In vitro affinity maturation of HuCAL antibodies: complementarity determining region exchange and RapMAT technology

Rapid engineering of SARS-CoV-2 therapeutic antibodies to increase breadth of neutralization including BQ.1.1, CA.3.1, CH.1.1, XBB.1.16, and XBB.1.5

SARS-CoV-2 Omicron variant XBB.1.5 has shown extraordinary immune escape even for fully vaccinated individuals. There are currently no approved antibodies that neutralize this variant, and continued emergence of new variants puts immunocompromised and elderly patients at high risk. Rapid and cost-effective development of neutralizing antibodies is urgently needed. Starting with a single parent clone that neutralized the Wuhan-Hu-1 strain, antibody engineering was performed in iterative stages in real time as variants emerged using a proprietary technology called STage-Enhanced Maturation. An antibody panel that broadly neutralizes currently circulating Omicron variants was obtained by in vitro affinity maturation using phage display. The engineered antibodies show potent neutralization of BQ.1.1, XBB.1.16, and XBB.1.5 by surrogate virus neutralization test and pM K_D affinity for all variants. Our work not only details novel therapeutic candidates but also validates a unique general strategy to create broadly neutralizing antibodies to current and future SARS-CoV-2 variants.

Syngeneic homograft of framework regions enhances the affinity of the mouse anti-human epidermal receptor 2 single-chain antibody e23sFv

e23sFv is a HER2-targeted single-chain variable fragment (scFV) that was characterized as the targeting portion of a HER2-targeted tumour proapoptotic molecule in our previous study. In vitro antibody affinity maturation is a method to enhance antibody affinity either by complementarity-determining region (CDR) mutagenesis or by framework region (FR) engraftment. In the present study, the affinity of e23sFv was enhanced using two strategies. In one approach, site-directed mutations were introduced into the FRs of e23sFv (designated EMEY), and in the other approach e23sFv FRs were substituted with FRs from the most homologous screened antibodies (designated EX1 and EX2). Notably, EX1 derived from the FR engraftment strategy demonstrated a 4-fold higher affinity for HER2 compared with e23sFv and was internalized into HER2-overexpressing cells; however, EMEY and EX2 exhibited reduced affinity for HER2 and decreased internalization potential compared with EX1. The 3D structure of EX1 and the HER2-EX1 complex was acquired using molecular homology modelling and docking and the HER2 epitopes of EX1 and the molecular interaction energy of the EX1-HER2 complex were predicted. In the present study, it was demonstrated that scFv affinity improvement based on sequence alignment was feasible and effective. Moreover, the FR grafting strategy was indicated to be more effective and simple compared with site-directed mutagenesis to improve e23sFv affinity. In conclusion, it was indicated that the affinity-improved candidate EX1 may present a great potential for the diagnosis and treatment of HER2-overexpressing tumours.

Phage Display Derived Monoclonal Antibodies: From Bench to Bedside

Monoclonal antibodies (mAbs) have become one of the most important classes of biopharmaceutical products, and they continue to dominate the universe of biopharmaceutical markets in terms of approval and sales. They are the most profitable single product class, where they represent six of the top ten selling drugs. At the beginning of the 1990s, an in vitro antibody selection technology known as antibody phage display was developed by John McCafferty and Sir. Gregory Winter that enabled the discovery of human antibodies for diverse applications, particularly antibody-based drugs. They created combinatorial antibody libraries on filamentous phage to be utilized for generating antigen specific antibodies in a matter of weeks. Since then, more than 70 phage–derived antibodies entered clinical studies and 14 of them have been approved. These antibodies are indicated for cancer, and non-cancer medical conditions, such as inflammatory, optical, infectious, or immunological diseases. This review will illustrate the utility of phage display as a powerful platform for therapeutic antibodies discovery and describe in detail all the approved mAbs derived from phage display.

