Multilayer engineered nanoliposomes as a novel tool for oral delivery of lipopeptide-based vaccines against group A Streptococcus

Cholesterol as an inbuilt immunoadjuvant for a lipopeptide vaccine against group A Streptococcus infection

Peptide-based vaccines can trigger highly specific immune responses, although peptides alone are usually unable to confer strong humoral or cellular immunity. Consequently, peptide antigens are administered with immunostimulatory adjuvants, but only a few are safe and effective for human use. To overcome this obstacle, herein a peptide antigen was lipidated to effectively anchor it to liposomes and emulsion. A peptide antigen B cell epitope from Group A Streptococcus M protein was conjugated to a universal T helper epitope, the pan DR-biding epitope (PADRE), alongside a lipidic moiety cholesterol. Compared to a free peptide antigen, the lipidated version (LP1) adopted a helical conformation and self-assembled into small nanoparticles. Surprisingly, LP1 alone induced the same or higher antibody titers than liposomes or emulsion-based formulations. In addition, antibodies produced by mice immunized with LP1 were more opsonic than those induced by administering the antigen with incomplete Freund's adjuvant. No side effects were observed in the immunized mice and no excessive inflammatory immune responses were detected. Overall, this study demonstrated how simple conjugation of cholesterol to a peptide antigen can produce a safe and efficacious vaccine against Group A Streptococcus - the leading cause of superficial infections and the bacteria responsible for deadly post-infection autoimmune disorders.

Beyond the polysaccharide and glycoconjugate vaccines for Streptococcus pneumoniae: Does protein/peptide nanovaccines hold promises?

Streptococcus pneumoniae having almost 98 serotypes and being common cause of acute otitis media, pneumonia, bacteremia, meningitis etc., which results in high mortality and morbidity globally. Although vaccines like PCV-13 and PPV-23 are available, some problems like serotype replacement and poor immunogenicity in children, old age and immunocompromised people has been observed. To overcome these drawbacks protein/peptide-based vaccine can be a good strategy as these provides wide serotype coverage. However, immunogenicity of protein subunit vaccines is lower, that issue can be solved by using adjuvants. Recently nanoparticles as an adjuvant for vaccine delivery being used, which has provided not only good immunogenicity but also improved delivery and efficiency of protein-based vaccines. In this review we have discussed the latest advancement of nanoparticles-based protein/peptide vaccine delivery for Streptococcus pneumoniae.

Activity Relationship of Poly(ethylenimine)-Based Liposomes as Group A Streptococcus Vaccine Delivery Systems

Untreated group A Streptococcus (GAS) can lead to a range of life-threatening diseases, including rheumatic heart disease. To date, no therapeutic or prophylactic vaccines are commercially available to treat or prevent GAS infection. Development of a peptide-based subunit vaccine offers a promising solution, negating the safety issues of live-attenuated or inactive vaccines. Subunit vaccines administer small peptide fragments (antigens), which are typically poorly immunogenic. Therefore, these peptide antigens require formulation with an immune stimulant and/or vaccine delivery platform to improve their immunogenicity. We investigated polyelectrolyte complexes (PECs) and polymer-coated liposomes as self-adjuvanting delivery vehicles for a GAS B cell peptide epitope conjugated to a universal T-helper epitope and a synthetic toll-like receptor 2-targeting moiety lipid core peptide-1 (LCP-1). A structure-activity relationship of cationic PEC vaccines containing different external PEI-coatings (poly(ethylenimine); 10 kDa PEI, 25 kDa PEI, and a synthetic mannose-functionalized 25 kDa PEI) formed vaccines PEC-1, PEC-2, and PEC-3, respectively. All three PEC vaccines induced J8-specific systemic immunoglobulin G (IgG) antibodies when administered intranasally to female BALB/c mice without the use of additional adjuvants. Interestingly, PEC-3 induced the highest antibody titers among all tested vaccines, with the ability to effectively opsonize two clinically isolated GAS strains. A comparative study of PEC-2 and PEC-3 with liposome-based delivery systems was performed subcutaneously. LCP-1 was incorporated into a liposome formulation (DPPC, DPPG and cholesterol), and the liposomes were externally coated with PEI (25 kDa; Lip-2) or mannosylated PEI (25 kDa; Lip-3). All liposome vaccines induced stronger humoral immune responses compared to their PEC counterparts. Notably, sera of mice immunized with Lip-2 and Lip-3 produced significantly higher opsonic activity against clinically isolated GAS strains compared to the positive control, P25-J8 emulsified with the commercial adjuvant, complete Freund's adjuvant (CFA). This study highlights the capability of a PEI-liposome system to act as a self-adjuvanting vehicle for the delivery of GAS peptide antigens and protection against GAS infection.

Enhanced Osteogenesis Potential of MG-63 Cells through Sustained Delivery of VEGF via Liposomal Hydrogel

The challenges of using VEGF to promote osteoblastic differentiation include a short half-life and a narrow therapeutic window. A carrier system combining hydrogel and liposomes may improve the therapeutic efficacy of VEGF for bone regeneration. This study aimed to investigate the effects of delivery of VEGF via liposomal hydrogel on the osteogenesis of MG-63 cells. Liposomal hydrogel scaffold was fabricated and then characterized in terms of the morphological and chemical properties using FESEM and FTIR. In 2.5D analysis, the MG-63 cells were cultured on liposomal hydrogel + VEGF as the test group. The osteogenic effects of VEGF were compared with the control groups, i.e., hydrogel without liposomes + VEGF, osteogenic medium (OM) supplemented with a bolus of VEGF, and OM without VEGF. Cell morphology, viability, and differentiation and mineralization potential were investigated using FESEM, MTT assay, ALP activity, and Alizarin red staining. The characterization of scaffold showed no significant differences in the morphological and chemical properties between hydrogel with and without liposomes (p > 0.05). The final 2.5D culture demonstrated that cell proliferation, differentiation, and mineralization were significantly enhanced in the liposomal hydrogel + VEGF group compared with the control groups (p < 0.05). In conclusion, liposomal hydrogel can be used to deliver VEGF in a sustained manner in order to enhance the osteogenesis of MG-63 cells.

