Catalytic oxidation of volatile organic compounds over supported noble metal and single atom catalysts: A review

Volatile organic compounds (VOCs) exhausted from industrial processes are the major atmospheric pollutants, which could destroy the ecological environment and make hazards to human health seriously. Catalytic oxidation is regarded as the most competitive strategy for the efficient elimination of low-concentration VOCs. Supported noble metal catalysts are preferred catalysts due to their excellent low-temperature catalytic activity. To further lower the cost of catalysts, single atom catalysts (SAC) have been fabricated and extensively studied for application in VOCs oxidation due to their 100 % atom-utilization efficiency and unique catalytic performance. In this review, we comprehensively summarize the recent advances in supported noble metal (e.g., Pt, Pd, Au, and Ag) catalysts and SAC for VOCs oxidation since 2015. Firstly, this paper focuses on some important influencing factors that affect the activity of supported noble metal catalysts, including particle size, valence state and dispersion of noble metals, properties of the support, metal oxide/ion modification, preparation method, and pretreatment conditions of catalysts. Secondly, we briefly summarize the catalytic performance of SAC for typical VOCs. Finally, we conclude the key influencing factors and provide the prospects and challenges of VOCs oxidation.

Electron Withdrawal from Methane by Pt Atoms on Stannic Oxide for Highly Active Low-Temperature Combustion

Supported Pt catalysts often exhibit limited effectiveness in achieving complete methane oxidation, which restricts their commercial application. However, Pt catalysts are particularly attractive, especially in sulfur-containing environments, where commercial Pd catalysts are more susceptible to sulfur poisoning. Therefore, developing highly active Pt sites and gaining a deeper understanding of the intrinsic mechanisms governing methane combustion over Pt catalysts is essential. In this study, we present a highly active stannic oxide supported platinum catalyst (Pt/SnO2) for stable low-temperature methane combustion, achieving a T90 as low as 390 °C at a high gas hourly space velocity (GHSV) of 60,000 mL·gcat-1·h-1. This performance surpasses that of most other Pt catalysts as well as Pd/SnO2 and benchmark Pd/Al2O3. The superior SO2 tolerance of Pt/SnO2 was demonstrated by the stability of methane conversion at 500 °C, with only a minor reduction observed during the long-term online test. Characterization results indicate that the Pt atoms on SnO2 are electron-deficient and predominantly adopt a crowded configuration. In situ studies and density functional theory (DFT) calculations reveal that the electron-deficient, crowded Pt atoms enhance the chemisorption of CH4 molecules by withdrawing the electrons from CH4, resulting in activated CH4 with an elongated C-H bond. This work provides an in-depth understanding of the nature of Pt active sites for high-performance methane combustion, offering valuable insights for the rational design of Pt-based catalysts.

Unraveling the Cause of Strong Metal-Support Interaction Formation: Disparities in Metal Nanoparticle Anchoring Mechanisms

Strong metal-support interaction (SMSI) can be normally induced by the surface free energy differences between metal nanoparticles and supports. To gain deeper insights into the effect of SMSI on heterogeneous catalysis, we use prototype Pt, Pd/TiO2(anatase) systems to demonstrate different reverse water gas shift (RWGS) reaction activity changes, especially with increasing the metal nanoparticle (NP) loading. Our experiments show that the conventional surface-free-energy change law regarding the incremental NP size is no longer applicable to these systems due to the overlook of the change of support properties owing to the disparities of the metal anchoring mechanisms. Both experimental measurements and density functional theory (DFT) calculations show that Pt atoms strongly favor anchoring on the oxygen vacancies (Ov) over the OH-sites on the anatase TiO2 support. In contrast, Pd atoms lack such Ov-site preference compared to Pt atoms, thereby leaving higher content of Ov on the support than the Pt counterpart. Moreover, high density of residual Ov on the support can cause the Pd NPs to be in higher degree of contact with the support, either in NP-encapsulation state (experiment) or NP-spreading state (simulation). The enhanced CO2 conversion of Pt/TiO2A is attributed to the synergistic effect of Ov and hydrogen spillover from Pt sites.

Theory-Guide Design of Integrative Catalytic Pairs for Urea Synthesis from Nitrate and Carbon Dioxide

Electrochemical coreduction of carbon dioxide and nitrate offers a sustainable pathway to synthesize value-added urea from greenhouse gas and nitrogen-containing waste; however, challenges remain in designing efficient catalysts. Based on the concept of "integrative catalytic pairs (ICPs)", a catalyst for urea synthesis is designed by introducing heteroatoms (B and C) into M-N-C, where a single transition metal is dispersed on N-doped carbon material. Using a two-step theoretical screening strategy, Ni-N3B is identified as a promising catalyst for urea synthesis, with a low limiting potential (-0.43 V) and a small kinetic barrier for C-N coupling (0.74 eV) due to the electronic regulation effects and the synergy of Ni and B function for enhancing NO3- activation and facilitating C-N coupling between gaseous CO2 and *NH intermediate. Under the guidance of these theoretical results, our further experimental validation demonstrates that the synthesized Ni-N3B catalyst achieves a Faradaic efficiency of 51.92% and a urea yield rate of 32.30 mmol h-1 g-1 at -0.6 V vs RHE. Our work not only identifies an efficient urea synthesis catalyst without relying on trial-and-error methods but also inspires further exploration of ICPs-based catalysts in electrocatalysis.

Effect of Rh Loading on the Performance of Rh/CeO2 in CH4 Combustion: Important Role of Forming RhO x Nanoparticles

In order to avoid the emission of CH4 into the air, catalytic combustion of CH4 is a practical solution, but it is challenging to develop efficient catalysts due to the inertness of CH4. Herein, Rh/CeO2 catalysts with different Rh loadings were synthesized and compared. The catalytic activities in CH4 oxidation were found to increase with an increase of Rh loading. Thus, 0.3Rh/CeO2 (with 0.3 wt % Rh) and 2.0Rh/CeO2 (with 2.0 wt % Rh) were chosen as representatives to study the difference. It was found that the Rh species exist as Rh single atoms with a valence of +3 in 0.3Rh/CeO2, and there are RhO x nanoparticles showing the coexistence of Rh3+ and Rhδ+ in 2.0Rh/CeO2. Theoretical calculations show that, in the CeO2-supported RhO x nanoparticles catalyst, the band gap between the highest occupied band orbital and the lowest unoccupied band orbital of CeO2 is filled with the Rh density of state, while there remains a gap of ∼0.6 eV for the single-atom catalyst. The smaller gap between the highest occupied band orbitals and the lowest unoccupied band orbitals makes the RhO x nanoparticles more favorable for electron transfer than the single-atom catalyst, resulting in a lower energy barrier in C-H bond activation and higher catalytic activity. This work provides a rationale for developing high-activity catalysts for CH4 oxidation.

A self-regenerating Pt/Ge-MFI zeolite for propane dehydrogenation with high endurance

Supported noble metal cluster catalysts are typically operated under severe conditions involving switching between reducing and oxidizing atmospheres, causing irreversible transformation of the catalyst structure and thereby leading to permanent deactivation. We discovered that various platinum (Pt) precursors spontaneously disperse in a germanium-MFI (Ge-MFI) zeolite, which opposes the Ostwald ripening phenomenon, producing self-regenerating Pt/Ge-MFI catalysts for propane dehydrogenation. These catalysts reversibly switch between Pt clusters and Pt single atoms in response to reducing reaction and oxidizing regeneration conditions. This environmental adaptability allows them to completely self-regenerate over 110 reaction and regeneration cycles in propane dehydrogenation, and they exhibited unprecedented sintering resistance when exposed to air at 800°C for 10 days. Such spontaneous metal dispersion in a Ge-MFI zeolite is a robust and versatile methodology for fabricating various rhodium, ruthenium, iridium, and palladium cluster catalysts.

