Mixed lipid phase SMEDDS as an innovative approach to enhance resveratrol solubility

Review on anti-tumour lipid nano drug delivery systems of traditional Chinese medicine

In recent years, the use of traditional Chinese medicine (TCM) in the treatment of cancer has received widespread attention. Treatment of tumours using TCM can effectively reduce the side effects of anti-tumour drugs, meanwhile to improve the treatment efficacy of patients. However, most of the active ingredients in TCM, such as saponins, alkaloids, flavonoids, volatile oils, etc., have defects such as low bioavailability and poor solubility in clinical application, which seriously restrict the application of TCM. Meanwhile, the encapsulation of TCM into lipid nano-delivery systems for cancer therapy has received much attention. Lipid nano-delivery systems are obtained by using phospholipids as the base material and adding other auxiliary materials under a certain preparation process, including, for example, liposomes, solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs), microemulsions, and self-microemulsion drug delivery systems (SMEDDS), can resolve the application problems of TCM by improving the efficacy of active ingredients of TCM and reducing the toxicity of anti-tumour drugs. This paper focuses on the categories, development status, and research progress of lipid nano delivery system of TCM, aiming to provide a certain theoretical basis for further in-depth research and rational application of these systems.

Ibuprofen-Loaded, Nanocellulose-Based Buccal Films: The Development and Evaluation of Promising Drug Delivery Systems for Special Populations

The objective of this work was to investigate the use of nanocrystalline cellulose (NCC) as a drug-delivery excipient for buccal films. Gel-like dispersions were created by blending either gel or powder NCC (gNCC or pNCC) with natural polymers (alginate, pectin, or chitosan) in water, with glycerol serving as a plasticiser. Ibuprofen (IBU) as an active pharmaceutical ingredient (API) was dissolved in a self-microemulsifying drug delivery system (SMEDDS) to improve its solubility prior to its addition to gel-like dispersions. Dispersions were dried, and resulting films were cut to 3 cm × 1.5 cm size, appropriate for buccal delivery. Rheological measurements revealed that shorter, thinner, and less crystalline nanocellulose fibres are more favourable for stronger gel properties. While overall, weaker gel structure prior to film casting also resulted in shorter disintegration time, this was not the case for NCC-chitosan films; here, the low solubility of chitosan in neutral media proved to be the main obstacle. Nevertheless, the prolonged disintegration of NCC-chitosan films did not impact the dissolution of IBU, as these films exhibited the fastest dissolution rate, followed by NCC-pectin and NCC-alginate. Furthermore, NCC properties significantly influenced the dissolution behaviour of the chitosan formulations, with gNCC favouring faster IBU release due to weaker gel formation prior to film casting.

Progress in the Treatment of Central Nervous System Diseases Based on Nanosized Traditional Chinese Medicine

Traditional Chinese Medicine (TCM) is widely used in clinical practice to treat diseases related to central nervous system (CNS) damage. However, the blood-brain barrier (BBB) constitutes a significant impediment to the effective delivery of TCM, thus substantially diminishing its efficacy. Advances in nanotechnology and its applications in TCM (also known as nano-TCM) can deliver active ingredients or components of TCM across the BBB to the targeted brain region. This review provides an overview of the physiological and pathological mechanisms of the BBB and systematically classifies the common TCM used to treat CNS diseases and types of nanocarriers that effectively deliver TCM to the brain. Additionally, drug delivery strategies for nano-TCMs that utilize in vivo physiological properties or in vitro devices to bypass or cross the BBB are discussed. This review further focuses on the application of nano-TCMs in the treatment of various CNS diseases. Finally, this article anticipates a design strategy for nano-TCMs with higher delivery efficiency and probes their application potential in treating a wider range of CNS diseases.

Omega-3 fatty acid-based self-microemulsifying drug delivery system (SMEDDS) of pioglitazone: Optimization, in vitro and in vivo studies

Pioglitazone (PGL) is an effective insulin sensitizer, however, side effects such as accumulation of subcutaneous fat, edema, and weight gain as well as poor oral bioavailability limit its therapeutic potential for oral delivery. Recent studies have shown that combination of both, PGL and fish oil significantly reduce fasting plasma glucose, improve insulin resistance, and mitigate pioglitazone-induced subcutaneous fat accumulation and weight gain. Nevertheless, developing an effective oral drug delivery system for administration of both medications have not been explored yet. Thus, this study aimed to develop a self-micro emulsifying drug delivery system (SMEDDS) for the simultaneous oral administration of PGL and fish oil. SMEDDS was developed using concentrated fish oil,Tween® 80, and Transcutol HP and optimized by central composite design (CCD). The reconstituted, optimized PGL-SMEDDS exhibited a globule size of 142 nm, a PDI of 0.232, and a zeta potential of -20.9 mV. The in-vitro drug release study of the PGL-SMEDDS showed a first-order model kinetic release and demonstrated remarkable 15-fold enhancement compared to PGL suspension. Additionally, following oral administration in fasting albino Wistar rats, PGL-SMEDDS exhibited 3.4-fold and 1.4-fold enhancements in the AUC0-24h compared to PGL suspension and PGL marketed product. The accelerated stability testing showed that the optimized SMEDDS formulation was stable over a three-month storage period. Taken together, our findings demonstrate that the developed fish oil-based SMEDDS for PGL could serve as effective nanoplatforms for the oral delivery of PGL, warranting future studies to explore its synergistic therapeutic potential in rats.

