Cooperative carbon capture and steam regeneration with tetraamine-appended metal-organic frameworks

Nanoconfinement-Driven Energy-Efficient CO2 Capture and Release at High Pressures on a Unique Large-Pore Mesoporous Carbon

Although microporous carbons can perform well for CO2 separations under high pressure conditions, their energy-demanding regeneration may render them a less attractive material option. Here, we developed a large-pore mesoporous carbon with pore sizes centered around 20-30 nm using a templated technical lignin. During the soft-templating process, unique cylindrical supramolecular assemblies form from the copolymer template. This peculiar nanostructuring takes place due to the presence of polyethylene glycol (PEG) segments on both the Pluronic® template and the PEG-grafted lignin derivative (glycol lignin). A large increase in CO2 uptake occurs on the resulting large-pore mesoporous carbon at 270 K close to the saturation pressure (3.2 MPa), owing to capillary condensation. This phenomenon enables a CO2/CH4 selectivity (SCO2/CH4, mol/mol) of 3.7 at 270 K and 3.1 MPa absolute pressure, and a swift pressure swing regeneration process with desorbed CO2 per unit pressure far outperforming a benchmark activated carbon (i.e., notably rapid decrease in the amount of adsorbed CO2 with decreasing pressure). We propose large-pore mesoporous carbons as a novel family of CO2 capture adsorbents, based on the phase-transition behavior shift of CO2 in the nanoconfined environment. This novel material concept may open new horizons for physisorptive CO2 separations with energy-efficient regeneration options.

Multivariate Tuning of Photosensitization in Mixed-Linker Metal-Organic Frameworks for Efficient CO2 Reduction

Photosensitization is a powerful approach for enhancing the photocatalyst performance by improving light absorption, energy transfer, and charge separation. However, achieving high efficiency requires precise control over photosensitizers, catalytic centers, and their interactions, which remain challenging in heterogeneous systems. Herein, we develop multivariate zirconium metal-organic frameworks (MOFs) with mixing linkers and tunable defects that enable unprecedented control over photosensitizers, catalytic centers, and their ratios, creating an efficient platform for CO2 reduction. These MOFs integrate triphenylamine, phenoxazine, or phenothiazine-based linkers as photosensitizers and metal porphyrin linkers (metal = Fe, Co, Ni, and Zn) as CO2 reduction catalytic centers. Furthermore, the defect tolerance of robust Zr6 nodes allows for a systematic variation in linker ratios by introducing missing linker defects. By fine-tuning the photosensitizers, catalytic metal centers, and their ratios, we achieved an optimized photocatalyst with CO2-to-CO reduction rates of 247.8 μmol gcat.-1 h-1, representing a 17-fold enhancement over homogeneous analogues. Transient spectra and density functional theory calculations reveal the critical role of the framework structure in promoting efficient intrareticular energy transfer and charge separation. This study highlights the unique advantage of MOF platforms in the multivariate tuning of photocatalysts, paving the way for advanced artificial photosynthetic systems.

Amine-Functionalized Defective MOFs for Direct Air Capture by Postsynthetic Modification

Amine-functionalized defective metal-organic frameworks (DM) showed promise for direct air capture (DAC) of CO2 under ambient conditions. In this work, chromium-based DM was functionalized via a two-step postsynthetic modification with ethylenediamine (EDA), tris(2-aminoethyl)amine (TAEA), and polyethylene-polyamines (PEPA). Characterization by Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (PXRD), and scanning electron microscopy (SEM) confirmed successful synthesis and structural integrity. Among the samples, 1:1-PEPA-DM exhibited the best performance, with a CO2 adsorption capacity of 1.26 mmol/g, a regeneration energy of 75.1 kJ/mol, and only 26.62% capacity loss after 12 cycles in ambient air. In contrast, 1:1-TAEA-DM showed a high regeneration energy (158.61 kJ/mol) and a 95.17% capacity loss. Physically impregnating PEPA resulted in a lower capacity (0.94 mmol/g) and a loss of 76.32% after 12 cycles. These results highlight covalent PEPA grafting as a promising strategy for developing durable DAC sorbents.

Electrosynthesis of pure urea from pretreated flue gas in a proton-limited environment established in a porous solid-state electrolyte electrolyser

The electrosynthesis of pure urea via the co-reduction of CO2 and N2 remains challenging. Here we show that a proton-limited environment established in an electrolyser equipped with porous solid-state electrolyte, devoid of an aqueous electrolyte, can suppress the hydrogen evolution reaction and excessive hydrogenation of N2 to ammonia. This can instead be conducive to the C-N coupling of *CO2 with *NHNH (the intermediate from the semi-hydrogenation of N2), thereby facilitating the production of urea. By using nanosheets of an ultrathin two-dimensional metal-azolate framework with cyclic heterotrimetal clusters as catalyst, the Faradaic efficiency of urea production from pretreated flue gas (which contains mainly 85% N2 and 15% CO2) is as high as 65.5%, and no ammonia and other liquid products were generated. At a low cell voltage of 2.0 V, the current can reach 100 mA, and the urea production rate is as high as 5.07 g gcat-1 h-1 or 84.4 mmol gcat-1 h-1. Notably, it can continuously produce 6.2 wt% pure urea aqueous solution for at least 30 h, and about 1.24 g pure urea solid was obtained. The use of pretreated flue gas as a direct feedstock significantly reduces input costs, and the high reaction rate and selectivity contribute to a reduction in system scale and operational costs.

Selective adsorption of CO2 in TAMOF-1 for the separation of CO2/CH4 gas mixtures

TAMOF-1 is a robust, highly porous metal-organic framework built from Cu2+ centers linked by a L-histidine derivative. Thanks to its high porosity and homochirality, TAMOF-1 has shown interesting molecular recognition properties, being able to resolve racemic mixtures of small organic molecules in gas and liquid phases. Now, we have discovered that TAMOF-1 also offers a competitive performance as solid adsorbent for CO2 physisorption, offering promising CO2 adsorption capacity ( > 3.8 mmol g-1) and CO2/CH4 Ideal Adsorbed Solution Theory (IAST) selectivity ( > 40) at ambient conditions. Moreover, the material exhibits favorable adsorption kinetics under dynamic conditions, demonstrating good stability in high-humidity environments and minimal degradation in strongly acidic media. We have identified the key interactions of CO2 within the TAMOF-1 framework by a combination of structural (neutron diffraction), spectroscopic and theoretical analyses which conclude a dual-site adsorption mechanism with the majority of adsorbed CO2 molecules occupying the empty voids in the TAMOF-1 channels without strong, directional supramolecular interactions. This very weak dominant binding opens the possibility of a low energy regeneration process for convenient CO2 purification. These features identify TAMOF-1 as a viable solid-state adsorbent for the realization of affordable biogas upgrading.

Lowering Linker Symmetry to Access Zirconium Metal-Organic Frameworks for Inverse Alkane/Alkene Separations

Enriching the structural diversity of metal-organic frameworks (MOFs) is of great importance in developing functional porous materials with specific properties. New MOF structures can be accessed through the rational design of organic linkers with diverse geometric conformations, and their structural complexity can be enhanced by choosing linkers with reduced symmetry. Herein, a series of Zr-based MOFs with unprecedented topologies were developed through a linker desymmetrization and conformation engineering approach. A tritopic carboxylate linker with reduced symmetry and flexible triangular geometry was designed to construct three Zr-based MOFs (denoted as NU-57, NU-58, and NU-59) by modulating synthetic conditions. Notably, the conformational flexibility and reduced symmetry of the linker generated two unprecedented topologies in NU-58 and NU-59. Furthermore, solvent removal in NU-58 via thermal activation process produced missing linker defects. Finally, the adsorption behavior of these MOFs toward alkanes and alkenes was studied to gain insights into their structure-property relationships, which demonstrated that NU-57 and NU-58 exhibit unusual reverse selectivity for alkanes in alkane/alkene separations. Overall, this work highlights the rational design of linkers using a desymmetrization strategy as a powerful method to enrich the structural diversity of MOFs and to access novel MOFs with unique properties.

