Mechanical and geometric changes in the growing femora of BMP-5 deficient mice

Cortical bone relationships are maintained regardless of sex and diet in a large population of LGXSM advanced intercross mice

Introduction

Knowledge of bone structure-function relationships in mice has been based on relatively small sample sets that limit generalizability. We sought to investigate structure-function relationships of long bones from a large population of genetically diverse mice. Therefore, we analyzed previously published data from the femur and radius of male and female mice from the F34 generation of the Large-by-Small advanced intercross line (LGXSM AI), which have over a two-fold continuous spread of bone and body sizes (Silva et al. 2019 JBMR).

Methods

Morphological traits, mechanical properties, and estimated material properties were collected from the femur and radius from 1113 LGXSM AI adult mice (avg. age 25 wks). Males and females fed a low-fat or high-fat diet were evaluated to increase population variation. The data were analyzed using principal component analysis (PCA), Pearson's correlation, and multivariate linear regression.

Results

Using PCA groupings and hierarchical clustering, we identified a reduced set of traits that span the population variation and are relatively independent of each other. These include three morphometry parameters (cortical area, medullary area, and length), two mechanical properties (ultimate force and post-yield displacement), and one material property (ultimate stress). When comparing traits of the femur to the radius, morphological traits are moderately well correlated (r²: 0.18-0.44) and independent of sex and diet. However, mechanical and material properties are weakly correlated or uncorrelated between the long bones. Ultimate force can be predicted from morphology with moderate accuracy for both long bones independent of variations due to genetics, sex, or diet; however, predictions miss up to 50 % of the variation in the population. Estimated material properties in the femur are moderately to strongly correlated with bone size parameters, while these correlations are very weak in the radius.

Discussion

Our results indicate that variation in cortical bone phenotype in the F34 LGXSM AI mouse population can be adequately described by a reduced set of bone traits. These traits include cortical area, medullary area, bone length, ultimate force, post-yield displacement, and ultimate stress. The weak correlation of mechanical and material properties between the femur and radius indicates that the results from routine three-point bending tests of one long bone (e.g., femur) may not be generalizable to another long bone (e.g., radius). Additionally, these properties could not be fully predicted from bone morphology alone, confirming the importance of mechanical testing. Finally, material properties of the femur estimated based on beam theory equations showed a strong dependence on geometry that was not seen in the radius, suggesting that differences in femur size within a study may confound interpretation of estimated material properties.

The BMP Pathway and Its Inhibitors in the Skeleton

Bone morphogenetic proteins (BMPs) constitute the largest subdivision of the transforming growth factor-β family of ligands. BMPs exhibit widespread utility and pleiotropic, context-dependent effects, and the strength and duration of BMP pathway signaling is tightly regulated at numerous levels via mechanisms operating both inside and outside the cell. Defects in the BMP pathway or its regulation underlie multiple human diseases of different organ systems. Yet much remains to be discovered about the BMP pathway in its original context, i.e., the skeleton. In this review, we provide a comprehensive overview of the intricacies of the BMP pathway and its inhibitors in bone development, homeostasis, and disease. We frame the content of the review around major unanswered questions for which incomplete evidence is available. First, we consider the gene regulatory network downstream of BMP signaling in osteoblastogenesis. Next, we examine why some BMP ligands are more osteogenic than others and what factors limit BMP signaling during osteoblastogenesis. Then we consider whether specific BMP pathway components are required for normal skeletal development, and if the pathway exerts endogenous effects in the aging skeleton. Finally, we propose two major areas of need of future study by the field: greater resolution of the gene regulatory network downstream of BMP signaling in the skeleton, and an expanded repertoire of reagents to reliably and specifically inhibit individual BMP pathway components.

