Green Synthesis, Characterization and Uses of Palladium/Platinum Nanoparticles

Phytogenic-Mediated Zinc Oxide Nanoparticles Using the Seed Extract of Citrullus lanatus and Its Integrated Potency against Multidrug Resistant Bacteria

In the current research study, zinc oxide nanoparticles (ZnO-NPs) were synthesized via a green synthesis technique using the seed extract of Citrullus lanatus. The study further intended to evaluate the potential synergistic effects of ZnO-NPs with antibiotics against multidrug resistant (MDR) bacteria. It was observed that C. lanatus seed extracts obtained by n-hexane and methanolic solvents revealed the presence of constituents, such as tannins, flavonoids, and terpenoids. Furthermore, the extract of n-hexane displayed the strongest antibacterial activity against Yersinia species (17 ± 1.2 mm) and Escherichia coli (17 ± 2.6 mm), while the methanolic extract showed the maximum antibacterial activity against E. coli (17 ± 0.8 mm). Additionally, the ZnO-NP synthesis was confirmed by ultraviolet-visible analysis with a characteristic absorption peak at 280 nm. The Fourier transform infrared spectroscopy analysis suggested the absorption peaks in the 500-3800 cm-1 range, which corresponds to various groups of tertiary alcohol, aldehyde, amine, ester, aromatic compounds, thiol, amine salt, and primary amine. The scanning electron microscopy spectra of ZnO-NPs demonstrated the presence of zero-dimensional spherical particles with well-dispersed character. Moreover, encapsulation with ZnO-NPs improved the antimicrobial activity of antibiotics against the panel of MDR bacteria, and the increases in the effectiveness of particular antibiotics against MDR bacteria were significant (P = 0.0005). In essence, the synthesized ZnO-NPs have the potential as drug carriers with powerful bactericidal properties that work against MDR bacterial strains. These outcomes are an indication of such significance in pharmaceutical science, giving possibilities for further research and development in this field.

Oxali-palladium nanoparticle synthesis, characterization, protein binding, and apoptosis induction in colorectal cancer cells

This paper focuses on the synthesis of nano-oxali-palladium coated with turmeric extract (PdNPs) using a green chemistry technique based on the reduction in the Pd (II) complex by phytochemicals inherent in turmeric extract. PdNPs were examined and characterized using Field Emission Scanning Electron Microscopy (FESEM), Dynamic Light Scattering (DLS), Fourier Transform Infrared (FTIR), and Atomic Force Microscopy (AFM). Using different spectroscopic and molecular dynamics simulations, a protein-binding analysis of the produced nanoparticle was conducted by observing its interaction with human serum albumin (HSA). Lastly, the cytotoxic effects and apoptotic processes of PdNPs were studied against the HCT116 human colorectal cell line using the MTT assay and flow cytometry tests. According to the findings, PdNPs with spherical and homogenous morphology and a size smaller than 100 nm were generated. In addition, they can induce apoptosis in colorectal cancer cells in a dose-dependent manner with a lower Cc50 (78 µL) than cisplatin and free oxali-palladium against HCT116 cells. The thermodynamic characteristics of protein binding of nanoparticles with HSA demonstrated that PdNPs had a great capacity for quenching and interacting with HSA through hydrophobic forces. In addition, molecular dynamics simulations revealed that free oxali-palladium and PdNP attach to the same area of HSA via non-covalent interactions. It is conceivable to indicate that the synthesized PdNPs are a potential candidate for the construction of novel, nature-based anticancer treatments with fewer side effects and a high level of eco-friendliness.

One-pot green bio-assisted synthesis of highly active catalytic palladium nanoparticles in porcine gastric mucin for environmental applications

In this work, palladium nanoparticles were synthesized using one-pot synthesis utilizing porcine gastric mucin glycoproteins as reducing and capping agents. It is shown that the particles exhibited noticeable catalytic activity through both nitrophenol reduction and Suzuki-Miyaura coupling reactions. The catalytic performance was demonstrated with exceptionally high product yield, a fast reaction rate, and low catalyst use. The palladium-mucin composites obtained could be used in particle solution and as hydrogel catalysts to increase their reusability for at least ten reaction cycles with minimum loss in their catalytic effectiveness.

An overview of biogenic metallic nanoparticles for water treatment and purification: the state of the art

The environment is fundamental to human existence, and protecting it from dangerous contaminants should be a top priority for all stakeholders. Reducing garbage output has helped, but as the world's population grows, more waste will be generated. Tons of waste inadvertently and advertently received by environmental matrixes adversely affect the sustainable environment. The pollution caused by these activities affects the environment and human health. Conventional remediation processes ranging from chemical, physical, and biological procedures use macroaggregated materials and microorganisms to degrade or remove pollutants. Undesirable limitations of expensiveness, disposal challenges, maintenance, and formation of secondary contaminants abound. Additionally, multiple stages of treatments to remove different contaminants are time-consuming. The need to avoid these limitations and shift towards sustainable approaches brought up nanotechnology options. Currently, nanomaterials are being used for environmental rejuvenation that involves the total degradation of pollutants without secondary pollution. As nanoparticles are primed with vast and modifiable reactive sites for adsorption, photocatalysis, and disinfection, they are more useful in remediating pollutants. Review articles on metallic nanoparticles usually focus on chemically synthesized ones, with a particular focus on their adsorption capacity and toxicities. Therefore, this review evaluates the current status of biogenic metallic nanoparticles for water treatment and purification.

Biocompatible Palladium Nanoparticles Prepared Using Vancomycin for Colorimetric Detection of Hydroquinone

Hydroquinone poses a major threat to human health and is refractory to degradation, so it is important to establish a convenient detection method. In this paper, we present a novel colorimetric method for the detection of hydroquinone based on a peroxidase-like Pd nanozyme. The vancomycin-stabilized palladium nanoparticles (Van-Pd_n NPs, n = 0.5, 1, 2) were prepared using vancomycin as a biological template. The successful synthesis of Van-Pd_n NPs (n = 0.5, 1, 2) was demonstrated by UV-vis spectrophotometry, transmission electron microscopy, and X-ray diffraction. The sizes of Pd nanoparticles inside Van-Pd_0.5 NPs, Van-Pd₁ NPs, and Van-Pd₂ NPs were 2.6 ± 0.5 nm, 2.9 ± 0.6 nm, and 4.3 ± 0.5 nm, respectively. Furthermore, Van-Pd₂ NPs exhibited excellent biocompatibility based on the MTT assay. More importantly, Van-Pd₂ NPs had good peroxidase-like activity. A reliable hydroquinone detection method was established based on the peroxidase-like activity of Van-Pd₂ NPs, and the detection limit was as low as 0.323 μM. Therefore, vancomycin improved the peroxidase-like activity and biocompatibility of Van-Pd₂ NPs. Van-Pd₂ NPs have good application prospects in the colorimetric detection of hydroquinone.

