High-level formation of active Pseudomonas cepacia lipase after heterologous expression of the encoding gene and its modified chaperone in Escherichia coli and rapid in vitro refolding

Disruption of SMC-related genes promotes recombinant cholesterol esterase production in Burkholderia stabilis

Burkholderia stabilis strain FERMP-21014 secretes cholesterol esterase (BsChe), which is used in clinical settings to determine serum cholesterol levels. Previously, we constructed an expression plasmid with an endogenous constitutive promoter to enable the production of recombinant BsChe. In this study, we obtained one mutant strain with 13.1-fold higher BsChe activity than the wild type, using N-methyl-N'-nitro-N-nitrosoguanidine as a mutagen. DNA-sequencing analysis revealed that the strain had lost chromosome 3 (∆Chr3), suggesting that the genes hindering BsChe production may be encoded on Chr3. We also identified common mutations in the functionally unknown BSFP_068720/30 genes in the top 10 active strains generated during transposon mutagenesis. As BSFP_068720/30/40 comprised an operon on Chr3, we created the BSFP_068720/30/40 disruption mutant and confirmed that each disruption mutant containing the expression plasmid exhibited ~ 16.1-fold higher BsChe activity than the wild type. Quantitative PCR showed that each disruption mutant and ΔChr3 had a ~ 9.4-fold higher plasmid copy number than the wild type. Structural prediction models indicate that BSFP_068730/40 is structurally homologous to the structural maintenance of chromosomes (SMC) protein MukBE, which is responsible for chromosome segregation during cell division. Conversely, BSFP_068720/30/40 disruption did not lead to a Chr3 drop-out. These results imply that BSFP_068720/30/40 is not a SMC protein but is involved in destabilizing foreign plasmids to prevent the influx of genetic information from the environment. In conclusion, the disruption of BSFP_068720/30/40 improved plasmid stability and copy number, resulting in exceptionally high BsChe production. KEY POINTS: • Disruption of BSFP_068720/30/40 enabled mass production of Burkholderia Che/Lip. • BSFP_068730/40 is an SMC protein homolog not involved in chromosome retention. • BSFP_068720/30/40 is likely responsible for the exclusion of exogenous plasmids.

Co-Expression of a Thermally Stable and Methanol-Resistant Lipase and Its Chaperone from Burkholderia cepacia G63 in Escherichia coli

Biodiesel biosynthesis with enzymatic transesterification is considered green, sustainable, and environmentally friendly method. Lipase from Burkholderia cepacia G63 has excellent catalytic properties in biodiesel production. Lipase chaperones promote secretion and folding of enzymes, thereby enhancing enzymatic activity. In the current study, heterologous co-expression of lipase (lipA) and chaperone (lipB) was achieved in Escherichia coli through codon optimization. The enzymatic activity of purified and renatured lipAB was 2080.23 ± 19.18 U/g at 50 °C and pH 8.0. Moreover, lipAB showed increased resistance to pH and temperature changes, and lipAB retained stable catalytic properties after treatment with metal ions, organic solvents, and surfactants, namely Mg²⁺, methanol, and Triton-100X. Besides, using recombinant lipase lipAB as catalysts, biodiesel was synthesized using rapeseed oil under 50 °C for 72 h with a yield of 90.23%. Thus, the current study confirmed that co-expression of lipase and its chaperone is an effective strategy to enhance enzyme activity and improve the biochemical profile, meanwhile, showing that lipAB is a promising biocatalyst for biodiesel production.

Co-expression of Pseudomonas alcaligenes lipase and its specific foldase in Pichia pastoris by a dual expression cassette strategy

Lipomax is a commercialized foldase-dependent Pseudomonas lipase that was previously expressed only in Pseudomonas strains. Here, using Pichia pastoris as the host, we report a new co-expression method that leads to the successful production of Lipomax. The active Lipomax is extracellularly co-expressed with its cognate foldase (LIM); and the purified enzyme mix has the optimum pH at pH 8.0 and an optimal temperature around 40 °C. N-glycosylation was observed for Pichia produced Lipomax, and its reduction was shown to increase the lipolytic activity. With different p-nitrophenyl esters as the substrates, the substrate profiling analyses further indicate that Lipomax prefers esters with middle-long chain fatty acids, showing the highest specific activity to p-nitrophenyl caprylate (C8). The extracellular co-expression of Lipomax and LIM in Pichia will not only increase our ability to investigate additional eukaryotic hosts for lipase expression, but also be of considerable value in analyzing other foldase-dependent lipases.