Phase Change-Mediated Capture of Carbon Dioxide from Air with a Molecular Triamine Network Solid

The efficient removal of CO2 from exhaust streams and even directly from air is necessary to forestall climate change, lending urgency to the search for new materials that can rapidly capture CO2 at high capacity. The recent discovery that diamine-appended metal-organic frameworks can exhibit cooperative CO2 uptake via the formation of ammonium carbamate chains begs the question of whether simple organic polyamine molecules could be designed to achieve a similar switch-like behavior with even higher separation capacities. Here, we present a solid molecular triamine, 1,3,5-tris(aminomethyl)benzene (TriH), that rapidly captures large quantities of CO2 upon exposure to humid air to form the porous, crystalline, ammonium carbamate network solid TriH(CO2)1.5·xH2O (TriHCO2). The phase transition behavior of TriH converting to TriHCO2 was studied through powder and single-crystal X-ray diffraction analysis, and additional spectroscopic techniques further verified the formation of ammonium carbamate species upon exposing TriH to humid air. Detailed breakthrough analyses conducted under varying temperatures, relative humidities, and flow rates reveal record CO2 absorption capacities as high as 8.9 mmol/g. Computational analyses reveal an activation barrier associated with TriH absorbing CO2 under dry conditions that is lowered under humid conditions through hydrogen bonding with a water molecule in the transition state associated with N-C bond formation. These results highlight the prospect of tunable molecular polyamines as a new class of candidate absorbents for high-capacity CO2 capture.

Benchmarking selective capture of trace CO2 from C2H2 using an amine-functionalized adsorbent

Purifying C2H2 by removing trace CO2 is critically needed yet challenged by their analogous physical properties. Herein, we report a commercial resin adsorbent HP20 (Diaion® HP-20 Resin) loaded with polyethyleneimine (PEI@HP20) which selectively captures trace CO2 and excludes C2H2. PEI@HP20 possesses a high CO2 adsorption capacity (4.35 mmol/g) at 100 kPa and 298 K and a record CO2/C2H2 uptake ratio compared with all reported CO2-selective adsorbents. The ideal adsorbed solution theory selectivity reaches 1.33×107. The pilot-scale pressure-temperature swing adsorption on 2 kg PEI@HP20 further validated that it can obtain >99.99% purity C2H2 from CO2/C2H2(1/99, v/v) mixtures with a high yield of 344.7 g per cycle. The combination of multinuclear solid-state Nuclear Magnetic Resonance, Fourier Transform infrared spectroscopy and density functional theory calculations reveal that the performance of PEI@HP20 relies on a dual chemisorption/physisorption mechanism. This work highlights a promising method to develop green, low cost, high efficiency, and readily scalable CO2-selective adsorbent.

Hydrophobic Metal-Formate Composites for Efficient CO2 Capture

Carbon capture, utilization, and sequestration (CCUS) have emerged as pivotal mitigation strategies in addressing climate change induced by greenhouse gas emissions. In this pursuit, our objective is to enhance the efficacy of adsorptive CO2 capture by harnessing state-of-the-art framework sorbents engineered for exceptional CO2 selectivity, high intrinsic stability in the presence of moisture, and facile regeneration. To this end, a series of ultramicroporous mixed aluminum and iron formate framework materials, Fe-ALFs, were synthesized. Furthermore, their moisture stability has been significantly enhanced by passivation with polyvinylidene fluoride (Fe-ALF-PVDF). Gas sorption and breakthrough measurements demonstrate that Fe-ALF-PVDF exhibits outstanding CO2 adsorption capacities (4.6 mmol/g at 298 K) and remarkable CO2/N2 selectivity (387). In addition, it can be economically produced from readily available chemicals and is easy to regenerate. Fe-ALF-PVDF presents an innovative adsorbent material for efficiently capturing CO2 from humid postcombustion flue gases and other moisture-rich gas streams.

Spiers Memorial Lecture: NMR crystallography

Chemical function is directly related to the spatial arrangement of atoms. Consequently, the determination of atomic-level three-dimensional structures has transformed molecular and materials science over the past 60 years. In this context, solid-state NMR has emerged to become the method of choice for atomic-level characterization of complex materials in powder form. In the following we present an overview of current methods for chemical shift driven NMR crystallography, illustrated with applications to complex materials.

Sequential Pore Functionalization in MOFs for Enhanced Carbon Dioxide Capture

The capture of carbon dioxide (CO2) is crucial for reducing greenhouse emissions and achieving net-zero emission goals. Metal-organic frameworks (MOFs) present a promising solution for carbon capture due to their structural adaptability, tunability, porosity, and pore modification. In this research, we explored the use of a copper (Cu(II))-based MOF called m CBMOF-1. After activation, m CBMOF-1 generates one-dimensional channels with square cross sections, featuring sets of four Cu(II) open metal sites spaced by 6.042 Å, allowing strong interactions with coordinating molecules. To investigate this capability, m CBMOF-1 was exposed to ammonia (NH3) gas, resulting in hysteretic NH3 isotherms indicative of strong interactions between Cu(II) and NH3. At 150 mbar and 298 K, the NH3-loaded (∼1 mmol/g) material exhibited a 106% increase in CO2 uptake compared to that of the pristine m CBMOF-1. Carbon-13 solid-state nuclear magnetic resonance spectra and density functional theory calculations confirmed that the sequential loading of NH3 followed by CO2 adsorption generated a copper-carbamic acid complex within the pores of m CBMOF-1. Our study highlights the effectiveness of sequential pore functionalization in MOFs as an attractive strategy for enhancing the interactions of MOFs with small molecules such as CO2.

Multivariate Flexible Metal-Organic Frameworks and Covalent Organic Frameworks

Precise control of the void environment, achieved through multiple functional groups and enhanced by structural adaptations to guest molecules, stands at the forefront of scientific inquiry. Flexible multivariate open framework materials (OFMs), including covalent organic frameworks and metal-organic frameworks, meet these criteria and are expected to play a crucial role in gas storage and separation, pollutant removal, and catalysis. Nevertheless, there is a notable lack of critical evaluation of achievements in their chemistry and future prospects for their development or implementation. To provide a comprehensive historical context, the initial discussion explores into the realm of "classical" flexible OFMs, where their origin, various modes of flexibility, similarities to proteins, advanced tuning methods, and recent applications are explored. Subsequently, multivariate flexible materials, the methodologies involved in their synthesis, and horizons of their application are focussed. Furthermore, the reader to the concept of spatial distribution is introduced, providing a brief overview of the latest reports that have contributed to its elucidation. In summary, the critical review not only explores the landscape of multivariate flexible materials but also sheds light on the obstacles that the scientific community must overcome to fully unlock the potential of this fascinating field.

High-temperature carbon dioxide capture in a porous material with terminal zinc hydride sites

Carbon capture can mitigate point-source carbon dioxide (CO2) emissions, but hurdles remain that impede the widespread adoption of amine-based technologies. Capturing CO2 at temperatures closer to those of many industrial exhaust streams (>200°C) is of interest, although metal oxide absorbents that operate at these temperatures typically exhibit sluggish CO2 absorption kinetics and instability to cycling. Here, we report a porous metal-organic framework featuring terminal zinc hydride sites that reversibly bind CO2 at temperatures above 200°C-conditions that are unprecedented for intrinsically porous materials. Gas adsorption, structural, spectroscopic, and computational analyses elucidate the rapid, reversible nature of this transformation. Extended cycling and breakthrough analyses reveal that the material is capable of deep carbon capture at low CO2 concentrations and high temperatures relevant to postcombustion capture.