Nanotechnology-General Aspects: A Chemical Reduction Approach to the Synthesis of Nanoparticles

The role of nanotechnology is increasingly important in our society. Through it, scientists are acquiring the ability to understand the structure and properties of materials and manipulate them at the scale of atoms and molecules. Nanomaterials are at the forefront of the rapidly growing field of nanotechnology. The synthesis of nanostructured materials, especially metallic nanoparticles, has attracted tremendous interest over the past decade due to their unique properties, making these materials excellent and indispensable in many areas of human activity. These special properties can be attributed to the small size and large specific surface area of nanoparticles, which are very different from those of bulk materials. Nanoparticles of different sizes and shapes are needed for many applications, so a variety of protocols are required to produce monodisperse nanoparticles with controlled morphology. The purpose of this review is firstly to introduce the reader to the basic aspects related to the field of nanotechnology and, secondly, to discuss metallic nanoparticles in greater detail. This article explains the basic concepts of nanotechnology, introduces methods for synthesizing nanoparticles, and describes their types, properties, and possible applications. Of many methods proposed for the synthesis of metal nanoparticles, a chemical reduction is usually preferred because it is easy to perform, cost-effective, efficient, and also allows control of the structural parameters through optimization of the synthesis conditions. Therefore, a chemical reduction method is discussed in more detail-each factor needed for the synthesis of nanoparticles by chemical reduction is described in detail, i.e., metal precursors, solvents, reducing agents, and stabilizers. The methods that are used to characterize nanomaterials are described. Finally, based on the available literature collection, it is shown how changing the synthesis parameters/methods affects the final characteristics of nanoparticles.

A review on nanoparticles: characteristics, synthesis, applications, and challenges

The significance of nanoparticles (NPs) in technological advancements is due to their adaptable characteristics and enhanced performance over their parent material. They are frequently synthesized by reducing metal ions into uncharged nanoparticles using hazardous reducing agents. However, there have been several initiatives in recent years to create green technology that uses natural resources instead of dangerous chemicals to produce nanoparticles. In green synthesis, biological methods are used for the synthesis of NPs because biological methods are eco-friendly, clean, safe, cost-effective, uncomplicated, and highly productive. Numerous biological organisms, such as bacteria, actinomycetes, fungi, algae, yeast, and plants, are used for the green synthesis of NPs. Additionally, this paper will discuss nanoparticles, including their types, traits, synthesis methods, applications, and prospects.

Ultra-Small Silver Nanoparticles: A Sustainable Green Synthesis Approach for Antibacterial Activity

The present study centers on the synthesis of ultra-small silver nanoparticles (AgNPs) with antibacterial properties using citrus peel residues (orange, lemon, and grapefruit) as reducing and stabilizing agents, and on assessing their antibacterial activity against multidrug-resistant clinical Staphylococcus aureus. The synthesized AgNPs were analyzed by various techniques, including UV-Vis spectroscopy, SAED, TEM, XRD, FTIR, and Raman. The results demonstrate the formation of ultra-small, monodisperse, quasi-spherical AgNPs with an average particle size of 2.42 nm for AgNPs produced with mixed extracts. XRD analysis indicated that the AgNPs have a crystal size of 9.71 to 16.23 nm. The AgNPs exhibited potent inhibitory activity against resistant S. aureus, with a minimum inhibitory concentration (MIC) of 15.625 to 62.50 ppm. The findings suggest that the ultra-small nanometer size of the AgNPs could be attributed to the synthesis method that employs ambient conditions and the presence of polyphenolic compounds from citrus peel. Consequently, AgNPs obtained through sustainable green synthesis hold significant potential in combating clinical multi-resistant bacterial strains that are challenging to treat and eradicate. This approach also contributes to the revaluation of citrus residues in the region, which is an ongoing environmental issue today.

Pd-Based Hybrid Nanoparticles As Multimodal Theranostic Nanomedicine

A nanodelivery system based on palladium nanoparticles (PdNP) and cisplatin (CisPt) was developed by physisorption of the drug onto the PdNP synthesized via a green redox process, using d-glucose and polyvinylpyrrolidone (PVP) as reducing and stabilizing/capping agents, respectively. UV-vis analysis and H₂-evolution measurements were carried out to prove the nanoparticles' capability to act as bimodal theranostic nanomedicine, i.e., having both plasmonic and photocatalytic properties. XPS, XRD, and TEM allowed light to be shed on the chemical composition and morphology of the PdNP. The analysis of the UV-visible spectra evidenced plasmonic peak changes for the hybrid nanoparticle-drug assembly (Pd@CisPt), which pointed to a significant interaction of CisPt with the NP surface. The drug loading was quantitatively estimated by ICP-OES measurements, while DLS and AFM confirmed the strong association of the drug with the nanoparticle surface. The test of SOD-like activity in a cell-free environment proved the maintenance of the antioxidant capability of PdNP also in the Pd@CisPt systems. Finally, Pd@CisPt tested in prostate cancer cells (PC-3 line) unveiled the antitumoral action of the developed nanomedicine, related to reactive oxygen species (ROS) generation, with a condition of protein misfolding/unfolding and DNA damage, as evidenced by cytotoxicity and MitoSOX assays, as well as Raman microspectroscopy, respectively. Cell imaging by confocal microscopy evidenced cellular uptake of the nanoparticles, as well as dynamic processes of copper ion accumulation at the level of subcellular compartments. Finally, cell migration studies upon treatment with Pd@CisPt evidenced a tunable response between the inhibitory effect of CisPt and the enhanced rate of cell migration for the metal NP alone, which pointed out the promising potential of the developed theranostic nanomedicine in tissue regeneration.

