Soluplus-Mediated Diosgenin Amorphous Solid Dispersion with High Solubility and High Stability: Development, Characterization and Oral Bioavailability

Enhanced dissolution and antibacterial potential of cinacalcet hydrochloride via ternary solid dispersions

Cinacalcet hydrochloride (HCl), a calcium-sensing receptor agonist used to treat hyperparathyroidism, suffers from poor solubility, reducing its bioavailability. Recently, cinacalcet HCl has been probed for repurposing as antibacterial agent. This work investigates cinacalcet HCl's potential as an antibacterial agent and provides a formulation to improve the drug dissolution. Solid dispersion formulations using Poloxamer 407, with and without Soluplus®, were prepared via solvent evaporation and hot melt congealing methods. The resulting formulations were analyzed using differential scanning calorimetry, FTIR spectroscopy, X-ray powder diffraction, and dissolution studies. These formulations significantly enhanced cinacalcet HCl dissolution compared to the unprocessed form, achieving up to a 15-fold increase in Q5 (percent of cinacalcet HCl dissolved after 5 min). The dissolution efficiency rose from 28% for the pure drug to 94.8 and 87.8% for formulations F6 and F7, respectively. Microbiological evaluations confirmed the antibacterial effect of cinacalcet HCl, which was notably increased in the Poloxamer 407 and Soluplus® hybrid formulation (F7) with a MIC of 64-128 µg/ml. Antibiofilm activity was also observed, with qRT-PCR indicating downregulation of biofilm genes (icaA, icaD, and fnbA). This study introduces a cinacalcet HCl formulation prepared using a scalable, green approach, demonstrating significant potential for antimicrobial applications.

Pharmacokinetic and Pharmacodynamic Study of Folic Acid-Modified Chitosan-Stearic Acid Nanomicelles Loaded with Tetrandrine for Rheumatoid Arthritis

BACKGROUND

Rheumatoid arthritis (RA) is a chronic autoimmune disease, and it is currently incurable. Tetrandrine (TET) has an obvious curative effect with therapeutic efficacy on RA, but its use is limited due to its poor water-solubility and bioavailability. Therefore, TET-loaded nanomicelles modified with chitosan, stearic acid, and folic acid (FCST) was prepared in the study, and the pharmacokinetics and pharmacodynamics were studied.

METHODS

The plasma concentrations of FCST and TET were measured by the PLC-MS/MS method at different times, and the pharmacokinetic parameters were calculated. A collagen-induced arthritis (CIA) model was established with rats. On the 16th day after the first immunization, 50 rats were randomized into five groups with 10 rats in each group according to the arthritis score. The drugs were administered by intraperitoneal injection for 30 days. The swelling degree and joint score of the rats were tested during each administration. In addition, the pro-inflammatory factors IL-1β, IL-6, IL-17, and TNF-α in the serum of the rats were tested by an ELISA kit, and their joints were examined by histopathology.

RESULTS

Pharmacokinetic studies showed that the AUC0-72h of FCST was 1.93 times that of TET. FCST demonstrated higher bioavailability compared to TET (p < 0.05). Pharmacodynamic studies demonstrated that FCST had significant anti-inflammatory effects, and its anti-inflammatory activity was stronger compared to the same dose of TET, as evidenced by measuring toe thickness and observing toe appearance. It significantly reduced the expression of IL-1, IL-6, IL-17, and TNF-α in rats with rheumatoid arthritis (p < 0.05).

CONCLUSIONS

FCST can significantly improve bioavailability and has a significant therapeutic effect on rheumatoid arthritis.

3D-Printed Tablets of Nifurtimox: In Vitro and In Vivo Anti-Trypanosoma cruzi Studies

Background/Objectives: Chagas disease is a neglected tropical disease caused by infection with the parasite Trypanosoma cruzi. Benznidazole and nifurtimox are the only approved drugs for treating this condition, but their low aqueous solubility may lead to erratic bioavailability. This work aimed for the first time to formulate tablets of nifurtimox by hot melt extrusion coupled with 3D printing as a strategy to increase drug dissolution and the production of tablets with dosage on demand. Methods: Different pharmaceutical-grade polymers were evaluated through film casting, and those with promising nifurtimox amorphization capacity were further used to prepare filaments by hot melt extrusion. The printability of the obtained filaments was tested, and the polyvinyl alcohol filament was further used for printing tablets containing 120 and 60 mg of nifurtimox. Results: Three-dimensional tablets showed a remarkable improvement in the drug dissolution rate compared to commercial tablets and a dissolution efficiency 2.8 times higher. In vivo studies were carried out on Swiss mice. Parasitemia curves of nifurtimox printed tablets were significantly superior to the pure drug. Moreover, NFX 3D tablets provided a similar Trypanosoma cruzi reduction in plasmatic concentration to benznidazole, the gold-standard drug for acute-phase treatment of the Chagas disease. Conclusions: The findings of this work showed that hot melt extrusion coupled with 3D printing is a promising alternative for increasing nifurtimox biopharmaceutical properties and an attractive approach for personalized medicine.