Functional Heterologous Expression of Mature Lipase LipA from Pseudomonas aeruginosa PSA01 in Escherichia coli SHuffle and BL21 (DE3): Effect of the Expression Host on Thermal Stability and Solvent Tolerance of the Enzyme Produced

This study aimed to express heterologously the lipase LipA from Pseudomonas aeruginosa PSA01 obtained from palm fruit residues. In previous approaches, LipA was expressed in Escherichia coli fused with its signal peptide and without its disulfide bond, displaying low activity. We cloned the mature LipA with its truncated chaperone Lif in a dual plasmid and overexpressed the enzyme in two E. coli strains: the traditional BL21 (DE3) and the SHuffle® strain, engineered to produce stable cytoplasmic disulfide bonds. We evaluated the effect of the disulfide bond on LipA stability using molecular dynamics. We expressed LipA successfully under isopropyl β-d-1-thio-galactopyranoside (IPTG) and slow autoinducing conditions. The SHuffle LipA showed higher residual activity at 45 °C and a greater hyperactivation after incubation with ethanol than the enzyme produced by E. coli BL21 (DE3). Conversely, the latter was slightly more stable in methanol 50% and 60% (t½: 49.5 min and 9 min) than the SHuffle LipA (t½: 31.5 min and 7.4 min). The molecular dynamics simulations showed that removing the disulfide bond caused some regions of LipA to become less flexible and some others to become more flexible, significantly affecting the closing lid and partially exposing the active site at all times.

Impact of signal peptide and transmembrane segments on expression and biochemical properties of a lipase from Bacillus sphaericus 205y

A total of 97 amino acids, considered as the signal peptide and transmembrane segments were removed from 205y lipase gene using polymerase chain reaction technique that abolished the low activity of this enzyme. The mature enzyme was expressed in Escherichia coli using pBAD expression vector, which gave up to a 13-fold increase in lipase activity. The mature 205y lipase (without signal peptide and transmembrane; -SP/TM) was purified to homogeneity using the isoelectric focusing technique with 53% recovery. Removing of the signal peptide and transmembrane segments had resulted in the shift of optimal pH, an increase in optimal temperature and tolerance towards more water-miscible organic solvents as compared to the characteristics of open reading frame (ORF) of 205y lipase. Also, in the presence of 1mM inhibitors, less decrease in the activity of mature 205y lipase was observed compared to the ORF of the enzyme. Protein structure modeling showed that 205y lipase consisted of an α/β hydrolase fold without lid domain. However, the transmembrane segment could effect on the enzyme activity by covering the active site or aggregation the protein.

Carbohydrate Structure Database: tools for statistical analysis of bacterial, plant and fungal glycomes

Carbohydrates are biological blocks participating in diverse and crucial processes both at cellular and organism levels. They protect individual cells, establish intracellular interactions, take part in the immune reaction and participate in many other processes. Glycosylation is considered as one of the most important modifications of proteins and other biologically active molecules. Still, the data on the enzymatic machinery involved in the carbohydrate synthesis and processing are scattered, and the advance on its study is hindered by the vast bulk of accumulated genetic information not supported by any experimental evidences for functions of proteins that are encoded by these genes. In this article, we present novel instruments for statistical analysis of glycomes in taxa. These tools may be helpful for investigating carbohydrate-related enzymatic activities in various groups of organisms and for comparison of their carbohydrate content. The instruments are developed on the Carbohydrate Structure Database (CSDB) platform and are available freely on the CSDB web-site at http://csdb.glycoscience.ru.

Database URL: http://csdb.glycoscience.ru

First co-expression of a lipase and its specific foldase obtained by metagenomics

Background

Metagenomics is a useful tool in the search for new lipases that might have characteristics that make them suitable for application in biocatalysis. This paper reports the cloning, co-expression, purification and characterization of a new lipase, denominated LipG9, and its specific foldase, LifG9, from a metagenomic library derived from a fat-contaminated soil.

Results

Within the metagenomic library, the gene lipg9 was cloned jointly with the gene of the foldase, lifg9. LipG9 and LifG9 have 96% and 84% identity, respectively, with the corresponding proteins of Aeromonas veronii B565. LipG9 and LifG9 were co-expressed, both in N-truncated form, in Escherichia coli BL21(DE3), using the vectors pET28a(+) and pT7-7, respectively, and then purified by affinity chromatography using a Ni²⁺ column (HiTrap Chelating HP). The purified enzyme eluted from the column complexed with its foldase. The molecular masses of the N-truncated proteins were 32 kDa for LipG9, including the N-terminal His-tag with 6 residues, and 23 kDa for LifG9, which did not have a His-tag. The biochemical and kinetic characteristics of the purified lipase-foldase preparation were investigated. This preparation was active and stable over a wide range of pH values (6.5-9.5) and temperatures (10-40°C), with the highest specific activity, of 1500 U mg⁻¹, being obtained at pH 7.5 at 30°C. It also had high specific activities against tributyrin, tricaprylin and triolein, with values of 1852, 1566 and 817 U mg⁻¹, respectively. A phylogenetic analysis placed LipG9 in the lipase subfamily I.1. A comparison of the sequence of LipG9 with those of other bacterial lipases in the Protein Data Bank showed that LipG9 contains not only the classic catalytic triad (Ser¹⁰³, Asp²⁵⁰, His²⁷²), with the catalytic Ser occurring within a conserved pentapeptide, Gly-His-Ser-His-Gly, but also a conserved disulfide bridge and a conserved calcium binding site. The homology-modeled structure presents a canonical α/β hydrolase folding type I.

Conclusions

This paper is the first to report the successful co-expression of a lipase and its associated foldase from a metagenomic library. The high activity and stability of Lip-LifG9 suggest that it has a good potential for use in biocatalysis.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-014-0171-7) contains supplementary material, which is available to authorized users.