Adsorption and removal of ethidium bromide from aqueous solution using optimized biogenic catalytically active antibacterial palladium nanoparticles

Due to being low cost and eco-friendly, biological nanomaterial synthesis and development have made broad spectral progress. This study aimed to optimize the phytomediated synthesis of catalytically active, antibacterial palladium nanoparticles (PdNPs) for adsorption-based removal of ethidium bromide (EtBr) from an aqueous solution. Optimization of synthesis demonstrated that a precursor to extract ratio of 4:1, pH 3, and incubation at 80 °C for 60 min were the optimum conditions that led to the synthesis of negatively charged, highly stable, polycrystalline, spherical, and monodispersed PdNPs of 5-10 nm. When tested as catalysts, PdNPs successfully catalyzed Suzuki-Miyaura cross-coupling between aryl halides and arylboronic acids resulting in the synthesis of 4-acetylbiphenyl. Furthermore, the antibacterial activity test demonstrated that biogenic PdNPs were most effective and potent against Staphylococcus aureus and Proteus vulgaris followed by Escherichia coli, Bacillus subtilis, and Bacillus cereus. In addition, PdNPs were found as an excellent adsorbent for adsorption of EtBr from water as the adsorption reaction obeyed pseudo-second-order kinetics with a linear regression coefficient (R² > 0.995). The adsorption reaction fitted well with the Freundlich and Temkin isotherm models, indicating multi-layer adsorption. Estimating thermodynamic parameters resulted in a positive value of ΔH⁰ and ΔG⁰, demonstrating adsorption was non-spontaneous and endothermic.

An effective bio-inspired synthesis of platinum nanoparticles using Caulerpa sertularioides and investigating their antibacterial and antioxidant activities

In this study, we report the synthesis of platinum nanoparticles (Cs-PtNPs) using an aqueous extract of Caulerpa sertularioides as a reducing agent. Cs-PtNPs were characterized by UV-Vis spectroscopy, fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDAX), high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS) analysis. Cs-PtNPs are spherical with a particle size of 6-22 nm. Cs-PtNPs have been shown to have highly effective antioxidant activities with 74% for DPPH, 63% for reducing power, and 59% for total antioxidant at 1 mg/ml, and results were compared with standard L-ascorbic acid. Furthermore, the Cs-PtNPs demonstrated excellent antibacterial activity against the Gram-negative bacteria, Vibrio parahaemolyticus with the highest zone of inhibition (18 mm) at 50 µg/ml. Moreover, Artemia nauplii showed less toxicity when treated with Cs-PtNPs at 150 µg/ml, indicating that the Cs-PtNPs are less toxic and environment friendly.

Nanoclay-based conductive and electromagnetic interference shielding properties of silver-decorated polyaniline and its nanocomposites

Polymer composite materials have seen rapid growth in popularity over the past two decades due to their ability to successfully combine the benefits of several different polymer composites into a single product.

In vitro Evaluation of Antibacterial Activity of Synthetic Zeolite Supported AgZno Nanoparticle Against a Selected Group of Bacteria

Background

The development of novel and intriguing nanoparticle (NP)-based materials with antibacterial activity has recently received attention due to the problem of bacterial resistance to conventional antibiotics becoming more and more frequent. Thus, this study aimed to investigate the antibacterial effectiveness of a synthetic zeolite-supported AgZnO nanoparticle against selected bacteria in vitro.

Methods

Using the disc diffusion method, the antibacterial activity of synthetic zeolite-supported AgZnO nanoparticles was assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Zinc oxide (ZnO) and Ag/ZnO nanoparticles were used to create the zeolite-supported Ag/ZnO composite. Chloramphenicol was used as a standard drug. The nanoparticles and composites were characterized using powder X-ray diffraction (XRD), Fourier transform infrared (FTIR), and atomic absorption spectroscopy (AAS).

Results

Synthetic zeolite-supported AgZnO nanoparticles showed promising antibacterial properties with the largest zone of inhibition against S. aureus bacteria in comparison to E. coli. The synthetic zeolite-supported AgZnO nanoparticle displayed a zone of inhibition against S. aureus and E. coli without a remarkable difference compared to the respective standard drug (Chloramphenicol). Zinc peaks were visible in the X-ray diffractograms, which supported the theory that the characteristic hexagonal wurtzite structure of zinc oxide was present.

Conclusion

All types of ZnO, AgZnO, and AgZnO-Zeolite showed wide-spectrum activity with better effect against gram-positive bacteria, while the Zeolite-Ag/ZnO composite showed even better antibacterial activity. The findings suggest a potential bactericide that needs further evaluation in future studies was observed in synthetic zeolite-supported Ag/ZnO nanoparticles.

Green Synthesis of Platinum Nanoparticles for Biomedical Applications

The diverse biological properties of platinum nanoparticles (PtNPs) make them ideal for use in the development of new tools in therapy, diagnostics, and other biomedical purposes. "Green" PtNPs synthesis is of great interest as it is eco-friendly, less energy-consuming and minimizes the amount of toxic by-products. This review is devoted to the biosynthesis properties of platinum nanoparticles based on living organisms (bacteria, fungi, algae, and plants) use. The participation of various biological compounds in PtNPs synthesis is highlighted. The biological activities of "green" platinum nanoparticles (antimicrobial, anticancer, antioxidant, etc.), the proposed mechanisms of influence on target cells and the potential for their further biomedical application are discussed.

Recent progress in bio-mediated synthesis and applications of engineered nanomaterials for sustainable agriculture

The ever-increasing demand for agricultural food products, medicine, and other commercial sectors requires new technologies for agricultural practices and promoting the optimum utilization of natural resources. The application of engineered nanomaterials (ENMs) enhance the biomass production and yield of food crop while resisting harmful environmental stresses. Bio-mediated synthesis of ENMs are time-efficient, low-cost, environmentally friendly, green technology. The precedence of using a bio-mediated route over conventional precursors for ENM synthesis is non-toxic and readily available. It possesses many active agents that can facilitate the reduction and stabilization processes during nanoparticle formation. This review presents recent developments in bio-mediated ENMs and green synthesis techniques using plants, algae, fungi, and bacteria, including significant contributions to identifying major ENM applications in agriculture with potential impacts on sustainability, such as the role of different ENMs in agriculture and their impact on different plant species. The review also covers the advantages and disadvantages of different ENMs and potential future research in this field.