Integrating Compositional and Structural Diversity in Heterometallic Titanium Frameworks by Metal Exchange Methods

The increasing use of Metal-Organic Frameworks (MOFs) in separation, catalysis, or storage is linked to the targeted modification of their composition or porosity metrics. While modification of pore shape and size necessarily implies the assembly of alternative nets, compositional changes often rely on postsynthetic modification adapted to the functionalization or exchange of the organic linker or the modification of the inorganic cluster by metal exchange methods. We describe an alternative methodology that enables the integration of both types of modification, structural and compositional, in titanium MOFs by metal exchange reaction of the heterometallic cluster Ti2Ca2. A systematic analysis of this reactivity with MUV-10 is used to understand which experimental variables are crucial to enable replacement of calcium only or to integrate metal exchange with structural transformation. The isoreticular expanded framework, MUV-30, is next used to template the formation of MUV-301, a titanium framework not accessible by direct synthesis that displays the largest mesoporous cages reported to date. Given that the interest of Ti MOFs in photoredox applications often meets the limitations imposed by the challenges of titanium solution chemistry to design concrete candidates, this soft strategy based on preassembled frameworks will help integrate specific combinations of metals into high porosity architectures.

Recent Advances of Carbon Capture in Metal-Organic Frameworks: A Comprehensive Review

The excessive emission of greenhouse gases, which leads to global warming and alarms the world, has triggered a global campaign for carbon neutrality. Carbon capture and sequestration (CCS) technology has aroused wide research interest as a versatile emission mitigation technology. Metal-organic frameworks (MOFs), as a new class of high-performance adsorbents, hold great potential for CO2 capture from large point sources and ambient air due to their ultra-high specific surface area as well as pore structure. In recent years, MOFs have made great progress in the field of CO2 capture and separation, and have published a number of important results, which have greatly promoted the development of MOF materials for practical carbon capture applications. This review summarizes the most recent advanced research on MOF materials for carbon capture in various application scenarios over the past six years. The strategies for enhancing CO2 selective adsorption and separation of MOFs are described in detail, along with the development of MOF-based composites. Moreover, this review also systematically summarizes the highly concerned issues of MOF materials in practical applications of carbon capture. Finally, future research on CO2 capture by MOF materials is prospected.

Amino-Functionalized Metal-Organic Frameworks Featuring Ultra-Strong Ethane Nano-Traps for Efficient C2H6/C2H4 Separation

Developing high-performance porous materials to separate ethane from ethylene is an important but challenging task in the chemical industry, given their similar sizes and physicochemical properties. Herein, a new type of ultra-strong C2H6 nano-trap, CuIn(3-ain)4 is presented, which utilizes multiple guest-host interactions to efficiently capture C2H6 molecules and separate mixtures of C2H6 and C2H4. The ultra-strong C2H6 nano-trap exhibits the high C2H6 (2.38 mmol g-1) uptake at 6.25 kPa and 298 K and demonstrates a remarkable selectivity of 3.42 for C2H6/C2H4 (10:90). Additionally, equimolar C2H6/C2H4 exhibited a superior high separation potential ∆Q (2286 mmol L-1) at 298 K. Kinetic adsorption tests demonstrated that CuIn(3-ain)4 has a high adsorption rate for C2H6, establishing it as a new benchmark material for the capture of C2H6 and the separation of C2H6/C2H4. Notably, this exceptional performance is maintained even at a higher temperature of 333 K, a phenomenon not observed before. Theoretical simulations and single-crystal X-ray diffraction provide critical insights into how selective adsorption properties can be tuned by manipulating pore dimensions and geometry. The excellent separation performance of CuIn(3-ain)4 has been confirmed through breakthrough experiments for C2H6/C2H4 gas mixtures.

Porous liquids: an integrated platform for gas storage and catalysis

Porous liquids (PLs) represent a new frontier in materials design, combining the unique features of fluidity in liquids and permanent porosity in solids. By engineering well-defined pores into liquids via designed structure modification techniques, the greatly improved free volume significantly enhances the gas transport and storage capability of PL sorbents. Triggered by the promising applications of PLs in gas separation, PLs are further explored in catalysis particularly to integrate the gas storage and catalytic transformation procedure. This emerging field has demonstrated promising progress to advance catalytic procedures using PLs as catalysts, with performance surpassing that of the pure liquid and porous host counterparts. In this perspective article, the recent discoveries and progress in the field of integrated gas storage and catalysis by leveraging the PL platforms will be summarized, particularly compared with the traditional homogeneous or heterogeneous catalytic procedures. The unique features of PLs endow them with combined merits from liquid and solid catalysts and beyond which will be illustrated first. This will be followed by the unique techniques being utilized to probe the porosity and active sites in PLs and the structural evolution during the catalytic procedures. The catalytic application of PLs will be divided by the reaction categories, including CO2-involving transformation, O2-involving reaction, H2S conversion, hydrogenation reaction, and non-gas involving cascade reactions. In each reaction type, the synthesis approaches and structure engineering techniques of PLs, structure characterization, catalytic performance evaluation, and reaction mechanism exploration will be discussed, highlighting the structure-performance relationship and the advancement benefiting from the unique features of PLs.

Anomalous enhancement of humid CO2 capture by local surface bound water in polar carbon nanopores

Removal of confined space carbon dioxide (CO2) that is in low concentration and with coexisting water is necessary but challenging by physical adsorption method. To make the removal process effective, rendering the nanopore surface hydrophobic to resist water is the popular way. Instead of preventing water from occupying the nanopores, in this work, we propose to utilize the guest water for the spatially selective formation of local surface bound water and further induce the preferential CO2 capture. We observe an anomalous enhancement of CO2 capture performance under humid conditions over carbon nanopores with spatially selective polar sites. It is evidenced that the surface bound water is formed at non-CO2-selective areas of polar carbon nanopores, thus creating additional CO2 trapping sites. This work may inspire the design of environment tolerable materials for molecular separation and purification under harsh conditions.

Molecular Dynamics Study on the Storage of Carbon Dioxide in Single-Walled Carbon Nanotubes at Low Pressures

The storage of carbon dioxide (CO2) in single-walled carbon nanotubes was studied with molecular dynamics simulation. The influences of the temperature, system average density, and nanotube size on the CO2 pressure, density distribution, and intermolecular forces were investigated. Multilayer adsorption inside nanotubes was observed as average density increases at lower pressures, which is desirable in industry. Meanwhile, a nanobubble was gradually formed in the center of the nanotube, and the system with the nanobubble was stabilized by the balance between the positive Laplace pressure and the negative liquid pressure when the size of the nanobubble was higher than the critical size. The adsorption effect of the nanotube wall leads to high local condensed density near the wall and stronger intermolecular repulsion, while Laplace pressure results in a low local condensed density in the adsorbed CO2 near the bubble interface and stronger intermolecular attraction. The stretching effect that originates from the intermolecular force dominated by attraction in the condensed phase leads to low pressure. At the critical nanobubble size, a higher CO2 average density can be achieved by lowering the temperature and increasing the nanotube radius or length. When the adsorption impact of the nanotube wall on bubble destabilization becomes negligible as the adsorption layer thickens, further increasing the nanotube radius leads to limited increase of the average density at the critical nanobubble size. The simulation of a graphene-sealed nanotube confirmed the formation of a vapor nanobubble under more realistic conditions. This work provides insights into utilizing carbon nanotubes as a material for CO2 capture with multilayer adsorption at lower pressures.

Unveiling Temperature-Induced Structural Phase Transformations and CO2 Binding Sites in CALF-20

The increase in atmospheric carbon dioxide concentration linked to climate change has created a need for new sorbents capable of separating CO2 from exhaust gases. Recently, an easily produced metal-organic framework, CALF-20, was shown to withstand over 450,000 adsorption/desorption cycles in steam and wet acid gases. Further development and industrial application of such materials require an understanding of the observed processes. Herein, we demonstrate that conditioning as-synthesized CALF-20 single crystal transforms it into a different phase, γ-CALF-20. The transformation resulted in significant structural changes, including the binding of water molecules to Zn(II), accompanied by a reduction of 9% in the unit cell volume. Our experimental findings were supported by the energy-volume dependence of CALF-20 in the presence and absence of water molecules calculated from density functional theory. We have also monitored the sorption process of the dominant greenhouse gas, CO2, on the initial phase of CALF-20 at atomic resolution using in situ single-crystal X-ray diffraction under specific pressure. The new understanding of CALF-20 chemistry from these studies should facilitate development of novel sorbents for gas adsorption technologies.