Recent Developments in Oral Delivery of Vaccines Using Nanocarriers

As oral administration of vaccines is the preferred route due to its high patient compliance and ability to stimulate both cellular and humoral immune responses, it is also associated with several challenges that include denaturation of vaccine components in the acidic environment of the stomach, degradation from proteolytic enzymes, and poor absorption through the intestinal membrane. To achieve effective delivery of such biomolecules, there is a need to investigate novel strategies of formulation development that can overcome the barriers associated with conventional vaccine delivery systems. Nanoparticles are advanced drug delivery carriers that provide target-oriented delivery by encapsulating vaccine components within them, thus making them stable against unfavorable conditions. This review provides a detailed overview of the different types of nanocarriers and various approaches that can enhance oral vaccine delivery.

The Development of Surface-Modified Liposomes as an Intranasal Delivery System for Group A Streptococcus Vaccines

Intranasal vaccine administration can overcome the disadvantages of injectable vaccines and present greater efficiency for mass immunization. However, the development of intranasal vaccines is challenged by poor mucosal immunogenicity of antigens and the limited availability of mucosal adjuvants. Here, we examined a number of self-adjuvanting liposomal systems for intranasal delivery of lipopeptide vaccine against group A Streptococcus (GAS). Among them, two liposome formulations bearing lipidated cell-penetrating peptide KALA and a new lipidated chitosan derivative (oleoyl-quaternized chitosan, OTMC) stimulated high systemic antibody titers in outbred mice. The antibodies were fully functional and were able to kill GAS bacteria. Importantly, OTMC was far more effective at stimulating antibody production than the classical immune-stimulating trimethyl chitosan formulation. In a simple physical mixture, OTMC also enhanced the immune responses of the tested vaccine, without the need for a liposome delivery system. The adjuvanting capacity of OTMC was further confirmed by its ability to stimulate cytokine production by dendritic cells. Thus, we discovered a new immune stimulant with promising properties for mucosal vaccine development.

The Influence of Nanoparticle on Vaccine Responses against Bacterial Infection

Nowadays, nanovaccine is considered as an evolving method in the field of vaccination to induce immunity in the human body against various diseases, including bacterial or viral diseases as well as virulent tumors. Nanovaccines are more efficient than traditional vaccines since they could potentially induce both humoral and cellular immune reactions. Various studies have shown that nanoparticles with multiple compounds have been designed as delivery systems or as adjuvants for vaccines. Nanoparticles could function as a drug delivery tool, as an adjuvant to promote antigen processing, and as an immune modulator to induce immune responses. These nanoparticles generate immune responses through activating immune cells as well as through the production of antibody responses. Design engineering of nanoparticles (NPs) used to produce nanovaccines to induce immunity in the human body needs comprehensive information about the ways they interact with the component of immune system. Challenges remain due to the lack of sufficient and comprehensive information about the nanoparticles' mode of action. Several studies have described the interactions between various classes of nanoparticles and the immune system in the field of prevention of bacterial infections. The results of some studies conducted in recent years on the interaction between nanoparticles and biosystems have considerably affected the methods used to design nanoparticles for medical applications. In this review, NPs’ characteristics influencing their interplay with the immune system were discussed in vivo. The information obtained could lead to the development of strategies for rationalizing the design of nanovaccines in order to achieve optimum induction of immune response.

Poly(hydrophobic Amino Acids) and Liposomes for Delivery of Vaccine against Group A Streptococcus

Adjuvants and delivery systems are essential components of vaccines to increase immunogenicity against target antigens, particularly for peptide epitopes (poor immunogens). Emulsions, nanoparticles, and liposomes are commonly used as a delivery system for peptide-based vaccines. A Poly(hydrophobic amino acids) delivery system was previously conjugated to Group A Streptococcus (GAS)-derived peptide epitopes, allowing the conjugates to self-assemble into nanoparticles with self adjuvanting ability. Their hydrophobic amino acid tail also serves as an anchoring moiety for the peptide epitope, enabling it to be integrated into the liposome bilayer, to further boost the immunological responses. Polyleucine-based conjugates were anchored to cationic liposomes using the film hydration method and administered to mice subcutaneously. The polyleucine-peptide conjugate, its liposomal formulation, and simple liposomal encapsulation of GAS peptide epitope induced mucosal (saliva IgG) and systemic (serum IgG, IgG1 and IgG2c) immunity in mice. Polyleucine acted as a potent liposome anchoring portion, which stimulated the production of highly opsonic antibodies. The absence of polyleucine in the liposomal formulation (encapsulated GAS peptide) induced high levels of antibody titers, but with poor opsonic ability against GAS bacteria. However, the liposomal formulation of the conjugated vaccine was no more effective than conjugates alone self-assembled into nanoparticles.

Oral organic nanovaccines against bacterial and viral diseases

Vaccines have saved millions of humans and animals from deadly diseases. Many vaccines are still under development to fight against lethal diseases. Indeed, subunit vaccines are a versatile approach with several advantageous attributes, but they lack strong immunogenicity. Nanotechnology is an avenue to vaccine development because nanoparticles may serve as nanocarriers and adjuvants, which are critical aspects for oral vaccines. This review provides an update of oral organic nanovaccines, describing suitable nanomaterials for oral vaccine design and recent (last five-year view) oral nanovaccine developments to fight against those principal pathogens causing human and animal diseases.

Cationic inulin as a new surface decoration hydrocolloid for improving the stability of liposomal nanocarriers

The aim of the present study was to investigate the cationization of inulin with Williamson's etherification method, and compare cationic inulin with unmodified inulin coatings for stabilizing nanoliposomes (NLPs). The synthetized cationic inulin was characterized by Fourier transforms infrared (FT-IR) spectroscopy, carbon hydrogen nitrogen (CHN) elemental analysis, and energy-dispersive X-ray spectroscopy. Three concentrations of inulin and cationic inulin (1, 2, and 4 mg/mL) were used for the coating of NLPs. The concentration of 4 mg/mL was found to be optimal for inulin and cationic inulin as surface coating, on the basis of particle size, zeta potential, and microstructural morphology. The lowest values of particle size (93.41 nm), polydispersity index (0.25), and negative zeta potential (-24.41 mV) were related to the coated NLPs with cationic inulin at a concentration of 4 mg/mL. The transmission electron microscopy image of the coated NLPs with cationic inulin exhibited a spherical and core-shell structure. The coated NLPs with cationic inulin showed the highest thermal stability, physical stability, and oxidative stability. In conclusion, cationic inulin coating conferred a stronger protection than the unmodified inulin coating of NLPs. The technique developed here can be applied for surface decoration of NLPs to improve their stability.