Electrochemical Metal Recycling: Recovery of Palladium from Solution and In Situ Fabrication of Palladium-Carbon Catalysts via Impact Electrochemistry

Recycling of critical materials, regeneration of waste, and responsible catalyst manufacture have been repeatedly documented as essential for a sustainable future with respect to the environment and energy production. Electrochemical methods have become increasingly recognized as capable of achieving these goals, and “impact” electrochemistry, with the advantages associated with dynamic nanoelectrodes, has recently emerged as a prime candidate for the recovery of metals from solution. In this report, the nanoimpact technique is used to generate carbon-supported palladium catalysts from low-concentration palladium(II) chloride solutions (i.e., a waste stream mimic) as a proof of concept. Subsequently, the catalytic properties of this material in both synthesis (Suzuki coupling reaction) and electrocatalysis (hydrogen evolution) are demonstrated. Transient reductive impact signals are shown and analyzed at potentials negative of +0.4 V (vs SCE) corresponding to the onset of palladium deposition in traditional voltammetry. Direct evidence of Pd modification was obtained through characterization by environmental scanning electron microscopy/energy-dispersive X-ray spectroscopy, inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy, transmission electron microscopy, and thermogravimetric analysis of impacted particles. This showed the formation of deposits of Pd0 partially covering the 50 nm carbon black particles with approximately 14% Pd (wt %) under the conditions used. This material was then used to demonstrate the conversion of iodobenzene into its biphenyl product (confirmed through nuclear magnetic resonance) and the successful production of hydrogen as an electrocatalyst under acidic conditions (under cyclic voltammetry).

Extraction and Complexation Investigation of Palladium(II) by a Nitrilotriacetate-Derived Triamide Ligand

Effective and selective separation and recovery of the fission product palladium from high-level liquid waste are conducive not only to reducing its hazards to the public health and environment but also to alleviate the pressure on the increasing demand for natural palladium. Herein, the Pd²⁺ extraction in an HNO₃ solution with a nitrilotriacetate-derived triamide ligand NTAamide(n-Oct) and the complexation between them were investigated. Using n-octanol as a diluent, NTAamide(n-Oct) demonstrated an excellent selectivity, strong extractability, and high loading capacity for Pd²⁺ extraction. Combined with the results of single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, electrospray ionization-mass spectroscopy, microcalorimetric titration, and slope analysis, the extracted complexes were determined as [PdL₂](NO₃)₂ and [PdL₂][Pd(NO₃)₄] (where L denotes the NTAamide ligand) in 0.10 and 3.0 mol/L HNO₃ solutions, respectively. The extraction model closely depended on the solvation state of Pd²⁺ in the HNO₃ solution. An ion-pair extraction model was proposed and discussed.

An Overview of the Importance of Transition-Metal Nanoparticles in Cancer Research

Several authorities have implied that nanotechnology has a significant future in the development of advanced cancer therapies. Nanotechnology makes it possible to simultaneously administer drug combinations and engage the immune system to fight cancer. Nanoparticles can locate metastases in different organs and deliver medications to them. Using them allows for the effective reduction of tumors with minimal toxicity to healthy tissue. Transition-metal nanoparticles, through Fenton-type or Haber-Weiss-type reactions, generate reactive oxygen species. Through oxidative stress, the particles induce cell death via different pathways. The main limitation of the particles is their toxicity. Certain factors can control toxicity, such as route of administration, size, aggregation state, surface functionalization, or oxidation state. In this review, we attempt to discuss the effects and toxicity of transition-metal nanoparticles.

Biosynthesis and antibacterial activity of manganese oxide nanoparticles prepared by green tea extract

•

Manganese oxide nanoparticle (MnO NPs) successfully synthesized and confirmed by many techniques.

•

The characteristic nanoparticles properties of MnO NP were proved by UV–Vis, XRD and FTIR. The shape and size of MnO NPs were demonstrated by SEM equipment.

•

MnO NP exhibited strong antibacterial activity when scanned against pathogenic bacteria.

Amongst chemical and physical techniques, the biosynthesis method of metal nanoparticles has received the interest of many researchers owing to its environmental safety, simplicity and inexpensiveness. Manganese oxide nanoparticles (MnO NPs) were successfully synthesised using green tea extract as the reducing agent and characterised by UV–Vis spectroscopy, X-ray diffractometry and Fourier transform infrared spectroscopy. The shape and size of the MnO NPs were obtained by scanning electron microscopy. The size of the MnO NPs was 20–30 nm. The MnO NPs exhibited strong antibacterial activity against pathogenic bacteria, namely, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa, with inhibition zones of 12, 14 and 18 mm, respectively. Moreover, the minimum inhibitory concentration (MIC) of the MnO NPs was 12.5 U/mL as determined by resazurin microtitre assay. The activities of some antibiotics remarkably increased when combined with MnO NPs (at MIC).

Plant Extract-Based Synthesis of Metallic Nanomaterials, Their Applications, and Safety Concerns

Nanotechnology has attracted the attention of researchers from different scientific fields because of the escalated properties of nanomaterials compared with the properties of macromolecules. Nanomaterials can be prepared through different approaches involving physical and chemical methods. The development of nanomaterials through plant-based green chemistry approaches is more advantageous than other methods from the perspectives of environmental safety, animal, and human health. The biomolecules and metabolites of plants act as reducing and capping agents for the synthesis of metallic green nanomaterials. Plant-based synthesis is a preferred approach as it is not only cost-effective, easy, safe, clean, and eco-friendly but also provides pure nanomaterials in high yield. Since nanomaterials have antimicrobial and antioxidant potential, green nanomaterials synthesized from plants can be used for a variety of biomedical and environmental remediation applications. Past studies have focused mainly on the overall biogenic synthesis of individual or combinations of metallic nanomaterials and their oxides from different biological sources, including microorganisms and biomolecules. Moreover, from the viewpoint of biomedical applications, the literature is mainly focusing on synthetic nanomaterials. Herein, we discuss the extraction of green molecules and recent developments in the synthesis of different plant-based metallic nanomaterials, including silver, gold, platinum, palladium, copper, zinc, iron, and carbon. Apart from the biomedical applications of metallic nanomaterials, including antimicrobial, anticancer, diagnostic, drug delivery, tissue engineering, and regenerative medicine applications, their environmental remediation potential is also discussed. Furthermore, safety concerns and safety regulations pertaining to green nanomaterials are also discussed. This article is protected by copyright. All rights reserved.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Ecotoxicological Effects of Bimetallic PdNi/MWCNT and PdCu/MWCNT Nanoparticles onto DNA Damage and Oxidative Stress in Earthworms

