Recent Advances in Environmentally Friendly Dual-crosslinking Polymer Networks

Environmentally friendly crosslinked polymer networks feature degradable covalent or non-covalent bonds, with many of them manifesting dynamic characteristics. These attributes enable convenient degradation, facile reprocessibility, and self-healing capabilities. However, the inherent instability of these crosslinking bonds often compromises the mechanical properties of polymer networks, limiting their practical applications. In this context, environmentally friendly dual-crosslinking polymer networks (denoted EF-DCPNs) have emerged as promising alternatives to address this challenge. These materials effectively balance the need for high mechanical properties with the ability to degrade, recycle, and/or self-heal. Despite their promising potential, investigations into EF-DCPNs remain in their nascent stages, and several gaps and limitations persist. This Review provides a comprehensive overview of the synthesis, properties, and applications of recent progress in EF-DCPNs. Firstly, synthetic routes to a rich variety of EF-DCPNs possessing two distinct types of dynamic bonds (i.e., imine, disulfide, ester, hydrogen bond, coordination bond, and other bonds) are introduced. Subsequently, complex structure- and dynamic nature-dependent mechanical, thermal, and electrical properties of EF-DCPNs are discussed, followed by their exemplary applications in electronics and biotechnology. Finally, future research directions in this rapidly evolving field are outlined.

Phenylacetylene-Terminated Poly(Ethylene Glycol) as Ligands for Colloidal Noble Metal Nanoparticles: a New Tool for "Grafting to" Approach

We report a new design of polymer phenylacetylene (PA) ligands and the ligand exchange methodology for colloidal noble metal nanoparticles (NPs). PA-terminated poly(ethylene glycol) (PEG) can bind to metal NPs through acetylide (M-C≡C-R) that affords a high grafting density. The ligand-metal interaction can be switched between σ bonding and extended π backbonding by changing grafting conditions. The σ bonding of PEG-PA with NPs is strong and it can compete with other capping ligands including thiols, while the π backbonding is much weaker. The σ bonding is also demonstrated to improve the catalytic performance of Pd for ethanol oxidation and prevent surface absorption of the reaction intermediates. Those unique binding characteristics will enrich the toolbox in the control of colloidal surface chemistry and their applications using polymer ligands.

Bottlebrush Block Copolymers at the Interface of Immiscible Liquids: Adsorption and Lateral Packing

Amphiphilic bottlebrush block copolymers (BBCPs), having a hydrophilic bottlebrush polymer (BP) linked covalently to a hydrophobic BP, were found to segregate to liquid-liquid interfaces to minimize the free energy of the system. The key parameter influencing the outcome of the experiments is the ratio between the degree of polymerization of the backbone (NBB) and that of the side-chain brushes (NSC). Specifically, a spherical, star-like configuration results when NBB < NSC, while a cylindrical, bottlebrush-like shape is preferred when NBB > NSC. Dynamic interfacial tension (γ) and fluorescence recovery after photobleaching (FRAP) measurements show that the BBCP configuration influences the areal density and in-plane diffusion at the fluid interface. The characteristic relaxation times associated with BBCP adsorption (τA) and reorganization (τR) were determined by fitting time-dependent interfacial tension measurements to a sum of two exponential relaxation functions. Both τA and τR initially increased with NBB up to 92 repeat units, due to the larger hydrodynamic radius in solution and slower in-plane diffusivity, attributed to a shorter cross-sectional diameter of the side-chains near the block junction. This trend reversed at NBB = 190, with shorter τA and τR attributed to increased segregation strength and exposure of the bare water/toluene interface due to tilting and/or wiggling of the backbone chains, respectively. The adsorption energy barrier decreased with higher NBB, due to a reduced BBCP packing density at the fluid interface. This study provides fundamental insights into macromolecular assembly at fluid interfaces, as it pertains to unique bottlebrush block architectures.

Ultrasmall Inorganic Mesoporous Nanoparticles: Preparation, Functionalization, and Application

Ultrasmall mesoporous nanoparticles (<50 nm), a unique porous nanomaterial, have been widely studied in many fields in the last decade owing to the abundant advantages, involving rich mesopores, low density, high surface area, numerous reaction sites, large cavity space, ultrasmall size, etc. This paper presents a review of recent advances in the preparation, functionalization, and applications of ultrasmall inorganic mesoporous nanoparticles for the first time. The soft monomicelles-directed method, in contrast to the hard-template and template-free methods, is more flexible in the synthesis of mesoporous nanoparticles. This is because the amphiphilic micelle has tunable functional blocks, controlled molecule masses, configurations and mesostructures. Focus on the soft micelle directing method, monomicelles could be classified into four types, i.e., the Pluronic-type block copolymer monomicelles, laboratory-synthesized amphiphilic block copolymers monomicelles, the single-molecule star-shaped block copolymer monomicelles, and the small-molecule anionic/cationic surfactant monomicelles. This paper also reviews the functionalization of the inner mesopores and the outer surfaces, which includes constructing the yolkshell structures (encapsulated nanoparticles), anchoring the active components packed on the shell and building an asymmetric Janus architecture. Then, several representative applications, involving catalysis, energy storage, and biomedicines are presented. Finally, the prospects and challenges of controlled synthesis and large-scale applications of ultrasmall mesoporous nanoparticles in the future are foreseen.

Confined Unimolecular Micelles for Directed Self-Assembly of Ultrastable Multiple-Responsive Ratiometric Fluorescent Ultrasmall Nanoparticle Assemblies

Ultrasmall fluorescent nanomaterials have been widely studied as novel fluorescent probes; however, these nanomaterials are prone to structural damage or aggregation, and the sensitivity and accuracy of most single emission fluorescence probes were very low. Therefore, the controlled synthesis of stable dual-emission ratiometric fluorescence ultrasmall assembly probes still remains a challenge. Herein, star-like polymer unimolecular micelles were utilized as a scaffold template to encapsulate fluorescent ultrasmall carbon quantum dots (CQDs) and gold nanoclusters (AuNCs) via the polymer template directed self-assembly strategy to obtain multiple-responsive ratiometric fluorescent assemblies. The assemblies were ultrastable, well-defined, and nearly monodispersed with controlled size, regular morphology, and pH- and thermal-responsiveness. The assemblies can be applied to realize rapid, sensitive, quantitative, and specific detection of Cu2+ and GSH. Moreover, the convenient rapid real-time detection was realized via the combination of the visualized paper-based sensor, and the multilevel information encryption was also achieved.