Amorphous Solid Dispersions of Glycyrrhetinic Acid: Using Soluplus, PVP, and PVPVA as the Polymer Matrix to Enhance Solubility, Bioavailability, and Stability

Glycyrrhetinic acid (GA) possesses various pharmacological effects, including anti-inflammatory, anti-tumor, and anti-viral properties. However, its clinical application is limited by poor solubility and low oral bioavailability. Polymers play a crucial role in pharmaceutical formulations, particularly as matrices in excipients to enhance the solubility, bioavailability, and stability of active pharmaceutical ingredients. The amorphous solid dispersions (ASDs) of GA were prepared with three different polymers (i.e., GA-S-ASD, GA-VA64-ASD, and GA-K30-ASD). The ASDs were characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR spectroscopy), molecular docking, and contact angle measurement. Pharmacokinetics were evaluated in Beagle dogs, and long-term stability was examined. The solubility of GA increased with the rising weight of the polymer, and the optimal drug-to-carrier ratio was 1:5. In all ASDs, GA was amorphous, thus suggesting that a hydrogen bonding must have formed between GA and the polymers. The molecular docking showed that the binding energy was the highest and the hydrogen bonding was the strongest between GA and Soluplus. The dissolution of the ASDs was primarily driven by carrier-controlled dissolution, and there was minor influence from diffusion-limited release in the case of GA-S-ASD. The three ASDs significantly improved the bioavailability of GA. However, only GA-S-ASD passed the accelerated stability test. In the case of GA-VA64-ASD and GA-K30-ASD, due to serious moisture absorption, the originally fluffy ASDs became gels, and recrystallization occurred. Overall, GA-S-ASD presents promising potential for pharmaceutical applications due to its superior solubility, bioavailability, and stability.

Improve Solubility and Develop Personalized Itraconazole Dosages via Forming Amorphous Solid Dispersions with Hydrophilic Polymers Utilizing HME and 3D Printing Technologies

Itraconazole (ITZ), a broad-spectrum triazole antifungal agent, exhibits remarkable pharmacodynamic and pharmacokinetic properties. However, the low solubility of ITZ significantly reduces its oral bioavailability. Furthermore, it has been reported that this medication can result in dose-related adverse effects. Therefore, the objective of this study was to enhance the solubility of ITZ through the utilization of various polymers and to manufacture personalized and programmable release ITZ tablets. Five different polymers were selected as water-soluble carriers. Thirty percent w/w ITZ was mixed with seventy percent w/w of the polymers, which were then extruded. A series of physical and chemical characterization studies were conducted, including DSC, PXRD, PLM, and in vitro drug release studies. The results demonstrated that ITZ was dispersed within the polymers, forming ASDs that markedly enhanced its solubility and dissolution rate. Consequently, soluplus® was employed as the polymer for the extrusion of ITZ-loaded filaments, which were subsequently designed and printed. The in vitro drug release studies indicated that the release of ITZ could be regulated by modifying the 3D structure design. Overall, this study found that the combination of HME and 3D printing technologies could represent an optimal approach for the development of personalized and precise drug delivery dosages.

Manifesting the Dasatinib-gallic acid co-amorphous system to augment anticancer potential: Physicochemical characterization, in silico molecular simulation, ex vivo permeability, and in vitro efficacy

Dasatinib (DAB) has been explored for repurposing in the treatment of breast cancer (BC) due to its known effectiveness in treating leukemia, in addition to its role as a tyrosine kinase inhibitor. Gallic acid (GA) was chosen as a co-former due to its anticancer potential in BC, as demonstrated in several previous studies. DAB is a low-solubility drug, which is a significant hurdle for its oral bioavailability. To address this limitation, a DAB and GA co-amorphous (DAB-GA-CA) system was developed using liquid-assisted grinding and ball mill technology to enhance solubility, bioavailability, and anti-tumor efficacy. Physical characterization investigation revealed that the emergence of the halo diffractogram in PXRD, single glass transition temperature (Tg) value at 111.7 °C in DSC thermogram, and irregularly shaped blocks with loose, porous surfaces in SEM analysis indicated the formation of the DAB-GA-CA system at 1:1 M ratio. Furthermore, FTIR, Raman spectroscopy, in-silico molecular docking, and molecular dynamic studies confirmed the intermolecular hydrogen connections between DAB and GA. Moreover, the outcomes of the ligands (DAB and GA) and receptors (BCL-2, mTOR, estrogen receptor, and HER-2) docking studies demonstrated that both DAB and GA could interact with those receptors, leading to preventive action on BC cells. Additionally, the solubility and dissolution rate significantly improved at pH 6.8, and the permeability study indicated that DAB-GA-CA showed 1.9 times higher apparent permeability compared to crystalline DAB. Furthermore, in vitro cytotoxicity assessments of the DAB-GA-CA system revealed 3.42 times lower IC50 than free DAB. The mitochondrial membrane depolarization, apoptotic index, and reactive oxygen species formation in MCF-7 cells were also notably higher in the DAB-GA-CA system than in free DAB. Hence, this research suggests that the DAB-GA-CA system could substantially enhance oral delivery, solubility, and therapeutic efficacy.