Bimetallic nanoparticles are synthesized using two different metal elements and used recently in many fields. However, limited studies related to the ecotoxic effects of nanoparticles available in the literature. The purpose of this study is to synthesize and characterize bimetallic PdCu/MWCNT and PdNi/MWCNT NPs and investigate their ecotoxic effects on earthworms. For this purpose, we injected approximately 20 µL of various concentrations of bimetallic PdCu/MWCNT and PdNi/MWCNT NPs (1, 10, 100, 1000, and 2000 mg/L) into the coelomic space of earthworms. We evaluated survival rate, malformations, reactive oxygen species (ROS) level, 8-OHdG content, and histopathological changes in earthworms at the 48th hour after exposure. PdCu/MWCNT and PdNi/MWCNT NPs were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD) pattern, and Raman-scattering spectroscopy. Toxicological examinations showed that PdCu/MWCNT NPs reduced the survival rate of earthworms (2000 mg/L, 84%) and caused various malformations (various lesions, thinning, swelling, and rupture), but nonsignificant effects of survival rate and malformations were observed in earthworms using PdNi/MWCNT NPs. The histopathological examinations of earthworm tissues exposed with PdNi/MWCNT determined that tissues in all treatment groups had a normal histological appearance. However, at a concentration of 2000 mg/L of PdCu/MWCNT NPs, atrophy in the longitudinal muscle layer and less degenerative cells in the epidermis layer were observed in earthworm tissues. It was determined that PdNi/MWCNT and PdCu/MWCNT NPs caused significant increases in ROS levels and 8-OHdG activity in earthworm tissues after 48 h. Finally, our results demonstrated that the toxicity of PdNi/MWCNT NPs was detected to be lower than PdCu/MWCNT NPs. However, both nanoparticles may pose a toxicological risk at high concentrations (1000 and 2000 mg/L). These findings will provide valuable information to studies on the use of PdNi/MWCNT NPs in wastewater treatment systems, industrial and medical fields, which have been determined to have less ecotoxicological risk.

Facile deposition of palladium oxide (PdO) nanoparticles on CoNi2S4microstructures towards enhanced oxygen evolution reaction

Strong demand for renewable energy resources and clean environments have inspired scientists and researchers across the globe to carry out research activities on energy provision, conversion, and storage devices. In this context, development of outperform, stable, and durable electrocatalysts has been identified as one of the major objectives for oxygen evolution reaction (OER). Herein, we offer facile approach for the deposition of few palladium oxide (PdO) nanoparticles on the cobalt-nickel bi-metallic sulphide (CoNi₂S₄) microstructures represented as PdO@ CoNi₂S₄using ultraviolet light (UV) reduction method. The morphology, crystalline structure, and chemical composition of the as-prepared PdO@ CoNi₂S₄composite were probed through scanning electron microscopy, powder x-ray diffraction, high resolution transmission electron microscopy, energy dispersive spectroscopy and x-ray photoelectron spectroscopy techniques. The combined physical characterization results revealed that ultraviolet light (UV) light promoted the facile deposition of PdO nanoparticles of 10 nm size onto the CoNi₂S₄and the fabricated PdO@ CoNi₂S₄composite has a remarkable activity towards OER in alkaline media. Significantly, it exhibited a low onset potential of 1.41 V versus reversible hydrogen electrode (RHE) and a low overpotential of 230 mV at 10 mA cm^-2. Additionally, the fabricated PdO@ CoNi₂S₄composite has a marked stability of 45 h. Electrochemical impedance spectroscopy has shown that the PdO@CoNi₂S₄composite has a low charge transfer resistance of 86.3 Ohms, which favours the OER kinetics. The PdO@ CoNi₂S₄composite provided the multiple number of active sites, which favoured the enhanced OER activity. Taken together, this new class of material could be utilized in energy conversion and storage as well as sensing applications.

Green Nanotechnology: Plant-Mediated Nanoparticle Synthesis and Application

The key pathways for synthesizing nanoparticles are physical and chemical, usually expensive and possibly hazardous to the environment. In the recent past, the evaluation of green chemistry or biological techniques for synthesizing metal nanoparticles from plant extracts has drawn the attention of many researchers. The literature on the green production of nanoparticles using various metals (i.e., gold, silver, zinc, titanium and palladium) and plant extracts is discussed in this study. The generalized mechanism of nanoparticle synthesis involves reduction, stabilization, nucleation, aggregation and capping, followed by characterization. During biosynthesis, major difficulties often faced in maintaining the structure, size and yield of particles can be solved by monitoring the development parameters such as temperature, pH and reaction period. To establish a widely accepted approach, researchers must first explore the actual process underlying the plant-assisted synthesis of a metal nanoparticle and its action on others. The green synthesis of NPs is gaining attention owing to its facilitation of the development of alternative, sustainable, safer, less toxic and environment-friendly approaches. Thus, green nanotechnology using plant extract opens up new possibilities for the synthesis of novel nanoparticles with the desirable characteristics required for developing biosensors, biomedicine, cosmetics and nano-biotechnology, and in electrochemical, catalytic, antibacterial, electronics, sensing and other applications.