Anisotropy in magnetic materials for sensors and actuators in soft robotic systems

The field of soft intelligent robots has rapidly developed, revealing extensive potential of these robots for real-world applications. By mimicking the dexterities of organisms, robots can handle delicate objects, access remote areas, and provide valuable feedback on their interactions with different environments. For autonomous manipulation of soft robots, which exhibit nonlinear behaviors and infinite degrees of freedom in transformation, innovative control systems integrating flexible and highly compliant sensors should be developed. Accordingly, sensor-actuator feedback systems are a key strategy for precisely controlling robotic motions. The introduction of material magnetism into soft robotics offers significant advantages in the remote manipulation of robotic operations, including touch or touchless detection of dynamically changing shapes and positions resulting from the actuations of robots. Notably, the anisotropies in the magnetic nanomaterials facilitate the perception and response with highly selective, directional, and efficient ways used for both sensors and actuators. Accordingly, this review provides a comprehensive understanding of the origins of magnetic anisotropy from both intrinsic and extrinsic factors and summarizes diverse magnetic materials with enhanced anisotropy. Recent developments in the design of flexible sensors and soft actuators based on the principle of magnetic anisotropy are outlined, specifically focusing on their applicabilities in soft robotic systems. Finally, this review addresses current challenges in the integration of sensors and actuators into soft robots and offers promising solutions that will enable the advancement of intelligent soft robots capable of efficiently executing complex tasks relevant to our daily lives.

Thermal Conductivity of Bottle-Brush Polymers

Using molecular dynamics (MD) simulations of a generic model, we investigated heat propagation in bottle-brush polymers (BBP). An architecture is referred to as a BBP when a linear (backbone) polymer is grafted with the side chains of different length Ns and grafting density ρg, which control the bending stiffness of a backbone. Investigating κ-behavior in BBP is of particular interest due to two competing mechanics: increased backbone stiffness, via Ns and ρg, increases the thermal transport coefficient κ, while the presence of side chains provides additional pathways for heat leakage. We show how a delicate competition between these two effects controls κ. These results reveal that going from a weakly grafting (ρg < 1) to a highly grafting (ρg ≥ 1) regime, κ changes non-monotonically that is independent of Ns. The effect of side chain mass on κ and heat flow in the BBP melts is also discussed.

Polymer Brushes and Surface Nanostructures: Molecular Design, Precise Synthesis, and Self-Assembly

For over two decades, polymer brushes have found wide applications in industry and scientific research. Now, polymer brush research has been a significant research focus in the community of polymer science. In this review paper, we give an introduction to the synthesis, self-assembly, and applications of one-dimensional (1D) polymer brushes on polymer backbones, two-dimensional (2D) polymer brushes on flat surfaces, and three-dimensional (3D) polymer brushes on spherical particles. Examples of the synthesis of polymer brushes on different substrates are provided. Studies on the formation of the surface nanostructures on solid surfaces are also reviewed in this article. Multicomponent polymer brushes on solid surfaces are able to self-assemble into surface micelles (s-micelles). If the s-micelles are linked to the substrates through cleavable linkages, the s-micelles can be cleaved from the substrates, and the cleaved s-micelles are able to self-assemble into hierarchical structures. The formation of the surface nanostructures by coassembly of polymer brushes and "free" polymer chains (coassembly approach) or polymerization-induced surface self-assembly approach, is discussed. The applications of the polymer brushes in colloid and biomedical science are summarized. Finally, perspectives on the development of polymer brushes are offered in this article.

Hierarchically Structured Nanocomposites via Mixed-Graft Block Copolymer Templating: Achieving Controlled Nanostructure and Functionality

Integrating inorganic and polymerized organic functionalities to create composite materials presents an efficient strategy for the discovery and fabrication of multifunctional materials. The characteristics of these composites go beyond a simple sum of individual component properties; they are profoundly influenced by the spatial arrangement of these components and the resulting homo-/hetero-interactions. In this work, we develop a facile and highly adaptable approach for crafting nanostructured polymer-inorganic composites, leveraging hierarchically assembling mixed-graft block copolymers (mGBCPs) as templates. These mGBCPs, composed of diverse polymeric side chains that are covalently tethered with a defined sequence to a linear backbone polymer, self-assemble into ordered hierarchical structures with independently tuned nano- and mesoscale lattice features. Through the coassembly of mGBCPs with diversely sized inorganic fillers such as metal ions (ca. 0.1 nm), metal oxide clusters (0.5-2 nm), and metallic nanoparticles (>2 nm), we create three-dimensional filler arrays with controlled interfiller separation and arrangement. Multiple types of inorganic fillers are simultaneously integrated into the mGBCP matrix by introducing orthogonal interactions between distinct fillers and mGBCP side chains. This results in nanocomposites where each type of filler is selectively segregated into specific nanodomains with matrix-defined orientations. The developed coassembly strategy offers a versatile and scalable pathway for hierarchically structured nanocomposites, unlocking new possibilities for advanced materials in the fields of optoelectronics, sensing, and catalysis.

Selectively Confined Black Phosphorus Nanowires in Carbon Nanotubes

Nanoconfinement of low-dimensional materials opens up a new territory for tailoring material hybridization to produce novel geometric structures for applications in electronics, catalysis, and photonics. Despite the progress made in the encapsulation of 2D materials, exploration of their definite crystal structures into lower-dimensional nanomaterials is still largely unexplored. Herein, one-dimensional black phosphorus (BP) nanowires with an aspect ratio of over 100 produced by confining BP into the CNT (conf-BP@CNT) are reported. Notably, the unique structure and dimensions of BP were determined by confinement within the CNT and were accurately characterized by crystallography. During the spatially confined growth, the defects and capillarity effect of the CNT promote nucleation and growth of BP within the CNT. conf-BP@CNT shows surface charge localization of conf-BP and protection rendered by the CNT shell, giving rise to more efficient and stable photocatalytic rhodamine B (RhB) degradation than the bare exfoliated BP nanosheets. These results demonstrate the effectiveness of nanoconfinement in producing nanomaterials with controllable dimensions, precise spatial arrangement, and unique structures.

