Effect of glycosaminoglycan degradation on lung tissue viscoelasticity

Mucopolysaccharidosis (MPS IIIA) mice have increased lung compliance and airway resistance, decreased diaphragm strength, and no change in alveolar structure

Mucopolysaccharidosis type IIIA (MPS IIIA) is characterized by neurological and skeletal pathologies caused by reduced activity of the lysosomal hydrolase, sulfamidase, and the subsequent primary accumulation of undegraded heparan sulfate (HS). Respiratory pathology is considered secondary in MPS IIIA and the mechanisms are not well understood. Changes in the amount, metabolism, and function of pulmonary surfactant, the substance that regulates alveolar interfacial surface tension and modulates lung compliance and elastance, have been reported in MPS IIIA mice. Here we investigated changes in lung function in 20-wk-old control and MPS IIIA mice with a closed and open thoracic cage, diaphragm contractile properties, and potential parenchymal remodeling. MPS IIIA mice had increased compliance and airway resistance and reduced tissue damping and elastance compared with control mice. The chest wall impacted lung function as observed by an increase in airway resistance and a decrease in peripheral energy dissipation in the open compared with the closed thoracic cage state in MPS IIIA mice. Diaphragm contractile forces showed a decrease in peak twitch force, maximum specific force, and the force-frequency relationship but no change in muscle fiber cross-sectional area in MPS IIIA mice compared with control mice. Design-based stereology did not reveal any parenchymal remodeling or destruction of alveolar septa in the MPS IIIA mouse lung. In conclusion, the increased storage of HS which leads to biochemical and biophysical changes in pulmonary surfactant also affects lung and diaphragm function, but has no impact on lung or diaphragm structure at this stage of the disease.NEW & NOTEWORTHY Heparan sulfate storage in the lungs of mucopolysaccharidosis type IIIA (MPS IIIA) mice leads to changes in lung function consistent with those of an obstructive lung disease and includes an increase in lung compliance and airway resistance and a decrease in tissue elastance. In addition, diaphragm muscle contractile strength is reduced, potentially further contributing to lung function impairment. However, no changes in parenchymal lung structure were observed in mice at 20 wk of age.

Effects of mechanical ventilation on the interstitial extracellular matrix in healthy lungs and lungs affected by acute respiratory distress syndrome: a narrative review

BACKGROUND

Mechanical ventilation, a lifesaving intervention in critical care, can lead to damage in the extracellular matrix (ECM), triggering inflammation and ventilator-induced lung injury (VILI), particularly in conditions such as acute respiratory distress syndrome (ARDS). This review discusses the detailed structure of the ECM in healthy and ARDS-affected lungs under mechanical ventilation, aiming to bridge the gap between experimental insights and clinical practice by offering a thorough understanding of lung ECM organization and the dynamics of its alteration during mechanical ventilation.

MAIN TEXT

Focusing on the clinical implications, we explore the potential of precise interventions targeting the ECM and cellular signaling pathways to mitigate lung damage, reduce inflammation, and ultimately improve outcomes for critically ill patients. By analyzing a range of experimental studies and clinical papers, particular attention is paid to the roles of matrix metalloproteinases (MMPs), integrins, and other molecules in ECM damage and VILI. This synthesis not only sheds light on the structural changes induced by mechanical stress but also underscores the importance of cellular responses such as inflammation, fibrosis, and excessive activation of MMPs.

CONCLUSIONS

This review emphasizes the significance of mechanical cues transduced by integrins and their impact on cellular behavior during ventilation, offering insights into the complex interactions between mechanical ventilation, ECM damage, and cellular signaling. By understanding these mechanisms, healthcare professionals in critical care can anticipate the consequences of mechanical ventilation and use targeted strategies to prevent or minimize ECM damage, ultimately leading to better patient management and outcomes in critical care settings.

Mechanotransduction and the extracellular matrix: Key drivers of lung pathologies and drug responsiveness

The lung is a biomechanically active organ, with multiscale mechanical forces impacting the organ, tissue and cellular responses within this microenvironment. In chronic lung diseases, such as chronic obstructive pulmonary disease, pulmonary fibrosis and others, the structure of the lung is drastically altered impeding gas exchange. These changes are, in part, reflected in alterations in the composition, amount and organization of the extracellular matrix within the different lung compartments. The transmission of mechanical forces within lung tissue are broadcast by this complex mix of extracellular matrix components, in particular the collagens, elastin and proteoglycans and the crosslinking of these components. At both a macro and a micro level, the mechanical properties of the microenvironment have a key regulatory role in ascertaining cellular responses and the function of the lung. Cells adhere to, and receive signals from, the extracellular matrix through a number of different surface receptors and complexes which are important for mechanotransduction. This review summarizes the multiscale mechanics in the lung and how the mechanical environment changes in lung disease and aging. We then examine the role of mechanotransduction in driving cell signaling events in lung diseases and finish with a future perspective of the need to consider how such forces may impact pharmacological responsiveness in lung diseases.

The interplay of cells, polymers, and vascularization in three-dimensional lung models and their applications in COVID-19 research and therapy

Millions of people have been affected ever since the emergence of the corona virus disease of 2019 (COVID-19) outbreak, leading to an urgent need for antiviral drug and vaccine development. Current experimentation on traditional two-dimensional culture (2D) fails to accurately mimic the in vivo microenvironment for the disease, while in vivo animal model testing does not faithfully replicate human COVID-19 infection. Human-based three-dimensional (3D) cell culture models such as spheroids, organoids, and organ-on-a-chip present a promising solution to these challenges. In this report, we review the recent 3D in vitro lung models used in COVID-19 infection and drug screening studies and highlight the most common types of natural and synthetic polymers used to generate 3D lung models.

Biaxial mechanical properties of the bronchial tree: Characterization of elasticity, extensibility, and energetics, including the effect of strain rate and preconditioning

Distal airways commonly obstruct in lung disease and despite their importance, their mechanical properties are vastly underexplored. The lack of bronchial experiments restricts current airway models to either assume rigid structures, or extrapolate the material properties of the trachea to represent the small airways. Furthermore, past works are exclusively limited to uniaxial testing; investigating the multidirectional tensile loads of both the proximal and distal pulmonary airways is long overdue. Here we present comprehensive mechanical and viscoelastic properties of the porcine airway tree, including the trachea, trachealis muscle, large bronchi, and small bronchi, via measures of elasticity, extensibility, and energetics to explore regional and directional dependencies, cross-examining strain rate and preconditioning effects using planar equibiaxial tensile tests for the first time. We find bronchial regions are notably heterogeneous, where the trachea exhibits greater stiffness, energy loss, and preconditioning sensitivity than the smaller airways. Interestingly, the trachealis muscle is similar to the distal bronchi, despite being anatomically located adjacent to the proximal ring. Tissues are anisotropic and axially stiffer under initial loading, losing more energy with greater stress relaxation circumferentially. Strain rate dependency is also noted, where tissues are more energetically efficient at the faster strain rate, likely attributable to the microstructure. Findings highlight assumptions of homogeneity and isotropy are inadequate, and enable the improvement of aerosol flow and dynamic airway deformation computational predictive models. These results provide much needed fundamental material properties for future explorations contrasting healthy versus diseased pulmonary airway mechanics to better understand the relationship between structure and lung function. STATEMENT OF SIGNIFICANCE: We present comprehensive multiaxial mechanical tensile experiments of the proximal and distal airways via measures of maximum stress, initial and ultimate moduli, strain and stress transitions, hysteresis, energy loss, and stress relaxation, and further assess preconditioning and strain rate dependencies to examine the relationship between lung function and structure. The mechanical response of the bronchial tree demonstrates significant anisotropy and heterogeneity, even within the tracheal ring, and emphasizes that contrary to past studies, the behavior of the proximal airways cannot be extended to distal bronchial tree analyses. Establishing these material properties is critical to advancing our understanding of airway function and in developing accurate computational simulations to help diagnose and monitor pulmonary diseases.