ADAMTS10-mediated tissue disruption in Weill-Marchesani syndrome

Fibrillin microfibrils are extracellular matrix assemblies that form the template for elastic fibres, endow blood vessels, skin and other elastic tissues with extensible properties. They also regulate the bioavailability of potent growth factors of the TGF-β superfamily. A disintegrin and metalloproteinase with thrombospondin motifs (ADAMTS)10 is an essential factor in fibrillin microfibril function. Mutations in fibrillin-1 or ADAMTS10 cause Weill-Marchesani syndrome (WMS) characterized by short stature, eye defects, hypermuscularity and thickened skin. Despite its importance, there is poor understanding of the role of ADAMTS10 and its function in fibrillin microfibril assembly. We have generated an ADAMTS10 WMS mouse model using Clustered Regularly Spaced Interspaced Short Palindromic Repeats and CRISPR associated protein 9 (CRISPR-Cas9) to introduce a truncation mutation seen in WMS patients. Homozygous WMS mice are smaller and have shorter long bones with perturbation to the zones of the developing growth plate and changes in cell proliferation. Furthermore, there are abnormalities in the ciliary apparatus of the eye with decreased ciliary processes and abundant fibrillin-2 microfibrils suggesting perturbation of a developmental expression switch. WMS mice have increased skeletal muscle mass and more myofibres, which is likely a consequence of an altered skeletal myogenesis. These results correlated with expression data showing down regulation of Growth differentiation factor (GDF8) and Bone Morphogenetic Protein (BMP) growth factor genes. In addition, the mitochondria in skeletal muscle are larger with irregular shape coupled with increased phospho-p38 mitogen-activated protein kinase (MAPK) suggesting muscle remodelling. Our data indicate that decreased SMAD1/5/8 and increased p38/MAPK signalling are associated with ADAMTS10-induced WMS. This model will allow further studies of the disease mechanism to facilitate the development of therapeutic interventions.

Establishing biomechanical mechanisms in mouse models: practical guidelines for systematically evaluating phenotypic changes in the diaphyses of long bones

Mice are widely used in studies of skeletal biology, and assessment of their bones by mechanical testing is a critical step when evaluating the functional effects of an experimental perturbation. For example, a gene knockout may target a pathway important in bone formation and result in a "low bone mass" phenotype. But how well does the skeleton bear functional loads; eg, how much do bones deform during loading and how resistant are bones to fracture? By systematic evaluation of bone morphological, densitometric, and mechanical properties, investigators can establish the "biomechanical mechanisms" whereby an experimental perturbation alters whole-bone mechanical function. The goal of this review is to clarify these biomechanical mechanisms and to make recommendations for systematically evaluating phenotypic changes in mouse bones, with a focus on long-bone diaphyses and cortical bone. Further, minimum reportable standards for testing conditions and outcome variables are suggested that will improve the comparison of data across studies. Basic biomechanical principles are reviewed, followed by a description of the cross-sectional morphological properties that best inform the net cellular effects of a given experimental perturbation and are most relevant to biomechanical function. Although morphology is critical, whole-bone mechanical properties can only be determined accurately by a mechanical test. The functional importance of stiffness, maximum load, postyield displacement, and work-to-fracture are reviewed. Because bone and body size are often strongly related, strategies to adjust whole-bone properties for body mass are detailed. Finally, a comprehensive framework is presented using real data, and several examples from the literature are reviewed to illustrate how to synthesize morphological, tissue-level, and whole-bone mechanical properties of mouse long bones.

Transient overexpression of sonic hedgehog alters the architecture and mechanical properties of trabecular bone

Bone formation and remodeling involve coordinated interactions between osteoblasts and osteoclasts through signaling networks involving a variety of molecular pathways. We hypothesized that overexpression of Sonic hedgehog (Shh), a morphogen with a crucial role in skeletal development, would stimulate osteoblastogenesis and bone formation in adult animals in vivo. Systemic administration of adenovirus expressing the N-terminal form of Shh into adult mice resulted in a primary increase in osteoblasts and their precursors. Surprisingly, however, this was associated with altered trabecular morphology, decreased bone volume, and decreased compressive strength in the vertebrae. Whereas no change was detected in the number of osteoclast precursors, bone marrow stromal cells from Shh-treated mice showed enhanced osteoclastogenic potential in vitro. These effects were mediated by the PTH/PTH-related protein (PTHrP) pathway as evidenced by increased sensitivity to PTH stimulation and upregulation of the PTH/PTHrP receptor (PPR). Together, these data show that Shh has stimulatory effects on osteoprogenitors and osteoblasts in adult animals in vivo, which results in bone remodeling and reduced bone strength because of a secondary increase in osteoclastogenesis.