New modular platform based on multi-adjuvanted amphiphilic chitosan nanoparticles for efficient lipopeptide vaccine delivery against group A streptococcus

An effective vaccine against group A streptococcus (GAS) is highly desirable for definitive control of GAS infections. In the present study, two variants of amphiphilic chitosan nanoparticles-based GAS vaccines were developed. The vaccines were primarily composed of encapsulated KLH protein (a source of T helper cell epitopes) and lipidated M-protein derived B cell peptide epitope (lipoJ14) within the amphiphilic structure of nanoparticles. The only difference between them was one of the nanoparticles vaccines received additional surface coating with poly (I:C). The formulated vaccines exhibited nanosized particles within the range of 220–240 nm. Cellular uptake study showed that nanoparticles vaccine without additional poly (I:C) coating has greater uptake by dendritic cells and macrophages compared to nanoparticles vaccine that was functionalized with poly (I:C). Both vaccines were found to be safe in mice and showed negligible cytotoxicity against HEK293 cells. Upon immunization in mice, both nanoparticle vaccines produced high antigen-specific antibodies titres that were regulated by a balanced Th1 and Th2 response compared to physical mixture. These antibodies elicited high opsonic activity against the tested GAS strains. Overall, our data demonstrated that amphiphilic chitosan nanoparticles platform induced a potent immune response even without additional inclusion of poly (I:C).

Current Prospects in Peptide-Based Subunit Nanovaccines

Vaccination renders protection against pathogens via stimulation of the body's natural immune responses. Classical vaccines that utilize whole organisms or proteins have several disadvantages, such as induction of undesired immune responses, poor stability, and manufacturing difficulties. The use of minimal immunogenic pathogen components as vaccine antigens, i.e., peptides, can greatly reduce these shortcomings. However, subunit antigens require a specific delivery system and immune adjuvant to increase their efficacy. Recently, nanotechnology has been extensively utilized to address this issue. Nanotechnology-based formulation of peptide vaccines can boost immunogenicity and efficiently induce cellular and humoral immune responses. This chapter outlines the recent developments and advances of nano-sized delivery platforms for peptide antigens, including nanoparticles composed of polymers, peptides, lipids, and inorganic materials.

DENV-Mimetic Polymersome Nanoparticles Bearing Multi-Epitope Lipopeptides Antigen as the Next-Generation Dengue Vaccine

Dengue remains a severe threat to public health. The safety and efficacy of the licensed dengue vaccine is not clinically satisfactory, which necessitate the need of new approach in designing an effective dengue vaccine without eliciting adverse reaction. Herein, we have designed a lipidated multi-epitope peptide vaccine (LipoDV) that can elicit highly targeted humoral and cell-mediated immune responses. To improve its immunogenicity, LipoDV was presented on the surface of MPLA-functionalized polymersome nanoparticles (PNs-LipoDV-MPLA). The as-constructed vaccine delivery platform resembles the structural morphology of DENV owing to its spherical nanoscale particle size and surface immunostimulatory properties given by LipoDV and MPLA that emulating the functional role of DENV E and prM/M proteins respectively. A proof-of-concept study demonstrated that BALB/c mice immunized with PNs-LipoDV-MPLA induced a stronger antigen-specific antibody response with an enhanced cell-mediated immunity as characterized by the elevated IFN-γ secretion in comparison to other tested vaccine candidates which possess a lesser structural trait of DENV. The DENV-mimicking nanoparticles vaccine exhibited negligible toxicity as analyzed by hemolytic test, MTT assay, histopathological examination and abnormal toxicity test on immunized mice. Collectively, our study provides a strong foundation in designing an effective peptide-based vaccine delivery platform against DENV infection.

Liposomes for the Delivery of Lipopeptide Vaccines

Liposomes, which are artificial phospholipid vesicles with a bilayer membrane structure, have been developed and evaluated as a promising delivery system for vaccines. Here, we describe a procedure for the encapsulation of lipopeptide vaccines into liposomes. A liposomal formulation of lipid-core peptide was prepared via thin-film hydration followed by extrusion. The physicochemical properties of the liposomes, including their size, polydispersity, surface charge, and morphology, were analyzed using dynamic light scattering and transmission electron microscopy.

Recent progress in synthetic self-adjuvanting vaccine development

Vaccination is a proven way to protect individuals against many infectious diseases, as currently highlighted in the global COVID-19 pandemic. Peptides- or small molecule antigen-based vaccination offer advantages over the...

Polymer-Peptide Conjugate Vaccine for Oral Immunization

The copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, well-known as "click" reaction, is widely used in organic synthesis, medicinal chemistry, and polymer science for the conjugation of molecular entities of all sizes. In this protocol, B-cell epitope J8, derived from group A Streptococcus (GAS) M protein, and universal T-helper epitope PADRE were conjugated to poly(methyl acrylate) (PMA) to form a self-assembled nanoparticle vaccine candidate (PMA-P-J8). The vaccine construct was orally administered to mice in a single dose of 30 μg, resulting in the production of a high number of serum (IgG) and salivary (IgA) antibodies.

Preparation of Trimethyl Chitosan-Based Polyelectrolyte Complexes for Peptide Subunit Vaccine Delivery

A variety of delivery vehicles have been explored as adjuvanting/delivery platforms for peptide-based subunit vaccines. Polysaccharide-based systems have been found to be especially attractive due to their immune stimulating properties, biodegradability, biocompatibility, and low toxicity. Among them, chitosan and its derivatives are the most common cationic nanocarriers used for the delivery of antigens. Trimethyl chitosan (TMC) is a partially quaternized, water-soluble, and mucoadhesive derivative of chitosan. This chapter describes the preparation of a TMC-based polyelectrolyte complex as a delivery system for peptide subunit vaccines.

Recent advances on chitosan as an adjuvant for vaccine delivery

Chitosan (CS) is a natural polymer derived from chitin that has wide applications in drugs, vaccines, and antigen delivery. The distinctive mucoadhesive, biocompatibility, biodegradable, and less toxic properties of chitosan compared to the currently used vaccine adjuvants made it a promising candidate for use as an adjuvant/carrier in vaccine delivery. In addition, chitosan exhibits intrinsic immunomodulating properties making it a suitable adjuvant in preparing vaccines delivery systems. Nanoparticles (NPs) of chitosan and its derivatives loaded with antigen have been shown to induce cellular and humoral responses. Versatility in the physicochemical properties of chitosan can provide an excellent opportunity to engineer antigen-specific adjuvant/delivery systems. This review discusses the recent advances of chitosan and its derivatives as adjuvants in vaccine deliveryand the published literature in the last fifteen years. The impact of physicochemical properties of chitosan on vaccine formulation has been described in detail. Applications of chitosan and its derivatives, their physicochemical properties, and mechanisms in enhancing immune responses have been discussed. Finally, challenges and future aspects of chitosan use has been pointed out.