Colloidal Polymer-Templated Formation of Inorganic Nanocrystals and their Emerging Applications

Inorganic nanocrystals possess unique physicochemical properties compared to their bulk counterparts. Stabilizing agents are commonly used for the preparation of inorganic nanocrystals with controllable properties. Particularly, colloidal polymers have emerged as general and robust templates for in situ formation and confinement of inorganic nanocrystals. In addition to templating and stabilizing inorganic nanocrystals, colloidal polymers can tailor their physicochemical properties such as size, shape, structure, composition, surface chemistry, and so on. By incorporating functional groups into colloidal polymers, desired functions can be integrated with inorganic nanocrystals, advancing their potential applications. Here, recent advances in the colloidal polymer-templated formation of inorganic nanocrystals are reviewed. Seven types of colloidal polymers, including dendrimer, polymer micelle, stare-like block polymer, bottlebrush polymer, spherical polyelectrolyte brush, microgel, and single-chain nanoparticle, have been extensively applied for the synthesis of inorganic nanocrystals. Different strategies for the development of these colloidal polymer-templated inorganic nanocrystals are summarized. Then, their emerging applications in the fields of catalysis, biomedicine, solar cells, sensing, light-emitting diodes, and lithium-ion batteries are highlighted. Last, the remaining issues and future directions are discussed. This review will stimulate the development and application of colloidal polymer-templated inorganic nanocrystals.

Responsive Regulation of Energy Transfer in Lanthanide-Doped Nanomaterials Dispersed in Chiral Nematic Structure

The responsive control of energy transfer (ET) plays a key role in the broad applications of lanthanide-doped nanomaterials. Photonic crystals (PCs) are excellent materials for ET regulation. Among the numerous materials that can be used to fabricate PCs, chiral nematic liquid crystals are highly attractive due to their good photoelectric responsiveness and biocompatibility. Here, the mechanisms of ET and the photonic effect of chiral nematic structures on ET are introduced; the regulation methods of chiral nematic structures and the resulting changes in ET of lanthanide-doped nanomaterials are highlighted; and the challenges and promising opportunities for ET in chiral nematic structures are discussed.

Nanostructures, Linear Rheological Responses, and Tunable Mechanical Properties of Microphase-Separated Cellulose-graft-Diblock Bottlebrush Copolymer Elastomers

A series of cellulose-graft-diblock bottlebrush copolymer elastomers (cellulose-graft-poly(n-butyl acrylate)-block-poly(methyl methacrylate) (Cell-g-PBA-b-PMMA)) with short side chains were synthesized via successive atom transfer radical polymerization (ATRP) to study the influence of varying compositions and lengths of the graft diblock side chains on microphase morphologies and properties. The microphase-separated morphologies from misaligned spheres to cylinders were observed by atomic force microscopy (AFM) and small-angle X-ray scattering (SAXS) measurements. These bottlebrush copolymer elastomers possessed thermal stability and enhanced mechanical properties because the PMMA outer block could self-assemble into hard microdomains, which served as physical cross-links. The viscoelastic responses of these bottlebrush copolymers within the linear viscoelastic (LVE) regime were carried out by the oscillatory shear rheology. The time-temperature superposition (tTs) principle was applied to construct the master curves of the dynamic moduli, and the sequential relaxation of dense bottlebrush copolymers with different PMMA hard outer block lengths was analyzed. The rheological behaviors in this work could be utilized to build up the connection of microstructures and properties for the application of these bottlebrush copolymers as high-performance thermoplastic elastomers.

Insights into Structural, Electronic, and Transport Properties of Pentagonal PdSe2 Nanotubes Using First-Principles Calculations

One-dimensional (1D) novel pentagonal materials have gained significant attention as a new class of materials with unique properties that could influence future technologies. In this report, we studied the structural, electronic, and transport properties of 1D pentagonal PdSe₂ nanotubes (p-PdSe₂ NTs). The stability and electronic properties of p-PdSe₂ NTs with different tube sizes and under uniaxial strain were investigated using density functional theory (DFT). The studied structures showed an indirect-to-direct bandgap transition with slight variation in the bandgap as the tube diameter increased. Specifically, (5 × 5) p-PdSe₂ NT, (6 × 6) p-PdSe₂ NT, (7 × 7) p-PdSe₂ NT, and (8 × 8) p-PdSe₂ NT are indirect bandgap semiconductors, while (9 × 9) p-PdSe₂ NT exhibits a direct bandgap. In addition, under low uniaxial strain, the surveyed structures were stable and maintained the pentagonal ring structure. The structures were fragmented under tensile strain of 24%, and compression of -18% for sample (5 × 5) and -20% for sample (9 × 9). The electronic band structure and bandgap were strongly affected by uniaxial strain. The evolution of the bandgap vs. the strain was linear. The bandgap of p-PdSe₂ NT experienced an indirect-direct-indirect or a direct-indirect-direct transition when axial strain was applied. A deformability effect in the current modulation was observed when the bias voltage ranged from about 1.4 to 2.0 V or from -1.2 to -2.0 V. Calculation of the field effect I-V characteristic showed that the on/off ratio was large with bias potentials from 1.5 to 2.0 V. This ratio increased when the inside of the nanotube contained a dielectric. The results of this investigation provide a better understanding of p-PdSe₂ NTs, and open up potential applications in next-generation electronic devices and electromechanical sensors.

Block Copolymer Enabled Synthesis and Assembly of Chiral Metal Oxide Nanoparticle

Chiral metal oxide nanostructures have received tremendous attention in nanotechnological applications owing to their intriguing chiroptical and magnetic properties. Current synthetic methods mostly rely on the use of amino acids or peptides as chiral inducers. Here, we report a general approach to fabricate chiral metal oxide nanostructures with tunable magneto-chiral effects, using block copolymer (BCP) inverse micelle and R/S-mandelic acid (MA). Diverse chiral metal oxide nanostructures are prepared by the selective incorporation of precursors within micellar cores followed by the oxidation process, exhibiting intense chiroptical properties with a g-factor up to 7.0 × 10^-3 in the visible-NIR range for the Cr₂O₃ nanoparticle multilayer. The BCP inverse micelle is found to inhibit the racemization of MA, allowing MA to act as a chiral dopant that imparts chirality to nanostructures via hierarchical chirality transfer. Notably, for paramagnetic nanostructures, magneto-chiroptical modulation is realized by regulating the direction of the external magnetic field. This BCP-driven approach can be extended to the mass production of chiral nanostructures with tunable architectures and optical activities, which may provide insights into the development of chiroptical functional materials.