Autodisplay for the co-expression of lipase and foldase on the surface of E. coli: washing with designer bugs

BACKGROUND

Lipases including the lipase from Burkholderia cepacia are in a main focus in biotechnology research since many years because of their manifold possibilities for application in industrial processes. The application of Burkholderia cepacia lipase for these processes appears complicated because of the need for support by a chaperone, the lipase specific foldase. Purification and reconstitution protocols therefore interfere with an economic implementation of such enzymes in industry. Autodisplay is a convenient method to express a variety of passenger proteins on the surface of E. coli. This method makes subsequent purification steps to obtain the protein of interest unnecessary. If enzymes are used as passengers, the corresponding cells can simply be applied as whole cell biocatalysts. Furthermore, enzymes surface displayed in this manner often acquire stabilization by anchoring within the outer membrane of E. coli.

RESULTS

The lipase and its chaperone foldase from B. cepacia were co-expressed on the surface of E. coli via autodisplay. The whole cell biocatalyst obtained thereby exhibited an enzymatic activity of 2.73 mU mL⁻¹ towards the substrate p-nitrophenyl palmitate when applied in an OD₅₇₈ =1. Outer membrane fractions prepared from the same culture volume showed a lipase activity of 4.01 mU mL⁻¹. The lipase-whole cell biocatalyst as well as outer membrane preparations thereof were used in a standardized laundry test, usually adopted to determine the power of washing agents. In this test, the lipase whole cell biocatalyst and the membrane preparation derived thereof exhibited the same lipolytic activity as the purified lipase from B. cepacia and a lipase preparation which is already applied in commercial washing agents.

CONCLUSIONS

Co-expression of both the lipase and its chaperone foldase on the surface of E. coli yields a lipid degrading whole cell biocatalyst. Therefore the chaperone supported folding process, absolutely required for the lipolytic activity appears not to be hindered by surface display. Furthermore, the cells and the membrane preparations appeared to be stable enough to endure a European standard laundry test and show efficient fat removal properties herein.

Expression and chaperone-assisted refolding of a new cold-active lipase from Psychrobacter cryohalolentis K5(T)

We describe cloning and expression of genes coding for lipase Lip2Pc and lipase-specific foldase LifPc from a psychrotrophic microorganism Psychrobacter cryohalolentis K5(T) isolated from a Siberian cryopeg (the lense of overcooled brine within permafrost). Upon expression in Escherichiacoli Lip2Pc accumulated in inclusion bodies while chaperone was synthesized in a soluble form. An efficient protocol for solubilization and subsequent refolding of the recombinant lipase in the presence of the truncated chaperone was developed. Using this procedure Lip2Pc with specific activity of 6900U/mg was obtained. Contrary to published data on other lipase-chaperone complexes, refolded Lip2Pc was mostly recovered from the complex with chaperone by metal-affinity chromatography. Recombinant Lip2Pc displayed maximum lipolytic activity at 25°C and pH 8.0 with p-nitrophenyl palmitate (C16) as a substrate. Activity assays conducted at different temperatures revealed that the recombinant Lip2Pc is a cold-adapted lipase with ability to utilize substrates with long (C10-C16) hydrocarbon chains in the temperature range from +5 to +65°C. It demonstrated relatively high stability at temperatures above 60°C and in the presence of various metal ions or organic solvents (ethanol, methanol, etc.). Non-ionic detergents, such as Triton X-100 and Tween 20 decreased Lip2Pc activity and SDS completely inhibited it.

Hyper-activation of foldase-dependent lipase with lipase-specific foldase

The LST-03 lipase from Pseudomonas aeruginosa LST-03 requires lipase-specific foldase for activation. Abundant expression of the active lipase was successfully accomplished with individual expression of the lipase and foldase in a heterologous host and subsequent in vitro activation. Although the activity of the native lipase from culture supernatant of P. aeruginosa LST-03 was 110 kI.U./g, that after in vitro activation using individually expressed lipase and foldase was 228 kI.U./g. Furthermore, the activity after in vitro activation with afterwards adding calcium ions was 359 kI.U./g. However, the incubation of the lipase with the foldase in the presence of calcium ions resulted in a small conformational transition and low activation levels of the lipase by the foldase. The lipase showed high affinity for the foldase in the presence of calcium ions. The results indicate that in a cellular environment that contains calcium ions, the lipase would not become a hyperactive form by the foldase.

Characterisation of a thermo-alkali-stable lipase from oil-contaminated soil using a metagenomic approach

Lipases are widely used for a variety of biotechnological applications. Screening these industrial enzymes directly from environmental microorganisms is a more efficient and practical approach than conventional cultivation-dependent methods. Combined with activity-based functional screening, six clones with lipase activity were detected and a gene (termed lipZ01) isolated from a target clone with the highest lipase activity was cloned from an oil-contaminated soil-derived metagenomic library and then sequenced. Gene lipZ01 was expressed in Pichia pastoris GS115 and the molecular weight of the recombinant lipase LipZ01 was estimated by electrophoresis analysis to be approximately 50 kDa. The maximum activity of the purified lipase was 42 U/mL, and the optimum reaction temperature and pH value were 45 °C and 8.0, respectively. The enzyme was highly stable in the temperature range 35-60 °C and under alkaline conditions (pH 7-10). The presence of Ca(2+) and Mn(2+) ions could significantly enhance the activity of the lipase. The purified lipase preferentially hydrolysed triacylglycerols with acyl chain lengths ≥8 carbon atoms, and the conversion degree of biodiesel production was nearly 92% in a transesterification reaction using olive oil and methanol. Some attractive properties suggested that the recombinant lipase may be valuable in industrial applications.