Unraveling the Unique Behavior of Atomically Dispersed Pt on Zeolite Fe-DeAlBEA for Catalyzing Propane Dehydrogenation with Cofed Hydrogen

Propene, used on a large scale to manufacture polypropylene and several commodity chemicals, is increasingly produced by catalytic propane dehydrogenation (PDH). Atomically dispersed Pt has emerged as a promising candidate catalyst for PDH; however, stabilizing atomically dispersed Pt at high temperatures is challenging. Here, we demonstrate the use of dealuminated zeolite beta with a high Fe content as a host for stabilizing isolated Pt, which is anchored strongly to the zeolite support by Pt-Fe bonds. The isolated Pt-Fe sites exhibit promising PDH performance, including a high apparent forward rate coefficient for propene formation (404.8-26.4 mol propene/mol Pt·bar·s) and a high selectivity (≥96%) at 823 K in the presence of H2. Kinetics data characterizing the rate of PDH with a range of Pt loadings show that atomically dispersed Pt catalyzes propene formation at rates independent of H2 partial pressure, whereas metallic Pt clusters, formed at high Pt loadings, catalyze the reaction with a slightly negative dependence on H2 partial pressure. The shift in Pt speciation with Pt loading, confirmed by infrared spectroscopy of adsorbed CO, X-ray absorption spectroscopy, and high-angle angular dark field scanning transmission electron microscopy, suggests that the observed change in kinetics with Pt dispersion is a consequence of a change in the reaction mechanism.

Data-driven discovery of Pt single atom embedded germanosilicate MFI zeolite catalysts for propane dehydrogenation

Zeolite-confined metal is an important class of heterogeneous catalysts, demonstrating exceptional catalytic performance in many reactions, but the identification of a stable metal-zeolite combination with a simple synthetic method remains a top challenge. Here artificial intelligence methods, particularly global neural network potential based large-scale atomic simulation, are utilized to design Pt-containing zeolite frameworks for propane-to-propene conversion. We show that out of the zeolite database (>220 structure framework) and more than 100,000 Pt/Ge differently distributed configurations, there are only three Ge-containing zeolites, germanosilicate (MFI, IWW and SAO) that are predicted to be capable of stabilizing Pt single atom embedded in zeolite skeleton and at the meantime allowing propane fast diffusion. Among, the Pt1@Ge-MFI catalyst is successfully synthesized via a simple one-pot synthesis without a lengthy post-treatment procedure, and characterized by high-resolution experimental techniques. We demonstrate that the catalyst features an in-situ formed [GePtO3H2] active site under the reductive reaction condition that can achieve long-term (>750 h) high activity and selectivity (98%) for propane dehydrogenation. Our simple catalyst synthesis holds promise for scale-up industrial applications that can now be rooted in first principles via data-driven catalyst design.

Plasmonic Charge Localization and C-H Activation at Single-Atom Sites in Dilute Copper Platinum Alloys

The role of energy transfer in plasmonic alloys is critical for advancing photocatalysis to industrially and societally relevant chemical processes. In this study, we synthesized and characterized CuPt dilute alloy catalysts to explore the impact of dopant concentration on energy transfer in plasmon-assisted nonoxidative propane dehydrogenation. By leveraging the localized surface plasmon resonance (LSPR) in copper nanoparticles, we examined how single-atom and ensemble Pt sites influence (photo)catalytic performance. In situ diffuse reflectance infrared Fourier transform spectroscopy, along with kinetic analysis of photocatalytic experiments, provided evidence that Pt single-atom sites enhance nonthermal charge carrier generation and energy transfer processes, accelerating C-H scission, resulting in a significant increase in light-driven reaction rates compared to CuPt alloys with ensemble Pt sites. The photochemical enhancement enabled by dilute plasmonic alloys is proposed to result from transient oxidative potentials (i.e., hot holes) localized on isolated dopant sites. These findings demonstrate the potential of engineering active sites in dilute plasmonic alloys for tailored electronic properties, paving the way for broader applications in plasmonic photocatalysis.

Imaging Gas-Involved Structural Dynamics by Environmental Electron Microscopy

Understanding gas-involved physicochemical reactions is undoubtedly one of the most significant challenges in the modern chemical industry. To clarify how those reactions precede requires deep insights into the real-time visualization of reaction dynamics within a gas environment. The emergence and rapid development of in situ environmental electron microscopy (EEM) including scanning electron microscopy (ESEM) and transmission electron microscopy (ETEM) have enabled multiscale observation of dynamic gas-involved physicochemical reactions. This review examines the state-of-art EEM technologies, categorizing those gas reactions into various physical and chemical processes and detailing the corresponding dynamic behaviors. It begins by reviewing the state-of-the-art EEM techniques and is followed by detailing their application in typical physical processes. It clarifies physical vapor condensation, deposition, and geometric reshaping with gaseous involving. More importantly, all the gas-involved chemical reactions into electrochemical reactions, thermochemical reactions, chemical crystal growth, and catalytic reactions are thoroughly explored and categorized. Finally, the review highlights the technical challenges and valuable perspectives provided by in situ EEM for addressing critical gas-involved issues. Overall, this article offers a multiscale and comprehensive understanding of the physicochemical origins associated with gas-involved reactions, envisioning fundamental strategies for designing high-performance gas-involved functional materials.

The Significance of the 'Insignificant': Non-covalent Interactions in CO2 Reduction Reactions with 3C-TM (TM=Sc-Zn) Single-Atom Catalysts

With energy shortages and excessive CO2 emissions driving climate change, converting CO2 into high-value-added products offers a promising solution for carbon recycling. We investigate CO2 reduction reactions (CO2RR) catalyzed by 10 single-atom catalysts (SACs), incorporating weak non-covalent interactions, specifically lone pair-π and H-π interactions. The SACs, consisting of transition metals coordinated by three carbon atoms in a defective graphene substrate (3C-TM, TM=Sc-Zn), leverage these interactions to influence the energy fluctuations of intermediates and the limiting potentials of CO2RR, without altering the overall reaction pathway. Our findings show that SACs based on early transition metals (Sc, Ti, V, Cr) can serve as catalysts for C1 products, including HCOOH, HCHO, CH3OH, and CH4, while those based on Fe and Co are suitable for CO formation. Driving force analysis helps bridge theoretical results with experimental observations and propose a modified approach for assessing hydrogen evolution reactions (HER) competition. SACs based on Ni and Cu exhibit moderate HER tolerance, while early transition metals excel in selective CO2 reduction. We also identify a linear scaling relationship between the free energies of *COOH and *CO. This study offers valuable insights for future experimental studies and large-scale computational screenings.

Ideal Bifunctional Catalysis for Propane Dehydrogenation over Pt-Promoted Gallia-Alumina and Minimized Use of Precious Elements

Gallia-alumina (GaxAl2-xO3), promoted with a trace amount of Pt, exhibits excellent activity and selectivity in propane dehydrogenation (PDH) due to a bifunctional mechanism. Tetrahedrally coordinated Ga (GaIV) catalyzes C-H dissociation, while Pt facilitates H recombination into H2. To maximize the utilization of precious Pt and Ga, it is crucial to understand the optimal balance between the two catalytic functions or determine the 'ideal regime.' Here, we developed techniques to quantify the catalytic functions of Pt and GaIV sites. H2-D2 exchange rates (rHD) and propylene chemisorption (Q(GaIV,surf)) were used as effective measures of the catalytic functions of Pt and GaIV, respectively. When Pt is sufficient relative to GaIV (rHD/Q(GaIV,surf) ratio >0.3 molHD molGaIV,surf-1 s-1), the catalysts exhibit ideal catalytic properties. During repeated reaction and regeneration cycles, the catalysts deactivated mainly due to Pt sintering, which leads to an imbalance between the two catalytic functions. Notably, catalysts with higher Pt contents lost catalytic activity faster than those with lower Pt contents, eventually exhibiting reversed activities. This is because increased Pt loading facilitates sintering. Doping a small amount of Ce3+ onto GaxAl2-xO3 effectively suppresses Pt sintering via strong metal-support interaction. Thus, optimal loadings of Ga and Pt, combined with Ce3+ doping to stabilize Pt, enabled the minimized use of precious elements while maintaining excellent catalytic properties. Even with 100 ppm Pt and 1 wt % Ga, the catalyst exhibited superior activity, selectivity, and stability compared to the benchmark catalyst, PtSn/γ-Al2O3, with 7000 ppm (0.7 wt %) Pt.

