Preparation and evaluation of smart food packaging films with anthocyanin Sardasht black grape based on Astragalus gummifer and chitosan nanoparticles

A new and green development in the field of food packaging is the use of colorimetric films containing anthocyanins, which not only can respond to food spoilage but also have no environmental risk and help the environment full of unacceptable and polluted substances created by humans. In this research, a completely natural film (GCNG) was made using natural materials including tragacanth gummifer (G), chitosan nanoparticles (C), and an extract containing anthocyanins of a type of wild grape called Sardasht black (G) with Alumina nanoparticles (N) for use in food packaging. This biodegradable film (GCNG) presented relatively wide color differences from red to blue in different buffer solutions (pH 2-12), which was clearly observed by the naked eye. Sardasht black grape extract contains large amounts of anthocyanins and antioxidants that can be extracted and used in the preparation of packaging films. The properties of prepared films, including mechanical properties, permeability to water vapor, solubility, swelling, as well as antimicrobial properties were checked by measuring the diameter of the diffusion area by agar disk test. GCNG films showed strong antioxidant activity and good antibacterial activity against E. coli and S. aureus. The results suggested this film has promising potential as an active and smart packaging material for applications in the food industry.

Sustainable functionalized chitosan based nano-composites for wound dressings applications: A review

Functionalized chitosan nanocomposites have been studied for wound dressing applications due to their excellent antibacterial and anti-fungal properties. Polysaccharides show excellent antibacterial and drug-release properties and can be utilized for wound healing. In this article, we comprise distinct approaches for chitosan functionalization, such as photosensitizers, dendrimers, graft copolymerization, quaternization, acylation, carboxyalkylation, phosphorylation, sulfation, and thiolation. The current review article has also discussed brief insights on chitosan nanoparticle processing for biomedical applications, including wound dressings. The chitosan nanoparticle preparation technologies have been discussed, focusing on wound dressings owing to their targeted and controlled drug release behavior. The future directions of chitosan research include; a) finding an effective solution for chronic wounds, which are unable to heal completely; b) providing effective wound healing solutions for diabetic wounds and venous leg ulcers; c) to better understanding the wound healing mechanism with such materials which can help provide the optimum solution for wound dressing; d) to provide an improved treatment option for wound healing.

Daptomycin-Biomineralized Silver Nanoparticles for Enhanced Photothermal Therapy with Anti-Tumor Effect

Silver nanoparticles as photothermal agents have the problems of low stability and low photothermal conversion efficiency. Amphiphilic daptomycin can improve the stability of silver nanoparticles, thereby improving their photothermal conversion efficiency. Herein, daptomycin-biomineralized silver nanoparticles (Dap-AgNPs) were prepared by reducing silver nitrate with sodium borohydride in the presence of daptomycin as a stabilizer and biomineralizer. The Dap-AgNPs had good solution stability and peroxidase-like activity. Furthermore, the photothermal conversion efficiency of the Dap-AgNPs was as high as 36.8%. The Dap-AgNPs displayed good photothermal stability under irradiation. More importantly, the Dap-AgNPs showed good cell compatibility with HeLa cells and HT-29 cells without irradiation by 808-nanometer near-infrared light at a concentration of 0.5 mM, and the cell viability was greater than 85.0%. However, the Dap-AgNPs displayed significant anti-tumor ability with irradiation by 808-nanometer near-infrared light, which was due to the increasing temperature of the culture medium caused by the Dap-AgNPs. In conclusion, Dap-AgNPs have potential applications as photothermal agents in the treatment of tumors.

Coating of silver nanoparticles on polyurethane film surface by green chemistry approach and investigation of antibacterial activity against S. epidermidis

Silver nanoparticles with potential antibacterial properties are included in biomaterials for the production of medical devices, which are used for diagnoses or treatment purposes. The aim of the current study was coating the polyurethane (PU) films with silver nanoparticles (AgNPs) due to their antibacterial efficacy. PU films were first modified by chitosan (CH), treated with AgNO3 to let CH chelate with silver ions, and then treated with vitamin-C (vit C) or glucose (Glu) to reduce the adsorbed ions to atomic silver to form AgNPs. The surfaces of the films were examined by ATR-FTIR, XPS, XRD, and SEM. Chemical bond formation between CH and Ag ions and AgNPs were determined by ATR-FTIR. Meanwhile, XPS and SEM analyses proved the presence of reduced metallic silver and nanoparticles on the film surfaces, respectively. According to the SEM analyses, a homogeneous distribution of AgNPs, with sizes 99–214 nm and 37–54 nm, on the film surfaces were obtained depending on Glu or vit C reduction, respectively. The films presented excellent antibacterial performance against Gram positive Staphylococcus epidermidis ( S. epidermidis). These results suggested that the mentioned green technology can be easily applied to obtain AgNP coated polymeric surfaces with very high antibacterial efficacy. Although there are some studies dealing with AgNP formation on PU sponges or fibers, to the best of our knowledge, this is the first study showing AgNP formation on the CH conjugated PU films.