Enhancing functional production of a chaperone-dependent lipase in Escherichia coli using the dual expression cassette plasmid

BACKGROUND

The lipase subfamilies I.1 and I.2 show more than 33% homology in the amino acid sequences and most members share another common property that their genes are clustered with the secondary genes whose protein products are required for folding the lipase into an active conformation and secretion into the culture medium. In previous studies, the lipase (LipA) and its chaperone (LipB) from Ralstonia sp. M1 were overexpressed in E. coli and the lipase was successfully refolded in vitro. The purpose of this study was to enhance the production of the active lipase LipA from Ralstonia sp. M1 in the heterologous host E. coli without in vitro refolding process, using two-plasmid co-expression systems and dual expression cassette plasmid systems.

RESULTS

To produce more active lipase from Ralstonia sp. M1 in E. coli without in vitro refolding process but with the help of overexpression of the chaperone (LipB1 and LipB3 corresponding to 56-aa truncated and 26-aa truncated chaperone LipB), six different expression systems including 2 two-plasmid co-expression systems (E. coli BL21/pELipABa + pELipB1k and BL21/pELipABa + pELipB3k) and 4 dual expression cassette plasmid systems (BL21/pELipAB-LipB1a, BL21/pELipAB-LipB3a, BL21/pELipA-LipB1a, and BL21/pELipA-LipB3a) were constructed. The two-plasmid co-expression systems (E. coli BL21/pELipABa + pELipB1k and BL21/pELipABa + pELipB3k) produced the active lipase at a level of 4 times as high as the single expression cassette plasmid system E. coli BL21/pELipABa did. For the first time, the dual expression cassette plasmid systems BL21/pELipAB-LipB1a and BL21/pELipAB-LipB3a yielded 29- and 19-fold production of the active lipase in comparison with the single expression cassette plasmid system E. coli BL21/pELipABa, respectively. Although the lipase amount was equally expressed in all these expression systems (40% of total cellular protein) and only a small fraction of the overexpressed lipase was folded in vivo into the functional lipase in soluble form whereas the main fraction was still inactive in the form of inclusion bodies. Another controversial finding was that the dual expression cassette plasmid systems E. coli BL21/pELipAB-LipB1a and E. coli/pELipAB-LipB3a secreted the active lipase into the culture medium of 51 and 29 times as high as the single expression cassette plasmid system E. coli pELipABa did, respectively, which has never been reported before. Another interesting finding was that the lipase form LipA6xHis (mature lipase fused with 6× histidine tag) expressed in the dual expression cassette plasmid systems (BL21/pELipA-LipB1a and BL21/pELipA-LipB3a) showed no lipase activity although the expression level of the lipase and two chaperone forms LipB1 and LipB3 in these systems remained as high as that in E. coli BL21/pELipABa + pELipB1k, BL21/pELipABa + pELipB3k, BL21/pELipAB-LipB1a, and BL21/pELipAB-LipB3a. The addition of Neptune oil or detergents into the LB medium increased the lipase production and secretion by up to 94%.

CONCLUSIONS

Our findings demonstrated that a dual expression cassette plasmid system E. coli could overproduce and secrete the active chaperone-dependent lipase (subfamilies I.1 and I.2) in vivo and an improved dual expression cassette plasmid system E. coli could be potentially applied for industrial-scale production of subfamily I.1 and I.2 lipases.

Co-expression of an organic solvent-tolerant lipase and its cognate foldase of Pseudomonas aeruginosa CS-2 and the application of the immobilized recombinant lipase

The genes of CS-2 lipase and its cognate foldase were cloned from Pseudomonas aeruginosa CS-2. A stop codon was not found in the lipase gene. The amino acid sequence deduced from the lipase gene from P. aeruginosa CS-2 showed 97.8%, 71.3%, and 71.2% identity with lipases from P. aeruginosa LST-03, P seudomonas mendocina ymp, and Pseudomonas stutzeri A1501, respectively. The co-expression of CS-2 lipase and its cognate foldase of P. aeruginosa CS-2 in E scherichia coli BL21 (DE3) resulted in the formation of a soluble lipase. The recombinant lipase and foldase were purified to homogeneity using nickel affinity chromatography and about 10.2-fold with 40.9% recovery was achieved for the purification of the recombinant lipase. The molecular masses of the lipase and the foldase were estimated to be 35.7 and 38.3 kDa in SDS-PAGE, respectively. The recombinant lipase showed stability in the presence of some organic solvents. The recombinant CS-2 lipase was immobilized and subsequently used for the synthesis of butyl acetate in heptane. The conversion of substrate decreased from 98.2% to 87.4% after 5 cycles in reuse of the immobilized lipase.