Research Progress and Perspectives on Anti-Poisoning Hydrogen Oxidation Reaction Electrocatalysts for Hydrogen Fuel Cells

As global demand for clean and sustainable energy continues to rise, fuel cell technology has seen rapid advancement. However, the presence of trace impurities like carbon monoxide (CO) and hydrogen sulfide (H₂S) in hydrogen fuel can significantly deactivate the anode by blocking its active sites, leading to reduced performance. Developing electrocatalysts that are resistant to CO and H₂S poisoning has therefore become a critical priority. This paper provides a comprehensive analysis of the poisoning mechanisms of CO and H₂S and reviews the key strategies developed over the past few decades to enhance the impurity tolerance of anode electrocatalysts. It begins by examining the differences in hydrogen oxidation reaction (HOR) mechanisms in acidic and alkaline environments, focusing on the roles of hydrogen binding energy (HBE) and hydroxide binding energy (OHBE). Next, it outlines three main approaches to mitigate CO poisoning: (I) bifunctional mechanisms, (II) direct mechanisms, and (III) constructing protective blocking layers. The review then shifts to strategies for countering H₂S poisoning, emphasizing both electrocatalyst design and structural improvements in fuel cells. Finally, the paper highlights recent advances in anti-poisoning electrocatalysts, discusses their applications and limitations, and identifies the key challenges and future opportunities for further research in this field.

Constructing SiO2-Supported Atomically Dispersed Platinum Catalysts with Single-Atom and Atomic Cluster Dual Sites to Tame Hydrogenation Performance

Construction and optimization of stable atomically dispersed metal sites on SiO2 surfaces are important yet challenging topics. In this work, we developed the amino group-assisted atomic layer deposition strategy to deposit the atomically dispersed Pt on SiO2 support for the first time, in which the particle size and ratio of Pt entities from single atom (Pt1) to atomic cluster (Pt n ) and nanoparticle (Pt p ) on the SiO2 surface were well modulated. We demonstrated the importance of dual-site synergy for optimizing the activity of single-atom catalysts. The Pt1+n /SiO2-N catalysts with the coexistence of Pt1 and Pt n showed excellent activity and optimized selectivity (99% for haloanilines) in halonitrobenzenes hydrogenation, while Pt1/SiO2-N catalysts were almost inactive in the reaction. Mechanism investigation indicates that the Pt n site is beneficial for H2 dissociation, and the Pt1 site is energetically favorable for adsorption of the nitro group to complete the selective hydrogenation, which synergistically contributes to the optimized catalytic performances. This study provides a new strategy for constructing atomically dispersed metal species over the SiO2 support and demonstrates the significance of the synergy of dual active sites for enhancing the catalytic efficiency.

Asymmetric Coupled Binuclear-Site Catalysts for Low-Temperature Selective Acetylene Semi-Hydrogenation

Heterogeneous metal catalysts with bifunctional active sites are widely used in chemical industries. Although their improvement process is typically based on trial-and-error, it is hindered by the lack of model catalysts. Herein, we report an effective vacancy-pair capturing strategy to fabricate 12 heterogeneous binuclear-site catalysts (HBSCs) comprising combinations of transition metals on titania. During the synthesis of these HBSCs, proton-passivation treatment and step-by-step electrostatic anchorage enabled the suppression of single-atom formation and the successive capture of two target metal cations on the titanium-oxygen vacancy-pair site. Additionally, during acetylene hydrogenation at 20 °C, the HBSCs (e.g., Pt1Pd1-TiO2) consistently generated more than two times the ethylene produced by their single-atom counterparts (e.g., Pd1-TiO2). Furthermore, the Pt1Pd1 binuclear sites in Pt1Pd1-TiO2 were demonstrated to catalyze C2H2 hydrogenation via a bifunctional active-site mechanism: initially C2H2 chemisorb on the Pt1 site, then H2 dissociates and migrates from Pd1 to Pt1, and finally hydrogenation occurs at the Pt1-Pd1 interface.

Unveiling the Aggregation of M-N-C Single Atoms into Highly Efficient MOOH Nanoclusters during Alkaline Water Oxidation

M-N-C-type single-atom catalysts (SACs) are highly efficient for the electrocatalytic oxygen evolution reaction (OER). And the isolated metal atoms are usually considered real active sites. However, the oxidative structural evolution of coordinated N during the OER will probably damage the structure of M-N-C, hence resulting in a completely different reaction mechanism. Here, we reveal the aggregation of M-N-C materials during the alkaline OER. Taking Ni-N-C as an example, multiple characterizations show that the coordinated N on the surface of Ni-N-C is almost completely dissolved in the form of NO3 -, accompanied by the generation of abundant O functional groups on the surface of the carbon support. Accordingly, the Ni-N bonds are broken. Through a dissolution-redeposition mechanism and further oxidation, the isolated Ni atoms are finally converted to NiOOH nanoclusters supported by carbon as the real active sites for the enhanced OER. Fe-N-C and Co-N-C also have similar aggregation mechanism. Our findings provide unique insight into the structural evolution and activity origin of M-N-C-based catalysts under electrooxidative conditions.

Tandem Upgrading of Bio-Furans to Benzene, Toluene, and p-xylene by Pt1Sn1 Intermetallic Coupling Ordered Mesoporous SnO2 Catalyst

Benzene, toluene, and p-xylene (BTpX) are among the most important commodity chemicals, but their productions still heavily rely on fossil resources and thus pose serious environmental burdens and energy crisis. Herein, the tandem upgrading of bio-furans is reported to high-yield BTpX by rationally constructing a versatile Pt1Sn1 intermetallic coupling ordered-mesoporous SnO2 (OM-SnO2) catalyst. It is shown that with increasing reduction temperature from 200 to 350 °C, Pt nanoparticles (NPs) are first formed on OM-SnO2, then converted to Pt3Sn1 intermetallic nanoparticles (iNPs), and finally to Pt1Sn1 iNPs with a gradually-thickened SnO2 overlayer. Impressively, the Pt1Sn1 iNPs and defect-rich OM-SnO2 in the optimized Pt@OM-SnO2 can serve as the highly-active species for the hydrogenolysis of 5-hydroxymethylfuran to 2,5-dimethylfuran and the aromatization of 2,5-dimethylfuran with acrylic acid to p-xylene, affording the highest yields of 99.1% and 96.1%, respectively. More importantly, it can perfectly realize the tandem upgrading of furan, furfural and 5-hydroxymethylfuran to benzene, toluene and p-xylene with high yields of 94.6%, 94.2% and 95.2%, respectively, representing a new tandem catalytic system to realize the high-yield BTpX productions from their corresponding bio-furans. This catalyst also shows good recyclability and excellent scalability, which together with its superior activity/selectivity suggest a high potential for sustainable BTpX productions.