Hierarchical porous MOF-199 mediated cellulosic paper for selective CO2 capture

MOF-199 is considered to be an excellent CO2 adsorbent owing to its substantial specific surface area, suitable pore structure and abundant sorption sites. However, powdered MOF-199 is prone to agglomeration and has poor recyclability. Herein, we proposed a MOF-199-based adsorbent by combining the MOF synthesis process with traditional papermaking process. Through such a design, MOF-199 particles are adhered on the surface of wood pulp fiber. The sufficient hydroxyl groups and electrostatic forces of cellulose facilitates the homogeneous and tight adhesion of MOF crystals. The optimal MP-4 sample demonstrated a high CO2 adsorption capacity (1.80 mmol·g--1 at 25 °C) and good CO2/N2 selectivity (30.06). Moreover, the composite sorbent can be easily regenerated. The adsorption mechanism was analyzed by the density functional theory approach. The simulation results showed that the carboxyl functional groups with a large number of oxygen atoms and active metal sites are the key to boost the CO2 adsorption performance.

The Reinforced Separation of Intractable Gas Mixtures by Using Porous Adsorbents

This review focuses on the mechanism and driving force in the intractable gas separation using porous adsorbents. A variety of intractable mixtures have been discussed, including air separation, carbon capture, and hydrocarbon purification. Moreover, the separation systems are categorized according to distinctly biased modes depending on the minor differences in the kinetic diameter, dipole/quadruple moment, and polarizability of the adsorbates, or sorted by the varied separation occasions (e.g., CO2 capture from flue gas or air) and driving forces (thermodynamic and kinetic separation, molecular sieving). Each section highlights the functionalization strategies for porous materials, like synthesis condition optimization and organic group modifications for porous carbon materials, cation exchange and heteroatom doping for zeolites, and metal node-organic ligand adjustments for MOFs. These functionalization strategies are subsequently associated with enhanced adsorption performances (capacity, selectivity, structural/thermal stability, moisture resistance, etc.) toward the analog gas mixtures. Finally, this review also discusses future challenges and prospects for using porous materials in intractable gas separation. Therein, the combination of theoretical calculation with the synthesis condition and adsorption parameters optimization of porous adsorbents may have great potential, given its fast targeting of candidate adsorbents and deeper insights into the adsorption forces in the confined pores and cages.

Ionic Pairs-Engineered Fluorinated Covalent Organic Frameworks Toward Direct Air Capture of CO2

The covalent organic frameworks (COFs) possessing high crystallinity and capability to capture low-concentration CO2 (400 ppm) from air are still underdeveloped. The challenge lies in simultaneously incorporating high-density active sites for CO2 insertion and maintaining the ordered structure. Herein, a structure engineering approach is developed to afford an ionic pair-functionalized crystalline and stable fluorinated COF (F-COF) skeleton. The ordered structure of the F-COF is well maintained after the integration of abundant basic fluorinated alcoholate anions, as revealed by synchrotron X-ray scattering experiments. The breakthrough test demonstrates its attractive performance in capturing (400 ppm) CO2 from gas mixtures via O─C bond formation, as indicated by the in situ spectroscopy and operando nuclear magnetic resonance spectroscopy using 13C-labeled CO2 sources. Both theoretical and experimental thermodynamic studies reveal the reaction enthalpy of ≈-40 kJ mol-1 between CO2 and the COF scaffolds. This implies weaker interaction strength compared with state-of-the-art amine-derived sorbents, thus allowing complete CO2 release with less energy input. The structure evolution study from synchrotron X-ray scattering and small-angle neutron scattering confirms the well-maintained crystalline patterns after CO2 insertion. The as-developed proof-of-concept approach provides guidance on anchoring binding sites for direct air capture (DAC) of CO2 in crystalline scaffolds.

Dual-Tuning Azole-Based Ionic Liquids for Reversible CO2 Capture from Ambient Air

A strategy of tuning azole-based ionic liquids for reversible CO2 capture from ambient air was reported. Through tuning the basicity of anion as well as the type of cation, an ideal azole-based ionic liquid with both high CO2 capacity and excellent stability was synthesized, which exhibited a highest single-component isotherm uptake of 2.17 mmol/g at the atmospheric CO2 concentration of 0.4 mbar at 30 °C, even in the presence of water. The bound CO2 can be released by relatively mild heating of the IL-CO2 at 80 °C, which makes it promising for energy-efficient CO2 desorption and sorbent regeneration, leading to excellent reversibility. To the best of our knowledge, these azole-based ionic liquids are superior to other adsorbent materials for direct air capture due to their dual-tunable properties and high CO2 capture efficiency, offering a new prospect for efficient and reversible direct air capture technologies.

Organomagnesia: Reversibly High Carbon Dioxide Uptake by Magnesium Pyrazolates

A series of new pyrazolate and mixed pyrazolate/pyrazole magnesium complexes is described and their reactivity toward carbon dioxide is examined. The dimeric complex [Mg(pzt Bu, t Bu)2]2 inserts CO2 instantly and quantitatively forming the tetrameric complex [Mg(CO2·pzt Bu, t Bu)2]4 and monomeric donor-stabilized [Mg(CO2·pzt Bu, t Bu)2(thf)2]. Complexes of the type [Mgx(pzR,R)2 x(HpzR,R)y]n (R = iPr, tBu) engage in similar insertion reactions involving dissociation of the carbamic acid HOOCpzR,R. Even solid polymeric derivatives [Mg(pzR,R)2]n (R = Me, H) react instantaneously and exhaustively with CO2, the resulting [Mg(CO2·pz)2]m featuring a CO2 capacity of 35.7 wt% (8.2 mmol g-1). All described magnesium pyrazolates display completely reversible CO2 uptake in solution and in the solid state, respectively, as monitored via VT 1H NMR and in situ FTIR spectroscopy as well as thermogravimetric analysis. Fluorinated [Mg2(pzCF3,CF3)4(thf)3] does not yield any isolable CO2 insertion product but exhibits the highest activity in the catalytic transformation of epoxides and CO2 to cyclic carbonates.

Translocation and Confinement of Tetraamines in Adaptable Microporous Cavities

Metal-Organic Frameworks can be grafted with amines by coordination to metal vacancies to create amine-appended solid adsorbents, which are being considered as an alternative to using aqueous amine solutions for CO2 capture. In this study, we propose an alternative mechanism that does not rely on the use of neutral metal vacancies as binding sites but is enabled by the structural adaptability of heterobimetallic Ti2Ca2 clusters. The combination of hard (Ti4+) and soft (Ca2+) metal centers in the inorganic nodes of the framework enables MUV-10 to adapt its pore windows to the presence of triethylenetetramine molecules. This dynamic cluster response facilitates the translocation and binding of tetraamine inside the microporous cavities to enable the formation of bis-coordinate adducts that are stable in water. The extension of this grafting concept from MUV-10 to larger cavities not restrictive to CO2 diffusion will complement other strategies available for the design of molecular sorbents for decarbonization applications.

Reverse Separation of Carbon Dioxide and Acetylene in Two Isostructural Copper Pyridine-Carboxylate Frameworks

Separating acetylene from carbon dioxide is important but highly challenging due to their similar molecular shapes and physical properties. Adsorptive separation of carbon dioxide from acetylene can directly produce pure acetylene but is hardly realized because of relatively polarizable acetylene binds more strongly. Here, we reverse the CO2 and C2H2 separation by adjusting the pore structures in two isoreticular ultramicroporous metal-organic frameworks (MOFs). Under ambient conditions, copper isonicotinate (Cu(ina)2), with relatively large pore channels shows C2H2-selective adsorption with a C2H2/CO2 selectivity of 3.4, whereas its smaller-pore analogue, copper quinoline-5-carboxylate (Cu(Qc)2) shows an inverse CO2/C2H2 selectivity of 5.6. Cu(Qc)2 shows compact pore space that well matches the optimal orientation of CO2 but is not compatible for C2H2. Neutron powder diffraction experiments confirmed that CO2 molecules adopt preferential orientation along the pore channels during adsorption binding, whereas C2H2 molecules bind in an opposite fashion with distorted configurations due to their opposite quadrupole moments. Dynamic breakthrough experiments have validated the separation performance of Cu(Qc)2 for CO2/C2H2 separation.