Effects of trehalose and sorbitol on the activity and structure of Pseudomonas cepacia lipase: spectroscopic insight

The stability of enzymes with no reduction in their catalytic activity still remains a critical issue in industrial applications. Naturally occurring osmolytes are commonly used as protein stabilizers. In this study we have investigated the effects of sorbitol and trehalose on the structural stability and activity of Pseudomonas cepacia lipase (PCL), using UV-visible, circular dichroism (CD) and fluorescence spectroscopy. Surface plasmon resonance (SPR) technique was used to trace changes in the refractive index and dielectric constant of the environment. The results revealed that catalytic activity and intrinsic fluorescence intensity of PCL increased in the presence of both osmolytes. Far-UV CD spectra indicated that the protein has undergone some conformational changes upon interacting with these osmolytes. Increasing the concentration of sorbitol led to changes in the refractive index and consequently the dielectric constant of environment; whereas in the case of trehalose, such changes were not significant. Unfavorable interactions of trehalose with protein surface induced higher preferential exclusion from the enzyme-water interface than that of sorbitol. Results of this report could give further insights about the stabilization mechanism of osmolytes.

A lipase with broad temperature range from an alkaliphilic gamma-proteobacterium isolated in Greenland

A gamma-proteobacterium related to the genera Alteromonadales and Pseudomonadales, isolated from a cold and alkaline environment in Greenland, has been shown to produce a lipase active between 5 degrees C and 80 degrees C, with optimal activity at 55 degrees C and pH 8. PCR-based screening of genomic DNA from the isolated bacterium, followed by genome walking, resulted in two complete open reading frames, which were predicted to encode a lipase and its helper protein, a lipase foldase. The amino acid sequence derived for the lipase showed resemblance to lipases from Pseudomonas, Rhodoferax, Aeromonas and Vibrio. The two genes were cloned into different expression systems in E. coli with or without a putative secretion sequence, but despite the fact that both recombinant lipase and lipase foldase were observed on SDS-PAGE, no recombinant lipase activity was detected. Attempts to refold the recombinant lipase in vitro using a purified lipase foldase remained unsuccessful.

Co-expression of the lipase and foldase of Pseudomonas aeruginosa to a functional lipase in Escherichia coli

The lipA gene, a structural gene encoding for protein of molecular mass 48 kDa, and lipB gene, encoding for a lipase-specific chaperone with molecular mass of 35 kDa, of Pseudomonas aeruginosa B2264 were co-expressed in heterologous host Escherichia coli BL21 (DE3) to obtain in vivo expression of functional lipase. The recombinant lipase was expressed with histidine tag at its N terminus and was purified to homogeneity using nickel affinity chromatography. The amino acid sequence of LipA and LipB of P. aeruginosa B2264 was 99-100% identical with the corresponding sequence of LipA and LipB of P. aeruginosa LST-03 and P. aeruginosa PA01, but it has less identity with Pseudomonas cepacia (Burkholderia cepacia) as it showed only 37.6% and 23.3% identity with the B. cepacia LipA and LipB sequence, respectively. The molecular mass of the recombinant lipase was found to be 48 kDa. The recombinant lipase exhibited optimal activity at pH 8.0 and 37 degrees C, though it was active between pH 5.0 and pH 9.0 and up to 45 degrees C. K (m) and V (max) values for recombinant P. aeruginosa lipase were found to be 151.5 +/- 29 microM and 217 +/- 22.5 micromol min(-1) mg(-1) protein, respectively.

Components of the E. coli envelope are affected by and can react to protein over-production in the cytoplasm

Background

Protein over-expression in bacteria is still the easiest, cheapest and therefore preferred way to obtain large amounts of proteins for industrial and laboratory scale preparations. Several studies emphasized the importance of understanding cellular and molecular mechanisms triggered by protein over-production in order to obtain higher yield and better quality of the recombinant product. Almost every step leading to a fully functional polypeptide has been investigated, from mRNA stability to the role of molecular chaperones, from aggregation to bottlenecks in the secretory pathway. In this context, we focused on the still poorly addressed relationship between protein production in the cytoplasm and the bacterial envelope, an active and reactive cell compartment that controls interactions with the environment and several major cellular processes. Results available to date show that the accumulation of foreign proteins in the cytoplasm induces changes in the membrane lipids and in the levels of mRNAs for some membrane proteins. However, a direct connection between membrane protein expression levels and soluble/aggregated protein accumulation in the cytoplasm has never been reported.

Results

By the use of a combined physiological and proteomic approach, we investigated the effects on the cell membrane of E. coli of the overexpression of two recombinant proteins, the B. cepacia lipase (BCL) and the green fluorescent protein (GFP). Both polypeptides are expressed in the cytoplasm at similar levels but GFP is fully soluble whereas inactive BCL accumulates in inclusion bodies.