Tissue mechanics coevolves with fibrillar matrisomes in healthy and fibrotic tissues

Fibrillar proteins are principal components of extracellular matrix (ECM) that confer mechanical properties to tissues. Fibrosis can result from wound repair in nearly every tissue in adults, and it associates with increased ECM density and crosslinking as well as increased tissue stiffness. Such fibrotic tissues are a major biomedical challenge, and an emerging view posits that the altered mechanical environment supports both synthetic and contractile myofibroblasts in a state of persistent activation. Here, we review the matrisome in several fibrotic diseases, as well as normal tissues, with a focus on physicochemical properties. Stiffness generally increases with the abundance of fibrillar collagens, the major constituent of ECM, with similar mathematical trends for fibrosis as well as adult tissues from soft brain to stiff bone and heart development. Changes in expression of other core matrisome and matrisome-associated proteins or proteoglycans contribute to tissue stiffening in fibrosis by organizing collagen, crosslinking ECM, and facilitating adhesion of myofibroblasts. Understanding how ECM composition and mechanics coevolve during fibrosis can lead to better models and help with antifibrotic therapies.

Remodeling of the Aged and Emphysematous Lungs: Roles of Microenvironmental Cues

Aging is a slow process that affects all organs, and the lung is no exception. At the alveolar level, aging increases the airspace size with thicker and stiffer septal walls and straighter and thickened collagen and elastic fibers. This creates a microenvironment that interferes with the ability of cells in the parenchyma to maintain normal homeostasis and respond to injury. These changes also make the lung more susceptible to disease such as emphysema. Emphysema is characterized by slow but progressive remodeling of the deep alveolar regions that leads to airspace enlargement and increased but disorganized elastin and collagen deposition. This remodeling has been attributed to ongoing inflammation that involves inflammatory cells and the cytokines they produce. Cellular senescence, another consequence of aging, weakens the ability of cells to properly respond to injury, something that also occurs in emphysema. These factors conspire to make alveolar walls more prone to mechanical failure, which can set emphysema in motion by driving inflammation through immune stimulation by protein fragments. Both aging and emphysema are influenced by microenvironmental conditions such as local inflammation, chemical makeup, tissue stiffness, and mechanical stresses. Although aging and emphysema are not equivalent, they have the potential to influence each other in synergistic ways; aging sets up the conditions for emphysema to develop, while emphysema may accelerate cellular senescence and thus aging itself. This article focuses on the similarities and differences between the remodeled microenvironment of the aging and emphysematous lung, with special emphasis on the alveolar septal wall. © 2022 American Physiological Society. Compr Physiol 12:3559-3574, 2022.

Baseline Stiffness Modulates the Non-Linear Response to Stretch of the Extracellular Matrix in Pulmonary Fibrosis

Pulmonary fibrosis (PF) is a progressive disease that disrupts the mechanical homeostasis of the lung extracellular matrix (ECM). These effects are particularly relevant in the lung context, given the dynamic nature of cyclic stretch that the ECM is continuously subjected to during breathing. This work uses an in vivo model of pulmonary fibrosis to characterize the macro- and micromechanical properties of lung ECM subjected to stretch. To that aim, we have compared the micromechanical properties of fibrotic ECM in baseline and under stretch conditions, using a novel combination of Atomic Force Microscopy (AFM) and a stretchable membrane-based chip. At the macroscale, fibrotic ECM displayed strain-hardening, with a stiffness one order of magnitude higher than its healthy counterpart. Conversely, at the microscale, we found a switch in the stretch-induced mechanical behaviour of the lung ECM from strain-hardening at physiological ECM stiffnesses to strain-softening at fibrotic ECM stiffnesses. Similarly, we observed solidification of healthy ECM versus fluidization of fibrotic ECM in response to stretch. Our results suggest that the mechanical behaviour of fibrotic ECM under stretch involves a potential built-in mechanotransduction mechanism that may slow down the progression of PF by steering resident fibroblasts away from a pro-fibrotic profile.

Architecture and Composition Dictate Viscoelastic Properties of Organ-Derived Extracellular Matrix Hydrogels

The proteins and polysaccharides of the extracellular matrix (ECM) provide architectural support as well as biochemical and biophysical instruction to cells. Decellularized, ECM hydrogels replicate in vivo functions. The ECM’s elasticity and water retention renders it viscoelastic. In this study, we compared the viscoelastic properties of ECM hydrogels derived from the skin, lung and (cardiac) left ventricle and mathematically modelled these data with a generalized Maxwell model. ECM hydrogels from the skin, lung and cardiac left ventricle (LV) were subjected to a stress relaxation test under uniaxial low-load compression at a 20%/s strain rate and the viscoelasticity determined. Stress relaxation data were modelled according to Maxwell. Physical data were compared with protein and sulfated GAGs composition and ultrastructure SEM. We show that the skin-ECM relaxed faster and had a lower elastic modulus than the lung-ECM and the LV-ECM. The skin-ECM had two Maxwell elements, the lung-ECM and the LV-ECM had three. The skin-ECM had a higher number of sulfated GAGs, and a highly porous surface, while both the LV-ECM and the lung-ECM had homogenous surfaces with localized porous regions. Our results show that the elasticity of ECM hydrogels, but also their viscoelastic relaxation and gelling behavior, was organ dependent. Part of these physical features correlated with their biochemical composition and ultrastructure.

Tensile Viscoelastic Properties of the Sclera after Glycosaminoglycan Depletion

PURPOSE

Fibrillar collagen network and glycosaminoglycans (GAGs) are the primary components of extracellular matrix (ECM) of the sclera. The main goal of this study was to investigate the possible structural roles of GAGs in the scleral tensile properties as a function of preconditioning and displacement rate.

METHODS

Four-step uniaxial stress-relaxation tests were used for characterizing the viscoelastic tensile response of the posterior porcine sclera with and without enzymatic GAG removal. The scleral strips were divided into different groups based on the displacement rate and the presence or absence of a preconditioning step in the loading protocol. The groups were (1) displacement rate of 0.2 mm/min without preconditioning, (2) displacement rate of 1 mm/min without preconditioning, (3) displacement rate of 0.2 mm/min with preconditioning, and (4) displacement rate of 1 mm/min with preconditioning. The peak stress, equilibrium stress, and the equilibrium elastic modulus were calculated for all specimens and compared against each other.

RESULTS

Increasing the displacement rate from 0.2 mm/min to 1.0 mm/min was found to cause an insignificant change in the equilibrium stress and equilibrium elastic modulus of porcine scleral strips. Removal of GAGs resulted in an overall stiffer tensile behavior independent of the displacement rate in samples that were not preconditioned (P < .05). The behavior of preconditioned samples with and without GAG removal was not significantly different from each other.

CONCLUSIONS

The experimental measurements of the present study showed that GAGs play an important role in the mechanical properties of the posterior porcine sclera. Furthermore, using a preconditioning step in the uniaxial testing protocol resulted in not being able to identify any significant difference in the tensile behavior of GAG depleted and normal scleral strips.