An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings

A wound can be surgical, cuts from an operation or due to accident and trauma. The infected wound, as a result of bacteria growth within the damaged skin, interrupts the natural wound healing process and significantly impacts the quality of life. Wound dressing is an important segment of the skincare industry with its economic burden estimated at $ 20.4 billion (in 2021) in the global market. The results of recent clinical trials suggest that the use of modern dressings can be the easiest, most accessible, and most cost-effective way to treat chronic wounds and, hence, holds significant promise. With the sheer number of dressings in the market, the selection of correct dressing is confusing for clinicians and healthcare workers. The aim of this research was to review widely used types of antibacterial wound dressings, as well as emerging products, for their efficiency and mode of action. In this review, we focus on introducing antibiotics and antibacterial nanoparticles as two important and clinically widely used categories of antibacterial agents. The perspectives and challenges for paving the way for future research in this field are also discussed. This article is protected by copyright. All rights reserved.

Gum Acacia-Crosslinked-Poly(Acrylamide) Hydrogel Supported C3N4/BiOI Heterostructure for Remediation of Noxious Crystal Violet Dye

Herein, we report the designing of a C₃N₄/BiOI heterostructure that is supported on gum acacia-crosslinked-poly(acrylamide) hydrogel to fabricate a novel nanocomposite hydrogel. The potential application of the obtained nanocomposite hydrogel to remediate crystal violet dye (CVD) in an aqueous solution was explored. The structural and functional analysis of the nanocomposite hydrogel was performed by FTIR (Fourier transform infrared spectroscopy), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The different reaction parameters, such as CVD concentration, nanocomposite hydrogel dosage, and working pH, were optimized. The C₃N₄/BiOI heterostructure of the nanocomposite hydrogel depicts Z-scheme as the potential photocatalytic mechanism for the photodegradation of CVD. The degradation of CVD was also specified in terms of COD and HR-MS analysis was carried to demonstrate the major degradation pathways.

Facile Preparation of Chitosan-Based Composite Film with Good Mechanical Strength and Flame Retardancy

To improve on the poor strength and flame retardancy of a chitosan (CS)-based functional film, cellulose nanofiber (CNF) was taken as the reinforced material and both ammonium polyphosphate (APP) and branched polyethyleneimine (BPEI) as the flame-retardant additives in the CS matrix to prepare the CS/CNF/APP/BPEI composite film by simple drying. The resulting composite film showed good mechanical strength, with a tensile strength reaching 71.84 Mpa due to the high flexibility of CNF and the combination of CS, CNF and BPEI through strong hydrogen bonding interactions. The flame retardant-performance of the composite film greatly enhanced the limit oxygen index (LOI), up to 32.7% from 27.6% for the pure film, and the PHRR intensity decreased to 28.87 W/g from 39.38% in the micro-scale combustion calorimetry (MCC) test due to the ability of BPEI to stimulate the decomposition of APP, releasing non-flammable gases such as CO₂, N₂, NH₃, etc., and forming a protective phosphating layer to block the entry of O₂. Based on the good flame retardancy, mechanical strength and transparency, the CS/CNF/APP/BPEI composite film has a great potential for future applications.

Preparation and Characterization of Antibacterial Films with Eggshell-Membrane Biopolymers Incorporated with Chitosan and Plant Extracts

A series of films containing chitosan (CS), eggshell membrane (ESM), soluble eggshell membrane (SEP), and plant extracts from Thymus vulgaris and Origanum valgare were prepared with varying concentrations and compositions. These novel films were characterized extensively with respect to film thickness and uniformity, solution absorption, degradation, microenvironmental pH, and antibacterial properties. All the films were flexible with appropriate mechanical stability. After 48 h of soaking in a lysozyme solution, all the films degraded 64 ± 4%, which would be expected to allow for the release of the plant extracts. The plant extracts on their own showed a pH of approximately 4, with the blended films having microenvironmental pHs from approximately 6.4–7.0, which would be expected to promote wound healing. A CS-ESM-SEP film with 5% of each plant extract inhibited almost all E. coli growth in liquid cultures and had no detriments to fluid absorption. Fluid absorption was approximately 100–150% by weight for all the films. The incorporation of SEP and plant extracts to a CS-ESM film provides a promising and novel method for the incorporation of SEP and antibacterial agents in a film with no detriment to wound fluid absorption or film degradation.

Advancements in Fabrication and Application of Chitosan Composites in Implants and Dentistry: A Review

Chitosan is a biopolymer that is found in nature and is produced from chitin deacetylation. Chitosan has been studied thoroughly for multiple applications with an interdisciplinary approach. Antifungal antibacterial activities, mucoadhesion, non-toxicity, biodegradability, and biocompatibility are some of the unique characteristics of chitosan-based biomaterials. Moreover, chitosan is the only widely-used natural polysaccharide, and it is possible to chemically modify it for different applications and functions. In various fields, chitosan composite and compound manufacturing has acquired much interest in developing several promising products. Chitosan and its derivatives have gained attention universally in biomedical and pharmaceutical industries as a result of their desired characteristics. In the present mini-review, novel methods for preparing chitosan-containing materials for dental and implant engineering applications along with challenges and future perspectives are discussed.