Investigation of Stabilized Amorphous Solid Dispersions to Improve Oral Olaparib Absorption

In this study, we investigated the formulation of stable solid dispersions to enhance the bioavailability of olaparib (OLA), a therapeutic agent for ovarian cancer and breast cancer characterized as a BCS class IV drug with low solubility and low permeability. Various polymers were screened based on solubility tests, and OLA-loaded solid dispersions were prepared using spray drying. The physicochemical properties of these dispersions were investigated via scanning electron microscopy (SEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier Transform Infrared Spectroscopy (FT-IR). Subsequent dissolution tests, along with assessments of morphological and crystallinity changes in aqueous solutions, led to the selection of a hypromellose (HPMC)-based OLA solid dispersion as the optimal formulation. HPMC was effective at maintaining the supersaturation of OLA in aqueous solutions and exhibited a stable amorphous state without recrystallization. In an in vivo study, this HPMC-based OLA solid dispersion significantly enhanced bioavailability, increasing AUC0-24 by 4.19-fold and Cmax by more than 10.68-fold compared to OLA drug powder (crystalline OLA). Our results highlight the effectiveness of HPMC-based solid dispersions in enhancing the oral bioavailability of OLA and suggest that they could be an effective tool for the development of oral drug formulations.

The baicalein amorphous solid dispersion to enhance the dissolution and bioavailability and effects on growth performance, meat quality, antioxidant capacity and intestinal flora in Taihang chickens

Baicalein (BAI) is a natural flavonoid with antioxidant, antitumor and antibacterial properties. However, the bioavailability of BAI was limited due to low solubility. This study aims to improve the solubility of BAI through the amorphous solid dispersion (ASD) and evaluate changes in its pharmacokinetics and pharmacodynamics in Taihang chickens. Polyethylene caprolactam-polyvinyl acetate-polyethylene glycol grafted copolymer (Soluplus) was chosen as the carrier, and ASD was prepared by rotary evaporation and was characterized by powder X-ray diffractions (PXRD), differential scanning calorimetry (DSC) and fourier transform infrared spectroscopy (FT-IR). In vitro dissolution assays were used to screen the optimal ratio of drug to carrier, in vivo pharmacokinetic assays were conducted to investigate the promoting effect on the absorption. In addition, the effects of ASD on the growth performance, meat quality, antioxidant capacity and intestinal flora were investigated. ASD (1:9 and 2:8) did not exhibit crystal diffraction peaks of BAI in PXRD or endothermic peaks in DSC, indicating the successful preparation of ASD. The results of in vitro dissolution assay showed that the cumulative dissolution rate of ASD (2:8) within 600 min was 52.67%, which was 7.84-fold higher than BAI. The pharmacokinetic results showed that the peak concentration (Cmax) and the area under the drug-time curve (AUC0∼24) of ASD (2:8) was (5.20 ± 0.82) μg/mL and (17.03 ± 0.67) μg·h/mL, which was 1.91 and 2.64-fold higher than BAI, respectively. Dietary supplementation of BAI and ASD could increase average daily gain (ADG), while decrease feed conversion ratio (FCR), but there was no significant difference (P > 0.05). The drip loss of BAIASD group was lower than BAI group (P < 0.05). In addition, the antioxidant capacity of Taihang chickens were enhanced, the diversity and the abundance of beneficial bacteria was improved. Results of BAI upon the dietary supplementation tested in Taihang chickens, after preparation of ASD, indicating a superior enhancement effect in growth performance, meat quality, antioxidant capacity and intestinal flora due to an improved solubility and optimized bioavailability.

Enhancing hepatoprotective action: oxyberberine amorphous solid dispersion system targeting TLR4

Oxyberberine (OBB) is a significant natural compound, with excellent hepatoprotective properties. However, the poor water solubility of OBB hinders its release and absorption thus resulting in low bioavailability. To overcome these drawbacks of OBB, amorphous spray-dried powders (ASDs) of OBB were formulated. The dissolution, characterizations, and pharmacokinetics of OBB-ASDs formulation were investigated, and its hepatoprotective action was disquisitive in the D-GalN/LPS-induced acute liver injury (ALI) mouse model. The characterizations of OBB-ASDs indicated that the crystalline form of OBB active pharmaceutical ingredients (API) was changed into an amorphous form in OBB-ASDs. More importantly, OBB-ASDs showed a higher bioavailability than OBB API. In addition, OBB-ASDs treatment restored abnormal histopathological changes, improved liver functions, and relieved hepatic inflammatory mediators and oxidative stress in ALI mice. The spray drying techniques produced an amorphous form of OBB, which could significantly enhance the bioavailability and exhibit excellent hepatoprotective effects, indicating that the OBB-ASDs can exhibit further potential in hepatoprotective drug delivery systems. Our results provide guidance for improving the bioavailability and pharmacological activities of other compounds, especially insoluble natural compounds. Meanwhile, the successful development of OBB-ASDs could shed new light on the research process of poorly soluble medicine.