Magnetic Iron Oxide Nanoparticles for Brain Imaging and Drug Delivery

Central nervous system (CNS) disorders affect as many as 1.5 billion people globally. The limited delivery of most imaging and therapeutic agents into the brain is a major challenge for treatment of CNS disorders. With the advent of nanotechnologies, controlled delivery of drugs with nanoparticles holds great promise in CNS disorders for overcoming the blood-brain barrier (BBB) and improving delivery efficacy. In recent years, magnetic iron oxide nanoparticles (MIONPs) have stood out as a promising theranostic nanoplatform for brain imaging and drug delivery as they possess unique physical properties and biodegradable characteristics. In this review, we summarize the recent advances in MIONP-based platforms as imaging and drug delivery agents for brain diseases. We firstly introduce the methods of synthesis and surface functionalization of MIONPs with emphasis on the inclusion of biocompatible polymers that allow for the addition of tailored physicochemical properties. We then discuss the recent advances in in vivo imaging and drug delivery applications using MIONPs. Finally, we present a perspective on the remaining challenges and possible future directions for MIONP-based brain delivery systems.

Review on supported metal catalysts with partial/porous overlayers for stabilization

Heterogeneous catalysts of supported metals are important for both liquid-phase and gas-phase chemical transformations which underpin the petrochemical sector and manufacture of bulk or fine chemicals and pharmaceuticals. Conventional supported metal catalysts (SMC) suffer from deactivation resulting from sintering, leaching, coking and so on. Besides the choice of active species (e.g. atoms, clusters, nanoparticles) to maximize catalytic performances, strategies to stabilize active species are imperative for rational design of catalysts, particularly for those catalysts that work under heated and corrosive reaction conditions. The complete encapsulation of metal active species within a matrix (e.g. zeolites, MOFs, carbon, etc.) or core-shell arrangements is popular. However, the use of partial/porous overlayers (PO) to preserve metals, which simultaneously ensures the accessibility of active sites through controlling the size/shape of diffusing reactants and products, has not been systematically reviewed. The present review identifies the key design principles for fabricating supported metal catalysts with partial/porous overlayers (SMCPO) and demonstrates their advantages versus conventional supported metals in catalytic reactions.

Continuous manufacturing of highly stable lead halide perovskite nanocrystals via a dual-reactor strategy

Lead halide perovskite nanocrystals possess incredible potential as next generation emitters due to their stellar set of optoelectronic properties. Unfortunately, their instability towards many ambient conditions and reliance on batch processing hinder their widespread utilities. Herein, we address both challenges by continuously synthesizing highly stable perovskite nanocrystals via integrating star-like block copolymer nanoreactors into a house-built flow reactor. Perovskite nanocrystals manufactured in this strategy display significantly enhanced colloidal, UV, and thermal stabilities over those synthesized with conventional ligands. Such scaling up of highly stable perovskite nanocrystals represents an important step towards their eventual use in many practical applications in optoelectronic materials and devices.

Magnetically Tunable One-Dimensional Plasmonic Photonic Crystals

Integrating plasmonic resonance into photonic bandgap nanostructures promises additional control over their optical properties. Here, one-dimensional (1D) plasmonic photonic crystals with angular-dependent structural colors are fabricated by assembling magnetoplasmonic colloidal nanoparticles under an external magnetic field. Unlike conventional 1D photonic crystals, the assembled 1D periodic structures show angular-dependent colors based on the selective activation of optical diffraction and plasmonic scattering. They can be further fixed in an elastic polymer matrix to produce a photonic film with angular-dependent and mechanically tunable optical properties. The magnetic assembly enables precise control over the orientation of the 1D assemblies within the polymer matrix, producing photonic films with designed patterns displaying versatile colors from the dominant backward optical diffraction and forward plasmonic scattering. The combination of optical diffraction and plasmonic properties within a single system holds the potential for developing programmable optical functionalities for applications in various optical devices, color displays, and information encryption systems.

Cellulose/inorganic nanoparticles-based nano-biocomposite for abatement of water and wastewater pollutants

Nanostructured materials offer a significant role in wastewater treatment with diminished capital and operational expense, low dose, and pollutant selectivity. Specifically, the nanocomposites of cellulose with inorganic nanoparticles (NPs) have drawn a prodigious interest because of the extraordinary cellulose properties, high specific surface area, and pollutant selectivity of NPs. Integrating inorganic NPs with cellulose biopolymers for wastewater treatment is a promising advantage for inorganic NPs, such as colloidal stability, agglomeration prevention, and easy isolation of magnetic material after use. This article presents a comprehensive overview of water treatment approaches following wastewater remediation by green and environmentally friendly cellulose/inorganic nanoparticles-based bio-nanocomposites. The functionalization of cellulose, functionalization mechanism, and engineered hybrid materials were thoroughly discussed. Moreover, we also highlighted the purification of wastewater through the composites of cellulose/inorganic nanoparticles via adsorption, photocatalytic and antibacterial approach.

Template-directed growth of Ag nanostructures: soft templates versus hard templates

Hard template-directed growth methods present a compelling route for the synthesis of Ag nanostructures with precise size control. Meanwhile, soft template methods are effective and flexible for the synthesis of Ag nanostructures with various morphologies. However, the role of the soft template is ambiguous and obviously neglected in hard template-directed growth processes due to the strong confinement effect of the hard template, limiting the diversity of Ag nanostructures that can be obtained. Herein, we design Au nanoframes with deformable head structures as a hard template while using cetyltrimethylammonium chloride as a soft template, to direct the growth of Ag atoms on Au nanobipyramid seeds. When using the Au nanoframes with a closed head, the longitudinal growth of the Ag atoms is clearly limited by the hard template, leading to the formation of thick Ag nanorods with a five-fold twinned structure. The soft template starts to influence the growth process when the head structure of the Au nanoframes becomes hollow. In particular, the confinement effect of the hard template can be completely broken by selectively strengthening the role of the soft template, promoting the production of slender Ag nanorods similar to the results obtained in the absence of the hard template. Our results indicate that the morphology of the Ag nanostructures depends on the competition between the qualitatively confined energies of the hard and soft templates during the template-directed growth process. Moreover, this confined growth mechanism is also verified by the successful construction of various Ag nanostructures. The understanding of the collaborative competition mechanism between the soft and hard templates presents a great opportunity to construct novel Ag nanostructures through a template-directed method.