Hemodynamic forces, vascular oxidative stress, and regulation of BMP-2/4 expression

Changes in the hemodynamic environment (e.g., hypertension, disturbed-flow conditions) are known to promote atherogenesis by inducing proinflammatory phenotypic alterations in endothelial and smooth muscle cells; however, the mechanisms underlying mechanosensitive induction of inflammatory gene expression are not completely understood. Bone morphogenetic protein-2 and -4 (BMP-2/4) are TGF-beta superfamily cytokines that are expressed by both endothelial and smooth muscle cells and regulate a number of cellular processes involved in atherogenesis, including vascular calcification and endothelial activation. This review considers how hemodynamic forces regulate BMP-2/4 expression and explores the role of mechanosensitive generation of reactive oxygen species by NAD(P)H oxidases in the control of BMP signaling.

Effect of y2 receptor deletion on whole bone structural behavior in mice

Recent evidence has shown that mice deficient in the NPY Y2 receptor have an increase in trabecular bone volume as well as cortical bone mass due to increased osteoblast activity. However, the mechanical phenotype of Y2 -/- bone has not yet been assessed. Thus, the aim of the present study was to examine the effect of Y2 deletion on murine cortical bone structural behavior, as well as to assess the material and geometric contributions to that behavior. The results of this study indicate that Y2 -/- mice on a 129 SV x Balb/c background strain are smaller in body mass and have smaller bones than wild-type controls. As expected based on smaller bone cross-sectional properties, cortical bone structural strength was lower in -/- animals. Surprisingly, the structural stiffness of -/- bones was comparable to that of +/+ bones despite their smaller cross-sectional geometry. Comparable structural stiffness appeared to be achieved by means of an elevated effective shear modulus, which was associated with a small, but statistically significant, higher ash content in Y2 -/- bones. These data represent the first comprehensive characterization of the effect of Y2 deletion on cortical bone structural and material behavior to date.

Bone morphogenetic proteins 5 and 6 stimulate osteoclast generation

Bone regeneration is required for fracture-healing, and different procedures have been used to promote osteogenesis. Recently, BMP-2 has been shown to induce bone formation in vivo and has been tested in clinical trials. A recent in vitro study evaluated the osteogenic activity of 14 BMPs on osteoblastic progenitor cells with an osteogenic hierarchical model in which BMP-2 and BMP-6 may play an important role in inducing osteoblast differentiation. Although the relative osteoinductive activity of each BMP is important, bone regeneration is a process consisting of bone formation and bone resorption. Therefore, it remains unclear which effects BMP-5 and -6 have on the generation of osteoclasts and by which mechanism osteoclastogenesis is stimulated. To compare osteoclastic potency of each BMP, primary murine bone marrow cells were treated with human recombinant BMP-2, BMP-5, or BMP-6 and 1,25-(OH)2 vitamin D3 and stained for the TRAP enzyme. Osteogenic activity of BMP-5 was determined by measuring induction of ALP-activity and proliferation after incubation with primary murine osteoblasts. For elucidating the molecular mechanism, primary bone marrow cells with various concentrations of OPG were added to the TRAP assay and mRNA levels of RANKL and OPG were measured after stimulation with BMP-5. The presented data show that BMP-5 and BMP-6, unlike BMP-2, enhanced the formation of murine TRAP+/MNCs in a biphasic curve. BMP-5 and -6 were less potent in stimulating osteoclastogenesis compared to BMP-2. Concerning the effects of BMP-5 on osteoblasts, there was a dose-dependent increase of ALP activity and proliferation up to a maximum dose of 300 ng/mL. At the mRNA level, BMP-5 increased the RANKL/OPG ratio. In conclusion, this study demonstrates that in contrast to BMP-2, BMP-5 and -6 influences the generation of osteoclasts in a biphasic mode. Both proteins might be very important regulators of bone homeostasis, and therefore, potent candidates for future treatment strategies of bone regeneration.