Smart Targeted Delivery Systems for Enhancing Antitumor Therapy of Active Ingredients in Traditional Chinese Medicine

As a therapeutic tool inherited for thousands of years, traditional Chinese medicine (TCM) exhibits superiority in tumor therapy. The antitumor active components of TCM not only have multi-target treatment modes but can also synergistically interfere with tumor growth compared to traditional chemotherapeutics. However, most antitumor active components of TCM have the characteristics of poor solubility, high toxicity, and side effects, which are often limited in clinical application. In recent years, delivering the antitumor active components of TCM by nanosystems has been a promising field. The advantages of nano-delivery systems include improved water solubility, targeting efficiency, enhanced stability in vivo, and controlled release drugs, which can achieve higher drug-delivery efficiency and bioavailability. According to the method of drug loading on nanocarriers, nano-delivery systems can be categorized into two types, including physically encapsulated nanoplatforms and chemically coupled drug-delivery platforms. In this review, two nano-delivery approaches are considered, namely physical encapsulation and chemical coupling, both commonly used to deliver antitumor active components of TCM, and we summarized the advantages and limitations of different types of nano-delivery systems. Meanwhile, the clinical applications and potential toxicity of nano-delivery systems and the future development and challenges of these nano-delivery systems are also discussed, aiming to lay the foundation for the development and practical application of nano-delivery systems of TCM in clinical settings.

Optimization of a Self-microemulsifying Drug Delivery System for Oral Administration of the Lipophilic Drug, Resveratrol: Enhanced Intestinal Permeability in Rat

Purpose

This study aimed to formulate Resveratrol, a practically water-insoluble antioxidant in a self-microemulsifying drug delivery system (SMEDDS) to improve the solubility, release rate, and intestinal permeability of the drug.

Methods

The suitable oil, surfactant, and co-surfactant were chosen according to the drug solubility study. Utilizing the design of experiment (DoE) method, the pseudo-ternary phase diagram was plotted based on the droplet size. In vitro dissolution study and the single-pass intestinal perfusion were performed for the investigation of in vitro and in-situ permeability for drugs formulated as SMEDDS in rat intestine using High-Performance Liquid Chromatography.

Results

Castor oil, Cremophor® RH60, and PEG 1500 were selected as oil, surfactant, and co-surfactant. According to the pseudo-ternary phase diagram, nine formulations developed microemulsions with sizes ranging between 145-967 nm. Formulations passed the centrifuge and freeze-thaw stability tests. The optimum formulation possessed an almost 2.5-fold higher cumulative percentage of in vitro released resveratrol, in comparison to resveratrol aqueous suspension within 120 minutes. The results of the in-situ permeability study suggested a 2.6-fold higher intestinal permeability for optimum formulation than that of the resveratrol suspension.

Conclusion

SMEDDS can be considered suitable for the oral delivery of resveratrol according to the observed increased intestinal permeability, which could consequently enhance the bioavailability and therapeutic efficacy of the drug.

High-Shear Wet Granulation of SMEDDS Based on Mesoporous Carriers for Improved Carvedilol Solubility

Mesoporous carriers are a convenient choice for the solidification of self-microemulsifying drug delivery systems (SMEDDS) designed to improve the solubility of poorly water-soluble drugs. They are known for high liquid load capacity and the ability to maintain characteristics of dry, free-flowing powders. Therefore, five different mesoporous carriers were used for the preparation of carvedilol-loaded SMEDDS granules by wet granulation methods—in paten (manually) and using a high-shear (HS) granulator. Granules with the highest SMEDDS content (63% and 66% of total granules mass, respectively) and suitable flow properties were obtained by Syloid^® 244FP and Neusilin^® US2. SMEDDS loaded granules produced by HS granulation showed superior flow characteristics compared to those obtained manually. All SMEDDS granules exhibited fast in vitro release, with 93% of carvedilol releasing from Syloid^® 244FP-based granules in 5 min. Upon compaction into self-microemulsifying tablets, suitable tablet hardness and very fast disintegration time were achieved, thus producing orodispersible tablets. The compaction slightly slowed down the carvedilol release rate; nevertheless, upon 1 h (at pH 1.2) or 4 h (at pH 6.8) of in vitro dissolution testing, the amount of released drug was comparable with granules, confirming the suitability of orodispersible tablets for the production of the SMEDDS loaded single unit oral dosage form.

Preparation and pharmacological effects of minor ginsenoside nanoparticles: a review

Ginseng (Panax ginseng) is a perennial herbaceous plant belonging to Panax genus of Araliaceae. Ginsenosides are a kind of important compounds in ginseng and minor ginsenosides are secondary metabolic derivatives of ginsenosides. Studies have shown that minor ginsenosides have many pharmacological effects, such as antioxidant, anti-tumor, anti-platelet aggregation, and neuroprotective effects. However, the therapeutic effects of minor ginsenosides are limited due to poor solubility in water, short half-life, and poor targeting accuracy. In recent years, to improve the application efficiency, the research on the nanocrystallization of minor ginsenosides have attracted extensive attention from researchers. This review focuses on the classification, preparation methods, pharmacological effects, and action mechanisms of minor ginsenoside nanoparticles, as well as existing problems and future direction of relevant research, which provides a reference for the in-depth research of minor ginsenoside nanoparticles.