Curcumin-Chitosan Nanocomposite Formulation Containing Pongamia pinnata-Mediated Silver Nanoparticles, Wound Pathogen Control, and Anti-Inflammatory Potential

BACKGROUND

Because of its diverse range of use in several ethics of diagnosis and care of multiple diseases, nanotechnology has seen remarkable growth and has become a key component of medical sciences. In recent years, there has been rapid advancement in medicine and biomaterials. Nanomedicine aids in illness prevention, diagnosis, monitoring, and treatment.

AIM

The purpose of this work is to evaluate the antibacterial, anti-inflammatory, and cytotoxic capabilities of green produced silver nanoparticle with the addition of curcumin-assisted chitosan nanocomposite (SCCN) against wound pathogenic as reducing agents.

MATERIALS AND METHODS

The plant extract of Pongamia pinnata, silver nanoparticles, and its based curcumin nanoformulations was studied in this study utilizing UV visible spectrophotometer, selected area electron diffraction (SAED), and TEM. Anti-inflammatory, antimicrobial, and cytotoxic tests were performed on silver nanoparticles with the addition of curcumin-assisted chitosan nanocomposite (SCCN). Furthermore, these produced nanocomposites were coated on clinical silk and tested for antibacterial activity.

RESULTS

The produced silver nanoparticle with the addition of curcumin-assisted chitosan nanocomposite (SCCN) has significant antibacterial activities against Pseudomonas aeruginosa and staphylococcus aureus. They are as well as possess anti-inflammatory activity and furthermore prove to be biocompatible.

CONCLUSION

This advancement in the field of biomaterials, which means nanocomposite, not only helps to reduce the harmful effects of pathogenic organisms while representing an environmentally benign material but it also shows to be a material with zero danger to humans and the environment.

The Expanded Role of Chitosan in Localized Antimicrobial Therapy

Chitosan is one of the most studied natural origin polymers for biomedical applications. This review focuses on the potential of chitosan in localized antimicrobial therapy to address the challenges of current rising antimicrobial resistance. Due to its mucoadhesiveness, chitosan offers the opportunity to prolong the formulation residence time at mucosal sites; its wound healing properties open possibilities to utilize chitosan as wound dressings with multitargeted activities and more. We provide an unbiased overview of the state-of-the-art chitosan-based delivery systems categorized by the administration site, addressing the site-related challenges and evaluating the representative formulations. Specifically, we offer an in-depth analysis of the current challenges of the chitosan-based novel delivery systems for skin and vaginal infections, including its formulations optimizations and limitations. A brief overview of chitosan's potential in treating ocular, buccal and dental, and nasal infections is included. We close the review with remarks on toxicity issues and remaining challenges and perspectives.

Chronic wound healing by controlled release of chitosan hydrogels loaded with silver nanoparticles and calendula extract

As the skin is the main protective organ of the body, it is exposed to wounds or injuries which carry out a healing process during a period of approximately 15 days depending on the severity of the injury. In the present research, the development of chitosan-based hydrogels loaded with silver nanoparticles and calendula extract (Ch-AgNPs-Ce) was proposed. This can be used to fulfill the hemostatic, anti-infective, antibacterial, healing and anti-inflammatory functions through controlled release of the nanoparticles and calendula extract in substitution of commonly used drugs. The physical properties of the silver nanoparticles were analyzed by UV-visible spectroscopy, scanning and transmission electron microscopy, showing a size between 50 and 100 nm. The antibacterial properties were evaluated by the agar well diffusion method. Antimicrobial testing of the hydrogels showed that the inclusion of silver nanoparticles provides concentration-dependent antibacterial behavior against E. coli and S. aureus. The healing properties of the system were tested in two diabetic patients to whom said hydrogels were placed, obtaining a positive curative result after a few weeks. Therefore, it can be concluded that Ch-AgNPs-Ce hydrogels can achieve healing in chronic or exposed wounds after a period of time which can be used in alternative treatments in patients with poor healing capacity.

Novel fabrication of dual nanoparticle loaded-co-polymeric dressing for effective healing efficiency in wound care after fracture surgery