Geometric and material contributions to whole bone structural behavior in GDF-7-deficient mice

The growth/differentiation factors (GDFs) are a subfamily of bone morphogenetic proteins (BMPs) known to play a role in a variety of skeletal processes. Previous work using the brachypod mouse demonstrated that mice deficient in GDF-5 have long bones with diminished material properties and ash content compared with control littermates. Our aim was to examine the role of a related GDF family member, GDF-7 (BMP-12), in cortical bone by examining the geometric and material contributions to whole bone structural behavior in GDF-7-deficient mice. Femora from 16-week-old GDF-7 -/- animals had significantly smaller bone cross-sectional geometric parameters (e.g., -20% medial/lateral and anterior/posterior moments of inertia). Despite having smaller bone cross-sections, all structural parameters obtained from four-point bending tests were comparable to those of wild-type bones due to elevated cortical bone material properties (+18% modulus of elasticity, +28% yield strength, and +18% ultimate strength). No significant differences in ash content or collagen content were detected, however. These data suggest that GDF-7 deficiency is associated with elevated cortical bone material properties that compensate for decreased geometric properties, thereby preserving bone structural integrity. The compositional and/or microstructural bases for these altered material properties remain to be determined, however.

Regulation of Bone Morphogenetic Protein-2 Expression in Endothelial Cells

Background— Recent studies suggest that bone morphogenetic protein-2 (BMP-2), a transforming growth factor-β superfamily member cytokine, plays an important role both in vascular development and pathophysiological processes, including endothelial activation that is likely to contribute to the development of coronary atherosclerosis, yet the factors that regulate arterial expression of BMP-2 are completely unknown. We tested the hypothesis that BMP-2 expression in endothelial cells is governed by an H 2 O 2 and nuclear factor (NF)-κΒ–dependent pathway that can be activated by both proinflammatory and mechanical stimuli.

Methods and Results— The proinflammatory cytokine tumor necrosis factor (TNF)-α induced NF-κΒ activation and elicited significant increases in BMP-2 mRNA and protein in primary coronary arterial endothelial cells and human umbilical vein endothelial cells that were prevented by NF-κΒ inhibitors (pyrrolidine dithiocarbamate and SN-50), silencing of p65 (siRNA), or catalase. Administration of H 2 O 2 also elicited NF-κΒ activation and BMP-2 induction. In organ culture, exposure of rat arteries to high pressure (160 mm Hg) elicited H 2 O 2 production, nuclear translocation of NF-κΒ, and upregulation of BMP-2 expression. Although high pressure upregulated TNF-α, it appears that it directly regulates BMP-2 expression, because upregulation of BMP-2 was also observed in vessels of TNF-α knockout mice.

Conclusions— Vascular BMP-2 expression can be regulated by H 2 O 2 -mediated activation of NF-κΒ both by inflammatory stimuli and by high intravascular pressure.

