Increased temperature enhances the antimicrobial effects of daptomycin, vancomycin, tigecycline, fosfomycin, and cefamandole on staphylococcal biofilms

Bacterial clustering biomaterials as anti-infective therapies

In Nature, bacterial clustering by host-released peptides or nucleic acids is an evolutionarily conserved immune defense strategy employed to prevent adhesion of pathogenic microbes, which is prerequisite for most infections. Synthetic anti-adhesion strategies present as non-lethal means of targeting bacteria and may potentially be used to avoid resistance against antimicrobial therapies. From bacteria-agglutinating biomolecules discovered in nature to synthetic designs involving peptides, cationic polymers and nanoparticles, the modes of actions appear broad and unconsolidated. Herein, we present a critical review and update of the state-of-the-art in synthetic bacteria-clustering designs with proposition of a more streamlined nomenclature and classification. Overall, this review aims to consolidate the conceptual framework in the field of bacterial clustering and highlight its potentials as an avenue for discovering novel antibacterial biomaterials.

Gene knockout studies of Dps protein reveals a novel role for DNA-binding protein in maintaining outer membrane permeability

DNA-binding proteins like Dps are crucial for bacterial stress physiology. This study investigated the unexpected role of Dps protein in maintaining outer membrane integrity of Salmonella Typhimurium. We observed that a Δdps mutant displayed increased sensitivity to glycopeptide antibiotics (vancomycin, nisin), which are ineffective against Gram-negative bacteria due to their thick outer membrane (OM). Furthermore, the Δdps mutant exhibited susceptibility to membrane-disrupting agents like detergents (deoxycholate, SDS) and phages. The perforation was observed in OM after the treatment of vancomycin using atomic force microscopy. Notably, this sensitivity was rescued by supplementing the media with calcium and magnesium cations. These findings suggest a novel function for Dps in maintaining outer membrane permeability. We propose two potential mechanisms: 1) Dps might directly localize to the outer membrane 2) Dps might regulate genes responsible for lipopolysaccharide synthesis or outer membrane proteins, key components of outer membrane. This study highlights a previously unknown role for Dps beyond DNA binding and warrants further investigation into the precise mechanism by which it influences outer membrane integrity in Salmonella.

Preservatives for postmortem brain tissue in biomechanical testing: A pilot study

Postmortem human subject (PMHS) studies are essential to brain injury research in motor vehicle safety. However, postmortem deterioration reduces the similarity between postmortem test results and in vivo response in material testing of brain tissue and in biomechanical testing of the whole head. This pilot study explores the effect of potential preservatives on brain tissue breakdown to identify promising preservatives that warrant further investigation. To identify preservatives with potential to slow postmortem degradation, samples from an initial PMHS were refrigerated at 10°C to qualitatively compare tissue breakdown from 58 to 152 h postmortem after storage in candidate solutions. On brain tissue samples from a second PMHS, compressive stiffness was measured on six samples immediately after harvest for comparison to the stiffness of 23 samples that were stored at 10°C in candidate solutions for 24 h after harvest. The candidate solutions were artificial cerebrospinal fluid (ACSF) without preservatives; ACSF with a combination of antibiotics and antifungal agents; ACSF with added sodium bicarbonate; and ACSF with both the antibiotic/antifungal combination and sodium bicarbonate. Results were analyzed using multiple linear regression of specimen stiffness on harvest lobe and storage solution to investigate potential differences in tissue stiffness. Qualitative evaluation suggested that samples stored in a solution that contained both the antibiotic/antifungal combination and sodium bicarbonate exhibited less evidence of tissue breakdown than the samples stored without preservatives or with only one of those preservatives. In compression testing, samples tested immediately after harvest were significantly stiffer than samples tested after 24 h of storage at 10°C in ACSF (difference: -0.27 N/mm, 95% confidence interval (CI): -0.50, -0.05) or ACSF with antibiotics/antifungal agents (difference: -0.32 N/mm, 95% CI: -0.59, -0.04), controlling for harvest lobe. In contrast, the stiffness of samples tested after storage in either solution containing sodium bicarbonate was not significantly different from the stiffness of samples tested at harvest. There was no significant overall difference in the mean tissue stiffness between samples from the frontal and parietal lobes, controlling for storage solution. Given the importance of PMHS studies to brain injury research, any strategy that shows promise for helping to maintain in vivo brain material properties has the potential to improve understanding of brain injury mechanisms and tolerance to head injury and warrants further investigation. These pilot study results suggest that sodium bicarbonate has the potential to reduce the deterioration of brain tissue in biomechanical testing. The results motivate further evaluation of sodium bicarbonate as a preservative for biomechanical testing using additional test subjects, more comprehensive material testing, and evaluation under a broader set of test conditions including in whole-head testing. The effect of antibiotics and antifungal agents on brain tissue stiffness was minimal but may have been limited by the cold storage conditions in this study. Further exploration of the potential for microbial agents to preserve tissue postmortem would benefit from evaluation of the effects of storage temperature.

Antibiotic Augmentation of Thermal Eradication of Staphylococcus epidermidis Biofilm Infections

Staphylococcus epidermidis is a major contributor to bacterial infections on medical implants, currently treated by surgical removal of the device and the surrounding infected tissue at considerable morbidity and expense. In situ hyperthermia is being investigated as a non-invasive means of mitigating these bacterial biofilm infections, but minimizing damage to the surrounding tissue requires augmenting the thermal shock with other approaches such as antibiotics and discerning the minimum shock required to eliminate the biofilm. S. epidermidis biofilms were systematically shocked at a variety of temperatures (50-80 °C) and durations (1-10 min) to characterize their thermal susceptibility and compare it to other common nosocomial pathogens such as Staphylococcus aureus and Pseudomonas aeruginosa. Biofilms were also exposed to three classes of antibiotics (ciprofloxacin, tobramycin and erythromycin) separately at concentrations ranging from 0 to 128 μg mL-1 to evaluate their impact on the efficacy of thermal shock and the subsequent potential regrowth of the biofilm. S. epidermidis biofilms were shown to be more thermally susceptible to hyperthermia than other common bacterial pathogens. All three antibiotics substantially decreased the duration and/or temperature needed to eliminate the biofilms, though this augmentation did not meet the criteria of synergism immediately following thermal shock. Subsequent reincubation, however, revealed strong synergism on a longer timescale.

Biomaterials coated with zwitterionic polymer brush demonstrated significant resistance to bacterial adhesion and biofilm formation in comparison to brush coatings incorporated with antibiotics

A critical problem with the use of biomaterial implants is associated with bacterial adhesion on the surface of implants and in turn the biofilm formation. Among different strategies that have been reported to resolve this dilemma, surface design combined with both antiadhesive and antimicrobial properties has proven to be highly effective. Physiochemical properties of polymer brush coatings possess non-adhesive capability against bacterial adhesion and create a niche for further functionalization. The current study aims to evaluate the effect of antibiotics incorporated into the polymer brush on bacterial adhesion and biofilm formation. Brushes made of zwitterionic polymers were synthesized, functionalized with vancomycin via both physical and chemical conjugation, and grafted onto the silicon rubber surfaces. Antibacterial and antiadhesive measurements of designed coated biomaterials were mediated through the use of a parallel plate flow chamber against biofilm growth developed by Staphylococcus aureus and Escherichia coli over a period of 24 h. The analysis of biofilm growth on designed coated biomaterials showed that the pristine coated zwitterionic brushes are significantly resistant to bacterial adhesion and biofilm formation but not in the polymer brush coating incorporated with antibiotics.