Comparative assessment of the fate and toxicity of chemically and biologically synthesized silver nanoparticles to juvenile clams

Nanoparticles (NPs) can be produced via physical, chemical, or biological approaches. Yet, the impact of the synthesis approaches on the environmental fate and effects of NPs is poorly understood. Here, we synthesized AgNPs through chemical and biological approaches (cit-AgNPs and bio-AgNPs), characterized their properties, and toxicities relative to commercially available Ag nanopowder (np-AgNPs) to the clam Mercenaria mercenaria. The chemical synthesis is based on the reduction of ionic silver using sodium borohydride as a reducing agent and trisodium citrate as a capping agent. The biological synthesis is based on the reduction of ionic silver using biomolecules extracted from an atoxigenic strain of a filamentous fungus Aspergillus parasiticus. The properties of AgNPs were determined using UV-vis, dynamic light scattering, laser Doppler electrophoresis, (single particle)-inductively coupled plasma-mass spectroscopy, transmission electron microscopy, and asymmetric flow-field flow fractionation. Both chemical and biological synthesis approaches generated spherical AgNPs. The chemical synthesis produced AgNPs with narrower size distributions than those generated through biological synthesis. The polydispersity of bio-AgNPs decreased with increases in cell free extract (CFE):Ag ratios. The magnitude of the zeta potential of the cit-AgNPs was higher than those of bio-AgNPs. All AgNPs formed aggregates in the test media i.e., natural seawater. Based on the same total Ag concentrations, all AgNPs were less toxic than AgNO₃. The toxicity of AgNPs toward the juvenile clam, Mercenaria mercenaria, decreased following the order np-AgNPs > cit-AgNPs > bio-AgNPs. Expressed as a function of dissolved Ag concentrations, the toxicity of Ag decreased following the order cit-AgNPs > bio-AgNPs > AgNO₃ ~ np-AgNPs. Therefore, the toxicity of AgNP suspensions can be attributed to a combined effect of dissolved and particulate Ag forms. These results indicate that AgNP synthesis methods determine their environmental and biological behaviors and should be considered for a more comprehensive environmental risk assessment of AgNPs.

Green Synthesis of Pd Nanoparticles for Sustainable and Environmentally Benign Processes

Among transition metal nanoparticles, palladium nanoparticles (PdNPs) are recognized for their high catalytic activity in a wide range of organic transformations that are of academic and industrial importance. The increased interest in environmental issues has led to the development of various green approaches for the preparation of efficient, low-cost and environmentally sustainable Pd-nanocatalysts. Environmentally friendly solvents, non-toxic reducing reagents, biodegradable capping and stabilizing agents and energy-efficient synthetic methods are the main aspects that have been taken into account for the production of Pd nanoparticles in a green approach. This review provides an overview of the fundamental approaches used for the green synthesis of PdNPs and their catalytic application in sustainable processes as cross-coupling reactions and reductions with particular attention afforded to the recovery and reuse of the palladium nanocatalyst, from 2015 to the present.

Enthralling the impact of engineered nanoparticles on soil microbiome: A concentric approach towards environmental risks and cogitation

Nanotechnology is an avant-garde field of scientific research that revolutionizes technological advancements in the present world. It is a cutting-edge scientific approach that has undoubtedly a plethora of functions in controlling environmental pollutants for the welfare of the ecosystem. However, their unprecedented utilization and hysterical release led to a huge threat to the soil microbiome. Nanoparticles(NPs) hamper physicochemical properties of soil along with microbial metabolic activities within rhizospheric soils.Here in this review shed light on concentric aspects of NP-biosynthesis, types, toxicity mechanisms, accumulation within the ecosystem. However, the accrual of tiny NPs into the soil system has dramatically influenced rhizospheric activities in terms of soil properties and biogeochemical cycles. We have focussed on mechanistic pathways engrossed by microbes to deal with NPs.Also, we have elaborated the fate and behavior of NPs within soils. Besides, a piece of very scarce information on NPs-toxicity towards environment and rhizosphere communities is available. Therefore, the present review highlights ecological perspectives of nanotechnology and solutions to such implications. We have comprehend certain strategies such as avant-garde engineering methods, sustainable procedures for NP synthesis along with vatious regulatory actions to manage NP within environment. Moreover, we have devised risk management sustainable and novel strategies to utilize it in a rationalized and integrated manner. With this background, we can develop a comprehensive plan about NPs with novel insights to understand the resistance and toxicity mechanisms of NPs towards microbes. Henceforth, the orientation towards these issues would enhance the understanding of researchers for proper recommendation and promotion of nanotechnology in an optimized and sustainable manner.

Phytoassisted synthesis and characterization of palladium nanoparticles (PdNPs); with enhanced antibacterial, antioxidant and hemolytic activities

With increasing demand for the treatment of microbial resistance around the globe, it is necessary to develop metallic nanoparticles , ideally by the use of nontoxic medium i.e. plant constituents, that could arrest the microbial growth. For this reason, small and highly crystalline PdNPs were effectively synthesized by using Eryngium caeruleum leaf extract as both the reducing and capping agent. During the synthesis of PdNPs, the size and shape were made controlled by using different solvents i.e., ethanol, methanol and aqueous extract of Eryngium caeruleum. A series of physicochemical characterizations were applied to inquire the synthesis, crystal structure, particles size, and surface morphology of PdNPs. Furthermore, the PdNPs demonstrated excellent potential for the inactivation of gram-positive and gram-negative bacteria, where the methanol-PdNPs exhibited maximum growth inhibition zones against tested bacteria as compared to ethanol-PdNPs and aqueous-PdNPs. Besides, PdNPs showed better antioxidant activity to effectively scavenge 2, 2 diphenyl-1-picrylhydrazyl (DPPH). More importantly, the synthesized PdNPs are not only active for ROS generation but also show no hemolytic activity. We believe that this greener approach uncovered the useful and efficient applications of highly active PdNPs and their biocompatibility.

Biosynthesis and Cytotoxic Properties of Ag, Au, and Bimetallic Nanoparticles Synthesized Using Lithospermum erythrorhizon Callus Culture Extract

The present study reports a green chemistry approach for the rapid and easy biological synthesis of silver (Ag), gold (Au), and bimetallic Ag/Au nanoparticles using the callus extract of Lithospermum erythrorhizon as a reducing and capping agent. The biosynthesized nanoparticles were characterized with ultraviolet-visible (UV-Vis) spectroscopy, X-ray diffraction (XRD) analysis, and transmission electron microscopy (TEM). Our results showed the formation of crystalline metal nanostructures of both spherical and non-spherical shape. Energy dispersive X-ray (EDX) spectroscopy showed the characteristic peaks in the silver and gold regions, confirming the presence of the corresponding elements in the monometallic particles and both elements in the bimetallic particles. Fourier-transform infrared (FTIR) spectroscopy affirmed the role of polysaccharides and polyphenols of the L. erythrorhizon extract as the major reducing and capping agents for metal ions. In addition, our results showed that the polysaccharide sample and the fraction containing secondary metabolites isolated from L. erythrorhizon were both able to produce large amounts of metallic nanoparticles. The biosynthesized nanoparticles demonstrated cytotoxicity against mouse neuroblastoma and embryonic fibroblast cells, which was considerably higher for Ag nanoparticles and for bimetallic Ag/Au nanoparticles containing a higher molar ratio of silver. However, fibroblast migration was not significantly affected by any of the nanoparticles tested. The obtained results provide a new example of the safe biological production of metallic nanoparticles, but further study is required to uncover the mechanism of their toxicity so that the biomedical potency can be assessed.

