Seaweed Bioethanol Production: A Process Selection Review on Hydrolysis and Fermentation

Exploring Seaweed-Associated Marine Microbes: Growth Impacts and Enzymatic Potential for Sustainable Resource Utilization

Seaweed, a valuable marine resource widely cultivated worldwide, can be vulnerable to stress and microbiome alterations, resulting in the decay of seaweeds and substantial economic losses. To investigate the seaweed-microbiome interaction, our study aimed to isolate marine bacteria and fungi that can cause Ice-Ice disease and evaluate their enzymatic characteristics for potential application in bioethanol production from seaweed biomass. Three red seaweed species (Gracilaria edulis, Kappaphycus alvarezii, and Eucheuma cottonii) were obtained for our study and placed in separate culture tanks. Among the 18 isolated marine microbial species, 12 tested positive for agar and carrageenan activity: six exhibited both activities, three displayed only agar activity, and three only carrageenan activity. DNA sequencing of the positive microbes identified ten bacteria and two yeast species. The 3,5-Dinitrosalicylic acid (DNSA) assay results revealed that the identified bacterial Caldibacillus kokeshiiformis strain FJAT-47861 exhibited the highest carrageenase activity (0.76 units/ml), while the yeast Pichia fermentans strain PM79 demonstrated the highest agarase activity (0.52 units/ml). Notably, Pichia fermentans strain PM79 exhibited the highest overall agarase and carrageenase activity, averaging 0.63 units/ml. The average carrageenase activity of all six positive microbes was 1.5 times higher than their agarase activity. These findings suggest that the 12 isolated microbes hold potential for bioethanol production from macroalgae, as their agarase and carrageenase activity indicates their ability to break down seaweed cell wall carbohydrates, causing ice-ice disease. Moreover, these results provide exciting prospects for harnessing the bioconversion capabilities of these microbes, paving the way for sustainable and efficient bioethanol production from seaweed resources.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-024-01205-w.

Sequential and enzyme-assisted extraction of algal bioproducts from Ecklonia maxima

Brown algae are gaining recognition as sources of bio-compounds with diverse properties and potential applications in the food, nutraceutical, and pharmaceutical industries. Compounds such as polyphenols, alginates and fucoidan possess multiple bioactivities, including antidiabetic, antioxidant, anticancer, anti-inflammatory, and antibacterial properties. Conventional extraction methods provide low yields, posing challenges for the industrial applications of biocompounds. However, innovations are rapidly emerging to address these challenges, and one such approach is enzyme-assisted extraction. Furthermore, extracting single compounds undervalues algal biomass as valuable compounds may remain in the waste. Therefore, the aim of our study was to develop a framework for the sequential and enzyme-assisted extraction of various bio-compounds using the same biomass in a biorefinery process. The Ecklonia maxima algal biomass was defatted, and polyphenols were extracted using solid-liquid extraction with aqueous ethanol. The remaining residue was treated with an enzyme combination (Cellic® Ctec 2 and Viscozyme L) to liberate carbohydrates into solution, where an alginate and fucoidan fraction were isolated. A second alginate fraction was harvested from the residue. The phenolic fraction yielded about 11% (dry weight of extract/dry weight of seaweed biomass), the alginate fraction 35% and the fucoidan fraction 18%. These were analysed using a variety of biochemical methods. Structural analyses, including FTIR, NMR and TGA, were performed to confirm the integrity of these compounds. This study demonstrated that a sequential extraction method for various algal bioproducts is possible, which can pave the way for a biorefinery approach. Furthermore, our study primarily employed environmentally and eco-friendly extraction technologies promoting an environmentally sustainable industrial approach. This approach enhances the feasibility and flexibility of biorefinery operations, contributing to the development of a circular bio-economy.