The potential of therapeutic hyperthermia to eradicate Staphylococcus aureus bacteria; an in vitro study

Staphylococcus aureus is one of the most common infectious agents, causing morbidity and mortality worldwide. Most pathogenic bacteria are classified in the group of mesophilic bacteria and the optimal growth temperature of these bacteria changes between 33 and 41 °C. Increased temperature can inhibit bacterial growth and mobility, which in turn, can trigger autolysis and cause cell wall damage. Hyperthermia treatment is defined as a heat-mediated treatment method applied using temperatures higher than body temperature. Nowadays, this treatment method is used especially in the treatment of tumours. Hyperthermia treatment is divided into two groups: mild hyperthermia and ablative or high-temperature hyperthermia. Mild hyperthermia is a therapeutic technique in which tumour tissue is heated above body temperature to produce a physiological or biological effect but is often not aimed at directly causing significant cell death. The goal of this method is to achieve temperatures of 40-45 °C in human tissues for up to 2 h. Hyperthermia can be used in the treatment of infections caused by such bacterial pathogens. In addition, using hyperthermia in combination with antimicrobial drugs may result in synergistic effects and reduce resistance issues. In our study, we used two different temperature levels (37 °C and 45 °C). We assessed growth inhibition, some virulence factors, alteration colony morphologies, and antimicrobial susceptibility for several antibiotics with three methods (Kirby-Bauer, E-test and broth microdilution) under hyperthermia. In the study, we observed that hyperthermia affected the urease enzyme, antibiotic sensitivity levels showed synergy with hyperthermia, and changes occurred in colony diameters and affected bacterial growth. We hypothesise that hyperthermia might be a new therapeutic option for infectious diseases as a sole agent or in combination with different antimicrobials.

Current State of Knowledge on the Definition, Pathophysiology, Etiology, Outcomes, and Management of Fever in the Intensive Care Unit

Fever-an elevated body temperature-is a prominent feature of a wide range of disease conditions and is a common finding in intensive care, affecting up to 70% of patients in the intensive care unit (ICU). The causes of fever in the ICU are multifactorial, and it can be due to a number of infective and noninfective etiologies. The production of fever represents a complex physiological, adaptive host response that is beneficial for host defense and survival but can be maladaptive and harmful if left unabated. Despite any cause, fever is associated with a wide range of cellular, local, and systemic effects, including multiorgan dysfunction, systemic inflammation, poor neurological recovery, and an increased risk of mortality. This narrative review presents the current state-of-the-art knowledge on the definition, pathophysiology, etiology, and outcomes of fever in the ICU and highlights evidence-based findings regarding the management of fever in the intensive care setting.

Temperature control in sepsis

Fever can be viewed as an adaptive response to infection. Temperature control in sepsis is aimed at preventing potential harms associated with high temperature (tachycardia, vasodilation, electrolyte and water loss) and therapeutic hypothermia may be aimed at slowing metabolic activities and protecting organs from inflammation. Although high fever (>39.5°C) control is usually performed in critically ill patients, available cohorts and randomized controlled trials do not support its use to improve sepsis prognosis. Finally, both spontaneous and therapeutic hypothermia are associated with poor outcomes in sepsis.

Date (Phoenix dactylifera L.) seed oil is an agro-industrial waste with biopreservative effects and antimicrobial activity

Antimicrobial resistant (AMR) infections are a leading health threat globally. Previous literature has underscored the farm-to-fork continuum as a potential focal point for the emergence and spread of AMR. In the present study, date (Phoenix dactylifera L.) seed oil was investigated for its chemical composition and antimicrobial activity against common foodborne pathogens including Escherichia coli O157:H7, Salmonella enteritidis, Salmonella typhimurium, Listeria monocytogenes, and Staphylococcus aureus in vitro, and in ultra-high-temperature (UHT) milk as a food model at storage temperatures of 37 °C (24 h) and 10 °C (7 days). GC-MS analysis of the seed oil revealed 20 compounds, with octadecane (52.2-55.4%) as the major constituent, and the fatty acid analysis revealed 17 fatty acids, with oleic acid (42.3-43.1%) as the main constituent, followed by lauric acid (19.8-20.3%). The antimicrobial activity of date seed oil was determined using the microdilution method. A significant inhibition against gram-negative bacteria was noted in microbiological media and UHT milk, with a log reduction ranging from 4.3 to 6.7 (at 37 °C/24 h) and 5.7 to 7.2 (at 10 °C/7 days), respectively, at oil concentrations ranging between 10 and 15 µl/ml. The oil showed a similar significant inhibitory effect against St. aureus in the microbiological media (2.0-6.0 log reduction), whereas the inhibitory effect against L. monocytogenes was not statistically significant, with a maximum log reduction of 0.64 achieved at a concentration of 10 µl/ml. AFM imaging of the bacteria showed that oil treatment led to morphological changes in the bacteria including the formation of distorted shapes, surface blebs, indentations, stiffness, and swelling. Present findings suggest that date seed oil can be a promising by-product with potential antimicrobial activity and a food preservative.

Therapeutic hyperthermia for the treatment of infection-a narrative review

Modulating body temperature, mostly through the use of antipyretics, is a commonly employed therapeutic intervention in medical practice. However, emerging evidence suggests that hyperthermia could serve as an adjuvant therapy for patients with infection. We performed a narrative review to explore the application of therapeutic hyperthermia in the treatment of infection. A number of studies have been performed in the pre-antibiotic era, enrolling patients with neurosyphilis and gonococcal infections, with reported cure rates at around 60%-80%. We have outlined the potential molecular and immunological mechanisms explaining the possible beneficial effects of therapeutic hyperthermia. For some pathogens increased temperature exerts a direct negative effect on virulence; however, it is presumed that temperature driven activation of the immune system is probably the most important factor affecting microbial viability. Lastly, we performed a review of modern-era studies where modulation of body temperature has been used as a treatment strategy. In trials of therapeutic hypothermia in patients with infection worse outcomes have been observed in the hypothermia group. Use of antipyretics has not been associated with any improvement in clinical outcomes. In modern-era therapeutic hyperthermia achieved by physical warming has been studied in one pilot trial, and better survival was observed in the hyperthermia group. To conclude, currently there is not enough data to support the use of therapeutic hyperthermia outside clinical trials; however, available studies are in favor of at least a temperature tolerance strategy for non-neurocritical patients.

Hyperthermia Prevents In Vitro and In Vivo Biofilm Formation on Endotracheal Tubes