Integrative Computational Models of Lung Structure-Function Interactions

Anatomically based integrative models of the lung and their interaction with other key components of the respiratory system provide unique capabilities for investigating both normal and abnormal lung function. There is substantial regional variability in both structure and function within the normal lung, yet it remains capable of relatively efficient gas exchange by providing close matching of air delivery (ventilation) and blood delivery (perfusion) to regions of gas exchange tissue from the scale of the whole organ to the smallest continuous gas exchange units. This is despite remarkably different mechanisms of air and blood delivery, different fluid properties, and unique scale-dependent anatomical structures through which the blood and air are transported. This inherent heterogeneity can be exacerbated in the presence of disease or when the body is under stress. Current computational power and data availability allow for the construction of sophisticated data-driven integrative models that can mimic respiratory system structure, function, and response to intervention. Computational models do not have the same technical and ethical issues that can limit experimental studies and biomedical imaging, and if they are solidly grounded in physiology and physics they facilitate investigation of the underlying interaction between mechanisms that determine respiratory function and dysfunction, and to estimate otherwise difficult-to-access measures. © 2021 American Physiological Society. Compr Physiol 11:1501-1530, 2021.

A viscoelastic two-dimensional network model of the lung extracellular matrix

The extracellular matrix (ECM) comprises a large proportion of the lung parenchymal tissue and is an important contributor to the mechanical properties of the lung. The lung tissue is a biologically active scaffold with a complex ECM matrix structure and composition that provides physical support to the surrounding cells. Nearly all respiratory pathologies result in changes in the structure and composition of the ECM; however, the impact of these alterations on the mechanical properties of the tissue is not well understood. In this study, a novel network model was developed to incorporate the combinatorial effect of lung tissue ECM constituents such as collagen, elastin and proteoglycans (PGs) and used to mimic the experimentally derived length-tension response of the tissue to uniaxial loading. By modelling the effect of collagen elasticity as an exponential function with strain, and in concert with the linear elastic response of elastin, the network model's mechanical response matched experimental stress-strain curves from the literature. In addition, by incorporating spring-dashpot viscoelastic elements, to represent the PGs, the hysteresis response was also simulated. Finally, by selectively reducing volume fractions of the different ECM constituents, we were able to gain insight into their relative mechanical contribution to the larger scale tissue mechanical response.

Characterizing the viscoelasticity of extra- and intra-parenchymal lung bronchi

Pulmonary disease is known to cause remodeling of tissue structure, resulting in altered viscoelastic properties; yet the foundation for understanding this phenomenon is still nascent and will enable scientific insights regarding lung functionality. In order to characterize the viscoelastic response of pulmonary airways, uniaxial tensile experiments are conducted on porcine extra- and intra-parenchymal bronchial regions, measuring both axially and circumferentially oriented tissue. Anisotropic and heterogeneous effects on preconditioning and hysteresis are substantial, linking to energy dissipation expectancies. Stress relaxation is rheologically modeled using several classical configurations of discrete spring and dashpot elements; among them, Standard Linear Solid (SLS) and Maxwell-Weichart exhibit better fit performance. Enhanced fractional order derivative SLS (FSLS) model is also evaluated through use of a hybrid spring-pot of order α. FSLS outperforms the conventional models, demonstrating superior representation of the stress-relaxation curve's initial value and non-linear asymptotic decent. FSLS parameters exhibit notable orientation- and region-specific values, trending with observed tissue structural constituents, such as glycosaminoglycan and collagen. To the best of our knowledge, this work is the first to characterize proximal and distal bronchial energy efficiency and contextualize tissue biochemical composition in view of experimental measures and viscoelastic trends. Results provide a foundation for future investigations, particularly for understanding the role of viscoelasticity in diseased states.

Bioengineering the Blood-gas Barrier

The pulmonary blood-gas barrier represents a remarkable feat of engineering. It achieves the exquisite thinness needed for gas exchange by diffusion, the strength to withstand the stresses and strains of repetitive and changing ventilation, and the ability to actively maintain itself under varied demands. Understanding the design principles of this barrier is essential to understanding a variety of lung diseases, and to successfully regenerating or artificially recapitulating the barrier ex vivo. Many classical studies helped to elucidate the unique structure and morphology of the mammalian blood-gas barrier, and ongoing investigations have helped to refine these descriptions and to understand the biological aspects of blood-gas barrier function and regulation. This article reviews the key features of the blood-gas barrier that enable achievement of the necessary design criteria and describes the mechanical environment to which the barrier is exposed. It then focuses on the biological and mechanical components of the barrier that preserve integrity during homeostasis, but which may be compromised in certain pathophysiological states, leading to disease. Finally, this article summarizes recent key advances in efforts to engineer the blood-gas barrier ex vivo, using the platforms of lung-on-a-chip and tissue-engineered whole lungs. © 2020 American Physiological Society. Compr Physiol 10:415-452, 2020.

Mechanics of pulmonary airways: Linking structure to function through constitutive modeling, biochemistry, and histology

Breathing involves fluid-solid interactions in the lung; however, the lack of experimental data inhibits combining the mechanics of air flow to airway deformation, challenging the understanding of how biomaterial constituents contribute to tissue response. As such, lung mechanics research is increasingly focused on exploring the relationship between structure and function. To address these needs, we characterize mechanical properties of porcine airways using uniaxial tensile experiments, accounting for bronchial orientation- and location- dependency. Structurally-reinforced constitutive models are developed to incorporate the role of collagen and elastin fibers embedded within the extrafibrillar matrix. The strain-energy function combines a matrix description (evaluating six models: compressible NeoHookean, unconstrained Ogden, uncoupled Mooney-Rivlin, incompressible Ogden, incompressible Demiray and incompressible NeoHookean), superimposed with non-linear fibers (evaluating two models: exponential and polynomial). The best constitutive formulation representative of all bronchial regions is determined based on curve-fit results to experimental data, accounting for uniqueness and sensitivity. Glycosaminoglycan and collagen composition, alongside tissue architecture, indicate fiber form to be primarily responsible for observed airway anisotropy and heterogeneous mechanical behavior. To the authors' best knowledge, this study is the first to formulate a structurally-motivated constitutive model, augmented with biochemical analysis and microstructural observations, to investigate the mechanical function of proximal and distal bronchi. Our systematic pulmonary tissue characterization provides a necessary foundation for understanding pulmonary mechanics; furthermore, these results enable clinical translation through simulations of airway obstruction in disease, fluid-structure interaction insights during breathing, and potentially, predictive capabilities for medical interventions. STATEMENT OF SIGNIFICANCE: The advancement of pulmonary research relies on investigating the biomechanical response of the bronchial tree. Experiments demonstrating the non-linear, heterogeneous, and anisotropic material behavior of porcine airways are used to develop a structural constitutive model representative of proximal and distal bronchial behavior. Calibrated material parameters exhibit regional variation in biomaterial properties, initially hypothesized to originate from tissue constituents. Further exploration through biochemical and histological analysis indicates mechanical function is primarily governed by microstructural form. The results of this study can be directly used in finite element and fluid-structure interaction models to enable physiologically relevant and more accurate computational simulations aimed to help diagnose and monitor pulmonary disease.

Characterization of Glycosaminoglycans in Gaping and Intact Connective Tissues of Farmed Atlantic Salmon (Salmo salar) Fillets by Mass Spectrometry

In the Atlantic salmon (Salmo salar) aquaculture industry, gaping (the separation of muscle bundles from the connective tissue) is a major quality problem. This study characterized chondroitin sulfate (CS) and heparan sulfate (HS) in the connective tissue of intact and gaping salmon fillets from 30 salmon by mass spectrometry. Statistical difference was detected between gaping and intact tissues only when comparing pairwise samples from the same individual (n = 10). The gaping tissue had a lower content of monosulfated CS disaccharides (p = 0.027), and the relative distribution of CS disaccharides was significantly different (p < 0.05). The HS chains were short (average = 14.09, SD = 4.91), and the intact tissue seemed to have a more uniform HS chain structure compared to the gaping tissue. Time-series samples from the same individuals are recommended for future research to improve the understanding of reasons and implications of these differences.