Electrochemical Anion Sensing Using Conductive Metal-Organic Framework Nanocrystals with Confined Pores

Anion sensing technology is motivated by the widespread and critical roles played by anions in biological systems and the environment. Electrochemical approaches comprise a major portion of this field but so far have relied on redox-active molecules appended to electrodes that often lack the ability to produce mixtures of distinct signatures from mixtures of different anions. Here, nanocrystalline films of the conductive metal-organic framework (MOF) Cr(1,2,3-triazolate)2 are used to differentiate anions based on size, which consequently affect the reversible oxidation of the MOF. During framework oxidation, the intercalation of larger charge-balancing anions (e.g., ClO4-, PF6-, and OTf-) gives rise to redox potentials shifted anodically by hundreds of mV due to the additional work of solvent reorganization and anion desolvation. Smaller anions (e.g., BF4-) may enter partially solvated, while larger ansions (e.g., OTf-) intercalate with complete desolvation. As a proof-of-concept, we leverage this "nanoconfinement" approach to report an electrochemical ClO4- sensor in aqueous media that is recyclable, reusable, and sensitive to sub-100-nM concentrations. Taken together, these results exemplify an unusual combination of distinct external versus internal surface chemistry in MOF nanocrystals and the interfacial chemistry they enable as a novel supramolecular approach for redox voltammetric anion sensing.

The influence of HKUST-1 and MOF-76 hand grinding/mechanical activation on stability, particle size, textural properties and carbon dioxide sorption

In this study, we explore the mechanical treatment of two metal-organic frameworks (MOFs), HKUST-1 and MOF-76, applying various milling methods to assess their impact on stability, porosity, and CO2 adsorption capacity. The effects of different mechanical grinding techniques, such as high-energy ball milling and hand grinding, on these MOFs were compared. The impact of milling time, milling speed and ball size during high-energy ball milling was assessed via the Design of Experiments methodology, namely using a 33 Taguchi orthogonal array. The results highlight a marked improvement in CO2 adsorption capacity for HKUST-1 through hand milling, increasing from an initial 25.70 wt.% (5.84 mmol g-1) to 41.37 wt.% (9.40 mmol g-1), marking a significant 38% increase. In contrast, high-energy ball milling seems to worsen this property, diminishing the CO2 adsorption abilities of the materials. Notably, MOF-76 shows resistance to hand grinding, closely resembling the original sample's performance. Hand grinding also proved to be well reproducible. These findings clarify the complex effects of mechanical milling on MOF materials, emphasising the necessity of choosing the proper processing techniques to enhance their stability, texture, and performance in CO2 capture and storage applications.

Deciphering Mechanisms of CO2-Selective Recognition over Acetylene within Porous Materials

Reverse adsorption of carbon dioxide (CO2) from acetylene (C2H2) presents both significant importance and formidable challenges, particularly in the context of carbon capture, energy efficiency, and environmental sustainability. In this Review, we delve into the burgeoning field of reverse CO2/C2H2 adsorption and separation, underscoring the absence of a cohesive materials design strategy and a comprehensive understanding of the CO2-selective capture mechanisms from C2H2, in contrast to the quite mature methodologies available for C2H2-selective adsorption. Focusing on porous materials, the latest advancements in CO2-selective recognition mechanisms are highlighted. The review establishes that the efficacy of CO2 recognition from C2H2 relies intricately on a myriad of factors, including pore architecture, framework flexibility, functional group interactions, and dynamic responsive behaviors under operating conditions. It is noted that achieving selectivity extends beyond physical sieving, necessitating meticulous adjustments in pore chemistry to exploit the subtle differences between CO2 and C2H2. This comprehensive overview seeks to enhance the understanding of CO2-selective recognition mechanisms, integrating essential insights crucial for the advancement of future materials. It also lays the groundwork for innovative porous materials in CO2/C2H2 separation, addressing the pressing demand for more efficient molecular recognition within gas separation technologies.

Measuring Mass Transfer of n-Hexane and 2-Chloroethyl Ethyl Sulfide in Sorbent/Polymer Fiber Composites Using a Volumetric Adsorption Apparatus

The integration of metal-organic frameworks (MOFs) into composite systems serves as an effective strategy to increase the processability of these materials. Notably, MOF/fiber composites have shown much promise as protective equipment for the capture and remediation of chemical warfare agents. However, the practical application of these composites requires an understanding of their mass transport properties, as both mass transfer resistance at the surface and diffusion within the materials can impact the efficacy of these materials. In this work, we synthesized composite fibers of MOF-808 and amidoxime-functionalized polymers of intrinsic microporosity (PIM-1-AX) and measured the adsorption and mass transport behavior of n-hexane and 2-chloroethyl ethyl sulfide (CEES), a sulfur mustard simulant. We developed a new Fickian diffusion model for cylindrical shapes to fit the dynamic adsorption data obtained from a commercial volumetric adsorption apparatus and found that mass transport behavior in composite fibers closely resembled that in the pure PIM fibers, regardless of MOF loading. Moreover, we found that n-hexane adsorption mirrors that of CEES, indicating that it could be used as a structural mimic for future adsorption studies of the sulfur mustard simulant. These preliminary insights and the new model introduced in this work lay the groundwork for the design of next-generation composite materials for practical applications.

A Scalable Robust Microporous Al-MOF for Post-Combustion Carbon Capture

Herein, a robust microporous aluminum tetracarboxylate framework, MIL-120(Al)-AP, (MIL, AP: Institute Lavoisier and Ambient Pressure synthesis, respectively) is reported, which exhibits high CO2 uptake (1.9 mmol g-1 at 0.1 bar, 298 K). In situ Synchrotron X-ray diffraction measurements together with Monte Carlo simulations reveal that this structure offers a favorable CO2 capture configuration with the pores being decorated with a high density of µ2-OH groups and accessible aromatic rings. Meanwhile, based on calculations and experimental evidence, moderate host-guest interactions Qst (CO2) value of MIL-120(Al)-AP (-40 kJ mol-1) is deduced, suggesting a relatively low energy penalty for full regeneration. Moreover, an environmentally friendly ambient pressure green route, relying on inexpensive raw materials, is developed to prepare MIL-120(Al)-AP at the kilogram scale with a high yield while the Metal- Organic Framework (MOF) is further shaped with inorganic binders as millimeter-sized mechanically stable beads. First evidences of its efficient CO2/N2 separation ability are validated by breakthrough experiments while operando IR experiments indicate a kinetically favorable CO2 adsorption over water. Finally, a techno-economic analysis gives an estimated production cost of ≈ 13 $ kg-1, significantly lower than for other benchmark MOFs. These advancements make MIL-120(Al)-AP an excellent candidate as an adsorbent for industrial-scale CO2 capture processes.

Gas adsorption and framework flexibility of CALF-20 explored via experiments and simulations

In 2021, Svante, in collaboration with BASF, reported successful scale up of CALF-20 production, a stable MOF with high capacity for post-combustion CO2 capture which exhibits remarkable stability towards water. CALF-20's success story in the MOF commercialisation space provides new thinking about appropriate structural and adsorptive metrics important for CO2 capture. Here, we combine atomistic-level simulations with experiments to study adsorptive properties of CALF-20 and shed light on its flexible crystal structure. We compare measured and predicted CO2 and water adsorption isotherms and explain the role of water-framework interactions and hydrogen bonding networks in CALF-20's hydrophobic behaviour. Furthermore, regular and enhanced sampling molecular dynamics simulations are performed with both density-functional theory (DFT) and machine learning potentials (MLPs) trained to DFT energies and forces. From these simulations, the effects of adsorption-induced flexibility in CALF-20 are uncovered. We envisage this work would encourage development of other MOF materials useful for CO2 capture applications in humid conditions.