There is currently an urgent need to find new strategies to tackle antimicrobial resistance and biofilm-related infections. This study has two aims. First, we evaluated the in vitro efficacy of hyperthermia in preventing biofilm formation on the surfaces of polyvinyl chloride discs. Second, we assessed the in vivo efficacy of hyperthermia in preventing biofilm formation in endotracheal tubes (ETTs) of a rabbit model. For the in vitro studies, nine clinical extensively drug-resistant/multidrug-resistant Gram-negative isolates of Acinetobacter baumannii, Klebsiella pneumoniae, and Pseudomonas aeruginosa and three clinical methicillin-resistant Staphylococcus aureus strains were studied. For biofilm formation, an adhesion step of 30 or 90 min followed by a growth step of 24 h were performed with application of one, two, and three pulses at 42°C for 15 min each pulse after the adhesion step. For the in vivo studies, New Zealand rabbits were intubated with ETTs previously colonized with K. pneumoniae or P. aeruginosa strains, and three pulses at 42°C for 15 min were applied after the adhesion step. The application of three pulses at 42°C for 15 min each pulse was needed to achieve the prevention of the in vitro biofilm formation of 100% of the tested strains. The application of heat pulses in a rabbit intubation model led to biofilm prevention of 85% against two K. pneumoniae strains and 80% against two P. aeruginosa strains compared to the control group. Hyperthermia application through pulses at 42°C could be a new nonantibiotic strategy to prevent biofilm formation in ETTs. IMPORTANCE Biofilm-producing microorganisms are considered medically crucial since they cause 80% of the infections that occur in the human body. Medical devices such as endotracheal tubes (ETTs) can act as a reservoir for pathogens providing the surface to which microorganisms can adhere and cause biofilm-associated infections in critically ill patients. This biofilm has been related with the development of ventilator-associated pneumonia (VAP), with an incidence of 8 to 28%, a mortality rate up to 17% and its associated high extra costs. Although some VAP-preventive measures have been reported, they have not demonstrated a significant reduction of VAP incidence. Therefore, we present a new nonantibiotic strategy based on hyperthermia application to prevent biofilm formation inside ETTs. This technology could reduce VAP incidence, intubation duration, hospital and intensive care unit (ICU) length stays, and mortality rates. Consequently, this could decrease the antibiotics administered and influence the impact of antibiotic resistance in the ICU.

Effectiveness of mechanical cleaning, antibiotics, and induction heating on eradication of Staphylococcus aureus in mature biofilms

Aims

Here we used a mature seven-day biofilm model of Staphylococcus aureus, exposed to antibiotics up to an additional seven days, to establish the effectiveness of either mechanical cleaning or antibiotics or non-contact induction heating, and which combinations could eradicate S. aureus in mature biofilms.

Methods

Mature biofilms of S. aureus (ATCC 29213) were grown on titanium alloy (Ti6Al4V) coupons for seven days and were subjected to the following treatments or their combinations: antibiotics, mechanical cleaning, or heat shock by induction heating of 60°C for one minute. Experiments were repeated at least five times.

Results

In the untreated biofilm, growth up to 1.8×10¹¹ colony-forming units (CFU)/cm² was observed. Treatment with ciprofloxacin, flucloxacillin, vancomycin, cefuroxime, and amoxicillin all with rifampicin gave 6.0 log, 6.1 log, 1.4 log, 4.8 log, and 3.6 log reduction in CFU/cm², respectively. Mechanical cleaning alone resulted in 4.9 log reduction and induction heating in 7.3 log reduction. There was an additional effect of ciprofloxacin, flucloxacillin, and induction heating when used in combinations. There was no additional effect for mechanical cleaning. No bacterial growth could be detected after induction heating followed by seven days of ciprofloxacin with rifampicin.

Conclusion

Mechanical cleaning, antibiotics, and non-contact induction heating reduced the bacterial load of mature S. aureus biofilms with approximately 5 log or more as a single treatment. The effect of mechanical cleaning on mature S. aureus biofilms was limited when used in combination with antibiotics and/or induction heating.

Cite this article: Bone Joint Res 2022;11(9):629–638.

Sweet light o' mine: Photothermal and photodynamic inactivation of tenacious pathogens using conjugated polymers

Each year a rising number of infections can not be successfully treated owing to the increasing pandemic of antibiotic resistant pathogens. The global shortage of innovative antibiotics fuels the emergence and spread of drug resistant microbes. Basic research, development, and applications of alternative therapies are urgently needed. Since the 90´s, light-mediated therapies have promised to be the next frontier combating multidrug-resistance microbes. These platforms have demonstrated to be a reliable, rapid, and efficient alternative to eliminate tenacious pathogens while avoiding the emergence of resistance mechanisms. Among the materials showing antimicrobial activity triggered by light, conjugated polymers (CPs) have risen as the most promising option to tackle this complex situation. These materials present outstanding characteristics such as high absorption coefficients, great photostability, easy processability, low cytotoxicity, among others, turning them into a powerful class of photosensitizer (PS)/photothermal agent (PTA) materials. Herein, we summarize and discuss the advances in the field of CPs with applications in photodynamic inactivation and photothermal therapy towards bacteria elimination. Additionally, a section of current challenges and needs in terms of well-defined benchmark experiments and conditions to evaluate the efficiency of phototherapies is presented.

Warming up for a better fever: a randomized pilot study in pediatric oncology

BACKGROUND

Fever in children is a major problem in pediatric oncology. Usual management leads to immediate antibiotic and antipyretic therapy, although there is consensus that antipyretic therapy should not be utilized with the sole aim of reducing body temperature. Increased body temperature during fever appears to be an effective modifier in terms of viral replication and enhanced host defense mechanisms against pathogens. Therefore, it might be beneficial to support febrile patients by applying gentle heat during the onset of fever to help the body to reach its new thermoregulatory set point.

METHODS

A randomized pilot study over 6 months will be conducted in a pediatric oncology department in an academic hospital in Germany. This study is a preparation for a multicenter clinical trial with two parallel groups concerning the efficacy of heat application vs. treatment as usual. One of the inclusion criteria is body temperatures ≥ 38.0 °C in n = 24 cases of patients receiving chemotherapy aged 18 months to 17 years. The first intervention consists of gentle heat application with hot water bottles at any sign of illness and onset of fever. The aim is to achieve a warm periphery equilibrated to trunk temperature of less than 0.5 °C. The second intervention is the avoidance of antipyretics. The control group receives the standard antipyretic treatment from the participating hospital. The purposes of this pilot study are proof of principle of intervention, evaluation of safety, feasibility, definition of endpoints, and to receive basic data for sample size calculation and needed resources.

DISCUSSION

The main goal is to improve the care of children with cancer by providing the best possible support for febrile episodes. If fever support by heat reduces discomfort, administration of antipyretics and maybe even antibiotics, this would be an advancement in oncological fever management. This pilot study is intended to provide a basis for a main, multicenter, randomized trial and demonstrate the practicability of heat application in febrile patients in pediatric oncology.

TRIAL REGISTRATION

German Clinical Trials Register (DRKS), DRKS00028273 . Registered on 14 April 2022.

Aptamer-Targeted Drug Delivery for Staphylococcus aureus Biofilm

Treatment of Staphylococcus aureus biofilm infections using conventional antibiotic therapy is challenging as only doses that are sublethal to the biofilm can be administered safely to patients. A potential solution to this challenge is targeted drug delivery. In this study, we tailored an aptamer-targeted liposomal drug delivery system for accumulation and delivery of antibiotics locally in S. aureus biofilm. In our search for a suitable targeting ligand, we identified six DNA aptamers that bound to S. aureus cells in biofilms, and we demonstrated that one of these aptamers could facilitate accumulation of liposomes around S. aureus cells inside the biofilm. Aptamer-targeted liposomes encapsulating a combination of vancomycin and rifampicin were able to eradicate S. aureus biofilm upon 24 h of treatment in vitro. Our results point to that aptamer-targeted drug delivery of antibiotics is a potential new strategy for treatment of S. aureus biofilm infections.