A new multi-template molecularly imprinted polymer for separation and purification of dioscin, protodioscin, and diosgenin from purple yam

Saponin is an essential natural compound in purple yams with high nutritional and medicinal value. In this work, a multitemplate molecule-imprinted polymer (MMIP) was synthesized with dioscin, protodioscin, and diosgenin templates. The MMIPs were characterized with scanning electron microscopy, thermogravimetric analysis, Brunauer-Emmett-Teller (BET) adsorption, and Fourier transform infrared spectroscopy. The efficacy of the MMIPs was assessed with static, dynamic, selective adsorption, desorption, and reusability experiments. The three saponins were selectively extracted and determined by MMIP-high-performance liquid chromatography. The polymer morphology was regular and spherical. The amount of the MMIP adsorbed was 74.825 mg/g, and the imprinting factor was 2.1. The MMIP adsorbed the three saponins from purple yam extract, with recovery rates of 95.5-103.43 % and desorption rates of 85 %-98 %. In addition, the MMIPs were reused at least six times. These results demonstrated that the MMIPs efficiently and selectively extracted dioscin, protodioscin, and diosgenin from food matrices at high rates.

Formulation development, characterization, and evaluation of bedaquiline fumarate - Soluplus® - solid dispersion

Bedaquiline fumarate (BQF) is classified as a BCS class II drug and has poor water solubility and dissolution rate, which ultimately compromises bioavailability. The objective of this study is to improve the biopharmaceutical properties of BQF through a solid dispersion system by using Soluplus®. Two solid dispersion systems were prepared i.e. binary solid dispersion (BSD) and ternary solid dispersion (TSD) where 14.31-fold and 20.43-fold increase in solubility of BQF was observed with BSD and TSD in comparison to BQF. In our previous research work, we explored the BSD and TSD of BQF with a crystalline polymer, poloxamer 188, which showed an increment in the solubility of BQF. In the current research, amorphous Soluplus® polymer was selected to formulate BSD and TSD with BQF and showed higher solubility than poloxamer 188. The various solid and liquid state characterization results confirmed the presence of an amorphous form of BQF inside solid dispersion. The Fourier transform infrared spectroscopy showed no chemical interactions between BQF and polymer. The cellular uptake results demonstrated higher uptake in Caco-2 cell lines. Pharmacokinetic studies showed enhanced solubility and bioavailability of TSDs. Hence, the present research shows a promising formulation strategy for enhancing the biopharmaceutical performance of BQF by increasing its solubility.

Febuxostat solubilization and stabilization approach using solid dispersion method: Synergistic effect of dicalcium phosphate dehydrate and chitosan

Drug solubilization studies are continuously being conducted. Febuxostat (FBX) has a low solubility in water. This study aims to develop a stable FBX-solid dispersion (SD) formulation using a solvent evaporation method. The solubilization strategy of FBX is to develope an optimal FBX-SD formulation by selecting a solubilizer and carrier through the screening method. The final selected solubilizer, macrogol 15 hydroxystearate and polyoxyl 15 hydroxystearate (Kolliphor® HS-15), is widely used in the pharmaceutical industry as a nonionic solubilizing and emulsifying agent and has low toxicity. Especially when commonly used in developing lipophilic drug formulations, it dissolves well in water and ethyl alcohol. The optimal composition ratio of the formulation (SD4) was FBX:HS-15®:granular dicalcium phosphate dehydrate (DCP-D): A synthetic magnesium aluminometasilicate (Neusilin®UFL2):chitosan = 1:3:3:1:1 (w/w) and showed 3.0-, 2.3-, and 1.1-fold higher dissolution (%) of FBX compared to that of the Feburic tab® in pH 1.2 media, distilled water (DW), and pH 6.8 buffer, respectively. Also, in vitro release and in vitro permeability in SD4 formulation showed higher than that of Feburic tab®. Based on its stability over 6 months, it was confirmed that chitosan acted as a stabilizer. Moreover, due to weak intermolecular interactions, FBX in the SD4 formulation was considered to exist in a mixed state of amorphous and crystalline FBX. In conclusion, the improved dissolution (%) and stability of FBX in SD4 formulation were secured through the synergistic effect of excipients.

Preparation of Piroxicam nanosuspensions by high pressure homogenization and evaluation of improved bioavailability

OBJECTIVE

Inflammation is a natural response of the organism, involving events responsible for releasing chemical mediators and requiring treatments of symptoms such as pain, redness, heat, swelling, and loss of tissue function. Piroxicam (PRX) is a non-steroidal anti-inflammatory drug with the effect of nonselective COX inhibitor activity; however, it shows poor bioavailability caused by the poor and slow water solubility. In this study, we developed PRX nanosuspensions with 200-500 nm in diameter to increase the bioavailability of PRX by improving its solubility.

METHODS

PRX nanosuspensions were fabricated by High pressure homogenization method with PVA, SDS and Tween 80. The nanosuspensions were characterized by XRD, FTIR, DSC, and in vitro release. In vivo pharmacokinetic properties and anti-inflammatory effects were also investigated in rabbits.

RESULTS

PRX nanosuspensions significantly increased the solubility (14.89 ± 0.03 mg/L for pure PRX and 16.75 ± 0.05 mg/L for PRX nanosuspensions) and dissolution rate as compared to the pure PRX (p < 0.05). Orally administered PRX nanosuspension (AUC 0-t is 49.26 ± 4.29 μg/mL × h) significantly improved the bioavailability of PRX (AUC 0-t is 28.40 ± 12.11 μg/mL × h). The anti-inflammatory effect of PRX nanosuspension was also investigated in rabbits and it was observed that PRX nanosuspension treatment significantly improved the inhibition of COX-2 and NFκB expression as compared to the PRX treatment (p < 0.05).