Constituent-specific material behavior of soft biological tissue: experimental quantification and numerical identification for lung parenchyma

In this study, we present a method to experimentally quantify and numerically identify the constituent-specific material behavior of soft biological tissues. This allows the clear identification of the individual contributions of major load-bearing constituents and their interactions in the constitutive law. While the overall approach is applicable for many tissues, here it will be presented for the identification of a sophisticated constituent-specific material model of viable lung parenchyma. This material model will help to better model the effects of various lung diseases that feature altered fiber content in the lungs, such as emphysema or fibrosis. To experimentally quantify the mechanical properties of collagen, elastin, collagen-elastin-fiber interactions, and ground substance, we examined 18 collagenase and elastase treated rat lung parenchymal slices. The mechanical contributions of the collagen and elastin fibers in the living tissue were inferred from uniaxial tension tests comparing the behavior before and after the selective digestion of the respective fibers. In order to also obtain the mechanical influence of the ground substance, we consecutively treated the samples with both proteases. Collagen and elastin fibers are morphologically interconnected. Thus, a mechanical interaction between these fibers appears likely, but has not yet been experimentally verified. In this paper, we propose an experimental method to quantitatively assess the mechanical behavior of these collagen-elastin-fiber interactions. Based on our experiments, we have identified individual material models within a nonlinear continuum mechanics framework for each load-bearing component via an inverse analysis. The proposed constituent-specific material law can be incorporated into computational models of the respiratory system to simulate and even predict the behavior and alteration of the individual constituents and their effect on the whole respiratory system during normal and artificial breathing, in particular in the case of diseases that alter the fibers in the tissue.

A viscoelastic nonlinear compressible material model of lung parenchyma - Experiments and numerical identification

Characterizing material properties of lung parenchyma is essential in order to describe and predict the mechanical behavior of the lung in health and disease. Hence, we aim to identify the viscoelastic constitutive behavior of viable lung parenchyma with a particular focus on the nonlinear, compressible, and frequency-dependent material properties. To quantify the viscoelastic material behavior of rat lung parenchyma experimentally, we performed uniaxial tension tests with different frequencies, including the whole range of physiological frequencies, in combination with full-field displacement measurements (a total of 120 tests on 30 samples of 5 rats). By means of these experimental measurements, we identified the material parameters of two viscoelastic material models applicable to large three-dimensional deformations, i.e., the standard linear solid model and the model of fractional viscoelasticity. Our aim is to identify one set of material parameters that describes the whole range of physiological frequencies; therefore, we utilized a coupled inverse analysis, which equally incorporates all different tensile tests performed on one sample. The model most suitable for the description of the viscoelastic, nonlinear, and compressible material behavior of viable rat lung parenchyma is the strain energy function [Formula: see text] in combination with the model of fractional viscoelasticity (τ=0.06454s,α=0.5378, and β=1.856). This material model was validated to describe the complex nonlinear and compressible viscoelastic material behavior of lung parenchyma and can be utilized in finite element simulations of the whole range of physiological frequencies. Based on this model, it will be possible to quantify the stresses and strains of lung tissue during spontaneous and artificial breathing more reliable in the future.

A coupled approach for identification of nonlinear and compressible material models for soft tissue based on different experimental setups - Exemplified and detailed for lung parenchyma

In this paper, a coupled inverse analysis is proposed to identify nonlinear compressible hyperelastic material models described by two sets of experiments. While the overall approach is applicable for different materials, here it will be presented for viable lung parenchyma. Characterizing the material properties of lung parenchyma is essential to describe and predict the mechanical behavior of the respiratory system in health and disease. During breathing and mechanical ventilation, lung parenchyma is mainly subjected to volumetric deformations along with isochoric and asymmetric deformations that occur especially in diseased heterogeneous lungs. Notwithstanding, most studies examine lung tissue in predominantly isochoric tension tests. In this paper, we investigate the volumetric material behavior as well as the isochoric deformations in two sets of experiments: namely, volume-pressure-change experiments (performed with 287 samples of 26 rats) and uniaxial tension tests (performed with 30 samples of 5 rats). Based on these sets of experiments, we propose a coupled inverse analysis, which simultaneously incorporates both measurement sets to optimize the material parameters. Accordingly, we determine a suitable material model using the experimental results of both sets of experiments in one coupled identification process. The identified strain energy function with the corresponding material parameters [Formula: see text] is validated to model both sets of experiments precisely. Hence, this constitutive model describes the complex volumetric and isochoric nonlinear material behavior of lung parenchyma. This derived material model can be used for nonlinear finite element simulations of lung parenchyma and will help to quantify the stresses and strains of lung tissue during spontaneous and artificial breathing; thus, allowing new insights into lung function and biology.

Optical clearing: impact of optical and dielectric properties of clearing solutions on pulmonary tissue mechanics

Optical clearing allows tissue visualization under preservation of organ integrity. Optical clearing of organs with a physiological change in three-dimensional geometry (such as the lung) would additionally allow visualization of macroscopic and microscopic tissue geometry. A prerequisite, however, is the preservation of the native tissue mechanics of the optically cleared lung tissue. We investigated the impact of optical and dielectric properties of clearing solutions on biomechanics and clearing potency in porcine tissue strips of healthy lungs. After fixation, bleaching, and rehydration, four methods of optical clearing were investigated using eight different protocols. The mechanical and optical properties of the cleared lung tissue strips were investigated by uniaxial tensile testing and by analyzing optical transparency and translucency for red, green, and blue light before, during, and after the biochemical optical clearing process. Fresh tissue strips were used as controls. Best balance between efficient clearing and preserved mechanics was found for clearing with a 1:1 mixture of dimethyl sulfoxide (DMSO) and aniline. Our findings show that 1) the degree of tissue transparency and translucency correlated with the refractive index of the clearing solution index ( r = 0.976, P = 0.0004; and r = 0.91, P = 0.0046, respectively), 2) tissue mechanics were affected by dehydration and the type of clearing solution, and 3) tissue biomechanics and geometry correlated with the dielectric constant of the clearing solution ( r = −0.98, P < 0.00001; and r = 0.69, P = 0.013, respectively). We show that the lower the dielectric constant of the clearing solutions, the larger the effect on tissue stiffness. This suggests that the dielectric constant is an important measure in determining the effect of a clearing solution on lung tissue biomechanics. Optimal tissue transparency requires complete tissue dehydration and a refractive index of 1.55 of the clearing solution.

NEW & NOTEWORTHY Investigating optical clearing in porcine lung tissue strips, we found that refractive index and dielectric constant of the clearing solution affected tissue clearing and biomechanics. By documenting the impact of the composition of the clearing solution on clearing potency and preservation of tissue mechanics, our results help to compose optimal clearing solutions. In addition, the results allow conclusions on the molecular interaction of solvents with collagen fibers in tissue, thereby consolidating existing theories about the functionality of collagen.