The role of antibiotics and heavy metals on the development, promotion, and dissemination of antimicrobial resistance in drinking water biofilms

Antimicrobial resistance (AMR), as well as the development of biofilms in drinking water distribution systems (DWDSs), have become an increasing concern for public health and management. As bulk water travels from source to tap, it may accumulate contaminants of emerging concern (CECs) such as antibiotics and heavy metals. When these CECs and other selective pressures, such as disinfection, pipe material, temperature, pH, and nutrient availability interact with planktonic cells and, consequently, DWDS biofilms, AMR is promoted. The purpose of this review is to highlight the mechanisms by which AMR develops and is disseminated within DWDS biofilms. First, this review will lay a foundation by describing how DWDS biofilms form, as well as their basic intrinsic and acquired resistance mechanisms. Next, the selective pressures that further induce AMR in DWDS biofilms will be elaborated. Then, the pressures by which antibiotic and heavy metal CECs accumulate in DWDS biofilms, their individual resistance mechanisms, and co-selection are described and discussed. Finally, the known human health risks and current management strategies to mitigate AMR in DWDSs will be presented. Overall, this review provides critical connections between several biotic and abiotic factors that influence and induce AMR in DWDS biofilms. Implications are made regarding the importance of monitoring and managing the development, promotion, and dissemination of AMR in DWDS biofilms.

Hybrid donor-acceptor polymer nanoparticles and combination antibiotic for mitigation of pathogenic bacteria and biofilms

Biofilms pose a significant clinical problem in skin and soft tissue infections. Their resistance to antibiotics has spurred investigations into alternative treatments, such as nanoparticle-mediated photothermal ablation. Non-toxic Hybrid Donor- Acceptor (DA) Polymer nanoParticles (H-DAPPs) were developed for fluorescence imaging (using poly(3-hexylthiophene-2,5 diyl) (P3HT)) and rapid, near-infrared photothermal ablation (NIR- PTA) (using poly[4,4-bis(2-ethylhexyl)-cyclopenta[2,1-b;3,4-b']dithiophene-2,6-diyl-alt-2,1,3-benzoselenadiazole-4,7-diyl] (PCPDTBSe)). H-DAPPs were evaluated alone, and in combination with antibiotics, against planktonic S. aureus and S. pyogenes, and S. aureus biofilms. H-DAPPs NIR-PTA (15-700 μg/ mL) can generate rapid temperature changes of 27.6-73.1 °C, which can eradicate planktonic bacterial populations and reduce biofilm bacterial viability by more than 4- log (> 99.99%) with exposure to 60 s of 800 nm light. Reductions were confirmed via confocal analysis, which suggested that H-DAPPs PTA caused bacterial inactivation within the biofilms, but did not significantly reduce biofilm polysaccharides. SEM imaging revealed structural changes in biofilms after H-DAPPs PTA. S. aureus biofilms challenged with 100 μg/mL of H-DAPPs (H-DAPPs-100) to induce an average temperature of 55.1 °C, and the minimum biofilm eradication concentration (MBEC) of clindamycin, resulted in up to ~3- log decrease in bacterial viability compared to untreated biofilms and those administered H-DAPPs-100 PTA only, and up to ~2- log compared to biofilms administered only clindamycin. This study demonstrates that polymer nanoparticle PTA can mitigate biofilm infection and may improve antimicrobial efficacy.

Thermal Shock and Ciprofloxacin Act Orthogonally on Pseudomonas aeruginosa Biofilms

Bacterial biofilm infections are a major liability of medical implants, due to their resistance to both antibiotics and host immune response. Thermal shock can kill established biofilms, and some evidence suggests antibiotics may enhance this efficacy, despite having an insufficient effect themselves. The nature of this interaction is unclear, however, complicating efforts to integrate thermal shock into implant infection treatment. This study aimed to determine whether these treatments were truly synergistic or simply orthogonal (i.e., independent). Pseudomonas aeruginosa biofilms of different architectures and stationary-phase population density were subjected to various thermal shocks, antibiotic exposures, or combinations thereof, and examined either immediately after treatment or after subsequent reincubation. Population decreases from the combination treatment matched the product of the decreases of individual treatments, indicating their orthogonality. However, reincubation showed binary behavior, where biofilms with an immediate population decrease beyond a critical factor (~104) died off completely during reincubation, while biofilms with a smaller immediate decrease regrew. This critical factor was independent of the initial population density and the combination of treatments that achieved the immediate decrease. While antibiotics do not appear to enhance thermal shock directly, their contribution to achieving a critical population decrease for biofilm elimination can make the treatments appear strongly synergistic, strongly decreasing the intensity of thermal shock needed.

In vitro activity of hyperthermia on swarming motility and antimicrobial susceptibility profiles of Proteus mirabilis isolates

AIM

Swarming motility is a virulence factor for Proteus mirabilis and is a coordinated multicellular movement of bacteria. In this study, we investigated the inhibitory effect of hyperthermia on bacterial swarming motility and antimicrobial resistance.

METHODS

Thirty-one P. mirabilis isolates were included in the study. Seven inoculated agar plates were incubated inside incubators with increasing temperature levels: at 36 °C (control) and 40-45 °C. On the next day, inhibition of swarming was evaluated and minimum paralyzing temperature (MPT) values were determined. An antimicrobial susceptibility test (antibiogram) is performed by exposing bacteria to increasing concentrations of antibiotics, in vitro. Thus, we used the Kirby-Bauer disk diffusion test as a screening method to analyze the antibiogram profiles of the isolates at 36 °C and 42 °C. Finally, a time-kill assay was performed to analyze the killing effect of hyperthermia (42 °C) on planktonic bacteria, in combination with the antibiotic meropenem at the first and third hours. A Wilcoxon signed-rank test was used to compare the killing effects of meropenem, hyperthermia and their combinations.

RESULTS

The median MPT value was determined as 44 °C. In the disk diffusion assay, susceptibility development was observed in 94% of isolates for at least one antibiotic. In the time-kill assay, we observed a significant killing effect of hyperthermia in combination with meropenem. Under the microscope, we observed the formation of spherical cells by the effect of heat.

CONCLUSION

We conclude that these findings might be useful when employing the hyperthermia method to treat infectious diseases caused by P. mirabilis in the future.

Adjuvant antibiotic-loaded bone cement: Concerns with current use and research to make it work

Antibiotic-loaded bone cement (ALBC) is broadly used to treat orthopaedic infections based on the rationale that high-dose local delivery is essential to eradicate biofilm-associated bacteria. However, ALBC formulations are empirically based on drug susceptibility from routine laboratory testing, which is known to have limited clinical relevance for biofilms. There are also dosing concerns with nonstandardized, surgeon-directed, hand-mixed formulations, which have unknown release kinetics. On the basis of our knowledge of in vivo biofilms, pathogen virulence, safety issues with nonstandardized ALBC formulations, and questions about the cost-effectiveness of ALBC, there is a need to evaluate the evidence for this clinical practice. To this end, thought leaders in the field of musculoskeletal infection (MSKI) met on 1 August 2019 to review and debate published and anecdotal information, which highlighted four major concerns about current ALBC use: (a) substantial lack of level 1 evidence to demonstrate efficacy; (b) ALBC formulations become subtherapeutic following early release, which risks induction of antibiotic resistance, and exacerbated infection from microbial colonization of the carrier; (c) the absence of standardized formulation protocols, and Food and Drug Administration-approved high-dose ALBC products to use following resection in MSKI treatment; and (d) absence of a validated assay to determine the minimum biofilm eradication concentration to predict ALBC efficacy against patient specific micro-organisms. Here, we describe these concerns in detail, and propose areas in need of research.