CONCLUSIONS

The results in this study indicate that PRX nanosuspension is a promising nanomedicine for enhancing the anti-inflammatory activity of PRX and has a high potential for the treatment of inflammation.

Quality by design-based development and optimization of fourth-generation ternary solid dispersion of standardized Piper longum extract for melanoma therapy

The study aimed to enhance the solubility, dissolution, and oral bioavailability of standardized Piper longum fruits ethanolic extract (PLFEE) via fourth-generation ternary solid dispersion (SD) for melanoma therapy. With the use of solvent evaporation method, the standardized PLFEE was formulated into SD, optimized using Box-Wilson's central composite design (CCD), and evaluated for pharmaceutical performance and in vivo anticancer activity against melanoma (B16F10)-bearing C57BL/6 mice. The optimized SD showed good accelerated stability, high yield, drug content, and content uniformity for bioactive marker piperine (PIP). The X-ray diffraction (XRD), differential scanning calorimetry (DSC), polarized light microscopy (PLM), and selected area electron diffraction (SAED) analysis revealed its amorphous nature. The attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and high-performance thin layer chromatography (HPTLC) revealed the compatibility of excipients with the PLFEE. The contact angle measurement and in vitro dissolution study revealed excellent wetting of SD and improved dissolution profile as compared to the plain PLFEE. The in vivo oral bioavailability of SD reflected a significant (p < 0.05) improvement in bioavailability (Frel = 188.765%) as compared to plain extract. The in vivo tumor regression study revealed the improved therapeutic activity of SD as compared to plain PLFEE. Further, the SD also improved the anticancer activity of dacarbazine (DTIC) as an adjuvant therapy. The overall result revealed the potential of developed SD for melanoma therapy either alone or as an adjuvant therapy with DTIC.

Amorphous solid dispersion augments the bioavailability of phloretin and its therapeutic efficacy via targeting mTOR/SREBP-1c axis in NAFLD mice

The escalating incidences of non-alcoholic fatty liver disease (NAFLD) and associated metabolic disorders are global health concerns. Phloretin (Ph) is a natural phenolic compound, that exhibits a wide array of pharmacological actions including its efficacy towards NAFLD. However, poor solubility and bioavailability of phloretin limits its clinical translation. Here, to address this concern we developed an amorphous solid dispersion of phloretin (Ph-SD) using Soluplus® as a polymer matrix. We further performed solid-state characterization through SEM, P-XRD, FT-IR, and TGA/DSC analysis. Phloretin content, encapsulation efficiency, and dissolution profile of the developed formulation were evaluated through reverse phase HPLC. Finally, the oral bioavailability of Ph-SD and its potential application in the treatment of experimental NAFLD mice was investigated. Results demonstrated that the developed formulation (Ph-PD) augments the dissolution profile and oral bioavailability of the native phloretin (Ph). In NAFLD mice, histopathological studies revealed the preventive effect of Ph-SD on degenerative changes, lipid accumulation, and inflammation in the liver. Ph-SD also improved the serum lipid profile, ALT, and AST levels and lowered the interleukin-6 and tumor necrosis factor-α levels in the liver. Further, Ph-SD reduced fibrotic changes in the liver tissues and attenuates NAFLD progression by blocking the mTOR/SREBP-1c pathway. In a nutshell, the results of our study strongly suggest that Ph-SD has the potential to be a therapeutic candidate in the treatment of NAFLD and can be carried forward for further clinical studies.

Bentonite as a water-insoluble amorphous solid dispersion matrix for enhancing oral bioavailability of poorly water-soluble drugs

Bentonite (BT), an orally administrable natural clay, is widely used for medical and pharmaceutical purposes due to its unique properties, including swelling, adsorption and ion-exchange. However, its application as a matrix of amorphous solid dispersion (ASD) formulations is rarely reported, despite the fact that drugs can adsorb to BT in an amorphous state. The objective of this study was to explore the feasibility of BT as a water-insoluble ASD matrix for enhancing the oral bioavailability of poorly water-soluble drugs, including sorafenib (SF). We prepared a novel BT-based ASD of an SF-BT composite (SFBTC) by adsorbing SF onto BT under acidic conditions using the ionic interaction between cationic SF and negatively charged BT. Scanning electron microscopy (SEM), powder X-ray diffractometry (pXRD), and differential scanning calorimetry (DSC) analyses revealed that SF adsorbed to BT in an amorphous state at SF:BT ratios from 1:3 to 1:10. In pharmacokinetic studies in rats, SFBTC (1:3) significantly improved the oral bioavailability of SF, and the AUClast of SFBTC (1:3) was 3.3-fold higher than that of NEXAVAR®, a commercial product of SF. An in vitro release study under sink conditions revealed that SFBTC (1:3) completely released SF in a pH-dependent manner, while a nonsink condition study indicated the generation of supersaturation under intestinal pH conditions. A kinetic solubility study showed that the release of SFBTC (1:3) followed the diffusion-controlled mechanism, which is a typical characteristic of water-insoluble matrix-based ASDs. The pharmacokinetic studies of drug-BT composites of various drugs belonging to BCS class II indicated that the pKa value of the adsorbed drugs is one of the most important factors determining their dissolution and oral bioavailability. These results suggest that BT could be a promising water-insoluble ASD matrix for improving the oral bioavailability of poorly water-soluble drugs, including SF.