Skeletal phenotype of growing transgenic mice that express a function-perturbing form of beta1 integrin in osteoblasts

Skeletal modeling entails the deposition of large amounts of extracellular matrix (ECM) to form structures tailored to withstand increasing mechanical loads during rapid growth. Specific ECM molecules bind to integrin receptors on the cell surface, thereby triggering a cascade of signaling events that affect critical cell functions. To evaluate the role of integrins during skeletal growth, transgenic mice were engineered to express a function-perturbing fragment of beta1 integrin consisting of the transmembrane domain and cytoplasmic tail under the control of the osteocalcin promoter (TG mice). Thus, transgene expression was targeted to mature cells of the osteoblast lineage, and herein we show that cultured cells resembling osteocytes from 90-day-old TG mice display impaired adhesion to collagen I, a ligand for beta1 integrin. To determine the influence of beta1 integrin on bones that are responsible for providing structural support during periods of rapid growth, we examined the phenotype of the appendicular skeleton in TG mice compared to wild type (WT) mice. According to radiographs, bones from mice of both genotypes between 14 and 90 days of age appeared similar in gross structure and density, although proximal tibiae from 35-90 days old TG mice were less curved than those of WT mice (72-92% TG/WT). Although there were only mild and transient differences in absolute bone mass and strength, once normalized to body mass, the tibial dry mass (79.1% TG/WT females), ash mass (78.5% TG/WT females), and femoral strength in torsion (71.6% TG/WT females) were reduced in TG mice compared to WT mice at 90 days of age. Similar effects of genotype on bone mass and curvature were observed in 1-year-old retired breeders, indicating that these phenotypic differences between TG and WT mice were stable well into adulthood. Effects of genotype on histomorphometric indices of cancellous bone turnover were minimal and evident only transiently during growth, but when present they demonstrated differences in osteoblast rather than osteoclast parameters. Together, these results suggest that integrin signals generated during growth enhance the acquisition of a skeletal mass, structure, and strength to withstand the mechanical loads generated by weight-bearing.

Altered disc mechanics in mice genetically engineered for reduced type I collagen

STUDY DESIGN

Mechanically test lumbar discs of transgenic mice in compression-tension and torsion.

OBJECTIVES

Determine if a reduction in type I collagen results in decreased disc mechanics.

SUMMARY OF BACKGROUND DATA

Quantitative relationships between disc structure and function would improve the understanding of disc generation and are essential relationships for functional tissue engineering. The reduced type I collagen transgenic mouse has been used in structure-function studies of bone and tendon, but not intervertebral discs. Methods for testing mouse discs have recently been developed, making disc structure-function studies possible.

METHODS

Microradiographed and mechanically tested lumbar discs from control and collagen-reduced mice in both compression-tension and torsion were used. Disc area and polar moment of inertia were determined from radiographic data, stiffness from mechanical data, and apparent modulus from geometric and mechanical data.

RESULTS

Collagen-reduced discs had a larger area and polar moment of inertia compared to controls. The linear and torsional stiffness of collagen-reduced and control discs were not significantly different. Finally, the apparent modulus of collagen-reduced discs was significantly less than controls in compression (73% of control) and torsion (50%).

CONCLUSIONS

Compared to controls, collagen-reduced discs had reduced apparent modulus in both loading directions, suggesting that the transgenic disc tissue was mechanically inferior to controls. These results are consistent with the widely accepted functional role of type I collagen in disc mechanics, and therefore supports the use of transgenic mice to study structure-function relationships of the disc. Future work will focus on quantifying structure-function relationships related to degeneration, as well as those relevant to the design of tissue-engineered disc replacements.

Ash Content Modulation of Torsionally Derived Effective Material Properties in Cortical Mouse Bone

The purpose of this study was to evaluate the effects of isolated alterations in mineral content on mouse bone torsional properties. The femora and tibiae from 25 eight-week-old male A/J strain mice were divided into five groups and selectively decalcified from 5% to 20%. The right femora were then tested to failure in torsion while the tibiae were ashed to determine final mineral content of the decalcified bones. Contralateral femora were serially cross-sectioned to determine geometric properties, and effective material properties were then calculated from the geometric and structural properties of each femoral pair. We found that the relationship between ash content and effective shear modulus or maximum effective shear stress could best be characterized through a power law, with an exponential factor of 6.79 R2=0.85 and 4.04 R2=0.67, respectively. This indicates that in a murine model, as with other species, small changes in ash content significantly influence effective material properties. Furthermore, it appears that (in adolescent A/J strain mice) effective shear modulus is more heavily affected by changes in mineralization than is maximum effective shear stress when these properties are derived from whole bone torsional tests to failure.