Phage Display Derived Monoclonal Antibodies: From Bench to Bedside

Monoclonal antibodies (mAbs) have become one of the most important classes of biopharmaceutical products, and they continue to dominate the universe of biopharmaceutical markets in terms of approval and sales. They are the most profitable single product class, where they represent six of the top ten selling drugs. At the beginning of the 1990s, an in vitro antibody selection technology known as antibody phage display was developed by John McCafferty and Sir. Gregory Winter that enabled the discovery of human antibodies for diverse applications, particularly antibody-based drugs. They created combinatorial antibody libraries on filamentous phage to be utilized for generating antigen specific antibodies in a matter of weeks. Since then, more than 70 phage-derived antibodies entered clinical studies and 14 of them have been approved. These antibodies are indicated for cancer, and non-cancer medical conditions, such as inflammatory, optical, infectious, or immunological diseases. This review will illustrate the utility of phage display as a powerful platform for therapeutic antibodies discovery and describe in detail all the approved mAbs derived from phage display.

Generation by phage display and characterization of drug-target complex-specific antibodies for pharmacokinetic analysis of biotherapeutics

Anti-idiotypic antibodies play an important role in pre-clinical and clinical development of therapeutic antibodies, where they are used for pharmacokinetic studies and for the development of immunogenicity assays. By using an antibody phage display library in combination with guided in vitro selection against various marketed drugs, we generated antibodies that recognize the drug only when bound to its target. We have named such specificities Type 3, to distinguish them from the anti-idiotypic antibodies that specifically detect free antibody drug or total drug. We describe the generation and characterization of such reagents for the development of ligand binding assays for drug quantification. We also show how these Type 3 antibodies can be used to develop very specific and sensitive assays that avoid the bridging format.

Abbreviations: BAP: bacterial alkaline phosphatase; CDR: complementarity-determining regions in VH or VL; Fab: antigen-binding fragment of an antibody; HRP: horseradish peroxidase; HuCAL®: Human Combinatorial Antibody Libraries; IgG: immunoglobulin G; LBA: ligand binding assay; LOQ: limit of quantitation; NHS: normal human serum; PK: pharmacokinetics; VH: variable region of the heavy chain of an antibody; VL: variable region of the light chain of an antibody.

Productive common light chain libraries yield diverse panels of high affinity bispecific antibodies

The commercial success of bispecific antibodies generally has been hindered by the complexities associated with generating appropriate molecules for both research scale and large scale manufacturing purposes. Bispecific IgG (BsIgG) based on two antibodies that use an identical common light chain can be combined with a minimal set of Fc mutations to drive heavy chain heterodimerization in order to address these challenges. However, the facile generation of common light chain antibodies with properties similar to traditional monoclonal antibodies has not been demonstrated and they have only been used sparingly. Here, we describe the design of a synthetic human antibody library based on common light chains to generate antibodies with biochemical and biophysical properties that are indistinguishable to traditional therapeutic monoclonal antibodies. We used this library to generate diverse panels of well-behaved, high affinity antibodies toward a variety of epitopes across multiple antigens, including mouse 4-1BB, a therapeutically important T cell costimulatory receptor. Over 200 BsIgG toward 4-1BB were generated using an automated purification method we developed that enables milligram-scale production of BsIgG. This approach allowed us to identify antibodies with a wide range of agonistic activity that are being used to further investigate the therapeutic potential of antibodies targeting one or more epitopes of 4-1BB.

Characterization of activating mutations of NOTCH3 in T-cell acute lymphoblastic leukemia and anti-leukemic activity of NOTCH3 inhibitory antibodies