Catalytic hydrolysis of agar using magnetic nanoparticles: optimization and characterization

BACKGROUND

Agar is used as a gelling agent that possesses a variety of biological properties; it consists of the polysaccharides agarose and porphyrin. In addition, the monomeric sugars generated after agar hydrolysis can be functionalized for use in biorefineries and biofuel production. The main objective of this study was to develop a sustainable agar hydrolysis process for bioethanol production using nanotechnology. Peroxidase-mimicking Fe3O4-MNPs were applied for agar degradation to generate agar hydrolysate-soluble fractions amenable to Saccharomyces cerevisiae and Escherichia coli during fermentation.

RESULTS

Fe3O4-MNP-treated (Fe3O4-MNPs, 1 g/L) agar exhibited 0.903 g/L of reducing sugar, which was 21-fold higher than that of the control (without Fe3O4-MNP-treated). Approximately 0.0181% and 0.0042% of ethanol from 1% of agar was achieved using Saccharomyces cerevisiae and Escherichia coli, respectively, after process optimization. Furthermore, different analytical techniques (FTIR, SEM, TEM, EDS, XRD, and TGA) were applied to validate the efficiency of Fe3O4-MNPs in agar degradation.

CONCLUSIONS

To the best of our knowledge, Fe3O4-MNP-treated agar degradation for bioethanol production through process optimization is a simpler, easier, and novel method for commercialization.

A Recombinant Alginate Lyase Algt1 with Potential in Preparing Alginate Oligosaccharides at High-Concentration Substrate

Alginate lyase has been demonstrated as an efficient tool in the preparation of functional oligosaccharides (AOS) from alginate. The high viscosity resulting from the high concentration of alginate poses a limiting factor affecting enzymatic hydrolysis, particularly in the preparation of the fragments with low degrees of polymerization (DP). Herein, a PL7 family alginate lyase Algt from Microbulbifer thermotolerans DSM 19189 was developed and expressed in Pichia pastoris. The recombinant alginate lyase Algt1 was constructed by adopting the structural domain truncation strategy, and the enzymatic activity towards the alginate was improved from 53.9 U/mg to 212.86 U/mg compared to Algt. Algt1 was stable when incubated at 40 °C for 90 min, remaining with approximately 80.9% of initial activity. The analyses of thin-layer chromatography (TLC), fast protein liquid chromatography (FPLC), and electrospray ionization mass spectrometry (ESI-MS) demonstrated that the DP of the minimum identifiable substrate of Algt1 was five, and the main hydrolysis products were AOS with DP 1-4. Additionally, 1-L the enzymatic hydrolysis system demonstrated that Algt1 exhibited an effective degradation at alginate concentrations of up to 20%, with the resulting products of monosaccharides (14.02%), disaccharides (21.10%), trisaccharides (37.08%), and tetrasaccharides (27.80%). These superior properties of Algt1 make it possible to efficiently generate functional AOS with low DP in industrial processing.

Enhancement of galactose uptake for bioethanol production from Eucheuma denticulatum hydrolysate using galactose-adapted yeasts

Eucheuma denticulatum is a red macroalgae with a high carbohydrate content. The fermentable sugars from E. denticulatum were obtained through sequential thermal acid hydrolysis, enzymatic saccharification, and detoxification. Thermal acid hydrolysis of E. denticulatum was optimized under the condition of 10% (w/v) slurry content and 300 mM HNO₃ at 121 ℃ for 90 min. The maximum monosaccharide concentration after thermal acid hydrolysis was 31.0 g/L with an efficiency (E_TAH) of 44.7%. By further enzymatic hydrolysis of pretreated biomass solution under 20 U/mL Cellic CTec2 at 50 ℃ and 160 rpm for 72 h, the maximum monosaccharide concentration reached 79.9 g/L with an efficiency of 66.2% (E_S). To remove 5-hydroxymethylfurfural (5-HMF), a fermentation inhibitor, absorption using 2% activated carbon was performed for 2 min. Ethanol fermentation was performed using wild-type and high galactose-adapted strains of Saccharomyces cerevisiae, Kluyveromyces marxianus, and Candida lusitaniae. As a result, galactose-adapted strains showed higher ethanol production than wild-type strains. Especially, the fermentation result by adaptively evolved S. cerevisiae produced the highest ethanol of 37.6 g/L and with Y_EtOH of 0.48 g/g. Moreover, the transcript level of MIG1 in the galactose-adapted strain was slightly lower than that in the wild-type strain. The application of adaptive evolution of microorganisms was efficient for bioethanol production.