Tuning the Selectivity in the Nonoxidative Alkane Dehydrogenation Reaction by Potassium-Promoted Zeolite-Encapsulated Pt Catalysts

The significance of the nonoxidative dehydrogenation of middle-chain alkanes into corresponding alkenes is increasing in the context of the world's declining demands on transportation fuels and the growing demand for chemicals and materials. The middle-chain alkenes derived from the dehydrogenation reaction can be transformed into value-added chemicals in downstream processes. Due to the presence of multiple potential reaction sites, the reaction mechanism of the dehydrogenation of middle-chain alkanes is more complicated than that in the dehydrogenation of light alkanes, and there are few prior studies on elucidating their detailed structure-reactivity relationship. In this work, we have employed Pt catalysts encapsulated in pure-silica MFI zeolite crystallites as model catalysts and studied how the catalytic performances for dehydrogenation of n-pentane can be modulated by the K+ promotor in the Pt-MFI catalyst. A combination of comprehensive structural characterizations by aberration-corrected electron microscopy, X-ray absorption spectroscopy, in situ CO-IR, X-ray photoelectron spectroscopy, and kinetic studies shows that K+ promoter can not only influence the particle size but also modify the electronic properties of Pt species, which further affect the activity and selectivity in the dehydrogenation of n-pentane.

Dynamic phase transitions dictate the size effect and activity of supported gold catalysts

The landmark discovery of gold catalysts has aroused substantial interest in heterogeneous catalysis, yet the catalytic mechanism remains elusive. For carbon monoxide oxidation on gold nanoparticles (NPs) supported on ceria surfaces, it is widely believed that carbon monoxide adsorbs on the gold particles, while the reaction occurs at the gold/ceria interface. Here, we have investigated the dynamic changes of supported gold NPs with various sizes in a carbon monoxide oxidation atmosphere using deep potential molecular dynamics simulations. Our results reveal that the structure of tiny gold particles in carbon monoxide atmospheres becomes highly disordered and undergoes phase transition. Such a liquid-like structure provides massive reactive sites, enabling facile carbon monoxide oxidation on the solid-state gold NP rather than just at the gold/ceria interface. This result is further corroborated by catalytic experiments. This work sheds light on both the size effects and activity in noble metal catalysis and provides insights for the design of more effective nanocatalysts.

Mapping and Optically Writing Nanogap Inhomogeneities in 1-D Extended Plasmonic Nanowire-on-Mirror Cavities

Tightly confined plasmons in metal nanogaps are highly sensitive to surface inhomogeneities and defects due to the nanoscale optical confinement, but tracking and monitoring their location is hard. Here, we probe a 1-D extended nanocavity using a plasmonic silver nanowire (AgNW) on mirror geometry. Morphological changes inside the nanocavity are induced locally using optical excitation and probed locally through simultaneous measurements of surface enhanced Raman scattering (SERS) and dark-field spectroscopy. The increasing molecular SERS intensity and corresponding redshift of cavity plasmon modes by up to 60 nm indicate atomic-scale changes inside the nanocavity. We correlate this to diffusion of silver atoms into the nanogap, which reduces the nanogap size and enhances the optical near-field, enhancing the SERS. These induced changes can be locally excited at specific locations along the length of the nanowire and remain stable and nonreversible. Polymer surface coating on the AgNW affects the power threshold for inducing atom migration and shows that strong polyvinylpyrrolidone (PVP)- Ag binding gives rise to higher power thresholds. Such extended nanogap cavities are an ideal system to provide robust SERS while withstanding high laser powers. These results provide insights into the inhomogeneities of NW nanocavities and pave the way toward spatially controlled NW lithography in ambient conditions.

Ni Cluster-Decorated Single-Atom Catalysts Achieve Near-Unity CO2-to-CO Conversion with an Ultrawide Potential Window of ≈1.7 V

Developing efficient electrocatalysts for CO2 reduction to CO within a broad potential range is meaningful for cascade application integration. In this work, hydrogen spillover is created and utilized to cultivate a proton-rich environment via the simple thermolysis of a Ni-doped Zn coordination polymer (Zn CPs (Ni)) to create asymmetric Ni single atoms co-located with adjacent Ni nanoclusters on nitrogen-doped carbon, termed as NiNC&SA/N-C, which expedites the hydrogenation of adsorbed CO2. Therefore, the sample demonstrates near-unity CO2-to-CO conversion efficiency under pH-universal conditions in ultra-wide potential windows: -0.39 to -2.05 V versus RHE with the current densities ranging from 0.1 to 1.0 A cm-2 in alkaline conditions, -0.83 to -2.40 V versus RHE from 0.1 to 0.9 A cm-2 in neutral environments, and -0.98 to -2.25 V versus RHE across 0.1 to 0.8 A cm-2 in acid conditions. Corresponding in situ measurements and density functional theory (DFT) calculations suggest that the enhanced H2O dissociation and more efficient hydrogen spillover on NiNC&SA/N-C (compared to NiSA/N-C) accelerate the protonation of adsorbed CO2 to form *COOH intermediates. This work emphasizes the significant role of proton spillover in CO2RR, opening novel avenues for designing high-performance catalysts applicable to various electrocatalytic processes.

Electronic structure modulation via single atom interfacial engineering for selective atmospheric CO2 photoreduction

Single-atom iridium was interfacially engineered on CuFeS2 quantum dots (QDs) with highly efficient CO2 photoreduction performance. The electronic structure modulation yielded a remarkable CO yield rate of 32.5 μmol g-1 h-1 with 92.2% selectivity under atmospheric conditions. This work demonstrates the potential of single-atom interfacial engineering for advancing CO2 photoreduction.

Regulating Atomically-Precise Pt Sites for Boosting Light-Driven Dry Reforming of Methane

Light-driven dry reforming of methane is a promising and mild route to convert two greenhouse gas into valuable syngas. However, developing facile strategy to atomically-precise regulate the active sites and realize balanced and stable syngas production is still challenging. Herein, we developed a spatial confinement approach to precisely control over platinum species on TiO2 surfaces, from single atoms to nanoclusters. The configuration comprising single atoms and sub-nanoclusters engenders pronounced electronic metal-support interactions, with resultant interfacial states prompting surface charge rearrangement. The unique geometric and electronic properties of these atom-cluster assemblies facilitate effective activation of CH4 and CO2, accelerating intermediate coupling and minimizing side reactions. Our catalyst exhibits an outstanding syngas generation rate of 34.41 mol gPt -1 h-1 with superior durability, displaying high apparent quantum yield of 9.1 % at 365 nm and turnover frequency of 1289 h-1. This work provides insightful understanding for exploring more multi-molecule systems at an atomic scale.

Two Different Atomically Dispersed Pt Atoms Supported on Ceria

Atomically dispersed metals on oxide supports with different distribution positions or coordination environments can dictate the reactivity; they have therefore attracted tremendous attention recently. Nonetheless, the acknowledging and understanding of different single atoms remain challenging due to the reactivity controversy of the supported single atoms and clusters or nanoparticles, particularly on the widely used ceria supports. Herein, by modulating the loading amount of Pt single atoms carefully with strong electrostatic adsorption on conventionally synthesized ceria supports, we obtained two different atomically dispersed Pt atoms with similar Pt-O coordination environments and CO adsorption characteristics. One is anchored on the surface of ceria, and it can migrate and aggregate once activated with reduction-reoxidation treatments. The other may be trapped by the surface defects or vacancies in ceria and would be fixed on the ceria support firmly in isolated states during activation. Despite the similar CO adsorption during the reaction, the former can catalyze CO oxidation in both the status of single atoms and aggregated PtOx clusters. However, the latter is inactive for the reaction and would not be affected by the activation treatment. It cannot involve the CO oxidation, resulting in the waste of supported Pt atoms.