Self-Emulsifying Systems for Delivery of Bioactive Compounds from Natural Origin

Nature has been used as therapeutic resources in the treatment of diseases for many years. However, some natural compounds have poor water solubility. Therefore, physicochemical strategies and technologies are necessary for development of systems for carrying these substances. The self-emulsifying drug delivery systems (SEDDS) have been used as carriers of hydrophobic compounds in order to increase the solubility and absorption, improving their bioavailability. SEDDS are constituted with a mixture of oils and surfactants which, when come into contact with an aqueous medium under mild agitation, can form emulsions. In the last years, a wide variety of self-emulsifying formulations containing bioactive compounds from natural origin has been developed. This review provides a comprehensive overview of the main excipients and natural bioactive compounds composing SEDDS. In addition, applications, new technologies and innovation are reviewed as well. Examples of self-emulsifying formulations administered in different sites are also considered for a better understanding of the use of this strategy to modify the delivery of compounds from natural origin.

Development of self-microemulsifying lipid-based formulations of trans-resveratrol by systematically constructing lipid-surfactant-water phase diagrams using long-chain lipids

The aim of this work was to develop self-microemulsifying lipid-based formulations of trans-resveratrol in cod liver oil, a long chain lipid, to increase its solubility, dissolution rate and oral bioavailability. Ternary phase diagrams of cod liver oil with surfactant and water as well as pseudo-ternary phase diagrams of the same by mixing cod liver oil (triglyceride) with glycerol monooleate (monoglyeride) were constructed to identify regions where microemulsions were formed. Kolliphor RH 40, Tween 80 and their 1:1-mixtures were evaluated as surfactants. No organic cosolvents were added. It was observed that cod liver oil alone did not form microemulsion with any of the surfactants used, and a 1:1 mixture of cod liver oil and glycerol monooleate was necessary to enable the formation of microemulsion. Among the surfactants, Kolliphor RH 40 provided the maximum microemulsification effect. Several formulations containing 6:4, 1:1, and 4:6 w/w ratios of lipid to surfactant using the 1:1 mixture of cod liver oil and glycerol monooleate as lipid components and Kolliphor RH 40 or its mixture with Tween 80 as surfactants were identified, and trans-resveratrol solubility in these formulations were determined. Drug concentrations used in the formulations were 80% of saturation solubility, and no organic cosolvents were used in any formulations to increase drug solubility or enable emulsification. In vitro dispersion testing in 250 mL of 0.01 N HCl (pH 2) according to the USP method 2 at 50 RPM showed that the formulations rapidly dispersed in aqueous media forming microemulsions and there was no drug precipitation.

Current Advances of Nanocarrier Technology-Based Active Cosmetic Ingredients for Beauty Applications

Nanocarrier technology has been effectively applied to the development of drug delivery systems to overcome the limitations of traditional preparation. Its application has been extended to various pharmaceutical fields from injection preparation to oral preparation and external preparation, and now it has appeared in the field of cosmetics for beauty applications. The widespread influence of nanocarrier in the cosmetics industry is due to the fact that nanocarrier can effectively promote the percutaneous penetration and significantly increase skin retention of active components in functional cosmetics. Meanwhile, nanocarrier can effectively improve the water dispersion of insoluble active cosmetic ingredients, enhance the stability of efficacy components and achieve the codelivery of diverse cosmetics active ingredients. In this review, we summarized the current progress of nanocarrier technology in the functional cosmetics, including the types and the routes of dermal/transdermal drug delivery nanocarriers used in the functional cosmetics, the mechanism of nanocarriers promoting the percutaneous penetration of active cosmetic ingredients, the application and efficacy evaluation of different active cosmetic ingredients in nanocarriers and discussing the potential risks to human. This will provide a useful reference for the further development of nanocarriers in the field of functional cosmetics.

Supersaturable self-microemulsifying drug delivery system enhances dissolution and bioavailability of telmisartan

To enhance the dissolution and oral bioavailability of telmisartan (TMS), a poorly water-soluble anti-hypertensive drug, a supersaturable self-microemulsifying drug delivery system (SuSMEDDS) was developed. Amorphous alkalinized TMS (AAT) was formulated into a SMEDDS, composed of Capmul® MCM (oil), Cremophor^® RH40 (surfactant), and tetraglycol (co-surfactant). Although the SMEDDS was rapidly dissolved (>80% within 5 min) in a limited condition (500 mL, pH 6.8), drug precipitation was observed over time, resulting in a decrease in dissolution levels. The precipitation was due to drug recrystallization, as determined by differential scanning calorimetry and powder X-ray diffraction analyses. Several polymers, including Soluplus^® (SOL), were screened as precipitation inhibitors; ultimately, SuSMEDDS-SOL was prepared by admixing SOL and the SMEDDS at a 5:100 (w/w) ratio. SuSMEDDS-SOL was superior in terms of dissolution efficiency (>90% over 2 h) and dissolution-retaining time (no precipitation over 2 h). An in vivo pharmacokinetic study in rats revealed that the oral bioavailability of SuSMEDDS-SOL was 4.8-, 1.3-, and 1.2-fold greater than those of the TMS suspension, AAT solution, and SMEDDS, respectively. Therefore, SuSMEDDS-SOL is a promising candidate to enhance the dissolution and oral bioavailability of TMS.