In the present study, curcumin loaded chitosan/poly ethylene glycol nanomaterial (CUR loaded CH/PEG/AgNPs) was fabricated and characterized for wound healing efficiency after fracture surgery. The interaction of functional groups and crystal nature were recorded under FTIR and XRD spectrometer and reveals that the stabilization and purity of NPs was mediated by OH/NH₂ groups in chitosan. FESEM showed the presence of spherical and well dispersed particles. The average size of the particle was 13.48 nm. The CUR loaded CH/PEG/AgNPs showed higher swelling capacity (495.6 g/g) in phosphate buffer saline compared to water (140.2 g/g). The drug loading efficiency was higher in CUR loaded CH/PEG/AgNPs compared to CH/PEG films as recorded by the absorbance peak at 460 nm corresponds to curcumin in the composite. A dose dependent cytotoxicity of CUR loaded CH/PEG/AgNPs was noticed on Vero cells. The viability of Vero cells was increased to 96.5% at 100 μg/mL. A remarkable change in Vero cells such as condensed nuclei and membrane blabbing was noticed in cells treated with CUR loaded CH/PEG/AgNPs. A greater inhibition of Staphylococcus aureus and Escherichia coli was noticed at 24 h and 48 h treated with CUR loaded CH/PEG/AgNPs. A greater healing effect by increasing the wound contraction (98% on day 12) was observed with CUR loaded CH/PEG/AgNPs compared to control. Histopathological examination demonstrated that CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised rats. The results of this study conclude that CUR loaded CH/PEG/AgNPs could be promising candidate to prevent microbial infections in wound, healing wound rapidly and inhibit the proliferation of apoptotic cells. Thus, CUR loaded CH/PEG/AgNPs could be a potential therapeutic agent with broad spectrum applications in the future. HighlightsA new approach was used to develop curcumin-loaded chitosan/poly(ethylene glycol)/AgNPs.The CUR-loaded CH/PEG/AgNPs were confirmed to be crystals by XRD analysis.The prepared CH/PEG/AgNPs were spherical and averaged 13.48 nm in size.The growth of S. aureus and E. coli were inhibited mostly by CH/PEG/AgNPs treatment.CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised mice.

Self-assembly in biobased nanocomposites for multifunctionality and improved performance

Concerns of petroleum dependence and environmental pollution prompt an urgent need for new sustainable approaches in developing polymeric products. Biobased polymers provide a potential solution, and biobased nanocomposites further enhance the performance and functionality of biobased polymers. Here we summarize the unique challenges and review recent progress in this field with an emphasis on self-assembly of inorganic nanoparticles. The conventional wisdom is to fully disperse nanoparticles in the polymer matrix to optimize the performance. However, self-assembly of the nanoparticles into clusters, networks, and layered structures provides an opportunity to address performance challenges and create new functionality in biobased polymers. We introduce basic assembly principles through both blending and in situ synthesis, and identify key technologies that benefit from the nanoparticle assembly in the polymer matrix. The fundamental forces and biobased polymer conformations are discussed in detail to correlate the nanoscale interactions and morphology with the macroscale properties. Different types of nanoparticles, their assembly structures and corresponding applications are surveyed. Through this review we hope to inspire the community to consider utilizing self-assembly to elevate functionality and performance of biobased materials. Development in this area sets the foundation for a new era of designing sustainable polymers in many applications including packaging, construction chemicals, adhesives, foams, coatings, personal care products, and advanced manufacturing.

Ag-Based Synergistic Antimicrobial Composites. A Critical Review

The emerging problem of the antibiotic resistance development and the consequences that the health, food and other sectors face stimulate researchers to find safe and effective alternative methods to fight antimicrobial resistance (AMR) and biofilm formation. One of the most promising and efficient groups of materials known for robust antimicrobial performance is noble metal nanoparticles. Notably, silver nanoparticles (AgNPs) have been already widely investigated and applied as antimicrobial agents. However, it has been proposed to create synergistic composites, because pathogens can find their way to develop resistance against metal nanophases; therefore, it could be important to strengthen and secure their antipathogen potency. These complex materials are comprised of individual components with intrinsic antimicrobial action against a wide range of pathogens. One part consists of inorganic AgNPs, and the other, of active organic molecules with pronounced germicidal effects: both phases complement each other, and the effect might just be the sum of the individual effects, or it can be reinforced by the simultaneous application. Many organic molecules have been proposed as potential candidates and successfully united with inorganic counterparts: polysaccharides, with chitosan being the most used component; phenols and organic acids; and peptides and other agents of animal and synthetic origin. In this review, we overview the available literature and critically discuss the findings, including the mechanisms of action, efficacy and application of the silver-based synergistic antimicrobial composites. Hence, we provide a structured summary of the current state of the research direction and give an opinion on perspectives on the development of hybrid Ag-based nanoantimicrobials (NAMs).

Antimicrobial Food Packaging with Biodegradable Polymers and Bacteriocins

Innovations in food and drink packaging result mainly from the needs and requirements of consumers, which are influenced by changing global trends. Antimicrobial and active packaging are at the forefront of current research and development for food packaging. One of the few natural polymers on the market with antimicrobial properties is biodegradable and biocompatible chitosan. It is formed as a result of chitin deacetylation. Due to these properties, the production of chitosan alone or a composite film based on chitosan is of great interest to scientists and industrialists from various fields. Chitosan films have the potential to be used as a packaging material to maintain the quality and microbiological safety of food. In addition, chitosan is widely used in antimicrobial films against a wide range of pathogenic and food spoilage microbes. Polylactic acid (PLA) is considered one of the most promising and environmentally friendly polymers due to its physical and chemical properties, including renewable, biodegradability, biocompatibility, and is considered safe (GRAS). There is great interest among scientists in the study of PLA as an alternative food packaging film with improved properties to increase its usability for food packaging applications. The aim of this review article is to draw attention to the existing possibilities of using various components in combination with chitosan, PLA, or bacteriocins to improve the properties of packaging in new food packaging technologies. Consequently, they can be a promising solution to improve the quality, delay the spoilage of packaged food, as well as increase the safety and shelf life of food.