Notch receptors have been implicated as oncogenic drivers in several cancers, the most notable example being NOTCH1 in T-cell acute lymphoblastic leukemia (T-ALL). To characterize the role of activated NOTCH3 in cancer, we generated an antibody that detects the neo-epitope created upon gamma-secretase cleavage of NOTCH3 to release its intracellular domain (ICD3), and sequenced the negative regulatory region (NRR) and PEST domain coding regions of NOTCH3 in a panel of cell lines. We also characterize NOTCH3 tumor-associated mutations that result in activation of signaling and report new inhibitory antibodies. We determined the structural basis for receptor inhibition by obtaining the first co-crystal structure of a NOTCH3 antibody with the NRR protein and defined two distinct epitopes for NRR antibodies. The antibodies exhibit potent anti-leukemic activity in cell lines and tumor xenografts harboring NOTCH3 activating mutations. Screening of primary T-ALL samples reveals that two of 40 tumors examined show active NOTCH3 signaling. We also identified evidence of NOTCH3 activation in 12 of 24 patient-derived orthotopic xenograft models, two of which exhibit activation of NOTCH3 without activation of NOTCH1. Our studies provide additional insights into NOTCH3 activation and offer a path forward for identification of cancers that are likely to respond to therapy with NOTCH3 selective inhibitory antibodies.

Stability engineering of anti-EGFR scFv antibodies by rational design of a lambda-to-kappa swap of the VL framework using a structure-guided approach

Phage-display technology facilitates rapid selection of antigen-specific single-chain variable fragment (scFv) antibodies from large recombinant libraries. ScFv antibodies, composed of a VH and VL domain, are readily engineered into multimeric formats for the development of diagnostics and targeted therapies. However, the recombinant nature of the selection strategy can result in VH and VL domains with sub-optimal biophysical properties, such as reduced thermodynamic stability and enhanced aggregation propensity, which lead to poor production and limited application. We found that the C10 anti-epidermal growth factor receptor (EGFR) scFv, and its affinity mutant, P2224, exhibit weak production from E. coli. Interestingly, these scFv contain a fusion of lambda3 and lambda1 V-region (LV3 and LV1) genes, most likely the result of a PCR aberration during library construction. To enhance the biophysical properties of these scFvs, we utilized a structure-based approach to replace and redesign the pre-existing framework of the VL domain to one that best pairs with the existing VH. We describe a method to exchange lambda sequences with a more stable kappa3 framework (KV3) within the VL domain that incorporates the original lambda DE-loop. The resulting scFvs, C10KV3_LV1DE and P2224KV3_LV1DE, are more thermodynamically stable and easier to produce from bacterial culture. Additionally, C10KV3_LV1DE and P2224KV3_LV1DE retain binding affinity to EGFR, suggesting that such a dramatic framework swap does not significantly affect scFv binding. We provide here a novel strategy for redesigning the light chain of problematic scFvs to enhance their stability and therapeutic applicability.

Solution Equilibrium Titration for High-Throughput Affinity Estimation of Unpurified Antibodies and Antibody Fragments

The generation of therapeutic antibodies with extremely high affinities down to the low picomolar range is today feasible with state-of-the art recombinant technologies. However, reliable and efficient identification of lead candidates with the desired affinity from a pool of thousands of antibody clones remains a challenge. Here, we describe a high-throughput procedure that allows reliable affinity screening of unpurified immunoglobulin G or antibody fragments. The method is based on the principle of solution equilibrium titration (SET) using highly sensitive electrochemiluminescence as a readout system. Because the binding partners are not labeled, the resulting KD represents a sound approximation of the real affinity. For screening, diluted bacterial lysates or cell culture supernatants are equilibrated with four different concentrations of a soluble target molecule, and unbound antibodies are subsequently quantified on 384-well Meso Scale Discovery (MSD) plates coated with the respective antigen. For determination of KD values from the resulting titration curves, fit models deduced from the law of mass action for 1:1 and 2:1 binding modes are applied to assess hundreds of interactions simultaneously. The accuracy of the method is demonstrated by comparing results from different screening campaigns from affinity optimization projects with results from detailed affinity characterization.