Electrospun Resveratrol-Loaded Polyvinylpyrrolidone/Cyclodextrin Nanofibers and Their Biomedical Applications

Resveratrol is a naturally occurring polyphenol compound which has been shown to possess antioxidant and anti-inflammatory properties. However, its pharmaceutical applications are limited by its poor water solubility. In this study, we used electrospinning technology to synthesize nanofibers of polyvinylpyrrolidone (PVP) and hydroxypropyl-β-cyclodextrin (HPBCD) loaded with resveratrol. We used X-ray diffractometry to analyze crystalline structure, Fourier transform infrared spectroscopy to determine intermolecular hydrogen bonding, antioxidant assays to measure antioxidant activity, and Franz diffusion cells to evaluate skin penetration. Our results showed that the aqueous solubility of resveratrol nanofibers was greatly improved (by more than 20,000-fold) compared to the pure compound. Analysis of physicochemical properties demonstrated that following nanofiber formation, resveratrol was converted from a crystalline to amorphous structure, and resveratrol formed new intermolecular bonds with PVP and HPBCD. Moreover, resveratrol nanofibers showed good antioxidant activity. In addition, the skin penetration ability of resveratrol in the nanofiber formulation was greater than that of pure resveratrol. Furthermore, resveratrol nanofibers suppressed particulate matter (PM)-induced expression of inflammatory proteins (COX-2 and MMP-9) in HaCaT keratinocytes. Therefore, resveratrol-loaded nanofibers can effectively improve the solubility and physicochemical properties of resveratrol, and may have potential applications as an antioxidant and anti-inflammatory formulation for topical skin application.

An overview of techniques for multifold enhancement in solubility of poorly soluble drugs

Poor water solubility of newly discovered compounds has become the most common challenge in the drug development process. Indeed, poor solubility is considered as the root cause of failure of drug during drug development phases. Moreover, it has also been reported to be the main reason for bioavailability issues such as poor, inconsistent, incomplete and highly variable bioavailability of the marketed products. As per an estimate, approximately 90% of drug molecules suffer with poor water solubility at early stage and approximately 40% of the marketed drugs have bioavailability problems mainly due to poor water solubility. Solubility enhancement of the newly discovered compounds is primary research area for the pharmaceutical industries and research institutions. The conventional techniques to improve aqueous solubility of drugs employ salt formation, prodrug formation, co-crystallization, complexation, amorphous solid dispersion and use of co-solvent, surfactants or hydrotropic agents. Current advancement in the science and technology has enabled the use of relatively new techniques under the umbrella of nanotechnology. These include the development of nanocrystals, nanosuspensions, nanoemulsions, microemulsions, liposomes and nanoparticles to enhance the solubility. This review focuses on the conventional and current approaches of multifold enhancement in the solubility of poorly soluble marketed drugs, including newly discovered compounds.

Development of solid self-emulsifying drug delivery systems (SEDDS) to improve the solubility of resveratrol

Aim: A solid self-emulsifying drug delivery systems was developed by using the spray-drying technique, to improve the solubility of resveratrol (RES). Materials & methods: Cod liver oil and three surfactant system were tested: soy phosphatidylcholine (SPC)/Eumulgin® HRE-40 (EU)/Sodium oleate (system A); SPC/Tween®80 (TW) /Sodium oleate (system B) and SPC/EU/TW (system C). Results: The greatest incorporation was obtained with system C (21.26 mg/ml). Solid self-emulsifying drug delivery systems with the highest yield were obtained with colloidal silicon dioxide (CSD) (80.12%), and CSD sodium croscarmelose 9:1 and 5:5. RES dissolution attained 100% at 45 min with CSD:CS 5:5. Discussion: The surface modification to hydrophilic by CSD:sodium croscarmellose reduced the cohesive force among drug particles. Conclusion: The developed systems are a good approximation for the design of strategies that could allow increasing the oral bioavailability of RES.

Multicomponent self nano emulsifying delivery systems of resveratrol with enhanced pharmacokinetics profile

Resveratrol is a drug with high potential for clinical application based on experimental models. Though, resveratrol translation to clinical use has not been successful yet due to its poor pharmacokinetics, related to poor solubility and fast metabolism. The use of drug delivery systems, namely self-emulsifying drug delivery systems (SEDDS), may be a viable strategy to overcome the poor in vivo performance of resveratrol. In this work, a rational development of two different ternary SEDDS was conducted. Experimental data showed that quantitative variations on SEDDS composition impacted dispersion and robustness to dilution of SEDDS, as well as loading capacity and droplet size. Formulations composed of Lauroglycol® 90/Labrasol®/Capryol® PGMC (12.5/75.0/12.5) (Lau/Lab/Cap) and Tween® 80/Transcutol®/Imwitor® 742 (33.3/33.3/33.3) (T80/Trans/Imw) featured improved performance and were selected for further studies. T80/Trans/Imw formulation yield faster emulsification and originated smaller droplet size, with lower cumulative percentile of 90% of particles (D₉₀) (below 200 nm), as compared to the than Lau/Lab/Cap formulation. Higher resveratrol permeation rate was observed in Caco-2 cell monolayer permeability studies for both formulations as compared to the free drug. Reduction of the metabolization and/or efflux of resveratrol was also noticed in the case of SEDDs, as suggested by the increased recovery of total drug. Plasmatic drug concentrations in rats observed after oral gavage indicate that both formulations provided faster resveratrol absorption than free drug, resulting in shorter T_max values (30 min vs. 2 h). No statistically significant differences were observed for AUC_0-t values of both formulations and the free drug. Still, C_max for the Lau/Lab/Cap SEDDs formulation was 2-fold higher than for the free drug. These findings suggest that SEDDS can increase resveratrol solubility and reduce its metabolization, resulting in an overall improvement of its oral pharmacokinetics profile.