An Active and Regenerable Nanometric High-Entropy Catalyst for Efficient Propane Dehydrogenation

Propane dehydrogenation (PDH) is crucial for propylene production, but commercially employed Pt-based catalysts face susceptibility to deactivation due to the Pt sintering during reaction and regeneration steps. Here, we report a SiO2 supported nanometric (MnCoCuZnPt) high-entropy PDH catalyst with high activity and stability. The catalyst exhibited a super high propane conversion of 56.6 % with 94 % selectivity of propylene at 600 °C. The propylene productivity reached 68.5 molC3H6 ⋅ gPt -1 ⋅ h-1, nearly three times that of Pt/SiO2 (23.5 molC3H6 ⋅ gPt -1 ⋅ h-1) under a weight hourly space velocity of 60 h-1. In a high-entropy nanoparticle, Pt atoms were atomically dispersed through coordination with other metals and exhibited a positive charge, thereby showcasing remarkable catalytic activity. The high-entropy effect contributes to the catalyst a superior stability with a low deactivation constant of 0.0004 h-1 during 200 hours of reaction under the industrial gas composition at 550 °C. Such high-entropy PDH catalyst is easy regenerated through simple air combustion of deposited coke. After the fourth consecutive regeneration cycle, satisfactory catalytic stability was observed, and the element distribution of spent catalysts almost returned to their initial state, with no detectable Pt sintering. This work provides new insights into designing active, stable, and regenerable novel PDH catalysts.

Electronic communications between active sites on individual metallic nanoparticles in catalysis

Catalytic activity of metal particles is reported to originate from the appearance of nonmetallic states, but conductive metallic particles, as an electron reservoir, should render electron delivery between reactants more favorably so as to have higher activity. We present that metallic rhodium particle catalysts are highly active in the low-temperature oxidation of carbon monoxide, whereas nonmetallic rhodium clusters or monoatoms on alumina remain catalytically inert. Experimental and theoretical results evidence the presence of electronic communications in between vertex atom active sites of individual metallic particles in the reaction. The electronic communications dramatically lower apparent activation energies via coupling two electrochemical-like half-reactions occurring on different active sites, which enable the metallic particles to show turnover frequencies at least four orders of magnitude higher than the nonmetallic clusters or monoatoms. Similar results are found for other metallic particle catalysts, implying the importance of electronic communications between active sites in heterogeneous catalysis.

DFT and machine learning guided investigation into the design of new dual-atom catalysts based on α-2 graphyne

The realm of atomic catalysts has witnessed notable advancements; yet, the predominant focus remains on single atomic catalysts (SACs). The exploration and successful implementation of dual atomic catalysts (DACs) pose intricate challenges, primarily concerning thermodynamic stability and optimal metallic composition. To address these issues, we present a comprehensive theoretical investigation of α-2 graphyne (GPY)-based DACs, synthesized in-house with a keen focus on formation stability. Density functional theory (DFT) simulations were leveraged to ascertain each DAC structure's stability, considering numerous transition metal permutations totalling about 823 DACs. Furthermore, we developed a machine learning (ML) model that predicts stability based solely on the physical characteristics of the constituent elements in the DACs, thus eliminating the need for extensive DFT calculations. Our findings not only offer detailed insights into atomic interactions but also highlight promising candidates for DACs, pushing beyond traditional trial-and-error synthesis approaches. This study fosters a deeper understanding of DACs and paves new pathways for exploring atomic catalysts for practical applications.

Periodic Single-Metal Site Catalysts: Creating Homogeneous and Ordered Atomic-Precision Structures

Heterogeneous single-metal-site catalysts (SMSCs), often referred to as single-atom catalysts (SACs), demonstrate promising catalytic activity, selectivity, and stability across a wide spectrum of reactions due to their rationally designed microenvironments encompassing coordination geometry, binding ligands, and electronic configurations. However, the inherent disorderliness of SMSCs at both atomic scale and nanoscale poses challenges in deciphering working principles and establishing the correlations between microenvironments and the catalytic performances of SMSCs. The rearrangement of randomly dispersed single metals into homogeneous and atomic-precisely structured periodic single-metal site catalysts (PSMSCs) not only simplifies the chaos in SMSCs systems but also unveils new opportunities for manipulating catalytic performance and gaining profound insights into reaction mechanisms. Moreover, the synergistic effects of adjacent single metals and the integration effects of periodic single-metal arrangement further broaden the industrial application scope of SMSCs. This perspective offers a comprehensive overview of recent advancements and outlines prospective avenues for research in the design and characterizations of PSMSCs, while also acknowledging the formidable challenges encountered and the promising prospects that lie ahead.

Integrative catalytic pairs for efficient multi-intermediate catalysis

Single-atom catalysts (SACs) have attracted considerable research interest owing to their combined merits of homogeneous and heterogeneous catalysts. However, the uniform and isolated active sites of SACs fall short in catalysing complex chemical processes that simultaneously involve multiple intermediates. In this Review, we highlight an emerging class of catalysts with adjacent binary active centres, which is called integrative catalytic pairs (ICPs), showing not only atomic-scale site-to-site electronic interactions but also synergistic catalytic effects. Compared with SACs or their derivative dual-atom catalysts (DACs), multi-interactive intermediates on ICPs can overcome kinetic barriers, adjust reaction pathways and break the universal linear scaling relations as the smallest active units. Starting from this active-site design principle, each single active atom can be considered as a brick to further build integrative catalytic clusters (ICCs) with desirable configurations, towards trimer or even larger multi-atom units depending on the requirement of a given reaction.

Tuning catalytic performance of platinum single atoms by choosing the shape of cerium dioxide supports

The local coordination environment of single atom catalysts (SACs) often determines their catalytic performance. To understand these metal-support interactions, we prepared Pt SACs on cerium dioxide (CeO2) cubes, octahedra and rods, with well-structured exposed crystal facets. The CeO2 crystals were characterized by SEM, TEM, pXRD, and N2 sorption, confirming the shape-selective synthesis, identical bulk structure, and variations in specific surface area, respectively. EPR, XPS, TEM and XANES measurements showed differences in the oxygen vacancy density following the trend rods > octahedra > cubes. AC-HAADF-STEM, XPS and CO-DRIFTS measurements confirmed the presence of only single Pt2+ sites, with different surface platinum surface concentrations. We then compared the performance of the three catalysts in ammonia borane hydrolysis. Precise monitoring of reaction kinetics between 30-80 °C gave Arrhenius plots with hundreds of data points. All plots showed a clear inflection point, the temperature of which (rods > octahedra > cubes) correlates to the energy barrier of ammonia borane diffusion to the Pt sites. These activity differences reflect variations in the - facet dependent - degree of stabilization of intermediates by surface oxygen lone pairs and surface-metal binding strength. Our results show how choosing the right macroscopic support shape can give control over single atom catalysed reactions on the microscopic scale.

A Multitechnique Study of C2H4 Adsorption on a Model Single-Atom Rh1 Catalyst

Single-atom catalysts are potentially ideal model systems to investigate structure-function relationships in catalysis if the active sites can be uniquely determined. In this work, we study the interaction of C2H4 with a model Rh/Fe3O4(001) catalyst that features 2-, 5-, and 6-fold coordinated Rh adatoms, as well as Rh clusters. Using multiple surface-sensitive techniques in combination with calculations of density functional theory (DFT), we follow the thermal evolution of the system and disentangle the behavior of the different species. C2H4 adsorption is strongest at the 2-fold coordinated Rh1 with a DFT-determined adsorption energy of -2.26 eV. However, desorption occurs at lower temperatures than expected because the Rh migrates into substitutional sites within the support, where the molecule is more weakly bound. The adsorption energy at the 5-fold coordinated Rh sites is predicated to be -1.49 eV, but the superposition of this signal with that from small Rh clusters and additional heterogeneity leads to a broad C2H4 desorption shoulder in TPD above room temperature.

