell, with the POEA film exposed to liquids of distinct pH values. For pH > or = 6.0, the force curves normally displayed an attractive region for POEA, but at lower pH values-where POEA is protonated-the repulsive double-layer forces dominated. Measurements in the liquid cell could be further exploited to investigate how the film morphology and the force curve are affected when impurities are deliberately introduced in the liquid. The shape of the force curves and the film morphology depended on the concentration of heavy metal in the liquid cell. AFS may therefore be used to study the interaction between film and analyte, with important implications for the understanding of mechanisms governing the sensing ability of taste sensors.

One century of progress in neuroscience founded on Golgi and Cajal's outstanding experimental and theoretical contributions

Since the discovery and mapping of the neuronal circuits of the brain by Golgi and Cajal neuroscientists have clearly spelled the fundamental questions which should be answered to delineate the arena for a scientific understanding of brain function: How neurons communicate with each other in a network? Is there some basic principle according to which brain networks are organised? Is it possible to map out brain regions specialised in carrying out some specific task? As far as the first point is concerned it is well known that Golgi and Cajal had opposite views on the interneuronal communication. Golgi suggested protoplasmic continuity and/or electrotonic spreading of currents between neurons. Cajal proposed the so-called "neuron doctrine", which maintained that neurons could communicate only via a specialised region of contiguity, namely the synapse. The present paper has the first and second points as main topics and last century progresses in these fields are viewed as developments of Golgi and Cajal's findings and above all, hypotheses. Thus, we will briefly discuss these topics moving from the transmitter based mapping, which brought neurochemistry into the Golgi-Cajal mapping of the brain with silver impregnation techniques. The mapping of transmitter-identified neurons in the brain represents one of the major foundations for neuropsychopharmacology and a reference frame for the biochemical and behavioural investigations of brain function. Biochemical techniques allowed giving evidence for multiple transmission lines in synapses interacting via receptor-receptor interactions postulated to be based on supramolecular aggregates, called receptor mosaics. Immunocytochemical and autoradiographic mapping techniques allowed the discovery of extra-synaptic receptors and of transmitter-receptor mismatches leading to the introduction of the volume transmission concept by Agnati-Fuxe teams. The Volume Transmission theory proposed the existence of a three-dimensional diffusion of e.g. transmitter and ion signals, released by any type of cell, in the extra-cellular space and the cerebrospinal fluid of the brain. Thus, a synthesis between Golgi and Cajal's views became possible, by considering two main modes of intercellular communication: volume transmission (VT) and wiring transmission (WT) (a prototype of the latter one is synaptic transmission) and two types of networks (cellular and molecular networks) in the central nervous system. This was the basis for the suggestion of two fundamental principles in brain morphological and functional organisation, the miniaturisation and hierarchic organisation. Finally, moving from Apathy's work, a new model of brain networks has recently been proposed. In fact, it has been proposed that a network of fibrils enmeshes the entire CNS forming a global molecular network (GMN) superimposed on the cellular networks.

Spore coat architecture of Clostridium novyi NT spores

Spores of the anaerobic bacterium Clostridium novyi NT are able to germinate in and destroy hypoxic regions of tumors in experimental animals. Future progress in this area will benefit from a better understanding of the germination and outgrowth processes that are essential for the tumorilytic properties of these spores. Toward this end, we have used both transmission electron microscopy and atomic force microscopy to determine the structure of both dormant and germinating spores. We found that the spores are surrounded by an amorphous layer intertwined with honeycomb parasporal layers. Moreover, the spore coat layers had apparently self-assembled, and this assembly was likely to be governed by crystal growth principles. During germination and outgrowth, the honeycomb layers, as well as the underlying spore coat and undercoat layers, sequentially dissolved until the vegetative cell was released. In addition to their implications for understanding the biology of C. novyi NT, these studies document the presence of proteinaceous growth spirals in a biological organism.

Aminosulfonate Modulated pH-induced Conformational Changes in Connexin26 Hemichannels

Gap junction channels regulate cell-cell communication by passing metabolites, ions, and signaling molecules. Gap junction channel closure in cells by acidification is well documented; however, it is unknown whether acidification affects connexins or modulating proteins or compounds that in turn act on connexins. Protonated aminosulfonates directly inhibit connexin channel activity in an isoform-specific manner as shown in previously published studies. High-resolution atomic force microscopy of force-dissected connexin26 gap junctions revealed that in HEPES buffer, the pore was closed at pH < 6.5 and opened reversibly by increasing the pH to 7.6. This pH effect was not observed in non-aminosulfonate buffers. Increasing the protonated HEPES concentration did not close the pore, indicating that a saturation of the binding sites occurs at 10 mM HEPES. Analysis of the extracellular surface topographs reveals that the pore diameter increases gradually with pH. The outer connexon diameter remains unchanged, and there is a approximately 6.5 degrees rotation in connexon lobes. These observations suggest that the underlying mechanism closing the pore is different from an observed Ca2+-induced closure.

The supramolecular architecture of junctional microdomains in native lens membranes

Gap junctions formed by connexons and thin junctions formed by lens-specific aquaporin 0 (AQP0) mediate the tight packing of fibre cells necessary for lens transparency. Gap junctions conduct water, ions and metabolites between cells, whereas junctional AQP0 seems to be involved in cell adhesion. High-resolution atomic force microscopy (AFM) showed the supramolecular organization of these proteins in native lens core membranes, in which AQP0 forms two-dimensional arrays that are surrounded by densely packed gap junction channels. These junctional microdomains simultaneously provide adhesion and communication between fibre cells. The AFM topographs also showed that the extracellular loops of AQP0 in junctional microdomains adopt a conformation that closely resembles the structure of junctional AQP0, in which the water pore is thought to be closed. Finally, time-lapse AFM imaging provided insights into AQP0 array formation. This first high-resolution view of a multicomponent eukaryotic membrane shows how membrane proteins self-assemble into functional microdomains.