The effect of growth/differentiation factor-5 deficiency on femoral composition and mechanical behavior in mice

A subclass of the bone morphogenetic proteins (BMPs), known as growth/differentiation factors (GDFs) 5, 6, and 7, have been shown to affect several skeletal processes, including endochondral ossification, synovial joint formation, and tendon and ligament repair. Mice deficient in GDF-5 have also been shown to exhibit biomechanical abnormalities in tendon that may be associated with altered type I collagen. The purpose of this study was to investigate the effect of GDF-5 deficiency on another type I collagen-rich tissue: cortical bone. Analyses were performed on femora from 8-week-old GDF-5-deficient male brachypodism mice. We hypothesized that GDF-5-deficient bones would exhibit altered geometric, structural, and material properties compared with control littermates. Mutant animals were significantly smaller in body mass than controls (-21%). Geometrically, mutant long bones were significantly shorter (-25%), had a lower polar moment of inertia (-34%), and a lower geometric strength indicator (analogous to the section modulus of a circular section) (-30%). When normalized by body mass, however, geometric differences were no longer significant. Structurally, GDF-5-deficient femora were weaker (-31%) and more compliant (-57%) than controls when tested to failure in torsion. Lower bone structural stiffness in the mutants was not completely explained by the smaller bone geometry, because mutant bones exhibited a significantly lower effective shear modulus (-36%). Although body mass did not fully explain the reduced structural strength in mutant bones, strength differences were adequately explained by bone cross-sectional geometry; maximum effective shear stress was not significantly different between mutants and controls, despite a statistically significant 6% lower ash fraction in mutant femora. No significant difference was detected in collagen content, as indicated by hydroxyproline per dry mass.

Why mechanobiology? A survey article

The central paradigm of skeletal mechanobiology is that mechanical forces modulate morphological and structural fitness of the skeletal tissues-bone, cartilage, ligament and tendon. Traditionally, skeletal biomechanics has focussed on how these tissues perform the structural and locomotory functions of the vertebrate skeleton. In mechanobiology the central question is how these same load-bearing tissues are produced, maintained and adapted by cells as an active response to biophysical stimuli in their environment. The idea that 'form follows function' is not new, but we now believe that the scientific community has the knowledge and tools to prove, understand and use functional adaptation to benefit medicine and human health. In this Survey Article the philosophy and progress of skeletal mechanobiology are discussed. The revival of this science, with roots dating back to the 19th Century, is now driven by new developments in cellular, molecular and computational technologies. These developments are still in an early stage of application, but if modern mechanobiology fulfills the promises of its ambitions, the results will bring great benefits to tissue engineering and to the treatment and prevention of skeletal conditions such as congenital deformities, osteoporosis, osteoarthritis and bone fractures.

Genetic loci determining bone density in mice with diet-induced atherosclerosis

This study investigates the phenotypic and genetic relationships among bone-density-related traits and those of adipose tissue and plasma lipids in mice with diet-induced atherosclerosis. Sixteen-month-old female F2 progeny of a C57BL/6J and DBA/2J intercross, which had received an atherogenic diet for 4 mo, were examined for multiple measures of femoral bone mass, density, and biomechanical properties using both computerized tomographic and radiographic methods. In addition, body weight and length, adipose tissue mass, plasma lipids and insulin, and aortic fatty lesions were assessed. Bone mass was inversely correlated with extent of atherosclerosis and with a prooxidant lipid profile and directly correlated with body weight, length, and, most strongly, adipose tissue mass. Quantitative trait locus (QTL) analysis, using composite interval mapping (CIM) and multi-trait analysis, identified six loci with multi-trait CIM LOD scores > 5. Three of these coincided with loci linked with adipose tissue and plasma high-density lipoprotein. Application of statistical tests for distinguishing close linkage vs. pleiotropy supported the presence of a potential pleiotropic effect of two of the loci on these traits. This study shows that bone mass in older female mice with atherosclerosis has multiple genetic determinants and provides phenotypic and genetic evidence linking the regulation of bone density with adipose tissue and plasma lipids.