4d-2p-4f Gradient Orbital Coupling Enables Tandem Catalysis for Simultaneous Abatement of N2O and CO on Atomically Dispersed Rh/CeO2 Catalyst

N2O and CO coexist in various industrial and mobile sources. The synergistic reaction of N2O and CO to generate N2 and CO2 has garnered significant research interest, but it remains extremely challenging. Herein, we constructed an atomically dispersed Rh-supported CeO2 catalyst with asymmetric Rh-O-Ce sites through gradient Rh 4d-O 2p-Ce 4f orbital coupling. This design effectively regulates the 4f electron states of Ce and promotes the electron filling of the O 3π* antibonding orbital to facilitate N-O bond cleavage. Near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) reveals that CO reacts with the surface-adsorbed O* generated by N2O decomposition through self-tandem catalysis, accelerating the rate-limiting step in N2O decomposition and activating the synergistic reaction of N2O and CO at temperatures as low as 115 °C. This work can guide the development of high-performance catalysts using the strategy of high-order orbital hybridization combined with the tandem concept to achieve versatile catalytic applications.

Synergistic Effects of MOFs and Noble Metals in Photocatalytic Reactions: Mechanisms and Applications

Photocatalytic technology can efficiently convert solar energy to chemical energy and this process is considered as one of the green and sustainable technology for practical implementation. In recent years, metal-organic frameworks (MOFs) have attracted widespread attention due to their unique advantages and have been widely applied in the field of photocatalysis. Among them, noble metals have contributed significant advances to the field as effective catalysts in photocatalytic reactions. Importantly, noble metals can also form a synergistic catalytic effect with MOFs to further improve the efficiency of photocatalytic reactions. However, how to precisely control the synergistic effect between MOFs and noble metals to improve the photocatalytic performance of materials still needs to be further studied. In this review, the synergistic effects of MOFs and noble metal catalysts in photocatalytic reactions are firstly summarized in terms of noble metal nanoparticles, noble metal monoatoms, noble metal compounds, and noble metal complexes, and focus on the mechanisms and advantages of these synergistic effects, so as to provide useful guidance for the further research and application of MOFs and contribute to the development of the field of photocatalysis.

Towards bridging thermo/electrocatalytic CO oxidation: from nanoparticles to single atoms

Proton exchange membrane fuel cells (PEMFCs), as a feasible alternative to replace the traditional fossil fuel-based energy converter, contribute significantly to the global sustainability agenda. At the PEMFC anode, given the high exchange current density, Pt/C is deemed the catalyst-of-choice to ensure that the hydrogen oxidation reaction (HOR) occurs at a sufficiently fast pace. The high performance of Pt/C, however, can only be achieved under the premise that high purity hydrogen is used. For instance, in the presence of trace level carbon monoxide, a typical contaminant during H2 production, Pt is severely deactivated by CO surface blockage. Addressing the poisoning issue necessitates for either developing anti-poisoning electrocatalysts or using pre-purified H2 obtained via a thermo-catalysis route. In other words, the CO poisoning issue can be addressed by either thermal-catalysis from the H2 supply side or electrocatalysis at the user side, respectively. In spite of the distinction between thermo-catalysis and electro-catalysis, there are high similarities between the two routes. Essentially, a reduction in the kinetic barrier for the combination of CO to oxygen containing intermediates is required in both techniques. Therefore, bridging electrocatalysis and thermocatalysis might offer new insight into the development of cutting edge catalysts to solve the poisoning issue, which, however, stands as an underexplored frontier in catalysis science. This review provides a critical appraisal of the recent advancements in preferential CO oxidation (CO-PROX) thermocatalysts and anti-poisoning HOR electrocatalysts, aiming to bridge the gap in cognition between the two routes. First, we discuss the differences in thermal/electrocatalysis, CO oxidation mechanisms, and anti-CO poisoning strategies. Second, we comprehensively summarize the progress of supported and unsupported CO-tolerant catalysts based on the timeline of development (nanoparticles to clusters to single atoms), focusing on metal-support interactions and interface reactivity. Third, we elucidate the stability issue and theoretical understanding of CO-tolerant electrocatalysts, which are critical factors for the rational design of high-performance catalysts. Finally, we underscore the imminent challenges in bridging thermal/electrocatalytic CO oxidation, with theory, materials, and the mechanism as the three main weapons to gain a more in-depth understanding. We anticipate that this review will contribute to the cognition of both thermocatalysis and electrocatalysis.

Unveiling the Mechanism of Plasma-Catalytic Low-Temperature Water-Gas Shift Reaction over Cu/γ-Al2O3 Catalysts

The water-gas shift (WGS) reaction is a crucial process for hydrogen production. Unfortunately, achieving high reaction rates and yields for the WGS reaction at low temperatures remains a challenge due to kinetic limitations. Here, nonthermal plasma coupled to Cu/γ-Al2O3 catalysts was employed to enable the WGS reaction at considerably lower temperatures (up to 140 °C). For comparison, thermal-catalytic WGS reactions using the same catalysts were conducted at 140-300 °C. The best performance (72.1% CO conversion and 67.4% H2 yield) was achieved using an 8 wt % Cu/γ-Al2O3 catalyst in plasma catalysis at ∼140 °C, with 8.74 MJ mol-1 energy consumption and 8.5% H2 fuel production efficiency. Notably, conventional thermal catalysis proved to be ineffective at such low temperatures. Density functional theory calculations, coupled with in situ diffuse reflectance infrared Fourier transform spectroscopy, revealed that the plasma-generated OH radicals significantly enhanced the WGS reaction by influencing both the redox and carboxyl reaction pathways.

Unraveling the Unique Strong Metal-Support Interaction in Titanium Dioxide Supported Platinum Clusters for the Hydrogen Evolution Reaction

Strong metal-support interaction (SMSI) is crucial to modulating the nature of metal species, yet the SMSI behaviors of sub-nanometer metal clusters remain unknown due to the difficulties in constructing SMSI at cluster scale. Herein, we achieve the successful construction of the SMSI between Pt clusters and amorphous TiO2 nanosheets by vacuum annealing, which requires a relatively low temperature that avoids the aggregation of small clusters. In situ scanning transmission electron microscopy observation is employed to explore the SMSI behaviors, and the results reveal the dynamic rearrangement of Pt atoms upon annealing for the first time. The originally disordered Pt atoms become ordered as the crystallizing of the amorphous TiO2 support, forming an epitaxial interface between Pt and TiO2. Such a SMSI state can remain stable in oxidation environment even at 400 °C. Further investigations prove that the electron transfer from TiO2 to Pt occupies the Pt 5d orbitals, which is responsible for the disappeared CO adsorption ability of Pt/TiO2 after forming SMSI. This work not only opens a new avenue for constructing SMSI at cluster scale but also provides in-depth understanding on the unique SMSI behavior, which would stimulate the development of supported metal clusters for catalysis applications.

Efficient catalytic oxidation of formaldehyde by defective g-C3N4-anchored single-atom Pt: A DFT study

Indoor volatile formaldehyde is a serious health hazard. The development of low-temperature and efficient nonhomogeneous oxidation catalysts is crucial for protecting human health and the environment but is also quite challenging. Single-atom catalysts (SACs) with active centers and coordination environments that are precisely tunable at the atomic level exhibit excellent catalytic activity in many catalytic fields. Among two-dimensional materials, the nonmagnetic monolayer material g-C3N4 may be a good platform for loading single atoms. In this study, the effect of nitrogen defect formation on the charge distribution of g-C3N4 is discussed in detail using density functional theory (DFT) calculations. The effect of nitrogen defects on the activated molecular oxygen of Pt/C3N4 was systematically revealed by DFT calculations in combination with molecular orbital theory. Two typical reaction mechanisms for the catalytic oxidation of formaldehyde were proposed based on the Eley-Rideal (E-R) mechanism. Pt/C3N4-V3N was more advantageous for path 1, as determined by the activation energy barrier of the rate-determining step and product desorption. Finally, the active centers and chemical structures of Pt/C3N4 and Pt/C3N4-V3N were verified to have good stability at 375 K by determination of the migration energy barriers and ab initio molecular dynamics simulations. Therefore, the formation of N defects can effectively anchor single-atom Pt and provide additional active sites, which in turn activate molecular oxygen to efficiently catalyze the oxidation of formaldehyde. This study provides a better understanding of the mechanism of formaldehyde oxidation by single-atom Pt catalysts and a new idea for the development of Pt as well as other metal-based single-atom oxidation catalysts.