Glycosaminoglycans contribute to extracellular matrix fiber recruitment and arterial wall mechanics

Elastic and collagen fibers are well known to be the major load-bearing extracellular matrix (ECM) components of the arterial wall. Studies of the structural components and mechanics of arterial ECM generally focus on elastin and collagen fibers, and glycosaminoglycans (GAGs) are often neglected. Although GAGs represent only a small component of the vessel wall ECM, they are considerably important because of their diverse functionality and their role in pathological processes. The goal of this study was to study the mechanical and structural contributions of GAGs to the arterial wall. Biaxial tensile testing was paired with multiphoton microscopic imaging of elastic and collagen fibers in order to establish the structure-function relationships of porcine thoracic aorta before and after enzymatic GAG removal. Removal of GAGs results in an earlier transition point of the nonlinear stress-strain curves [Formula: see text]. However, stiffness was not significantly different after GAG removal treatment, indicating earlier but not absolute stiffening. Multiphoton microscopy showed that when GAGs are removed, the adventitial collagen fibers are straighter, and both elastin and collagen fibers are recruited at lower levels of strain, in agreement with the mechanical change. The amount of stress relaxation also decreased in GAG-depleted arteries [Formula: see text]. These findings suggest that the interaction between GAGs and other ECM constituents plays an important role in the mechanics of the arterial wall, and GAGs should be considered in addition to elastic and collagen fibers when studying arterial function.

Comparative biology of decellularized lung matrix: Implications of species mismatch in regenerative medicine

Lung engineering is a promising technology, relying on re-seeding of either human or xenographic decellularized matrices with patient-derived pulmonary cells. Little is known about the species-specificity of decellularization in various models of lung regeneration, or if species dependent cell-matrix interactions exist within these systems. Therefore decellularized scaffolds were produced from rat, pig, primate and human lungs, and assessed by measuring residual DNA, mechanical properties, and key matrix proteins (collagen, elastin, glycosaminoglycans). To study intrinsic matrix biologic cues, human endothelial cells were seeded onto acellular slices and analyzed for markers of cell health and inflammation. Despite similar levels of collagen after decellularization, human and primate lungs were stiffer, contained more elastin, and retained fewer glycosaminoglycans than pig or rat lung scaffolds. Human endothelial cells seeded onto human and primate lung tissue demonstrated less expression of vascular cell adhesion molecule and activation of nuclear factor-κB compared to those seeded onto rodent or porcine tissue. Adhesion of endothelial cells was markedly enhanced on human and primate tissues. Our work suggests that species-dependent biologic cues intrinsic to lung extracellular matrix could have profound effects on attempts at lung regeneration.

The contribution of glycosaminoglycans to the mechanical behaviour of the posterior human sclera

We characterized the structural and mechanical changes after experimental digestion of sulfated glycosaminoglycans (s-GAGs) in the human posterior sclera, using ultrasound thickness measurements and an inflation test with three-dimensional digital image correlation (3D-DIC). Each scleral specimen was first incubated in a buffer solution to return to full hydration, inflation tested, treated in a buffer solution with chondroitinase ABC (ChABC), then inflation tested again. After each test series, the thickness of eight locations was measured. After enzymatic treatment, the average scleral thickness decreased by 13.3% (p < 0.001) and there was a stiffer overall stress-strain response (p < 0.05). The stress-strain response showed a statistically significant increase in the low-pressure stiffness, high-pressure stiffness and hysteresis. Thus, s-GAGs play a measurable role in the mechanical behaviour of the posterior human sclera.

Deficiency of decorin induces expression of Foxp3 in CD4⁺CD25⁺ T cells in a murine model of allergic asthma

BACKGROUND AND OBJECTIVE

Decorin (Dcn), an extracellular matrix proteoglycan, has several important biological functions, and its deposition is altered in the airway wall of humans with asthma and animal models of asthma. Due to its high affinity for transforming growth factor beta (TGF)-β, Dcn can function as part of a negative feedback mechanism, resulting in the regulation of this factor's bioavailability. Dcn deficient (Dcn(-/-) ) mice develop reduced airway inflammation, hyperresponsiveness and remodeling in response to repeated allergen challenge; we investigated whether regulatory T cells play a role in the diminished airway response of Dcn(-/-) mice.

METHODS

Dcn(-/-) and Dcn(+/+) mice (C57Bl/6) were sensitized with ovalbumin (OVA) and challenged intra-nasally 3 days/week × 3 weeks. After allergen challenge, bronchoalveolar lavage was collected to quantify total and differential cell counts and cytokine levels. Inflammatory cell number and cytokine messenger ribonucleic acid (mRNA) production were assessed in lung tissues. Cells from lung and spleen were extracted to evaluate regulatory T cells.

RESULTS

Tissue inflammation and interleukin (IL)-13 mRNA expression were significantly increased in OVA-challenged Dcn(+/+) mice, only. The increased expression of Foxp3 in CD4(+) CD25(+) T cells found in lung of OVA-challenged Dcn(-/-) mice was accompanied by an increase in IL-10 mRNA.

CONCLUSIONS

Our data demonstrated that a diminished lung inflammation in OVA challenged Dcn(-/-) mice was accompanied by a higher expression of regulatory T cells and IL-10 mRNA levels. These results reinforce the importance of Dcn in biological processes, particularly in an allergic model of asthma.

The effects of glycosaminoglycan degradation on the mechanical behavior of the posterior porcine sclera

Pathological changes in scleral glycosaminoglycan (GAG) content and in scleral mechanical properties have been observed in eyes with glaucoma and myopia. The purpose of this study is to investigate the effect of GAG removal on the scleral mechanical properties to better understand the impact of GAG content variations in the pathophysiology of glaucoma and myopia. We measured how the removal of sulphated GAG (s-GAG) affected the hydration, thickness and mechanical properties of the posterior sclera in enucleated eyes of 6-9 month-old pigs. Measurements were made in 4 regions centered on the optic nerve head (ONH) and evaluated under 3 conditions: no treatment (control), after treatment in buffer solution alone, and after treatment in buffer containing chondroitinase ABC (ChABC) to remove s-GAGs. The specimens were mechanically tested by pressure-controlled inflation with full-field deformation mapping using digital image correlation (DIC). The mechanical outcomes described the tissue tensile and viscoelastic behavior. Treatment with buffer alone increased the hydration of the posterior sclera compared to controls, while s-GAG removal caused a further increase in hydration compared to buffer-treated scleras. Buffer-treatment significantly changed the scleral mechanical behavior compared to the control condition, in a manner consistent with an increase in hydration. Specifically, buffer-treatment led to an increase in low-pressure stiffness, hysteresis, and creep rate, and a decrease in high-pressure stiffness. ChABC-treatment on buffer-treated scleras had opposite mechanical effects than buffer-treatment on controls, leading to a decrease in low-pressure stiffness, hysteresis, and creep rate, and an increase in high-pressure stiffness and transition strain. Furthermore, s-GAG digestion dramatically reduced the differences in the mechanical behavior among the 4 quadrants surrounding the ONH as well as the differences between the circumferential and meridional responses compared to the buffer-treated condition. These findings demonstrate a significant effect of s-GAGs on both the stiffness and time-dependent behavior of the sclera. Alterations in s-GAG content may contribute to the altered creep and stiffness of the sclera of myopic and glaucoma eyes.