Silver Nanoparticles on Chitosan/Silica Nanofibers: Characterization and Antibacterial Activity

A simple, low-cost, and reproducible method for creating materials with even silver nanoparticles (AgNP) dispersion was established. Chitosan nanofibers with silica phase (CS/silica) were synthesized by an electrospinning technique to obtain highly porous 3D nanofiber scaffolds. Silver nanoparticles in the form of a well-dispersed metallic phase were synthesized in an external preparation step and embedded in the CS/silica nanofibers by deposition for obtaining chitosan nanofibers with silica phase decorated by silver nanoparticles (Ag/CS/silica). The antibacterial activity of investigated materials was tested using Gram-positive and Gram-negative bacteria. The results were compared with the properties of the nanocomposite without silver nanoparticles and a colloidal solution of AgNP. The minimum inhibitory concentration (MIC) of obtained AgNP against Staphylococcus aureus (S. aureus) ATCC25923 and Escherichia coli (E. coli) ATCC25922 was determined. The physicochemical characterization of Ag/CS/silica nanofibers using various analytical techniques, as well as the applicability of these techniques in the characterization of this type of nanocomposite, is presented. The resulting Ag/CS/silica nanocomposites (Ag/CS/silica nanofibers) were characterized by small angle X-ray scattering (SAXS), X-ray diffraction (XRD), and atomic force microscopy (AFM). The morphology of the AgNP in solution, both initial and extracted from composite, the properties of composites, the size, and crystallinity of the nanoparticles, and the characteristics of the chitosan fibers were determined by electron microscopy (SEM and TEM).

Optimization of ZnAl/Chitosan Supra-Nano Hybrid Preparation as Efficient Antibacterial Material

The menace of antimicrobial resistance continues to increase and hence the need to discover new antibiotics, especially alternative and effective sources such as hybrid organic-inorganic, organic-organic materials, and other combinations. In this study, an antimicrobial hybrid supra-nano material was prepared by the bi-titration synthesis method of chitosan (CS) and ZnAl layered double hydroxide. Fourier-transform infrared spectrometer (FTIR), thermogravimetric and differential thermal gravimetric (TGA/DTG), ultraviolet-visible (UV-Vis), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses indicated that the ZnAl/CS hybrid exhibited low crystallinity with high thermal stability. The results of ZnAl/CS characterization showed the characteristic properties of the individual components ZnAl and CS, indicating a successful preparation of the ZnAl/CS hybrid. The antibacterial tests revealed that the ZnAl/CS hybrid possessed an enhanced antimicrobial effect against both Escherichia coli (E. coli, MTCC 739) and Penicilliumcyclopium (P. cyclopium, AS 3.4513). Under the central composite design (CCD) of the response surface methodology (RSM) tool, the parameters of the hybrid synthesis reaction were optimized and the result obtained was as follows: reaction pH was 11.3, reagent Zn/Al ratio was 3.27, and chitosan concentration was 1.07 g/L. After optimization, it was found that the antibacterial activity of ZnAl/CS was strengthened against E. coli as evidenced by a widening of the inhibition zone of about 41.6%. The antibacterial activity of ZnAl/CS was mainly due to the reactivation of the antibacterial activity of CS associated with the release of Zn²⁺ and Al³⁺ metal ions in addition to ZnO, Al₂O₃, and ZnAl₂O₄ compounds resulting from the method of preparation.

Preparation of the Hybrids of Hydrotalcites and Chitosan by Urea Method and Their Antimicrobial Activities

Hybrid nano-supra molecular structured materials can boost the functionalityof nano- or supra-molecular materials by providing increased reactivity and conductivity, or by simply improving theirmechanical stability. Herein, the studies in materials science exploring hybrid systems are investigated from the perspective of two important related applications: healthcare andfood safety.Interfacing phase strategy was applied, and ZnAl layered double hydroxide-chitosan hybrids, prepared by the urea method (U-LDH/CS), were successfully synthesized under the conditions of different chitosan(CS) concentrations with a Zn/Al molar ratio of 5.0. The structure and surface properties of the U-LDH/CS hybrids were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectrometer(FTIR), scanningelectronmicroscopy(SEM), ultravioletvisible(UV-Vis), and zero point charge (ZPC) techniques, where the effect of CS concentration on the structure and surface properties was investigated. The use of the U-LDH/CS hybrids as antimicrobial agents against Escherichia coli, Staphylococcus aureus,and Penicilliumcyclopiumwasinvestigated in order to clarify the relationship between microstructure and antimicrobial ability. The hybrid prepared in a CS concentration of 1.0 g∙L^-1 (U-LDH/CS₁) exhibited the best antimicrobial activity and exhibited average inhibition zones of 24.2, 30.4, and 22.3mm against Escherichia coli, Staphylococcus aureus, and Penicilliumcyclopium, respectively. The results showed that the appropriate addition of CS molecules could increase antimicrobial ability against microorganisms.