Magnetic/Plasmonic Hybrid Nanodisks with Dynamically Tunable Mechano-Chiroptical Responses

Chiral plasmonic nanostructures have promising applications in optoelectronics due to their chiroptical responses. However, achieving active tuning of optical chirality remains challenging. Here, we develop stretchable chiroptical films with mechanically tunable extrinsic chirality by assembling hexagonal magnetic/plasmonic hybrid nanodisks in magnetic fields. The nanodisks, synthesized using a space-confined growth method, display three distinct plasmonic resonance modes at the UV-vis-NIR region, which red shift with increasing size as demonstrated by simulation and experimental results. The coupled magnetic and plasmonic anisotropy allows convenient control over the plasmonic resonance modes by altering the strength or direction of external magnetic fields. Further, magnetically aligning the nanodisks in a stretchable polymer film produces superstructures with extrinsic chirality, displaying selective absorption of circularly polarized light and inverted circular dichroism due to the linear dichroism-linear birefringence effect. Reversible mechanical stretching allows for continuous switching of circular dichroism in a wide range (from -1° to +1°). The efficient magnetic alignment of hybrid nanodisks in the hydrogel provides a simple and effective strategy for designing stretchable optical devices with tunable extrinsic chirality.

Silver Nanocrystal Array with Precise Control via Star-like Copolymer Nanoreactors

Silver nanocrystal arrays had attracted much attention due to the unique plasmonic effect of their ordered nanostructure and the synergy among adjacent nanocrystals. Conventional preparation methods had several limitations, such as high cost, harsh preparation conditions, and complicated influencing factors, which could not be employed to fabricate the nanocrystal arrays in highly controlled fashion. To solve these issues, we reported ordered arrays of different Ag nanocrystals with precise control prepared by utilizing amphiphilic star-like poly(4-vinylpyridine)-block-polystyrene diblock copolymers as nanoreactors synthesized by sequential atom transfer radical polymerization. Moreover, this unimolecular nanoreactor method based on star-like copolymers with stable and predesigned nanostructures was proved to be a universal approach to prepare other nanocrystal arrays. This strategy had low cost, simple process flow, wide applicability, and structural stability that could fabricate nanocrystal array with precise control and continuously prepare more complex nanostructure units in a large scale to meet different functions and applications.

Morphological Transitions in Micelles of Amphiphilic Bottlebrushes upon the Adsorption and Compression at the Liquid Interface

Densely grafted comb-like macromolecules (bottlebrushes) with alternating solvophobic and solvophilic side chains were studied in a selective solvent and at the liquid interface using mesoscopic computer simulations. The effects of backbone length and copolymer composition were considered. While self-assembly in solution revealed only spherical aggregates for all ar-chitectures studied, adsorption onto the liquid interface in particular cases resulted in morpho-logical changes, with worm-like aggregates or a continuous monolayer observed. In turn, the compression of macromolecules at the interface also leads to morphological transitions, includ-ing the formation of a mesh-like percolated structure. The obtained results may be useful for the preparation of solid nanoparticles of anisotropic shape or nanostructured ultra-thin copolymer films.

Long-term integrated soil-crop management improves soil microbial community structure to reduce GHG emission and increase yield

Integrated soil-crop management (ISCM) has been shown as an effective strategy to increase efficiency and yield while its soil microbial community structure and function remain unclear. We evaluated changes in soil physicochemical factors, bacterial community structure responses, and the contributions of soil properties and bacterial communities to summer maize-winter wheat yield and GHG emissions through an ISCM experiment [T1 (local smallholder farmers practice system), T2 (improved management system), T3 (high-yield production system), and T4 (optimized management system)], which could provide scientific guidance for sustainable development of soil in summer maize-winter wheat rotation system. The results showed that the optimized ISCM could improve the soil quality, which significantly changed the soil bacterial community structure to reduce GHG emissions and increase yield. The co-occurrence network density of T3 was increased significantly. The Acidobacteria (class) and OM190 (class) were enriched in T2 and T4. The Frankiales (order) and Gaiellales (order) were enriched in T3. However, the changes in different crop growth stages were different. At the wheat jointing stage and maize mature stage, T4 could enhance carbon-related functional groups, such as aromatic hydrocarbon degradation and hydrocarbon degradation, to increase the soil organic carbon content. And at the maize tasseling stage, T4 could enhance nitrogen-related functional groups. And soil bacteria structure and function indirectly affected annual yield and GHG emission. T2 and T4 exhibited a similar soil microbial community. However, the yield and nitrogen use efficiency of T2 were reduced compared to those of T4. The yield of T3 was the highest, but the GHG emission increased and soil pH and nitrogen use efficiency decreased significantly. Therefore, T4 was a suitable management system to improve soil quality and soil bacterial community structure and function to decrease GHG emissions and increase the yield of the summer maize-winter wheat rotation system.

A grafting-from strategy for the synthesis of bottlebrush nanofibers from organic semiconductors

Bottlebrush polymers with optoelectronic function show promise for applications in photonic crystals, nanomedicine, and encoding of information. In particular, bottlebrush polymers formed from organic semiconductors give wire-like nanoparticles where band gaps, fluorescence, and energy transfer can be tuned. To date, such bottlebrush polymers have largely been prepared by grafting-through polymerization of organic semiconductor macromonomers, where pre-synthesized side chains are polymerized along a bottlebrush backbone. While this approach provides high side-chain grafting densities, the length of bottlebrush polymers that is possible to obtain is limited by steric crowding at the propagating chain end. Here, we describe methods for preparing ultralong bottlebrush nanofibers from organic semiconductors, with backbone lengths approaching 800 repeating units and molecular weights in excess of 4 MDa. By combining reversible addition fragmentation chain transfer and Cu(0) reversible deactivation radical polymerization, a “grafting-from” protocol is described where monomers can be grown from a pre-synthesized backbone. Bottlebrush polymers were prepared from organic semiconductors used as n-type, p-type, and host materials in multilayer organic devices. Finally, a two-component bottlebrush polymer exhibiting deep blue emission, two-photon fluorescence, and a quantum yield of unity is also prepared by this method.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Necklace-Like Nanostructures: From Fabrication, Properties to Applications

The shape-controlled synthesis of nanocrystals remains a hot research topic in nanotechnology. Particularly, the fabrication of 1D structures such as wires, rods, belts, and tubes has been an interesting and important subject within nanoscience in the last few decades. 1D necklace-like micro/nanostructures are a sophisticated geometry that has attracted increasing attention due to their anisotropic and periodic structure, intrinsic high surface area, abundant transport channels, exposure of each component to the surface, and multiscale roughness of the surface. These characteristics enable their unique electrical, optical, and catalytic properties. This review provides a comprehensive summary of the advanced research progress on the fabrication strategies, novel properties, and various applications of necklace-like structures. It begins with the main fabrication methods of necklace-like structures and subsequently details a variety of their properties and applications. It concludes with the authors' perspectives on future research and development of the necklace-like structures.