Nanomechanics of Hemichannel Conformations

Gap junctional hemichannels mediate cell-extracellular communication. A hemichannel is made of six connexin (Cx) subunits; each connexin has four transmembrane domains, two extracellular loops, and cytoplasmic amino- and carboxyl-terminals (CTs). The extracellular domains are arranged differently at non-junctional and junctional (gap junction) regions, although very little is known about their flexibility and conformational energetics. The cytoplasmic tail differs considerably in the size and amino acid sequence for different connexins and is predicted to be involved in the channel open and closed conformations. For large connexins, such as Cx43, the CT makes large cytoplasmic fuzz visible under electron microscopy. If this CT domain controls channel permeability by physical occlusion of the pore mouth, movement of this portion could open or close the channel. We used atomic force microscopy-based single molecule spectroscopy with antibody-modified atomic force microscopy tips and connexin mimetic peptide modified tips to examine the flexibility of extracellular loop and CT domains and to estimate the energetics of their movements. Antibody to the CT portion closer to the membrane stretches the tail to a shorter length, and the antibody to CT tail stretches the tail to a longer length. The stretch length and the energy required for stretching the various portions of the carboxyl tail support the ball and chain model for hemichannel conformational changes.

The atomic force microscope as a tool for studying phase separation in lipid membranes

Atomic force microscopy has developed into a powerful tool in the study of phase separation in lipid bilayers. Its ability to image a semi-fluid surface under buffer at nanometre lateral resolution and Angstrom resolution vertically allows us to distinguish phase separated lipid domains, models of the elusive rafts postulated to exist as functional platforms in the cellular membrane, which may only rise 0.3 nm above the surrounding membrane. This review charts the history of this development, and includes a description of sample preparation techniques, factors affecting image contrast mechanisms, its use in the investigation of the pre-transition ripple phase, and in the localization of cell surface proteins.

Scanning probe technology in metalloprotein and biomolecular electronics

The interfacing of man-made electronic components with specifically-folded biomacromolecules lies central not only to the development of sensory interfaces and potential new molecular-scale devices, but also enables us to analyse processes of great biological importance in a refined and controllable manner. Recent advances in both available technology, most notably optical and scanning probes in nature, and our understanding of suitable methodologies, have led us to the point where the characteristics of single biological molecules can be interrogated with good levels of reproducibility. We review here the application of scanning probe microscopy to the analysis of and experimentation on biological redox systems. Within this paper the tunnel transport characteristics, as assayed by both scanning tunnelling microscopy (STM) and conducting probe atomic force microscopy (AFM), of single metalloproteins are discussed. In a specific case study the electron transfer characteristics of the blue copper metalloprotein, azurin, are reported. The modulation of these properties under the influence of calibratable compressional force has also been examined in some detail. Work such as this enables one to reproducibly establish the conductance, barrier height, environmental sensitivity and electromechanical properties of these molecules.

Imaging and detecting molecular interactions of single transmembrane proteins

Single-molecule atomic force microscopy (AFM) provides novel ways to characterize structure-function relationships of native membrane proteins. High-resolution AFM-topographs allow observing substructures of single membrane proteins at sub-nanometer resolution as well as their conformational changes, oligomeric state, molecular dynamics and assembly. Complementary to AFM imaging, single-molecule force spectroscopy experiments allow detecting molecular interactions established within and between membrane proteins. The sensitivity of this method makes it possible to detect the interactions that stabilize secondary structures such as transmembrane alpha-helices, polypeptide loops and segments within. Changes in temperature or protein-protein assembly do not change the position of stable structural segments, but influence their stability established by collective molecular interactions. Such changes alter the probability of proteins to choose a certain unfolding pathway. Recent examples have elucidated unfolding and refolding pathways of membrane proteins as well as their energy landscapes. We review current and future potential of these approaches to reveal insights into membrane protein structure, function, and unfolding as we recognize that they could help answering key questions in the molecular basis of certain neuro-pathological dysfunctions.

Watching the components of photosynthetic bacterial membranes and their in situ organisation by atomic force microscopy

The atomic force microscope has developed into a powerful tool in structural biology allowing information to be acquired at submolecular resolution on the protruding structures of membrane proteins. It is now a complementary technique to X-ray crystallography and electron microscopy for structure determination of individual membrane proteins after extraction, purification and reconstitution into lipid bilayers. Moving on from the structures of individual components of biological membranes, atomic force microscopy has recently been demonstrated to be a unique tool to identify in situ the individual components of multi-protein assemblies and to study the supramolecular architecture of these components allowing the efficient performance of a complex biological function. Here, recent atomic force microscopy studies of native membranes of different photosynthetic bacteria with different polypeptide contents are reviewed. Technology, advantages, feasibilities, restrictions and limits of atomic force microscopy for the acquisition of highly resolved images of up to 10 A lateral resolution under native conditions are discussed. From a biological point of view, the new insights contributed by the images are analysed and discussed in the context of the strongly debated organisation of the interconnected network of membrane-associated chlorophyll-protein complexes composing the photosynthetic apparatus in different species of purple bacteria.