The Surface/Interface Modulation of Platinum Group Metal (PGM)-Free Catalysts for VOCs and CO Catalytic Oxidation

Effective management of volatile organic compounds (VOCs) and carbon monoxide (CO) is critical to human health and the ecological environment. Catalytic oxidation is one of the most promising technologies for achieving efficient VOCs and CO emission control. Platinum group metal (PGM)-free catalysts are recently receiving sustainable attention in catalyzing VOCs and CO removal due to their low cost, superior catalytic activity, and excellent stability, but PGM-free catalysts face challenges in low-temperature catalytic efficiency. In this mini-review, starting with discussing the catalytic mechanism of VOCs and CO oxidation, we summarize the surface/interface modulation strategies of PGM-free catalysts to promote oxygen and VOCs/CO molecule activation for enhanced low-temperature oxidation activity, including oxygen vacancy engineering, heteroatom doping, surface acidity modification, and active interface construction. We highlight the currently remaining challenges and prospects of advanced PGM-free catalyst development for highly efficient VOCs and CO emission control in practical applications.

Ruthenium Nanoclusters and Single Atoms on α-MoC/N-Doped Carbon Achieves Low-Input/Input-Free Hydrogen Evolution via Decoupled/Coupled Hydrazine Oxidation

The hydrazine oxidation-assisted H2 evolution method promises low-input and input-free hydrogen production. However, developing high-performance catalysts for hydrazine oxidation (HzOR) and hydrogen evolution (HER) is challenging. Here, we introduce a bifunctional electrocatalyst α-MoC/N-C/RuNSA, merging ruthenium (Ru) nanoclusters (NCs) and single atoms (SA) into cubic α-MoC nanoparticles-decorated N-doped carbon (α-MoC/N-C) nanowires, through electrodeposition. The composite showcases exceptional activity for both HzOR and HER, requiring -80 mV and -9 mV respectively to reach 10 mA cm-2. Theoretical and experimental insights confirm the importance of two Ru species for bifunctionality: NCs enhance the conductivity, and its coexistence with SA balances the H ad/desorption for HER and facilitates the initial dehydrogenation during the HzOR. In the overall hydrazine splitting (OHzS) system, α-MoC/N-C/RuNSA excels as both anode and cathode materials, achieving 10 mA cm-2 at just 64 mV. The zinc hydrazine (Zn-Hz) battery assembled with α-MoC/N-C/RuNSA cathode and Zn foil anode can exhibit 97.3 % energy efficiency, as well as temporary separation of hydrogen gas during the discharge process. Therefore, integrating Zn-Hz with OHzS system enables self-powered H2 evolution, even in hydrazine sewage. Overall, the amalgamation of NCs with SA achieves diverse catalytic activities for yielding multifold hydrogen gas through advanced cell-integrated-electrolyzer system.

Facilely Fabricated Single-Site Ptδ+-O(OH)x- Species Associated with Alkali on Zirconia Exhibiting Superior Catalytic Oxidation Reactivity

Fabrication of robust isolated atom catalysts has been a research hotspot in the environment catalysis field for the removal of various contaminants, but there are still challenges in improving the reactivity and stability. Herein, through facile doping alkali metals in Pt catalyst on zirconia (Pt-Na/ZrO2), the atomically dispersed Ptδ+-O(OH)x- associated with alkali metal via oxygen bridge was successfully fabricated. This novel catalyst presented remarkably higher CO and hydrocarbon (HCs: C3H8, C7H8, C3H6, and CH4) oxidation activity than its counterpart (Pt/ZrO2). Systematically direct and solid evidence from experiments and density functional theory calculations demonstrated that the fabricated electron-rich Ptδ+-O(OH)x- related to Na species rather than the original Ptδ+-O(OH)x-, serving as the catalytically active species, can readily react with CO adsorbed on Ptδ+ to produce CO2 with significantly decreasing energy barrier in the rate-determining step from 1.97 to 0.93 eV. Additionally, owing to the strongly adsorbed and activated water by Na species, those fabricated single-site Ptδ+-O(OH)x- linked by Na species could be easily regenerated during the oxidation reaction, thus considerably boosting its oxidation reactivity and durability. Such facile construction of the alkali ion-linked active hydroxyl group was also realized by Li and K modification which could guide to the design of efficient catalysts for the removal of CO and HCs from industrial exhaust.

Enhancing the Carbon Monoxide Oxidation Performance through Surface Defect Enrichment of Ceria-Based Supports for Platinum Catalyst

Effective synthesis and application of single-atom catalysts on supports lacking enough defects remain a significant challenge in environmental catalysis. Herein, we present a universal defect-enrichment strategy to increase the surface defects of CeO2-based supports through H2 reduction pretreatment. The Pt catalysts supported by defective CeO2-based supports, including CeO2, CeZrOx, and CeO2/Al2O3 (CA), exhibit much higher Pt dispersion and CO oxidation activity upon reduction activation compared to their counterpart catalysts without defect enrichment. Specifically, Pt is present as embedded single atoms on the CA support with enriched surface defects (CA-HD) based on which the highly active catalyst showing embedded Pt clusters (PtC) with the bottom layer of Pt atoms substituting the Ce cations in the CeO2 surface lattice can be obtained through reduction activation. Embedded PtC can better facilitate CO adsorption and promote O2 activation at PtC-CeO2 interfaces, thereby contributing to the superior low-temperature CO oxidation activity of the Pt/CA-HD catalyst after activation.

Oscillatory Active State of a Pd Nanocatalyst Identified by In Situ Capture of the Instantaneous Structure-Activity Change at the Atomic Scale

Identifying the active phase with the highest activity, which is long-believed to be a steady state of the catalyst, is the basis of rational design of heterogeneous catalysis. In this work, we performed detailed in situ investigations, successfully capturing the instantaneous structure-activity change in oscillating Pd nanocatalysts during methane oxidation, which reveals an unprecedented oscillatory active state. Combining in situ quantitative environmental transmission electron microscopy and highly sensitive online mass spectrometry, we identified two distinct phases for the reaction: one where the Pd nanoparticles refill with oxygen, and the other, a period of abrupt pumping of oxygen and boosted methane oxidation within about 1 s. It is the rapid reduction process that shows the highest activity for total oxidation of methane, not a PdO or Pd steady state under the conditions applied here (methane:oxygen = 5:1). This observation challenges the traditional understanding of the active phase and requires a completely different strategy for catalyst optimization.

Enhanced Catalytic Oxidation Reactivity over Atomically Dispersed Pt/CeO2 Catalysts by CO Activation

The elevation of the low-temperature oxidation activity for Pt/CeO2 catalysts is challenging to meet the increasingly stringent requirements for effectively eliminating carbon monoxide (CO) from automobile exhaust. Although reducing activation is a facile strategy for boosting reactivity, past research has mainly concentrated on applying H2 as the reductant, ignoring the reduction capabilities of CO itself, a prevalent component of automobile exhaust. Herein, atomically dispersed Pt/CeO2 was fabricated and activated by CO, which could lower the 90% conversion temperature (T90) by 256 °C and achieve a 20-fold higher CO consumption rate at 200 °C. The activated Pt/CeO2 catalysts showed exceptional catalytic oxidation activity and robust hydrothermal stability under the simulated working conditions for gasoline or diesel exhausts. Characterization results illustrated that the CO activation triggered the formation of a large portion of Pt0 terrace sites, acting as inherent active sites for CO oxidation. Besides, CO activation weakened the Pt-O-Ce bond strength to generate a surface oxygen vacancy (Vo). It served as the oxygen reservoir to store the dissociated oxygen and convert it into active dioxygen intermediates. Conversely, H2 activation failed to stimulate Vo, but triggered a deactivating transformation of the Pt nanocluster into inactive PtxOy in the presence of oxygen. The present work offers coherent insight into the upsurging effect of CO activation on Pt/CeO2, aiming to set up a valuable avenue in elevating the efficiency of eliminating CO, C3H6, and NH3 from automobile exhaust.