Biomaterials Based on Marine Resources for 3D Bioprinting Applications

Three-dimensional (3D) bioprinting has become a flexible tool in regenerative medicine with potential for various applications. Further development of the new 3D bioprinting field lies in suitable bioink materials with satisfied printability, mechanical integrity, and biocompatibility. Natural polymers from marine resources have been attracting increasing attention in recent years, as they are biologically active and abundant when comparing to polymers from other resources. This review focuses on research and applications of marine biomaterials for 3D bioprinting. Special attention is paid to the mechanisms, material requirements, and applications of commonly used 3D bioprinting technologies based on marine-derived resources. Commonly used marine materials for 3D bioprinting including alginate, carrageenan, chitosan, hyaluronic acid, collagen, and gelatin are also discussed, especially in regards to their advantages and applications.

Simultaneous green synthesis and in-situ impregnation of silver nanoparticles into organic nanofibers by Lythrum salicaria extract: Morphological, thermal, antimicrobial and release properties

This research has revealed the promising, green and one-pot approach for fabrication of antimicrobial nanohybrids based on organic nanofibers including cellulose (CNF), chitosan (CHNF), and lignocellulose (LCNF) nanofibers impregnated with silver nanoparticles (AgNPs). Lythrum salicaria extract was used as a reducing agent as well as a capping agent. Formation of the spherical AgNPs ranging between 45 and 65 nm was proved by UV-Vis spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Biomaterials supported AgNPs were characterized and compared for their morphological, thermal, release, and antimicrobial properties. The considerable influence of the phenolic compounds of L.salicaria extract on the synthesis and uniform distribution of AgNPs on nanofibers was confirmed by field emission electron microscopy (FE-SEM). Energy dispersive X-ray spectroscopy (EDX) and ICP-OES analysis of nanohybrids, reflected a high loading capacity for LCNF and also CHNF in contrast to CNF. The release of AgNPs from LCNF substrate was lower than other nanofibers but the order of antimicrobial activity of nanohybrids against E.coli and S.aureus was as this: CHNF ˃ LCNF ˃ CNF. Generally, this research suggested that the efficiency of CHNF and LCNF as immobilizing support of AgNPs is higher than CNF and L.salicaria extract was proposed as a high potential reducing and capping agent.

Fabrication of biopolymer based nanocomposite wound dressing: evaluation of wound healing properties and wound microbial load

The aim of this study is to introduce natural-based polymers, chitosan and starch, to design a remedial nanocomposite, comprising of cerium oxide nanoparticles and silver nanoparticles, to investigate their effects in accelerating wound healing and in wound microbial load. Cerium oxide nanoparticles synthesized in starch solution added to the colloidal dispersion of synthesized silver nanoparticles in chitosan to make a three-component nanomaterial. Mice were anaesthetized and two parallel full-thickness round wounds were excised under aseptic conditions with the help of sterile dermal biopsy punch. Furthermore, effects of silver-chitosan and silver-cerium-chitosan nanocomposite had evaluated on rate of wound closure and collagen density and on microbial load of wound in full-thickness model. Results showed that both silver chitosan and silver-cerium-chitosan had significant impact on acceleration of wound closure and collagen content and on reduction of wound microbial load in comparison with control group, which was, received no treatments. However, the silver-cerium-chitosan nanocomposite is more potent than silver-chitosan group and control group in wound closure. The wound healing effects of silver-cerium-chitosan nanocomposite are due to unique features of its three components and this nanocomposite promises impressive remedies for clinical application.

Chitosan Nanocomposite Coatings for Food, Paints, and Water Treatment Applications

Worldwide, millions of tons of crustaceans are produced every year and consumed as protein-rich seafood. However, the shells of the crustaceans and other non-edible parts constituting about half of the body mass are usually discarded as waste. These discarded crustacean shells are a prominent source of polysaccharide (chitin) and protein. Chitosan is a de-acetylated form of chitin obtained from the crustacean waste that has attracted attention for applications in food, biomedical, and paint industries due to its characteristic properties, like solubility in weak acids, film-forming ability, pH-sensitivity, biodegradability, and biocompatibility. We present an overview of the application of chitosan in composite coatings for applications in food, paint, and water treatment. In the context of food industries, the main focus is on fabrication and application of chitosan-based composite films and coatings for prolonging the post-harvest life of fruits and vegetables, whereas anti-corrosion and self-healing properties are the main properties considered for antifouling applications in paints in this review.