Characterization of binding mode of action of a blocking anti-platelet-derived growth factor (PDGF)-B monoclonal antibody, MOR8457, reveals conformational flexibility and avidity needed for PDGF-BB to bind PDGF receptor-β

Platelet derived growth factor-BB (PDGF-BB) is an important mitogen and cell survival factor during development. PDGF-BB binds PDGF receptor-β (PDGFRβ) to trigger receptor dimerization and tyrosine kinase activation. We present the pharmacological and biophysical characterization of a blocking PDGF-BB monoclonal antibody, MOR8457, and contrast this to PDGFRβ. MOR8457 binds to PDGF-BB with high affinity and selectivity, and prevents PDGF-BB induced cell proliferation competitively and with high potency. The structural characterization of the MOR8457-PDGF-BB complex indicates that MOR8457 binds with a 2:1 stoichiometry, but that binding of a single MOR8457 moiety is sufficient to prevent binding to PDGFRβ. Comparison of the MOR8457-PDGF-BB structure with that of the PDGFRβ-PDGF-BB complex suggested the potential reason for this was a substantial bending and twisting of PDGF-BB in the MOR8457 structure, relative to the structures of PDGF-BB alone, bound to a PDGF-BB aptamer or PDGFRβ, which makes it nonpermissive for PDGFRβ binding. These biochemical and structural data offer insights into the permissive structure of PDGF-BB needed for agonism as well as strategies for developing specific PDGF ligand antagonists.

High-affinity recombinant antibody fragments (Fabs) can be applied in peptide enrichment immuno-MRM assays

High-affinity antibodies binding to linear peptides in solution are a prerequisite for performing immuno-MRM, an emerging technology for protein quantitation with high precision and specificity using peptide immunoaffinity enrichment coupled to stable isotope dilution and targeted mass spectrometry. Recombinant antibodies can be generated from appropriate libraries in high-throughput in an automated laboratory and thus may offer advantages over conventional monoclonal antibodies. However, recombinant antibodies are typically obtained as fragments (Fab or scFv) expressed from E. coli, and it is not known whether these antibody formats are compatible with the established protocols and whether the affinities necessary for immunocapture of small linear peptides can be achieved with this technology. Hence, we performed a feasibility study to ask: (a) whether it is feasible to isolate high-affinity Fabs to small linear antigens and (b) whether it is feasible to incorporate antibody fragments into robust, quantitative immuno-MRM assays. We describe successful isolation of high-affinity Fab fragments against short (tryptic) peptides from a human combinatorial Fab library. We analytically characterize three immuno-MRM assays using recombinant Fabs, full-length IgGs constructed from these Fabs, or traditional monoclonals. We show that the antibody fragments show similar performance compared with traditional mouse- or rabbit-derived monoclonal antibodies. The data establish feasibility of isolating and incorporating high-affinity Fabs into peptide immuno-MRM assays.

Development of a recombinant antibody towards PAPP-A for immunohistochemical use in multiple animal species

The metalloproteinase, pregnancy-associated plasma protein-A (PAPP-A), is increasingly recognized as a modulator of insulin-like growth factor (IGF) signaling; it cleaves IGF binding proteins causing the release of bioactive IGF. Accumulating evidence supports an important role of PAPP-A in both normal physiology and under different pathological conditions. However, antibodies for the detection of PAPP-A in non-human tissues have been lacking, although needed for use with several animal models which are currently being developed. To develop a monoclonal antibody suitable for the immunohistochemical detection of PAPP-A, we therefore selected a phage-derived scFv antibody, PAC1, specifically recognizing an epitope of PAPP-A, which is highly conserved between multiple animal species. We first converted this antibody into bivalent IgG, and verified its ability to recognize PAPP-A in sections of formalin-fixed and paraffin-embedded tissue. For increased sensitivity, affinity maturation to sub-nanomolar affinity was then carried out. The resulting recombinant antibody, PAC1-D8-mIgG2a, detects PAPP-A specifically and sensitively in human tissue. In addition, this antibody allows detection of PAPP-A in non-human species. We demonstrate its usefulness for the visualization of PAPP-A in murine and porcine tissues.