Growth and viability of the transformed cells were tested in the presence of different drugs. We found that chloramphenycol preferentially inhibited the strain over-producing GFP while SDS was more effective when BCL inclusion bodies accumulated in the cytoplasm. In contrast, both proteins induced a similar response in the membrane proteome, i.e. increased levels of LamB, OmpF, OmpA and TolC. Under all tested conditions, the lipopolysaccharide was not affected, suggesting that a specific rather than a generalized rearrangement of the envelope was induced.

Conclusion

Taking together physiological and biochemical evidence, our work indicates that the E. coli envelope can sense protein over-expression in the cytoplasm and react by modulating the abundance of some membrane proteins, with possible consequences on the membrane traffic of small solutes, i.e. nutrients, drugs and metabolites. Such a response seems to be independent on the nature of the protein being over-expressed. On the other hand both our data reported herein and previous results indicate that membrane lipids may act as a second stress sensor responsive to the aggregation state of the recombinant protein and further contribute to changes in cellular exchanges with the environment.

Cloning and expression of Pseudomonas fluorescens 26-2 lipase gene in Pichia pastoris and characterizing for transesterification

Pseudomonas lipases are important biocatalysts widely used in a variety of industrial fields. An extracellular lipase gene lipA with 1,854-bp open reading frame was cloned from Pseudomonas fluorescens 26-2. The multialignment assay of the putative amino acid and the secondary structure prediction revealed this enzyme could be classified into the lipolytic subfamily I.3 and secreted via adenosine-triphosphate-binding cassette pathway. The lipA gene was integrated into Pichia pastoris GS115, and the methanol-inducible recombinants with Mut(S) and Mut(+) phenotypes were acquired. The characteristics and the transesterification capacity shown by this enzyme suggested it is a useful biocatalyst for biodiesel preparation.

Small-scale production of Burkholderia cepacia ATCC21808 lipase adapted to high-throughput screening

The screening of variant libraries of recombinant Burkholderia cepacia ATCC21808 lipase generated in Escherichia coli is limited by expression difficulties that are mainly due to the formation of inclusion bodies. To circumvent these difficulties and provide an efficient small-scale screening protocol, the gene encoding the lipase from B. cepacia was expressed in various expression vectors. With the pFLAG-ATS-Lip-Hp construct, expression of up to 6807 U/L of culture was possible in Erlenmeyer flasks. The production protocol was miniaturized in 96 deep-well plates, yielding 1300 U/L of lipase in fusion with the FLAG tag. With this protocol, the activity was determined in less than 10 min for a full plate, with a coefficient of variance of about 25%. For validation, 18 mutants constructed by site-directed mutagenesis on position Valine 266 were screened. Nice variations of activity were detected and found to be in agreement with those obtained in Erlenmeyer flask cultures. The protocol enabled the identification of 5 mutants showing enhanced activity toward para-nitrophenyl butyrate.

Cloning and expression of gene, and activation of an organic solvent-stable lipase from Pseudomonas aeruginosa LST-03

Organic solvent-tolerant Pseudomonas aeruginosa LST-03 secretes an organic solvent-stable lipase, LST-03 lipase. The gene of the LST-03 lipase (Lip9) and the gene of the lipase-specific foldase (Lif9) were cloned and expressed in Escherichia coli. In the cloned 2.6 kbps DNA fragment, two open reading frames, Lip9 consisting of 933 nucleotides which encoded 311 amino acids and Lif9 consisting of 1,020 nucleotides which encoded 340 amino acids, were found. The overexpression of the lipase gene (lip9) was achieved when T7 promoter was used and the signal peptide of the lipase was deleted. The expressed amount of the lipase was greatly increased and overexpressed lipase formed inclusion body in E. coli cell. The collected inclusion body of the lipase from the cell was easily solubilized by urea and activated by using lipase-specific foldase of which 52 or 58 amino acids of N-terminal were deleted. Especially, the N-terminal methionine of the lipase of which the signal peptide was deleted was released in E. coli and the amino acid sequence was in agreement with that of the originally-produced lipase by P. aeruginosa LST-03. Furthermore, the overexpressed and solubilized lipase of which the signal peptide was deleted was more effectively activated by lipase-specific foldase.

Functional Cell-Surface Display of a Lipase-Specific Chaperone

Lipases are important enzymes in biotechnology. Extracellular bacterial lipases from Pseudomonads and related species require the assistance of specific chaperones, designated "Lif" proteins (lipase specific foldases). Lifs, a unique family of steric chaperones, are anchored to the periplasmic side of the inner membrane where they convert lipases into their active conformation. We have previously shown that the autotransporter protein EstA from P. aeruginosa can be used to direct a variety of proteins to the cell surface of Escherichia coli. Here we demonstrate for the first time the functional cell-surface display of the Lif chaperone and FACS (fluorescence-activated cell sorting)-based analysis of bacterial cells that carried foldase-lipase complexes. The model Lif protein, LipH from P. aeruginosa, was displayed at the surface of E. coli cells. Surface exposed LipH was functional and efficiently refolded chemically denatured lipase. The foldase autodisplay system reported here can be used for a variety of applications including the ultrahigh-throughput screening of large libraries of foldase variants generated by directed evolution.