The Modification of In Situ SiOx Chitosan Coatings by ZnO/TiO2 NPs and Its Preservation Properties to Silver Carp Fish Balls

The composite chitosan coatings were prepared and characterized to evaluate their preservation properties for silver carp fish balls, and the microstructures and physicochemical properties of the coatings were improved by in situ nano silicon oxide (SiOx) and zinc oxide/titania (ZnO/TiO₂ ) nano-particles (NPs). In the chitosan coatings, when the chitosan combines with NPs by chemical bonds, the crystal lattice is slightly changed due to the modification of NPs. The chitosan coatings modified by NPs showed few cracks, among which sodium hexametaphosphate (SHMP) modified ZnO/TiO₂ /SiOx-chitosan (ZTS-CS) coating is proved to be the optimal one. The change of the freshness index and the texture of the fish balls are delayed by the coatings due to their gas permeability and antibacterial properties. The preservation properties of the chitosan coatings for Silver Carp fish balls are improved by in situ SiOx, and further improved by co-modification of ZnO/TiO₂ NPs. Furthermore, the surface modification of ZnO/TiO₂ NPs enhances the preservation properties of the chitosan coating. PRACTICAL APPLICATION: In our previous study, in situ SiOx was found to improve antibacterial and preservation properties of chitosan coating, leading to extending shelf time of Sciaenops ocellatus. In order to further improve properties of chitosan coatings, we added nontoxic edible nano materials to the in situ SiOx chitosan coatings. In situ SiOx modified by ZnO/TiO₂ NPs were synthesized, measured, and characterized in this study, and were applied for the preservation of silver carp fish balls. It could serve as a potential preservation material due to the increasing mechanical preservation properties. Through the results, the ZnO/TiO₂ /SiOx-chitosan (ZTS-CS) coatings have potential as application in the food industry to guarantee food quality and extend shelf life of products.

EGFR detection in extracellular vesicles of breast cancer patients through immunosensor based on silica-chitosan nanoplatform

In the present work, we designed a microfluidic electrochemical immunosensor with enough sensibility and precision to quantify epithermal growth factor receptor (EGFR) in plasma extracellular vesicles (EVs) of plasma from breast cancer patients. The sensor employs SiNPs coated with chitosan (SiNPs-CH) as reaction's platform, based on the covalently immobilization of monoclonal anti-EGFR on SiNPs-CH retained in the central channel (CC) of the microfluidic device. The synthetized SiNPs-CH were characterized by UV-visible spectroscopy (UV-visible), energy dispersive spectrometry (EDS), Nanoparticle Tracking Analysis (NTA) and transmission electron microscopy (TEM). EGFR was quantified by a direct sandwich immunoassay measuring through a horseradish peroxidase (HRP)-conjugated anti-EGFR. The enzymatic product (benzoquinone) was detected by reduction at - 100 mV on a sputtering gold electrode. The measured current was directly proportional to the level of EGFR in human serum samples. The linear range was from 0 ng mL^-1 to 50 ng mL^-1. The detection limit was 1.37 pg mL^-1, and the within- and between-assay coefficients of variation were below 6.25%. Finally, plasma samples from 30 early breast cancer patients and 20 healthy donor were analyzed by the novel method. EGFR levels in EVs (EVs-EGFR) were significantly higher than in the healthy control group (p = 0.002) and also, more sensitivity and specificity than normal serum markers like CEA and CA15.3 has been observed. EVs-EGFR concentration correlates with EGFR tumor status (p = 0.0003) as well as it correlate with the tumor size and pathological grade. To conclude, plasma EVs are suitable for proteomic characterization of cancer disease, as long as the employed method has sufficient sensitivity, like the case of immune-electrochemical nanosensors with incremented reaction surface.

Fluorometric 'switch-on' detection of heparin based on a system composed of rhodamine-labeled chitosan oligosaccharide lactate, and graphene oxide

A novel fluorescence 'Switch on' for the detection of heparin based on the RhB-COL/GO system was achieved. A strong fluorescence dye, Rhodamine B, was modified by chitosan oligosaccharide lactate (COL), which plays a major role in the formation of a positively charged RhB-COL complex. RhB-COL was soluble and stable in solution, which was characterized by using Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy. GO sheets quenched the fluorescence intensity of RhB-COL due to electron transfer from RhB to the GO surface. The decrease in fluorescence intensity of RhB-COL with increasing GO concentration was recorded using a Cary Eclipse fluorescence spectrophotometer. On the other hand, the addition of heparin replaced GO to bind with the RhB-COL surface via an electrostatic and noncovalent bond due to the abundant negative charge, which resulted in recovery of the fluorescence intensity. This RhB-COL/GO system possessed high selectivity and good sensitivity for the detection of heparin compared to other biomolecules, such as glycine, D-glucose, hyaluronic acid, L-glutamic acid, and ascorbic acid. The linear response toward heparin was measured over the range, 0-1.8 U · ml^-1, with a low detection limit of 0.04 U · ml^-1. The satisfactory sensing performance of RhB-COL/GO for heparin supports new 'switch-on' sensor applications in heparin-related biomedical detection.