Self-microemulsifying Drug Delivery System for Problematic Molecules: An Update

BACKGROUND

The poor bioavailability of a problematic molecule is predominantly due to its high lipophilicity, low solubility in gastric fluids and/or high fist pass metabolism. Self microemulsifying drug delivery system (SMEDDS), a lipidic type IV nano-formulation has been of interest in the field of pharmaceutical research due to its potential for tailoring the physicochemical properties of pharmaceutical molecules.

METHODS

This review provides insights on various recent innovations and reports from the past seven years (2012-2019) of self-emulsifying formulations for the delivery of various types of poorly soluble drugs, phytoconstituents and high molecular peptides and gives exhaustive details of the outcome of the endeavors in this field.

RESULTS

Various types of innovative formulations have been molded from SMEDDS like selfemulsifying powders, granules, tablets, pellets, eutectic and cationic formulations. Till date, many research reports and patents have been filed on self-emulsifying dosage forms and many formulations have gained US-FDA approvals which are summarized in the review article.

CONCLUSION

This review content highlighted the increasing scope of SMEDDS in augmenting the physiochemical properties of an API, the variegated formulation types and the attributes of API that can be improved by SMEDD based formulations.

Self-microemulsifying tablets prepared by direct compression for improved resveratrol delivery

The purpose of this study was to develop self-microemulsifying (SME-) tablets to improve resveratrol solubility whilst delivering resveratrol in a preferred tablet dosage form. Resveratrol was dissolved in liquid self-microemulsifying drug delivery system (SMEDDS) (10% w/w) and solidified through adsorption on several different solid carriers. Two ranges of synthetic amorphous silica (Sylysia® 290, 350, 470, 580; Syloid® 244FP, AL-1FP) as well as granulated magnesium aluminometasilicate (Neusilin® US2) were screened for their SMEDDS adsorbent capacity. The most efficient carrier from every range was chosen for further SME-tablet development. To counteract the high ratio of liquid in SME-tablets, additional dry binders (microcrystalline cellulose, copovidone) were added to the tableting mixture, as well as superdisintegrant (croscarmellose sodium) and lubricant (magnesium stearate). Finally, approx. 600 mg tablets were directly pressed using 12 mm flat face punch, containing 41.75% SMEDDS. Overall, all tablets exhibited sufficient hardness (>50 N), although it was negatively affected by higher compression force. Tablets with Neusilin® US2 proved to have highest hardness, as granulated structure of Neusilin® US2 provided best compaction properties needed for successful direct compression of tablets. All prepared SME tablet formulations disintegrated in under 10 min and formed microemulsions (droplet size < 100 nm) upon dilution with water, with Neusilin® US2 tablets exhibiting the lowest droplet size (<30 nm). While conventional dissolution test indicated incomplete resveratrol release from solid carriers in both pH 1.2 and 6.8 media, no difference fatty acid amount titrated during fasted state in vitro lipolysis between liquid and solid SMEDDS was observed. Moreover, accelerated stability tests confirmed over 90% of trans-resveratrol remained in solid SMEDDS following 90 days at 40 °C, with no crystallization of resveratrol observed during that time. To sum up, through adsorption on solid carriers, in particular Neusilin® US2, SMEDDS was successfully transformed into a directly compressible mixture and tableted without the loss of its self-microemulsifying ability.

Biopharmaceutical insights of particulate emulsified systems - a prospective overview

During the twenty-first century, drug discovery is expanding rapidly and a large number of chemical moieties are recognized. Many of them are poorly soluble and hence related biopharmaceutical constraints are to be addressed systematically. Among novel approaches to resolving biopharmaceutical issues, micro- and nano-emulsified systems serve as the best strategy for delivering both hydrophobic and hydrophilic drugs owing to their greater solubilization and transportation capabilities. Of late, the unique physical and biopharmaceutical properties of these liquid isotropic homogenous systems have gained substantive research importance. In addition nano/micro lipid systems share structural and functional similarity with that of the physiological lipids which offer better tolerance ability in the body. In this context, this article provides information on the historical emergence of particulate emulsified systems, importance and rationale of selection of carriers. It also encompasses the physicochemical principles that are responsible for the elevation of therapeutic outcomes of delivery systems. Detailed and schematic absorption of these drug delivery systems is explained here. Gastro-intestinal biochemistry necessary in the understanding of digestion process, lipolytic products formed, micellar structures, enzymes, transporters, mechanism of cell uptake involved after subsequent oral absorption are also emphasized. In addition, this article also explains disposition and pharmacokinetic properties of emulsified systems with real-time therapeutic research outcomes. The influence of biochemical compositions and biopharmaceutical principles on absorption and disposition patterns of ME/NEs was described in the article for the interest of readers and young researchers.