Improved expression and purification of the correctly folded response regulator PlnC from lactobacilli

The response regulator PlnC is part of the signal transduction system that plays a key role in the regulation of bacteriocin production in Lactobacillus plantarum C11. In this study, we wanted to express high levels of the response regulator PlnC in a soluble and native form for purification and further studies. The protein was expressed as a fusion protein (fPlnC) containing an N-terminal Flag-tag to facilitate detection and purification. When the fusion gene, fplnC, was expressed in Escherichia coli BL21, nearly all (99%) of the recombinant protein ended up inside inclusion bodies as an incorrectly folded protein. By utilizing two different Gram-positive expression systems (SIP and NICE) in L. plantarum NC8 and Lactobacillus sakei Lb790, the expression of the soluble fPlnC was significantly increased, being 20-40 times more than that in E. coli BL21. Using the N-terminal tag, the expressed protein was purified by immunoprecipitation. By DNA-binding study (EMSA), we demonstrated that the fusion protein purified from the soluble pool was correctly folded as judged by its ability to bind specifically on regulated promoters. Using our approach, we estimate that about 1 mg of fPlnC can be purified from 11 of the bacterial culture.

Alginate-chaperoned facile refolding of Chromobacterium viscosum lipase

Urea denatured lipase from Chromobacterium viscosum lipase could be refolded by addition of alginate with high guluronic acid content. The refolded molecule could be recovered by affinity precipitation. This approach resulted in recovery of 80% (of original activity) as compared to classical dilution method which gave only 21% activity recovery. Dynamic light scattering showed that binding required about 45 min and activity data obtained from affinity precipitation experiments indicated that refolding was almost instantaneous after binding. Circular dichroism (CD) and fluorescence data showed that refolded molecule was identical to the native molecule. It also showed that refolding takes place at the binding stage and not at the precipitation stage. Preliminary studies showed that the refolding strategy worked equally well with lipases from wheat germ and porcine pancreas.

Purification, characterization, and molecular cloning of organic-solvent-tolerant cholesterol esterase from cyclohexane-tolerant Burkholderia cepacia strain ST-200

Extracellular cholesterol esterase of Burkholderia cepacia strain ST-200 was purified from the culture supernatant. Its molecular mass was 37 kDa. The enzyme was stable at pH 5.5-12 and active at pH 5.5-6, showing optimal activity at pH 7.0 at 45 degrees C. Relative to the commercially available cholesterol esterases, the purified enzyme was highly stable in the presence of various water-miscible organic solvents. The enzyme preferentially hydrolyzed long-chain fatty acid esters of cholesterol, except for that of cholesteryl palmitate. The enzyme exhibited lipolytic activity toward various p-nitrophenyl esters. The hydrolysis rate of p-nitrophenyl caprylate was enhanced 3.5- to 7.2-fold in the presence of 5-20% (vol/vol) water-miscible organic solvents relative to that in the absence of organic solvents. The structural gene encoding the cholesterol esterase was cloned and sequenced. The primary translation product was predicted to be 365 amino acid residues. The mature product is composed of 325 amino acid residues. The amino acid sequence of the product showed the highest similarity to the lipase LipA (87%) from B. cepacia DSM3959.

High-level heterologous expression and properties of a novel lipase from Ralstonia sp. M1

The mature lipase LipA and its 56aa-truncated chaperone DeltaLipBhis (with 6xhis-tag) from Ralstonia sp. M1 were over-expressed in Escherichia coli BL21 under the control of T7 promoter with a high level of 70 and 12mg protein per gram of wet cells, respectively. The simply purified lipase LipA was effectively refolded by Ni-NTA purified chaperone DeltaLipBhis in molar ratio 1:1 at 4 degrees C for 24 hours in H2O. The in vitro refolded lipase LipA had an optimal activity in the temperature range of 50-55 degrees C and was stable up to 45 degrees C with more than 84% activity retention. The maximal activity was observed at pH 10.75 for hydrolysis of olive oil and found to be stable over alkaline pH range 8.0-10.5 with more than 52% activity retention. The enzyme was found to be highly resistant to many organic solvents especially induced by ethanolamine (remaining activity 137-334%), but inhibited by 1-butanol and acetonitrile (40-86%). Metal ions Cu2+, Sn2+, Mn2+, Mg2+, and Ca2+ stimulated the lipase slightly with increase in activity by up to 22%, whereas Zn2+ significantly inhibited the enzyme with the residual activity of 30-65% and Fe3+ to a lesser degree (activity retention of 77-86%). Tween 80, Tween 60, and Tween 40 induced the activation of the lipase LipA (222-330%) and 0.2-1% (w/v) of Triton X-100, X-45, and SDS increased the lipase activity by up to 52%. However, 5% (w/v) of Triton X-100, X-45, and SDS inhibited strongly the activity by 31-89%. The inhibitors including DEPC, EDTA, PMSF, and 2-mercaptoethanol (0.1-10mM) inhibited moderately the lipase with remaining activity of 57-105%. The lipase LipA hydrolyzed a wide range of triglycerides, but preferentially short length acyl chains (C4 and C6). In contrast to the triglycerides, medium length acyl chains (C8 and C14) of p-nitrophenyl (p-NP) esters were preferential substrates of this lipase. The enzyme preferentially catalyzed the hydrolysis of cottonseed oil (317%), cornoil (227%), palm oil (222%), and wheatgerm oil (210%) in comparison to olive oil (100%).