Block Co-PolyMOC Micelles and Structural Synergy as Composite Nanocarriers

Conventional micelles of amphiphilic block copolymers (BCPs) disassemble into individual polymer chains upon dilution to a critical concentration, which causes the premature release of the encapsulated drugs and reduces the drug's bioavailability. Here, by integrating the emerging metal-organic cage (MOC) materials with BCPs, we introduce a new type of composite micellar nanoparticles, block co-polyMOC micelles (or BCPMMs), that are self-assembled in essence yet remarkably stable against dilution. BCPMMs are fabricated via a stepwise assembly strategy that combines MOCs and BCPs in a well-defined, unimolecular core-shell structure. The synergistical interplay between the two components accounts for the particle stability: the MOC core holds BCPs firmly in place and the BCPs increase the MOC's bioavailability. When used as nanocarriers for anticancer drugs, BCPMMs showed an extended blood circulation, a favorable biodistribution, and eventually an improved treatment efficacy in vivo. Given the versatility in designing MOCs and BCPs, we envision that BCPMMs can serve as a modular platform for robust, multifunctional, and tunable nanomedicine.

Influences of the Periodicity in Molecular Architecture on the Phase Diagrams and Microphase Transitions of the Janus Double-Brush Copolymer with a Loose Graft

The backbone of the Janus double-brush copolymer may break during long-term service, but whether this breakage affects the self-assembled phase state and microphase transitions of the material is still unknown. For the Janus double-brush copolymers with a periodicity in molecular architecture ranging from 1 to 10, the influences of the architectural periodicity on their phase diagrams and order–disorder transitions (ODT) were investigated by the self-consistent mean field theory (SCFT). In total, nine microphases with long-range order were found. By comparing the phase diagrams between copolymers of different periodicity, a decrease in periodicity or breakage along the copolymer backbone had nearly no influence on the phase diagrams unless the periodicity was too short to be smaller than 3. For copolymers with neutral backbones, a decrease in periodicity or breakage along the copolymer backbone reduced the critical segregation strengths of the whole copolymer at ODT. The equations for the critical segregation strengths at ODT, the architectural periodicity, and the volume fraction of the backbone were established for the Janus double-brush copolymers. The theoretical calculations were consistent with the previous theoretical, experimental, and simulation results.

An NIR-II Photothermally Triggered "Oxygen Bomb" for Hypoxic Tumor Programmed Cascade Therapy

Hypoxia, as a characteristic feature of solid tumors, has a close relationship with tumor resistance to photodynamic therapy (PDT) and chemotherapy. Perfluorocarbon (PFC) is reported to relieve hypoxic in solid tumors by acting as an oxygen carrier via several nanostructures. However, the oxygen delivery process is mostly driven by a concentration gradient, which is uncontrollable. Herein, a photothermally controlled "oxygen bomb" PSPP-Au₉₈₀ -D is designed by encapsulating a PFC core within a functionalized bilayer polymer shell. Near-infrared second window photothermal agent gold nanorods with excellent photo-to-heat energy-conversion ability are fabricated on the surface of the polymer shell via an innovative modified two-step seedless ex situ growth process to thermally trigger O₂  release. Then, a programmed cascade therapy strategy is customized for hypoxic orthotopic pancreatic cancer. First, PSPP-Au₉₈₀ -D is irradiated by a 980 nm laser to photothermally trigger O₂  infusing into the hypoxic tumor microenvironment, which is accompanied by local hyperemia and doxorubicin release. Subsequently, a 680 nm laser is used to generate singlet oxygen in the oxygenated tumor microenvironment for PDT. This choreographed programmed cascade therapy strategy will provide a new route for suppressing hypoxic tumor growth under mild conditions based on controllable and effective oxygen release.

Combination of cellulose and plant oil toward sustainable bottlebrush copolymer elastomers with tunable mechanical performance

In this work, sustainable cellulose-g-poly(lauryl acrylate-co-acrylamide) [Cell-g-P(LA-co-AM)] bottlebrush copolymer elastomers derived from cellulose and plant oil were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Differential scanning calorimeter (DSC) results indicate that these thermally stable Cell-g-P(LA-co-AM) bottlebrush copolymer elastomers show adjustable melting temperatures. Monotonic and cyclic tensile tests suggest that the mechanical properties, including tensile strength, extensibility, Young's modulus, and elasticity, can be conveniently controlled by changing the LA/AM feed ratio and cellulose content. In such kind of bottlebrush copolymer elastomers, the rigid cellulose backbones act as cross-linking points to provide tensile strength. The incorporated PAM segments can form additional network structure via hydrogen bonding, resulting in enhanced tensile strength but decreased extensibility when more PAM segments are introduced. This versatile strategy can promote the development of sustainable cellulose-based bottlebrush copolymer elastomers from renewable resources.

Interfacial Self-Assembly of Amphiphilic Core-Shell Bottlebrush Block Copolymers Toward Responsive Photonic Balls Bearing Ionic Channels

Photonic balls can be facilely obtained through interfacial self-assembly of amphiphilic bottlebrush block polymers (BBCPs) within a water-in-oil-in-water (w/o/w) multiple emulsion system, and polystyrene (PS) has been employed as the skeleton of the balls showing no responsive properties. Here, we demonstrate the design and synthesis of core-shell BBCPs with a poly(tert-butyl acrylate)-block-polystyrene (PtBA-b-PS) block copolymer as the hydrophobic side chains and poly(ethylene glycol) (PEG) as the hydrophilic block. Interfacial self-assembly of the core-shell BBCPs within shrinking droplets produces porous microspheres with full-spectrum structural colors through an organized spontaneous emulsification (OSE) process. The PtBA core wrapped by PS in the skeleton of the balls can be converted into polyacrylic acid (PAA) forming an ionic channel responsive to pH variations. Consequently, the hydrolyzed photonic balls show different colors under different pH conditions dependent on varied degrees of ionization and hydration of the PAA channel. Reflected colors can be verified using an optical spectrometer, providing an effective strategy for precise pH indication. This article is protected by copyright. All rights reserved.