Antioxidant activity and photostability assessment of trans-resveratrol acrylate microspheres

Trans-resveratrol (RSV) was microencapsulated in Eudragit^® RS100 and RL100 resin blends. Lyophilized microspheres were characterized in the solid state for their micromeritic properties and drug loading. FT-IR, PXRD, and DSC analyzes suggested that RSV formed an intimate microcrystalline dispersion within the polymer network, also confirmed by SEM analysis. This produced a reduced degradation of RSV after storage at 40 °C, compared to the neat drug, and a protection of the drug from UV light-induced trans-cis isomerization (60% intact drug was found after 60 s irradiation at 350 nm, compared to 37% for the pure drug). Solubility and in vitro dissolution studies indicated that microencapsulation did not improve the dissolution pattern of RSV in simulated gastric and intestinal aqueous fluids. Evaluation of the in vitro antioxidant activity showed that, compared to the neat drug in aqueous solution, RSV loaded in the microspheres retained for a longer time, up to 22 days of incubation, the initial ORAC capacity. The present study thus demonstrated that Eudragit^® Retard resins can be used to easily produce micro-sized solid dispersions with RSV, for potential oral administration, contributing to ameliorate the physico-chemical stability and antioxidant activity of this compound.

Characterization of brusatol self-microemulsifying drug delivery system and its therapeutic effect against dextran sodium sulfate-induced ulcerative colitis in mice

Brusatol (BR) is one of the main bioactive components derived from Brucea javanica, a medicinal herb historically used in the treatment of dysenteric disorders (also known as ulcerative colitis(UC)). Due to its poor aqueous solubility, a novel brusatol self-microemulsifying drug delivery system (BR-SMEDDS) nanoformulation with smaller size, higher negative zeta potential and drug content, and excellent stability was developed. The appearance of BR-SMEDDS remained clear and transparent, and transmission electron microscopy showed microemulsion droplets to be spherical with homogeneous distribution. Pharmacokinetic parameters indicated that oral bioavailability was greatly improved by BR-SMEDDS as compared with aqueous suspension. Meanwhile, the anti-colitis activity of BR-SMEDDS was evaluated on dextran sodium sulfate (DSS)-induced colitis mice model. The result illustrated that the nano-formation significantly reduced the body weight loss, recovered colon length, decreased disease activity index and microscopic score, regulated immune-inflammatory cytokines, diminished oxidative stress and repressed the colonic expression of myeloid differentiation factor 88 (MyD88), toll-like receptor 4 (TLR4) and nuclear factor kappa B p65 (NF-κB p65) proteins. Our findings demonstrated for the first time that BR could effectively attenuate colonic inflammation in mice, at least partially, via favorable regulation of anti-oxidative and anti-inflammatory status and inhibition of the TLR4-linked NF-κB signaling pathway. The BR nano-formulation was superior to BR suspension and sulphasalazine, in treating experimental UC, and exhibited similar effect with azathioprine, with much smaller dosage. The enhanced anti-UC effect of BR might be intimately associated with the improved pharmacokinetic property by SMEDDS. The developed nano-delivery system might thus be a promising candidate for colitis treatment.

Development of self-microemulsifying drug delivery system for oral delivery of poorly water-soluble nutraceuticals

The objective of the study was to develop a self-microemulsifying drug delivery system (SMEDDS), also known as microemulsion preconcentrate, for oral delivery of five poorly water-soluble nutraceuticals or bioactive agents, namely, vitamin A, vitamin K2, coenzyme Q₁₀, quercetin and trans-resveratrol. The SMEDDS contained a 1:1 mixture (w/w) of Capmul MCM NF (a medium chain monoglyceride) and Captex 355 EP/NF (a medium chain triglyceride) as the hydrophobic lipid and Tween 80 (polysorbate 80) as the hydrophilic surfactant. The lipid and surfactant were mixed at 50:50 w/w ratio. All three of the SMEDDS components have GRAS or safe food additive status. The solubility of nutraceuticals was determined in Capmul MCM, Captex 355, Tween 80, and the SMEDDS (microemulsion preconcentrate mixture). The solubility values of vitamin A palmitate, vitamin K2, coenzyme Q₁₀, quercetin, and trans-resveratrol per g of SMEDDS were, respectively, 500, 12, 8, 56, and 87 mg. Appropriate formulations of nutraceuticals were prepared and filled into hard gelatin capsules. They were then subjected to in vitro dispersion testing using 250 mL of 0.01 N HCl in USP dissolution apparatus II. The dispersion test showed that all SMEDDS containing nutraceuticals dispersed spontaneously to form microemulsions after disintegration of capsule shells with globule size in the range of 25 to 200 nm. From all formulations, except that of vitamin K2, >80-90% nutraceuticals dispersed in 5-10 min and there was no precipitation of compounds during the test period of 120 min. Some variation in dispersion of vitamin K2 was observed due to the nature of the material used (vitamin K2 pre-adsorbed onto calcium phosphate). The present report provides a simple and organic cosolvent-free lipid-based SMEDDS for the oral delivery of poorly water-soluble nutraceuticals. Although a 50:50 w/w mixture of lipid to surfactant was used, the lipid content may be increased to 70:30 without compromising the formation of microemulsion.