Proteoglycans maintain lung stability in an elastase-treated mouse model of emphysema

Extracellular matrix remodeling and tissue rupture contribute to the progression of emphysema. Lung tissue elasticity is governed by the tensile stiffness of fibers and the compressive stiffness of proteoglycans. It is not known how proteoglycan remodeling affects tissue stability and destruction in emphysema. The objective of this study was to characterize the role of remodeled proteoglycans in alveolar stability and tissue destruction in emphysema. At 30 days after treatment with porcine pancreatic elastase, mouse lung tissue stiffness and alveolar deformation were evaluated under varying tonicity conditions that affect the stiffness of proteoglycans. Proteoglycans were stained and measured in the alveolar walls. Computational models of alveolar stability and rupture incorporating the mechanical properties of fibers and proteoglycans were developed. Although absolute tissue stiffness was only 24% of normal, changes in relative stiffness and alveolar shape distortion due to changes in tonicity were increased in emphysema (P < 0.01 and P < 0.001). Glycosaminoglycan amount per unit alveolar wall length, which is responsible for proteoglycan stiffness, was higher in emphysema (P < 0.001). Versican expression increased in the tissue, but decorin decreased. Our network model predicted that the rate of tissue deterioration locally governed by mechanical forces was reduced when proteoglycan stiffness was increased. Consequently, this general network model explains why increasing proteoglycan deposition protects the alveolar walls from rupture in emphysema. Our results suggest that the loss of proteoglycans observed in human emphysema contributes to disease progression, whereas treatments that promote proteoglycan deposition in the extracellular matrix should slow the progression of emphysema.

Lung parenchymal mechanics

The lung parenchyma comprises a large number of thin-walled alveoli, forming an enormous surface area, which serves to maintain proper gas exchange. The alveoli are held open by the transpulmonary pressure, or prestress, which is balanced by tissues forces and alveolar surface film forces. Gas exchange efficiency is thus inextricably linked to three fundamental features of the lung: parenchymal architecture, prestress, and the mechanical properties of the parenchyma. The prestress is a key determinant of lung deformability that influences many phenomena including local ventilation, regional blood flow, tissue stiffness, smooth muscle contractility, and alveolar stability. The main pathway for stress transmission is through the extracellular matrix. Thus, the mechanical properties of the matrix play a key role both in lung function and biology. These mechanical properties in turn are determined by the constituents of the tissue, including elastin, collagen, and proteoglycans. In addition, the macroscopic mechanical properties are also influenced by the surface tension and, to some extent, the contractile state of the adherent cells. This chapter focuses on the biomechanical properties of the main constituents of the parenchyma in the presence of prestress and how these properties define normal function or change in disease. An integrated view of lung mechanics is presented and the utility of parenchymal mechanics at the bedside as well as its possible future role in lung physiology and medicine are discussed.

Effects of the decellularization method on the local stiffness of acellular lungs

Lung bioengineering, a novel approach to obtain organs potentially available for transplantation, is based on decellularizing donor lungs and seeding natural scaffolds with stem cells. Various physicochemical protocols have been used to decellularize lungs, and their performance has been evaluated in terms of efficient decellularization and matrix preservation. No data are available, however, on the effect of different decellularization procedures on the local stiffness of the acellular lung. This information is important since stem cells directly sense the rigidity of the local site they are engrafting to during recellularization, and it has been shown that substrate stiffness modulates cell fate into different phenotypes. The aim of this study was to assess the effects of the decellularization procedure on the inhomogeneous local stiffness of the acellular lung on five different sites: alveolar septa, alveolar junctions, pleura, and vessels' tunica intima and tunica adventitia. Local matrix stiffness was measured by computing Young's modulus with atomic force microscopy after decellularizing the lungs of 36 healthy rats (Sprague-Dawley, male, 250-300 g) with four different protocols with/without perfusion through the lung circulatory system and using two different detergents (sodium dodecyl sulfate [SDS] and 3-[(3-cholamidopropyl) dimethylammonio]-1-propanesulfonate [CHAPS]). The local stiffness of the acellular lung matrix significantly depended on the site within the matrix (p<0.001), ranging from ∼ 15 kPa at the alveolar septum to ∼ 60 kPa at the tunica intima. Acellular lung stiffness (p=0.003) depended significantly, albeit modestly, on the decellularization process. Whereas perfusion did not induce any significant differences in stiffness, the use of CHAPS resulted in a ∼ 35% reduction compared with SDS, the influence of the detergent being more important in the tunica intima. In conclusion, lung matrix stiffness is considerably inhomogeneous, and conventional decellularization procedures do not result in substantially different local stiffness in the acellular lung.

Time-dependent mechanical properties of aortic valve cusps: effect of glycosaminoglycan depletion

Aortic valve (AV) performance is closely linked to its structural components. Glycosaminoglycans (GAGs) are thought to influence the time-dependent properties of living tissues. This study investigates the effect of GAGs on the viscoelastic behaviour of the AV. Fresh porcine AV cusps were either treated enzymatically to remove GAGs or left untreated (control). The specimens were tested for stress relaxation and tensile properties under equibiaxial load conditions. The stress relaxation curves were fitted using a double exponential decay equation and the early relaxation constant (τ(1)) and late relaxation constant (τ(2)) calculated for each specimen. Immunohistochemistry confirmed the successful depletion of both sulphated and non-sulphated GAGs from the AV cusps. A statistical increase in τ(1) was found for both the radial and circumferential directions between the control and -GAGs group (radial, control 17.37s vs. -GAGs 25.65 s; circumferential, control 21.47s vs. -GAGs 27.37 s). It was also found that τ(1) differed between the two directions for the control group but not after GAG depletion (control, radial 17.37s vs. circumferential 21.47 s; -GAGs, radial 25.65 s vs. circumferential 27.37s). No effect on stiffness was found. The results showed that the presence of GAGs influences the mechanical viscoelastic properties of the AV but has no effect on the stiffness. The natural anisotropy, which reflects the relaxation kinematics, is lost after GAG depletion.

A rapid lung de-cellularization protocol supports embryonic stem cell differentiation in vitro and following implantation

Pulmonary diseases represent a large portion of neonatal and adult morbidity and mortality. Many of these have no cure, and new therapeutic approaches are desperately needed. De-cellularization of whole organs, which removes cellular elements but leaves intact important extracellular matrix (ECM) proteins and three-dimensional architecture, has recently been investigated for ex vivo generation of lung tissues. As specific cell culture surfaces, including ECM composition, profoundly affect cell differentiation, this approach offers a potential means of using de-cellularized lungs to direct differentiation of embryonic and other types of stem/progenitor cells into lung phenotypes. Several different methods of whole-lung de-cellularization have been reported, but the optimal method that will best support re-cellularization and generation of lung tissues from embryonic stem cells (ESCs) has not been determined. We present a 24-h approach for de-cellularizing mouse lungs utilizing a detergent-based (Triton-X100 and sodium deoxycholate) approach with maintenance of three-dimensional lung architecture and ECM protein composition. Predifferentiated murine ESCs (mESCs), with phenotypic characteristics of type II alveolar epithelial cells, were seeded into the de-cellularized lung scaffolds. Additionally, we evaluated the effect of coating the de-cellularized scaffold with either collagen or Matrigel to determine if this would enhance cell adhesion and affect mechanics of the scaffold. Finally, we subcutaneously implanted scaffolds in vivo after seeding them with mESCs that are predifferentiated to express pro-surfactant protein C (pro-SPC). The in vivo environment supported maintenance of the pro-SPC-expressing phenotype and further resulted in vascularization of the implant. We conclude that a rapid detergent-based de-cellularization approach results in a scaffold that can maintain phenotypic evidence of alveolar epithelial differentiation of ESCs and support neovascularization after in vivo implantation.