Bioengineered Matricaria recutita Extract-Assisted Palladium Nanoparticles for the Congo Red Dye Degradation and Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol

The green chemistry method is the preferred approach for synthesizing metal and metal oxide nanoparticles because of its low toxicity, environmental friendliness, feasibility, and safety to human health compared with other chemical or physical methods. The present work reports the phytogenic synthesis of palladium nanoparticles (PdNPs) using an aqueous extract of Matricaria recutita (Chamomile). The phytochemical-mediated synthesis of PdNPs is an economical and eco-friendly approach without using toxic elements as reducing and capping or stabilizing agents. The UV-visible spectroscopic characterization was initially used to confirm the preparation of PdNPs using an aqueous extract of M. recutita flowers as a bioreductant for the reduction of Pd2+ to Pd0 without using any extra capping and reducing agents. The appearance of surface plasmon resonance (SPR) peak at 286 nm confirmed the formation of M. recutita extract-based PdNPs. Furthermore, the PdNPs were characterized by TEM, SEM, EDX, XRD, XPS, and FTIR to confirm their proper synthesis. The thermogravimetric analysis (TGA) was implemented to interpret the decomposition pattern and thermal stability of as-synthesized PdNPs. The biosynthesized PdNPs were further applied as a nanocatalyst in degradation of an azo dye Congo red (CR) in the presence of NaBH4. The catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) was also investigated in the presence of NaBH4. All the catalytic reactions were performed in water, and no significant loss in catalytic activity was observed after recovery and reusability of the biosynthesized PdNPs.

M. M. de Almeida J, Pastoriza-Santos I, C. C. Coelho L. Advances in Plasmonic Sensing at the NIR-A Review

Surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) are among the most common and powerful label-free refractive index-based biosensing techniques available nowadays. Focusing on LSPR sensors, their performance is highly dependent on the size, shape, and nature of the nanomaterial employed. Indeed, the tailoring of those parameters allows the development of LSPR sensors with a tunable wavelength range between the ultra-violet (UV) and near infra-red (NIR). Furthermore, dealing with LSPR along optical fiber technology, with their low attenuation coefficients at NIR, allow for the possibility to create ultra-sensitive and long-range sensing networks to be deployed in a variety of both biological and chemical sensors. This work provides a detailed review of the key science underpinning such systems as well as recent progress in the development of several LSPR-based biosensors in the NIR wavelengths, including an overview of the LSPR phenomena along recent developments in the field of nanomaterials and nanostructure development towards NIR sensing. The review ends with a consideration of key advances in terms of nanostructure characteristics for LSPR sensing and prospects for future research and advances in this field.

Application of Selected Nanomaterials and Ozone in Modern Clinical Dentistry

This review is an attempt to summarize current research on ozone, titanium dioxide (TiO₂), silver (Ag), copper oxide CuO and platinum (Pt) nanoparticles (NPs). These agents can be used in various fields of dentistry such as conservative dentistry, endodontic, prosthetic or dental surgery. Nanotechnology and ozone can facilitate the dentist’s work by providing antimicrobial properties to dental materials or ensuring a decontaminated work area. However, the high potential of these agents for use in medicine should be confirmed in further research due to possible side effects, especially in long duration of observation so that the best way to apply them can be obtained.

Rapid and Facile Microwave-Assisted Synthesis of Palladium Nanoparticles and Evaluation of Their Antioxidant Properties and Cytotoxic Effects Against Fibroblast-Like (HSkMC) and Human Lung Carcinoma (A549) Cell Lines

We report here a simple microwave irradiation method (850 W, 3 min) for the synthesis of palladium nanoparticles (Pd NPs) using ascorbic acid (as reducing agent) and sodium alginate (as stabilizer agent). The synthesized nanoparticles were characterized using transmission electron microscopy (TEM), energy dispersive X-ray (EDX), X-ray diffraction spectroscopy (XRD), UV-Visible spectroscopy, and Fourier transform infrared spectroscopy (FTIR) techniques. Antioxidant properties and cytotoxic effects of as-synthesized Pd NPs and Pd (II) acetate were also assessed. UV-Vis study showed the formation of Pd NPs with maximum absorption at 345 nm. From TEM analysis, it was observed that the Pd NPs had spherical shape with particle size distribution of 13-33 nm. Based on DPPH radical scavenging activity and reducing power assay, the antioxidant activities of Pd NPs were significantly higher than the Pd (II) acetate (p < 0.05). At the same concentration of 640 μg/mL, the scavenging activities were 32.9 ± 3.2% (Pd (II) acetate) and 27.2 ± 2.1% (Pd NPs). For A549 cells treated 48 h with Pd NPs, Pd (II) acetate, and cisplatin, the measured concentration necessary causing 50% cell death (IC₅₀) was 7.2 ± 1.7 μg/mL, 32.1 ± 2.1 μg/mL, and 206.2 ± 3.5 μg/mL, respectively. On HSkMC cells, the IC₅₀ of the Pd NPs (320 μg/mL) was higher compared to Pd (II) acetate (228.7 ± 3.6 μg/mL), which confirmed lower cytotoxicity of the Pd NPs.

A Chitosan-PLGA based catechin hydrate nanoparticles used in targeting of lungs and cancer treatment

OBJECTIVE

To prepare a novel Chitosan (CS)-coated-PLGA-NPs of catechin hydrate (CTH) and to improve lungs bioavailability via direct nose to lungs-delivery for the comparative assessment of a pulmokinetics study by the first-time UHPLC-MS/MS developed method in the treatment of lungs cancer via anticancer activities on H1299 lung cancer cells.