Engineering Nano- and Microparticles as Oral Delivery Vehicles to Promote Intestinal Lymphatic Drug Transport

Targeted oral delivery of a drug via the intestinal lymphatic system (ILS) has the advantages of protecting against hepatic first-pass metabolism of the drug and improving its pharmacokinetic performance. It is also a promising route for the oral delivery of vaccines and therapeutic agents to induce mucosal immune responses and treat lymphatic diseases, respectively. This article describes the anatomical structures and physiological characteristics of the ILS, with an emphasis on enterocytes and microfold (M) cells, which are the main gateways for the transport of particulate delivery vehicles across the intestinal epithelium into the lymphatics. A comprehensive overview of recent advances in the rational engineering of particulate vehicles, along with the challenges and opportunities that they present for improving ILS drug delivery, is provided, and the mechanisms by which such vehicles target and transport through enterocytes or M cells are discussed. The use of naturally sourced materials, such as yeast microcapsules and their derived polymeric β-glucans, as novel ILS-targeting delivery vehicles is also reviewed. Such use is the focus of an emerging field of research. Their potential use in the oral delivery of nucleic acids, such as mRNA vaccines, is proposed.

Coating of betanin and carvone Co-loaded nanoliposomes with synthesized cationic inulin: A strategy for enhancing the stability and bioavailability

Betanin (BET) and carvone (CAR) as antioxidant and antibacterial compounds were co-loaded in the coated nanoliposomes (NLPs) with cationic inulin to improve their stability and bioavailability. A cationic inulin was successfully synthesized and used for surface coating of the NLPs. The zeta potential, particle size, and PDI values of the coated NLPs were 21.70 ± 7.00 mV, 143.5 ± 15.2 nm, and 0.35 ± 0.03 respectively. The encapsulation efficiency values of the coated NLPs for BE and CAR were 86.1 ± 3.9 and 77.2 ± 5.2 %, respectively. Electron microscopy results showed that the coated NLPs had spherical and core-shell structures. The slowest sustained release profile in the simulated gastrointestinal condition was obtained for the coated NLPs. The physical and oxidative stability of NLPs, as well as the physical stability of loaded compounds were improved by surface coating. In conclusion, the developed nanocarrier is a suitable platform to use all benefits of BET and CAR in the food industry.

Demystifying particle-based oral vaccines

Introduction: The oral route of vaccination is pain- and needle-free and can induce systemic and mucosal immunity. However, gastrointestinal barriers and antigen degradation impose significant hurdles in the development of oral vaccines. Live attenuated viruses and bacteria can overcome these barriers but at the risk of introducing safety concerns. As an alternative, particles have been investigated for antigen protection and delivery, yet there are no FDA-approved oral vaccines based on particle-based delivery systems. Our objective was to discover underlying determinants that can explain the current inadequacies and identify paradigms that can be implemented in future for successful development of oral vaccines relying on particle-based delivery systems.Areas covered: We reviewed literature related to the use of particles for oral vaccination and placed special emphasis on formulation characteristics and administration schedules to gain an insight into how these parameters impact production of antigen-specific antibodies in systemic and mucosal compartments.Expert opinion: Despite the long history of vaccines, particle-based oral vaccination is a relative new field with the first study published in 1989. Substantial variability exists between different studies with respect to dosing schedules, number of doses, and the amount of vaccine per dose. Most studies have not used adjuvants in the formulations. Better standardization in vaccination parameters is required to improve comparison between experiments, and adjuvants should be used to enhance the systemic and mucosal immune responses and to reduce the number of doses, which will make oral vaccines more attractive.

Recent advances in nano/microparticle-based oral vaccines

Background

Vaccines are often recognized as one of the most cost-effective public health interventions in controlling infectious diseases. Most pathogens infiltrate the body from mucosal sites, primarily from the oral and pulmonary region and reach the systemic circulation where disease manifestation starts. Traditional needle-based vaccines are usually not capable of inducing immunity at the mucosal sites where pathogen infiltrates start, but induces systemic immunity. In contrast to needle-based vaccines, mucosally administered vaccines induce immunity at both the mucosal sites and systemically. The oral route of immunization is the most convenient way to administer the vaccines. However, due to the complicated and hostile gastrointestinal structure and environment, vaccines need to overcome major hurdles while retaining their stability and immunogenicity.

Area covered

This review will briefly discuss different barriers to oral vaccine development. It gives a brief overview of different types of nano/microparticle-based oral vaccines and discusses how physicochemical characteristics of the particles influence overall immunity after oral immunization.

Expert opinion

Formulation strategies using novel lipid and polymer-based nano/microparticle platforms retain stability and antigenicity of vaccines against the harsh gastrointestinal condition. The physicochemical properties of particles can be uniquely tailored to prolong the release of antigens, and attached ligands (M-cells and APC-ligands) can precisely target uptake by immune cells. These represent viable strategies for efficient delivery of oral vaccines.

Polyethylenimine quantity and molecular weight influence its adjuvanting properties in liposomal peptide vaccines

We recently reported that polyethylenimine (PEI; molecular weight of 600 Da) acted as a vaccine adjuvant for liposomal group A Streptococcus (GAS) vaccines, eliciting immune responses in vivo with IgG antibodies giving opsonic activity against five Australian GAS clinical isolates. However, to date, no investigation comparing the structure-activity relationship between the molecular weight of PEI and its adjuvanting activity in vaccine development has been performed. We hypothesized that the molecular weight and quantity of PEI in a liposomal vaccine will impact its adjuvanting properties. In this study, we successfully formulated liposomes containing different molecular weights of PEI (600, 1800, 10k and 25k Da) and equivalents of PEI (0.5, 1 and 2) of branched PEI. Outbred mice were administrated the vaccine formulations intranasally, and the mice that received a high ratio of PEI 600 reported a stronger immune response than the mice that received a lower ratio of PEI 600. Interestingly, mice that received the same quantity of PEI 600, PEI 10k and PEI 25k showed similar immune responses in vivo and in vitro. This comparative study highlights the ratio of PEI present in the liposome vaccines impacts adjuvanting activity, however, PEI molecular weight did not significantly enhance its adjuvanting properties. We also report that the stability of PEI liposomes is critical for vaccines to elicit the desired immune response.