The family of bone morphogenetic proteins

The family of bone morphogenetic proteins. Bone morphogenetic proteins (BMPs) are secreted signaling molecules belonging to the transforming growth factor-beta (TGF-beta) superfamily of growth factors. The first BMPs were originally identified by their ability to induce ectopic bone formation when implanted under the skin of rodents. In this ectopic overexpression assay, there was a recapitulation of all the events occurring during skeletogenesis. This latter aspect indicated that these molecules could play important roles during development. More than 30 BMPs have been identified to date. The study of their expression pattern as well as the analysis of spontaneously mutated or genetically depleted mice have demonstrated a much broader range of function. These activities are mainly localized at sites of epithelial-mesenchymal interactions, including but not restricted to the skeleton. This review presents our current knowledge about the functions of BMPs during skeleton development as well as in many other biologic processes.

Growing C57Bl/6 mice increase whole bone mechanical properties by increasing geometric and material properties

In vivo murine models are becoming increasingly important in bone research. To establish baseline data for researchers using these models, we studied the long bones from C57BL/6 female mice, a strain that is widely used in bone research. We determined the femoral structural and material properties in both torsion and four-point bending for mice at ages 4-24 weeks. Measurements of femoral cross-sectional geometry and tibial densitometric properties were also obtained. Results indicated that all structural properties (except ultimate energy), changed significantly with age (p < 0.001). Ultimate torque, ultimate moment, torsional rigidity, and bending rigidity all increased to peak values at 20 weeks, whereas ultimate rotation and ultimate displacement decreased to minimum values at 20 weeks. Our data indicate that increases in the material properties contributed more than increases in cross-sectional geometry to the changes in structural rigidity and ultimate load. For example, from 4-20 weeks torsional rigidity increased 1030%, while shear modulus increased 610% and the polar moment of inertia (a measure of the geometric resistance to rotation) increased by only 85%. Changes in the cross-sectional geometry with age were due to increases in periosteal diameter and decreases in endosteal diameter. In general, both torsion and bending techniques revealed large changes in structural and material properties with age. We conclude that peak bone strength is not achieved before 20 weeks in C57BL/6 female mice, and that torsion and four-point bending tests are equally well suited for evaluating mechanical properties of murine long bones.

BMP-5 deficiency alters chondrocytic activity in the mouse proximal tibial growth plate

The role of bone morphogenetic protein-5 (BMP-5) in regulating chondrocytic activity during endochondral ossification was examined in the mouse proximal tibial growth plate. Short ear mice homozygous for the SEA/Gn point mutation in the coding region for BMP-5 (King, J. A. et al. Dev Biol 166:112122; 1994) and heterozygous long ear littermates were examined at 5 and 9 weeks of age (n = 9/group, four groups). Animals were injected with oxytetracycline to estimate the rate of growth and with bromodeoxyuridine to identify proliferative chondrocytes. Age-related changes in chondrocytic stereological and kinetic parameters were compared by image analysis of 1-microm-thick growth plate sections. The number of proliferative chondrocytes did not vary with age in either genotype, but proliferative phase duration increased significantly (approximately 67%) with age in the long ear mice, whereas no change was detected in the short ear mice. The number of hypertrophic chondrocytes increased significantly (approximately 27%) in the short ears, whereas this number decreased significantly (approximately 40%) in the long ears. There was a small, but significant, increase in hypertrophic phase duration (approximately 45%) in short ear mice, but no change was detected in the long ears. These results indicate that BMP-5 deficiency prevents age-related decelerations in chondrocytic proliferation and initiation of hypertrophic differentiation, suggesting a role of BMP-5 in inhibiting these processes.