Review of industrially recognized polymers and manufacturing processes for amorphous solid dispersion based formulations

Evolving therapeutic landscape through combinatorial chemistry and high throughput screening have resulted in an increased number of poorly soluble drugs. Drug delivery strategies quickly adapted to convert these drugs into successful therapies. Amorphous solid dispersion (ASD) technology is widely employed as a drug delivery strategy by pharmaceutical industries to overcome the challenges associated with these poorly soluble drugs. The development of ASD formulation requires an understanding of polymers and manufacturing techniques. A review of US FDA-approved ASD-based products revealed that only a limited number of polymers and manufacturing technologies are employed by pharmaceutical industries. This review provides a comprehensive guide for the selection and overview of polymers and manufacturing technologies adopted by pharmaceutical industries for ASD formulation. The various employed polymers with their underlying mechanisms for solution-state and solid-state stability are discussed. ASD manufacturing techniques, primarily implemented by pharmaceutical industries for commercialization, are presented in Quality by Design (QbD) format. An overview of novel excipients and progress in manufacturing technologies are also discussed. This review provides insights to the researchers on the industrially accepted polymers and manufacturing technology for ASD formulation that has translated these challenging drugs into successful therapies.

Amorphous Solid Dispersion as Drug Delivery Vehicles in Cancer

Cancer treatment has improved over the past decades, but a major challenge lies in drug formulation, specifically for oral administration. Most anticancer drugs have poor water solubility which can affect their bioavailability. This causes suboptimal pharmacokinetic performance, resulting in limited efficacy and safety when administered orally. As a result, it is essential to develop a strategy to modify the solubility of anticancer drugs in oral formulations to improve their efficacy and safety. A promising approach that can be implemented is amorphous solid dispersion (ASD) which can enhance the aqueous solubility and bioavailability of poorly water-soluble drugs. The addition of a polymer can cause stability in the formulations and maintain a high supersaturation in bulk medium. Therefore, this study aimed to summarize and elucidate the mechanisms and impact of an amorphous solid dispersion system on cancer therapy. To gather relevant information, a comprehensive search was conducted using keywords such as "anticancer drug" and "amorphous solid dispersion" in the PubMed, Scopus, and Google Scholar databases. The review provides an overview and discussion of the issues related to the ASD system used to improve the bioavailability of anticancer drugs based on molecular pharmaceutics. A thorough understanding of anticancer drugs in this system at a molecular level is imperative for the rational design of the products.

Amorphous Solid Dispersion of Hesperidin with Polymer Excipients for Enhanced Apparent Solubility as a More Effective Approach to the Treatment of Civilization Diseases

The present study reports amorphous solid dispersions (ASDs) of hesperidin (Hes) prepared by ball milling to improve its solubility and apparent solubility over the unmodified compound. The carriers were Soluplus^® (Sol), alginate sodium (SA), and hydroxypropylmethylcellulose (HPMC). XRPD analysis confirmed full amorphization of all binary systems in 1:5 w/w ratio. One glass transition (T_g) observed in DSC thermograms of hesperidin:Soluplus^® (Hes:Sol) and hesperidin:HPMC (Hes:HPMC) 1:5 w/w systems confirmed complete miscibility. The mathematical model (Gordon-Taylor equation) indicates that the obtained amorphous systems are characterized by weak interactions. The FT-IR results confirmed that hydrogen bonds are responsible for stabilizing the amorphous state of Hes. Stability studies indicate that the strength of these bonds is insufficient to maintain the amorphous state of Hes under stress conditions (25 °C and 60 °C 76.4% RH). HPLC analysis suggested that the absence of degradation products indicates safe hesperidin delivery systems. The solubility and apparent solubility were increased in all media (water, phosphate buffer pH 6.8 and HCl (0.1 N)) compared to the pure compound. Our study showed that all obtained ASDs are promising systems for Hes delivery, wherein Hes:Sol 1:5 w/w has the best solubility (about 300-fold in each media) and apparent solubility (about 70% in phosphate buffer pH 6.8 and 63% in HCl).

Enhancement of the Solubility and Dissolution Rate of Telmisartan by Surface Solid Dispersions Employing Superdisintegrants, Hydrophilic Polymers and Combined Carriers

Telmisartan (Tel) is a potent antihypertensive drug with a very poor aqueous solubility, especially in pH ranging from 3 to 9 (i.e., biological fluids) that results in poor bioavailability. Our aim was to improve Tel solubility and dissolution rates without the need for expensive multistep procedures, and without inclusion of alkalinizers. This study adopted the use of surface solid dispersions (SSDs) employing superdisintegrants, hydrophilic polymers and combined carriers including a superdisintegrant with a hydrophilic polymer. Tel-SSDs were formulated using thesolvent evaporation method. Compatibility between Tel and different carriers was examined via FT-IR. Tel-SSDs were evaluated optically and thermally to reveal a complete loss of the crystalline nature of the drug. Both drug content and percentage yield were calculated to judge the efficiency of the preparation technique used. Saturation, aqueous solubility, and dissolutions rates were determined. Dissolution profiles were studied using model dependent and independent approaches and were subjected to the pair-wise procedure using the DDsolver software program. Effect of aging was studied by comparing the drug content and dissolution profiles of freshly prepared SSDs with aged samples. All Tel-SSDs showed acceptable physical properties. Tel-SSDs showed pertinent enhancement related to the carrier used. Combined surface solid dispersions employing superdisintegrant croscarmellose sodium with either hydrophilic polymer PEG 4000 or Poloxamer 407 gave remarkable enhancement in solubility and dissolution rates of Tel where more than 90% of the drug was released within 20 min. The effect of aging results proved a non-significant difference in the drug content and dissolution profiles between fresh and aged samples. Formulation of Tel SSDs using combined carriers proved to be effective in enhancing the aqueous solubility and dissolution rates of Tel, as well as showing good stability upon aging.