Integration of third generation biofuels with bio-electrochemical systems: Current status and future perspective

Biofuels hold particular promise as these can replace fossil fuels. Algae, in particular, are envisioned as a sustainable source of third-generation biofuels. Algae also produce several low volume high-value products, which enhance their prospects of use in a biorefinery. Bio-electrochemical systems such as microbial fuel cell (MFC) can be used for algae cultivation and bioelectricity production. MFCs find applications in wastewater treatment, CO₂ sequestration, heavy metal removal and bio-remediation. Oxidation of electron donor by microbial catalysts in the anodic chamber gives electrons (reducing the anode), CO_2, and electrical energy. The electron acceptor at the cathode can be oxygen/NO₃ ^-/NO₂ ^-/metal ions. However, the need for a continuous supply of terminal electron acceptor in the cathode can be eliminated by growing algae in the cathodic chamber, as they produce enough oxygen through photosynthesis. On the other hand, conventional algae cultivation systems require periodic oxygen quenching, which involves further energy consumption and adds cost to the process. Therefore, the integration of algae cultivation and MFC technology can eliminate the need of oxygen quenching and external aeration in the MFC system and thus make the overall process sustainable and a net energy producer. In addition to this, the CO₂ gas produced in the anodic chamber can promote the algal growth in the cathodic chamber. Hence, the energy and cost invested for CO₂ transportation in an open pond system can be saved. In this context, the present review outlines the bottlenecks of first- and second-generation biofuels along with the conventional algae cultivation systems such as open ponds and photobioreactors. Furthermore, it discusses about the process sustainability and efficiency of integrating algae cultivation with MFC technology in detail.

A review on current advances in the energy and cost effective pretreatments of algal biomass: Enhancement in liquefaction and biofuel recovery

The main downside of utilizing algal biomass for biofuel production is the rigid cell wall which confines the availability of soluble organics to hydrolytic microbes during biofuel conversion. This constraint reduces the biofuel production efficiency of algal biomass. On the other hand, presenting various pretreatment methods before biofuel production affords cell wall disintegration and enhancement in biofuel generation. The potential of pretreatment methods chiefly relies on the extent of biomass liquefaction, energy, and cost demand. In this review, different pretreatments employed to disintegrate algal biomass were conferred in depth with detailed information on their efficiency in enhancing liquefaction and biofuel yield for pilot-scale implementation. Based on this review, it has been concluded that combinative and phase-separated pretreatments provide virtual input in enhancing the biofuel generation based on liquefaction potential, energy, and cost. Future studies should focus on decrement in cost and energy requirement of pretreatment in depth.

Production of bioethanol from food waste: Status and perspectives

There is an immediate global requirement for an ingenious strategy for food waste conversion to biofuels in order to replace fossil fuels with renewable resources. Food waste conversion to bioethanol could lead to a sustainable process having the dual advantage of resolving the issue of food waste disposal as well as meeting the energy requirements of the increasing population. Food waste is increasing at the rate of 1.3 billion tonnes per year, considered to be one-third of global food production. According to LCA studies discarding these wastes is detritus to the environment, therefore; it is beneficial to convert the food waste into bioethanol. The CO₂ emission in this process offers zero impact on the environment as it is biogenic. Among several pretreatment strategies, hydrothermal pretreatment could be a better approach for pretreating food waste because it solubilizes organic solids, resulting in an increased recovery of fermentable sugars to produce bioenergy.