Understanding the effect of density functional choice and van der Waals treatment on predicting the binding configuration, loading, and stability of amine-grafted metal organic frameworks

Metal organic frameworks (MOFs) are crystalline, three-dimensional structures with high surface areas and tunable porosities. Made from metal nodes connected by organic linkers, the exact properties of a given MOF are determined by node and linker choice. MOFs hold promise for numerous applications, including gas capture and storage. M2(4,4'-dioxidobiphenyl-3,3'-dicarboxylate)-henceforth simply M2(dobpdc), with M = Mg, Mn, Fe, Co, Ni, Cu, or Zn-is regarded as one of the most promising structures for CO2 capture applications. Further modification of the MOF with diamines or tetramines can significantly boost gas species selectivity, a necessity for the ultra-dilute CO2 concentrations in the direct-air capture of CO2. There are countless potential diamines and tetramines, paving the way for a vast number of potential sorbents to be probed for CO2 adsorption properties. The number of amines and their configuration in the MOF pore are key drivers of CO2 adsorption capacity and kinetics, and so a validation of computational prediction of these quantities is required to suitably use computational methods in the discovery and screening of amine-functionalized sorbents. In this work, we study the predictive accuracy of density functional theory and related calculations on amine loading and configuration for one diamine and two tetramines. In particular, we explore the Perdew-Burke-Ernzerhof (PBE) functional and its formulation for solids (PBEsol) with and without the Grimme-D2 and Grimme-D3 pairwise corrections (PBE+D2/3 and PBEsol+D2/3), two revised PBE functionals with the Grimme-D2 and Grimme-D3 pairwise corrections (RPBE+D2/3 and revPBE+D2/3), and the nonlocal van der Waals correlation (vdW-DF2) functional. We also investigate a universal graph deep learning interatomic potential's (M3GNet) predictive accuracy for loading and configuration. These results allow us to identify a useful screening procedure for configuration prediction that has a coarse component for quick evaluation and a higher accuracy component for detailed analysis. Our general observation is that the neural network-based potential can be used as a high-level and rapid screening tool, whereas PBEsol+D3 gives a completely qualitatively predictive picture across all systems studied, and can thus be used for high accuracy motif predictions. We close by briefly exploring the predictions of relative thermal stability for the different functionals and dispersion corrections.

Ultrahigh Bifunctional Photocatalytic CO2 Reduction and H2 Evolution by Synergistic Interaction of Heteroatomic Pt-Ru Dimerization Sites

Diatomic-site catalysts (DASCs) inherit the excellent performance of single-atom catalysts (SACs) by utilizing two adjacent atomic metal species to achieve functional complementarity and synergistic effects that improve the carbon dioxide reduction reaction (CO2RR) and H2 evolution reaction (HER) kinetics. Herein, we report a method to further improve the catalytic efficiency of Pt by using Pt and Ru single atoms randomly anchored on a g-C3N4 surface, yielding partial Pt-Ru dimers. The synthesized catalyst exhibits extraordinary photocatalytic activity and stability in both the CO2RR and HER processes. In-depth experimentation, the pH-dependent chemical exchange saturation transfer (CEST) imaging nuclear magnetic resonance (NMR) method, and theoretical analyses reveal that the excellent performance is attributed to orbital coupling between the Pt atoms and the neighboring Ru atoms (mainly dxy and dxz), which decreases the orbital energy levels and weakens the bond strength with intermediates, resulting in improved CO2RR and HER performance. This study successfully applies the pH-dependent CEST imaging NMR method to catalytic reactions, and CO2 adsorption is directly observed using CEST 2D imaging maps. This work presents significant potential for a variety of catalytic reaction applications by systematically designing bimetallic dimers with higher activity and stability.

Electricity generation from carbon dioxide adsorption by spatially nanoconfined ion separation

Selective ion transport underpins fundamental biological processes for efficient energy conversion and signal propagation. Mimicking these 'ionics' in synthetic nanofluidic channels has been increasingly promising for realizing self-sustained systems by harvesting clean energy from diverse environments, such as light, moisture, salinity gradient, etc. Here, we report a spatially nanoconfined ion separation strategy that enables harvesting electricity from CO2 adsorption. This breakthrough relies on the development of Nanosheet-Agarose Hydrogel (NAH) composite-based generators, wherein the oppositely charged ions are released in water-filled hydrogel channels upon adsorbing CO2. By tuning the ion size and ion-channel interactions, the released cations at the hundred-nanometer scale are spatially confined within the hydrogel network, while ångström-scale anions pass through unhindered. This leads to near-perfect anion/cation separation across the generator with a selectivity (D-/D+) of up to 1.8 × 106, allowing conversion into external electricity. With amplification by connecting multiple as-designed generators, the ion separation-induced electricity reaching 5 V is used to power electronic devices. This study introduces an effective spatial nanoconfinement strategy for widely demanded high-precision ion separation, encouraging a carbon-negative technique with simultaneous CO2 adsorption and energy generation.

High-Capacity, Cooperative CO2 Capture in a Diamine-Appended Metal-Organic Framework through a Combined Chemisorptive and Physisorptive Mechanism

Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) metal-organic frameworks are promising candidates for carbon capture that exhibit exceptional selectivities and high capacities for CO2. To date, CO2 uptake in these materials has been shown to occur predominantly via a chemisorption mechanism involving CO2 insertion at the amine-appended metal sites, a mechanism that limits the capacity of the material to ∼1 equiv of CO2 per diamine. Herein, we report a new framework, pip2-Mg2(dobpdc) (pip2 = 1-(2-aminoethyl)piperidine), that exhibits two-step CO2 uptake and achieves an unusually high CO2 capacity approaching 1.5 CO2 per diamine at saturation. Analysis of variable-pressure CO2 uptake in the material using solid-state nuclear magnetic resonance (NMR) spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) reveals that pip2-Mg2(dobpdc) captures CO2 via an unprecedented mechanism involving the initial insertion of CO2 to form ammonium carbamate chains at half of the sites in the material, followed by tandem cooperative chemisorption and physisorption. Powder X-ray diffraction analysis, supported by van der Waals-corrected density functional theory, reveals that physisorbed CO2 occupies a pocket formed by adjacent ammonium carbamate chains and the linker. Based on breakthrough and extended cycling experiments, pip2-Mg2(dobpdc) exhibits exceptional performance for CO2 capture under conditions relevant to the separation of CO2 from landfill gas. More broadly, these results highlight new opportunities for the fundamental design of diamine-Mg2(dobpdc) materials with even higher capacities than those predicted based on CO2 chemisorption alone.

Carbon nanotubes with CoNi alloy nanoparticles growing on porous carbon substrate as cathode for Li-CO2 batteries

The over-exploitation of fossil fuels and rapid industrialization has released a large number of carbon dioxide. As a major greenhouse gas, it can induce the increasing global temperature and result in environmental issues. It is an urgent necessity to reduce carbon dioxide emission and increase carbon capture, utilization and storage. Li-CO2 battery can be used for the fixation and conversion of carbon dioxide to electrochemical energy. However, it is necessary to explore and design efficient catalysts, due to the low electronic conductivity and sluggish decomposition kinetics for lithium carbonate as the discharge product. Herein, carbon nanotubes with CoNi alloy nanoparticles growing on porous carbon substrate (PC/CoNi-CNTs) is designed by immersing porous melamine formaldehyde sponge into cobalt nitrate and nickel chloride solution with the subsequent carbonization. The porous structure of carbon substrate facilitates the electrolyte infiltration and carbon dioxide diffusion. The carbon nanotubes and CoNi alloy catalysts can efficiently enhance the reversible deposition and decomposition of lithium carbonate and carbon, taking advantage of their synergistic effect. At a current density of 0.05 mA cm-2, the terminal discharge and charge voltages are 2.76 and 4.23 V with a limited specific capacity of 0.2 mA h cm-2, respectively. These results demonstrat that the design of carbon nanotubes with alloy nanoparticles on porous carbon substrate as cathode can enhance the electrochemical performances of Li-CO2 battery.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Boc Protection for Diamine-Appended MOF Adsorbents to Enhance CO2 Recyclability under Realistic Humid Conditions