Pharmacokinetic Analysis of Diosgenin in Rat Plasma by a UPLC-MS/MS Approach

Diosgenin, a steroidal sapogenin, has attracted attention worldwide owing to its pharmacological properties, including antitumor, cardiovascular protective, hypolipidemic, and anti-inflammatory effects. The current diosgenin analysis methods have the disadvantages of long analysis time and low sensitivity. The aim of the present study was to establish an efficient, sensitive ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) approach for pharmacokinetic analysis of diosgenin amorphous solid dispersion (ASD) using tanshinone IIA as an internal standard (IS). Male Sprague-Dawley rats were orally administered diosgenin ASD, and orbital blood samples were collected for analysis. Protein precipitation was performed with methanol-acetonitrile (50 : 50, v/v), and the analytes were separated under isocratic elution by applying acetonitrile and 0.03% formic acid aqueous solution at a ratio of 80 : 20 as the mobile phase. MS with positive electron spray ionization in multiple reaction monitoring modes was applied to determine diosgenin and IS with m/z 415.2⟶271.2 and m/z 295.2⟶277.1, respectively. This approach showed a low limit of quantification of 0.5 ng/ml for diosgenin and could detect this molecule at a concentration range of 0.5 to 1,500 ng/ml (r = 0.99725). The approach was found to have intra- and inter-day precision values ranging from 1.42% to 6.91% and from 1.25% to 3.68%, respectively. Additionally, the method showed an accuracy of -6.54 to 4.71%. The recoveries of diosgenin and tanshinone IIA were 85.81-100.27% and 98.29%, respectively, with negligible matrix effects. Diosgenin and IS were stable under multiple storage conditions. Pharmacokinetic analysis showed that the C _max and AUC_0⟶t of diosgenin ASD were significantly higher than those of the bulk drug. A sensitive, simple, UPLC-MS/MS analysis approach was established and used for the pharmacokinetic analysis of diosgenin ASD in rats after oral administration.

Continuous Manufacturing and Molecular Modeling of Pharmaceutical Amorphous Solid Dispersions

Amorphous solid dispersions enhance solubility and oral bioavailability of poorly water-soluble drugs. The escalating number of drugs with poor aqueous solubility, poor dissolution, and poor oral bioavailability is an unresolved problem that requires adequate interventions. This review article highlights recent solubility and bioavailability enhancement advances using amorphous solid dispersions (ASDs). The review also highlights the mechanism of enhanced dissolution and the challenges faced by ASD-based products, such as stability and scale-up. The role of process analytical technology (PAT) supporting continuous manufacturing is highlighted. Accurately predicting interactions between the drug and polymeric carrier requires long experimental screening methods, and this is a space where computational tools hold significant potential. Recent advancements in data science, computational tools, and easy access to high-end computation power are set to accelerate ASD-based research. Hence, particular emphasis has been given to molecular modeling techniques that can address some of the unsolved questions related to ASDs. With the advancement in PAT tools and artificial intelligence, there is an increasing interest in the continuous manufacturing of pharmaceuticals. ASDs are a suitable option for continuous manufacturing, as production of a drug product from an ASD by direct compression is a reality, where the addition of multiple excipients is easy to avoid. Significant attention is necessary for ongoing clinical studies based on ASDs, which is paving the way for the approval of many new ASDs and their introduction into the market.

Development and Characterization of Eudragit® EPO-Based Solid Dispersion of Rosuvastatin Calcium to Foresee the Impact on Solubility, Dissolution and Antihyperlipidemic Activity

Poor solubility is the major challenge involved in the formulation development of new chemical entities (NCEs), as more than 40% of NCEs are practically insoluble in water. Solid dispersion (SD) is a promising technology for improving dissolution and, thereby, the bioavailability of poorly soluble drugs. This study investigates the influence of a pH-sensitive acrylate polymer, EPO, on the physicochemical properties of rosuvastatin calcium, an antihyperlipidemic drug. In silico docking was conducted with numerous polymers to predict drug polymer miscibility. The screened-out polymer was used to fabricate the binary SD of RoC in variable ratios using the co-grinding and solvent evaporation methods. The prepared formulations were assessed for physiochemical parameters such as saturation solubility, drug content and in vitro drug release. The optimized formulations were further ruled out using solid-state characterization (FTIR, DSC, XRD and SEM) and in vitro cytotoxicity. The results revealed that all SDs profoundly increased solubility as well as drug release. However, the formulation RSE-2, with a remarkable 71.88-fold increase in solubility, presented 92% of drug release in the initial 5 min. The molecular interaction studied using FTIR, XRD, DSC and SEM analysis evidenced the improvement of in vitro dissolution. The enhancement in solubility of RoC may be important for the modulation of the dyslipidemia response. Therefore, pharmacodynamic activity was conducted for optimized formulations. Our findings suggested an ameliorative effect of RSE-2 in dyslipidemia and its associated complications. Moreover, RSE-2 exhibited nonexistence of cytotoxicity against human liver cell lines. Convincingly, this study demonstrates that SD of RoC can be successfully fabricated by EPO, and have all the characteristics that are favourable for superior dissolution and better therapeutic response to the drug.