Allergen-induced airway remodeling in brown norway rats: structural and metabolic changes in glycosaminoglycans

Increased proteoglycan (PG) deposition is a feature of airway remodeling in asthma. Glycosaminoglycans (GAGs) mediate many of the biological and mechanical properties of PGs by providing docking sites through their carbohydrate chains to bioactive ligands; therefore, it is imperative to define structural and metabolic changes of GAGs in asthma. Using a Brown Norway (BN) ovalbumin (OVA)-sensitized and -challenged rat model to induce airway remodeling, we found excessive deposition of chondroitin/dermatan (CS/DS)-, heparan (HS), and keratan (KS) sulfate GAGs in the airways and bronchoalveolar lavage cells of OVA-challenged rats. Disaccharide composition of CS/DS of OVA-challenged rats was significantly different compared with saline-treated (SAL) control rats, with increased levels of 0-, 6-, and 4-sulfated disaccharides. Increases in the amount and a change in the proportion of CS/DS versus HS GAGs were noted in OVA-challenged rats. The higher content and sulfation of CS/DS disaccharides was reflected by the increased expression of xylosyltransferase-I, β1,3-glucuronosyltransferase-I, chondroitin-4, and chondroitin-6 sulfotransferase genes and protein expression of xylosyltransferase-I and β1,3-glucuronosyltransferase-I in OVA-challenged rats. Genes encoding the core proteins of the CS/DS and KS-containing PGs, such as versican, biglycan, decorin, and lumican, were overexpressed in OVA-challenged rats. Our results suggest that GAG biosynthetic enzymes may be involved in the altered expression of GAGs in the airways and are potential targets for inhibiting excess PG-GAG deposition and the airway remodeling process in asthma.

Tensile force transmission in human patellar tendon fascicles is not mediated by glycosaminoglycans

Correct mechanical function of tendons is essential to human physiology and therefore the mechanical properties of tendon have been a subject of research for many decades now. However, one of the most fundamental questions remains unanswered: How is load transmitted through the tendon? It has been suggested that the proteoglycan-associated glycosaminoglycans (GAGs) found on the surface of the collagen fibrils may be an important transmitter of load, but existing results are ambiguous and have not investigated human tendons. We have used a small-scale mechanical testing system to measure the mechanical properties of fascicles from human patellar tendon at two different deformation rates before and after removal of GAGs by treatment with chondroitinase ABC. Efficiency of enzyme treatment was quantified using dimethylmethylene blue assay. Removal of at least 79% of the GAGs did not significantly change the tendon modulus, relative energy dissipation, peak stress, or peak strain. The effect of deformation rate was not modulated by the treatment either, indicating no effect on viscosity. These results suggest that GAGs cannot be considered mediators of tensile force transmission in the human patellar tendon, and as such, force transmission must either take place through other matrix components or the fibrils must be mechanically continuous at least to the tested length of 7 mm.

A role for decorin in a murine model of allergen-induced asthma

Decorin (Dcn) is an extracellular matrix proteoglycan, which affects airway mechanics, airway-parenchymal interdependence, airway smooth muscle proliferation and apoptosis, and transforming growth factor-β bioavailability. As Dcn deposition is differentially altered in asthma, we questioned whether Dcn deficiency would impact the development of allergen-induced asthma in a mouse model. Dcn(-/-) and Dcn(+/+) mice (C57Bl/6) were sensitized with ovalbumin (OA) and challenged intranasally 3 days/wk × 3 wk. After OA challenge, mice were anesthetized, and respiratory mechanics measured under baseline conditions and after delivery of increasing concentrations of methacholine aerosol. Complex impedance was partitioned into airway resistance and tissue elastance and damping. Bronchoalveolar lavage was performed. Lungs were excised, and tissue sections evaluated for inflammatory cell influx, α-smooth muscle actin, collagen, biglycan, and Dcn deposition. Changes in TH-2 cytokine mRNA and protein were also measured. Airway resistance was increased in OA-challenged Dcn(+/+) mice only (P < 0.05), whereas tissue elastance and damping were increased in both OA-challenged Dcn(+/+) and Dcn(-/-), but more so in Dcn(+/+) mice (P < 0.001). Inflammation and collagen staining within the airway wall were increased with OA in Dcn(+/+) only (P < 0.001 and P < 0.01, respectively, vs. saline). IL-5 and IL-13 mRNA were increased in lung tissue of OA-challenged Dcn(+/+) mice. Dcn deficiency resulted in more modest OA-induced hyperresponsiveness, evident at the level of the central airways and distal lung. Differences in physiology were accompanied by differences in inflammation and remodeling. These findings may be, in part, due to the well-described ability of Dcn to bind transforming growth factor-β and render it less bioavailable.

Material model of lung parenchyma based on living precision-cut lung slice testing

We describe a novel constitutive model of lung parenchyma, which can be used for continuum mechanics based predictive simulations. To develop this model, we experimentally determined the nonlinear material behavior of rat lung parenchyma. This was achieved via uni-axial tension tests on living precision-cut rat lung slices. The resulting force-displacement curves were then used as inputs for an inverse analysis. The Levenberg-Marquardt algorithm was utilized to optimize the material parameters of combinations and recombinations of established strain-energy density functions (SEFs). Comparing the best-fits of the tested SEFs we found Wpar = 4.1 kPa(I1-3)2 + 20.7 kPa(I1 - 3)3 + 4.1 kPa(-2 ln J + J2 - 1) to be the optimal constitutive model. This SEF consists of three summands: the first can be interpreted as the contribution of the elastin fibers and the ground substance, the second as the contribution of the collagen fibers while the third controls the volumetric change. The presented approach will help to model the behavior of the pulmonary parenchyma and to quantify the strains and stresses during ventilation.

Lung tissue mechanics as an emergent phenomenon

The mechanical properties of lung parenchymal tissue are both elastic and dissipative, as well as being highly nonlinear. These properties cannot be fully understood, however, in terms of the individual constituents of the tissue. Rather, the mechanical behavior of lung tissue emerges as a macroscopic phenomenon from the interactions of its microscopic components in a way that is neither intuitive nor easily understood. In this review, we first consider the quasi-static mechanical behavior of lung tissue and discuss computational models that show how smooth nonlinear stress-strain behavior can arise through a percolation-like process in which the sequential recruitment of collagen fibers with increasing strain causes them to progressively take over the load-bearing role from elastin. We also show how the concept of percolation can be used to link the pathologic progression of parenchymal disease at the micro scale to physiological symptoms at the macro scale. We then examine the dynamic mechanical behavior of lung tissue, which invokes the notion of tissue resistance. Although usually modeled phenomenologically in terms of collections of springs and dashpots, lung tissue viscoelasticity again can be seen to reflect various types of complex dynamic interactions at the molecular level. Finally, we discuss the inevitability of why lung tissue mechanics need to be complex.