Synergy between induction heating, antibiotics, and N-acetylcysteine eradicates Staphylococcus aureus from biofilm

Background: Non-contact induction heating (NCIH) is a noninvasive treatment modality that can be used to cause thermal damage to bacterial biofilms on a metal implant surface in the context of a prosthetic joint infection. The purpose of this study was (1) to determine the effectiveness of NCIH on killing Staphylococcus aureus from biofilm and (2) to determine the possible synergistic effect of NCIH and cocktails of antibiotics and N-acetylcysteine (NAC).Methods: Staphylococcus aureus biofilms were grown on titanium alloy (Ti6Al4V) coupons. These coupons were heated to 50 °C, 60 °C, 70 °C, 80 °C, and 90 °C for 3.5 min and subsequently exposed to cocktails of vancomycin, rifampicin and NAC at clinically relevant concentrations over 24 h.Results: In the control group without induction heating, 2.2*10⁷ colony forming units (CFU)/cm² were observed. At 50 °C, 60 °C, 70 °C, 80 °C, and 90 °C, a reduction of 0.3-log, 3.9-log, 4.2-log, 4.3-log, and 6.6-log CFU/cm² were observed, respectively. There was synergy between antibiotics and induction heating that resulted in less than 100 CFU/cm² remaining after 3.5 min at 60 °C, and exposure to vancomycin and rifampicin. Total eradication was observed at 80 °C. Total eradication was also observed at 60 °C and a cocktail of antibiotics with NAC.Conclusion: Induction heating of titanium alloy coupons is effective for the reduction of bacterial load in vitro in S. aureus biofilms. Induction heating and cocktails of antibiotics and NAC have a synergistic effect that results in the total eradication of the biofilm at 60 °C and higher for clinically relevant concentrations of vancomycin, rifampicin and NAC.

The FeverApp registry - ecological momentary assessment (EMA) of fever management in families regarding conformity to up-to-date recommendations

BACKGROUND

Fever is one of the most common symptoms of pediatric consultations and its mismanagement is a health care burden. Guidelines on fever management are incoherent and data on fever management are still missing. This study protocol describes an app-based registry to evaluate the fever management of parents.

OBJECTIVE

The primary objectives are to assess guideline adherence (primary outcome) and parental confidence in managing fever, and thus to reduce overuse of antipyretics, antibiotics and healthcare providers. Secondary objectives include creating a "FeverApp" that will enable parents to handle fever safely and to use the FeverApp registry as symptom and fever management diary. Further objectives include developing and testing a symptom-led registry model by app-based acquisition of parental entries of febrile illness cycle data and developing and testing models of how an interactive app-based registry can enable nationwide EMA information to inform science, guideline and policy makers, and the public.

METHODS

A FeverApp, guiding parents and carers in handling and documenting fever, will be developed with family pediatricians according to current guidelines and recommended for all parents in Germany. A registry will anonymously document features, management and outcomes of febrile episodes: basic sociodemographic and medical information, initial symptoms, course of fever, pharmacological and non-pharmacological interventions, consultations with doctors, outcomes, fever-associated fears, and app satisfaction.

RESULTS

This app may improve communication quality and health, e.g. asthma and antimicrobial resistance. Results will be published via website www.feverapp.de .

TRIAL REGISTRATION

This app-based registry protocol is registered in the German Clinical Trials Register (DRKS) with registration number: DRKS00016591 .

Molecular Detection of Genes Involved in Biofilm Formation in Staphylococcus aureus Strains Isolates: Evidence From Shahid Motahari Hospital in Tehran

Background: Infections caused by Staphylococcus aureus strains are a major public health challenge worldwide, especially in specialized burn hospitals. Infections caused by S. aureus account for more than 50% of burn-related deaths. Objectives: Since data on characteristics of these isolates are not sufficient, the current study aimed to assess the prevalence of resistance to antibacterial agents and to analyze the distribution of biofilm, and adhesion encoding genes among S. aureus strains isolated from burn patients in Motahari Hospital, Tehran, Iran. Methods: A total of 83 S. aureus strains were collected from burn wounds of patients admitted to a referral burn center in Tehran for 10 months. In vitro antibacterial susceptibility of isolates was evaluated using the Kirby-Bauer disk diffusion method. Strains were subjected to polymerase chain reaction (PCR) to determine the presence of nucA, mecA, ebps, cna, bbp, fnbA, fnbB, clfA, and clfB genes. Results: The highest frequency of resistance was found to cephalexin and cefoxitin (87.9%), followed by clindamycin (75.9%), erythromycin (72.3%), and ciprofloxacin (60.2%). Five resistance patterns were identified in which cephalexin, cefoxitin, clindamycin, erythromycin, and ciprofloxacin had the most predominant resistance profile (36.1%). Biofilm gene detection indicated a markedly high prevalence of cna (74.7%), clfB (54.2%), clfA (50.6%), fnbA (42.1%), ebp (13.2%), and fnbB (12%). Six different biofilm genetic patterns were identified, wherein clfA, clfB, fnbA, ebp, and cna (30.1%), clfA, clfB, fnbA, fnbB, ebp, and cna (12%), and clfA, clfB, and cna (8.4%) were the top three most frequently identified patterns. Conclusions: The prevalence of biofilm encoding genes, which are associated with multidrug resistance in S. aureus strains isolated from burn patients, is high. Therefore, identification of epidemiology, molecular characteristics, and biofilm management of S. aureus infection in burn units would be helpful.

Antimicrobial Susceptibility Testing of Antimicrobial Peptides to Better Predict Efficacy

During the development of antimicrobial peptides (AMP) as potential therapeutics, antimicrobial susceptibility testing (AST) stands as an essential part of the process in identification and optimisation of candidate AMP. Standard methods for AST, developed almost 60 years ago for testing conventional antibiotics, are not necessarily fit for purpose when it comes to determining the susceptibility of microorganisms to AMP. Without careful consideration of the parameters comprising AST there is a risk of failing to identify novel antimicrobials at a time when antimicrobial resistance (AMR) is leading the planet toward a post-antibiotic era. More physiologically/clinically relevant AST will allow better determination of the preclinical activity of drug candidates and allow the identification of lead compounds. An important consideration is the efficacy of AMP in biological matrices replicating sites of infection, e.g., blood/plasma/serum, lung bronchiolar lavage fluid/sputum, urine, biofilms, etc., as this will likely be more predictive of clinical efficacy. Additionally, specific AST for different target microorganisms may help to better predict efficacy of AMP in specific infections. In this manuscript, we describe what we believe are the key considerations for AST of AMP and hope that this information can better guide the preclinical development of AMP toward becoming a new generation of urgently needed antimicrobials.

Induction heating for eradicating Staphylococcus epidermidis from biofilm

Aims

Induction heating is a noninvasive, nonantibiotic treatment modality that can potentially be used to cause thermal damage to the bacterial biofilm on the metal implant surface. The purpose of this study was to determine the effectiveness of induction heating on killing Staphylococcus epidermidis from biofilm and to determine the possible synergistic effect of induction heating and antibiotics.

Methods

S. epidermidis biofilms were grown on titanium alloy (Ti6Al4V) coupons for 24 hours (young biofilm) and seven days (mature biofilm). These coupons with biofilm were heated to temperatures of 50°C, 55°C, 60°C, 65°C, 70°C, 80°C, and 90°C for 3.5 minutes and subsequently exposed to vancomycin and rifampicin at clinically relevant concentrations.

Results

For the young biofilm, total eradication was observed at 65°C or higher for 3.5 minutes followed by 24 hours of vancomycin 10 mg/l and rifampicin 1 mg/l. For the mature biofilm, total eradication was observed at 60°C for 3.5 minutes followed by 24 hours of vancomycin 10 mg/l and rifampicin 1 mg/l. Total eradication was also observed at 60°C for 3.5 minutes followed by 24 hours of vancomycin 1 mg/l and rifampicin 1 mg/l followed by another thermal shock of 60°C for 3.5 minutes (two thermal shocks).