Advances in Oral Subunit Vaccine Design

Many pathogens invade the host at the intestinal surface. To protect against these enteropathogens, the induction of intestinal secretory IgA (SIgA) responses is paramount. While systemic vaccination provides strong systemic immune responses, oral vaccination is the most efficient way to trigger protective SIgA responses. However, the development of oral vaccines, especially oral subunit vaccines, is challenging due to mechanisms inherent to the gut. Oral vaccines need to survive the harsh environment in the gastrointestinal tract, characterized by low pH and intestinal proteases and need to reach the gut-associated lymphoid tissues, which are protected by chemical and physical barriers that prevent efficient uptake. Furthermore, they need to surmount default tolerogenic responses present in the gut, resulting in suppression of immunity or tolerance. Several strategies have been developed to tackle these hurdles, such as delivery systems that protect vaccine antigens from degradation, strong mucosal adjuvants that induce robust immune responses and targeting approaches that aim to selectively deliver vaccine antigens towards specific immune cell populations. In this review, we discuss recent advances in oral vaccine design to enable the induction of robust gut immunity and highlight that the development of next generation oral subunit vaccines will require approaches that combines these solutions.

COVID-19 and cancer: From basic mechanisms to vaccine development using nanotechnology

•

Shows updated understanding of SARS-CoV-2, including the interaction between ACE 2 and the viral spike protein.

•

More effective vaccines are required for immunocompromised cancer patients.

•

Cancer alters the immune system through different levels of D-Dimer, albumin, prothrombin, and neutrophils.

•

Nanomaterials assist vaccine delivery, including viral vector and mRNA vaccines with lipid nanoparticles.

Coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is a global pandemic which has induced unprecedented ramifications, severely affecting our society due to the long incubation time, unpredictably high prevalence and lack of effective vaccines. One of the interesting notions is that there is an association between COVID-19 and cancer. Cancer patients seem to exhibit exacerbated conditions and a higher mortality rate when exposed to the virus. Therefore, vaccines are the promising solution to minimise the problem amongst cancer patients threatened by the new viral strains. However, there are still limitations to be considered, including the efficacy of COVID vaccines for immunocompromised individuals, possible interactions between the vaccine and cancer, and personalised medicine. Not only to eradicate the pandemic, but also to make it more effective for immunocompromised patients who are suffering from cancer, a successful vaccine platform is required through the implementation of nanotechnology which can also enable scalable manufacturing and worldwide distribution along with its faster and precise delivery. In this review, we summarise the current understanding of COVID-19 with clinical perspectives, highlighting the association between COVID-19 and cancer, followed by a vaccine development for this association using nanotechnology. We suggest different administration methods for the COVID-19 vaccine formulation options. This study will contribute to paving the way towards the prevention and treatment of COVID-19, especially for the immunocompromised individuals.

The Application of Mucoadhesive Chitosan Nanoparticles in Nasal Drug Delivery

Mucosal delivery of antigens can induce both humoral and cellular immune responses. Particularly, the nasal cavity is a strongly inductive site for mucosal immunity among several administration routes, as it is generally the first point of contact for inhaled antigens. However, the delivery of antigens to the nasal cavity has some disadvantages such as rapid clearance and disposition of inhaled materials. For these reasons, remarkable efforts have been made to develop antigen delivery systems which suit the nasal route. The use of nanoparticles as delivery vehicles enables protection of the antigen from degradation and sustains the release of the loaded antigen, eventually resulting in improved vaccine and/or drug efficacy. Chitosan, which exhibits low toxicity, biodegradability, good cost performance, and strong mucoadhesive properties, is a useful material for nanoparticles. The present review provides an overview of the mucosal immune response induced by nanoparticles, recent advances in the use of nanoparticles, and nasal delivery systems with chitosan nanoparticles.

Lipids as Activators of Innate Immunity in Peptide Vaccine Delivery

BACKGROUND

Innate immune system plays an important role in pathogen detection and the recognition of vaccines, mainly through pattern recognition receptors (PRRs) that identify pathogen components (danger signals). One of the typically recognised bacterial components are lipids in conjugation with peptides, proteins and saccharides. Lipidic compounds are readily recognised by the immune system, and thus are ideal candidates for peptide- based vaccine delivery. Thus, bacterial or synthetic lipids mixed with, or conjugated to, antigens have shown adjuvant properties. These systems have many advantages over traditional adjuvants, including low toxicity and good efficacy for stimulating mucosal and systemic immune responses.

METHODS

The most recent literature on the role of lipids in stimulation of immune responses was selected for this review. The vast majority of reviewed papers were published in the last decade. Older but significant findings are also cited.

RESULTS

This review focuses on the development of lipopeptide vaccine systems including application of palmitic acid, bacterial lipopeptides, glycolipids and the lipid core peptide and their routes of administration. The use of liposomes as a delivery system that incorporates lipopeptides is discussed. The review also includes a brief description of immune system in relation to vaccinology and discussion on vaccine delivery routes.

CONCLUSION

Lipids and their conjugates are an ideal frontrunner in the development of safe and efficient vaccines for different immunisation routes.

Development of Polyelectrolyte Complexes for the Delivery of Peptide-Based Subunit Vaccines against Group A Streptococcus

Peptide subunit vaccines hold great potential compared to traditional vaccines. However, peptides alone are poorly immunogenic. Therefore, it is of great importance that a vaccine delivery platform and/or adjuvant that enhances the immunogenicity of peptide antigens is developed. Here, we report the development of two different systems for the delivery of lipopeptide subunit vaccine (LCP-1) against group A streptococcus: polymer-coated liposomes and polyelectrolyte complexes (PECs). First, LCP-1-loaded and alginate/trimethyl chitosan (TMC)-coated liposomes (Lip-1) and LCP-1/alginate/TMC PECs (PEC-1) were examined for their ability to trigger required immune responses in outbred Swiss mice; PEC-1 induced stronger humoral immune responses than Lip-1. To further assess the adjuvanting effect of anionic polymers in PECs, a series of PECs (PEC-1 to PEC-5) were prepared by mixing LCP-1 with different anionic polymers, namely alginate, chondroitin sulfate, dextran, hyaluronic acid, and heparin, then coated with TMC. All produced PECs had similar particle sizes (around 200 nm) and surface charges (around + 30 mV). Notably, PEC-5, which contained heparin, induced higher antigen-specific systemic IgG and mucosal IgA titers than all other PECs. PEC systems, especially when containing heparin and TMC, could function as a promising platform for peptide-based subunit vaccine delivery for intranasal administration.