Advances in Self-Powered Ultraviolet Photodetectors Based on P-N Heterojunction Low-Dimensional Nanostructures

Self-powered ultraviolet (UV) photodetectors have attracted considerable attention in recent years because of their vast applications in the military and civil fields. Among them, self-powered UV photodetectors based on p-n heterojunction low-dimensional nanostructures are a very attractive research field due to combining the advantages of low-dimensional semiconductor nanostructures (such as large specific surface area, excellent carrier transmission channel, and larger photoconductive gain) with the feature of working independently without an external power source. In this review, a selection of recent developments focused on improving the performance of self-powered UV photodetectors based on p-n heterojunction low-dimensional nanostructures from different aspects are summarized. It is expected that more novel, dexterous, and intelligent photodetectors will be developed as soon as possible on the basis of these works.

Simultaneous Synthesis and Self-Assembly of Bottlebrush Block Copolymers at Room Temperature via Photoinitiated RAFT Dispersion Polymerization

Bottlebrush polymers exhibiting unique properties have attracted considerable attention for applications in many research areas. Herein, we report the first simultaneous synthesis and self-assembly of bottlebrush block copolymers at room temperature via photoinitiated polymerization-induced self-assembly (photo-PISA) using multifunctional macromolecular chain transfer agents (macro-CTAs). Compare with linear block copolymers, the bottlebrush block copolymers could promote the formation of higher-order morphologies (e.g. vesicles) when targeting similar degrees of polymerization (DPs). Moreover, a higher polymerization rate was observed in the case of bottlebrush block copolymers. Gel permeation chromatography (GPC) analysis showed that good polymerization control was maintained when synthesizing bottlebrush block copolymers by photo-PISA. Finally, the obtained bottlebrush block copolymer vesicles were used as seeds for further chain extension and multicomponent nanoparticles with a sponge internal structure were formed. We expect this study will not only expand polymer architectures employed in PISA, but also provides a new strategy to synthesize polymer nanoparticles with unique structures. This article is protected by copyright. All rights reserved.

Bottlebrush Polymers Based on RAFT and the "C1" Polymerization Method: Controlled Synthesis and Application in Anticancer Drug Delivery

In this work, we reported a strategy to synthesize well-defined bottlebrush polymers. Diazoacetate macromonomers of polystyrene (1-PS_n) with controlled molecular weights were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The diazo can tolerate the RAFT polymerization conditions and remained on the chain end of the yielded PS macromonomer. The terminal diazo groups of the macromonomer were polymerized by the allyl PdCl/L catalyst to afford well-defined bottlebrush polymers ((1-PS_n)_ms) carrying a side chain on each backbone atom. Meanwhile, an amphiphilic bottlebrush polymer containing brush-shaped PS and polyethylene glycol (PEG) was synthesized by polymerization of the diazoacetate macromonomer of PEG (2-PEG) using Pd(II)-terminated (1-PS_n)_m as the macroinitiator. The yielded amphiphilic (1-PS₃₀)₅₀-b-(2-PEG)₁₀₀ could self assemble into a well-defined core-shell micelle in aqueous solutions. The hydrodynamic diameter of the micelle was ca. 146 nm and had good biocompatibility. These results indicate the micelles have great potential in drug delivery.

Cell Sheet-Like Soft Nanoreactor Arrays

Tissues, which consist of groups of closely packed cell arrays, are essentially sheet-like biosynthesis plants. In tissues, individual cells are discrete microreactors working under highly viscous and confined environments. Herein, soft polystyrene-encased nanoframe (PEN) reactor arrays, as analogous nanoscale "sheet-like chemosynthesis plants", for the controlled synthesis of novel nanocrystals, are reported. Although the soft polystyrene (PS) is only 3 nm thick, it is elastic, robust, and permeable to aqueous solutes, while significantly slowing down their diffusion. PEN-associated palladium (Pd) crystallization follows a diffusion-controlled zero-order kinetics rather than a reaction-controlled first-order kinetics in bulk solution. Each individual PEN reactor has a volume in the zeptoliter range, which offers a unique confined environment, enabling a directional inward crystallization, in contrast to the conventional outward nucleation/growth that occurs in an unconfined bulk solution. This strategy makes it possible to generate a set of mono-, bi-, and trimetallic, and even semiconductor nanocrystals with tunable interior structures, which are difficult to achieve with normal systems based on bulk solutions.

Multicolor Photonic Pigments for Rotation-Asymmetric Mechanochromic Devices

Photonic crystals are extensively explored to replace inorganic pigments and organic dyes as coloring elements in printing, painting, sensing, and anti-counterfeiting due to their brilliant structural colors, chemical stability, and environmental friendliness. However, most existing photonic-crystal-based pigments can only display monochromatic colors once made, and generating multicolors has to start with designing different building blocks. Here, a novel photonic pigment featuring highly tunable structural colors in the entire visible spectrum, made by the magnetic assembly of monodisperse nanorods into body-centered-tetragonal photonic crystals, is reported. Their prominent magnetic and crystal anisotropy makes it efficient to generate multicolors using one photonic pigment by magnetically controlling the crystal orientation. Further, the combination of angle-dependent diffraction and magnetic orientation control enables the design of rotation-asymmetric photonic films that display distinct patterns and encrypted information in response to rotation. The efficient multicolor generation through precise orientational control makes this novel photonic pigment promising in developing high-performance structural-colored materials and optical devices.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Dual Tumor Microenvironment Remodeling by Glucose-Contained Radical Copolymer for MRI-Guided Photoimmunotherapy

Aberrant glucose metabolism and immune evasion are recognized as two hallmarks of cancer, which contribute to poor treatment efficiency and tumor progression. Herein, a novel material system consisting of a glucose and TEMPO (2,2,6,6-tetramethylpiperidin-1-yl)oxyl) at the distal ends of PEO-b-PLLA block copolymer (glucose-PEO-b-PLLA-TEMPO), is designed to encapsulate clinical therapeutics CUDC101 and photosensitizer IR780. The specific core-shell rod structure formed by the designed copolymer renders TEMPO radicals excellent stability against reduction-induced magnetic resonance imaging (MRI) silence. Tumor-targeting moiety endowed by glucose provides the radical copolymer outstanding multimodal imaging capabilities, including MRI, photoacoustic imaging, and fluorescence imaging. Efficient delivery of CUDC101 and IR780 is achieved to synergize the antitumor immune activation through IR780-mediated photodynamic therapy (PDT) and CUDC101-triggered CD47 inhibition, showing M1 phenotype polarization of tumor-associated macrophages (TAMs). More intriguingly, this study demonstrates PDT-stimulated p53 can also re-educate TAMs, providing a combined strategy of using dual tumor microenvironment remodeling to achieve the synergistic effect in the transition from cold immunosuppressive to hot immunoresponsive tumor microenvironment.