Rational control of enantioselectivity of lipase by site-directed mutagenesis based on the mechanism

The enantioselectivity of a Burkholderia cepacia lipase toward secondary alcohols could be both increased and decreased rationally by introducing only a single mutation on the basis of the mechanism proposed previously.

A novel lipase/chaperone pair from Ralstonia sp. M1: analysis of the folding interaction and evidence for gene loss in R. solanacearum

A microbial strain (referred to as M1) that produces an extracellular lipase was isolated from a soil sample in Vietnam, and identified as a Ralstonia species by partial sequencing of its 16S rDNA. A genomic library was constructed from Pst I fragments, and a colony showing lipase activity was selected for further analysis. Sequencing of the 4.7-kb insert in this clone (named M1-72) revealed one incomplete and three complete ORFs, predicted to encode a partial hypothetical glutaminyl tRNA synthetase (304 aa), a hypothetical transmembrane protein (500 aa), a lipase (328 aa) and a lipase chaperone (352 aa), respectively. Alignment of the insert sequence with the corresponding region of the genome of R. solanacearum GMI1000 (GenBank Accession No. AL646081) confirmed the presence in the latter of the genes for the hypothetical transmembrane protein and glutaminyl tRNA synthetase, which exhibited 89-91% identity to their counterparts in M1. However, R. solanacearum GMI1000 lacks the complete lipase-encoding gene and the major part of the chaperone-encoding gene, creating a so-called "black hole". The deduced amino acid sequences of the products of the lipase gene lipA and chaperone gene lipB from strain M1 shared 49.3-60.3% and 23.9-32.7% identity, respectively, with those of the Burkholderia lipase/chaperone subfamily I.2. lipB is located downstream of lipA, and separated from it by only 9 bp, and each gene has a putative ribosome binding site. The mature lipase LipA, a His-tagged derivative (LipAhis), the tagged full-length chaperone LipBhis and a truncated form (DeltaLipBhis) lacking the 56 N-terminal residues were expressed in Escherichia coli BL21. LipA, LipAhis and DeltaLipBhis could be expressed at high levels (70, 15 and 12 mg/g wet cells, respectively) and were easily purified. However, LipBhis was expressed at a much lower level which precluded purification. The specific activity of purified LipAhis, expressed on its own, was very low (<52 U/mg). However, after co-incubation with the purified DeltaLipBhis in vitro, the specific activity of the enzyme was markedly enhanced, indicating that the chaperone facilitated correct folding of the enzyme. A lipase:chaperone ratio of 1:10 was found to be optimal, yielding an enzyme preparation with a specific activity of 650 U/mg.

Expression and characterization of a novel enantioselective lipase from Acinetobacter species SY-01

A novel lipase gene, lipase A, of Acinetobacter species SY-01 (A. species SY-01) was cloned, sequenced, and expressed in Bacillus subtilis 168. The deduced amino acid (aa) sequences for the lipase A and its chaperone, lipase-specific chaperone, were found to encode mature proteins of 339 aa (37.2 kDa) and 347 aa (38.1 kDa), respectively. The aa sequence of lipase A and lipase-specific chaperone shared high homology 82 and 67% identity with the lipase A and the lipase B of A. species RAG-1. This new lipase was defined as a group I Proteobacterial lipase family. The expressed lipase A was purified through sequential treatment with Q-Sepharose, Resource Q, and Superdex-S75 columns. The maximal activity was observed at 50 degrees C for hydrolysis of p-nitrophenyl monoesters and found to be stable at pH 9-11, with optimal activity at pH 10. Lipase A hydrolyzed wide range of fatty acid esters of p-nitrophenyl, but preferentially hydrolyzed short length acyl chains (C2 and C4). Moreover, lipase A from A. species SY-01 catalyzed hydrolysis of the two acetate isomers of cis-(+/-)-2-(bromomethyl)-2-(2,4-dichloro phenyl)-1,3-dioxolane-4-methyl acetate, an intermediate required for the synthesis of Itraconazole which was an anti-fungal drug, at different rate and yielded cis-(-)-isomer in 81.5% conversion with 91.9% enantiomeric excess.

The cold-active lipase of Pseudomonas fragi. Heterologous expression, biochemical characterization and molecular modeling

A recombinant lipase cloned from Pseudomonas fragi strain IFO 3458 (PFL) was found to retain significant activity at low temperature. In an attempt to elucidate the structural basis of this behaviour, a model of its three-dimensional structure was built by homology and compared with homologous mesophilic lipases, i.e. the Pseudomonas aeruginosa lipase (45% sequence identity) and Burkholderia cepacia lipase (38%). In this model, features common to all known lipases have been identified, such as the catalytic triad (S83, D238 and H260) and the oxyanion hole (L17, Q84). Structural modifications recurrent in cold-adaptation, i.e. a large amount of charged residues exposed at the protein surface, have been detected. Noteworthy is the lack of a disulphide bridge conserved in homologous Pseudomonas lipases that may contribute to increased conformational flexibility of the cold-active enzyme.