Recent Advances in Encapsulation, Protection, and Oral Delivery of Bioactive Proteins and Peptides using Colloidal Systems

There are many areas in medicine and industry where it would be advantageous to orally deliver bioactive proteins and peptides (BPPs), including ACE inhibitors, antimicrobials, antioxidants, hormones, enzymes, and vaccines. A major challenge in this area is that many BPPs degrade during storage of the product or during passage through the human gut, thereby losing their activity. Moreover, many BPPs have undesirable taste profiles (such as bitterness or astringency), which makes them unpleasant to consume. These challenges can often be overcome by encapsulating them within colloidal particles that protect them from any adverse conditions in their environment, but then release them at the desired site-of-action, which may be inside the gut or body. This article begins with a discussion of BPP characteristics and the hurdles involved in their delivery. It then highlights the characteristics of colloidal particles that can be manipulated to create effective BPP-delivery systems, including particle composition, size, and interfacial properties. The factors impacting the functional performance of colloidal delivery systems are then highlighted, including their loading capacity, encapsulation efficiency, protective properties, retention/release properties, and stability. Different kinds of colloidal delivery systems suitable for encapsulation of BPPs are then reviewed, such as microemulsions, emulsions, solid lipid particles, liposomes, and microgels. Finally, some examples of the use of colloidal delivery systems for delivery of specific BPPs are given, including hormones, enzymes, vaccines, antimicrobials, and ACE inhibitors. An emphasis is on the development of food-grade colloidal delivery systems, which could be used in functional or medical food applications. The knowledge presented should facilitate the design of more effective vehicles for the oral delivery of bioactive proteins and peptides.

Development of natural and unnatural amino acid delivery systems against hookworm infection

Peptide-based vaccines consist of short antigen fragments derived from a specific pathogen. Alone, these peptide fragments are poorly or non-immunogenic; however, when incorporated into a proper delivery system, they can trigger strong immune responses. To eliminate the need for toxic and often ineffective oral adjuvants, we designed single molecule-based self-adjuvating vaccines against hookworms using natural and unnatural hydrophobic amino acids. Two vaccine conjugates were synthesized, consisting of B-cell epitope p3, derived from the hookworm Na-APR-1 protein; universal T-helper peptide P25; and either double copies of unnatural lipoamino acid (2-amino-D,L-eicosanoic acid), or ten copies of the natural amino acid leucine. After challenge with the model hookworm, Nippostrongylus brasiliensis, mice orally immunized with the conjugates, but without adjuvant, generated antibody responses against the hookworm epitope, resulting in significantly reduced worm and egg burdens compared to control mice. We have demonstrated that vaccine nanoparticles composed exclusively of natural amino acids can be effective even when administered orally.

Polyacrylate-Peptide Antigen Conjugate as a Single-Dose Oral Vaccine against Group A Streptococcus

Group A Streptococcus (GAS)-associated rheumatic heart disease is a leading cause of death caused by GAS infection. While antibiotics can treat the infection in most cases, growing antibiotic resistance, late medical intervention, and recurrent infection are major obstacles to the effective treatment of GAS-associated diseases. As GAS infection typically originates from the bacterial colonization of mucosal tissue in the throat, an oral vaccine that can generate both systemic and mucosal immune responses would solve problems associated with traditional medical interventions. Moreover, orally delivered vaccines are more easily administered and less expensive for mass immunization. In this study, the B-cell epitope J8, derived from GAS M protein, and universal T-helper Pan HLA-DR-binding epitope peptide (PADRE), were conjugated to poly (methyl acrylate) (PMA) to form a self-assembled nanoparticle vaccine candidate (PMA-P-J8). Strong systemic and mucosal immune responses were induced upon single oral immunization of mice with the conjugate. The antibodies generated were opsonic against GAS clinical isolates as measured after boost immunization. Thus, we developed a simple conjugate as an effective, adjuvant-free oral peptide-based vaccine.

Lipopeptide-Based Oral Vaccine Against Hookworm Infection

Background

The human hookworm, Necator americanus, is a parasite that infects almost half a billion people worldwide. Although treatment is available, vaccination is favorable to combat the spread of this parasite due to its wide distribution and continuous reinfection cycle in endemic communities.

Methods

We have designed a lipopeptide oral delivery system using a B-cell epitope derived from the aspartic protease Na-APR-1 from N americanus, attached to a T-helper epitope. Lipopeptides were self-assembled into nanoparticles or entrapped in liposomes that were electrostatically coated with alginate and trimethyl chitosan polymer shields. The adjuvant-free vaccine candidates were orally administered to mice and generated a humoral immune response against both peptide antigen, and the parent protein in the hookworm gut.

Results

The vaccine candidates were evaluated in a rodent hookworm challenge model, resulting in up to 98% and 99% decreases in mean intestinal worm and egg burdens in immunized mice, respectively.

Conclusions

Lipopeptide survived the gastrointestinal conditions, induced humoral immune responses and drived protection against parasite challenge infection.

Polyelectrolyte-Based Platforms for the Delivery of Peptides and Proteins

The use of peptides and proteins in the pharmaceutical field has increased dramatically over recent years. They have been especially relevant to advances in the treatment of cancer, rheumatoid arthritis, leukemia, and cardiovascular, ophthalmological, metabolic, and infectious diseases. Despite the great potential of peptides and proteins, their use in pharmaceuticals has failed to reach its full potential because of some outstanding challenges. They are unstable under storage conditions and in biological milieus, and their high molecular weight limits permeation through biological membranes. A variety of delivery systems have been investigated to overcome these limitations. Polyelectrolytes (PEs) are molecules that bear multiple negative or positive charges. These molecules play an important role in various platforms relating to the delivery of peptide/protein-based drugs and subunit vaccines. The most commonly utilized PEs include chitosan, alginate, chondroitin sulfate, and poly(γ-glutamic acid). PE-based delivery systems, such as polyelectrolyte complexes (PECs), PE-coated nanocarriers, and PE multilayers, were designed to protect peptides and proteins from degradation and facilitate their absorption. These delivery systems are especially effective when administered orally or intranasally. This review emphasizes the important role of PEs and PE-based delivery vehicles in peptide/protein-based drugs and vaccines.