Activation of galactose utilization by the addition of glucose for the fermentation of agar hydrolysate using Lactobacillus brevis ATCC 14869

OBJECTIVE

To investigate the application of carbon catabolite repression (CCR) relaxed Lactobacillus brevis ATCC 14869 in the utilization of agar hydrolysate to produce bioethanol and lactic acid through fermentation.

RESULTS

As a single carbon source, galactose was not metabolized by L. brevis. However, L. brevis consumed galactose simultaneous to glucose and ceased cell growth after depletion of glucose. For complete use of galactose from agar hydrolysis, glucose need to be periodically replenished into the growth medium. Overall, L. brevis successfully used agar hydrolysate and produced 17.2 g/L of ethanol and 31.9 g/L of lactic acid. The maximum specific cell growth rate on galactose and glucose mixture was the same with the glucose-only medium at 0.12 h^-1. The molar product yields from glucose for lactic acid and ethanol were 1.02 and 0.95 respectively, equal to values obtained from the simultaneous utilization of glucose and galactose.

CONCLUSION

In contribution to the ongoing efforts to utilize marine biomass, the relaxed CCR in Lactobacillus brevis ATCC 14869 was herein exploited to produce bioethanol and lactic acid from red seaweed hydrolysates.

Bioconversion of the Brown Tunisian Seaweed Halopteris scoparia: Application to Energy

The brown Tunisian seaweed Halopteris scoparia was used as a feedstock for producing renewable bioethanol, biogas, and biodiesel to demonstrate the proof of concept for the North African energy sector. A quantitative and qualitative quantification of H. scoparia composition using different colorimetric methods was completed to highlight its bioconversion potential. These substrate inputs were subjected to anaerobic fermentation by Saccharomyces cerevisiae to produce bioethanol. The materials were also used to generate bio-hydrogen and volatile fatty acids during dark fermentation by a bacterial consortium and using the oleaginous yeast Yarrowia lipolytica. The lipids were extracted and trans-esterified to Fatty Acid Methyl Esters (FAMEs), and their profiles were then analyzed with gas chromatography (GC). A significant ratio of the bioethanol, e.g., 0.35 g ethanol/g DW substrate, was produced without pretreatment, consistent with the theoretical Gay-Lussac yield. The production of the biohydrogen and lipids were up to 1.3 mL H2/g DW substrate and 0.04 g/g DW substrate, respectively, from the raw biomass. These results were higher than those reported for other well-studied seaweeds such as L. japonica. Overall, this work contributes to the current investigations in Tunisia for producing alternative energies from algae and finding new solutions to the current energy situation and environmental challenges in Maghreb.

Fuelling the future of sustainable sugar fermentation across generations

Biomanufacturing in the form of industrial sugar fermentation is moving beyond pharmaceuticals and biofuels into chemicals, materials, and food ingredients. As the production scale of these increasingly consumer-facing applications expands over the next decades, considerations regarding the environmental impact of the renewable biomass feedstocks used to extract fermentable sugars will become more important. Sugars derived from first-generation biomass in the form of, for example, corn and sugarcane are easily accessible and support high-yield fermentation processes, but are associated with the environmental impacts of industrial agriculture, land use, and competition with other applications in food and feed. Fermentable sugars can also be extracted from second- and third-generation feedstocks in the form of lignocellulose and macroalgae, respectively, potentially overcoming some of these concerns. Doing so, however, comes with various challenges, including the need for more extensive pretreatment processes and the fermentation of mixed and unconventional sugars. In this review, we provide a broad overview of these three generations of biomass feedstocks, outlining their challenges and prospects for fuelling the industrial fermentation industry throughout the 21st century.