An antibody that locks HER3 in the inactive conformation inhibits tumor growth driven by HER2 or neuregulin

HER2/HER3 dimerization resulting from overexpression of HER2 or neuregulin (NRG1) in cancer leads to HER3-mediated oncogenic activation of phosphoinositide 3-kinase (PI3K) signaling. Although ligand-blocking HER3 antibodies inhibit NRG1-driven tumor growth, they are ineffective against HER2-driven tumor growth because HER2 activates HER3 in a ligand-independent manner. In this study, we describe a novel HER3 monoclonal antibody (LJM716) that can neutralize multiple modes of HER3 activation, making it a superior candidate for clinical translation as a therapeutic candidate. LJM716 was a potent inhibitor of HER3/AKT phosphorylation and proliferation in HER2-amplified and NRG1-expressing cancer cells, and it displayed single-agent efficacy in tumor xenograft models. Combining LJM716 with agents that target HER2 or EGFR produced synergistic antitumor activity in vitro and in vivo. In particular, combining LJM716 with trastuzumab produced a more potent inhibition of signaling and cell proliferation than trastuzumab/pertuzumab combinations with similar activity in vivo. To elucidate its mechanism of action, we solved the structure of LJM716 bound to HER3, finding that LJM716 bound to an epitope, within domains 2 and 4, that traps HER3 in an inactive conformation. Taken together, our findings establish that LJM716 possesses a novel mechanism of action that, in combination with HER2- or EGFR-targeted agents, may leverage their clinical efficacy in ErbB-driven cancers.

Natural and man-made V-gene repertoires for antibody discovery

Antibodies are the fastest-growing segment of the biologics market. The success of antibody-based drugs resides in their exquisite specificity, high potency, stability, solubility, safety, and relatively inexpensive manufacturing process in comparison with other biologics. We outline here the structural studies and fundamental principles that define how antibodies interact with diverse targets. We also describe the antibody repertoires and affinity maturation mechanisms of humans, mice, and chickens, plus the use of novel single-domain antibodies in camelids and sharks. These species all utilize diverse evolutionary solutions to generate specific and high affinity antibodies and illustrate the plasticity of natural antibody repertoires. In addition, we discuss the multiple variations of man-made antibody repertoires designed and validated in the last two decades, which have served as tools to explore how the size, diversity, and composition of a repertoire impact the antibody discovery process.

Functional inhibition of transitory proteins by intrabody-mediated retention in the endoplasmatic reticulum

Intrabodies are recombinantly expressed intracellular antibody fragments that can be used to specifically bind and inhibit the function of cellular proteins of interest. Intrabodies can be targeted to various cell compartments by attaching an appropriate localization peptide sequence to them. An efficient strategy with a high success rate is to anchor intrabodies in the endoplasmatic reticulum where they can inhibit transitory target proteins by binding and preventing them to reach their site of action. Intrabodies can be assembled from antibody gene fragments from various sources into dedicated expression vectors. Conventionally, antibody cDNA sequences are derived from selected hybridoma cell clones that express antibodies with the desired specificity. Alternatively, appropriate clones can be isolated by affinity selection from an antibody in vitro display library. Here an evaluation of endoplasmatic reticulum targeted intrabodies with respect to other knockdown approaches is given and the characteristics of various intrabody expression vectors are discussed. A step by step protocol is provided that was repeatedly used to construct intrabodies derived from diverse antibody isotypes producing hybridoma cell clones. The inactivation of the cell surface receptor neural cell adhesion molecule (NCAM) by a highly efficacious novel endoplasmatic reticulum-anchored intrabody is demonstrated.

High affinity, developability and functional size: the holy grail of combinatorial antibody library generation

Since the initial description of phage display technology for the generation of human antibodies, a variety of selection methods has been developed. The most critical parameter for all in vitro-based approaches is the quality of the antibody library. Concurrent evolution of the libraries has allowed display and selection technologies to reveal their full potential. They come in different flavors, from naïve to fully synthetic and differ in terms of size, quality, method of preparation, framework and CDR composition. Early on, the focus has mainly been on affinities and thus on library size and diversity. Subsequently, the increased awareness of developability and cost of goods as important success factors has spurred efforts to generate libraries with improved biophysical properties and favorable production characteristics. More recently a major focus on reduction of unwanted side effects through reduced immunogenicity and improved overall biophysical behavior has led to a re-evaluation of library design.