Cholic Acid-based Delivery System for Vaccine Candidates against Group A Streptococcus

Peptide-based subunit vaccines require an immunostimulant (adjuvant) and/or delivery system to protect the antigenic peptide from degradation and induce the desired immunity. Currently available adjuvants are either too toxic for human use (experimental adjuvants) or they are limited for use in particular vaccines or licensed countries (commercial adjuvants). Therefore, there is an immediate need for novel adjuvants that are both safe and effective. Herein, we assessed the ability of cholic acid (a major bile acid) as a nontoxic, biodegradable, human-derived, potent vaccine delivery system. An antigenic peptide derived from Group A Streptococcus was conjugated to hydrophobic cholic acid via solid phase peptide synthesis to produce lipopeptide that self-assembled into rod-like nanoparticles under aqueous conditions. Following intranasal immunization in mice, this lipopeptide was capable of inducing the production of opsonic epitope-specific antibodies on its own and in liposomal formulation. The cholic acid-based conjugate induced significantly stronger humoral immune responses than cholera toxin-based adjuvant. Thus, we demonstrated, for the first time, capability of the human-derived lipid to act as a built-in immunoadjuvant for vaccines.

Structure-activity relationship of group A streptococcus lipopeptide vaccine candidates in trimethyl chitosan-based self-adjuvanting delivery system

Synthetic peptide vaccines based on epitopes derived from the conserved region of M-protein are proving to be a realistic option for protection against group A streptococcus (GAS). However, peptide epitopes alone are poorly immunogenic due to lack of pathogen-associated structural patterns. Therefore, we developed a GAS peptide vaccine based on combined lipidic TLR 2 agonist and self-adjuvanting polymers. We synthesized three α-poly-l-glutamic acid (PGA) conjugated lipopeptides composed of 2-amino-d,l-hexadecanoic acid, GAS B-cell peptide epitope J8 (QAEDKVKQSREAKKQVEKALKQLEDKVQ) and universal T-helper epitope PADRE (AKFVAAWTLKAAA) in different spatial arrangements. The anionic lipopeptide conjugates formed nanoparticles via ionic-complexation with a cationic polymer, trimethyl chitosan (TMC). We demonstrated that the spatial arrangement of vaccine components has a significant influence on peptide conformation and particle formation and, as such, contributes to the differential efficacy and opsonin-mediated killing potential of nanovaccines. Nanoparticles carrying branched helical lipopeptide with T-helper epitope on free N-termini (NP3) stimulated the most potent humoral immune responses. Lipopeptides without TMC (LP1-LP3) and TMC nanoparticles of peptide alone (without lipid) NP (P1) were poor inducers of antibody production, indicating that both TMC and lipid are required to induce a strong opsonic immune response.

Self-assembly of trimethyl chitosan and poly(anionic amino acid)-peptide antigen conjugate to produce a potent self-adjuvanting nanovaccine delivery system

Short peptides derived from virulent pathogen proteins are promising antigens for the development of vaccines against infectious diseases. However, in order to mimic the danger signals associated with natural infection and stimulate an adaptive immune response, peptide antigens must be co-delivered with immune adjuvants. In this study, a group A streptococcus (GAS) M-protein derived B-cell epitope: J8, and universal T-helper epitope P25 containing peptides, were chemically coupled with different anionic amino acid-based polymers. The poly(anionic amino acid)-peptide antigen conjugates were mixed with trimethyl chitosan (TMC) to produce self-adjuvanting nanoparticulate vaccine candidates. TMC from two different sources were used to analyse their effect on immunogenicity. The nanoparticles produced from a peptide modified with 10 residues of polyglutamic acid and fungal TMC (NP5) stimulated production of the highest levels of serum antibodies in outbred mice. These antibodies were opsonic against all clinical GAS isolates tested.

Role of nanostructures in improvising oral medicine

The most preferable mode of drugs administration is via the oral route but physiological barriers such as pH, enzymatic degradation etc. limit the absolute use of this route. Herein lies the importance of nanotechnology having a wide range of applications in the field of nano-medicine, particularly in drug delivery systems. The exclusive properties particularly small size and high surface area (which can be modified as required), exhibited by these nanoparticlesrender these structures more suitable for the purpose of drug delivery. Various nanostructures, like liposomes, dendrimers, mesoporous silica nanoparticles, etc. have been designed for the said purpose. These nanostructures have several advantages over traditional administration of medicine. Apart from overcoming the pharmacokinetic and pharmacodynamics limitations of many potential therapeutic molecules, they may also be useful for advanced drug delivery purposes like targeted drug delivery, controlled release, enhanced permeability and retention (EPR) effect. In this review, we attempt to describe an up-to-date knowledge on various strategically devised nanostructures to overcome the problems related to oral drug administration.

Induction of Plasmodium-Specific Immune Responses Using Liposome-Based Vaccines

In the development of vaccines, the ability to initiate both innate and subsequent adaptive immune responses need to be considered. Live attenuated vaccines achieve this naturally, while inactivated and sub-unit vaccines generally require additional help provided through delivery systems and/or adjuvants. Liposomes present an attractive adjuvant/delivery system for antigens. Here, we review the key aspects of immunity against Plasmodium parasites, liposome design considerations and their current application in the development of a malaria vaccine.

Polyglutamic acid-trimethyl chitosan-based intranasal peptide nano-vaccine induces potent immune responses against group A streptococcus

Peptide-based vaccines have the potential to overcome the limitations of classical vaccines; however, their use is hampered by a lack of carriers and adjuvants suitable for human use. In this study, an efficient self-adjuvanting peptide vaccine delivery system was developed based on the ionic interactions between cationic trimethyl chitosan (TMC) and a peptide antigen coupled with synthetically defined anionic α-poly-(l-glutamic acid) (PGA). The antigen, possessing a conserved B-cell epitope derived from the group A streptococcus (GAS) pathogen and a universal T-helper epitope, was conjugated to PGA using cycloaddition reaction. The produced anionic conjugate formed nanoparticles (NP-1) through interaction with cationic TMC. These NP-1 induced higher systemic and mucosal antibody titers compared to antigen adjuvanted with standard mucosal adjuvant cholera toxin B subunit or antigen mixed with TMC. The produced serum antibodies were also opsonic against clinically isolated GAS strains. Further, a reduction in bacterial burden was observed in nasal secretions, pharyngeal surface and nasopharyngeal-associated lymphoid tissue of mice immunized with NP-1 in GAS challenge studies. Thus, conjugation of defined-length anionic polymer to peptide antigen as a means of formulating ionic interaction-based nanoparticles with cationic polymer is a promising strategy for peptide antigen delivery. STATEMENT OF SIGNIFICANCE: A self-adjuvanting delivery system is required for peptide vaccines to enhance antigen delivery to immune cells and generate systemic and mucosal immunity. Herein, we developed a novel self-adjuvanting nanoparticulate delivery system for peptide antigens by combining polymer-conjugation and complexation strategies. We conjugated peptide antigen with anionic α-poly-(l-glutamic acid) that in turn, formed nanoparticles with cationic trimethyl chitosan by ionic interactions, without using external crosslinker. On intranasal administration to mice, these nanoparticles induced systemic and mucosal immunity, at low dose. Additionally, nanoparticles provided protection to vaccinated mice against group A streptococcus infection. Thus, this concept should be particularly useful in developing nanoparticles for the delivery of peptide antigens.