Recent Advances in Bioutilization of Marine Macroalgae Carbohydrates: Degradation, Metabolism, and Fermentation

Marine macroalgae are considered renewable natural resources due to their high carbohydrate content, which gives better utilization value in biorefineries and higher value conversion than first- and second-generation biomass. However, due to the diverse composition, complex structure, and rare metabolic pathways of macroalgae polysaccharides, their bioavailability needs to be improved. In recent years, enzymes and pathways related to the degradation and metabolism of macroalgae polysaccharides have been continuously developed, and new microbial fermentation platforms have emerged. Aiming at the bioutilization and transformation of macroalgae resources, this review describes the latest research results from the direction of green degradation, biorefining, and metabolic pathway design, including summarizing the the latest biorefining technology and the fermentation platform design of agarose, alginate, and other polysaccharides. This information will provide new research directions and solutions for the biotransformation and utilization of marine macroalgae.

Metabolic engineering for valorization of macroalgae biomass

Marine macroalgae have huge potential as feedstocks for production of a wide spectrum of chemicals used in biofuels, biomaterials, and bioactive compounds. Harnessing macroalgae in these ways could promote wellbeing for people while mitigating climate change and environmental destruction linked to use of fossil fuels. Microorganisms play pivotal roles in converting macroalgae into valuable products, and metabolic engineering technologies have been developed to extend their native capabilities. This review showcases current achievements in engineering the metabolisms of various microbial chassis to convert red, green, and brown macroalgae into bioproducts. Unique features of macroalgae, such as seasonal variation in carbohydrate content and salinity, provide the next challenges to advancing macroalgae-based biorefineries. Three emerging engineering strategies are discussed here: (1) designing dynamic control of metabolic pathways, (2) engineering strains of halophilic (salt-tolerant) microbes, and (3) developing microbial consortia for conversion. This review illuminates opportunities for future research communities by elucidating current approaches to engineering microbes so they can become cell factories for the utilization of macroalgae feedstocks.

Biostimulants in Viticulture: A Sustainable Approach against Biotic and Abiotic Stresses

Climate change and disproportionate anthropogenic interventions, such as the excess of phytopharmaceutical products and continuous soil tillage, are jeopardizing viticulture by subjecting plants to continuous abiotic stress. One of the main physiological repercussions of abiotic stress is represented by the unbalanced redox homeostasis due to the overproduction of reactive oxygen species (ROS), ultimately leading to a state of oxidative stress (detrimental to grape quality). To these are added the direct and indirect damages caused by pathogens (biotic stresses). In light of this scenario, it is inevitable that sustainable techniques and sensitivity approaches for environmental and human health have to be applied in viticulture. Sustainable viticulture can only be made with the aid of sustainable products. Biostimulant (PB) applications (including resistance inducers or elicitors) in the vineyard have become interesting maneuvers for counteracting vine diseases and improving grape quality. These also represent a partial alternative to soil fertilization by improving nutrient absorption and avoiding its leaching into the groundwater. Their role as elicitors has important repercussions in the stimulation of the phenylpropanoid pathway by triggering the activation of several enzymes, such as polyphenol oxidase, lipoxygenase, phenylalanine ammonia-lyase, and peroxidase (with the accumulation of phenolic compounds). The present review paper summarizes the PBs' implications in viticulture, gathering historical, functional, and applicative information. This work aims to highlight the innumerable beneficial effects on vines brought by these products. It also serves to spur the scientific community to a greater contribution in investigating the response mechanisms of the plant to positive inductions.

Reagentless D-Tagatose Biosensors Based on the Oriented Immobilization of Fructose Dehydrogenase onto Coated Gold Nanoparticles- or Reduced Graphene Oxide-Modified Surfaces: Application in a Prototype Bioreactor