Conclusion

Induction heating of Ti6Al4V coupons is effective in reducing bacterial load in vitro for S. epidermidis biofilms. Induction heating and antibiotics have a synergistic effect resulting in total eradication of the biofilm at 60°C or higher for clinically relevant concentrations of vancomycin and rifampicin.

Cite this article:Bone Joint Res. 2020;9(4):192–199.

Bimetallic gold-silver nanoparticles mediate bacterial killing by disrupting the actin cytoskeleton MreB

The actin cytoskeleton is required for the maintenance of the cell shape and viability of bacteria. It remains unknown to which extent nanoparticles (NPs) can orchestrate the mechanical instability by disrupting the cytoskeletal network in bacterial cells. Our work demonstrates that Au-Ag NPs disrupt the bacterial actin cytoskeleton specifically, fluidize the inner membrane and lead to killing of bacterial cells. In this study, we have tried to emphasize on the key parameters important for NP-cell interactions and found that the shape, specific elemental surface localization and enhanced electrostatic interaction developed due to the acquired partial positive charge by silver atoms in the aggregated NPs are some of the major factors contributing towards better NP interactions and subsequent cell death. In vivo studies in bacterial cells showed that the NPs exerted a mild perturbation of the membrane potential. However, its most striking effect was on the actin cytoskeleton MreB resulting in morphological changes in the bacterial cell shape from rods to predominantly spheres. Exposure to NPs resulted in the delocalization of MreB patches from the membrane but not the tubulin homologue FtsZ. Concomitant with the redistribution of MreB localization, a dramatic increase of membrane fluid regions was observed. Our studies reveal for the first time that Au-Ag NPs can mediate bacterial killing and disrupt the actin cytoskeletal functions in bacteria.

Sonobactericide: An Emerging Treatment Strategy for Bacterial Infections

Ultrasound has been developed as both a diagnostic tool and a potent promoter of beneficial bio-effects for the treatment of chronic bacterial infections. Bacterial infections, especially those involving biofilm on implants, indwelling catheters and heart valves, affect millions of people each year, and many deaths occur as a consequence. Exposure of microbubbles or droplets to ultrasound can directly affect bacteria and enhance the efficacy of antibiotics or other therapeutics, which we have termed sonobactericide. This review summarizes investigations that have provided evidence for ultrasound-activated microbubble or droplet treatment of bacteria and biofilm. In particular, we review the types of bacteria and therapeutics used for treatment and the in vitro and pre-clinical experimental setups employed in sonobactericide research. Mechanisms for ultrasound enhancement of sonobactericide, with a special emphasis on acoustic cavitation and radiation force, are reviewed, and the potential for clinical translation is discussed.

Effects of biotic and abiotic factors on biofilm growth dynamics and their heterogeneous response to antibiotic challenge

Over the last couple of decades, with the crisis of new antimicrobial arsenal, multidrug-resistant clinical pathogens have been observed extensively. In clinical and medical settings, these persistent pathogens predominantly grow as complex heterogeneous structures enmeshed in a self-produced exopolysaccharide matrix, termed as biofilms. Since biofilms can rapidly form by adapting new environmental surroundings and have potential effect on human health, it is critical to study them promptly and consistently. Biofilm infections are challenging in the contamination of medical devices and implantations, food processing and pharmaceutical industrial settings, and in dental area caries, periodontitis and so on. The persistence of infections associated with biofilms has been mainly attributed to the increased antibiotic resistance offered by the cells growing in biofilms. In fact, it is well known that this recalcitrance of bacterial biofilms is multifactorial, and there are several resistance mechanisms that may act in parallel in order to provide an enhanced level of resistance to the biofilm. In combination, distinct resistance mechanisms significantly decrease our ability to control and eradicate biofilm-associated infections with current antimicrobial arsenal. In addition, various factors are known to influence the process of biofilm formation, growth dynamics, and their heterogeneous response towards antibiotic therapy. The current review discusses the contribution of cellular and physiochemical factors on the growth dynamics of biofilm, especially their role in antibiotic resistance mechanisms of bacterial population living in surface attached growth mode. A systematic investigation on the effects and treatment of biofilms may pave the way for novel therapeutic strategies to prevent and treat biofilms in healthcare and industrial settings.

Bayesian inversion for a biofilm model including quorum sensing

We propose a mathematical model based on a system of partial differential equations (PDEs) for biofilms. This model describes the time evolution of growth and degradation of biofilms which depend on environmental factors. The proposed model also includes quorum sensing (QS) and describes the cooperation among bacteria when they need to resist against external factors such as antibiotics. The applications include biofilms on teeth and medical implants, in drinking water, cooling water towers, food processing, oil recovery, paper manufacturing, and on ship hulls. We state existence and uniqueness of solutions of the proposed model and implement the mathematical model to discuss numerical simulations of biofilm growth and cooperation. We also determine the unknown parameters of the presented biofilm model by solving the corresponding inverse problem. To this end, we propose Bayesian inversion techniques and the delayed-rejection adaptive-Metropolis (DRAM) algorithm for the simultaneous extraction of multiple parameters from the measurements. These quantities cannot be determined directly from the experiments or from the computational model. Furthermore, we evaluate the presented model by comparing the simulations using the estimated parameter values with the measurement data. The results illustrate a very good agreement between the simulations and the measurements.

Quantifying bacterial cell lysis using GFP based fluorimetric assay

Quantitative measurement of cell lysis against a given microbial strain is essential to calculate the antimicrobial potency of protein/peptide/nanomaterial based formulations. Fluorescence spectroscopy based measurements offer precise quantification of a process via selected flurophore emission profile. In this context, we elucidate a reliable and robust green fluorescent protein (GFP) based fluorescence spectroscopy protocol to evaluate the antimicrobial activity of proteins. The technique is based on the fact that the intensity of the GFP emission released from cells correlates with cell lysis and henceforth the antimicrobial potential of the chosen agent. The technique was demonstrated with two different families of bacteriophage endolysins (T7 and T4 endolysins) using GFP expressing E. coli cells. The GFP based method allowed the absolute quantification of T4 and T7 endolysins cell lysis characteristics at different pH, salt concentrations, and metal ions. The results obtained from GFP based fluorimetric assay were substantiated with turbidimetric assay and fluorescence microscopy. This fluorimetric method in conjugation with different GFP expressing microbial strains and antimicrobial agents can be efficiently applied as a quantification technique to precisely measure cell lysis.

Segmental induction heating of orthopaedic metal implants

Objectives

Prosthetic joint infection (PJI) is a devastating complication following total joint arthroplasty. Non-contact induction heating of metal implants is a new and emerging treatment for PJI. However, there may be concerns for potential tissue necrosis. It is thought that segmental induction heating can be used to control the thermal dose and to limit collateral thermal injury to the bone and surrounding tissues. The purpose of this study was to determine the thermal dose, for commonly used metal implants in orthopaedic surgery, at various distances from the heating centre (HC).

Methods

Commonly used metal orthopaedic implants (hip stem, intramedullary nail, and locking compression plate (LCP)) were heated segmentally using an induction heater. The thermal dose was expressed in cumulative equivalent minutes at 43°C (CEM43) and measured with a thermal camera at several different distances from the HC. A value of 16 CEM43 was used as the threshold for thermal damage in bone.

Results

Despite high thermal doses at the HC (7161 CEM43 to 66 640 CEM43), the thermal dose at various distances from the HC was lower than 16 CEM43 for the hip stem and nail. For the fracture plate without corresponding metal screws, doses higher than 16 CEM43 were measured up to 5 mm from the HC.