Preparation and Characterization of Furosemide Solid Dispersion with Enhanced Solubility and Bioavailability

Furosemide (FMD), as a potent circulating diuretic, is commonly used for the treatment of hypertension and edema arising from cardiac, renal, and hepatic failure. However, the low solubility of furosemide restricts its dissolution and bioavailability. In this study, Polyvinylpyrrolidone K30 (PVP-K30), mesoporous (Syloid 244FP, Syloid XDP 3050), and non-mesoporous (Aeroperl 300, Aerosil 200) silica were chosen as combined carrier to develop novel amorphous solid dispersions of furosemide, and then its dissolution and bioavailability were evaluated. Characterization study included XRD, DSC, TGA, SEM, FT-IR, and molecular docking. We found that FMD:PVP-K30:244FP achieved its best performance in terms of dissolution at the ratio of 1:1:1 when PVP-K30 and mesoporous silica Syloid 244FP (244FP) were chosen as combined carrier. SEM, DSC, and XRD studies indicated that furosemide existed in an amorphous form in the solid dispersion. FT-IR and molecular docking analysis showed that there might be an intermolecular interaction between FMD and the carrier. Moreover, the in vivo pharmacokinetics study revealed that the bioavailability of solid dispersion in rats had significant improvement. In particular, Cmax and AUClast were greatly increased by 2.69- and 2.08-fold in the solid dispersion (FMD-PVP-K30-244FP) group, respectively, and the relative bioavailability was 208.00%. In conclusion, the solid dispersion (FMD-PVP-K30-244FP) can significantly improve the solubility and oral bioavailability of furosemide. Mesoporous silica can be used as an excellent carrier material for furosemide, which can provide new ideas and methods for improving the stability of solid dispersion and further improving the dissolution of insoluble drugs. Graphical Abstract.

Acoustic levitation and high-resolution synchrotron X-ray powder diffraction: A fast screening approach of niclosamide amorphous solid dispersions

The levitation of samples in an acoustic field has been of interest in the preparation and study of amorphous solid dispersions (ASD). Here, niclosamide-polymer solutions were levitated in a multi-emitter single-axis acoustic levitator and analyzed for 10 min at a High-resolution synchrotron X-ray powder diffraction beamline. This assembly enabled high-quality and fast time-resolved measurements with microliter sample size and measurement of solvent evaporation and recrystallization of niclosamide (NCL). Polymers HPMCP-55S, HPMCP-50, HPMCP-55, Klucel®, and poloxamers were not able to form amorphous dispersions with NCL. Plasdone® and Soluplus® demonstrated excellent properties to form NCL amorphous dispersions, with the last showing superior solubility enhancement. Furthermore, this fast levitation polymer screening showed good agreement with results obtained by conventional solvent evaporation screening evaluated for five days in a stability study, carried out at 40 °C/75% RH. The study showed that acoustic levitation and high-resolution synchrotron combination opens up a new horizon with great potential for accelerating ASD formulation screening and analysis.

The Effects of Diosgenin on Hypolipidemia and Its Underlying Mechanism: A Review

Hyperlipidemia is a disorder of lipid metabolism, which is a major cause of coronary heart disease. Although there has been considerable progress in hyperlipidemia treatment, morbidity and risk associated with the condition continue to rise. The first-line treatment for hyperlipidemia, statins, has multiple side effects; therefore, development of safe and effective drugs from natural products to prevent and treat hyperlipidemia is necessary. Diosgenin is primarily derived from fenugreek (Trigonella foenum graecum) seeds, and is also abundant in medicinal herbs such as Dioscorea rhizome, Dioscorea septemloba, and Rhizoma polygonati, is a well-known steroidal sapogenin and the active ingredient in many drugs to treat cardiovascular conditions. There is abundant evidence that diosgenin has potential for application in correcting lipid metabolism disorders. In this review, we evaluated the latest evidence related to diosgenin and hyperlipidemia from clinical and animal studies. Additionally, we elaborate the pharmacological mechanism underlying the activity of diosgenin in treating hyperlipidemia in detail, including its role in inhibition of intestinal absorption of lipids, regulation of cholesterol transport, promotion of cholesterol conversion into bile acid and its excretion, inhibition of endogenous lipid biosynthesis, antioxidation and lipoprotein lipase activity, and regulation of transcription factors related to lipid metabolism. This review provides a deep exploration of the pharmacological mechanisms involved in diosgenin-hyperlipidemia interactions and suggests potential routes for the development of novel drug therapies for hyperlipidemia.