Seeding Atomic Silver into Internal Lattice Sites of Transition Metal Oxide for Advanced Electrocatalysis

Transition metal oxides (TMOs) are widely studied for loading of various catalysts due to their low cost and high structure flexibility. However, the prevailing close-packed nature of most TMOs crystals has restricted the available loading sites to surface only, while their internal bulk lattice remains unactuated due to the inaccessible narrow space that blocks out most key reactants and/or particulate catalysts. Herein, using tunnel-structured MnO2, this study demonstrates how TMO's internal lattice space can be activated as extra loading sites for atomic Ag in addition to the conventional surface-only loading, via which a dual-form Ag catalyst within MnO2 skeleton is established. In this design, not only faceted Ag nanoparticles are confined onto MnO2 surface by coherent lattice-sharing, Ag atomic strings are also seeded deep into the sub-nanoscale MnO2 tunnel lattice, enriching the catalytically active sites. Tested for electrochemical CO2 reduction reaction (eCO2RR), such dual-form catalyst exhibits a high Faradaic efficiency (94%), yield (67.3 mol g-1 h-1) and durability (≈48 h) for CO production, exceeding commercial Ag nanoparticles and most Ag-based electrocatalysts. Theoretical calculations further reveal the concurrent effect of such dual-form catalyst featuring facet-dependent eCO2RR for Ag nanoparticles and lattice-confined eCO2RR for Ag atomic strings, inspiring the future design of catalyst-substrate configuration.

The Acid Roles of PtSn@Al2O3 in the Synthesis and Performance of Propane Dehydrogenation

In this study, a PtSn/Al2O3 catalyst with bimetallic uniform distribution in the sphere was synthesized. The PDH performance and characterization analyses, such as with FTIR, XPS, and NH3-TPD, were investigated. The effects of acid on the PDH performance were analyzed. Citric acid (CA) acted as a competing adsorbent in the preparation process of the PtSn/Al2O3 catalyst to synthesize the uniform catalyst. Water washing and alkali-treated samples were also studied. SEM line scanning revealed that increased the apparent concentration of Pt metal from 0.23 to 0.30 with citric acid. In contrast to the fresh PtSn/Al2O3 catalyst, the addition of citric acid increased the PDH selectivity from 74% to 93%. After alkali or water washing treatments, the catalyst's selectivity further increased to 96%. Strong acid sites promoted the breaking of C-C bonds during the PDH reaction, resulting in more methane and ethylene byproducts, and decreased catalyst selectivity for fresh PtSn/Al2O3. From the PDH reaction thermodynamic analysis, a relatively sub-atmospheric pressure environment with a lower propane pressure could be the reasonable choice.

In situ visualizing reveals potential drive of lattice expansion on defective support toward efficient removal of nitrogen oxides

As a sustainable and promising approach of removing of nitrogen oxides (NOx), catalytic reduction of NOx with H2 is highly desirable with a precise understanding to the structure-activity relationship of supported catalysts. In particular, the dynamic evolution of support at microscopic scale may play a critical role in heterogeneous catalysis, however, identifying the in situ structural change of support under working condition with atomic precision and revealing its role in catalysis is still a grand challenge. Herein, we visually capture the surface lattice expansion of WO3-x support in Pt-WO3-x catalyst induced by NO in the exemplified reduction of NO with H2 using in situ transmission electron microscopy and first reveal its important role in enhancing catalysis. We find that NO can adsorb on the oxygen vacancy sites of WO3-x and favorably induce the reversible stretching of W-O-W bonds during the reaction, which can reduce the adsorption energy of NO on Pt4 centers and the energy barrier of the rate-determining step. The comprehensive studies reveal that lattice expansion of WO3-x support can tune the catalytic performance of Pt-WO3-x catalyst, leading to 20% catalytic activity enhancement for the exemplified reduction of NO with H2. This work reveals that the lattice expansion of defective support can tune and optimize the catalytic performance at the atomic scale.

Fully exposed Pt clusters for efficient catalysis of multi-step hydrogenation reactions

For di-nitroaromatics hydrogenation, it is a challenge to achieve the multi-step hydrogenation with high activity and selectivity due to the complexity of the process involving two nitro groups. Consequently, many precious metal catalysts suffer from low activity for this multi-step hydrogenation reaction. Herein, we employ a fully exposed Pt clusters catalyst consisting of an average of four Pt atoms on nanodiamond@graphene (Ptn/ND@G), demonstrating excellent catalytic performance for the multi-step hydrogenation of 2,4-dinitrotoluene. The TOF (40647 h-1) of Ptn/ND@G is significantly superior to that of single Pt atoms catalyst, Pt nanoparticles catalyst, and even all the known catalysts. Density functional theory calculations and absorption experiments reveal that the synergetic interaction between the multiple active sites of Ptn/ND@G facilitate the co-adsorption/activation of reactants and H2, as well as the desorption of intermediates/products, which is the key for the higher catalytic activity than single Pt atoms catalyst and Pt nanoparticles catalyst.

Close Intimacy between PtIn Clusters and Zeolite Channels for Ultrastability toward Propane Dehydrogenation

Propane dehydrogenation (PDH) serves as a pivotal intentional technique to produce propylene. The stability of PDH catalysts is generally restricted by the readsorption of propylene which can subsequently undergo side reactions for coke formation. Herein, we demonstrate an ultrastable PDH catalyst by encapsulating PtIn clusters within silicalite-1 which serves as an efficient promoter for olefin desorption. The mean lifetime of PtIn@S-1 (S-1, silicalite-1) was calculated as 37317 h with high propylene selectivity of >97% at 580 °C with a weight hourly space velocity (WHSV) of 4.7 h-1. With an ultrahigh WHSV of 1128 h-1, which pushed the catalyst away from the equilibrium conversion to 13.3%, PtIn@S-1 substantially outperformed other reported PDH catalysts in terms of mean lifetime (32058 h), reaction rates (3.42 molpropylene gcat-1 h-1 and 341.90 molpropylene gPt-1 h-1), and total turnover number (14387.30 kgpropylene gcat-1). The developed catalyst is likely to lead the way to scalable PDH applications.

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Stable and Highly Active Single Atom Configurations for Photocatalytic H2 Generation

The employment of single atoms (SAs), especially Pt SAs, as co-catalysts in photocatalytic H2 generation has gained significant attention due to their exceptional efficiency. However, a major challenge in their application is the light-induced agglomeration of these SAs into less active nanosized particles under photocatalytic conditions. This study addresses the stability and reactivity of Pt SAs on TiO2 surfaces by investigating various post-deposition annealing treatments in air, Ar, and Ar-H2 environments at different temperatures. It is described that annealing in an Ar-H2 atmosphere optimally stabilizes SA configurations, forming stable 2D rafts of assembled SAs ≈0.5-1 nm in diameter. These rafts not only resist light-induced agglomeration but also exhibit significantly enhanced H2 production efficiency. The findings reveal a promising approach to maintaining the high reactivity of Pt SAs while overcoming the critical challenge of their stability under photocatalytic conditions.