As electrode nanomaterials, thermally reduced graphene oxide (TRGO) and modified gold nanoparticles (AuNPs) were used to design bioelectrocatalytic systems for reliable D-tagatose monitoring in a long-acting bioreactor where the valuable sweetener D-tagatose was enzymatically produced from a dairy by-product D-galactose. For this goal D-fructose dehydrogenase (FDH) from Gluconobacter industrius immobilized on these electrode nanomaterials by forming three amperometric biosensors: AuNPs coated with 4-mercaptobenzoic acid (AuNP/4-MBA/FDH) or AuNPs coated with 4-aminothiophenol (AuNP/PATP/FDH) monolayer, and a layer of TRGO on graphite (TRGO/FDH) were created. The immobilized FDH due to changes in conformation and spatial orientation onto proposed electrode surfaces catalyzes a direct D-tagatose oxidation reaction. The highest sensitivity for D-tagatose of 0.03 ± 0.002 μA mM⁻¹cm⁻² was achieved using TRGO/FDH. The TRGO/FDH was applied in a prototype bioreactor for the quantitative evaluation of bioconversion of D-galactose into D-tagatose by L-arabinose isomerase. The correlation coefficient between two independent analyses of the bioconversion mixture: spectrophotometric and by the biosensor was 0.9974. The investigation of selectivity showed that the biosensor was not active towards D-galactose as a substrate. Operational stability of the biosensor indicated that detection of D-tagatose could be performed during six hours without loss of sensitivity.

Current knowledge and future perspectives of the use of seaweeds for livestock production and meat quality: a systematic review

The effects of dietary macroalgae, or seaweeds, on growth performance and meat quality of livestock animal species are here reviewed. Macroalgae are classified into Phaeophyceae (brown algae), Rhodophyceae (red algae) and Chlorophyceae (green algae). The most common macroalga genera used as livestock feedstuffs are: Ascophyllum, Laminaria and Undaria for brown algae; Ulva, Codium and Cladophora for green algae; and Pyropia, Chondrus and Palmaria for red algae. Macroalgae are rich in many nutrients, including bioactive compounds, such as soluble polysaccharides, with some species being good sources of n-3 and n-6 polyunsaturated fatty acids. To date, the incorporation of macroalgae in livestock animal diets was shown to improve growth and meat quality, depending on the alga species, dietary level and animal growth stage. Generally, Ascophyllum nodosum can increase average daily gain (ADG) in ruminant and pig mostly due to its prebiotic activity in animal's gut. A. nodosum also enhances marbling score, colour uniformity and redness, and can decrease saturated fatty acids in ruminant meats. Laminaria sp., mainly Laminaria digitata, increases ADG and feed efficiency, and improves the antioxidant potential of pork. Ulva sp., and its mixture with Codium sp., was shown to improve poultry growth at up to 10% feed. Therefore, seaweeds are promising sustainable alternatives to corn and soybean as feed ingredients, thus attenuating the current competition among food-feed-biofuel industries. In addition, macroalgae can hinder eutrophication and participate in bioremediation. However, some challenges need to be overcome, such as the development of large-scale and cost-effective algae production methods and the improvement of algae digestibility by monogastric animals. The dietary inclusion of Carbohydrate-Active enZymes (CAZymes) could allow for the degradation of recalcitrant macroalga cell walls, with an increase of nutrients bioavailability. Overall, the use of macroalgae as feedstuffs is a promising strategy for the development of a more sustainable livestock production.

Biofuel production from Macroalgae: present scenario and future scope

The current fossil fuel reserves are not sufficient to meet the increasing demand and very soon will become exhausted. Pollution, global warming, and inflated oil prices have led the quest for renewable energy sources. Macroalgae (green, brown, and red marine seaweed) is gaining popularity as a viable and promising renewable source for biofuels production. Numerous researches have been conducted to access the potential of macroalgae for generating diverse bioproducts such as biofuels. The existence of components such as carbohydrates and lipids, and the lack or deficiency of lignin, create macroalgae an enviable feedstock for biofuels generation. This review briefly covers the potential macroalgal species promoting the production of biofuels and their cultivation methods. It also illustrates the biofuel generation pathway and its efficiency along with the recent techniques to accelerate the product yield. In addition, the current analysis focuses on a cost-effective sustainable generation of biofuel along with commercialization and scaleup.