Among the various metal-organic framework (MOF) adsorbents, diamine-functionalized Mg2(dobpdc) (dobpdc4- = 4,4-dioxidobiphenyl-3,3'-dicarboxylate) shows remarkable carbon dioxide removal performance. However, applying diamine-functionalized Mg2(dobpdc) in practical applications is premature because it shows persistent performance degradation under real flue gas conditions containing water vapor owing to diamine loss during wet cycles. To address this issue, we employed hydrophobic carbonate compounds to protect diamine groups in een-Mg2(dobpdc) (een-MOF, een = N-ethylethylenediamine). tert-Butyl dicarbonate (Boc) reacted rapidly with diamines at the pore openings of MOF particles to form dense secondary and tertiary hydrophobic amines, effectively preventing moisture ingress. The Boc-protected een-MOF-Boc1 maintained excellent CO2 adsorption even under simulated flue gas conditions containing 10% H2O. This observation indicates that Boc protection renders een groups intact during repeated wet cycles, suggesting that Boc-protected een groups are resistant to replacement by water molecules. To increase the practicability of the MOF adsorbent, we fabricated een-MOF/PAN-Boc1 composite beads by shaping MOF particles with polyacrylonitrile (PAN). Notably, the composite beads maintained their CO2 adsorption performance even after repeating the temperature swing adsorption process more than 150 times in 10% water vapor. Furthermore, breakthrough tests showed that the dynamic CO2 separation performance was retained under humid conditions. These results demonstrate that Boc protection provides an easy and effective way to develop promising adsorbents with high CO2 adsorption capacity, long-term durability, and the properties required for postcombustion applications.

A novel approach to environmental pollution management/remediation techniques using derived advanced materials

The carbon dioxide (CO2) crisis is one of the world's most urgent issues. Meeting the worldwide targets set for CO2 capture and storage (CCS) is crucial. Because it may significantly reduce energy consumption compared to traditional amine-based adsorption capture, adsorption dependant CO2 capture is regarded as one of the most hopeful techniques in this paradigm. The expansion of unique, critical edge adsorbent materials has received most of the research attention to date, with the main objective of improving adsorption capacity and lifespan while lowering the temperature of adsorption, thereby lowering the energy demand of sorbent revival. There are specific materials needed for each step of the carbon cycle, including capture, regeneration, and conversion. The potential and efficiency of metal-organic frameworks (MOFs) in overcoming this obstacle have recently been proven through research. In this study, we pinpoint MOFs' precise structural and chemical characteristics that have contributed to their high capture capacity, effective regeneration and separation processes, and efficient catalytic conversions. As prospective materials for the next generation of energy storage and conversion applications, carbon-based compounds like graphene, carbon nanotubes, and fullerenes are receiving a lot of interest. Their distinctive physicochemical characteristics make them suitable for these popular study topics, including structural stability and flexibility, high porosity, and customizable physicochemical traits. It is possible to precisely design the interior of MOFs to include coordinatively unsaturated metal sites, certain heteroatoms, covalent functionalization, various building unit interactions, and integrated nanoscale metal catalysts. This is essential for the creation of MOFs with improved performance. Utilizing the accuracy of MOF chemistry, more complicated materials must be built to handle selectivity, capacity, and conversion all at once to achieve a comprehensive solution. This review summarizes, the most recent developments in adsorption-based CO2 combustion capture, the CO2 adsorption capacities of various classes of solid sorbents, and the significance of advanced carbon nanomaterials for environmental remediation and energy conversion. This review also addresses the difficulties and potential of developing carbon-based electrodes for energy conversion and storage applications.

A Solution-Processable Porphyrin-Based Hydrogen-Bonded Organic Framework for Photoelectrochemical Sensing of Carbon Dioxide

Detecting CO2 in complex gas mixtures is challenging due to the presence of competitive gases in the ambient atmosphere. Photoelectrochemical (PEC) techniques offer a solution, but material selection and specificity remain limiting. Here, we constructed a hydrogen-bonded organic framework material based on a porphyrin tecton decorated with diaminotriazine (DAT) moieties. The DAT moieties on the porphyrin molecules not only facilitate the formation of complementary hydrogen bonds between the tectons but also function as recognition sites in the resulting porous HOF materials for the selective adsorption of CO2 . In addition, the in-plane growth of FDU-HOF-2 into anisotropic molecular sheets with large areas of up to 23000 μm2 and controllable thickness between 0.298 and 2.407 μm were realized in yields of over 89 % by a simple solution-processing method. The FDU-HOF-2 can be directly grown and deposited onto different substrates including silica, carbon, and metal oxides by self-assembly in situ in formic acid. As a proof of concept, a screen-printing electrode deposited with FDU-HOF-2 was fabricate as a label-free photoelectrochemical (PEC) sensor for CO2 detection. Such a signal-off PEC sensor exhibits low detection limit for CO2 (2.3 ppm), reusability (at least 30 cycles), and long-term working stability (at least 30 days).

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2

Direct air capture (DAC) of CO2 has emerged as the most promising "negative carbon emission" technologies. Despite being state-of-the-art, sorbents deploying alkali hydroxides/amine solutions or amine-modified materials still suffer from unsolved high energy consumption and stability issues. In this work, composite sorbents are crafted by hybridizing a robust metal-organic framework (Ni-MOF) with superbase-derived ionic liquid (SIL), possessing well maintained crystallinity and chemical structures. The low-pressure (0.4 mbar) volumetric CO2 capture assessment and a fixed-bed breakthrough examination with 400 ppm CO2 gas flow reveal high-performance DAC of CO2 (CO2 uptake capacity of up to 0.58 mmol g-1 at 298 K) and exceptional cycling stability. Operando spectroscopy analysis reveals the rapid (400 ppm) CO2 capture kinetics and energy-efficient/fast CO2 releasing behaviors. The theoretical calculation and small-angle X-ray scattering demonstrate that the confinement effect of the MOF cavity enhances the interaction strength of reactive sites in SIL with CO2 , indicating great efficacy of the hybridization. The achievements in this study showcase the exceptional capabilities of SIL-derived sorbents in carbon capture from ambient air in terms of rapid carbon capture kinetics, facile CO2 releasing, and good cycling performance.

Cu2+@metal-organic framework-derived amphiphilic sandwich catalysts for enhanced hydrogenation selectivity of ketenes at the oil-water interface

Selective catalysis has always been an essential process for manufacturing various fine chemicals, such as food additives, pharmaceuticals and perfumes. Practically, pure target products are difficult to obtain even after complex purification procedures during industrial production. The development of a cost-effective, highly chemoselective and long-life catalyst may be an attractive solution, but such a catalyst is elusive. Herein, a novel class of amphiphilic N-doped carbon (NC), featuring graphitic carbon (GC) and highly dispersed Cu@Co NPs, was fabricated via simple calcination of a Cu2+-doped bimetallic metal-organic framework (MOF) precusor directly. Compared with monometallic Co@GC/NC, the side reaction of CO bond hydrogenation is obviously restrained, and thus, pure target product can be systematically obtained by Cu@Co@GC/NC, highlighting the high selectivity of Cu. More importantly, an amphiphilic characteristic in Cu@Co@GC/NC is a significant knob to integrate organic substrates with water very well. This amphiphilic material shows great potential as a field-deployable pathway for dispersible metal catalysts in organic systems.