Development of guar gum based active packaging films using grape pomace

The objective of this study was to develop biodegradable active film to improve the shelf-life of minimally processed fresh-produce. Guar gum (GG) based films with improved properties were fabricated by employing tween-80 (0.88%) as emulsifier, nanoclay (13.9%) as reinforcement, beeswax (1.21%) for hydrophobicity, glycerol (3.07%) as plasticizer, and grape pomace extract (5%) as active ingredient (%w/w of GG). Active films had a tensile strength of 122 MPa and water vapor transmission rate of 69 gm^-2d^-1. Films demonstrated significant antimicrobial activity against Escherichia coli, Staphylococcus aureus, Bacillus cereus, and Salmonella Typhimurium. The 2 kGy irradiated minimally processed pomegranate arils packed in film demonstrated a shelf-life of 12 days as compared to 4 days for unirradiated samples. The observed improvement in shelf-life was due to a radiation-induced release of antimicrobial volatiles from active films as confirmed by headspace analysis using GC-MS. Suitability of active films for food irradiation applications is thus demonstrated.

Nanosilver: new ageless and versatile biomedical therapeutic scaffold

Silver nanotechnology has received tremendous attention in recent years, owing to its wide range of applications in various fields and its intrinsic therapeutic properties. In this review, an attempt is made to critically evaluate the chemical, physical, and biological synthesis of silver nanoparticles (AgNPs) as well as their efficacy in the field of theranostics including microbiology and parasitology. Moreover, an outlook is also provided regarding the performance of AgNPs against different biological systems such as bacteria, fungi, viruses, and parasites (leishmanial and malarial parasites) in curing certain fatal human diseases, with a special focus on cancer. The mechanism of action of AgNPs in different biological systems still remains enigmatic. Here, due to limited available literature, we only focused on AgNPs mechanism in biological systems including human (wound healing and apoptosis), bacteria, and viruses which may open new windows for future research to ensure the versatile application of AgNPs in cosmetics, electronics, and medical fields.

In vitro evaluation of mucoadhesive and self-disinfection efficiency of (acrylic acid/polyethylene glycol)-silver nanocomposites for buccal drug delivery

A mucoadhesive drug delivery system can improve the effectiveness of a drug, allowing targeting and localization at a specific site. According to this assumption, γ-irradiation as eco-friendly technique was employed to synthesize (acrylic acid/polyethylene glycol) copolymer hydrogel of different compositions. Silver nanoparticles were prepared within (acrylic acid/polyethylene glycol) hydrogel network by means of in situ reduction of silver nitrate using sodium borohydride as a reducing agent. Swelling characteristics in distilled water and simulated saliva solution were studied as a function of copolymer composition and preparation irradiation dose. (Acrylic acid/polyethylene glycol) hydrogels and their developed Agº nanocomposites have been characterized using scanning electron microscope, thermogravimetric analysis, transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. Mucoadhesive strength as well as self-disinfection efficiency expressed as antibacterial activity against different bacterial strains was evaluated. Propranolol HCl as model drug was used to evaluate the potential efficiency of the obtained (acrylic acid/polyethylene glycol)-Agº nanocomposites as mucoadhesive drug carrier. The obtained results showed that the (acrylic acid/polyethylene glycol)-Agº nanocomposites show a promising self-disinfection property, and the propranolol HCl–loaded composites were able to deliver the loaded drug in a sustainable manner that lasts for about 600 min.

Photochemical synthesis of silver nanoparticles on chitosans/montmorillonite nanocomposite films and antibacterial activity

Silver nanoparticles (AgNPs) were synthetized on chitosans/montmorillonite nanocomposite films by photochemical method. Nanocomposites were prepared using chitosans with different molar masses and deacetylation degrees, as well as modified with diethylaminoethyl (DEAE) and dodecyl groups. AgNPs formation on the films was followed by the appearance of the plasmon band around 440nm as a function of irradiation time. TEM images revealed AgNPs with spherical morphology for all nanocomposites. For nanocomposites using modified chitosans, the AgNPs synthesis occurred quickly (1.5h) while for the others films it was above 11h. The film of modified chitosan with dodecyl and DEAE groups presented smaller and more uniform nanoparticles size along mixture of exfoliated and intercalated structures. This modified chitosan is an amphiphilic compound that can act controlling the size/shape of the AgNPs. The results of antibacterial activity suggested that all nanocomposite-AgNPs films inhibited the growth of Escherichia coli and Bacillus subtilis.

Chitosan Combined with ZnO, TiO₂ and Ag Nanoparticles for Antimicrobial Wound Healing Applications: A Mini Review of the Research Trends

Chitosan is a natural polymer that has been widely utilized for many purposes in the food, textile, agriculture, water treatment, cosmetic and pharmaceutical industries. Based on its characteristics, including biodegradability, non-toxicity and antimicrobial properties, it has been employed effectively in wound healing applications. Importantly, however, it is necessary to improve chitosan's capacities by combination with zinc oxide (ZnO), titanium dioxide (TiO₂) and silver (Ag) nanoparticles (NPs). In this review of many of the latest research papers, we take a closer look at the antibacterial effectiveness of chitosan combined with ZnO, TiO₂ and Ag NPs and also evaluate the specific wound healing application potentials.

Layer-by-layer assembly of Cu3(BTC)2 on chitosan non-woven fabrics: a promising haemostatic decontaminant composite material against sulfur mustard

Anchoring Cu₃(BTC)₂ on the surface of chitosan non-woven fabrics results in formation of a new haemostatic decontaminant composite materials.