Modelling of fermentative bioethanol production from indigenous Ulva prolifera biomass by Saccharomyces cerevisiae NFCCI1248 using an integrated ANN-GA approach

Third generation biomass (marine macroalgae) has been projected as a promising alternative energy resource for bioethanol production due to its high carbon and no lignin composition. However, the major challenge in the technologies of production lies in the fermentative bioconversion process. Therefore, in the present study the predictive ability of an integrated artificial neural network with genetic algorithm (ANN-GA) in the modelling of bioethanol production was investigated for an indigenous marine macroalgal biomass (Ulva prolifera) by a novel yeast strain, Saccharomyces cerevisiae NFCCI1248 using six fermentative parameters, viz., substrate concentration, fermentation time, inoculum size, temperature, agitation speed and pH. The experimental model was developed using one-variable-at-a-time (OVAT) method to analyze the effects of the fermentative parameters on bioethanol production and the obtained regression equation was used as a fitness function for the ANN-GA modelling. The ANN-GA model predicted a maximum bioethanol production at 30 g/L substrate, 48 h fermentation time, 10% (v/v) inoculum, 30 °C temperature, 50 rpm agitation speed and pH 6. The maximum experimental bioethanol yield obtained after applying ANN-GA was 0.242 ± 0.002 g/g RS, which was in close proximity with the predicted value (0.239 g/g RS). Hence, the developed ANN-GA model can be applied as an efficient approach for predicting the fermentative bioethanol production from macroalgal biomass.

Ethanol Production from Olive Stones through Liquid Hot Water Pre-Treatment, Enzymatic Hydrolysis and Fermentation. Influence of Enzyme Loading, and Pre-Treatment Temperature and Time

Olive table industry, olive mills and olive pomace oil extraction industries annually generate huge amounts of olive stones. One of their potential applications is the production of bioethanol by fractionation of their lignocellulose constituents and subsequent fermentation of the released sugars using yeasts. In this work, we studied the influence of temperature (175–225 °C) and residence time (0–5 min) in the liquid hot-water pre-treatment of olive stones as well as the initial enzyme loading (different mixtures of cellulases, hemicellulases and β–glucosidases) in the later enzymatic hydrolysis on the release of fermentable sugars. The Chrastil’s model was applied to the d-glucose data to relate the severity of pre-treatment to enzyme diffusion through the pre-treated cellulose. Finally, the hydrolysate obtained under the most suitable conditions (225 °C and 0 min for pre-treatment; 24 CE initial enzyme concentration) was fermented into ethanol using the yeast Pachysolen tannophilus ATCC 32691. Considering the overall process, 6.4 dm3 ethanol per 100 kg olive stones were produced.

Acidolysis as a biorefinery approach to producing advanced bioenergy from macroalgal biomass: A state-of-the-art review

Facing fossil fuels consumption and its accompanying environmental pollution, macroalgae, as a major part of the third-generation (3G) biomass, has great potential for bioenergy development due to its species-abundant, renewable and carbohydrate-rich properties. Diluted acid treatment is one of the most effective approaches to releasing fermentable sugars from macroalgal biomass in a short period, but the optimal conditions need to be explored to maximize the hydrolytic yield for the subsequent microbial conversion. Therefore, this review aims to summarize the latest advances in various acids and other auxiliary methods adopted to increase the hydrolytic efficiency of macroalgae. Following an overview of the strategies of different algal types, methods involved in the bioconversion of biofuels and microbial fuel cells (MFC) from algal hydrolysates are also described. For the 3G biorefinery development, the review further discusses key challenges and trends for future utilizing marine biomass to achieve the large-scale industrial production.