MATERIAL AND METHODS

PLGA-NPs was prepared by solvent evaporation (double emulsion) method followed by coated with chitosan (CS) and evaluated based on release and permeation of drug, a comparative pulmokinetics study with their anticancer activities on H1299 lung cancer cells.

RESULTS

The particle size, PDI and ZP of the optimized CAT-PLGA-NPs and CS-CAT-PLGA-NPs were determined 124.64 ± 12.09 nm and 150.81 ± 15.91 nm, 0.163 ± 0.03 and 0.306 ± 0.03, -3.94 ± 0.19 mV and 26.01 ± 1.19 mV respectively. Furthermore, higher entrapment efficiency was observed for CS-CAT PLGA NPs. The release pattern of the CS-CAT-PLGA NPs was found to favor the release of entrapped CAT within the cancer microenvironment. CS-CAT-PLGA-NPs exposed on H1299 cancer cells upto 24.0 h was found to be higher cytotoxic as compared to CAT-solution (CAT-S). CS-CAT-PLGA-NPs showed higher apoptosis of cancer cells after their exposure as compared to CAT-S. CS-CTH-PLGA-NPs showed tremendous mucoadhesive-nature as compared to CTH-S and CS-CTH-PLGA NPs by retention time (RT) of 0.589 min, and m/z of 289.21/109.21 for CTH alongwith RT of 0.613 min and m/z of 301.21/151.21 was found out for IS (internal standard), i.e. Quercetin). Likewise, for 1-1000 ng mL-1 (linear range) of % accuracy (92.01-99.31%) and %CV (inter & intra-day, i.e. 2.14-3.33%) was determined. The improved Cmax with AUC0-24 was observed extremely significant (p < 0.001) via i.n. as compared oral and i.v. in the wistar rat's lungs. The CS-approach was successfully designed and safely delivered CAT to the lungs without causing any risk.

CONCLUSION

CS-CTH-PLGA-NPs were showed a significant role (p < 0.001) for the enhancement of lungs-bioavailability and potentially promising approach to treat lung cancers. CS-CTH-PLGA-NPs did not cause any toxicity, it showed safety and have no obvious toxic-effects on the rat's lungs and does not produce any mortality followed by no abnormal findings in the treated-rats.

Microbial cell lysate supernatant (CLS) alteration impact on platinum nanoparticles fabrication, characterization, antioxidant and antibacterial activity

Microbial mediated biological synthesis of nanoparticles is of enormous interest to modern nanotechnology due to its simplicity and eco-friendliness. In the present study, a novel green method for the synthesis of platinum nanoparticles (PtNPs) has been developed using bio-derived product-cell lysate supernatant (CLS) from various microorganisms including Gram-negative bacteria: Pseudomonas kunmingensis ADR19, Psychrobacter faecalis FZC6, Vibrio fischeri NRRL B-11177, Gram-positive bacteria: Jeotgalicoccus coquinae ZC15, Sporosarcina psychrophila KC19, Kocuria rosea MN23, genetically engineered bacterium: Pseudomonas putida KT2440 and yeast: Rhodotorula mucilaginosa CCV1. The biogenic PtNPs were characterized by UV-visible spectroscopy, X-ray diffraction (XRD), Fourier transform infrared (FTIR), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), and atomic force microscopy (AFM). The UV-visible spectra showed a red shift in the absorbance of H₂PtCl₆.6H₂O from 260 nm to 330 nm for all prepared PtNPs. The XRD patterns of the samples indicated the formation of high purity of the cubic phase. The FTIR spectra and EDS profiles of the samples demonstrated the existence of proteins on fabricated and stabilized PtNPs. The TEM and AFM images analysis showed the synthesis of smallest PtNPs by a bacterium strain (FZC6) and yeast while genetically engineered bacteria produced the largest NPs. Also, the HRTEM analysis showed the high crystallinity of PtNPs and the interplanar spacing of 0.2 nm, corresponds to the (1 1 1) of plane of PtNPs. The results of zeta potential indicated the high stability of PtNPs in neutral pH. Moreover, the suitability of PtNPs antioxidant and antibacterial activity was correlated to the size and zeta potential of microbe used for NPs biosynthesis. In conclusion, it was found that the type of microorganisms can have influences on PtNPs characteristics and properties as Gram-negatives produced smaller PtNPs while more negatively charged NPs were obtained by Gram-positives. These findings could facilitate the selection of appropriate green approaches for more effective biotechnological production of PtNPs.

In Vitro Antimicrobial and Antioxidant Activity of Biogenically Synthesized Palladium and Platinum Nanoparticles Using Botryococcus braunii

OBJECTIVES

The spread of infectious diseases and the increase in drug resistance among microbes has forced researchers to synthesize biologically active nanoparticles. Ecofriendly procedures for the synthesis of nanoparticles are improving day by day in the field of nanobiotechnology. In the present study we used extract of the green alga Botryococcus braunii for the synthesis of palladium and platinum nanoparticles and evaluated their antimicrobial and antioxidant activity.

MATERIALS AND METHODS

Green alga was collected from Udaisagar Lake, Udaipur (Rajasthan, India) and isolated by serial dilution method and grown on Chu-13 nutrient medium. The characterization of alga synthesized palladium and platinum nanoparticles was carried out using X-ray diffraction and scanning electron spectroscopy. The zone of inhibition was measured by agar well plate method and minimum inhibitory concentration was determined by agar dilution assay for antimicrobial activity. The antioxidant activity of the nanoparticles was also studied by 1,1-diphenyl-2-picrylhydrazyl method.

RESULTS

Stable palladium and platinum nanoparticles were successfully produced using green alga. The XRD pattern revealed the crystalline nature and scanning electron micrographs showed the morphology of biogenically synthesized metal nanoparticles. Fourier transform infrared measurements showed all functional groups having control over stabilization and reduction of the nanoparticles. The green synthesized nanoparticles exhibited antimicrobial activity against gram-positive and gram-negative bacterial strains, antifungal activity against a fungus, and antioxidant activity.

CONCLUSION

The biogenic synthesis of metal nanoparticles can be a promising process for the production of other transition metal nanoparticles and new nanocatalysts will revolutionize the synthesis of organic heterocycles.