Increased deposition of chondroitin/dermatan sulfate glycosaminoglycan and upregulation of β1,3-glucuronosyltransferase I in pulmonary fibrosis

Pulmonary fibrosis (PF) is characterized by increased deposition of proteoglycans (PGs), in particular core proteins. Glycosaminoglycans (GAGs) are key players in tissue repair and fibrosis, and we investigated whether PF is associated with changes in the expression and structure of GAGs as well as in the expression of β1,3-glucuronosyltransferase I (GlcAT-I), a rate-limiting enzyme in GAG synthesis. Lung biopsies from idiopathic pulmonary fibrosis (IPF) patients and lung tissue from a rat model of bleomycin (BLM)-induced PF were immunostained for chondroitin sulfated-GAGs and GlcAT-I expression. Alterations in disaccharide composition and sulfation of chondroitin/dermatan sulfate (CS/DS) were evaluated by fluorophore-assisted carbohydrate electrophoresis (FACE) in BLM rats. Lung fibroblasts isolated from control (saline-instilled) or BLM rat lungs were assessed for GAG structure and GlcAT-I expression. Disaccharide analysis showed that 4- and 6-sulfated disaccharides were increased in the lungs and lung fibroblasts obtained from fibrotic rats compared with controls. Fibrotic lung fibroblasts and transforming growth factor-β(1) (TGF-β(1))-treated normal lung fibroblasts expressed increased amounts of hyaluronan and 4- and 6-sulfated chondroitin, and neutralizing anti-TGF-β(1) antibody diminished the same. TGF-β(1) upregulated GlcAT-I and versican expression in lung fibroblasts, and signaling through TGF-β type I receptor/p38 MAPK was required for TGF-β(1)-mediated GlcAT-I and CS-GAG expression in fibroblasts. Our data show for the first time increased expression of CS-GAGs and GlcAT-I in IPF, fibrotic rat lungs, and fibrotic lung fibroblasts. These data suggest that alterations of sulfation isomers of CS/DS and upregulation of GlcAT-I contribute to the pathological PG-GAG accumulation in PF.

A nonlinear constituent based viscoelastic model for articular cartilage and analysis of tissue remodeling due to altered glycosaminoglycan-collagen interactions

A constituent based nonlinear viscoelastic (VE) model was modified from a previous study (Vena, et al., 2006, "A Constituent-Based Model for the Nonlinear Viscoelastic Behavior of Ligaments," J. Biomech. Eng., 128, pp. 449-457) to incorporate a glycosaminoglycan (GAG)-collagen (COL) stress balance using compressible elastic stress constitutive equations specific to articular cartilage (AC). For uniaxial loading of a mixture of quasilinear VE constituents, time constant and relaxation ratio equations are derived to highlight how a mixture of constituents with distinct quasilinear VE properties is one mechanism that produces a nonlinear VE tissue. Uniaxial tension experiments were performed with newborn bovine AC specimens before and after approximately 55% and approximately 85% GAG depletion treatment with guanidine. Experimental tissue VE parameters were calculated directly from stress relaxation data, while intrinsic COL VE parameters were calculated by curve fitting the data with the nonlinear VE model with intrinsic GAG viscoelasticity neglected. Select tissue and intrinsic COL VE parameters were significantly different from control and experimental groups and correlated with GAG content, suggesting that GAG-COL interactions exist to modulate tissue and COL mechanical properties. Comparison of the results from this and other studies that subjected more mature AC tissue to GAG depletion treatment suggests that the GAGs interact with the COL network in a manner that may be beneficial for rapid volumetric expansion during developmental growth while protecting cells from excessive matrix strains. Furthermore, the underlying GAG-COL interactions appear to diminish as the tissue matures, indicating a distinctive remodeling response during developmental growth.

Lung parenchymal mechanics in health and disease

The mechanical properties of lung tissue are important determinants of lung physiological functions. The connective tissue is composed mainly of cells and extracellular matrix, where collagen and elastic fibers are the main determinants of lung tissue mechanical properties. These fibers have essentially different elastic properties, form a continuous network along the lungs, and are responsible for passive expiration. In the last decade, many studies analyzed the relationship between tissue composition, microstructure, and macrophysiology, showing that the lung physiological behavior reflects both the mechanical properties of tissue individual components and its complex structural organization. Different lung pathologies such as acute respiratory distress syndrome, fibrosis, inflammation, and emphysema can affect the extracellular matrix. This review focuses on the mechanical properties of lung tissue and how the stress-bearing elements of lung parenchyma can influence its behavior.

A zipper network model of the failure mechanics of extracellular matrices

Mechanical failure of soft tissues is characteristic of life-threatening diseases, including capillary stress failure, pulmonary emphysema, and vessel wall aneurysms. Failure occurs when mechanical forces are sufficiently high to rupture the enzymatically weakened extracellular matrix (ECM). Elastin, an important structural ECM protein, is known to stretch beyond 200% strain before failing. However, ECM constructs and native vessel walls composed primarily of elastin and proteoglycans (PGs) have been found to fail at much lower strains. In this study, we hypothesized that PGs significantly contribute to tissue failure. To test this, we developed a zipper network model (ZNM), in which springs representing elastin are organized into long wavy fibers in a zipper-like formation and placed within a network of springs mimicking PGs. Elastin and PG springs possessed distinct mechanical and failure properties. Simulations using the ZNM showed that the failure of PGs alone reduces the global failure strain of the ECM well below that of elastin, and hence, digestion of elastin does not influence the failure strain. Network analysis suggested that whereas PGs drive the failure process and define the failure strain, elastin determines the peak and failure stresses. Predictions of the ZNM were experimentally confirmed by measuring the failure properties of engineered elastin-rich ECM constructs before and after digestion with trypsin, which cleaves the core protein of PGs without affecting elastin. This study reveals a role for PGs in the failure properties of engineered and native ECM with implications for the design of engineered tissues.

Contribution of glycosaminoglycans to viscoelastic tensile behavior of human ligament

The viscoelastic properties of human ligament potentially guard against structural failure, yet the microstructural origins of these transient behaviors are unknown. Glycosaminoglycans (GAGs) are widely suspected to affect ligament viscoelasticity by forming molecular bridges between neighboring collagen fibrils. This study investigated whether GAGs directly affect viscoelastic material behavior in human medial collateral ligament (MCL) by using nondestructive tensile tests before and after degradation of GAGs with chondroitinase ABC (ChABC). Control and ChABC treatment (83% GAG removal) produced similar alterations to ligament viscoelasticity. This finding was consistent at different levels of collagen fiber stretch and tissue hydration. On average, stress relaxation increased after incubation by 2.2% (control) and 2.1% (ChABC), dynamic modulus increased after incubation by 3.6% (control) and 3.8% (ChABC), and phase shift increased after incubation by 8.5% (control) and 8.4% (ChABC). The changes in viscoelastic behavior after treatment were significantly more pronounced at lower clamp-to-clamp strain levels. A 10% difference in the water content of tested specimens had minor influence on ligament viscoelastic properties. The major finding of this study is that mechanical interactions between collagen fibrils and GAGs are unrelated to tissue-level viscoelastic mechanics in mature human MCL. These findings narrow the possible number of extracellular matrix molecules that have a direct contribution to ligament viscoelasticity.

Extracellular matrix and mechanical ventilation in healthy lungs: back to baro/volotrauma?

PURPOSE OF REVIEW

The extracellular matrix plays an important role in the biomechanical behaviour of the lung parenchyma. The matrix is composed of a three-dimensional fibre mesh filled with different macromolecules, including proteoglycans which have important functions in many lung pathophysiological processes, as they regulate tissue hydration, macromolecular structure and function, response to inflammatory agents, and tissue repair and remodelling. The aim of this review is to describe the role of mechanical ventilation on pulmonary extracellular matrix structure and function.

RECENT FINDINGS

Recent experimental and clinical data suggest that in healthy lungs, mechanical ventilation with tidal volume ranging between 7 and 12 ml/kg in the absence of positive end-expiratory pressure may lead to endothelial, extracellular matrix and peripheral airways damage without major inflammatory response. Several mechanisms may explain damage to the lung structure induced by mechanical ventilation: regional overdistension, 'low lung volume' associated with tidal airway closure, and inactivation of surfactant.

SUMMARY

Tidal volume reduction to 6 ml/kg may be useful during mechanical ventilation of healthy lungs. The study of the extracellular matrix may be useful to better understand the pathophysiology of ventilator-induced lung injury in healthy and diseased lungs.