Enhancement of Galactose Uptake from Kappaphycus alvarezii Using Saccharomyces cerevisiae through Deletion of Negative Regulators of GAL Genes

This study was aimed at enhancing galactose consumption from the red seaweed Kappaphycus alvarezii. The optimal pretreatment condition of thermal acid hydrolysis was treated with 350 mM HNO₃ for 60 min at 121 °C. The enzymatic saccharification with a 1:1 mixture of Celluclast 1.5 L and Viscozyme L showed the maximum yield of glucose; 42-g/L monosaccharide concentration was obtained with the highest yield of pretreatment and enzymatic saccharification (E_PS) and the lowest inhibitory compound concentration. The deletion of the GAL80, MIG1, CYC8, or TUP1 gene was performed to improve the galactose consumption rate. The strains with the deletion of the MIG1 gene (mig1Δ) showed higher galactose consumption rate and ethanol yield than other strains. High transcription levels of regulatory genes revealed that the mig1Δ relieved glucose repression. These results show that the mig1Δ enhances galactose consumption rate from K. alvarezii.

Algae as potential feedstock for the production of biofuels and value-added products: Opportunities and challenges

The current review explores the potential application of algal biomass for the production of biofuels and bio-based products. The variety of processes and pathways through which bio-valorization of algal biomass can be performed are described in this review. Various lipid extraction techniques from algal biomass along with transesterification reactions for biodiesel production are briefly discussed. Processes such as the pretreatment and saccharification of algal biomass, fermentation, gasification, pyrolysis, hydrothermal liquefaction, and anaerobic digestion for the production of biohydrogen, bio-oils, biomethane, biochar (BC), and various bio-based products are reviewed in detail. The biorefinery model and its collaborative approach with various processes are highlighted for the production of eco-friendly, sustainable, and cost-effective biofuels and value-added products. The authors also discuss opportunities and challenges related to bio-valorization of algal biomass and use their own perspective regarding the processes involved in production and the feasibility to make algal research a reality for the production of biofuels and bio-based products in a sustainable manner.

Recent trends on seaweed fractionation for liquid biofuels production

Concerns about fossil fuels depletion has led to seek for new sources of energy. The use of marine biomass (seaweed) to produce biofuels presents widely recognized advantages over terrestrial biomasses such as higher production ratio, higher photosynthetic efficiency or carbon-neutral emissions. In here, interesting seaweed sources as a whole or as a residue from seaweed processing industries for biofuel production were identified and their diverse composition and availability compiled. In addition, the pretreatments used for seaweed fractionation were thoroughly revised as this step is pivotal in a seaweed biorefinery for integral biomass valorization and for enabling biomass-to-biofuel economic feasibility processes. Traditional and emerging technologies were revised, with particular emphasis on green technologies, relating pretreatment not only with the type of biomass but also with the final target product(s) and yields. Current hurdles of marine biomass-to-biofuel processes were pinpointed and discussed and future perspectives on the development of these processes given.

Optimization of an Industrial Medium from Molasses for Bioethanol Production Using the Taguchi Statistical Experimental-Design Method

The production of bioethanol as a clean liquid fuel in a cost-effective way is highly desired by global energetics. Sugar beet molasses is a renewable and cheap substrate for the production of biotechnological products. Therefore, the aim of the current study was the optimization of an industrial medium from molasses for bioethanol production using the Taguchi statistical experimental-design method. First, the growth rate of yeast cells and the amount of ethanol produced by the Saccharomyces cerevisiae strain sahand 101 were investigated in aerobic and aerobic–anaerobic conditions. The yeast strain produced 8% (v/v) bioethanol in a medium containing molasses with 18% Brix in aerobic–anaerobic conditions. The main factors of the medium, including molasses, ammonium sulfate, urea, and pH, were optimized for the increase of bioethanol production by the Taguchi method. Bioethanol production reached 10% (v/v) after optimization of the medium in flask culture. The yeast strain produced 11% (v/v) bioethanol in the bioreactor culture containing the optimized medium, which is an acceptable amount of bioethanol produced from molasses at the industrial scale. The results showed that the Taguchi method is an effective method for the design of experiments aiming to optimize the medium for bioethanol production by reducing the number of experiments and time.