Properties and applications of nanoparticle/microparticle conveyors with adjuvant characteristics suitable for oral vaccination

Vaccination is one of the most effective approaches in the prevention and control of disease worldwide. Oral vaccination could have wide applications if effective protection cannot be achieved through traditional (eg, parenteral) routes of vaccination. However, oral administration is hampered by the difficulties in transferring vaccines in vivo. This has led to the development of materials such as carriers with potential adjuvant effects. Considering the requirements for selecting adjuvants for oral vaccines as well as the advantages of nanoparticle/microparticle materials as immune effectors and antigen conveyors, synthetic materials could improve the efficiency of oral vaccination. In this review, nanoparticles and microparticles with adjuvant characteristics are described with regard to their potential importance for oral immunization, and some promising and successful modification strategies are summarized.

Intranasal delivery of nanoparticle-based vaccines

Most pathogens gain access to the human body and initiate systemic infections through mucosal sites. A large number of currently marketed licensed vaccines are parenterally administered; they generate strong systemic immunity but not mucosal immunity. Nasal vaccination is an appealing strategy for the induction of mucosal-specific immunity; however, its development is mostly challenged by several factors, such as inefficient antigen uptake, its rapid mucociliary clearance, size-restricted permeation across epithelial barriers and absence of safe human mucosal adjuvants. Therefore, a safer mucosal-adjuvanting strategy or efficient mucosal delivery platform is much warranted. This review summarizes challenges and the rationale for nasal vaccine development with a special focus on the use of nanoparticles based on polymers and lipids for mucosal vaccine delivery.

Encapsulation, protection, and delivery of bioactive proteins and peptides using nanoparticle and microparticle systems: A review

There are many examples of bioactive proteins and peptides that would benefit from oral delivery through functional foods, supplements, or medical foods, including hormones, enzymes, antimicrobials, vaccines, and ACE inhibitors. However, many of these bioactive proteins are highly susceptible to denaturation, aggregation or hydrolysis within commercial products or inside the human gastrointestinal tract (GIT). Moreover, many bioactive proteins have poor absorption characteristics within the GIT. Colloidal systems, which contain nanoparticles or microparticles, can be designed to encapsulate, retain, protect, and deliver bioactive proteins. For instance, a bioactive protein may have to remain encapsulated and stable during storage and passage through the mouth and stomach, but then be released within the small intestine where it can be absorbed. This article reviews the application of food-grade colloidal systems for oral delivery of bioactive proteins, including microemulsions, emulsions, nanoemulsions, solid lipid nanoparticles, multiple emulsions, liposomes, and microgels. It also provides a critical assessment of the characteristics of colloidal particles that impact the effectiveness of protein delivery systems, such as particle composition, size, permeability, interfacial properties, and stability. This information should be useful for the rational design of medical foods, functional foods, and supplements for effective oral delivery of bioactive proteins.

Cell to rodent: toxicological profiling of folate grafted thiomer enveloped nanoliposomes

Polymeric nanomaterials, hybridized with lipid components, e.g. phosphocholine or fatty acids, are currently being explored for efficient nano-platforms for hydrophobic drugs. However, their toxicology and toxicokinetics need to be established before enabling their clinical potential. The aim of this study was to investigate the toxicological profile of thiomer enveloped hybrid nanoliposomes (ENLs) and bare nanoliposomes (NLs), loaded with docetaxel (DTX) hydrophobic drug, biocompatible nano-carriers for therapeutic cargo. The in vitro toxicity of hybrid ENLs and NLs was evaluated towards the HCT-116 colon cancer cell line. Biocompatibility was explored against macrophages and acute oral toxicity was examined in mice for 14 days. The anticancer IC50 for ENLs was 0.148 μg ml-1 compared with 2.38 μg ml-1 for pure docetaxel (DTX). The human macrophage viability remained above 65% and demonstrated a high level of biocompatibility and safety of ENLs. In vivo acute oral toxicity showed slight changes in serum biochemistry and haematology but no significant toxicities were observed referring to the safety of DTX loaded hybrid ENLs. On histological examination, no lesions were determined on the liver, heart and kidney. These studies showed that hybrid ENLs can serve as a safe and biocompatible platform for oral delivery of hydrophobic drugs.

Bivalent mucosal peptide vaccines administered using the LCP carrier system stimulate protective immune responses against Streptococcus pyogenes infection

Despite the broad knowledge about the pathogenicity of Streptococcus pyogenes there is still a controversy about the correlate of protection in GAS infections. We aimed in further improving the immune responses stimulated against GAS comparing different vaccine formulations including bis-(3',5')-cyclic dimeric adenosine monophosphate (c-di-AMP) and BPPCysMPEG, a derivative of the macrophage-activating lipopeptide (MALP-2), as adjuvants, respectively, to be administered with and without the universal T helper cell epitope P25 along with the optimized B cell epitope J14 of the M protein and B and T cell epitopes of SfbI. Lipopeptide based nano carrier systems (LCP) were used for efficient antigen delivery across the mucosal barrier. The stimulated immune responses were efficient in protecting mice against a respiratory challenge with a lethal dose of a heterologous S. pyogenes strain. Moreover, combination of the LCP based peptide vaccine with c-di-AMP allowed reduction of antigen dose at the same time maintaining vaccine efficacy.

Potential applications and human biosafety of nanomaterials used in nanomedicine

With the rapid development of nanotechnology, potential applications of nanomaterials in medicine have been widely researched in recent years. Nanomaterials themselves can be used as image agents or therapeutic drugs, and for drug and gene delivery, biological devices, nanoelectronic biosensors or molecular nanotechnology. As the composition, morphology, chemical properties, implant sites as well as potential applications become more and more complex, human biosafety of nanomaterials for clinical use has become a major concern. If nanoparticles accumulate in the human body or interact with the body molecules or chemical components, health risks may also occur. Accordingly, the unique chemical and physical properties, potential applications in medical fields, as well as human biosafety in clinical trials are reviewed in this study. Finally, this article tries to give some suggestions for future work in nanomedicine research. Copyright © 2017 John Wiley & Sons, Ltd.