Catalyzed Growth for Atomic-Precision Colloidal Chalcogenide Nanowires and Heterostructures: Progress and Perspective

One-dimensional colloidal semiconductor nanowires are of wide interest in nanoscale electronics and photonics. As compared to the zero-dimensional counterparts, their geometrical anisotropy offers an additional degree of freedom to tailor the electronic and optical properties and enables customized heterostructures with increased complexity. The colloidal synthetic chemistry developed over past decades has fueled the emergence of diverse one-dimensional nanocrystals and heterostructures, whereas the synthetic pursuit for compositionally and structurally defining them at the atomic-level precision remains yet a giant challenge. Catalyzed growth, wherein nanowires grow at the catalyst-nanowire interfaces in a layer-by-layer manner, offers a promising path toward such an ultimate goal. In this Perspective, we will take a close look at how catalyzed growth would enable the on-demand, atomic-precision control of colloidal nanowires and their heterostructures. We then further highlight their potentials for constructing higher-order heteroarchitectures with new and/or enhanced performances. Finally, we conclude with a forward-looking perspective on future challenges.

Charge-Driven Self-Assembly of Polyelectrolyte-Grafted Nanoparticles in Solutions

Nanoparticle self-assembly in solution has gained immense interest due to the enhanced optical, chemical, magnetic, and electrical properties which manifest at the macroscale. Material properties in bulk are a direct consequence of the morphology of these nanoparticles in solutions. Precise control on the orientation, spatial arrangement, shape, size, composition, and control over the interactions of individual nanoparticles play a key role in enhancing their properties. While previous studies have used asymmetry in the nanoparticle and/or the use of linker grafts, nanoparticles grafted with polyelectrolyte grafts provide us a wide parameter space to control and tune their self-assembly in solutions. In this study, we have performed coarse-grained molecular dynamics simulations to understand the charge-driven self-assembly of spherical nanoparticles grafted with polyelectrolyte chains. Nanoparticles grafted with either positively or negatively charged polyelectrolyte chains self-assemble to different structures driven by both excluded volume and electrostatic interactions. Our study shows that by tuning the graft density, the chain length, and the charge density of the grafts, we could build and control a variety of self-assembled structures ranging from rings, dimers, strings, coil-like aggregates, and disordered-to-ordered aggregates.

Lithium-Conducting Branched Polymers: New Paradigm of Solid-State Electrolytes for Batteries

The past decades have witnessed rapid development of lithium-based batteries. Significant research efforts have been progressively diverted from electrodes to electrolytes, particularly polymer electrolytes (PEs), to tackle the safety concern and promote the energy storage capability of batteries. To further increase the ionic conductivity of PEs, various branched polymers (BPs) have been rationally designed and synthesized. Compared with linear polymers, branched architectures effectively increase polymer segmental mobility, restrain crystallization, and reduce chain entanglement, thereby rendering BPs with greatly enhanced lithium transport. In this Mini Review, a diversity of BPs for PEs is summarized by scrutinizing their unique topologies and properties. Subsequently, the design principles for enhancing the physical properties, mechanical properties, and electrochemical performance of BP-based PEs (BP-PEs) are provided in which the ionic conduction is particularly examined in light of the Li⁺ transport mechanism. Finally, the challenges and future prospects of BP-PEs in this rapidly evolving field are outlined.

Variations in bacterial taxonomic profiles and potential functions in response to the gut transit of earthworms (Eisenia fetida) feeding on cow manure

Earthworms play an important role in the organic matter decomposition in terrestrial ecosystems. Earthworms interact directly with the microorganisms to affect the organic matter decomposition via gut transit, i.e., the digestion and assimilation of organic matter in the foregut and midgut and its excretion by the hindgut. However, how the microbial community ingested by earthworms respond to the transit processes in different gut segments of earthworms is not clear. We used composted cow manure to feed earthworms and sampled vermicompost and the contents of foregut, midgut and hindgut for bacterial 16S rRNA gene sequencing analysis. We observed that earthworm gut transit decreased the abundances of the dominant phyla Proteobacteria and Bacteroidetes but increased Actinobacteria, Chloroflexi and Acidobacteria. The alpha diversity of bacterial community in midgut was the lowest of the different gut segments, and the bacterial community structure of the foregut was significantly different from the midgut and hindgut. The enrichment analysis results revealed different selective stimulatory and inhibitory effects on the ingested bacterial community in the different gut segments, which extended to vermicompost. The FAPROTAX data indicated that C and N metabolic microbes were enriched in the earthworm gut. Microbes involved in fermentation and methanogenesis were enriched in the hindgut, and denitrification microbes were enriched in the foregut. The N metabolism microbes in vermicompost were significantly enriched after the stimulation of earthworm gut transit (P < 0.05), and the pathogenic microbes of animals and plants were inhibited. Combined with the results of subsequent correlation and biochemical analyses, earthworm gut transit significantly altered the structure and function of the bacterial community to accelerate the degradation and mineralization of organic matter and the enrichment of phosphorus and potassium. Our study suggests that the gut transit process of earthworms plays an important role in regulating organic matter dynamics in terrestrial ecosystems.

Coupling morphological and magnetic anisotropy for assembling tetragonal colloidal crystals

Morphological and magnetic anisotropy can be combined in colloidal assembly to create unconventional secondary structures. We show here that magnetite nanorods interact along a critical angle, depending on their aspect ratios and assemble into body-centered tetragonal colloidal crystals. Under a magnetic field, size-dependent attractive and repulsive domains develop on the ends and center of the nanorods, respectively. Our joint experiment-computational multiscale study demonstrates the presence of a critical angle in the attractive domain, which defines the equilibrium bonding states of interacting rods and leads to the formation of non–close-packed yet hard-contact tetragonal crystals. Small-angle x-ray scattering measurement attributes the perfect tetragonal phase to the slow assembly kinetics. The crystals exhibit brilliant structural colors, which can be actively tuned by changing the magnetic field direction. These highly ordered frameworks and well-defined three-dimensional nanochannels may offer new opportunities for manipulating nanoscale chemical transformation, mass transportation, and wave propagation.