Conclusion

Segmental induction heating concentrates the thermal dose at the targeted metal implant areas and minimizes collateral thermal injury by using the non-heated metal as a heat sink. Implant type and geometry are important factors to consider, as they influence dissipation of heat and associated collateral thermal injury.

Cite this article: B. G. Pijls, I. M. J. G. Sanders, E. J. Kuijper, R. G. H. H. Nelissen. Segmental induction heating of orthopaedic metal implants. Bone Joint Res 2018;7:609–619. DOI: 10.1302/2046-3758.711.BJR-2018-0080.R1.

MoS2@polydopamine-Ag nanosheets with enhanced antibacterial activity for effective treatment of Staphylococcus aureus biofilms and wound infection

Developing novel antibacterial agents to combat bacterial infection has been an everlasting task for scientists, due to the drug resistance evolved by bacteria during antibiotic treatment. In this work, we used polydopamine (PDA) to modify MoS2 nanosheets (MoS2 NSs) and then grew silver nanoparticles (AgNPs) on their surface to form MoS2@PDA-Ag nanosheets (MPA NSs) as multimodal antibacterial nanoagents to treat Staphylococcus aureus (S. aureus) biofilms and S. aureus infected wounds. In vitro results show that treatment with MPA NSs under near-infrared (NIR) laser irradiation can efficiently eradicate the established S. aureus biofilms with 99.99% of the bacteria inside biofilms killed, which shows significantly enhanced therapeutic efficacy compared with the MPA only group or the NIR laser irradiation only group. Remarkably, MPA NSs were also successfully used to treat S. aureus infected wounds in mice under NIR laser irradiation. In vivo experiments demonstrate that about 99% of bacteria in wounds were killed and the healing of the infected wounds was promoted. Overall, this work demonstrates that MPA NSs with enhanced antibacterial activity are promising nanoagents to treat S. aureus biofilms and S. aureus infected wounds.

Clinical responses in cows vaccinated with a developed prototype killed Staphylococcus aureus mastitis vaccine

Mastitis is an inflammatory condition of the udder that occurs as a result of the release of leucocytes into the udder in a response to bacterial invasion. The major causes of mastitis are an array of gram positive and negative bacteria, however, algae, virus, fungi, mechanical or thermal injury to the gland have also been identified as possible causes. Mastitis vaccines are yet to be developed using Malaysian local isolate of bacteria. The objective of the present experimental trial was to develop a monovalent vaccine against mastitis using S. aureus of Malaysian isolate and to evaluate the clinical responses such as temperature, respiratory rates and heart rates in vaccinated cows. S. aureus is a major causative bacteria in clinical and subclinical types of mastitis in cows. Four concentrations of the bacterin (10⁶, 10⁷, 10⁸ and 10⁹ cfu/ml of the local isolate of S. aureus) were prepared using Aluminium potassium sulfate adjuvant. Thirty cows were grouped into four treatment groups (B, C, D and E) with a fifth group as control (A). These groups were vaccinated intramuscularly(IM) with the prepared monovalent vaccine and its influence on the vital signs were intermittently measured. The mean of rectal temperature was significantly different (p˂ 0.05) at 0hr Post Vaccination [1]" in groups D and E (39.5 ± 0.15 °C and 39.4 ± 0.15 °C respectively) and at 3 h PV in groups C, D and E (39.8 ± 0.14 °C, 39.9 ± 0.14 °C and 40.3 ± 0.14 °C respectively) compared to the control group. This indicated a sharp increased rectal temperatures between 0hr and 3 h PV in groups C, D and E which later declined at 24 h PV. The mean of rectal temperature of group E was significantly different (p˂ 0.05) at weeks 1 and 2 PV (39.87 ± 0.19 °C and 39.80 ± 0.18 °C respectively) compared to the control group. The mean of heart rate was significantly different (p˂ 0.05) at week 1 PV in groups D and E (83.0 ± 3.8 beats/minute and 80.0 ± 3.8 °C respectively) compared to control. A trending decrease was however observed in heart rates of group E from weeks through 4 PV and in group D from weeks 1 through 3 PV. The mean of respiratory rates was significantly different (p˂ 0.05) at week 3 PV in group B and D (31.0 ± 1.2 breaths/minute and 28.0 ± 1.2 breaths/minute) compared to control. In conclusion, this study highlights responses of these vital signs due to vaccination against S. aureus causing mastitis in cows. To the best of our knowledge the findings of this study adds value to the shallow literature on vital signs alterations in cows vaccinated against mastitis as elevated levels of temperature and heart rates of group D and E indicated obvious response.

High Intensity Focused Ultrasound (HIFU) Heating Improves Perfusion and Antimicrobial Efficacy in Mouse Staphylococcus Abscess

Chronic wounds typically require long-duration treatment with a combination of antibiotics administered systemically. This incurs adverse side effects and can require aversive surgical treatments and limb amputations. To improve non-invasive antimicrobial therapy, the objective of this study was to investigate antimicrobial chemotherapy combined with high-intensity focused ultrasound (HIFU) heating (HT). A Staphylococcus aureus abscess (80 ± 30 mm³) was generated in the mouse flank region. Once the average temperature (~42 °C-46 °C) in the abscess was reached with HIFU-HT, a broad-spectrum antimicrobial (ciprofloxacin, 10 mg/kg) and perfusion marker (Evans blue dye, 40 mg/kg wt) were administered intravenously via the tail vein. Four hours later, mean abscess perfusion and colony-forming units (CFUs) per gram of abscess were determined. HIFU-HT increased abscess perfusion by ~2.5-fold (4 ± 0.6 µg/mL Evans blue) compared with control (1.5 ± 0.7 µg/mL), and improved antimicrobial efficacy to decrease percentage average survival of S. aureus by ~20% (46 ± 7 CFUs/g of abscess) versus that seen with ciprofloxacin alone (61 ± 4 CFU/g). Our in vivo data suggest that HIFU-HT can improve antimicrobial treatment responses against deep-seated bacteria in abscess wounds via enhanced perfusion.

Does Extracellular DNA Production Vary in Staphylococcal Biofilms Isolated From Infected Implants versus Controls?

BACKGROUND

Prosthetic implant infections caused by Staphylococcus aureus and epidermidis are major challenges for early diagnosis and treatment owing to biofilm formation on the implant surface. Extracellular DNA (eDNA) is actively excreted from bacterial cells in biofilms, contributing to biofilm stability, and may offer promise in the detection or treatment of such infections.

QUESTIONS/PURPOSES

(1) Does DNA structure change during biofilm formation? (2) Are there time-dependent differences in eDNA production during biofilm formation? (3) Is there differential eDNA production between clinical and control Staphylococcal isolates? (4) Is eDNA production correlated to biofilm thickness?

METHODS

We investigated eDNA presence during biofilm formation in 60 clinical and 30 control isolates of S aureus and S epidermidis. The clinical isolates were isolated from patients with infections of orthopaedic prostheses and implants: 30 from infected hip prostheses and 30 from infected knee prostheses. The control isolates were taken from healthy volunteers who had not been exposed to antibiotics and a hospital environment during the previous 3 and 12 months, respectively. Control S epidermidis was isolated from the skin of the antecubital fossa, and control S aureus was isolated from the nares. For the biofilm experiments the following methods were used to detect eDNA: (1) fluorescent staining with 4',6-diamidino-2-phenylindole (DAPI), (2) eDNA extraction using a commercial kit, and (3) confocal laser scanning microscopy for 24-hour biofilm observation using propidium iodide and concanavalin-A staining; TOTO^®-1 and SYTO^® 60 staining were used for observation and quantification of eDNA after 6 and 24 hours of biofilm formation. Additionally antibiotic resistance was described.