Synthesis of Quercetin Loaded Nanoparticles Based on Alginate for Pb(II) Adsorption in Aqueous Solution

Pb(II) is a representative heavy metal in industrial wastewater, which may frequently cause serious hazard to living organisms. In this study, comparative studies between alginate nanoparticles (AN) and quercetin-decorated alginate nanoparticles (Q-AN) were investigated for Pb(II) ion adsorption. Characterization of AN and Q-AN were analysed by transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FT-IR), X-ray diffractometer (XRD), and thermogravimetric analysis (TG-DTG-DSC). The main operating conditions such as pH, initial concentration of Pb(II), and co-existing metal ions were also investigated using a batch experiment. AN and Q-AN, with a diameter of 95.06 and 58.23 nm, were constituted by many small primary nanoparticles. It revealed that when initial concentration of Pb(II) is between 250 and 1250 mg L(-1), the adsorption rate and equilibrium adsorption were increased with the increase of pH from 2 to 7. The maximum adsorption capacities of 147.02 and 140.37 mg L(-1) were achieved by AN and Q-AN, respectively, with 0.2 g adsorbents in 1000 mg L(-1) Pb(II) at pH 7. The adsorption rate of Pb(II) was little influenced by the co-existing metal ions, such as Mn(II), Co(II), and Cd(II). Desorption experiments showed that Q-AN possessed a higher desorption rate than AN, which were 90.07 and 83.26 %, respectively. AN and Q-AN would probably be applied as adsorbents to remove Pb(II) and then recover it from wastewater for the advantages of simple preparation, high adsorption capacity, and recyclability.

Improved Antioxidant Capacity of Optimization of a Self-Microemulsifying Drug Delivery System for Resveratrol

The use of nano-encapsulated resveratrol (RSV) in self-micro-emulsified drug delivery systems (SMEDDS) formulations was investigated. Self-emulsifying grading tests were used to establish the optimal ratio of oil, surfactant, and co-surfactant. The optimized system was further investigated for the droplet size and zeta potential at the different medium pH values by a Malvern Zetasizer and transmission electron microscopy (TEM). The antioxidant capacity and cytotoxicity of the formulation were detected by DCFH-DA and a CCK-8 assays. The results showed that the nano-emulsion based on ethyl oleate, Tween-80, and PEG-400 (35:40:25, w/w/w) was the most stable formulation due to the small droplet size (approximately 50 nm) and high zeta potential in a neutral environment. Furthermore, this formulation also exhibited a greater antioxidant capacity with less toxicity than free RSV. Taken together, considering these results and the simple fabrication process, this formulation could be used to deliver nutritional food supplements in a stable, efficient, and safe manner.

The main potentialities of resveratrol for drug delivery systems

Resveratrol (RSV), a natural polyphenol found in grapes, was found to be effective in the prevention and therapy of several diseases, however, it does have unfavourable physicochemical properties. In this context, an increasing number of studies have aimed at developing novel therapeutic systems for its delivery to overcome these disadvantages. This review focuses on the mechanisms of action and therapeutic applications. Finally, it also describes some tested formulations for RSV administration, controlled release and targeting, developed with the purpose of increasing RSV bioavailability.

Nanocarriers for the delivery of active ingredients and fractions extracted from natural products used in traditional Chinese medicine (TCM)

Traditional Chinese medicine (TCM) has been practiced for thousands of years with a recent increase in popularity. Despite promising biological activities of active ingredients and fractions from TCM, their poor solubility, poor stability, short biological half-life, ease of metabolism and rapid elimination hinder their clinical application. Therefore, overcoming these problems to improve the therapeutic efficacy of TCM preparations is a major focus of pharmaceutical sciences. Recently, nanocarriers have drawn increasing attention for their excellent and efficient delivery of active TCM ingredients or fractions. This review discusses problems in the delivery of active TCM ingredients or fractions; focuses on recent advances in nanocarriers that represent potential solutions to these problems, including lipid-based nanoparticles and polymeric, inorganic, and hybrid nanocarriers; and discusses unanswered questions in the field and criteria for the development of better nanocarriers for the delivery of active TCM ingredients or fractions to be focused on in future studies.

Zein-Based Nanoparticles Improve the Oral Bioavailability of Resveratrol and Its Anti-inflammatory Effects in a Mouse Model of Endotoxic Shock

Resveratrol offers pleiotropic health benefits including a reported ability to inhibit lipopolysaccharide (LPS)-induced cytokine production. The aim of this work was to prepare, characterize, and evaluate a resveratrol nanoparticulate formulation based on zein. For this purpose, the oral bioavailability of the encapsulated polyphenol as well as its anti-inflammatory effects in a mouse model of endotoxic shock was studied. The resveratrol-loaded nanoparticles displayed a mean size of 307 ± 3 nm, with a negative zeta potential (-51.1 ± 1.55 mV), and a polyphenol loading of 80.2 ± 3.26 μg/mg. In vitro, the release of resveratrol from the nanoparticles was found to be pH independent and adjusted well to the Peppas-Sahlin kinetic model, suggesting a mechanism based on the combination of diffusion and erosion of the nanoparticle matrix. Pharmacokinetic studies demonstrated that zein-based nanoparticles provided high and prolonged plasma levels of the polyphenol for at least 48 h. The oral bioavailability of resveratrol when administered in these nanoparticles increased up to 50% (19.2-fold higher than for the control solution of the polyphenol). Furthermore, nanoparticles administered daily for 7 days at 15 mg/kg were able to diminish the endotoxic symptoms induced in mice by the intraperitoneal administration of LPS (i.e., hypothermia, piloerection, and stillness). In addition, serum tumor necrosis factor-alpha (TNF-α) levels were slightly lower (approximately 15%) than those observed in the control.