Suitability of a diamine functionalized metal-organic framework for direct air capture

The increase in the atmospheric carbon dioxide level is a significant threat to our planet, and therefore the selective removal of CO2 from the air is a global concern. Metal-organic frameworks (MOFs) are a class of porous materials that have shown exciting potential as adsorbents for CO2 capture due to their high surface area and tunable properties. Among several implemented technologies, direct air capture (DAC) using MOFs is a promising strategy for achieving climate targets as it has the potential to actively reduce the atmospheric CO2 concentration to a safer levels. In this study, we investigate the stability and regeneration conditions of N,N'-dimethylethylenediamine (mmen) appended Mg2(dobpdc), a MOF with exceptional CO2 adsorption capacity from atmospheric air. We employed a series of systematic experiments including thermogravimetric analysis (TGA) coupled with Fourier transformed infrared (FTIR) and gas chromatography mass spectrometer (GCMS) (known as TGA-FTIR-GCMS), regeneration cycles at different conditions, control and accelerated aging experiments. We also quantified CO2 and H2O adsorption under humid CO2 using a combination of data from TGA-GCMS and coulometric Karl-Fischer titration techniques. The quantification of CO2 and H2O adsorption under humid conditions provides vital information for the design of real-world DAC systems. Our results demonstrate the stability and regeneration conditions of mmen appended Mg2(dobpdc). It is stable up to 50% relative humidity when the adsorption temperature varies from 25-40 °C and the best regeneration condition can be achieved at 120 °C under dynamic vacuum and at 150 °C under N2.

Induced Production of Atypical Naturally Nonpreferred Metal-Organic Frameworks and Their Detachment via Provoking Post-Mismatching

The structures of metal-organic frameworks (MOFs) are typically determined by the building blocks that compose them and the conditions under which they are formed. MOFs tend to adopt a thermodynamically and/or kinetically stable structure (naturally preferred form). Thus, constructing MOFs with naturally nonpreferred structures is a challenging task, as it requires avoiding the easier pathway toward a naturally preferred MOF. Herein, an approach to construct naturally nonpreferred dicarboxylate-linked MOFs employing reaction templates is reported. This strategy relies on the registry between the surface of the template and the cell lattice of a target MOF, which reduces the effort required to form naturally nonpreferred MOFs. Reactions of p-block trivalent metal ions (Ga3+ and In3+ ) with dicarboxylic acids typically produce preferred MIL-53 or MIL-68. However, the surface of UiO-67 (and UiO-66) template exhibits the well-defined hexagonal lattice, which induce the selective formation of a naturally nonpreferred MIL-88 structure. Inductively grown MIL-88s are purely isolated from the template via provoking a post-mismatch in their lattices and weakening the interfacial interaction between product and template. It is also discovered that an appropriate template for effective induced production of naturally nonpreferred MOFs shall be properly selected based on the cell lattice of a target MOF.

Exquisitely Constructing a Robust MOF with Dual Pore Sizes for Efficient CO2 Capture

Developing metal-organic framework (MOF) adsorbents with excellent performance and robust stability is of critical importance to reduce CO2 emissions yet challenging. Herein, a robust ultra-microporous MOF, Cu(bpfb)(bdc), with mixed ligands of N, N'-(1,4-phenylene)diisonicotinamide (bpfb), and 1,4-dicarboxybenzene (bdc) was delicately constructed. Structurally, this material possesses double-interpenetrated frameworks formed by two staggered, independent frameworks, resulting in two types of narrow ultra-micropores of 3.4 × 5.0 and 4.2 × 12.8 Å2, respectively. The above structural properties make its highly selective separation at 273~298 K with a CO2 capacity of 71.0~86.2 mg/g. Its adsorption heat over CO2 and IAST selectivity were calculated to be 27 kJ/mol and 52.2, respectively. Remarkably, cyclic breakthrough experiments corroborate its impressive performance in CO2/N2 separation in not only dry but also 75% RH humid conditions. Molecular simulation reveals that C-H···OCO2 in the pores plays a pivotal role in the high selectivity of CO2 adsorption. These results point out the huge potential application of this material for CO2/N2 separation.

Cooperative Carbon Dioxide Capture in Diamine-Appended Magnesium-Olsalazine Frameworks

Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) metal-organic frameworks have emerged as promising candidates for carbon capture owing to their exceptional CO2 selectivities, high separation capacities, and step-shaped adsorption profiles, which arise from a unique cooperative adsorption mechanism resulting in the formation of ammonium carbamate chains. Materials appended with primary,secondary-diamines featuring bulky substituents, in particular, exhibit excellent stabilities and CO2 adsorption properties. However, these frameworks display double-step adsorption behavior arising from steric repulsion between ammonium carbamates, which ultimately results in increased regeneration energies. Herein, we report frameworks of the type diamine-Mg2(olz) (olz4- = (E)-5,5'-(diazene-1,2-diyl)bis(2-oxidobenzoate)) that feature diverse diamines with bulky substituents and display desirable single-step CO2 adsorption across a wide range of pressures and temperatures. Analysis of CO2 adsorption data reveals that the basicity of the pore-dwelling amine─in addition to its steric bulk─is an important factor influencing adsorption step pressure; furthermore, the amine steric bulk is found to be inversely correlated with the degree of cooperativity in CO2 uptake. One material, ee-2-Mg2(olz) (ee-2 = N,N-diethylethylenediamine), adsorbs >90% of the CO2 from a simulated coal flue stream and exhibits exceptional thermal and oxidative stability over the course of extensive adsorption/desorption cycling, placing it among top-performing adsorbents to date for CO2 capture from a coal flue gas. Spectroscopic characterization and van der Waals-corrected density functional theory calculations indicate that diamine-Mg2(olz) materials capture CO2 via the formation of ammonium carbamate chains. These results point more broadly to the opportunity for fundamentally advancing materials in this class through judicious design.

Soft corrugated channel with synergistic exclusive discrimination gating for CO2 recognition in gas mixture

Developing artificial porous systems with high molecular recognition performance is critical but very challenging to achieve selective uptake of a particular component from a mixture of many similar species, regardless of the size and affinity of these competing species. A porous platform that integrates multiple recognition mechanisms working cooperatively for highly efficient guest identification is desired. Here, we designed a flexible porous coordination polymer (PCP) and realised a corrugated channel system that cooperatively responds to only target gas molecules by taking advantage of its stereochemical shape, location of binding sites, and structural softness. The binding sites and structural deformation act synergistically, exhibiting exclusive discrimination gating (EDG) effect for selective gate-opening adsorption of CO₂ over nine similar gas molecules, including N₂, CH₄, CO, O₂, H₂, Ar, C₂H₆, and even higher-affinity gases such as C₂H₂ and C₂H₄. Combining in-situ crystallographic experiments with theoretical studies, it is clear that this unparalleled ability to decipher the CO₂ molecule is achieved through the coordination of framework dynamics, guest diffusion, and interaction energetics. Furthermore, the gas co-adsorption and breakthrough separation performance render the obtained PCP an efficient adsorbent for CO₂ capture from various gas mixtures.

Exclusive Recognition of CO2 from Hydrocarbons by Aluminum Formate with Hydrogen-Confined Pore Cavities

Exclusive capture of carbon dioxide (CO₂) from hydrocarbons via adsorptive separation is an important technology in the petrochemical industry, especially for acetylene (C₂H₂) production. However, the physicochemical similarities between CO₂ and C₂H₂ hamper the development of CO₂-preferential sorbents, and CO₂ is mainly discerned via C recognition with low efficiency. Here, we report that the ultramicroporous material Al(HCOO)₃, ALF, can exclusively capture CO₂ from hydrocarbon mixtures, including those containing C₂H₂ and CH₄. ALF shows a remarkable CO₂ capacity of 86.2 cm³ g^-1 and record-high CO₂/C₂H₂ and CO₂/CH₄ uptake ratios. The inverse CO₂/C₂H₂ separation and exclusive CO₂ capture performance from hydrocarbons are validated via adsorption isotherms and dynamic breakthrough experiments. Notably, the hydrogen-confined pore cavities with appropriate dimensional size provide an ideal pore chemistry to specifically match CO₂ via a hydrogen bonding mechanism, with all hydrocarbons rejected. This molecular recognition mechanism is unveiled by in situ Fourier-transform infrared spectroscopy, X-ray diffraction studies, and molecular simulations.