RESULTS

eDNA production as observed by confocal laser scanning microscopy was greater in clinical isolates than controls (clinical isolates mean ± SD: 1.84% ± 1.31%; control mean ± SD: 1.17% ± 1.37%; p < 0.005) after 6 hours of biofilm formation. After 24 hours, the amount of eDNA was greater in biofilms of S epidermidis than in biofilms of S aureus (S aureus mean ± SD: 1.35% ± 2.0%; S epidermidis mean ± SD: 6.42% ± 10.6%; p < 0.05). Clinical isolates of S aureus and S epidermidis produced more eDNA than control isolates at 6 hours of biofilm formation. The extraction method also showed that clinical isolates produced substantially greater amounts of eDNA than controls.

CONCLUSIONS

S aureus and S epidermidis exhibit a differential production of DNA with time. Clinical isolates associated with implant infections produce greater amounts of eDNA than controls. Future research might focus on the diagnostic value of eDNA as a surrogate laboratory marker for biofilm formation in implant infections.

CLINICAL RELEVANCE

eDNA should be considered as a potential future diagnostic tool or even a possible target to modify biofilms for successful treatment of biofilm-associated infections.

Non-contact electromagnetic induction heating for eradicating bacteria and yeasts on biomaterials and possible relevance to orthopaedic implant infections: In vitro findings

Objectives

Infection of implants is a major problem in elective and trauma surgery. Heating is an effective way to reduce the bacterial load in food preparation, and studies on hyperthermia treatment for cancer have shown that it is possible to heat metal objects with pulsed electromagnetic fields selectively (PEMF), also known as induction heating. We therefore set out to answer the following research question: is non-contact induction heating of metallic implants effective in reducing bacterial load in vitro?

Methods

Titanium alloy cylinders (Ti6Al4V) were exposed to PEMF from an induction heater with maximum 2000 watts at 27 kHz after being contaminated with five different types of micro-organisms: Staphylococcus epidermidis; Staphylococcus aureus; Pseudomonas aeruginosa; spore-forming Bacillus cereus; and yeast Candida albicans. The cylinders were exposed to incremental target temperatures (35°C, 45°C, 50°C, 55°C, 60°C, 65°C, 70°C) for up to 3.5 minutes.

Results

There was an average linear heating rate of 0.39°C per second up to the target temperature, and thereafter the target temperature was maintained until the end of the experiment. At 60°C and higher (duration 3.5 minutes), there was a 6-log reduction or higher for every micro-organism tested. At 60°C, we found that the shortest duration of effective induction heating was 1.5 minutes. This resulted in a 5-log reduction or higher for every micro-organism tested.

Conclusion

Non-contact induction heating of a titanium disk is effective in reducing bacterial load in vitro. These promising results can be further explored as a new treatment modality for infections of metal orthopaedic implants.

Cite this article: B. G. Pijls, I. M. J. G. Sanders, E. J. Kuijper, R. G. H. H. Nelissen. Non-contact electromagnetic induction heating for eradicating bacteria and yeasts on biomaterials and possible relevance to orthopaedic implant infections: In vitro findings. Bone Joint Res 2017;6:323–330. DOI: 10.1302/2046-3758.65.BJR-2016-0308.R1.

Fever: Views in Anthroposophic Medicine and Their Scientific Validity

Objective. To conduct a scoping review to characterize how fever is viewed in anthroposophic medicine (AM) and discuss the scientific validity of these views. Methods. Systematic searches were run in Medline, Embase, CAMbase, and Google Scholar. Material from anthroposophic medical textbooks and articles was also used. Data was extracted and interpreted. Results. Most of the anthroposophic literature on this subject is in the German language. Anthroposophic physicians hold a beneficial view on fever, rarely suppress fever with antipyretics, and often use complementary means of alleviating discomfort. In AM, fever is considered to have the following potential benefits: promoting more complete recovery; preventing infection recurrences and atopic diseases; providing a unique opportunity for caregivers to provide loving care; facilitating individual development and resilience; protecting against cancer and boosting the anticancer effects of mistletoe products. These views are discussed with regard to the available scientific data. Conclusion. AM postulates that fever can be of short-term and long-term benefit in several ways; many of these opinions have become evidence-based (though still often not practiced) while others still need empirical studies to be validated, refuted, or modified.

Targeted antibiotic delivery using low temperature-sensitive liposomes and magnetic resonance-guided high-intensity focused ultrasound hyperthermia

Chronic non-healing wound infections require long duration antibiotic therapy, and are associated with significant morbidity and health-care costs. Novel approaches for efficient, readily-translatable targeted and localised antimicrobial delivery are needed. The objectives of this study were to 1) develop low temperature-sensitive liposomes (LTSLs) containing an antimicrobial agent (ciprofloxacin) for induced release at mild hyperthermia (∼42 °C), 2) characterise in vitro ciprofloxacin release, and efficacy against Staphylococcus aureus plankton and biofilms, and 3) determine the feasibility of localised ciprofloxacin delivery in combination with MR-HIFU hyperthermia in a rat model. LTSLs were loaded actively with ciprofloxacin and their efficacy was determined using a disc diffusion method, MBEC biofilm device, and scanning electron microscopy (SEM). Ciprofloxacin release from LTSLs was assessed in a physiological buffer by fluorescence spectroscopy, and in vivo in a rat model using MR-HIFU. Results indicated that < 5% ciprofloxacin was released from the LTSL at body temperature (37 °C), while >95% was released at 42 °C. Precise hyperthermia exposures in the thigh of rats using MR-HIFU during intravenous (i.v.) administration of the LTSLs resulted in a four fold greater local concentration of ciprofloxacin compared to controls (free ciprofloxacin + MR-HIFU or LTSL alone). The biodistribution of ciprofloxacin in unheated tissues was fairly similar between treatment groups. Triggered release at 42 °C from LTSL achieved significantly greater S. aureus killing and induced membrane deformation and changes in biofilm matrix compared to free ciprofloxacin or LTSL at 37 °C. This technique has potential as a method to deliver high concentration antimicrobials to chronic wounds.

Iron oxide nanoparticle-mediated hyperthermia stimulates dispersal in bacterial biofilms and enhances antibiotic efficacy

The dispersal phase that completes the biofilm lifecycle is of particular interest for its potential to remove recalcitrant, antimicrobial tolerant biofilm infections. Here we found that temperature is a cue for biofilm dispersal and a rise by 5 °C or more can induce the detachment of Pseudomonas aeruginosa biofilms. Temperature upshifts were found to decrease biofilm biomass and increase the number of viable freely suspended cells. The dispersal response appeared to involve the secondary messenger cyclic di-GMP, which is central to a genetic network governing motile to sessile transitions in bacteria. Furthermore, we used poly((oligo(ethylene glycol) methyl ether acrylate)-block-poly(monoacryloxy ethyl phosphate)-stabilized iron oxide nanoparticles (POEGA-b-PMAEP@IONPs) to induce local hyperthermia in established biofilms upon exposure to a magnetic field. POEGA-b-PMAEP@IONPs were non-toxic to bacteria and when heated induced the detachment of biofilm cells. Finally, combined treatments of POEGA-b-PMAEP@IONPs and the antibiotic gentamicin reduced by 2-log the number of colony-forming units in both biofilm and planktonic phases after 20 min, which represent a 3.2- and 4.1-fold increase in the efficacy against planktonic and biofilm cells, respectively, compared to gentamicin alone. The use of iron oxide nanoparticles to disperse biofilms may find broad applications across a range of clinical and industrial settings.