Stability and solubility of trans-resveratrol are strongly influenced by pH and temperature

Recently trans-resveratrol (trans-RSV) has received great attention due to its prophylactic and therapeutic properties. Its limited bioavailability provides compelling evidence of the need for more suitable formulations in order to attain better clinical effectiveness. Some physicochemical properties of trans-RSV are still unknown or research findings are contradictory. Therefore, this paper presents newly determined trans-RSV solubility and stability at various pH and temperatures, and the importance of such data for the studies of novel trans-RSV-loaded nanofibers. In acidic pH trans-RSV was stable, whereas its degradation started to increase exponentially above pH 6.8. Consequently, it is worthwhile to note that special consideration has to be dedicated to long dissolution testing or biological assays on cell lines in order to obtain relevant data. Measurements were done by validated UV/VIS spectroscopy, HPLC, and newly developed UPLC methods. Specificity was confirmed for HPLC and UPLC method, whereas UV/VIS spectroscopy resulted in false higher trans-RSV concentrations in conditions under which it was not stable (alkaline pH, light, increased temperature). The study is of interest because it draws attention to the importance of careful selected experimental conditions, their influence on the trans-RSV stability and the implications this has for formulation development, storage, and maintenance of therapeutic doses.

Recent advances of resveratrol in nanostructured based delivery systems and in the management of HIV/AIDS

Resveratrol, a natural polyphenolic compound present in trees, in peanuts, in grapevines and exhibited multiple pharmacological activities. Extensive research in last two decades suggested that resveratrol possesses anti-inflammatory, anti-cancer, anti-viral, anti-amyloid, anti-arthritic and antioxidant properties. Some clinical reports have proposed that resveratrol might be a potential candidate for the prevention and/or treatment of HIV/AIDS and synergistically enhances the anti-HIV-1 activity. Resveratrol is not toxic to cells, and by itself reduces viral replication by 20% to 30%. With almost 12% of the world population suffering from HIV/AIDS including its resurgence in the developed world, better management of this global threat is highly desired. Further, various studies demonstrated several issues associated with resveratrol which account for its poor systemic bioavailability (almost zero) due to rapid and extensive first pass metabolism and existence of enterohepatic recirculation. In order to improve bioavailability and cellular uptake of resveratrol, various strategies have been adopted to date which includes resveratrol prodrug and the development of nanostructured delivery systems. Besides, nanostructured delivery systems are also known to inhibit the P-glycoprotein (P-gp) efflux, reduced metabolism by gut cytochrome P-450 enzymes, and circumnavigate the hepatic first-pass effect, facilitating absorption of drugs via intestinal lymphatic pathways. This review paper provides an updated bird's-eye view account on the publications and patents study on the recent novel approaches to deliver resveratrol in order to enhance oral bioavailability, overcome first pass metabolism and trounce enterohepatic recirculation to make resveratrol a therapeutically potent drug. Providing a relatively pithy overview, this paper thus presents recent advances of resveratrol for the treatment and prevention of HIV/AIDS.

A self-microemulsifying drug delivery system to overcome intestinal resveratrol toxicity and presystemic metabolism

A mixed lipid-mixed surfactant self-microemulsifying drug delivery system (SMEDDS) was developed to exploit the health benefits of resveratrol, a Biopharmaceutical Classification System Class 2 natural polyphenol, subject to extensive intestinal presystemic metabolism. SMEDDS with a mixed lipid phase (castor oil/Capmul MCM 1:1) and a mixed surfactant phase (Kolliphor EL/Kolliphor RH 40 1:1) was developed and evaluated for its self-emulsifying properties and in vitro dispersion. The impact of SMEDDS on the permeability properties of resveratrol and its metabolite fluxes through the rat intestine and Caco-2 cells was monitored. The inhibitory effect of selected SMEDDS components on the efflux transporters multidrug resistance-associated protein and P-gp as well as cytotoxicity was assessed on Caco-2 cells. The formulation allowed for high resveratrol loading (122.5 mg/g SMEDDS), excellent self-emulsifying properties, and very rapid release. When formulated in SMEDDS, resveratrol metabolite efflux significantly declined. The formulation (SMEDDS without incorporated resveratrol) and its individual components did not compromise in vitro cell vitality and integrity. Mixed lipid-mixed surfactant SMEDDS is a prospective formulation to improve resveratrol biopharmaceutical, pharmacokinetic, and toxicological properties, leading the way to resveratrol use not only as a supplement but also as a pharmacological drug.

Overcoming the cutaneous barrier with microemulsions

Microemulsions are fluid and isotropic formulations that have been widely studied as delivery systems for a variety of routes, including the skin. In spite of what the name suggests, microemulsions are nanocarriers, and their use as topical delivery systems derives from their multiple advantages compared to other dermatological formulations, such as ease of preparation, thermodynamic stability and penetration-enhancing properties. Composition, charge and internal structure have been reported as determinant factors for the modulation of drug release and cutaneous and transdermal transport. This manuscript aims at reviewing how these and other characteristics affect delivery and make microemulsions appealing for topical and transdermal administration, as well as how they can be modulated during the formulation design to improve the potential and efficacy of the final system.